ZTE-AN-REMOTE-UNIT-FILE-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-REMOTE-UNIT-FILE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ZTE-AN-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnRemoteUnitFileMib 1.3.6.1.4.1.3902.1082.20.42
The MIB module for the file management of remote unit.
       zxAnRuFileGlobalObjects 1.3.6.1.4.1.3902.1082.20.42.1
           zxAnRuConfigFileCapabilities 1.3.6.1.4.1.3902.1082.20.42.1.1 bits read-only
The management capabilities of remote unit configuration file updating. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means that the remote unit configuration file updating supports SD card. NOTE: No recommended to display it in NMS. Bits: 'sdCardUpdating': 0.
       zxAnRuFileObjects 1.3.6.1.4.1.3902.1082.20.42.2
           zxAnRuConfigFileObjects 1.3.6.1.4.1.3902.1082.20.42.2.1
               zxAnRuCfManualUpdatingObjects 1.3.6.1.4.1.3902.1082.20.42.2.1.1
                   zxAnRuCfManualUpdatingList 1.3.6.1.4.1.3902.1082.20.42.2.1.1.1 octet string read-write
The list of remote units, each remote unit consists of 'ifIndex'.
                   zxAnRuCfManualUpdatingOperAction 1.3.6.1.4.1.3902.1082.20.42.2.1.1.2 integer read-write
The configuration file operating action. Actions are defined as follows: 1 update all configuration files of remote unit 2 delete a configuration file from remote unit Enumeration: 'update': 1, 'delete': 2.
                   zxAnRuCfManualUpdatingFileTypeId 1.3.6.1.4.1.3902.1082.20.42.2.1.1.3 integer32 read-write
The configuration file type ID. The attribute is only valid when zxAnRuCfManualUpdatingOperAction equals 'delete(2)'.
               zxAnRuConfigFileUpdateTable 1.3.6.1.4.1.3902.1082.20.42.2.1.2 no-access
Remote unit configuration file updating table.
                   zxAnRuConfigFileUpdateEntry 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1 no-access
Remote unit configuration file updating entry.
                       zxAnRuFileRack 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.1 integer32 no-access
The rack No. of OLT.
                       zxAnRuFileShelf 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.2 integer32 no-access
The shelf No. of OLT.
                       zxAnRuFileSlot 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.3 integer32 no-access
The slot No. of OLT.
                       zxAnRuFilePort 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.4 integer32 no-access
The PON port No. of OLT.
                       zxAnRuConfigFileUpdateInstIndex 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.5 integer no-access
The No. of each instance.
                       zxAnRuConfigFileUpdateOnuList 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.6 octet string read-only
The remote unit list in a PON port. The use of 32-octet specifies 256 ONUs. Each octet within this field specifies a set of eight ONUs, with the first octet specifying ONU 1 through 8, the second octet specifying ONU 9 through 16, etc. If a bit has a value of 1, it indicates the ONU is specified, and the default bit value is 0. The bit position values are: bit0: ONU 1 bit1: ONU 2 ... bit255: ONU 256.
                       zxAnRuConfigFileUpdateFileName 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.7 displaystring read-only
The configuration file name, and .XML file is supported. The file name of each instance cannot be duplicated.
                       zxAnRuConfigFileUpdateFileTypeId 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.8 integer32 read-only
The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' indicates the attribute is invalid.
                       zxAnRuConfigFileUpdateActiveMode 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.9 integer read-only
The configuration file activation mode. The attribute is only valid for GPON VoIP service. Enumeration: 'noCall': 2, 'unconditional': 1, 'noEmergencyCall': 3.
                       zxAnRuConfigFileUpdateFLocation 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.10 integer read-only
The configuration file location. Location type is defined as following: 1: file comes from flash. 3: file comes from SD card. Enumeration: 'flash': 1, 'sdCard': 3.
                       zxAnRuConfigFileUpdateStorageDId 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.11 integer32 read-only
The ID of the storage device. The numbering rule is: When zxAnRuConfigFileUpdateFLocation is flash(1), the value is 1 and it indicates flash 1. When zxAnRuConfigFileUpdateFLocation is sdCard(3), the value is 2 and it indicates SD card 1. ...
                       zxAnRuConfigFileUpdateRowStatus 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnRuConfigFileUpdateEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
               zxAnRuCfUpdatingStatusTable 1.3.6.1.4.1.3902.1082.20.42.2.1.3 no-access
Remote unit configuration file updating status information table. Each item in this table records the updating result of remote unit configruation file last time.
                   zxAnRuCfUpdatingStatusEntry 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1 no-access
Remote unit configuration file updating status information entry.
                       zxAnRuCfOnu 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.1 integer32 no-access
The ONU number.
                       zxAnRuCfUpdatingStatusFileTypeId 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.2 integer32 no-access
The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' indicates the attribute is invalid.
                       zxAnRuCfUpdatingStatusFileName 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.3 displaystring read-only
The configuration file name. Null string indicates the attribute is invalid.
                       zxAnRuCfUpdatingStatusActiveMode 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.4 integer read-only
The configuration file activation mode. The attribute is only valid for GPON VoIP service, and for other type configuration file, this attribute value is unconditional. Enumeration: 'noCall': 2, 'unconditional': 1, 'noEmergencyCall': 3.
                       zxAnRuCfUpdatingStatusResult 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.5 integer read-only
The result status of updating configruation file. Enumeration: 'failure': 4, 'inProgress': 2, 'notStarted': 1, 'success': 3.
                       zxAnRuCfUpdatingStatusFailReason 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.6 integer read-only
The failure reason of updating configruation file. Enumeration: 'rebootErr': 9, 'none': 1, 'activateErr': 4, 'notSupport': 12, 'sdDisabled': 23, 'sdNoFile': 24, 'useAbort': 7, 'sdOffine': 22, 'validErr': 6, 'ruDeleted': 10, 'commitErr': 3, 'timeout': 11, 'offline': 8, 'downloadErr': 2, 'crcErr': 5.
                       zxAnRuCfUpdatingStatusProgress 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.7 integer read-only
The percent of updating configruation file.
                       zxAnRuCfUpdatingStatusFLocation 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.8 integer read-only
The configuration file location. Location type is defined as following: 1: file comes from flash. 3: file comes from SD card. Enumeration: 'flash': 1, 'sdCard': 3.
           zxAnRuConfigFile2Objects 1.3.6.1.4.1.3902.1082.20.42.2.2
               zxAnRuConfFile2UpdateTable 1.3.6.1.4.1.3902.1082.20.42.2.2.2 no-access
Remote unit configuration file updating table. Update the ONU configuration file with standard defined procedure or private defined procedure.
                   zxAnRuConfFile2UpdateEntry 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1 no-access
Remote unit configuration file updating entry. Update the ONU configuration file with standard defined procedure or private defined procedure
                       zxAnRuConfFile2UpdtRack 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.1 integer32 no-access
The rack No. of OLT.
                       zxAnRuConfFile2UpdtShelf 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.2 integer32 no-access
The shelf No. of OLT.
                       zxAnRuConfFile2UpdtSlot 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.3 integer32 no-access
The slot No. of OLT.
                       zxAnRuConfFile2UpdtPort 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.4 integer32 no-access
The PON port No. of OLT.
                       zxAnRuConfFile2UpdtOnu 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.5 integer32 no-access
The ONU No.
                       zxAnRuConfFile2UpdtFileTypeId 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.6 integer32 no-access
The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' indicates that it is a private defined procedure.
                       zxAnRuConfFile2UpdtFileName 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.7 displaystring read-only
The configuration file name.
                       zxAnRuConfFile2UpdtActMode 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.8 integer read-only
The configuration file activation mode. The value 1-3 is only valid for GPON VoIP service. Enumeration: 'noCall': 2, 'unconditional': 1, 'noEmergencyCall': 3.
                       zxAnRuConfFile2UpdtRowStatus 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnRuConfigFileUpdateEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
               zxAnRuConfFile2UpdateStatusTable 1.3.6.1.4.1.3902.1082.20.42.2.2.3 no-access
Remote unit configuration file updating status table. Each item in this table records the updating result of remote unit configruation file last time.
                   zxAnRuConfFile2UpdateStatusEntry 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1 no-access
Remote unit configuration file updating status entry.
                       zxAnRuConfFile2UpdtStatFileName 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.1 displaystring read-only
The configuration file name.
                       zxAnRuConfFile2UpdtStatActMode 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.2 integer read-only
The configuration file activation mode. The value 1-3 is only valid for GPON VoIP service. Enumeration: 'noCall': 2, 'unconditional': 1, 'noEmergencyCall': 3.
                       zxAnRuConfFile2UpdtStatStatus 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.3 integer read-only
The status of updating configuration file. Enumeration: 'failure': 4, 'inProgress': 2, 'notStarted': 1, 'success': 3.
                       zxAnRuConfFile2UpdtStatFailRsn 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.4 integer read-only
The failed reason of updating configuration file. Enumeration: 'rebootErr': 9, 'none': 1, 'activateErr': 4, 'notSupport': 12, 'sdDisabled': 23, 'sameConfFile': 25, 'sdNoFile': 24, 'useAbort': 7, 'sdOffine': 22, 'validErr': 6, 'ruDeleted': 10, 'commitErr': 3, 'timeout': 11, 'offline': 8, 'downloadErr': 2, 'crcErr': 5.
                       zxAnRuConfFile2UpdtStatProgress 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.5 integer read-only
The progress of updating configuration file.
       zxAnRuFileConformance 1.3.6.1.4.1.3902.1082.20.42.4
           zxAnRuFileCompliances 1.3.6.1.4.1.3902.1082.20.42.4.1
               zxAnRuFileCompliance 1.3.6.1.4.1.3902.1082.20.42.4.1.1
The compliance statement for SNMP entities which implement the ZTE-AN-REMOTE-UNIT-FILE-MIB.
           zxAnRuFileGroups 1.3.6.1.4.1.3902.1082.20.42.4.2
               zxAnRuFileUpdateGroup 1.3.6.1.4.1.3902.1082.20.42.4.2.1
The collection of objects which are used to configure remote unit configuration file updating management. It will keep the remote unit always running with this configuration file.