Wellfleet-OSI-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-OSI-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfOsi 1.3.6.1.4.1.18.3.5.6.1
     wfOsiDelete 1.3.6.1.4.1.18.3.5.6.1.1 integer read-write
This value determines whether OSI is configured on this slot. Enumeration: 'deleted': 2, 'created': 1.
     wfOsiDisable 1.3.6.1.4.1.18.3.5.6.1.2 integer read-write
This value determines whether OSI is to startup. Enumeration: 'disabled': 2, 'enabled': 1.
     wfOsiState 1.3.6.1.4.1.18.3.5.6.1.3 integer read-only
This value determines whether OSI is to startup. Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
     wfOsiIsisVersion 1.3.6.1.4.1.18.3.5.6.1.4 displaystring read-only
This read-only parameter identifies the version number of the IS-IS protocol to which this node conforms to.
     wfOsiRouterType 1.3.6.1.4.1.18.3.5.6.1.5 integer read-write
This value determines whether this system is an L1-only router or L1-L2 IS. Enumeration: 'l1only': 1, 'l1l2': 3.
     wfOsiRouterId 1.3.6.1.4.1.18.3.5.6.1.6 octet string read-write
This value contains the system ID of this Intermediate System. If no value is entered by the user, Site Manager should supply a 6-byte value that will be unique (a MAC address would work).
     wfOsiLoadBal 1.3.6.1.4.1.18.3.5.6.1.7 integer read-write
This Boolean defines whether or not we are doing load balancing over multiple paths. Enumeration: 'disabled': 2, 'enabled': 1.
     wfOsiMaxAreas 1.3.6.1.4.1.18.3.5.6.1.8 integer read-write
This value defines the maximum allowable number of areas addresses for the domain that this router exists in.
     wfOsiMaxEs 1.3.6.1.4.1.18.3.5.6.1.9 integer read-write
This value defines the maximum allowable number of End Systems for the area that this router exists in.
     wfOsiMaxL1Is 1.3.6.1.4.1.18.3.5.6.1.10 integer read-write
This value defines the maximum allowable number of L1 Intermediate Systems for the area that this router exists in.
     wfOsiMaxL2Is 1.3.6.1.4.1.18.3.5.6.1.11 integer read-write
This value defines the maximum allowable number of L2 Intermediate Systems for the domain that this router exists in.
     wfOsiMaxExtAddr 1.3.6.1.4.1.18.3.5.6.1.12 integer read-write
This value defines the maximum allowable number of External Addresses for the domain that this router exists in. The default value of this field is 0.
     wfOsiCksumIsPdus 1.3.6.1.4.1.18.3.5.6.1.13 integer read-write
This value indicates whether ISIS PDUs will carry a checksum. Enumeration: 'disabled': 2, 'enabled': 1.
     wfOsiL1LspPassword 1.3.6.1.4.1.18.3.5.6.1.14 displaystring read-write
This assigns a password such that only L1 Lsps with the matching password will be accepted. All L1 Lsps generated by this system will contain this string in the password option.
     wfOsiL2LspPassword 1.3.6.1.4.1.18.3.5.6.1.15 displaystring read-write
This assigns a password such that only L2 Lsps with the matching password will be accepted. All L2 Lsps generated by this system will contain this string in the password option.
     wfOsiAreaAddr 1.3.6.1.4.1.18.3.5.6.1.16 octet string read-write
This Assigns the area address for this router. This field must be filled in. If the user doesn't enter a value, then assign 490040. Site Manager must force the user to enter at least a 3-byte value for this field.
     wfOsiAreaAddrAlias1 1.3.6.1.4.1.18.3.5.6.1.17 octet string read-write
This Assigns the first area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length.
     wfOsiAreaAddrAlias2 1.3.6.1.4.1.18.3.5.6.1.18 octet string read-write
This Assigns the second area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length.
     wfOsiCorruptedLsps 1.3.6.1.4.1.18.3.5.6.1.19 counter read-only
Number of Corrupted Lsps Detected.
     wfOsiL1LspDbOverloads 1.3.6.1.4.1.18.3.5.6.1.20 counter read-only
Number of times the L1 Lsp Database Overload event has been generated.
     wfOsiL2LspDbOverloads 1.3.6.1.4.1.18.3.5.6.1.21 counter read-only
Number of times the L2 Lsp Database Overload event has been generated.
     wfOsiManAddrDroppedAreas 1.3.6.1.4.1.18.3.5.6.1.22 counter read-only
Number of times the Manual Address Dropped from Area event has been generated.
     wfOsiSeqNumberSkips 1.3.6.1.4.1.18.3.5.6.1.23 counter read-only
Number of times the Sequence Number Skipped event has been generated.
     wfOsiOwnLspPurges 1.3.6.1.4.1.18.3.5.6.1.24 counter read-only
Number of times the Own Lsp Purged event has been generated.
     wfOsiOthLspPurges 1.3.6.1.4.1.18.3.5.6.1.25 counter read-only
Number of times the Other Lsp Purged event has been generated.
     wfOsiExceedMaxSeqNums 1.3.6.1.4.1.18.3.5.6.1.26 counter read-only
Number of times the Attempt tp Exceed Maximum Sequence Number event has been generated.
     wfOsiNearestL2Is 1.3.6.1.4.1.18.3.5.6.1.27 octet string read-only
This is the ID of the Nearest L2 system in this area.
     wfOsiMaxDynEs 1.3.6.1.4.1.18.3.5.6.1.28 integer read-write
This is the maximum number of dynamically learned (via Hello) End Systems allowed per slot.
     wfOsiMaxDynL1Is 1.3.6.1.4.1.18.3.5.6.1.29 integer read-write
This is the maximum number of dynamically learned (via Hello) Level 1 Intermediate Systems allowed per slot.
     wfOsiMaxDynL2Is 1.3.6.1.4.1.18.3.5.6.1.30 integer read-write
This is the maximum number of dynamically learned (via Hello) Level 2 Intermediate Systems allowed per slot.
     wfOsiNumDynEsAdjs 1.3.6.1.4.1.18.3.5.6.1.31 counter read-only
Number of Dynamic ES adjs the osi master gate receives from the cct gate.
     wfOsiNumDynL1Adjs 1.3.6.1.4.1.18.3.5.6.1.32 counter read-only
Number of Dynamic L1 adjs the osi master gate receives from the cct gate.
     wfOsiNumDynL2Adjs 1.3.6.1.4.1.18.3.5.6.1.33 counter read-only
Number of Dynamic L2 adjs the osi master gate receives from the cct gate.
     wfOsiNumL1Routes 1.3.6.1.4.1.18.3.5.6.1.34 counter read-only
Number of L1 Routes. WL 2.27.93
     wfOsiNumL2Routes 1.3.6.1.4.1.18.3.5.6.1.35 counter read-only
Number of L2 Routes. WL 2.27.93
     wfOsiNumDynPtpEsAdjs 1.3.6.1.4.1.18.3.5.6.1.36 counter read-only
Number of Dynamic Point-to-Point ES adjs the osi master gate receives on.
     wfOsiNumDynPtpIsAdjs 1.3.6.1.4.1.18.3.5.6.1.37 counter read-only
Number of Dynamic Point-to-Point IS adjs the osi master gate receives on .
     wfOsiClnpSrcRtOptionDisable 1.3.6.1.4.1.18.3.5.6.1.38 integer read-write
Enable/Disable processing of Source Route options in CLNP PDUs. This is required for GOSIP v2 support. GOSIP prohibits processing Source Routing options. Enumeration: 'disabled': 2, 'enabled': 1.
     wfOsiNumL1Lsps 1.3.6.1.4.1.18.3.5.6.1.39 counter read-only
Number of L1 LSPs stored in database.
     wfOsiNumL2Lsps 1.3.6.1.4.1.18.3.5.6.1.40 counter read-only
Number of L2 LSPs stored in database.
     wfOsiFletchRelaxedEnable 1.3.6.1.4.1.18.3.5.6.1.41 integer read-write
Enable/Disable whether non-standard Fletcher Checksums are allowed in LSP's. If enabled, a log message will be generated, otherwise the LSP will be rejected. Enumeration: 'disabled': 2, 'enabled': 1.
 wfOsiStaticRouteTable 1.3.6.1.4.1.18.3.5.6.2 no-access
This table contains all the static routes for this system.
     wfOsiStaticRouteEntry 1.3.6.1.4.1.18.3.5.6.2.1 no-access
This is the Static Route Entry for the Static Route Table.
         wfOsiStaticRouteDelete 1.3.6.1.4.1.18.3.5.6.2.1.1 integer read-write
Create/Delete parameter for Osi Static Route Record. Enumeration: 'deleted': 2, 'created': 1.
         wfOsiStaticRouteDisable 1.3.6.1.4.1.18.3.5.6.2.1.2 integer read-write
Enable/Disable parameter for this Static Route. Enumeration: 'disabled': 2, 'enabled': 1.
         wfOsiStaticRouteAddr 1.3.6.1.4.1.18.3.5.6.2.1.3 octet string read-only
This specifies the address of the static route. It is also the inst_id.
         wfOsiStaticRouteNibbleLength 1.3.6.1.4.1.18.3.5.6.2.1.4 integer read-write
This is the length in nibbles of the static route address. It is necessary to specify it in nibbles since the static route may be an external address which can be specified in nibbles.
         wfOsiStaticRouteNextHopIs 1.3.6.1.4.1.18.3.5.6.2.1.5 octet string read-write
This is the 6-octet ID of the next Hop IS that all data destined to wfOsiStaticRouteAddr will be forwarded to.
         wfOsiStaticRouteType 1.3.6.1.4.1.18.3.5.6.2.1.6 integer read-write
This specifies whether the destination is an End System, an area, or an external Domain. Enumeration: 'areaaddr': 11, 'extaddr': 13, 'es': 9.
         wfOsiStaticRouteCost 1.3.6.1.4.1.18.3.5.6.2.1.7 integer read-write
This value is the cost to get to this address.
 wfOsiCircuitTable 1.3.6.1.4.1.18.3.5.6.3 no-access
This Table contains all circuit configuration info counters available on a per circuit basis.
     wfOsiCircuitEntry 1.3.6.1.4.1.18.3.5.6.3.1 no-access
This is the circuit entry record that appears in the Circuit Table.
         wfOsiCircuitDelete 1.3.6.1.4.1.18.3.5.6.3.1.1 integer read-write
This value determines whether this circuit is configured. Enumeration: 'deleted': 2, 'created': 1.
         wfOsiCircuitDisable 1.3.6.1.4.1.18.3.5.6.3.1.2 integer read-write
Enable/Disable parameter for this circuit. Enumeration: 'disabled': 2, 'enabled': 1.
         wfOsiCircuitState 1.3.6.1.4.1.18.3.5.6.3.1.3 integer read-only
This indicates whether the circuit state is up or down. Enumeration: 'down': 2, 'up': 1.
         wfOsiCircuitId 1.3.6.1.4.1.18.3.5.6.3.1.4 integer read-only
A unique value for each known circuit.
         wfOsiCircuitRouterLevel 1.3.6.1.4.1.18.3.5.6.3.1.5 integer read-write
This is the level protocol that the circuit runs. Its a bit mask to allow for some combination of L1, L2, External, ES-IS-only. Enumeration: 'l1l2': 3, 'ext': 4, 'l2': 2, 'l2ext': 6, 'l1': 1, 'esisonly': 8, 'l1l2ext': 7.
         wfOsiCircuitL1DefaultMetric 1.3.6.1.4.1.18.3.5.6.3.1.6 integer read-write
This is the default cost of using this circuit for L1 traffic.
         wfOsiCircuitL2DefaultMetric 1.3.6.1.4.1.18.3.5.6.3.1.7 integer read-write
This is the default cost of using this circuit for L2 traffic.
         wfOsiCircuitL1DrPriority 1.3.6.1.4.1.18.3.5.6.3.1.8 integer read-write
This is the priority for this system to become L1 designated router on this LAN circuit.
         wfOsiCircuitL2DrPriority 1.3.6.1.4.1.18.3.5.6.3.1.9 integer read-write
This is the priority for this system to become L2 designated router on this LAN circuit.
         wfOsiCircuitIsisHelloTimer 1.3.6.1.4.1.18.3.5.6.3.1.10 integer read-write
This is the period (secs) between IIH hello transmissions.
         wfOsiCircuitEsisHelloTimer 1.3.6.1.4.1.18.3.5.6.3.1.11 integer read-write
This is the period (secs) between ISH hello transmissions.
         wfOsiCircuitEshConfigTime 1.3.6.1.4.1.18.3.5.6.3.1.12 integer read-write
This is the suggested time between ESH transmissions from an ES went in ISHs (ESCT).
         wfOsiCircuitPassword 1.3.6.1.4.1.18.3.5.6.3.1.13 displaystring read-write
This is Circuit Password for this circuit. Used to filter out Hellos from systems without the correct password.
         wfOsiCircuitReceivedPkts 1.3.6.1.4.1.18.3.5.6.3.1.14 counter read-only
This is the number of pkts that have been received on this circuit.
         wfOsiCircuitSentPkts 1.3.6.1.4.1.18.3.5.6.3.1.15 counter read-only
This is the number of pkts sent out this circuit.
         wfOsiCircuitDroppedPkts 1.3.6.1.4.1.18.3.5.6.3.1.16 counter read-only
This is the number of pkts dropped on this circuit.
         wfOsiCircuitFragmentedPdus 1.3.6.1.4.1.18.3.5.6.3.1.17 counter read-only
This is the number of pdus that had to be fragmented when forwarded out this circuit.
         wfOsiCircuitCongestionDiscards 1.3.6.1.4.1.18.3.5.6.3.1.18 counter read-only
This is the number of PDUs dropped because of congestion.
         wfOsiCircuitAddrUnreachDiscards 1.3.6.1.4.1.18.3.5.6.3.1.19 counter read-only
This is the number of PDUs dropped because the destination is unreachable.
         wfOsiCircuitAgedPduDiscards 1.3.6.1.4.1.18.3.5.6.3.1.20 counter read-only
This is the number of PDUs dropped because of aging.
         wfOsiCircuitPduFormatErrDiscards 1.3.6.1.4.1.18.3.5.6.3.1.21 counter read-only
This is the number of PDUs dropped because of Format Error.
         wfOsiCircuitUnsuppOptsDiscards 1.3.6.1.4.1.18.3.5.6.3.1.22 counter read-only
This is the number of PDUs dropped because they contain unsupported options.
         wfOsiCircuitSentErrorReports 1.3.6.1.4.1.18.3.5.6.3.1.23 counter read-only
This is the number of error reports sent out this circuit.
         wfOsiCircuitReceivedControlPdus 1.3.6.1.4.1.18.3.5.6.3.1.24 counter read-only
This is the number of ESIS or ISIS PDUs received on this circuit.
         wfOsiCircuitSentControlPdus 1.3.6.1.4.1.18.3.5.6.3.1.25 counter read-only
This is the number of ESIS or ISIS PDUs sent out this circuit.
         wfOsiCircuitStateChanges 1.3.6.1.4.1.18.3.5.6.3.1.26 counter read-only
This is the number of times the circuit goes from down to up or from up to down.
         wfOsiCircuitAdjStateChanges 1.3.6.1.4.1.18.3.5.6.3.1.27 counter read-only
This is the number of times an adjacency off of this circuit goes from down to up or from up to down state.
         wfOsiCircuitInitFailures 1.3.6.1.4.1.18.3.5.6.3.1.28 counter read-only
This is the number of times this circuit fails to initialize.
         wfOsiCircuitRejectedAdjs 1.3.6.1.4.1.18.3.5.6.3.1.29 counter read-only
This is the number of Adjacencies that were rejected on this circuit.
         wfOsiCircuitReceivedBadLsps 1.3.6.1.4.1.18.3.5.6.3.1.30 counter read-only
This is the number of bad Lsps received on this circuit.
         wfOsiCircuitReceivedBadSnps 1.3.6.1.4.1.18.3.5.6.3.1.31 counter read-only
This is the number of BAD Sequence Number Pdus received on this circuit.
         wfOsiCircuitReceivedBadEshs 1.3.6.1.4.1.18.3.5.6.3.1.32 counter read-only
This is the number of bad ESHs received on this circuit.
         wfOsiCircuitReceivedBadL1Iihs 1.3.6.1.4.1.18.3.5.6.3.1.33 counter read-only
This is the number of bad L1 IIHs received on this circuit.
         wfOsiCircuitReceivedBadL2Iihs 1.3.6.1.4.1.18.3.5.6.3.1.34 counter read-only
This is the number of bad L2 IIHs received on this circuit.
         wfOsiCircuitL1DrChanges 1.3.6.1.4.1.18.3.5.6.3.1.35 counter read-only
This is the number of times the L1 Designated Router has been elected on this circuit.
         wfOsiCircuitL2DrChanges 1.3.6.1.4.1.18.3.5.6.3.1.36 counter read-only
This is the number of times the L2 Designated Router has been elected on this circuit.
         wfOsiCircuitClnpForwarding 1.3.6.1.4.1.18.3.5.6.3.1.37 counter read-only
This shows whether forwarding is enabled over this circuit.
         wfOsiCircuitClnpDefaultLifeTime 1.3.6.1.4.1.18.3.5.6.3.1.38 counter read-only
This is the lifetime included in clnp pdus generated by this router (i.e. echo and echo reply pdus, error report pdus).
         wfOsiCircuitClnpInReceives 1.3.6.1.4.1.18.3.5.6.3.1.39 counter read-only
This is the number of CLNP pdus received from this circuit.
         wfOsiCircuitClnpInAddrErrors 1.3.6.1.4.1.18.3.5.6.3.1.40 counter read-only
This is the number of CLNP pdus recived from this circuit with Address format errors.
         wfOsiCircuitClnpForwPdus 1.3.6.1.4.1.18.3.5.6.3.1.41 counter read-only
This is the number of Clnp PDUs received on this circuit that are forwarded.
         wfOsiCircuitClnpInUnknownNlps 1.3.6.1.4.1.18.3.5.6.3.1.42 counter read-only
This is the number of Clnp PDUs received on this circuit where the network layer addressed is unknown (Bad NLPID).
         wfOsiCircuitClnpInDelivers 1.3.6.1.4.1.18.3.5.6.3.1.43 counter read-only
This is the number of Clnp PDUs received on this circuit whose destination is this router.
         wfOsiCircuitClnpInUnknownUlps 1.3.6.1.4.1.18.3.5.6.3.1.44 counter read-only
This is number of Clnp PDUs received on this circuit addressed to this router where the upper layer is unknown.
         wfOsiCircuitClnpSegCreates 1.3.6.1.4.1.18.3.5.6.3.1.45 counter read-only
This is the number of CLNP segments created from pdus received on this circuit.
         wfOsiCircuitClnpInOpts 1.3.6.1.4.1.18.3.5.6.3.1.46 counter read-only
This is the number of CLNP pdus received with an options portion.
         wfOsiCircuitClnpOutOpts 1.3.6.1.4.1.18.3.5.6.3.1.47 counter read-only
This is the number of CLNP pdus sent with an options portion.
         wfOsiCircuitEsisEshIns 1.3.6.1.4.1.18.3.5.6.3.1.48 counter read-only
This is the number of ESHs received from this circuit.
         wfOsiCircuitEsisIshOuts 1.3.6.1.4.1.18.3.5.6.3.1.49 counter read-only
This is the number of ISHs sent out this circuit.
         wfOsiCircuitEsisRduOuts 1.3.6.1.4.1.18.3.5.6.3.1.50 counter read-only
This is the number of Redirects sent out this circuit.
         wfOsiCircuitL1DesignatedRouter 1.3.6.1.4.1.18.3.5.6.3.1.51 octet string read-only
This is the ID of the L1 Designated Router on this circuit.
         wfOsiCircuitL2DesignatedRouter 1.3.6.1.4.1.18.3.5.6.3.1.52 octet string read-only
This is the ID of the L2 Designated Router on this circuit.
         wfOsiCircuitClnpOutEchoReplies 1.3.6.1.4.1.18.3.5.6.3.1.53 counter read-only
This is the number of CLNP Echo Replies sent out this circuit.
         wfOsiCircuitClnpOutEchoRequests 1.3.6.1.4.1.18.3.5.6.3.1.54 counter read-only
This is the number of Clnp Echo Requests sent out this circuit.
         wfOsiCircuitClnpInEchoReplies 1.3.6.1.4.1.18.3.5.6.3.1.55 counter read-only
This is the number of CLNP Echo Replies received on this circuit.
         wfOsiCircuitClnpInEchoRequests 1.3.6.1.4.1.18.3.5.6.3.1.56 counter read-only
This is the number of CLNP Echo Requests recived on this circuit.
         wfOsiCircuitNumDynEsAdjs 1.3.6.1.4.1.18.3.5.6.3.1.57 counter read-only
This is the number of Dynamic End System Adjacencies formed on this circuit.
         wfOsiCircuitNumDynL1Adjs 1.3.6.1.4.1.18.3.5.6.3.1.58 counter read-only
This is the number of Dynamic Level 1 Intermediate System Adjacencies formed on this circuit.
         wfOsiCircuitNumDynL2Adjs 1.3.6.1.4.1.18.3.5.6.3.1.59 counter read-only
This is the number of Dynamic Level 2 Intermediate System Adjacencies formed on this circuit.
         wfOsiCircuitNumDynPtpIsAdjs 1.3.6.1.4.1.18.3.5.6.3.1.60 counter read-only
This is the number of Dynamic Intermediate System Point-to-Point Adjacencies formed on this circuit.
         wfOsiCircuitNumDynPtpEsAdjs 1.3.6.1.4.1.18.3.5.6.3.1.61 counter read-only
This is the number of Dynamic End System Point-to-Point Adjaciences formed on this circuit.
         wfOsiCircuitBadIshReceived 1.3.6.1.4.1.18.3.5.6.3.1.62 counter read-only
This is the number of bad Intermediate System Hellos received on this circuit. These will only be received on Point-to-Point circuits.
         wfOsiCircuitEsisIshIns 1.3.6.1.4.1.18.3.5.6.3.1.63 counter read-only
This is the number of good Intermediate System Hellos received on this circuit. These will only be received on Point-to-Point circuits.
         wfOsiCircuitIihHoldMultiplier 1.3.6.1.4.1.18.3.5.6.3.1.64 integer read-write
This is the multiplier value used to compute the hold time set in the IIH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier.
         wfOsiCircuitIshHoldMultiplier 1.3.6.1.4.1.18.3.5.6.3.1.65 integer read-write
This is the multiplier value used to compute the hold time set in the ISH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier.
         wfOsiCircuitDisableRedirect 1.3.6.1.4.1.18.3.5.6.3.1.66 integer read-write
Allow Redirects to be disabled. This is required when operating over Frame Relay in group mode in a partial mesh topology. Enumeration: 'disabled': 2, 'enabled': 1.
 wfOsiExternalAddressTable 1.3.6.1.4.1.18.3.5.6.4 no-access
This is the table of External Addresses for this Router.
     wfOsiExternalAddressEntry 1.3.6.1.4.1.18.3.5.6.4.1 no-access
This is the External Address Record for this Router.
         wfOsiExtAddrDelete 1.3.6.1.4.1.18.3.5.6.4.1.1 integer read-write
This is the Create/Delete parameter for this ExtAddr entry. Enumeration: 'deleted': 2, 'created': 1.
         wfOsiExtAddrDisable 1.3.6.1.4.1.18.3.5.6.4.1.2 integer read-write
Enable/Disable parameter for this ExtAddr. Enumeration: 'disabled': 2, 'enabled': 1.
         wfOsiExtAddr 1.3.6.1.4.1.18.3.5.6.4.1.3 octet string read-only
This is the prefix external address. It is also the inst_id.
         wfOsiExtAddrCircuit 1.3.6.1.4.1.18.3.5.6.4.1.4 integer read-only
This is the circuit to go out for this adj.
         wfOsiExtAddrNibbleLength 1.3.6.1.4.1.18.3.5.6.4.1.5 integer read-write
This is the length in nibbles of the external address.
         wfOsiExtAddrSnpa 1.3.6.1.4.1.18.3.5.6.4.1.6 octet string read-write
This is the SNPA of the neighbor on this circuit.
         wfOsiExtAddrCost 1.3.6.1.4.1.18.3.5.6.4.1.7 integer read-write
This is the external metric cost to this address.
 wfOsiStaticEsTable 1.3.6.1.4.1.18.3.5.6.5 no-access
This is the Static ES Table for this router.
     wfOsiStaticEsEntry 1.3.6.1.4.1.18.3.5.6.5.1 no-access
This is the Static ES entry for the Static ES Table.
         wfOsiStaticEsDelete 1.3.6.1.4.1.18.3.5.6.5.1.1 integer read-write
This is the Create/Delete parameter for this Static ES entry. Enumeration: 'deleted': 2, 'created': 1.
         wfOsiStaticEsDisable 1.3.6.1.4.1.18.3.5.6.5.1.2 integer read-write
Enable/Disable parameter for this Static ES. Enumeration: 'disabled': 2, 'enabled': 1.
         wfOsiStaticEsId 1.3.6.1.4.1.18.3.5.6.5.1.3 octet string read-only
This is the ESID of the neighbor.
         wfOsiStaticEsCircuit 1.3.6.1.4.1.18.3.5.6.5.1.4 integer read-only
This is the circuit to go out for this adj.
         wfOsiStaticEsSnpa 1.3.6.1.4.1.18.3.5.6.5.1.5 octet string read-write
This is the SNPA of the neighbor on this circuit.
 wfOsiTrafficFilterTable 1.3.6.1.4.1.18.3.5.6.6 no-access
OSI Traffic Filters
     wfOsiTrafficFilterEntry 1.3.6.1.4.1.18.3.5.6.6.1 no-access
A traffic filter definition
         wfOsiTrafficFilterDelete 1.3.6.1.4.1.18.3.5.6.6.1.1 integer read-write
Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted. Enumeration: 'deleted': 2, 'created': 1.
         wfOsiTrafficFilterDisable 1.3.6.1.4.1.18.3.5.6.6.1.2 integer read-write
Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. Enumeration: 'disabled': 2, 'enabled': 1.
         wfOsiTrafficFilterStatus 1.3.6.1.4.1.18.3.5.6.6.1.3 integer read-only
Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule. Enumeration: 'active': 1, 'inactive': 3, 'error': 2.
         wfOsiTrafficFilterCounter 1.3.6.1.4.1.18.3.5.6.6.1.4 counter read-only
The number of received packets that have matched this rule.
         wfOsiTrafficFilterDefinition 1.3.6.1.4.1.18.3.5.6.6.1.5 opaque read-write
The filter rule definition.
         wfOsiTrafficFilterReserved 1.3.6.1.4.1.18.3.5.6.6.1.6 integer read-only
Reserved field.
         wfOsiTrafficFilterCircuit 1.3.6.1.4.1.18.3.5.6.6.1.7 integer read-only
The ID of the Circuit to which the filter is applied.
         wfOsiTrafficFilterRuleNumber 1.3.6.1.4.1.18.3.5.6.6.1.8 integer read-only
ID for the rule.
         wfOsiTrafficFilterFragment 1.3.6.1.4.1.18.3.5.6.6.1.9 integer read-only
Fragment number - for large rules.
         wfOsiTrafficFilterName 1.3.6.1.4.1.18.3.5.6.6.1.10 displaystring read-write
name of the rule number
 wfOsiL1LspHdrTable 1.3.6.1.4.1.18.3.5.6.7 no-access
2 u_int32's so the inst_id len is 2.
     wfOsiL1LspHdrEntry 1.3.6.1.4.1.18.3.5.6.7.1 no-access
A Record in the Level 1 Lsp Header Table
         wfOsiL1LspHdrLspId 1.3.6.1.4.1.18.3.5.6.7.1.1 octet string read-only
LSPID = Source ID + Pseudo-node ID + LSP number
         wfOsiL1LspHdrLifetime 1.3.6.1.4.1.18.3.5.6.7.1.2 integer read-only
Lsp Lifetime
         wfOsiL1LspHdrSeqnum 1.3.6.1.4.1.18.3.5.6.7.1.3 integer read-only
Lsp sequence number
         wfOsiL1LspHdrFlags 1.3.6.1.4.1.18.3.5.6.7.1.4 octet string read-only
Flags: P/ATT/LSPDBOL/IS type
         wfOsiL1LspHdrCksum 1.3.6.1.4.1.18.3.5.6.7.1.5 octet string read-only
Checksum
 wfOsiL2LspHdrTable 1.3.6.1.4.1.18.3.5.6.8 no-access
2 u_int32's so the inst_id len is 2.
     wfOsiL2LspHdrEntry 1.3.6.1.4.1.18.3.5.6.8.1 no-access
A Record in the Lsp Header Table
         wfOsiL2LspHdrLspId 1.3.6.1.4.1.18.3.5.6.8.1.1 octet string read-only
LSPID = Source ID + Pseudo-node ID + LSP number
         wfOsiL2LspHdrLifetime 1.3.6.1.4.1.18.3.5.6.8.1.2 integer read-only
Lsp Lifetime
         wfOsiL2LspHdrSeqnum 1.3.6.1.4.1.18.3.5.6.8.1.3 integer read-only
Lsp sequence number
         wfOsiL2LspHdrFlags 1.3.6.1.4.1.18.3.5.6.8.1.4 octet string read-only
Flags: P/ATT/LSPDBOL/IS type
         wfOsiL2LspHdrCksum 1.3.6.1.4.1.18.3.5.6.8.1.5 octet string read-only
Checksum
 wfOsiDynAdjTable 1.3.6.1.4.1.18.3.5.6.9 no-access
Dynamic Adjacency Table
     wfOsiDynAdjEntry 1.3.6.1.4.1.18.3.5.6.9.1 no-access
Adjacency Table - the real index is the adjacency id
         wfOsiDynAdjId 1.3.6.1.4.1.18.3.5.6.9.1.1 integer read-only
Index in the Adjacency Table
         wfOsiDynAdjDatabase 1.3.6.1.4.1.18.3.5.6.9.1.2 integer read-only
Database into which the Adjacency is stored, 1=ES, 2=Level 1 IS, 3=Level 2 IS.
         wfOsiDynAdjType 1.3.6.1.4.1.18.3.5.6.9.1.3 integer read-only
The type of adjacency. (see Osi_const.h)
         wfOsiDynAdjState 1.3.6.1.4.1.18.3.5.6.9.1.4 integer read-only
The state of the adjacency. INITIALIZING, UP or FAILED
         wfOsiDynAdjCircuitId 1.3.6.1.4.1.18.3.5.6.9.1.5 integer read-only
A unique value for each known circuit.
         wfOsiDynAdjHoldTime 1.3.6.1.4.1.18.3.5.6.9.1.6 integer read-only
Hold Time received from neighbor.
         wfOsiDynAdjPriority 1.3.6.1.4.1.18.3.5.6.9.1.7 integer read-only
Priority to become designated router. IS only.
         wfOsiDynAdjSnpaAddr 1.3.6.1.4.1.18.3.5.6.9.1.8 octet string read-only
SNAP address for neighbor.
         wfOsiDynAdjNsapAddr 1.3.6.1.4.1.18.3.5.6.9.1.9 octet string read-only
Neighbor address (NSAP).
         wfOsiDynAdjLanId 1.3.6.1.4.1.18.3.5.6.9.1.10 octet string read-only
LAN ID from Designated Router. IS only.
 wfOsiL1RoutesTable 1.3.6.1.4.1.18.3.5.6.10 no-access
This is the L1 Routes Table for this router.
       wfOsiL1RouteEntry 1.3.6.1.4.1.18.3.5.6.10.1 no-access
This is the L1 Route entry for the Routes Table.
           wfOsiL1RouteId 1.3.6.1.4.1.18.3.5.6.10.1.1 octet string read-only
This is the SysID of the L1 Destination.
           wfOsiL1RoutePathSplit 1.3.6.1.4.1.18.3.5.6.10.1.2 integer read-only
This assigns a number to each equal cost path to the destination. There can be up to 2 equal cost paths to a destination.
           wfOsiL1RouteType 1.3.6.1.4.1.18.3.5.6.10.1.3 integer read-only
This tells what kind of a route this entry is.
           wfOsiL1RouteNextHopSnpa 1.3.6.1.4.1.18.3.5.6.10.1.4 octet string read-only
This is the SNPA of the next hop adj for this route.
           wfOsiL1RouteNextHopId 1.3.6.1.4.1.18.3.5.6.10.1.5 octet string read-only
This is the ID of the next hop adjacency to this route. If its just an ES then it is the 6byte System ID. If the next HOP is an IS then it is the NET.
           wfOsiL1RouteNextHopType 1.3.6.1.4.1.18.3.5.6.10.1.6 integer read-only
This is the adj type of the next hop for this route.
           wfOsiL1RouteNextHopCircuit 1.3.6.1.4.1.18.3.5.6.10.1.7 integer read-only
This is the circuit to forward out for this route.
           wfOsiL1RouteDefaultMetricCost 1.3.6.1.4.1.18.3.5.6.10.1.8 integer read-only
This is the cost to from this system to this destination.
 wfOsiL2RoutesTable 1.3.6.1.4.1.18.3.5.6.11 no-access
This is the L2 Routes Table for this router.
       wfOsiL2RouteEntry 1.3.6.1.4.1.18.3.5.6.11.1 no-access
This is the L2 Route entry for the Routes Table.
           wfOsiL2RouteId 1.3.6.1.4.1.18.3.5.6.11.1.1 octet string read-only
This is the SysID of the L2 Destination.
           wfOsiL2RoutePathSplit 1.3.6.1.4.1.18.3.5.6.11.1.2 integer read-only
This assigns a number to each equal cost path to the destination. There can be up to 2 equal cost paths to a destination.
           wfOsiL2RouteType 1.3.6.1.4.1.18.3.5.6.11.1.3 integer read-only
This tells what kind of a route this entry is.
           wfOsiL2RouteNextHopSnpa 1.3.6.1.4.1.18.3.5.6.11.1.4 octet string read-only
This is the SNPA of the neighbor on this circuit.
           wfOsiL2RouteNextHopId 1.3.6.1.4.1.18.3.5.6.11.1.5 octet string read-only
This is the ID of the next hop adjacency to this route. If its just an ES then it is the 6byte System ID. If the next HOP is an IS then it is the NET.
           wfOsiL2RouteNextHopType 1.3.6.1.4.1.18.3.5.6.11.1.6 integer read-only
This is the adj type of the next hop for this route.
           wfOsiL2RouteNextHopCircuit 1.3.6.1.4.1.18.3.5.6.11.1.7 integer read-only
This is the circuit to go out for this adj.
           wfOsiL2RouteDefaultMetricCost 1.3.6.1.4.1.18.3.5.6.11.1.8 integer read-only
This is the cost to from this system to this destination.
 wfOsiDecnetTrans 1.3.6.1.4.1.18.3.5.6.12
       wfOsiDecnetTransDelete 1.3.6.1.4.1.18.3.5.6.12.1 integer read-write
This value determines whether DECnet Phase 4 to Phase 5 Transition functions are configured. Enumeration: 'deleted': 2, 'created': 1.
       wfOsiDecnetTransDisable 1.3.6.1.4.1.18.3.5.6.12.2 integer read-write
This value determines whether DECnet Phase 4 to Phase 5 Transition functions are enabled. Enumeration: 'disabled': 2, 'enabled': 1.
       wfOsiDecnetTransState 1.3.6.1.4.1.18.3.5.6.12.3 integer read-only
This value displays the state of the DECnet Phase 4 to Phase 5 Transition function. Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
       wfOsiDecnetTransPhase4Pkts 1.3.6.1.4.1.18.3.5.6.12.4 counter read-only
Number of successfully translated Phase 4 packets
       wfOsiDecnetTransSegFail 1.3.6.1.4.1.18.3.5.6.12.5 counter read-only
Number of times Phase 5 translation failed because the packet was segmented.
       wfOsiDecnetTransNselFail 1.3.6.1.4.1.18.3.5.6.12.6 counter read-only
Number of times Phase 5 translation failed because the NSELs were not the same.
       wfOsiDecnetTransUnrFail 1.3.6.1.4.1.18.3.5.6.12.7 counter read-only
Number of times Phase 5 failed to find a route to the destination.
       wfOsiDecnetTransNumPhase4Es 1.3.6.1.4.1.18.3.5.6.12.8 counter read-only
Number of Phase 4 ES Adjacencies announced by the Phase 4 (DECnet IV) router.
 wfOsiAreaAddressTable 1.3.6.1.4.1.18.3.5.6.13 no-access
This is the table of Area Addresses for this Router.
       wfOsiAreaAddressEntry 1.3.6.1.4.1.18.3.5.6.13.1 no-access
This is the Area Address Record for this Router.
           wfOsiAreaAddrDelete 1.3.6.1.4.1.18.3.5.6.13.1.1 integer read-write
This is the Create/Delete parameter for this AreaAddr entry. Enumeration: 'deleted': 2, 'created': 1.
           wfOsiAreaAddrDisable 1.3.6.1.4.1.18.3.5.6.13.1.2 integer read-write
Enable/Disable parameter for this AreaAddr. Enumeration: 'disabled': 2, 'enabled': 1.
           wfOsiAreaAddress 1.3.6.1.4.1.18.3.5.6.13.1.3 octet string read-only
This is the prefix area address. It is also the inst_id.
 wfOsiTarpEntry 1.3.6.1.4.1.18.3.5.6.14
       wfOsiTarpCreate 1.3.6.1.4.1.18.3.5.6.14.1 integer read-write
This value determines whether OSI Tarp is configured on this slot. Enumeration: 'deleted': 2, 'created': 1.
       wfOsiTarpEnable 1.3.6.1.4.1.18.3.5.6.14.2 integer read-write
This value dtermines if OSI Tarp is to startup. Enumeration: 'disabled': 2, 'enabled': 1.
       wfOsiTarpState 1.3.6.1.4.1.18.3.5.6.14.3 integer read-only
This value describes the state of OSI Tarp. Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
       wfOsiTarpTID 1.3.6.1.4.1.18.3.5.6.14.4 displaystring read-write
This value contains the Target Identifier assigned to the router (Network Entity).
       wfOsiTarpOriginate 1.3.6.1.4.1.18.3.5.6.14.5 integer read-write
This value determines if TARP is allowed to originate any tarp requests. Enumeration: 'disabled': 2, 'enabled': 1.
       wfOsiTarpLifetime 1.3.6.1.4.1.18.3.5.6.14.6 integer read-write
This value determines what the lifetime of of TARP packets originated by this router will be.
       wfOsiTarpStartSeq 1.3.6.1.4.1.18.3.5.6.14.7 integer read-write
This value determines what the starting sequence number of TARP packets originated by this router will be.
       wfOsiTarpNextSeq 1.3.6.1.4.1.18.3.5.6.14.8 integer read-only
This value determines what the next sequence number of TARP packets originated by this router will be.
       wfOsiTarpTarPro 1.3.6.1.4.1.18.3.5.6.14.9 integer read-write
This value describes what the Protocol Address Type field within the TARP packet must be. A value of 'FE' describes a CLNP address type.
       wfOsiTarpTDC 1.3.6.1.4.1.18.3.5.6.14.10 integer read-write
This value determines whether or not TARP uses and maintains a Tarp Data Cache. Enumeration: 'disabled': 2, 'enabled': 1.
       wfOsiTarpL2TDC 1.3.6.1.4.1.18.3.5.6.14.11 integer read-write
This value determines whether or not TARP uses and maintains a Level 2 Tarp Data Cache. Enumeration: 'disabled': 2, 'enabled': 1.
       wfOsiTarpT1 1.3.6.1.4.1.18.3.5.6.14.12 integer read-write
This value configures the Tarp T1 Timer - how many seconds to wait for a response to a Type1 Request PDU.
       wfOsiTarpT2 1.3.6.1.4.1.18.3.5.6.14.13 integer read-write
This value configures the Tarp T2 Timer - how many seconds to wait for a response to a Type2 Request PDU.
       wfOsiTarpT3 1.3.6.1.4.1.18.3.5.6.14.14 integer read-write
This value configures the Tarp T3 Timer - how many seconds to wait for a response to a Type5 Request PDU.
       wfOsiTarpT4 1.3.6.1.4.1.18.3.5.6.14.15 integer read-write
This value configures the Tarp T4 Timer, which is used during the Error Recovery process after T2 expires.
       wfOsiTarpLDBTimer 1.3.6.1.4.1.18.3.5.6.14.16 integer read-write
This value configures the Loop Detection Buffer's Entry Timer.
       wfOsiTarpLDBFlush 1.3.6.1.4.1.18.3.5.6.14.17 integer read-write
This value configures the timer that signals the flushing of the Loop Detection Buffer.
       wfOsiTarpLDBSize 1.3.6.1.4.1.18.3.5.6.14.18 integer read-write
This value specifies the maximum number of entries the the Loop Detection Buffer can hold.
       wfOsiTarpType1Rcv 1.3.6.1.4.1.18.3.5.6.14.19 counter read-only
This value counts the number of Type 1 Tarp packets received by this interface.
       wfOsiTarpType1Xmt 1.3.6.1.4.1.18.3.5.6.14.20 counter read-only
This value counts the number of Type 1 Tarp packets transmitted by this interface.
       wfOsiTarpType2Rcv 1.3.6.1.4.1.18.3.5.6.14.21 counter read-only
This value counts the number of Type 2 Tarp packets received by this interface.
       wfOsiTarpType2Xmt 1.3.6.1.4.1.18.3.5.6.14.22 counter read-only
This value counts the number of Type 2 Tarp packets transmitted by this interface.
       wfOsiTarpType3Rcv 1.3.6.1.4.1.18.3.5.6.14.23 counter read-only
This value counts the number of Type 3 Tarp packets received by this interface.
       wfOsiTarpType3Xmt 1.3.6.1.4.1.18.3.5.6.14.24 counter read-only
This value counts the number of Type 3 Tarp packets transmitted by this interface.
       wfOsiTarpType4Rcv 1.3.6.1.4.1.18.3.5.6.14.25 counter read-only
This value counts the number of Type 4 Tarp packets received by this interface.
       wfOsiTarpType4Xmt 1.3.6.1.4.1.18.3.5.6.14.26 counter read-only
This value counts the number of Type 4 Tarp packets transmitted by this interface.
       wfOsiTarpType5Rcv 1.3.6.1.4.1.18.3.5.6.14.27 counter read-only
This value counts the number of Type 5 Tarp packets received by this interface.
       wfOsiTarpType5Xmt 1.3.6.1.4.1.18.3.5.6.14.28 counter read-only
This value counts the number of Type 5 Tarp packets transmitted by this interface.
 wfOsiTarpCircuitTable 1.3.6.1.4.1.18.3.5.6.15 no-access
This table contains all of the Tarp interfaces for this system.
       wfOsiTarpCircuitEntry 1.3.6.1.4.1.18.3.5.6.15.1 no-access
This is the Tarp Interface Entry for the Tarp Interface Table.
           wfOsiTarpCircuitCreate 1.3.6.1.4.1.18.3.5.6.15.1.1 integer read-write
This value determines if the Tarp Interface is to be created for this OSI interface. Enumeration: 'deleted': 2, 'created': 1.
           wfOsiTarpCircuitEnable 1.3.6.1.4.1.18.3.5.6.15.1.2 integer read-write
This value determines if the Tarp Interface is to be enabled for this OSI interface. Enumeration: 'disabled': 2, 'enabled': 1.
           wfOsiTarpCircuitState 1.3.6.1.4.1.18.3.5.6.15.1.3 integer read-only
This value reflects the state of the Tarp interface. Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
           wfOsiTarpCircuitCct 1.3.6.1.4.1.18.3.5.6.15.1.4 integer read-only
Circuit number for this Tarp Interface.
           wfOsiTarpCircuitPropagate 1.3.6.1.4.1.18.3.5.6.15.1.5 integer read-write
This value determines if this interface will propagate transit Tarp packets out this interface. Enumeration: 'disabled': 2, 'enabled': 1.
           wfOsiTarpCircuitOriginate 1.3.6.1.4.1.18.3.5.6.15.1.6 integer read-write
This value determines if this interface will send out Tarp packets originated by the router. Enumeration: 'disabled': 2, 'enabled': 1.
           wfOsiTarpCircuitType1Rcv 1.3.6.1.4.1.18.3.5.6.15.1.7 counter read-only
This value counts the number of Type 1 Tarp packets received by this interface.
           wfOsiTarpCircuitType1Xmt 1.3.6.1.4.1.18.3.5.6.15.1.8 counter read-only
This value counts the number of Type 1 Tarp packets transmitted by this interface.
           wfOsiTarpCircuitType2Rcv 1.3.6.1.4.1.18.3.5.6.15.1.9 counter read-only
This value counts the number of Type 2 Tarp packets received by this interface.
           wfOsiTarpCircuitType2Xmt 1.3.6.1.4.1.18.3.5.6.15.1.10 counter read-only
This value counts the number of Type 2 Tarp packets transmitted by this interface.
           wfOsiTarpCircuitType3Rcv 1.3.6.1.4.1.18.3.5.6.15.1.11 counter read-only
This value counts the number of Type 3 Tarp packets received by this interface.
           wfOsiTarpCircuitType3Xmt 1.3.6.1.4.1.18.3.5.6.15.1.12 counter read-only
This value counts the number of Type 3 Tarp packets transmitted by this interface.
           wfOsiTarpCircuitType4Rcv 1.3.6.1.4.1.18.3.5.6.15.1.13 counter read-only
This value counts the number of Type 4 Tarp packets received by this interface.
           wfOsiTarpCircuitType4Xmt 1.3.6.1.4.1.18.3.5.6.15.1.14 counter read-only
This value counts the number of Type 4 Tarp packets transmitted by this interface.
           wfOsiTarpCircuitType5Rcv 1.3.6.1.4.1.18.3.5.6.15.1.15 counter read-only
This value counts the number of Type 5 Tarp packets received by this interface.
           wfOsiTarpCircuitType5Xmt 1.3.6.1.4.1.18.3.5.6.15.1.16 counter read-only
This value counts the number of Type 5 Tarp packets transmitted by this interface.
           wfOsiTarpCircuitNoBufs 1.3.6.1.4.1.18.3.5.6.15.1.17 counter read-only
This value represents the number of times Tarp tried to allocate a buffer but was unable.
 wfOsiTarpLDBTable 1.3.6.1.4.1.18.3.5.6.16 no-access
Table of wfOsiTarpLDBEntry's.
       wfOsiTarpLDBEntry 1.3.6.1.4.1.18.3.5.6.16.1 no-access
Each entry in the Loop Detection Buffer.
           wfOsiTarpLDBCreate 1.3.6.1.4.1.18.3.5.6.16.1.1 integer read-write
Specifies the creation or deletion of the instance. Enumeration: 'deleted': 2, 'created': 1.
           wfOsiTarpLDBNSAP 1.3.6.1.4.1.18.3.5.6.16.1.2 octet string read-only
The NSAP address for this entry.
           wfOsiTarpLDBSequence 1.3.6.1.4.1.18.3.5.6.16.1.3 integer read-only
The sequence number for this LDB entry.
           wfOsiTarpLDBCurrentTimer 1.3.6.1.4.1.18.3.5.6.16.1.4 integer read-write
Current timer for this LDB Entry.
 wfOsiTarpStaticAdjTable 1.3.6.1.4.1.18.3.5.6.17 no-access
Table of wfOsiTarpStaticAdjEntry's.
       wfOsiTarpStaticAdjEntry 1.3.6.1.4.1.18.3.5.6.17.1 no-access
This is the static adjacency record that appears in the adjacency table.
           wfOsiTarpStaticAdjCreate 1.3.6.1.4.1.18.3.5.6.17.1.1 integer read-write
This value determines if this instance should be created or deleted. Enumeration: 'deleted': 2, 'created': 1.
           wfOsiTarpStaticAdjEnable 1.3.6.1.4.1.18.3.5.6.17.1.2 integer read-write
This value determines if the Static Adjacency should be enabled. Enumeration: 'disabled': 2, 'enabled': 1.
           wfOsiTarpStaticAdjNSAP 1.3.6.1.4.1.18.3.5.6.17.1.3 octet string read-only
This specifies the address of the Static Adjacency. It is also the instance ID.
           wfOsiTarpStaticNibbleLength 1.3.6.1.4.1.18.3.5.6.17.1.4 integer read-write
Describes the number of nibbles in the Static NSAP Address.
 wfOsiTarpIgnoreAdjTable 1.3.6.1.4.1.18.3.5.6.18 no-access
This table contains all the adjacency entries that should be ignored.
       wfOsiTarpIgnoreAdjEntry 1.3.6.1.4.1.18.3.5.6.18.1 no-access
This is the ignore static route entry for the wfOsiTarpIgnoreAdj table.
           wfOsiTarpIgnoreAdjCreate 1.3.6.1.4.1.18.3.5.6.18.1.1 integer read-write
Signifies this instance should be created. Enumeration: 'deleted': 2, 'created': 1.
           wfOsiTarpIgnoreAdjEnable 1.3.6.1.4.1.18.3.5.6.18.1.2 integer read-write
This value determines if this instance should be enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
           wfOsiTarpIgnoreAdjNSAP 1.3.6.1.4.1.18.3.5.6.18.1.3 octet string read-only
Identifies the OSI Adjacency that should be ignored.
           wfOsiTarpIgnoreNibbleLength 1.3.6.1.4.1.18.3.5.6.18.1.4 integer read-write
Describes the number of nibbles in the Static NSAP Address for the Ignore Static Route.
 wfOsiGreAdjTable 1.3.6.1.4.1.18.3.5.6.19 no-access
Gre Adjacency Table
       wfOsiGreAdjEntry 1.3.6.1.4.1.18.3.5.6.19.1 no-access
GRE Adjacency Entry
           wfOsiGreAdjDelete 1.3.6.1.4.1.18.3.5.6.19.1.1 integer read-write
Delete/Create parameter. Enumeration: 'deleted': 2, 'created': 1.
           wfOsiGreAdjDisable 1.3.6.1.4.1.18.3.5.6.19.1.2 integer read-write
Enable/Disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
           wfOsiGreAdjTnlNum 1.3.6.1.4.1.18.3.5.6.19.1.3 integer read-only
GRE tunnel number from GRE MIB
           wfOsiGreAdjConnNum 1.3.6.1.4.1.18.3.5.6.19.1.4 integer read-only
GRE remote tunnel connection number from GRE MIB.
           wfOsiGreAdjRemoteISId 1.3.6.1.4.1.18.3.5.6.19.1.5 ipaddress read-write
This is the Physical IP address of the Destination.
           wfOsiGreAdjCircuitId 1.3.6.1.4.1.18.3.5.6.19.1.6 integer read-write
Circuit number on which this link in configured.