Wellfleet-E1-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-E1-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfE1Table 1.3.6.1.4.1.18.3.4.11 no-access
E1 line record
       wfE1Entry 1.3.6.1.4.1.18.3.4.11.1 no-access
An entry in the E1 table
           wfE1Delete 1.3.6.1.4.1.18.3.4.11.1.1 integer read-write
create/delete parameter, dflt = created Enumeration: 'deleted': 2, 'created': 1.
           wfE1Disable 1.3.6.1.4.1.18.3.4.11.1.2 integer read-write
enable/disable parameter, dflt = enabled Enumeration: 'disabled': 2, 'enabled': 1.
           wfE1State 1.3.6.1.4.1.18.3.4.11.1.3 integer read-only
line driver state variable, Not Present, Init, Up Enumeration: 'notpresent': 4, 'init': 3, 'up': 1.
           wfE1Slot 1.3.6.1.4.1.18.3.4.11.1.4 integer read-only
instance ID Slot, filled in by driver
           wfE1Connector 1.3.6.1.4.1.18.3.4.11.1.5 integer read-only
instance ID Connector, filled in by driver Enumeration: 'two': 2, 'one': 1.
           wfE1Madr 1.3.6.1.4.1.18.3.4.11.1.6 octet string read-only
Line mac address, filled in by driver
           wfE1HDB3Support 1.3.6.1.4.1.18.3.4.11.1.7 integer read-write
HDB3 Support - Enables or disables high density bipolar coding Enumeration: 'disabled': 2, 'enabled': 1.
           wfE1ClockMode 1.3.6.1.4.1.18.3.4.11.1.8 integer read-write
Clock Mode - Specifies the source of the E1 transmit clock Enumeration: 'manual': 4, 'internal': 1, 'slave': 2.
           wfE1MiniDacs 1.3.6.1.4.1.18.3.4.11.1.9 displaystring read-write
MiniDacs Configuration - assigns each E1 channel to a specific function
           wfE1BipolarVios 1.3.6.1.4.1.18.3.4.11.1.10 counter read-only
Number of Bipolar Violations
           wfE1FrameErrs 1.3.6.1.4.1.18.3.4.11.1.11 counter read-only
Number of Frame errors
           wfE1RcvRemAlms 1.3.6.1.4.1.18.3.4.11.1.12 counter read-only
Number of remote alarms received
           wfE1RcvMfmAlms 1.3.6.1.4.1.18.3.4.11.1.13 counter read-only
Number of Multiframe Alarms Received
           wfE1MfsErrs 1.3.6.1.4.1.18.3.4.11.1.14 counter read-only
Number of instances of CAS Multiframe resync criteria met
           wfE1SyncLoss 1.3.6.1.4.1.18.3.4.11.1.15 counter read-only
Number of instances of sync loss
           wfE1RcvSig1s 1.3.6.1.4.1.18.3.4.11.1.16 counter read-only
Number of instances of receive signalling all 1's
           wfE1RcvUnfrm1s 1.3.6.1.4.1.18.3.4.11.1.17 counter read-only
Number of instances of Receive unframed all 1's
           wfE1LineType 1.3.6.1.4.1.18.3.4.11.1.18 integer read-write
Enable/Disable CRC-4 Enumeration: 'e1crc4': 2, 'e1': 1.
           wfE1CRC4Errors 1.3.6.1.4.1.18.3.4.11.1.19 counter read-only
Count of CRC-4 Errors