XEDIA-DVMRP-MIB: View SNMP OID List / Download MIB

VENDOR: XEDIA CORPORATION


 Home MIB: XEDIA-DVMRP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, XEDIA-REG

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 xdvmrpMIB 1.3.6.1.4.1.838.3.32
The Xedia extention MIB module for management of DVMRP routers.
       xdvmrpMIBObjects 1.3.6.1.4.1.838.3.32.1
           xdvmrp 1.3.6.1.4.1.838.3.32.1.1
               xdvmrpInterfaceTable 1.3.6.1.4.1.838.3.32.1.1.1 no-access
The (conceptual) table listing the router's multicast- capable interfaces.
                   xdvmrpInterfaceEntry 1.3.6.1.4.1.838.3.32.1.1.1.1 no-access
An entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
                       xdvmrpInterfaceIfIndex 1.3.6.1.4.1.838.3.32.1.1.1.1.1 integer no-access
The ifIndex value of the interface for which DVMRP is enabled.
                       xdvmrpInterfaceState 1.3.6.1.4.1.838.3.32.1.1.1.1.2 integer read-only
The current status of this DVMRP interface. Enumeration: 'down': 2, 'up': 1.
                       xdvmrpInterfaceDefaultInformation 1.3.6.1.4.1.838.3.32.1.1.1.1.3 integer read-only
Control the advertisement of default route (0.0.0.0) to the DVMRP neighbor(s) on the interface. When the value is set to disabled(1), no default route is advertised. When set to originate(2), default route is advertised along the other routes. When the value is set to only(3), only the default route is advertised through this interface. Enumeration: 'disabled': 1, 'only': 3, 'originate': 2.
                       xdvmrpInterfaceUnicastTunnel 1.3.6.1.4.1.838.3.32.1.1.1.1.4 integer read-only
Control the transmission of DVMRP messages to be unicast to the remote end point of the tunnel instead of send through the tunnel. Enabled this to interoperate with mrouted or cisco with tunnel configured in dvmrp mode. Enumeration: 'disabled': 2, 'enabled': 1.