ZHONE-COM-IP-STATIC-ROUTE-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONE TECHNOLOGIES


 Home MIB: ZHONE-COM-IP-STATIC-ROUTE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Zhone, Zhone-TC, ZHONE-COM-IP-RD-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     staticRoute 1.3.6.1.4.1.5504.4.1.13
The MIB module representing static routes in Zhone Technologies products. Static routes are user-defined routes that cause packets moving between a source and a destination to take a specified path. Static routes can be important if a router cannot build a route to a particular destination. They are also useful for specifying a gateway of last resort to which all unroutable packets will be sent.
           staticRouteTable 1.3.6.1.4.1.5504.4.1.13.1 no-access
The Static Routes table contains static routes assigned to all interfaces. Each interface automatically gets one or more static routes upon interface initialization. More static routes are added as needed (e.g. default gateway). Rows are added by assigning staticRouteDest, staticRouteNetMask, staticRouteNextHop (or staticRouteIfNumber), and setting staticRouteRowStatus to 'createAndGo'. Rows are removed by setting staticRouteRowStatus to 'destroy'.
               staticRouteEntry 1.3.6.1.4.1.5504.4.1.13.1.1 no-access
An entry in the Static Route table.
                   staticRouteDest 1.3.6.1.4.1.5504.4.1.13.1.1.1 ipaddress no-access
The destination network or host IP address of the static route. A default gateway is one with a destination of 0.0.0.0 and netmask 0.0.0.0.
                   staticRouteNetMask 1.3.6.1.4.1.5504.4.1.13.1.1.2 ipaddress no-access
The destination IP network mask of the static route. A default gateway is one with a destination of 0.0.0.0 and netmask 0.0.0.0.
                   staticRouteNextHop 1.3.6.1.4.1.5504.4.1.13.1.1.3 ipaddress no-access
The IP address of the nexthop router of the static route. This may be 0.0.0.0 for static routes that use an interface number rather than a nexthop address, as in the case of a destination directly reachable via an interface requiring no intermediary system to act as a gateway.
                   staticRouteIfNumber 1.3.6.1.4.1.5504.4.1.13.1.1.4 interfaceindexorzero no-access
The interface of the static route. This is for directly connected destinations (i.e. use this instead of staticRouteNextHop). Unnumbered point-to-point interfaces require this value to be valid. In general, this value must be valid if staticRouteNextHop is not valid. If staticRouteNextHop is valid, then this value must represent the interface named by the nexthop address. This index comes from ifIndex of RFC2233.
                   staticRouteMetric 1.3.6.1.4.1.5504.4.1.13.1.1.5 unsigned32 read-only
A dimensionless quantity chosen at the discretion of the provisioner for the purpose of comparing static routes. The meaning of this value when static routes are redistributed to other protocols is protocol-dependent, and the resulting value after redistribution is determined by the route-maps in use for that protocol. Lower numeric values for this number indicate more preferred routes.
                   staticRouteEnable 1.3.6.1.4.1.5504.4.1.13.1.1.6 integer read-only
An enumeration of the administrative state of the static route. The possible values are either 'disabled' or 'enabled', where the static route entry is not considered when making forwarding decisions for 'disabled', and is so for 'enabled'. The default is 'enabled'. Enumeration: 'disabled': 1, 'enabled': 2.
                   staticRouteRowStatus 1.3.6.1.4.1.5504.4.1.13.1.1.7 zhonerowstatus read-only
The status of a static route entry.
                   staticRouteType 1.3.6.1.4.1.5504.4.1.13.1.1.8 integer no-access
Determines if this entry is a traditional destination route or a source address based route. Enumeration: 'sourceRoute': 2, 'destinationRoute': 1.
                   staticRouteFallbackMetric 1.3.6.1.4.1.5504.4.1.13.1.1.9 integer32 read-only
This object contains the fallback metric value for routes that are a part of a fallback route pair. Please refer to the Zhone Technologies User's Reference Manual for more information about fallback route pairs. The value of this object must be greater than both of the staticRouteMetrics of fallback route pair.
                   staticRoutePingInterval 1.3.6.1.4.1.5504.4.1.13.1.1.10 unsigned32 read-only
This object defines the interval, in milliseconds, of succesive pings of the nexthop of an active fallback route pair. The minimum value is 500 milliseconds, and must be specified in increments of 100 milliseconds.
                   staticRoutePingFailMax 1.3.6.1.4.1.5504.4.1.13.1.1.11 integer32 read-only
This object contain the maximum number of times that the ping of the nexthop of an active route in a fallback route pair must fail, in a row, before this route is demoted to fallback and the other route in the fallback pair becomes the active route.
 comIpStaticRoute 1.3.6.1.4.1.5504.6.63
IP Static Route MIB IP Software Minneapolis, MN