XEDIA-IPBACKUP-MIB: View SNMP OID List / Download MIB

VENDOR: XEDIA CORPORATION

Home	MIB: XEDIA-IPBACKUP-MIB
Download as:		SNMPv2-CONF, IF-MIB, SNMPv2-SMI, XEDIA-REG, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
xediaIpBackupMIB	1.3.6.1.4.1.838.3.15			This module defines additional objects for management of IP Backup in Xedia devices, above and beyond what is defined in the for the VRRP (or other implemented backup procedures).
xipbackupObjects	1.3.6.1.4.1.838.3.15.1
xipbackupGeneral	1.3.6.1.4.1.838.3.15.1.1
xipbackupAdminStatus	1.3.6.1.4.1.838.3.15.1.1.1	integer	read-write	The administrative status of IP Backup for the IP router. It is the desired state of IP Backup for the router. The value 'enabled(1)' indicates that the IP Backup process should be active in the router, while 'disabled(2)' indicates that IP Backup should not be active for the router. Enumeration: 'disabled': 2, 'enabled': 1.
xipbackupBridgeAdminStatus	1.3.6.1.4.1.838.3.15.1.1.2	integer	read-write	The administrative status of IP Backup for the bridge. It is the desired state of IP Backup for the bridge. The value 'enabled(1)' indicates that the IP Backup process should be active in the router, while 'disabled(2)' indicates that IP Backup should not be active for the bridge. The bridge will not forward frames if this value is enabled unless it has achieved the master state through the IP Backup protocol. Enumeration: 'disabled': 2, 'enabled': 1.
xipbackupInstTable	1.3.6.1.4.1.838.3.15.1.2		no-access	The information associated with a backup instance. This typically augments the vrrpOperTable.
xipbackupInstEntry	1.3.6.1.4.1.838.3.15.1.2.1		no-access	An entry in the table, containing the operational characteristics of a backup instance. A given backup instance is identifed by a combination of the IF index and instance ID. This table typically augments the VRRP vrrpOperTable where vrid = instance ID.
xipbackupInstId	1.3.6.1.4.1.838.3.15.1.2.1.1	backupid	no-access	This object contains the backup instance identifier.
xipbackupInstTrackIp	1.3.6.1.4.1.838.3.15.1.2.1.2	ipaddress	read-write	An IP address to be 'tracked' by this backup instance. If this value is set, a backup instance (virtual router) cannot become Master if this interface is not up.
xipbackupInstInitializeCode	1.3.6.1.4.1.838.3.15.1.2.1.3	integer	read-only	The reason, if any, that this virtual router has not progressed past the Initialize state. If multiple reasons, are present, only one value is shown and correcting that condition or configuration will reveal the remaining reason(s). If the virtual router may enter the Master or Backup state, the value shown is 'ready'. Enumeration: 'bridgeDown': 9, 'noAddressOnSubnet': 6, 'interfaceDown': 8, 'globalDisabled': 2, 'rowStatusNotActive': 4, 'ready': 1, 'instanceDisabled': 3, 'trackedIpDown': 7, 'noAssociatedIpAddr': 5.
xipbackupConformance	1.3.6.1.4.1.838.3.15.2
xipbackupCompliances	1.3.6.1.4.1.838.3.15.2.1
xipbackupCompliance	1.3.6.1.4.1.838.3.15.2.1.1			The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
xipbackupGroups	1.3.6.1.4.1.838.3.15.2.2
xipbackupAllGroup	1.3.6.1.4.1.838.3.15.2.2.1			The set of all accessible objects in this MIB.