Wellfleet-RIP6-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-RIP6-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-IPV6-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfRipv6Group 1.3.6.1.4.1.18.3.5.3.16.1.2
     wfRipv6IfTable 1.3.6.1.4.1.18.3.5.3.16.1.2.1 no-access
The list of configured RIPv6 interfaces
         wfRipv6IfEntry 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1 no-access
A description of a RIPv6 interface
             wfRipv6IntfCreate 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an RIPv6 Interface instance. Enumeration: 'deleted': 2, 'created': 1.
             wfRipv6IntfEnable 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a RIPv6 interface. Enumeration: 'disabled': 2, 'enabled': 1.
             wfRipv6IntfState 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.3 integer read-only
The current state of RIPv6 on this interface. Enumeration: 'down': 2, 'up': 1.
             wfRipv6IntfIndex 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.4 integer read-only
The index corresponding to the IPv6 interface with the same index to run RIPv6 on.
             wfRipv6IntfSupply 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.5 integer read-write
Transmit RIPv6 packets. Enumeration: 'disabled': 2, 'enabled': 1.
             wfRipv6IntfListen 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.6 integer read-write
Whether to listen to RIPv6 packets Enumeration: 'disabled': 2, 'enabled': 1.
             wfRipv6IntfDefaultRouteSupply 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.7 integer read-write
Transmit the default route, ::0, in RIPv6 packets. Enumeration: 'disabled': 2, 'generated': 3, 'enabled': 1.
             wfRipv6IntfDefaultRouteListen 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.8 integer read-write
Receive the default route, ::0, in RIPv6 packets. Enumeration: 'disabled': 2, 'enabled': 1.
             wfRipv6IntfPoisonedReversed 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.9 integer read-write
Specifies how the router advertises routes it has learned from a neighboring router in periodic updates subsequently sent to the neighbor. If 'Poisoned', the node implements poisoned reverse. The router now advertises routes learned from a neighbor in RIPv6 updates subsequently sent to that neighbor with a hop count of wfRipv6BaseDiameter plus 1, (thus declaring the destination unreachable). If 'Split', the router implements a split-horizon, and omits routes learned from a neighbor in RIPv6 updates subsequently sent to that neighbor. If 'Actual', the learned cost of the route is advertised. Enumeration: 'poisoned': 1, 'actual': 2, 'split': 3.
             wfRipv6IntfBroadcastTimer 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.10 integer read-write
This parameter allows the user to configure the frequency of full RIPv6 updates. The default is per the standard. The minimum is every 5 seconds, with a maximum of 24 hours.
             wfRipv6IntfTimeoutTimer 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.11 integer read-write
This parameter allows the user to configure the time period which RIPv6 will wait before timing out a route. This time is typically 3 x the broadcast timer. The default is 90 seconds with a maximum of 72 hours.
             wfRipv6IntfHolddownTimer 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.12 integer read-write
This parameter allows the user to configure the time period which unreachable routes will be held in the Routing Pool. This time is typically 3 x the broadcast timer. It allows RIPv6 to advertise the unreachable routes to help convergence time.
             wfRipv6IntfTriggeredUpdates 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.13 integer read-write
This parameter allows the user to configure triggered updates. By default this parameter is disabled to conform with previous release action. Enumeration: 'disabled': 2, 'enabled': 1.
             wfRipv6IntfDiameter 1.3.6.1.4.1.18.3.5.3.16.1.2.1.1.14 integer read-write
The Diameter of the RIPv6 network from wfRipv6BaseDiameter.
     wfRipv6IfStatsTable 1.3.6.1.4.1.18.3.5.3.16.1.2.2 no-access
RIPv6 interface statistics
         wfRipv6IfStatsEntry 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1 no-access
A RIPv6 interface statistics
             wfRipv6IfStatsIntfIndex 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.1 integer read-only
The Interface Index that this interface runs over
             wfRipv6IfStatsInMsgs 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.2 counter read-only
The total number of RIPv6 messages received on this interface.
             wfRipv6IfStatsInRequests 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.3 counter read-only
The number of RIPv6 Requests received on this interface.
             wfRipv6IfStatsInResponses 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.4 counter read-only
The number of RIPv6 Responses received on this interface.
             wfRipv6IfStatsInBadResponses 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.5 counter read-only
The number of RIPv6 Pkts received on this interface that were discarded.
             wfRipv6IfStatsInBadRoutes 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.6 counter read-only
The number of RIPv6 RTES received on this interface that were ignored.
             wfRipv6IfStatsOutMsgs 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.7 counter read-only
The total number of RIPv6 messages transmitted on this interface.
             wfRipv6IfStatsOutRequests 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.8 counter read-only
The number of RIPv6 Requests transmitted out this interface.
             wfRipv6IfStatsOutResponses 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.9 counter read-only
The number of RIPv6 Responses sent out this interface.
             wfRipv6IfStatsOutFullUpdates 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.10 counter read-only
The number of RIPv6 Responses sent out this interface that contain a full update of the routing table information.
             wfRipv6IfStatsOutTriggeredUpdates 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.11 counter read-only
The number of RIPv6 Responses sent out this interface that contain incremental updates of the routing table information.
             wfRipv6IfStatsOutRoutesAdvertised 1.3.6.1.4.1.18.3.5.3.16.1.2.2.1.12 counter read-only
The number of RIPv6 Routes advertised out this interface.
     wfRipv6Log 1.3.6.1.4.1.18.3.5.3.16.1.2.3
         wfRipv6LogDelete 1.3.6.1.4.1.18.3.5.3.16.1.2.3.1 integer read-write
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete wfRipv6Log mib object. Enumeration: 'deleted': 2, 'created': 1.
         wfRipv6LogDisable 1.3.6.1.4.1.18.3.5.3.16.1.2.3.2 integer read-write
Enable/Disable parameter. Default is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
         wfRipv6LogLevel 1.3.6.1.4.1.18.3.5.3.16.1.2.3.3 integer read-write
RIP6 log event level. Setting log to a specific level enables logging Ripv6 events of this level and higher. Enumeration: 'debug': 1, 'info': 3, 'warning': 4, 'trace': 2, 'fault': 5.
         wfRipv6LogEvent 1.3.6.1.4.1.18.3.5.3.16.1.2.3.4 integer read-write
Indicates whether a log message which corresponds to the value of this attributes should be sent to the log. It affects wfRipv6LogCodes only. In order to save combined list of messages you have to set wfRipv6LogCfgEvents directly as copy of wfRipv6LogEvents.
         wfRipv6LogEventDisable 1.3.6.1.4.1.18.3.5.3.16.1.2.3.5 integer read-write
Indicates whether a log event defined in wfRipv6LogEvent is to be logged. Enumeration: 'disabled': 2, 'enabled': 1.
         wfRipv6LogEvents 1.3.6.1.4.1.18.3.5.3.16.1.2.3.6 octet string read-only
Vector of enabled debug messages (to check only). Messages are identified via the string of bits contained within this attribute. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the DEBUG log message with the code (i) is enabled.
         wfRipv6LogCfgEvents 1.3.6.1.4.1.18.3.5.3.16.1.2.3.7 octet string read-write
User-defined vector of enabled debug messages upon boot. Coded as instance above
     wfRipv6Base 1.3.6.1.4.1.18.3.5.3.16.1.2.4
         wfRipv6BaseDelete 1.3.6.1.4.1.18.3.5.3.16.1.2.4.1 integer read-write
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete RIPv6. Enumeration: 'deleted': 2, 'created': 1.
         wfRipv6BaseDisable 1.3.6.1.4.1.18.3.5.3.16.1.2.4.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable RIPv6. Enumeration: 'disabled': 2, 'enabled': 1.
         wfRipv6BaseState 1.3.6.1.4.1.18.3.5.3.16.1.2.4.3 integer read-only
The current state of the entire RIPv6. Enumeration: 'down': 2, 'up': 1.
         wfRipv6BaseDiameter 1.3.6.1.4.1.18.3.5.3.16.1.2.4.4 integer read-write
The Diameter of the RIPv6 network. 1 less than 'infinity
 wfRip6AcceptTable 1.3.6.1.4.1.18.3.5.3.16.6.1 no-access
The Table of Rip6 Accept Policy Rules
     wfRip6AcceptEntry 1.3.6.1.4.1.18.3.5.3.16.6.1.1 no-access
An entry in the Rip6 Accept Rule Table
         wfRip6AcceptDelete 1.3.6.1.4.1.18.3.5.3.16.6.1.1.1 integer read-write
Create/Delete parameter. Enumeration: 'deleted': 2, 'created': 1.
         wfRip6AcceptDisable 1.3.6.1.4.1.18.3.5.3.16.6.1.1.2 integer read-write
Enable/Disable parameter. Enumeration: 'disabled': 2, 'enabled': 1.
         wfRip6AcceptIndex 1.3.6.1.4.1.18.3.5.3.16.6.1.1.3 integer read-only
Rule index number
         wfRip6AcceptName 1.3.6.1.4.1.18.3.5.3.16.6.1.1.4 displaystring read-write
Rule name - user specified name for this rule
         wfRip6AcceptPrefixes 1.3.6.1.4.1.18.3.5.3.16.6.1.1.5 octet string read-write
Prefix identification list. This identifies which prefixes will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: first octet: exact (1) or range (2) next 16 octets: prefix next octet: prefix length An entry with an 'exact' tag means to only match the specific network advertisement (prefix and length). An entry with a 'range' tag means to match any prefix that falls in the range indicated by the prefix and length. An 'exact' encoding of ::0/128 means 'match the default route. A 'range' encoding of ::0/0 means 'match any route'. A null string also means 'match any route'.
         wfRip6AcceptAction 1.3.6.1.4.1.18.3.5.3.16.6.1.1.6 integer read-write
action. 'accept' means that the route should be considered for inclusion in the routing table. 'ignore' means don't consider the route Enumeration: 'ignore': 3, 'accept': 1.
         wfRip6AcceptPreference 1.3.6.1.4.1.18.3.5.3.16.6.1.1.7 integer read-write
preference. This is a metric to be used to compare the route to other routes to the same destination. A value of 15 is 'most preferred'. This parameter only has meaning if the action is 'accept'.
         wfRip6AcceptPrecedence 1.3.6.1.4.1.18.3.5.3.16.6.1.1.8 integer read-write
precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the rule index is used (larger wins).
         wfRip6AcceptInject 1.3.6.1.4.1.18.3.5.3.16.6.1.1.9 octet string read-write
prefix injection list. this octet string should only be non-null if the action is 'accept' and if it is desired to insert prefixes into the routing table that differ from the actual advertised prefixes. For instance, if a number of prefixes in a certain range are learned, an aggregate advertisement could be inserted instead of the individual prefixes. If non-null, The octet string contains one or more 2-tuples of this form: first 16 octets: prefix next octet: prefix length Upon receiving a route that matches this filter, all prefixes in this list will be considered for inclusion in the routing table. If the list is null, the actual received network is considered. An encoding of ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff/128 means 'match the actual received prefix.' This allows insertion of an aggregate or default along with the actual prefix. This will only be used for routes received via RIPv6.
         wfRip6AcceptGateway 1.3.6.1.4.1.18.3.5.3.16.6.1.1.10 octet string read-write
RIPv6 gateway list. This octet string contains the addresses of one or more routers that could send RIPv6 updates to this router. If a router address is included in this list, this filter applies to RIPv6 advertisements from that router. If non-null, The octet string contains one or more 2-tuples of this form: first 4 octets: interface index next 16 octets: router address (::0 means any address) If null, this filter applies to RIPv6 updates from any router.
         wfRip6AcceptInterface 1.3.6.1.4.1.18.3.5.3.16.6.1.1.11 octet string read-write
RIPv6 interface list. This octet string contains the addresses of one or more interfaces on this router. If an interface address is included in this list, this filter applies to RIPv6 advertisements received on that interface. If non-null, The octet string contains one or more 4-octet interface indexes. If null, this filter applies to RIPv6 updates received on any interface.
         wfRip6AcceptLog 1.3.6.1.4.1.18.3.5.3.16.6.1.1.12 integer read-write
Log Action. If 'true(1), a log event is generated when a prefix matches this filter rule; if 'false(2)', no logging is done. Enumeration: 'false': 2, 'true': 1.
 wfRip6AnnounceTable 1.3.6.1.4.1.18.3.5.3.16.6.2 no-access
The Table of RIPv6 Announce Route Policy Rules
     wfRip6AnnounceEntry 1.3.6.1.4.1.18.3.5.3.16.6.2.1 no-access
An entry in the RIPv6 Announce Rule Table
         wfRip6AnnounceDelete 1.3.6.1.4.1.18.3.5.3.16.6.2.1.1 integer read-write
Create/Delete parameter. Enumeration: 'deleted': 2, 'created': 1.
         wfRip6AnnounceDisable 1.3.6.1.4.1.18.3.5.3.16.6.2.1.2 integer read-write
Enable/Disable parameter. Enumeration: 'disabled': 2, 'enabled': 1.
         wfRip6AnnounceIndex 1.3.6.1.4.1.18.3.5.3.16.6.2.1.3 integer read-only
Rule index number
         wfRip6AnnounceName 1.3.6.1.4.1.18.3.5.3.16.6.2.1.4 displaystring read-write
Rule name - user specified name for this rule
         wfRip6AnnouncePrefixes 1.3.6.1.4.1.18.3.5.3.16.6.2.1.5 octet string read-write
Prefix identification list. This identifies which Prefixes will match this rule. If non-null, The octet string contains one or more 3-tuples of this form: first octet: exact (1) or range (2) next 16 octets: prefix next octet: prefix length An entry with an 'exact' tag means to only match the specific prefix advertisement (prefix & length). An entry with a 'range' tag means to match any prefix that falls in the range indicated by the prefix and length. An 'exact' encoding of ::0/0 means 'match the default route. A 'range' encoding of ::0/0 means 'match any route'. A null string also means 'match any route'.
         wfRip6AnnounceAction 1.3.6.1.4.1.18.3.5.3.16.6.2.1.6 integer read-write
action. 'announce' means that the route should be advertised. 'ignore' means don't advertise the route. Enumeration: 'ignore': 3, 'announce': 2.
         wfRip6AnnouncePrecedence 1.3.6.1.4.1.18.3.5.3.16.6.2.1.7 integer read-write
precedence. This is a metric to be used to compare this policy rule to other rules that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the rule index is used (larger wins).
         wfRip6AnnounceRouteSource 1.3.6.1.4.1.18.3.5.3.16.6.2.1.8 integer read-write
route source. This parameter can contain one or more route source identifiers. If the route source is in this bit map, then a route from that source that meets the other criteria of this filter will match the filter. bit 0 bit 31 +---------------------------------------+ | | +---------------------------------------+ bit31 DIRECT bit30 STATIC bit29 RIP bit28 OSPF bit27 BGP
         wfRip6AnnounceExtRouteSource 1.3.6.1.4.1.18.3.5.3.16.6.2.1.9 integer read-write
external route source. This parameter can contain one or more external route source identifiers. If the external route source is in this bit map, then a route from that external source that meets the other criteria of this filter will match the filter. bit 0 bit 31 +---------------------------------------+ | | +---------------------------------------+ bit31 DIRECT bit30 STATIC bit29 RIP bit28 OSPF bit27 BGP
         wfRip6AnnounceAdvertise 1.3.6.1.4.1.18.3.5.3.16.6.2.1.10 octet string read-write
network advertisement list. this octet string should only be non-null if the action is 'announce' and if it is desired to advertise networks that differ from the actual network in the routing table. For instance, if a number of networks in a certain range are in the table, an aggregate could be advertised instead of the individual networks. If non-null, The octet string contains one or more 2-tuples of this form: first 16 octets: prefix next octet: length Upon receiving a route that matches this filter, all prefixes in this list will be advertised. If the list is null, the actual prefix is advertised. An encoding of ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff/128 means 'match the actual prefix.' This allows advertisement of an aggregate or default along with the actual prefix.
         wfRip6AnnounceRipGateway 1.3.6.1.4.1.18.3.5.3.16.6.2.1.11 octet string read-write
from RIPv6' gateway list. Only applicable for RIPv6 sourced routes and if RIPv6 is included as a route source. This octet string contains the addresses of one or more routers that could send RIPv6 updates to this router. If a router address is included in this list, this filter applies to RIPv6 advertisements from that router. If non-null, The octet string contains one or more 2-tuples of this form: first 4 octets: interface index next 16 octets: router address (::0 means any address) If null, this filter applies to RIPv6 updates from any router.
         wfRip6AnnounceInterface 1.3.6.1.4.1.18.3.5.3.16.6.2.1.12 octet string read-write
RIPv6 outbound interface list. This is a list of outgoing RIPv6 interfaces. If an interface appears in this list, the filter applies to RIPv6 advertisements sent via that interface. If non-null, The octet string contains one or more 4-octet interface indexes. If null, this filter applies to RIPv6 updates received on any interface.
         wfRip6AnnounceRipMetric 1.3.6.1.4.1.18.3.5.3.16.6.2.1.13 integer read-write
RIPv6 metric. Only valid if the action is 'propagate'. This is an optional export metric to use when advertising a route that matches this filter. If zero, the routing table metric calculated for RIPv6 plus the interface cost is used.