ZHONE-COM-VOICE-SIG-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONE TECHNOLOGIES


 Home MIB: ZHONE-COM-VOICE-SIG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Zhone

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zhoneVoiceSignalingMib 1.3.6.1.4.1.5504.4.3.7
The Zhone Voice Signaling MIB defines Zhone Voice Signaling specfic information. This MIB contains system side voice specific info, like the hookflash timers. User will not create this profile, but when system comes up, it checks to see if the scalar info exists. If not, it creates one with default values.
     zhoneVoiceSignalingTimers 1.3.6.1.4.1.5504.4.3.7.1
This is a place holder to contain all the system wide voice specific timers. 'hookFlashTimerMin' field is read/write field so a user can set this field to a particular value. It specifies the minimum timer for hookflash. 'hookFlashTimerMax' field is a read/write field to a user can set this field to a particular value. It specifies the maximum timer for hookflash.
         hookFlashTimerMin 1.3.6.1.4.1.5504.4.3.7.1.1 integer32 read-write
The Hookflash specifies the minimum timer that qualifies for a hookflash. Any loopopen below this time will be ignored as a glitch.
         hookFlashTimerMax 1.3.6.1.4.1.5504.4.3.7.1.2 integer32 read-write
The Hookflash specifies the maximum timer that qualifies for a hookflash. Any loopopen more than this timer will be considered as a onhook.
         sysPartialDialTo 1.3.6.1.4.1.5504.4.3.7.1.3 unsigned32 read-write
This object contains the maximum value of the partial dial time out.
         sysCriticalDialTo 1.3.6.1.4.1.5504.4.3.7.1.4 unsigned32 read-write
This object contains the maximum value of the critical \ dial time out.
         sysBusyToneTo 1.3.6.1.4.1.5504.4.3.7.1.5 unsigned32 read-write
This object contains the default timeout value for busy tone.
         sysDialToneTo 1.3.6.1.4.1.5504.4.3.7.1.6 unsigned32 read-write
This object contains the default timeout value for dial tone.
         sysMsgWaitToneTo 1.3.6.1.4.1.5504.4.3.7.1.7 unsigned32 read-write
This object contains the default timeout value for message wait tone.
         sysOffhookWarnToneTo 1.3.6.1.4.1.5504.4.3.7.1.8 unsigned32 read-write
This object contains the default timeout value for offhook warn tone.
         sysRingingTo 1.3.6.1.4.1.5504.4.3.7.1.9 unsigned32 read-write
This object contains the default timeout value for ringing.
         sysRingbackTo 1.3.6.1.4.1.5504.4.3.7.1.10 unsigned32 read-write
This object contains the default timeout value for ringback tone.
         sysReorderToneTo 1.3.6.1.4.1.5504.4.3.7.1.11 unsigned32 read-write
This object contains the default timeout value for reorder tone.
         sysStutterToneTo 1.3.6.1.4.1.5504.4.3.7.1.12 unsigned32 read-write
This object contains the default timeout value for stutter tone.
         sysServerMaxTimer 1.3.6.1.4.1.5504.4.3.7.1.13 unsigned32 read-write
This object is used as part of a retransmission algorithm when communicating with a call agent. This object contains the maximum time in seconds since the sending of the initial datagram to a call agent. If more than pktcNcsEndPntConfigTSMax time has elapsed, the endpoint becomes disconnected.
         sysConfigMax1 1.3.6.1.4.1.5504.4.3.7.1.14 unsigned32 read-write
This object contains the suspicious error threshold for signaling messages. The configMax1 object indicates the retransmission threshold at which the gateway MAY actively query the domain name server (DNS) in order to detect the possible change of call agent interfaces.
         sysConfigMax2 1.3.6.1.4.1.5504.4.3.7.1.15 unsigned32 read-write
This object contains the disconnect error threshold for signaling messages. The configMax2 object indicates the retransmission threshold at which the gateway SHOULD contact the DNS one more time to see if any other interfaces to the call agent have become available.
         sysMax1Enable 1.3.6.1.4.1.5504.4.3.7.1.16 truthvalue read-write
This object enables/disables the Max1 domain name server (DNS) query operation when the configMax1 threshold has been reached.
         sysMax2Enable 1.3.6.1.4.1.5504.4.3.7.1.17 truthvalue read-write
This object enables/disables the Max2 domain name server (DNS) query operation when the configMax2 threshold has been reached.
         sysMaxWaitingDelay 1.3.6.1.4.1.5504.4.3.7.1.18 unsigned32 read-write
Maximum Waiting Delay (MWD) contains the maximum number of seconds a Gateway waits after powering on, before initiating the restart procedure with the call agent.
         sysDisconnectWaitTimer 1.3.6.1.4.1.5504.4.3.7.1.19 unsigned32 read-write
This object contains the initial number of seconds the gateway waits after a disconnect, before initiating the disconnected procedure with the call agent.
         sysDisconnectMinTimer 1.3.6.1.4.1.5504.4.3.7.1.20 unsigned32 read-write
This object contains the minimum number of seconds the gatway waits after a disconnect, before initiating the disconnected procedure with the call agent.
         sysDisconnectMaxTimer 1.3.6.1.4.1.5504.4.3.7.1.21 unsigned32 read-write
This object contains the maximum number of seconds the gatway waits after a disconnect, before initiating the disconnected procedure with the call agent.
         sysMaxRetransmitTimer 1.3.6.1.4.1.5504.4.3.7.1.22 unsigned32 read-write
This object contains the maximum number of seconds for the retransmission timer. When this timer expires the gateway retransmits the message.
         sysInitRetransmitTimer 1.3.6.1.4.1.5504.4.3.7.1.23 unsigned32 read-write
This object contains the initial number of seconds for the retransmission timer.
         sysKeepAliveTimer 1.3.6.1.4.1.5504.4.3.7.1.24 unsigned32 read-write
Specifies a timeout value in minutes for sending long duration call notification message.
         sysNoResponseTimer 1.3.6.1.4.1.5504.4.3.7.1.25 unsigned32 read-write
Timeout period in seconds before no response is declared.
         sysCallWaitMaxRepeat 1.3.6.1.4.1.5504.4.3.7.1.26 unsigned32 read-write
This object contains the default value of the maximum number of repetitions of the call waiting tone that the gateway will play.
         sysCallWaitDelay 1.3.6.1.4.1.5504.4.3.7.1.27 unsigned32 read-write
This object contains the delay between repetitions of the call waiting tone that the gateway will play.
         sysPulseInterDigitTimer 1.3.6.1.4.1.5504.4.3.7.1.28 unsigned32 read-write
This is the pulse dial inter-digit timeout.
         sysMinMakePulseWidth 1.3.6.1.4.1.5504.4.3.7.1.29 unsigned32 read-write
This is the minimum make pulse width for the dial pulse.
         sysMaxMakePulseWidth 1.3.6.1.4.1.5504.4.3.7.1.30 unsigned32 read-write
This is the maximum make pulse width for the dial pulse.
         sysMinBreakPulseWidth 1.3.6.1.4.1.5504.4.3.7.1.31 unsigned32 read-write
This is the minimum break pulse width for the dial pulse.
         sysMaxBreakPulseWidth 1.3.6.1.4.1.5504.4.3.7.1.32 unsigned32 read-write
This is the maximum break pulse width for the dial pulse.
         zhoneVoiceSignalingObjectsGroup 1.3.6.1.4.1.5504.4.3.7.1.33
Description.