XEDIA-ISDN-MIB: View SNMP OID List / Download MIB

VENDOR: XEDIA CORPORATION


 Home MIB: XEDIA-ISDN-MIB
Download as:   
SNMPv2-CONF, ISDN-MIB, SNMPv2-SMI, XEDIA-REG, DIAL-CONTROL-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 xediaIsdnMIB 1.3.6.1.4.1.838.3.37
This module defines additional objects for management of ISDN in Xedia devices, above and beyond what is defined in the standard rfc2127, and proposed drafts.
       xisdnObjects 1.3.6.1.4.1.838.3.37.1
           xisdnTable 1.3.6.1.4.1.838.3.37.1.1 no-access
A stupid SNMP construct.
               xisdnEntry 1.3.6.1.4.1.838.3.37.1.1.1 no-access
An entry containing additional management information applicable to an ISDN interface.
                   xisdnLoopbackState 1.3.6.1.4.1.838.3.37.1.1.1.1 integer read-write
loopback status Enumeration: 'disabled': 1, 'enabled': 2.
           xdialCtlPeerCfgTable 1.3.6.1.4.1.838.3.37.1.2 no-access
A stupid SNMP construct.
               xdialCtlPeerCfgEntry 1.3.6.1.4.1.838.3.37.1.2.1 no-access
An entry containing additional management information applicable to an ISDN interface.
                   xcallControl 1.3.6.1.4.1.838.3.37.1.2.1.1 integer read-write
force outbound call Enumeration: 'disconnect': 3, 'noOp': 1, 'connect': 2.
                   xnailedUp 1.3.6.1.4.1.838.3.37.1.2.1.2 integer read-write
permanant (non-signalling) B channel connection Enumeration: 'none': 1, 'b1': 2, 'b2': 3.
           xisdnVersion 1.3.6.1.4.1.838.3.37.1.3 displaystring read-only
the ISDN subsystem software version number
           xisdnSignalingTable 1.3.6.1.4.1.838.3.37.1.4 no-access
ISDN signaling table containing configuration and operational parameters for all ISDN signaling channels on this managed device.
               xisdnSignalingEntry 1.3.6.1.4.1.838.3.37.1.4.1 no-access
An entry in the ISDN Signaling Table. To create a new entry, only isdnSignalingProtocol needs to be specified before isdnSignalingStatus can become active(1).
                   isdnSignalingCallingAddress2 1.3.6.1.4.1.838.3.37.1.4.1.1 displaystring read-only
The ISDN Address to be assigned to the second B channel. Obviously not the right way to do this.
                   isdnEndpointSpid 1.3.6.1.4.1.838.3.37.1.4.1.2 displaystring read-only
The Service profile IDentifier (SPID) information for this Terminal Endpoint. The SPID is composed of 9-20 numeric characters. This information has to be defined in addition to the local number for some switch protocol types, e.g. Bellcore NI-1 and NI-2. If this object is not required, it is a zero length string.
                   isdnEndpointSpid2 1.3.6.1.4.1.838.3.37.1.4.1.3 displaystring read-only
The Service profile IDentifier (SPID) information for this Terminal Endpoint. The SPID is composed of 9-20 numeric characters. This information has to be defined in addition to the local number for some switch protocol types, e.g. Bellcore NI-1 and NI-2. If this object is not required, it is a zero length string.
       xisdnConformance 1.3.6.1.4.1.838.3.37.2
           xisdnCompliances 1.3.6.1.4.1.838.3.37.2.1
               xisdnCompliance 1.3.6.1.4.1.838.3.37.2.1.1
The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
           xisdnGroups 1.3.6.1.4.1.838.3.37.2.2
               xisdnAllGroup 1.3.6.1.4.1.838.3.37.2.2.1
The set of all accessible objects in this MIB.