ZTE-AN-DHCP-SNOOPING-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-DHCP-SNOOPING-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnDhcpSnoopingMib 1.3.6.1.4.1.3902.1082.70.40
This MIB defines DHCP Snooping managed objects for Access Node Service Security and DHCP Snooping is a security mechanism which uses information gathered from DHCP packets to provide per-interface security capabilities
       zxAnDhcpSnoopingGlobalObjects 1.3.6.1.4.1.3902.1082.70.40.1
           zxAnDhcpSnoopingCapabilities 1.3.6.1.4.1.3902.1082.70.40.1.1 bits read-only
The management capabilities of DHCP snooping. The bit value 1 means the function represented by this bit is supported by this equipment. supportIpSrcGuardIpBindingTable(0): value 1 means supporting zxAnIpv4SrcGuardIpBindingTable and zxAnIpv6SrcGuardIpBindingTable, zxAnDsDhcpV4StaticIpBindingTable and zxAnDsDhcpV6StaticIpBindingTable were deprecated. supportIpv4SrcGuardIpBindIpMask(1): value 1 means supporting IPv4 mask configuration: zxAnIpv4SrcGuardIpBindIpMask. NOTE: No recommended to display it in NMS. Bits: 'supportIpSrcGuardIpBindingTable': 0, 'supportIpv4SrcGuardIpBindIpMask': 1.
       zxAnDhcpSnoopingObjects 1.3.6.1.4.1.3902.1082.70.40.2
           zxAnDsDhcpV4Objects 1.3.6.1.4.1.3902.1082.70.40.2.1
               zxAnDsDhcpV4GlobalObjects 1.3.6.1.4.1.3902.1082.70.40.2.1.1
                   zxAnDsDhcpV4GlobalEnable 1.3.6.1.4.1.3902.1082.70.40.2.1.1.1 integer read-write
Enable or disable DHCPv4 snooping. Enumeration: 'disabled': 2, 'enabled': 1.
                   zxAnDsDhcpV4ClearIpBindingEnable 1.3.6.1.4.1.3902.1082.70.40.2.1.1.2 integer read-write
If this object is set to 'enabled', when interface become offline this interface's records in zxAnDsDhcpV4IpBindingTable will be deleted. Otherwise, this interface's records will not be deleted. Enumeration: 'disabled': 2, 'enabled': 1.
                   zxAnDsDhcpV4OnlineUsers 1.3.6.1.4.1.3902.1082.70.40.2.1.1.3 integer32 read-only
The total number of DHCPv4 snooping online users.
               zxAnDsDhcpV4VlanTable 1.3.6.1.4.1.3902.1082.70.40.2.1.2 no-access
This table provides the mechanism to control ipv4 dhcp snooping per vlan. When a vlan is created in a device supporting this table, a corresponding entry of this table will be added. When a vlan is destroyed in a device supporting this table, a corresponding entry of this table will be deleted.
                   zxAnDsDhcpV4VlanEntry 1.3.6.1.4.1.3902.1082.70.40.2.1.2.1 no-access
A row instance contains the configuration to create or destroy ipv4 dhcp snooping at each existing vlan.
                       zxAnDsDhcpV4Vid 1.3.6.1.4.1.3902.1082.70.40.2.1.2.1.1 vlanid no-access
This object indicates the vlan number on which ipv4 dhcp snooping feature is configured.
                       zxAnDsDhcpV4VlanRowStatus 1.3.6.1.4.1.3902.1082.70.40.2.1.2.1.50 rowstatus read-only
This object is used to manage the creation and deletion of rows in this table. It only supports 'active(1)' ,'createAndGo(4)'and 'destroy(6)' value. If this object is set to 'createAndGo(4)', the vlan number on which dhcp snooping is active(1). Setting this object value to destroy(6), the vlan number on which dhcp snooping is deleted.
               zxAnDsDhcpV4IpBindingTable 1.3.6.1.4.1.3902.1082.70.40.2.1.6 no-access
This table provides the ipv4 dhcp snooping bindings information learnt by the interface capable of this feature. The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) for PON card: SubIfType = ONU service port sub-interface(3) for DSL card: SubIfType = DSL PVC sub-interface(6)
                   zxAnDsDhcpV4IpBindingEntry 1.3.6.1.4.1.3902.1082.70.40.2.1.6.1 no-access
A row instance contains the interface number, Mac address, service vlan number, IP address, leased time, user vlan number, and status of this instance.
                       zxAnDsDhcpV4IpBindingMac 1.3.6.1.4.1.3902.1082.70.40.2.1.6.1.1 macaddress no-access
This object indicates the MAC address of an ipv4 dhcp client host.
                       zxAnDsDhcpV4IpBindingSVid 1.3.6.1.4.1.3902.1082.70.40.2.1.6.1.2 vlanid no-access
This object indicates the service vlan to which an ipv4 dhcp client host belongs. Vlan range is from 1 to 4094.
                       zxAnDsDhcpV4IpBindingIpAddress 1.3.6.1.4.1.3902.1082.70.40.2.1.6.1.3 ipaddress read-only
This object indicates the allocated ipv4 address of an ipv4 dhcp client host.
                       zxAnDsDhcpV4IpBindingLeasedTime 1.3.6.1.4.1.3902.1082.70.40.2.1.6.1.4 dateandtime read-only
This object indicates the leased time of this ipv4 dhcp bindings.The format is 2d-1d-1d,1d:1d:1d.1d. For example, 1992-5-26,13:30:15.0.
                       zxAnDsDhcpV4IpBindingUserVid 1.3.6.1.4.1.3902.1082.70.40.2.1.6.1.5 vlanid read-only
This object indicates the vlan to which an ipv4 dhcp client host belongs. Vlan range is from 1 to 4094.
                       zxAnDsDhcpV4IpBindingRowStatus 1.3.6.1.4.1.3902.1082.70.40.2.1.6.1.50 rowstatus read-only
This object is used to manage the deletion of rows in this table. This object only supports 'active(1)', and 'destroy(6)' value. Whenever an ipv4 dhcp binding is learnt by the interface, an entry will be created in this table with its RowStatus object set to 'active(1)'. Setting this object value to 'destroy(6)' will clear the ipv4 dhcp binding information.
               zxAnDsDhcpV4IfSessionLimitTable 1.3.6.1.4.1.3902.1082.70.40.2.1.9 no-access
This object specifies the maximum number of DHCPv4 bindings allowed on this interface. This objects value will limit the number of entries in zxAnDsDhcpV4IpBindingTable. The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) for PON card: SubIfType = ONU vport sub-interface(1) for DSL card: SubIfType = DSL PVC sub-interface(6)
                   zxAnDsDhcpV4IfSessionLimitEntry 1.3.6.1.4.1.3902.1082.70.40.2.1.9.1 no-access
A row instance contains the configuration of binding limit at each interface capable of this feature.
                       zxAnDsDhcpV4IfSessionLimit 1.3.6.1.4.1.3902.1082.70.40.2.1.9.1.1 integer32 read-write
This object specifies the maximum number of DHCPv4 bindings allowed on this interface. This objects value will limit the number of entries in zxAnDsDhcpV4IpBindingTable.when the value is 0, that means no limit in the user interface.
               zxAnDsDhcpV4IfStatsTable 1.3.6.1.4.1.3902.1082.70.40.2.1.50 no-access
This table provides the ipv4 dhcp statistics information received by by the interface capable of this feature. The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) for PON card: SubIfType = ONU vport sub-interface(2) for DSL card: SubIfType = DSL PVC sub-interface(6)
                     zxAnDsDhcpV4IfStatsEntry 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1 no-access
A row instance contains the interface number, ipv4 dhcp packet information and reset ipv4 dhcp packet statistics.
                         zxAnDsDhcpV4IfStatsDiscoverPkts 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.1 counter32 read-only
This object indicates the discover number of packets subjected to ipv4 dhcp snooping is received.
                         zxAnDsDhcpV4IfStatsOfferPkts 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.2 counter32 read-only
This object indicates the offer number of packets subjected to ipv4 dhcp snooping is received.
                         zxAnDsDhcpV4IfStatsRequestPkts 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.3 counter32 read-only
This object indicates the request number of packets subjected to ipv4 dhcp snooping is received.
                         zxAnDsDhcpV4IfStatsAckPkts 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.4 counter32 read-only
This object indicates the ack number of packets subjected to ipv4 dhcp snooping is received.
                         zxAnDsDhcpV4IfStatsNackPkts 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.5 counter32 read-only
This object indicates the nack number of packets subjected to ipv4 dhcp snooping is received.
                         zxAnDsDhcpV4IfStatsReleasePkts 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.6 counter32 read-only
This object indicates the release number of packets subjected to ipv4 dhcp snooping is received.
                         zxAnDsDhcpV4IfStatsDeclinePkts 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.7 counter32 read-only
This object indicates the decline number of packets subjected to ipv4 dhcp snooping is received.
                         zxAnDsDhcpV4IfStatsInformPkts 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.8 counter32 read-only
This object indicates the inform number of packets subjected to ipv4 dhcp snooping is received.
                         zxAnDsDhcpV4IfStatsReset 1.3.6.1.4.1.3902.1082.70.40.2.1.50.1.100 integer read-write
This object indicates whether ipv4 dhcp statistics is cleared at this interface. If this object is set to 'reset(1)', ipv4 dhcp statistics at this interface will be cleared. Enumeration: 'reset': 1.
           zxAnDsDhcpV6Objects 1.3.6.1.4.1.3902.1082.70.40.2.2
               zxAnDsDhcpV6GlobalObjects 1.3.6.1.4.1.3902.1082.70.40.2.2.1
                   zxAnDsDhcpV6GlobalEnable 1.3.6.1.4.1.3902.1082.70.40.2.2.1.1 integer read-write
Enable or disable DHCPv6 snooping. Enumeration: 'disabled': 2, 'enabled': 1.
                   zxAnDsDhcpV6OnlineUsers 1.3.6.1.4.1.3902.1082.70.40.2.2.1.3 integer32 read-only
The total number of DHCPv6 snooping online users.
               zxAnDsDhcpV6VlanTable 1.3.6.1.4.1.3902.1082.70.40.2.2.2 no-access
This table provides the mechanism to control ipv6 dhcp snooping per vlan. When a vlan is created in a device supporting this table, a corresponding entry of this table will be added. When a vlan is destroyed in a device supporting this table, a corresponding entry of this table will be deleted.
                   zxAnDsDhcpV6VlanEntry 1.3.6.1.4.1.3902.1082.70.40.2.2.2.1 no-access
A row instance contains the configuration to create or destroy ipv6 dhcp snooping at each existing vlan.
                       zxAnDsDhcpV6Vid 1.3.6.1.4.1.3902.1082.70.40.2.2.2.1.1 vlanid no-access
This object indicates the vlan number on which ipv6 dhcp snooping feature is configured.
                       zxAnDsDhcpV6VlanRowStatus 1.3.6.1.4.1.3902.1082.70.40.2.2.2.1.2 rowstatus read-only
This object is used to manage the creation and deletion of rows in this table. It only supports 'active(1)' ,'createAndGo(4)'and 'destroy(6)' value. If this object is set to 'createAndGo(4)', the vlan number on which ipv6 dhcp snooping is active(1). Setting this object value to destroy(6),the vlan number on which ipv6 dhcp snooping is deleted.
               zxAnDsDhcpV6IpBindingTable 1.3.6.1.4.1.3902.1082.70.40.2.2.6 no-access
This table provides the ipv6 dhcp snooping bindings information learnt by the interface capable of this feature. The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) for PON card: SubIfType = ONU service port sub-interface(3) for DSL card: SubIfType = DSL PVC sub-interface(6)
                   zxAnDsDhcpV6IpBindingEntry 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1 no-access
A row instance contains the interface number, Mac address, service vlan number, IP address, IP address prefixlen,leased time, user vlan number, and status of this instance.
                       zxAnDsDhcpV6IpBindingMac 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.1 macaddress no-access
This object indicates the MAC address of an ipv6 dhcp client host.
                       zxAnDsDhcpV6IpBindingSVid 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.2 vlanid no-access
This object indicates the service vlan to which an ipv6 dhcp client host belongs. Vlan range is from 1 to 4094.
                       zxAnDsDhcpV6IpBindingIpAddress 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.3 inetaddress no-access
This object indicates the allocated ipv6 address of an ipv6 dhcp client host.
                       zxAnDsDhcpV6IpBindingIpPfxLen 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.4 inetaddressprefixlength read-only
This object indicates the allocated ipv6 address pfxlen of an ipv6 dhcp client host.
                       zxAnDsDhcpV6IpBindingLeasedTime 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.5 dateandtime read-only
This object indicates the leased time of this ipv6 dhcp bindings.The format is 2d-1d-1d,1d:1d:1d.1d. For example, 1992-5-26,13:30:15.0.
                       zxAnDsDhcpV6IpBindingUserVid 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.6 vlanid read-only
This object indicates the vlan to which an ipv6 dhcp client host belongs. Vlan range is from 1 to 4094..
                       zxAnDsDhcpV6IpBindingDuid 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.7 displaystring read-only
This object indicates the DUID(DHCP Unique Identifier) of this DHCPv6 IP binding.
                       zxAnDsDhcpV6IpBindingIaid 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.8 unsigned32 read-only
This object indicates the IAID(Identity Association) of this DHCPv6 IP binding.
                       zxAnDsDhcpV6IpBindingIaType 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.9 integer read-only
This object indicates the type of IA(Identity Association) of this DHCPv6 IP binding. Enumeration: 'iaPd': 25, 'iaTa': 4, 'iaNa': 3.
                       zxAnDsDhcpV6IpBindingRowStatus 1.3.6.1.4.1.3902.1082.70.40.2.2.6.1.50 rowstatus read-only
This object is used to manage the deletion of rows in this table. This object only supports 'active(1)', and 'destroy(6)' value. Whenever an ipv6 dhcp binding is learnt by the interface, an entry will be created in this table with its RowStatus object set to 'active(1)'. Setting this object value to 'destroy(6)' will clear the ipv6 dhcp binding information.
               zxAnDsDhcpV6IfSessionLimitTable 1.3.6.1.4.1.3902.1082.70.40.2.2.9 no-access
This object specifies the maximum number of DHCPv6 bindings allowed on this interface. This objects value will limit the number of entries in zxAnDsDhcpV6IpBindingTable The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) SubIfType = ONU vport sub-interface(1)
                   zxAnDsDhcpV6IfSessionLimitEntry 1.3.6.1.4.1.3902.1082.70.40.2.2.9.1 no-access
A row instance contains the configuration of binding limit at each interface capable of this feature.
                       zxAnDsDhcpV6IfSessionLimit 1.3.6.1.4.1.3902.1082.70.40.2.2.9.1.1 integer32 read-write
This object specifies the maximum number of DHCPv6 bindings allowed on this interface. This objects value will limit the number of entries in zxAnDsDhcpV6IpBindingTable.when the value is 0, that means no limit in the user interface.
               zxAnDsDhcpV6IfStatsTable 1.3.6.1.4.1.3902.1082.70.40.2.2.50 no-access
This table provides the ipv6 dhcp statistics information received by by the interface capable of this feature. The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) for PON card: SubIfType = ONU vport sub-interface(2) for DSL card: SubIfType = DSL PVC sub-interface(6)
                     zxAnDsDhcpV6IfStatsEntry 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1 no-access
A row instance contains the interface number, ipv6 dhcp packet information and reset ipv6 dhcp packet statistics.
                         zxAnDsDhcpV6IfStatsSolicitPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.1 counter32 read-only
This object indicates the solicit number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsAdvertisePkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.2 counter32 read-only
This object indicates the advertise number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsRequestPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.3 counter32 read-only
This object indicates the request number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsConfirmPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.4 counter32 read-only
This object indicates the confirm number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsRenewPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.5 counter32 read-only
This object indicates the renew number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsRebindPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.6 counter32 read-only
This object indicates the rebind number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsReplyPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.7 counter32 read-only
This object indicates the reply number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsReleasePkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.8 counter32 read-only
This object indicates the release number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsDeclinePkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.9 counter32 read-only
This object indicates the decline number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsReconfigPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.10 counter32 read-only
This object indicates the reconfigure number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsInformPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.11 counter32 read-only
This object indicates the Information-request number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsRelayFwdPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.12 counter32 read-only
This object indicates the relay-forward number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsRelayRlyPkts 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.13 counter32 read-only
This object indicates the relay-reply number of packets subjected to ipv6 dhcp snooping is received.
                         zxAnDsDhcpV6IfStatsReset 1.3.6.1.4.1.3902.1082.70.40.2.2.50.1.100 integer read-write
This object indicates whether ipv6 dhcp statistics is cleared at this interface. If this object is set to 'reset(1)', ipv6 dhcp statistics at this interface will be cleared. Enumeration: 'reset': 1.
           zxAnIpSrcGuardObjects 1.3.6.1.4.1.3902.1082.70.40.2.3
               zxAnIpSrcGuardGlobalObjects 1.3.6.1.4.1.3902.1082.70.40.2.3.1
                   zxAnIpsgIpSpoofingGlobalObjects 1.3.6.1.4.1.3902.1082.70.40.2.3.1.1
                       zxAnIpsgIpSpoofTrapRptInterval 1.3.6.1.4.1.3902.1082.70.40.2.3.1.1.6 integer32 read-write
The interval that the same IP spoofing trap report.
                       zxAnIpsgIpSpoofingBlockIfEnable 1.3.6.1.4.1.3902.1082.70.40.2.3.1.1.7 integer read-write
Enable or disable IP source guard blocking port function. Enumeration: 'disabled': 2, 'enabled': 1.
                       zxAnIpsgIpSpoofingBlockDuration 1.3.6.1.4.1.3902.1082.70.40.2.3.1.1.8 integer32 read-write
Indicates the port blocked duration.
                       zxAnIpsgIpSpoofingTrapEnable 1.3.6.1.4.1.3902.1082.70.40.2.3.1.1.9 integer read-write
Enable or disable zxAnIpsgIpSpoofingTrap. Enumeration: 'disabled': 2, 'enabled': 1.
                   zxAnIpSrcGuardEnable 1.3.6.1.4.1.3902.1082.70.40.2.3.1.21 integer read-write
Enable/disable IP source guard. Enumeration: 'disabled': 2, 'enabled': 1.
                   zxAnIpSrcGuardBindType 1.3.6.1.4.1.3902.1082.70.40.2.3.1.22 integer read-write
IP source guard binding type. ip(1) - IP source guard bind IP address only. ipAndMac(2) - IP source guard bind both IP address and MAC address. Enumeration: 'ip': 1, 'ipAndMac': 2.
               zxAnIpSrcGuardIfTable 1.3.6.1.4.1.3902.1082.70.40.2.3.2 no-access
This table provides the mechanism to enable or disable IP Source Guard at each user port capable of this feature. When DHCP Snooping is enabled at an interface, a list of IP addresses is obtained through DHCP Snooping for this particular interface. another list of IP addresses is obtained through static configuration. If IP Source Guard at this interface and the VLAN number on which IP Source Guard at this interface is enabled, only traffic from these IP addresses is allowed to pass through the interface. The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) for PON card: SubIfType = ONU service port sub-interface(3) for DSL card: SubIfType = DSL PVC sub-interface(6)
                   zxAnIpSrcGuardIfEntry 1.3.6.1.4.1.3902.1082.70.40.2.3.2.1 no-access
A row instance contains the configuration to enable or disable IP Source Guard at each user interface capable of this feature.
                       zxAnIpSrcGuardIfEnable 1.3.6.1.4.1.3902.1082.70.40.2.3.2.1.1 truthvalue read-write
This object indicates whether IP Source Guard is enabled at this interface.If this object is set to 'true', IP Source Guard at this interface is enabled. If IP Source Guard at this interface and the VLAN number on which IP Source Guard at this interface are both enabled, Traffic coming to this interface will be forwarded if it is from the list of IP addresses obtained through DHCP Snooping or static configuration. Otherwise, it is denied. If this object is set to 'false', IP Source Guard at this interface is disabled. 1-true,2-false.
               zxAnIpv4SrcGuardObjects 1.3.6.1.4.1.3902.1082.70.40.2.3.20
                     zxAnIpv4SrcGuardIpBindingTable 1.3.6.1.4.1.3902.1082.70.40.2.3.20.2 no-access
This table provides the information on static IPv4 addresses used for IP source guard purpose at each interface capable of this feature. The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) for PON card: SubIfType = ONU service port sub-interface(3) for DSL card: SubIfType = DSL PVC sub-interface(6)
                         zxAnIpv4SrcGuardIpBindingEntry 1.3.6.1.4.1.3902.1082.70.40.2.3.20.2.1 no-access
An entry of zxAnIpv4SrcGuardIpBindingTable.
                             zxAnIpv4SrcGuardIpBindIpAddress 1.3.6.1.4.1.3902.1082.70.40.2.3.20.2.1.1 ipaddress no-access
IP address.
                             zxAnIpv4SrcGuardIpBindMac 1.3.6.1.4.1.3902.1082.70.40.2.3.20.2.1.2 macaddress read-only
MAC address. FF-FF-FF-FF-FF-FF means N/A.
                             zxAnIpv4SrcGuardIpBindType 1.3.6.1.4.1.3902.1082.70.40.2.3.20.2.1.3 integer read-only
IP address binding type. If zxAnIpv4SrcGuardIpBindType is static(1), this item can't be inactive. Enumeration: 'dynamic': 2, 'static': 1.
                             zxAnIpv4SrcGuardIpBindIpMask 1.3.6.1.4.1.3902.1082.70.40.2.3.20.2.1.4 ipaddress read-only
IP mask.
                             zxAnIpv4SrcGuardIpBindRowStatus 1.3.6.1.4.1.3902.1082.70.40.2.3.20.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnIpv4SrcGuardIpBindingEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
               zxAnIpv6SrcGuardObjects 1.3.6.1.4.1.3902.1082.70.40.2.3.21
                     zxAnIpv6SrcGuardIpBindingTable 1.3.6.1.4.1.3902.1082.70.40.2.3.21.2 no-access
This table provides the information on IPv6 addresses used for IP source guard purpose at each interface capable of this feature. The interfaces for which this feature must be applicable are: IfType = Physical Interface(1) for PON card: SubIfType = ONU service port sub-interface(3) for DSL card: SubIfType = DSL PVC sub-interface(6)
                         zxAnIpv6SrcGuardIpBindingEntry 1.3.6.1.4.1.3902.1082.70.40.2.3.21.2.1 no-access
An entry of zxAnIpv6SrcGuardIpBindingTable.
                             zxAnIpv6SrcGuardIpBindIpType 1.3.6.1.4.1.3902.1082.70.40.2.3.21.2.1.1 inetaddresstype no-access
IP adress type.
                             zxAnIpv6SrcGuardIpBindIpAddress 1.3.6.1.4.1.3902.1082.70.40.2.3.21.2.1.2 inetaddressipv6 no-access
IP adress.
                             zxAnIpv6SrcGuardIpBindPfxLen 1.3.6.1.4.1.3902.1082.70.40.2.3.21.2.1.3 inetaddressprefixlength read-only
IP address prefix length.
                             zxAnIpv6SrcGuardIpBindMac 1.3.6.1.4.1.3902.1082.70.40.2.3.21.2.1.4 macaddress read-only
MAC address.
                             zxAnIpv6SrcGuardIpBindType 1.3.6.1.4.1.3902.1082.70.40.2.3.21.2.1.5 integer read-only
IP address binding type. If zxAnIpv6SrcGuardBindType is static(1), this item can't be inactive. Enumeration: 'dynamic': 2, 'static': 1, 'ndUser': 3.
                             zxAnIpv6SrcGuardIpBindRowStatus 1.3.6.1.4.1.3902.1082.70.40.2.3.21.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnIpv6SrcGuardIpBindingEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
       zxAnDhcpSnoopingNotifications 1.3.6.1.4.1.3902.1082.70.40.3
           zxAnIpSrcGuardTraps 1.3.6.1.4.1.3902.1082.70.40.3.1
               zxAnIpsgIpSpoofingTrap 1.3.6.1.4.1.3902.1082.70.40.3.1.1
This notification means the agent has detected that the IP spoofing occurs.
               zxAnIpsgIpSpoofingIfBlockedAlm 1.3.6.1.4.1.3902.1082.70.40.3.1.2
It indicate that the user port was blocked when IP spoofing occured.
               zxAnIpsgIpSpoofingIfBlockedClr 1.3.6.1.4.1.3902.1082.70.40.3.1.3
It indicate that the user port was unblocked after a setting interval.
       zxAnDhcpSnoopingConformance 1.3.6.1.4.1.3902.1082.70.40.4
           zxAnDhcpSnoopingCompliances 1.3.6.1.4.1.3902.1082.70.40.4.1
               zxAnDsDhcpV4Compliances 1.3.6.1.4.1.3902.1082.70.40.4.1.1
The compliance statement for implementing IPV4 dhcp snooping MIB.
               zxAnDsDhcpV6Compliances 1.3.6.1.4.1.3902.1082.70.40.4.1.2
The compliance statement for implementing IPV6 dhcp snooping MIB.
               zxAnIpSrcGuardCompliances 1.3.6.1.4.1.3902.1082.70.40.4.1.3
The compliance statement for implementing IP source guard MIB.
           zxAnDhcpSnoopingGroups 1.3.6.1.4.1.3902.1082.70.40.4.2
               zxAnDsDhcpV4VlanGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.1
The object is used to configure as well as show information regarding the ipv4 dhcp snooping feature per VLAN.
               zxAnDsDhcpV4IpBindingGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.2
A collection of objects which are used to delete as well as show information regarding the ipv4 dhcp bindings data.
               zxAnDsDhcpV4IfSessionLimitGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.6
The object is used to configure as well as show information regarding the ipv4 dhcp session limit data.
               zxAnDsDhcpV4IfStatsGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.7
A collection of objects which are used to reset as well ad show additional ipv4 dhcp snooping statistics information.
               zxAnDsDhcpV6VlanGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.30
The object is used to configure as well as show information regarding the ipv6 dhcp snooping feature per VLAN.
               zxAnDsDhcpV6IpBindingGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.31
A collection of objects which are used to delete as well as show information regarding the ipv6 dhcp bindings data.
               zxAnDsDhcpV6IfSessionLimitGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.34
The object is used to configure as well as show information regarding the ipv6 dhcp session limit data.
               zxAnDsDhcpV6IfStatsGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.35
A collection of objects which are used to reset as well ad show additional ipv6 dhcp snooping statistics information.
               zxAnIpSrcGuardIfGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.36
The object is used to configure as well as show information regarding the IP source guard feature per user interface.
               zxAnIpv4SrcGuardBindingGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.38
A collection of objects which are used to configure as well as show information regarding the ipv4 source guard bindings data.
               zxAnIpv6SrcGuardBindingGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.39
A collection of objects which are used to configure as well as show information regarding the ipv6 source guard bindings data.
               zxAnIpSrcGuardTrapGroup 1.3.6.1.4.1.3902.1082.70.40.4.2.40
The object is used to indicate the IP spoofing notification.