ZXR10-EFM-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZXR10-EFM-MIB
Download as:   
SNMPv2-CONF, ZXR10-SMI, IF-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxr10ethernetOam 1.3.6.1.4.1.3902.3.902
The MIB module to describe the 802.3ah Ethernet OAM protocol.
         zxr10ethernetOamGlobalObjects 1.3.6.1.4.1.3902.3.902.1
             zxr10ethernetOamGlobalCfgObjects 1.3.6.1.4.1.3902.3.902.1.1
                 zxr10ethernetOamGlobalEnable 1.3.6.1.4.1.3902.3.902.1.1.1 integer read-write
Configure Ethernet OAM enable(0-disable, 1-enable).
                 zxr10ethernetOamOuiInformation 1.3.6.1.4.1.3902.3.902.1.1.2 displaystring read-write
Configure Ethernet OAM OUI information.
                 zxr10ethernetOamRemoteLoopbackTimeout 1.3.6.1.4.1.3902.3.902.1.1.3 unsigned32 read-write
Configure Ethernet OAM remote loopback time-out.
         zxr10ethernetOamIfConfigTable 1.3.6.1.4.1.3902.3.902.2 no-access
Configure Ethernet OAM interface parameters.
             zxr10ethernetOamIfConfigEntry 1.3.6.1.4.1.3902.3.902.2.1 no-access
Configure Ethernet OAM interface config parameters.
                 zxr10ethernetOamifName 1.3.6.1.4.1.3902.3.902.2.1.1 displaystring read-only
Show interface name.
                 zxr10ethernetOamIfEnable 1.3.6.1.4.1.3902.3.902.2.1.2 integer read-write
Configure interface Ethernet OAM enable(0-disable, 1-enable).
                 zxr10ethernetOamRemoteLoopbackEnable 1.3.6.1.4.1.3902.3.902.2.1.3 integer read-write
Configure Ethernet OAM remote loopback start/stop(0-stop, 1-start). As an interactive operation, zxr10ethernetOamRemoteLoopbackEnable will always be zero(0) because it can not reflect the value be set.
                 zxr10ethernetOamifmode 1.3.6.1.4.1.3902.3.902.2.1.4 unsigned32 read-write
Configure Ethernet OAM mode(0-passive mode, 1-active mode).
                 zxr10ethernetOamiftimeout 1.3.6.1.4.1.3902.3.902.2.1.5 unsigned32 read-write
Configure Ethernet OAM link timeout value, in seconds, to indicate that during this time, if no OAMPDUs can be received, the link will be lost. It is available when zxr10ethernetOamiffastflag is 0.
                 zxr10ethernetOamifLinkMonitorEnable 1.3.6.1.4.1.3902.3.902.2.1.6 integer read-write
Configure Ethernet OAM link monitor enable(0-disable, 1-enable).
                 zxr10ethernetOamifLinkMonitorSymbolPeriodthreshold 1.3.6.1.4.1.3902.3.902.2.1.7 unsigned32 read-write
Configure Ethernet OAM link monitor Symbol Period threshold. Each project has different range and default value of zxr10ethernetOamifLinkMonitorSymbolPeriodthreshold.
                 zxr10ethernetOamifLinkMonitorSymbolPeriodwindow 1.3.6.1.4.1.3902.3.902.2.1.8 unsigned32 read-write
Configure Ethernet OAM link monitor Symbol Period window. Each project has different range, units and default value of zxr10ethernetOamifLinkMonitorSymbolPeriodwindow.
                 zxr10ethernetOamifLinkMonitorFramethreshold 1.3.6.1.4.1.3902.3.902.2.1.9 unsigned32 read-write
Configure Ethernet OAM link monitor Frame threshold. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFramethreshold.
                 zxr10ethernetOamifLinkMonitorFramewindow 1.3.6.1.4.1.3902.3.902.2.1.10 unsigned32 read-write
Configure Ethernet OAM link monitor Frame window. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFramewindow.
                 zxr10ethernetOamifLinkMonitorFramePeriodthreshold 1.3.6.1.4.1.3902.3.902.2.1.11 unsigned32 read-write
Configure Ethernet OAM link monitor Frame Period threshold. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFramePeriodthreshold.
                 zxr10ethernetOamifLinkMonitorFramePeriodwindow 1.3.6.1.4.1.3902.3.902.2.1.12 unsigned32 read-write
Configure Ethernet OAM link monitor Frame Period window. Each project has different range, units and default value of zxr10ethernetOamifLinkMonitorFramePeriodwindow.
                 zxr10ethernetOamifLinkMonitorFrameSecondsthreshold 1.3.6.1.4.1.3902.3.902.2.1.13 unsigned32 read-write
Configure Ethernet OAM link monitor Frame Seconds threshold. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFrameSecondsthreshold.
                 zxr10ethernetOamifLinkMonitorFrameSecondswindow 1.3.6.1.4.1.3902.3.902.2.1.14 unsigned32 read-write
Configure Ethernet OAM link monitor Frame Seconds window. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFrameSecondswindow.
                 zxr10ethernetOamifperiod 1.3.6.1.4.1.3902.3.902.2.1.15 unsigned32 read-write
Configure Ethernet OAM PDU period.
                 zxr10ethernetOamiffastflag 1.3.6.1.4.1.3902.3.902.2.1.16 integer read-only
Ethernet OAM timeout setting mode. The link operates on slow mode and at this mode, hello OAMPDUs transmit in 1 pps rate when zxr10ethernetOamiffastflag is 0. The link operates on fast mode and at this mode, hello OAMPDUs transmit one packet per zxr10ethernetOamifperiod*100 milliseconds when zxr10ethernetOamiffastflag is 1. If zxr10ethernetOamiffastflag is 1, zxr10ethernetOamifTimeoutFast is available other than zxr10ethernetOamiftimeout.
                 zxr10ethernetOamifTimeoutFast 1.3.6.1.4.1.3902.3.902.2.1.17 unsigned32 read-write
Configure Ethernet OAM link timeout value, in milliseconds, to indicate that juring this time, if no OAMPDUs can be received, the link will be lost. It is available when zxr10ethernetOamiffastflag is 1.
                 zxr10ethernetOamifUnidirection 1.3.6.1.4.1.3902.3.902.2.1.18 integer read-write
Configure Ethernet OAM unidirection function enable.
                 zxr10ethernetOamifRmtLbMode 1.3.6.1.4.1.3902.3.902.2.1.19 efm_statevalue read-write
Configure Ethernet OAM capability of responding to remote loopback request.
                 zxr10ethernetOamifRmtLbGuard 1.3.6.1.4.1.3902.3.902.2.1.20 truthvalue read-write
Configure Ethernet OAM guard mode of disabling remote loopback mode from attack. True means recovering local slave state from LB to FWD forcefully.
                 zxr10ethernetOamifVariRetrieval 1.3.6.1.4.1.3902.3.902.2.1.21 efm_statevalue read-write
Configure Ethernet OAM capability of responding to variable request.
                 zxr10EFMSymPerSetIfDownEnable 1.3.6.1.4.1.3902.3.902.2.1.22 integer read-write
Configure the function enable(0-disable, 1-enable) that the event of link monitor Symbol Period notify the interface down.
                 zxr10EFMFrameSetIfDownEnable 1.3.6.1.4.1.3902.3.902.2.1.23 integer read-write
Configure the function enable(0-disable, 1-enable) that the event of link monitor frame notify the interface down.
                 zxr10EFMFramePerSetIfDownEnable 1.3.6.1.4.1.3902.3.902.2.1.24 integer read-write
Configure the function enable(0-disable, 1-enable) that the event of link monitor frame period notify the interface down.
                 zxr10EFMFrameSecSetIfDownEnable 1.3.6.1.4.1.3902.3.902.2.1.25 integer read-write
Configure the function enable(0-disable, 1-enable) that the event of link monitor frame seconds notify the interface down.
                 zxr10EFMSetIfUp 1.3.6.1.4.1.3902.3.902.2.1.26 integer read-write
Set the interface status to up because the event of LM notify the interface to down. As an operation, zxr10EFMSetIfUp will always be got one(1) and be set one(1).
         zxr10ethernetOamShowTable 1.3.6.1.4.1.3902.3.902.3 no-access
Show Ethernet OAM config parameters and state.
             zxr10ethernetOamShowEntry 1.3.6.1.4.1.3902.3.902.3.1 no-access
Show Ethernet OAM interface config parameters and state.
                 zxr10ethernetOamShowDiscovery 1.3.6.1.4.1.3902.3.902.3.1.1 displaystring read-only
Show Ethernet OAM discovery parameters.
                 zxr10ethernetOamShowLinkMonitor 1.3.6.1.4.1.3902.3.902.3.1.2 displaystring read-only
Show Ethernet OAM link monitor parameters.
                 zxr10ethernetOamShowStatistics 1.3.6.1.4.1.3902.3.902.3.1.3 displaystring read-only
Show Ethernet OAM PDU statistics.
         zxr10ethernetOamIfVariableTable 1.3.6.1.4.1.3902.3.902.4 no-access
Configure Ethernet OAM interface variable retrieval operation and parameters.
             zxr10ethernetOamIfVariableEntry 1.3.6.1.4.1.3902.3.902.4.1 no-access
Configure Ethernet OAM interface variable retrieval operation and parameters.
                 zxr10ethernetOamifVariLeafID 1.3.6.1.4.1.3902.3.902.4.1.1 integer no-access
The value of variable leaf id. Supported variable leaf id as follows: value description 236 OAMID 237 OAMAdminState 238 OAMMode 239 OAMRemoteMACaddress 240 OAMRemoteConfiguration 241 OAMRemotePDUConfiguration 242 OAMLocalFlagsField 243 OAMRemoteFlagsField 244 OAMRemoteRevision 245 OAMRemoteState 246 OAMRemoteVendorOUI 247 OAMRemoteVendorSpecificinfo 250 OAMUnsupportedCodesRX 251 OAMInformationTX 252 OAMInformationRX 254 OAMUniqueEventNotificationRX 255 OAMDuplicateEventNotificationRX 256 OAMLoopbackControlTX 257 OAMLoopbackControlRX 258 OAMVariableRequestTX 259 OAMVariableRequestRX 260 OAMVariableResponseTX 261 OAMVariableResponseRX 262 OAMOrganizationSpecificTX 263 OAMOrganizationSpecificRX 264 OAMLocalErrSymPeriodConfig 265 OAMLocalErrSymPeriodEvent 266 OAMLocalErrFrameConfig 267 OAMLocalErrFrameEvent 268 OAMLocalErrFramePeriodConfig 269 OAMLocalErrFramePeriodEvent 270 OAMLocalErrFrameSecsSummaryConfig 271 OAMLocalErrFrameSecsSummaryEvent 272 OAMRemoteErrSymPEriodEvent 273 OAMRemoteErrFrameEvent 274 OAMRemoteErrFramePeriodEvent 275 OAMRemoteErrFrameSecsSummaryEvent 333 OAMDiscoveryState 334 OAMLocalConfiguration 335 OAMLocalPDUConfiguration 336 OAMLocalRevision 337 OAMLocalState 338 OAMUnsupportedCodesTX 339 OAMUniqueEventNotificationTX 340 OAMDuplicateEventNotificationTX
                 zxr10ethernetOamifVariRequest 1.3.6.1.4.1.3902.3.902.4.1.2 integer read-write
Configure interface Ethernet OAM variable request operation. The operation can request MIB attributes, objects and packages, while only MIB attributes can be requested by the device. It can only be set 1 which means request operation, when get 0 only for it's unmeaningful.
                 zxr10ethernetOamifVariResponse 1.3.6.1.4.1.3902.3.902.4.1.3 displaystring read-only
Show interface Ethernet OAM variable response value, as value of set zxr10ethernetOamifVariRequest.