ZHONE-GEN-WTN-MONITOR-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONE TECHNOLOGIES


 Home MIB: ZHONE-GEN-WTN-MONITOR-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, Zhone, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     wtnMonitor 1.3.6.1.4.1.5504.3.9.1
Collection of monitored elements for each wireless transport node.
         wtnLedStatus 1.3.6.1.4.1.5504.3.9.1.1 bits read-only
Reflects current state of LEDs of indoor unit. A bit value of 1 indicates the LED is ON. A bit value of 0 indicates the LED of OFF. Meaning of LEDs: =========================================== diag - Upon power up the LED is turned on. If the unit successfully passes diagnostics, the LED is turned off. When operational, the LED is turned on when diagnostics are performed or when the system detects an alarm. operational - Upon power up the LED is off. When the system is operating it is turned on. The actual LED is blinked when the ZMS link is down or during software download. lineInterface - This LED is turned on when there are no wire-line alarms. For SkyZhone45 - this refers to the DS3 line. For SkyZhone155 - this refers to the fiber. For SkyZhone8e - this refers to the set of T1/E1 lines. radio - This LED is turned on when there are no radio receive alarms. local- This LED is turned on when there are not alarms present on the Near End indoor or outdoor units. remote - This LED is turned on when there are not alarms present on the Far End indoor or outdoor units. Bits: 'remote': 5, 'diag': 0, 'operational': 1, 'radio': 3, 'lineInterface': 2, 'local': 4.
         wtnAlarmStatus 1.3.6.1.4.1.5504.3.9.1.2 bits read-only
Alarm Contact Status. minorAlarm(0) - when active, a minor alarm condition is present criticalAlarm(1) - when active, a critical alarm condition is present. On power up all alarms contacts are open/inactive (0). Bits: 'minorAlarm': 0, 'criticalAlarm': 1.
     radioLinkConfiguration 1.3.6.1.4.1.5504.3.9.2
Description.
         wtnLinkName 1.3.6.1.4.1.5504.3.9.2.1 snmpadminstring read-write
Textual description which identifies link. A link is comprised of this and another SkyZhone node at the far end.
 zhoneGenWtnMonitorModule 1.3.6.1.4.1.5504.6.102
Module for wireless transport node (ZWT) variables which report general system status.