ZTE-AN-OPTICAL-MODULE-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-OPTICAL-MODULE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ZTE-AN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnOpticalModuleMib 1.3.6.1.4.1.3902.1082.30.40
This MIB defines zte Access Node managed objects.
       zxAnOpticalModuleGlobalObjects 1.3.6.1.4.1.3902.1082.30.40.1
           zxAnOpticalModuleCapabilities 1.3.6.1.4.1.3902.1082.30.40.1.1 bits read-only
The optical module management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. opticalModuleConfClass (0): value 1 means zxAnOpticalModuleConfClass is supported. opticalAlarmPrfUnit(1): value 1 means some objects in the zxAnOpticalModuleAlmPrfTable will use the new unit, for more information, please see the description of the object in the zxAnOpticalModuleAlmPrfTable. opticalModuleConfTechNorms(2): value 1 means zxAnOpticalModuleConfTechNorms is supported. NOTE: No recommended to display it in NMS. Bits: 'opticalModuleConfClass': 0, 'opticalModuleConfTechNorms': 2, 'opticalAlarmPrfUnit': 1.
           zxAnOptModuleIfShutdownUnplugEn 1.3.6.1.4.1.3902.1082.30.40.1.2 integer read-write
Indicates whether the zxAnOpticalModuleUnpluggedAlm should be generated when the port the optical module plugged in has been shutdown. enabled(1) : The zxAnOpticalOfflineTrapEnable indicates whether the zxAnOpticalModuleUnpluggedAlm should be generated or not. disabled(2): The zxAnOpticalModuleUnpluggedAlm should not be generated. Enumeration: 'disabled': 2, 'enabled': 1.
           zxAnOptModuleFstUnpluggedRptEn 1.3.6.1.4.1.3902.1082.30.40.1.3 integer read-write
Indicates whether the zxAnOpticalModuleUnpluggedAlm should be generated when the agent has detected the optical module is offline for the first time. Enumeration: 'disabled': 2, 'enabled': 1.
       zxAnOpticalModuleObjects 1.3.6.1.4.1.3902.1082.30.40.2
           zxAnOpticalModuleAlmPrfTable 1.3.6.1.4.1.3902.1082.30.40.2.2 no-access
This table includes the optical module threshold profile.
               zxAnOpticalModuleAlmPrfEntry 1.3.6.1.4.1.3902.1082.30.40.2.2.1 no-access
An entry in zxAnOpticalModuleAlmPrfTable.
                   zxAnOpticalModuleAlmPrfName 1.3.6.1.4.1.3902.1082.30.40.2.2.1.1 displaystring no-access
A textual string containing information about the optical module alarm threshold profile name .
                   zxAnOpticalRxPwrLowerThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.2 integer32 read-only
The lower limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue is lower than this threshold. The unit is 1dBm when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1dBm.
                   zxAnOpticalRxPwrUpperThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.3 integer32 read-only
The upper limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue exceeds this threshold. The unit is 1dBm when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1dBm.
                   zxAnOpticalTxPwrLowerThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.4 integer32 read-only
The lower limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue is lower than this threshold. The unit is 1dBm when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1dBm.
                   zxAnOpticalTxPwrUpperThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.5 integer32 read-only
The upper limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue exceeds this threshold. The unit is 1dBm when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1dBm.
                   zxAnOpticalBiasCurrLowerThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.6 integer32 read-only
The lower limit threshold on optical modules bias current.The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold. The unit is 1mA when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1mA.
                   zxAnOpticalBiasCurrUpperThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.7 integer32 read-only
The upper limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold. The unit is 1mA when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1mA.
                   zxAnOpticalVoltageLowerThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.8 integer32 read-only
The lower limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold. The unit is 1 Volt when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1 Volt.
                   zxAnOpticalVoltageUpperThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.9 integer32 read-only
The upper limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold. The unit is 1 Volt when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1 Volt.
                   zxAnOpticalTempLowerThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.10 integer32 read-only
The lower limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature is lower than this threshold.
                   zxAnOpticalTempUpperThresh 1.3.6.1.4.1.3902.1082.30.40.2.2.1.11 integer32 read-only
The upper limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature exceeds this threshold.
                   zxAnOpticalOfflineTrapEnable 1.3.6.1.4.1.3902.1082.30.40.2.2.1.12 integer read-only
Indicates whether optical module is online/offline traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. Enumeration: 'disabled': 2, 'enabled': 1.
                   zxAnOpticalModuleConfClass 1.3.6.1.4.1.3902.1082.30.40.2.2.1.13 displaystring read-only
The optical module configured class.
                   zxAnOpticalModuleAlmPrfRowStatus 1.3.6.1.4.1.3902.1082.30.40.2.2.1.50 rowstatus read-only
The row status of this entry.
           zxAnOpticalAlmPrfIfConfTable 1.3.6.1.4.1.3902.1082.30.40.2.3 no-access
This table includes the optical module profile configuration.
               zxAnOpticalAlmPrfIfConfEntry 1.3.6.1.4.1.3902.1082.30.40.2.3.1 no-access
An entry in zxAnOpticalAlmPrfIfConfTable.
                   zxAnOpticalIfAlmPrf 1.3.6.1.4.1.3902.1082.30.40.2.3.1.2 displaystring read-write
A textual string containing information about the optical module alarm threshold profile name .
           zxAnOpticalModuleInfoTable 1.3.6.1.4.1.3902.1082.30.40.2.4 no-access
This table includes the optical module information.
               zxAnOpticalModuleInfoEntry 1.3.6.1.4.1.3902.1082.30.40.2.4.1 no-access
An entry in zxAnOpticalModuleInfoTable.
                   zxAnOpticalIfRxPwrCurrValue 1.3.6.1.4.1.3902.1082.30.40.2.4.1.2 integer32 read-only
The optical power monitored at the input.
                   zxAnOpticalIfTxPwrCurrValue 1.3.6.1.4.1.3902.1082.30.40.2.4.1.3 integer32 read-only
The optical power monitored at the output.
                   zxAnOpticalIfRate 1.3.6.1.4.1.3902.1082.30.40.2.4.1.4 integer32 read-only
The optical module interface rate.
                   zxAnOpticalBiasCurrent 1.3.6.1.4.1.3902.1082.30.40.2.4.1.5 integer32 read-only
The optical module bias current .
                   zxAnOpticalSupplyVoltage 1.3.6.1.4.1.3902.1082.30.40.2.4.1.6 integer32 read-only
The optical module supply voltage.
                   zxAnOpticalWavelength 1.3.6.1.4.1.3902.1082.30.40.2.4.1.7 integer32 read-only
The optical module wavelength.
                   zxAnOpticalTemperature 1.3.6.1.4.1.3902.1082.30.40.2.4.1.8 integer32 read-only
The optical module temperature .
                   zxAnOpticalFiberType 1.3.6.1.4.1.3902.1082.30.40.2.4.1.9 integer read-only
The optical module Fiber Type. Enumeration: 'unknown': 3, 'multiMode': 2, 'singleMode': 1.
                   zxAnOpticalVersionLevel 1.3.6.1.4.1.3902.1082.30.40.2.4.1.10 displaystring read-only
The optical module vendor Level.
                   zxAnOpticalVendorPn 1.3.6.1.4.1.3902.1082.30.40.2.4.1.11 displaystring read-only
The optical module vendor P/N.
                   zxAnOpticalVendorName 1.3.6.1.4.1.3902.1082.30.40.2.4.1.12 displaystring read-only
The optical module vendor name.
                   zxAnOpticalVendorSn 1.3.6.1.4.1.3902.1082.30.40.2.4.1.13 displaystring read-only
The optical module vendor sn.
                   zxAnOpticalProductionDate 1.3.6.1.4.1.3902.1082.30.40.2.4.1.14 displaystring read-only
The optical module production date.
                   zxAnOpticalModuleType 1.3.6.1.4.1.3902.1082.30.40.2.4.1.15 displaystring read-only
The optical module type.
                   zxAnOpticalFiberInterfaceType 1.3.6.1.4.1.3902.1082.30.40.2.4.1.16 displaystring read-only
The optical fiber interface.
                   zxAnOpticalMaterialNumber 1.3.6.1.4.1.3902.1082.30.40.2.4.1.17 octet string read-only
The material number of pin(A2).
                   zxAnOpticalRegisterData 1.3.6.1.4.1.3902.1082.30.40.2.4.1.18 octet string read-only
The optical module data is from register.
                   zxAnOpticalOtdrSupport 1.3.6.1.4.1.3902.1082.30.40.2.4.1.19 integer read-only
The OTDR is supported by the optical module or not. supported(1): The optical module supports OTDR. unsupported(2): The optical module doesn't support OTDR. unknown(255): Whether the optical module supports OTDR is unknown. Enumeration: 'unknown': 255, 'supported': 1, 'unsupported': 2.
                   zxAnOpticalModuleActualClass 1.3.6.1.4.1.3902.1082.30.40.2.4.1.20 displaystring read-only
The optical module actual class.
                   zxAnOpticalOtdrVersion 1.3.6.1.4.1.3902.1082.30.40.2.4.1.21 displaystring read-only
The optical module OTDR software version. If the optical module doesn't support OTDR or the OTDR has no software version, this object will be set to an empty string.
                   zxAnOpticalTransDistanceSmLongR 1.3.6.1.4.1.3902.1082.30.40.2.4.1.40 integer32 read-only
This value specifies the transfer distance that is supported by the transceiver while operating in compliance with the applicable standards using single mode based long reach fiber. The value is in units of kilometers. A value of 255 means the transceiver supports a transfer distance greater than 254 km. A value of zero means the transceiver does not support single mode fiber or that the transfer distance information must be determined from the transceiver technology.
                   zxAnOpticalTransDistanceSmShortR 1.3.6.1.4.1.3902.1082.30.40.2.4.1.41 integer32 read-only
This value specifies the transfer distance that is supported by the transceiver while operating in compliance with the applicable standards using single mode based short reach fiber. The value is in units of 100 meters. A value of 255 means the transceiver supports a transfer distance greater than 25.4 km. A value of zero means the transceiver does not support single mode fiber or that the transfer distance information must be determined from the transceiver technology.
                   zxAnOpticalTransDistanceOm1 1.3.6.1.4.1.3902.1082.30.40.2.4.1.42 integer32 read-only
This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 62.5 micron multimode OM1(200 MHz*km at 850nm, 500MHz*km at 1310mm) fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a transfer distance greater than 2.54km. A value of zero means that the transceiver does not support 62.5 micron multimode fiber or the transfer distance must determined from the transceiver technology.
                   zxAnOpticalTransDistanceOm2 1.3.6.1.4.1.3902.1082.30.40.2.4.1.43 integer32 read-only
This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 50 micron multimode OM2(500 MHz*km at 850nm) fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a transfer distance greater than 2.54km. A value of zero means that the transceiver does not support OM2 fiber or the transfer distance must determined from the transceiver technology.
                   zxAnOpticalTransDistanceOm3 1.3.6.1.4.1.3902.1082.30.40.2.4.1.44 integer32 read-only
This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 50 micron multimode OM3(2000 MHz*km) fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a transfer distance greater than 2.54km. A value of zero means that the transceiver does not support OM3 fiber or the transfer distance must determined from the transceiver technology.
                   zxAnOpticalTransDistanceCopper 1.3.6.1.4.1.3902.1082.30.40.2.4.1.45 integer32 read-only
This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using copper cable. For active cable, this value represents actual length. The value is in units of 1 meter. A value of 255 means that the transceiver supports a transfer distance greater than 254m. A value of zero means that the transceiver does not support copper or active cables or the transfer distance must determined from the transceiver technology.
                   zxAnOpticalPartNumber 1.3.6.1.4.1.3902.1082.30.40.2.4.1.48 displaystring read-only
The optical module part number.
           zxAnOpticalAlsIfConfTable 1.3.6.1.4.1.3902.1082.30.40.2.5 no-access
This table includes the ALS configuration of the optical module.
               zxAnOpticalAlsIfConfEntry 1.3.6.1.4.1.3902.1082.30.40.2.5.1 no-access
An entry in zxAnOpticalAlsIfConfTable.
                   zxAnOptAlsEnable 1.3.6.1.4.1.3902.1082.30.40.2.5.1.1 integer read-write
Enable or disable the ALS function. Enumeration: 'disabled': 2, 'enabled': 1.
                   zxAnOptAlsLaserLosDuration 1.3.6.1.4.1.3902.1082.30.40.2.5.1.2 integer32 read-write
This attribute specifies the value of the LOS duration. The laser will be shutdown when detected the LOS duration longer than zxAnOptAlsLaserLosDuration value. Setting this object will enable the ALS function. For C300 Series NE, the default value is 5. For C600 Series NE, the default value is 50.
                   zxAnOptAlsLaserShutdownDuration 1.3.6.1.4.1.3902.1082.30.40.2.5.1.3 integer32 read-write
This attribute specifies the value of the laser shutdown duration. Setting this object will enable the ALS function.
                   zxAnOptAlsLaserStartUpDuration 1.3.6.1.4.1.3902.1082.30.40.2.5.1.4 integer32 read-write
This attribute specifies the value of the laser re-open duration. Setting this object will enable the ALS function.
           zxAnOpticalModuleConfTable 1.3.6.1.4.1.3902.1082.30.40.2.6 no-access
This table includes the optical module configuration.
               zxAnOpticalModuleConfEntry 1.3.6.1.4.1.3902.1082.30.40.2.6.1 no-access
An entry in zxAnOpticalModuleConfTable.
                   zxAnOpticalModuleConfVendorName 1.3.6.1.4.1.3902.1082.30.40.2.6.1.1 displaystring no-access
The optical module vendor name.
                   zxAnOpticalModuleConfVendorPn 1.3.6.1.4.1.3902.1082.30.40.2.6.1.2 displaystring no-access
The optical module vendor P/N.
                   zxAnOpticalModuleConfiguredClass 1.3.6.1.4.1.3902.1082.30.40.2.6.1.3 displaystring read-only
The optical module configured class. Includes the following: GPON/B+, GPON/C+, GPON/EC+, XGPON1/N1, XGPON1/N2a, EPON/PX20+, 10G-EPON/PRX30, 10G-EPON/PR30, GPON/D, XGS-PON/N1, XGS-PON/N2, XG-PON&GPON_COMBO/N1-B+, XG-PON&GPON_COMB0/N2-C+, GPON-OTDR/C+.
                   zxAnOpticalModuleConfProperty 1.3.6.1.4.1.3902.1082.30.40.2.6.1.4 integer read-only
The property of the table record. default: the default record, it can't be modified or deleted by the user. userDefined: the user-defined record. Enumeration: 'default': 1, 'userDefined': 2.
                   zxAnOpticalModuleConfTechNorms 1.3.6.1.4.1.3902.1082.30.40.2.6.1.11 displaystring read-only
The optical module configured technical norms.
                   zxAnOpticalModuleConfRowStatus 1.3.6.1.4.1.3902.1082.30.40.2.6.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the rule described in zxAnLacpAggEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
           zxAnOpticalModuleChanInfoTable 1.3.6.1.4.1.3902.1082.30.40.2.10 no-access
This table includes the optical module channel information.
                 zxAnOpticalModuleChanInfoEntry 1.3.6.1.4.1.3902.1082.30.40.2.10.1 no-access
An entry in zxAnOpticalModuleChanInfoTable.
                     zxAnOpticalChanLaserSwitch 1.3.6.1.4.1.3902.1082.30.40.2.10.1.1 integer read-write
Enables or disables the laser function of the optical module channel. Enumeration: 'close': 2, 'open': 1.
                     zxAnOpticalChanWavelength 1.3.6.1.4.1.3902.1082.30.40.2.10.1.2 integer32 read-only
The wavelength of the optical module channel.
                     zxAnOpticalChanCurrTxPwr 1.3.6.1.4.1.3902.1082.30.40.2.10.1.3 integer32 read-only
The transmitted power of the optical module channel.
                     zxAnOpticalChanBiasCurrent 1.3.6.1.4.1.3902.1082.30.40.2.10.1.4 integer32 read-only
The bias current of the optical module channel.
           zxAnOpticalModuleClassValueTable 1.3.6.1.4.1.3902.1082.30.40.2.20 no-access
This table includes the optical module class value. NOTE: No recommended to develop this function in EMS.
                 zxAnOpticalModuleClassValueEntry 1.3.6.1.4.1.3902.1082.30.40.2.20.1 no-access
An entry in zxAnOpticalModuleClassValueTable.
                     zxAnOpticalModuleClassId 1.3.6.1.4.1.3902.1082.30.40.2.20.1.1 integer32 no-access
The optical module class id.
                     zxAnOpticalModuleClassValue 1.3.6.1.4.1.3902.1082.30.40.2.20.1.2 displaystring read-only
The optical module class value.
       zxAnOpticalModuleNotifications 1.3.6.1.4.1.3902.1082.30.40.3
           zxAnOptRxPwrUnderThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.1
It indicates that zxAnOpticalIfRxPwrCurrValue is below the zxAnOpticalRxPwrLowerThresh.
           zxAnOptRxPwrUnderThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.2
zxAnOptRxPwrUnderThreshAlm clear
           zxAnOptRxPwrOverThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.3
It indicates that zxAnOpticalIfRxPwrCurrValue is exceeds the zxAnOpticalRxPwrUpperThresh.
           zxAnOptRxPwrOverThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.4
zxAnOptPwrRxOverThreshAlarm clear.
           zxAnOptTxPwrUnderThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.5
It indicates that zxAnOpticalIfTxPwrCurrValue is below the zxAnOpticalTxPwrLowerThresh.
           zxAnOptTxPwrUnderThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.6
zxAnOptPwrTxUnderThreshAlarm clear
           zxAnOptTxPwrOverThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.7
It indicates that zxAnOpticalIfTxPwrCurrValue is exceeds the zxAnOpticalTxPwrUpperThresh.
           zxAnOptTxPwrOverThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.8
zxAnOptPwrTxOverThreshAlarm clear.
           zxAnOptBiasCurrUnderThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.9
It indicates that zxAnOpticalBiasCurrent is below the zxAnOpticalBiasCurrLowerThresh.
           zxAnOptBiasCurrUnderThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.10
zxAnOptBiasCurrUnderThreshAlm clear.
           zxAnOptBiasCurrOverThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.11
It indicates that zxAnOpticalBiasCurrent is over the zxAnOpticalBiasCurrUpperThresh.
           zxAnOptBiasCurrOverThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.12
zxAnOptBiasCurrOverThreshAlm clear.
           zxAnOptVoltageUnderThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.13
It indicates that zxAnOpticalSupplyVoltage is below the zxAnOpticalVoltageLowerThresh.
           zxAnOptVoltageUnderThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.14
zxAnOptVoltageUnderThreshAlm clear.
           zxAnOptVoltageOverThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.15
It indicates that zxAnOpticalSupplyVoltage is over the zxAnOpticalVoltageUpperThresh.
           zxAnOptVoltageOverThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.16
zxAnOptVoltageOverThreshAlm clear.
           zxAnOptTempUnderThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.17
It indicates that zxAnOpticalTemperature is below the zxAnOpticalTempLowerThresh.
           zxAnOptTempUnderThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.18
zxAnOptTempUnderThreshAlm clear.
           zxAnOptTempOverThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.19
It indicates that zxAnOpticalTemperature is over the zxAnOpticalTempUpperThresh.
           zxAnOptTempOverThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.20
zxAnOptTempOverThreshAlm clear.
           zxAnOpticalModuleUnpluggedAlm 1.3.6.1.4.1.3902.1082.30.40.3.21
The alarm occurred when optical module is not online.
           zxAnOpticalModuleUnpluggedClr 1.3.6.1.4.1.3902.1082.30.40.3.22
The alarm restore when optical module is online.
           zxAnOptModuleClassMismatchAlm 1.3.6.1.4.1.3902.1082.30.40.3.23
A zxAnOptModuleClassMismatchAlm trap is sent when the agent has detected that the optical module has plugged in, but zxAnOpticalModuleConfClass is not same as zxAnOpticalModuleActualClass.
           zxAnOptModuleClassMismatchClr 1.3.6.1.4.1.3902.1082.30.40.3.24
A zxAnOptModuleClassMismatchClr trap is sent when the agent has detected that the optical module has plugged in, and zxAnOpticalModuleConfClass is same as zxAnOpticalModuleActualClass.
           zxAnOptChanTxPwrUnderThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.51
A zxAnOptChanTxPwrUnderThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanCurrTxPwr has been less than the zxAnOpticalTxPwrLowerThresh.
           zxAnOptChanTxPwrUnderThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.52
A zxAnOptChanTxPwrUnderThreshClr trap is sent when the zxAnOptChanTxPwrUnderThreshAlm is cleared.
           zxAnOptChanTxPwrOverThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.53
A zxAnOptChanTxPwrOverThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanCurrTxPwr has been exceeded the zxAnOpticalTxPwrUpperThresh.
           zxAnOptChanTxPwrOverThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.54
A zxAnOptChanTxPwrOverThreshClr trap is sent when the zxAnOptChanTxPwrOverThreshAlm is cleared.
           zxAnOptChanBiasUnderThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.55
A zxAnOptChanBiasUnderThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanBiasCurrent has been less than the zxAnOpticalBiasCurrLowerThresh.
           zxAnOptChanBiasUnderThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.56
A zxAnOptChanBiasCurrUnderThreshClr trap is sent when the zxAnOptChanBiasUnderThreshAlm is cleared.
           zxAnOptChanBiasOverThreshAlm 1.3.6.1.4.1.3902.1082.30.40.3.57
A zxAnOptChanBiasOverThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanBiasCurrent has been exceeded the zxAnOpticalBiasCurrUpperThresh.
           zxAnOptChanBiasOverThreshClr 1.3.6.1.4.1.3902.1082.30.40.3.58
A zxAnOptChanBiasOverThreshClr trap is sent when the zxAnOptChanBiasOverThreshAlm is cleared.
           zxAnOptEponGponMismatchAlm 1.3.6.1.4.1.3902.1082.30.40.3.59
A zxAnOptEponGponMismatchAlm trap is sent when the agent has detected that the GPON optical module is plugged in the EPON port or the EPON optical module is plugged in the GPON port.
           zxAnOptEponGponMismatchClr 1.3.6.1.4.1.3902.1082.30.40.3.60
A zxAnOptEponGponMismatchClr trap is sent when the zxAnOptEponGponMismatchAlm is cleared.
       zxAnOpticalModuleConformance 1.3.6.1.4.1.3902.1082.30.40.4