ZXR10-LSP-PING-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZXR10-LSP-PING-MIB
Download as:   
SNMPv2-CONF, ZXR10-SMI, SNMPv2-SMI, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxr10LspPingMIB 1.3.6.1.4.1.3902.3.104.5
ZTE LSP-PING MIB
     lspPingTable 1.3.6.1.4.1.3902.3.104.5.1 no-access
lsp ping information table.
         lspPingEntry 1.3.6.1.4.1.3902.3.104.5.1.1 no-access
lsp ping entry.
             lspPingSerial 1.3.6.1.4.1.3902.3.104.5.1.1.1 integer32 read-only
lsp ping serial number
             lspPingType 1.3.6.1.4.1.3902.3.104.5.1.1.2 integer read-write
lsp ping type (0:ldp,1:rsvpTe,2:vccv,3:v6ldp) Enumeration: 'v6ldp': 3, 'vccv': 2, 'ldp': 0, 'rsvpTe': 1.
             lspPingLdpPrefix 1.3.6.1.4.1.3902.3.104.5.1.1.3 ipaddress read-write
ldp prefix
             lspPingLdpPrefixlen 1.3.6.1.4.1.3902.3.104.5.1.1.4 integer32 read-write
ldp prefix length
             lspPingMplsTeTunnelIfName 1.3.6.1.4.1.3902.3.104.5.1.1.5 displaystring read-write
tunnel name
             lspPingPwDestAddr 1.3.6.1.4.1.3902.3.104.5.1.1.8 ipaddress read-write
vccv target address
             lspPingPwDestVcId 1.3.6.1.4.1.3902.3.104.5.1.1.9 unsigned32 read-write
target vc id
             lspPingIfOption 1.3.6.1.4.1.3902.3.104.5.1.1.11 integer read-write
if select option, default:none Enumeration: 'none': 0, 'option': 1.
             lspPingPacketCount 1.3.6.1.4.1.3902.3.104.5.1.1.12 integer32 read-write
send packets count, default:5
             lspPingTimeOut 1.3.6.1.4.1.3902.3.104.5.1.1.13 integer32 read-write
timeout, default:2
             lspPingDataLen 1.3.6.1.4.1.3902.3.104.5.1.1.14 integer32 read-write
data length, default:120
             lspPingTrapOncompletion 1.3.6.1.4.1.3902.3.104.5.1.1.15 truthvalue read-write
if trap
             lspPingRosStatus 1.3.6.1.4.1.3902.3.104.5.1.1.16 integer read-write
Controls to start lsp ping Enumeration: 'notActive': 1, 'startPing': 2, 'pingCompleted': 4, 'pingProcessing': 3.
             lspPingEntryOwner 1.3.6.1.4.1.3902.3.104.5.1.1.17 displaystring read-write
lsp ping entry owner
             lspPingPwType 1.3.6.1.4.1.3902.3.104.5.1.1.18 integer read-write
pw type:ehter-vlan(0),ether(1),default (0) Enumeration: 'ether': 1, 'etherVlan': 0.
             lspPingPwName 1.3.6.1.4.1.3902.3.104.5.1.1.19 displaystring read-write
pw name
             zxr10LspPingPwMultiSegment 1.3.6.1.4.1.3902.3.104.5.1.1.20 truthvalue read-write
Indicate if the pw is multi-segment or not.
             zxr10LspPingLspType 1.3.6.1.4.1.3902.3.104.5.1.1.21 integer read-write
te-tunnel lsp type Enumeration: 'tunnel': 3, 'slave': 2, 'master': 1.
             zxr10LspPingV6LdpPrefix 1.3.6.1.4.1.3902.3.104.5.1.1.22 ipv6address read-write
ldp IPv6 prefix
             zxr10LspPingV6LdpPrefixlen 1.3.6.1.4.1.3902.3.104.5.1.1.23 integer32 read-write
ldp IPv6 prefix length
             zxr10LspPingSrcIpAddr 1.3.6.1.4.1.3902.3.104.5.1.1.24 ipaddress read-write
source IP address
             zxr10LspPingV6SrcIpAddr 1.3.6.1.4.1.3902.3.104.5.1.1.25 ipv6address read-write
IPv6 source IP address
             zxr10LspPingOutInterface 1.3.6.1.4.1.3902.3.104.5.1.1.26 displaystring read-write
out interface for tracing packets
             zxr10LspPingTtl 1.3.6.1.4.1.3902.3.104.5.1.1.27 integer32 read-write
ttl
             zxr10LspPingReplyMode 1.3.6.1.4.1.3902.3.104.5.1.1.28 integer read-write
ReplyMode Enumeration: 'routerAlert': 3, 'notReply': 1, 'applicationChannel': 4, 'ip': 2.
             zxr10lspPingPwPeerAddr 1.3.6.1.4.1.3902.3.104.5.1.1.29 ipaddress read-write
vccv target address
             zxr10lspPingPwPeerVcId 1.3.6.1.4.1.3902.3.104.5.1.1.30 unsigned32 read-write
target vc id
     lspPingResultTable 1.3.6.1.4.1.3902.3.104.5.2 no-access
lsp ping result table.
         lspPingResultEntry 1.3.6.1.4.1.3902.3.104.5.2.1 no-access
lsp ping result entry.
             lspPingResultSerial 1.3.6.1.4.1.3902.3.104.5.2.1.1 integer32 read-only
lsp ping result serial number
             lspPingResultSentPkts 1.3.6.1.4.1.3902.3.104.5.2.1.2 integer32 read-only
send packet
             lspPingResultRcvPkts 1.3.6.1.4.1.3902.3.104.5.2.1.3 integer32 read-only
receive packet
             lspPingResultRoundTripMinTime 1.3.6.1.4.1.3902.3.104.5.2.1.4 integer32 read-only
min RTT
             lspPingResultRoundTripMaxTime 1.3.6.1.4.1.3902.3.104.5.2.1.5 integer32 read-only
max RTT
             lspPingResultRoundTripAvgTime 1.3.6.1.4.1.3902.3.104.5.2.1.6 integer32 read-only
average RTT
             lspPingResultEntryOwner 1.3.6.1.4.1.3902.3.104.5.2.1.9 displaystring read-only
entry owner
             lspPingResultRoundWobbleMinTime 1.3.6.1.4.1.3902.3.104.5.2.1.10 integer32 read-only
max RWT
             lspPingResultRoundWobbleMaxTime 1.3.6.1.4.1.3902.3.104.5.2.1.11 integer32 read-only
max RWT
             lspPingResultRoundWobbleAvgTime 1.3.6.1.4.1.3902.3.104.5.2.1.12 integer32 read-only
average RWT
     lsppingNotifications 1.3.6.1.4.1.3902.3.104.5.3
         lsppingTrapResult 1.3.6.1.4.1.3902.3.104.5.3.1
The newMaster trap indicates that the sending agent has transitioned to 'Master' state.