Wellfleet-OCX-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET

Home	MIB: Wellfleet-OCX-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
wfOcxConfigTable	1.3.6.1.4.1.18.3.4.24.21		no-access	Ocx Configuration Table
wfOcxConfigEntry	1.3.6.1.4.1.18.3.4.24.21.1		no-access	An entry in the Ocx Configuration table
wfOcxConfigDelete	1.3.6.1.4.1.18.3.4.24.21.1.1	integer	read-write	Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
wfOcxConfigDisable	1.3.6.1.4.1.18.3.4.24.21.1.2	integer	read-write	Create/Delete parameter Enumeration: 'disabled': 2, 'enabled': 1.
wfOcxConfigIndex	1.3.6.1.4.1.18.3.4.24.21.1.3	integer	read-only	Index for this physical Sonet interface.
wfOcxConfigIfIndex	1.3.6.1.4.1.18.3.4.24.21.1.4	integer	read-only	this is value of ifIndex from the Interfaces table of MIB II (RFC 1213).
wfOcxConfigState	1.3.6.1.4.1.18.3.4.24.21.1.5	integer	read-only	State of the OCX Port. Enumeration: 'lof': 4, 'loopback': 7, 'up': 1, 'ais': 5, 'down': 2, 'los': 3, 'notpresent': 20, 'rdi': 6.
wfOcxConfigLineStatus	1.3.6.1.4.1.18.3.4.24.21.1.6	integer	read-only	the status of the OCX Enumeration: 'lof': 4, 'loopback': 128, 'otherfailure': 512, 'noalarm': 1, 'ais': 8, 'los': 2, 'rdi': 16.
wfOcxConfigLastChange	1.3.6.1.4.1.18.3.4.24.21.1.7	timeticks	read-only	The value of sysUpTime at the time the interface entered its current operational state.
wfOcxConfigConnType	1.3.6.1.4.1.18.3.4.24.21.1.8	integer	read-write	This variable describes the Connector Type for this interface. This Mib is used for various types, OC3, OC12, etc... Enumeration: 'oc3': 1, 'oc48': 3, 'oc12': 2.
wfOcxConfigType	1.3.6.1.4.1.18.3.4.24.21.1.9	integer	read-only	This variable identifies whether a SONET or a SDH signal is used across this interface. Enumeration: 'sonet': 1, 'sdh': 2.
wfOcxConfigLineCoding	1.3.6.1.4.1.18.3.4.24.21.1.10	integer	read-write	This variable describes the line coding for this interface. Enumeration: 'b3zs': 2, 'nrz': 4, 'other': 1, 'rz': 5, 'cmi': 3.
wfOcxConfigLineType	1.3.6.1.4.1.18.3.4.24.21.1.11	integer	read-write	This variable describes the line type for this interface. Enumeration: 'longsinglemode': 3, 'shortsinglemode': 2, 'coax': 5, 'utp': 6, 'other': 1, 'multimode': 4.
wfOcxConfigLoopbackConfig	1.3.6.1.4.1.18.3.4.24.21.1.12	integer	read-write	the loopback configuration of the OCX interface Enumeration: 'selfloop': 2, 'noloop': 1, 'lineloop': 3.
wfOcxConfigManagerMethod	1.3.6.1.4.1.18.3.4.24.21.1.13	integer	read-write	This attribute has no affect on the Hardware configuration. This attribute is purely for any Network Management Tool to determine whether it configured the OCX as Fractional or Clear. Enumeration: 'clear': 2, 'frac': 1.
wfOcxConfigApsEnable	1.3.6.1.4.1.18.3.4.24.21.1.14	integer	read-write	This attribute Enables or Disables the APS failover. Enumeration: 'disabled': 2, 'enabled': 1.
wfOcxConfigScrambling	1.3.6.1.4.1.18.3.4.24.21.1.15	integer	read-write	This attribute turns scrambling on or off. Enumeration: 'on': 1, 'off': 2.
wfOcxConfigClkSource	1.3.6.1.4.1.18.3.4.24.21.1.16	integer	read-write	The source of the physical interface clocking signal, either internal or external. Enumeration: 'extrn': 2, 'intrn': 1.