Wellfleet-DVMRP-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-DVMRP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfDvmrpBase 1.3.6.1.4.1.18.3.5.3.12.1
     wfDvmrpBaseCreate 1.3.6.1.4.1.18.3.5.3.12.1.1 integer read-write
This entry will provide the base configuration for the DVMRP multicast support on the router. Enumeration: 'deleted': 2, 'created': 1.
     wfDvmrpBaseEnable 1.3.6.1.4.1.18.3.5.3.12.1.2 integer read-write
Enable or disable DVMRP support in router Enumeration: 'disabled': 2, 'enabled': 1.
     wfDvmrpBaseState 1.3.6.1.4.1.18.3.5.3.12.1.3 integer read-only
State of DVMRP base module Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpres': 4.
     wfDvmrpBaseFullUpdateInterval 1.3.6.1.4.1.18.3.5.3.12.1.4 integer read-write
Full update interval. This value specifies, in seconds, how often routing messages containing complete routing tables are sent.
     wfDvmrpBaseTriggeredUpdateInterval 1.3.6.1.4.1.18.3.5.3.12.1.5 integer read-write
Triggered update interval. This value specifies, in seconds, how often triggered routing messages are sent; this represents the minimum amount of time between these type of messages. Triggered updates are sent between full update; the timers restart when a full update is sent so this value should be less than the full update rate.
     wfDvmrpBaseLeafTimeout 1.3.6.1.4.1.18.3.5.3.12.1.6 integer read-write
Leaf timeout. This value specifies, in seconds, the virtual interface hold down timer.
     wfDvmrpBaseNeighborTimeout 1.3.6.1.4.1.18.3.5.3.12.1.7 integer read-write
Neighbor timeout. This value specifies, in seconds, how long a router neighbor is considered 'up' without confirmation.
     wfDvmrpBaseRouteExpirationTimeout 1.3.6.1.4.1.18.3.5.3.12.1.8 integer read-write
Route Expiration timeout. This value specifies, in seconds, how long a route is considered valid without confirmation; this represents the duration of time that this route will be used.
     wfDvmrpBaseGarbageTimeout 1.3.6.1.4.1.18.3.5.3.12.1.9 integer read-write
Garbage timeout. This value specifies, in seconds, how long a route exists without confirmation; this represents the duration of time that this route will be included in routing updates. This value must be greater than the route expiration timeout.
     wfDvmrpBaseEstimatedRoutes 1.3.6.1.4.1.18.3.5.3.12.1.10 integer read-write
Estimated number of routes, per slot. This is used for pre-allocating routing tables. Note that routes are kept on a per-source network basis, independent of multicast group. This number must include a route for every local network that has a CCT configured for multicasting.
     wfDvmrpBaseNeighborProbeInterval 1.3.6.1.4.1.18.3.5.3.12.1.11 integer read-write
Neighbor probe interval: how often to send a probe on VIFs
     wfDvmrpBaseRouteSwitchTimeout 1.3.6.1.4.1.18.3.5.3.12.1.12 integer read-write
Route switch timeout. How long to wait, without receiving a subsequent route update from the original neighbor, before switching to a different neighbor.
     wfDvmrpBaseActualRoutes 1.3.6.1.4.1.18.3.5.3.12.1.13 integer read-only
Count of number of entries currently in route table
     wfDvmrpBaseDebugLevel 1.3.6.1.4.1.18.3.5.3.12.1.14 gauge read-write
Turn DVMRP log ON or OFF for DVMRP debuging messages The levels are: NO_DISPLAY_LOG 0x0001 - Reserved ROUTE_UPDATE_LOG 0x0002 - Displays all routing table events CACHE_ADD_LOG 0x0004 - Displays events relating to addition of cache entry by the cache gate CACHE_DELETE_LOG 0x0008 - Displays all events relating to deletion of cache entry CACHE_CHANGE_LOG 0x0010 - Displays all events relating to updates of cache entries CACHE_DATA_LOG 0x0020 - obsolete PRUNE_MSG_LOG 0x0040 - Display router received pruning related messages, including prunes, grafts, graft_acks, and neighbor reset PRUNE_XMIT_LOG 0x0080 - Display a messaged when a initial prune state is established for a (src, group). IGMP_COM_LOG 0x0100 - Display communication events between IGMP and DVMRP, events including some hosts joining a group, and all hosts leaving a group. DVMRP_XMIT_LOG 0x0200 - Display transmission events by the router, e.g, prune, grafts... CACHE_NO_GH_LOG 0x0400 - Display buffer forwarding to non-existing main or remote cache gate. CACHE_DBG_LOG 0x0800 - Display general debugging messaages MEM_DBG_LOG 0x1000 - Display dvmrp memory usage activities INTEROP_DBG_LOG 0x2000 - Display dvmrp mospf debug CACHE_BASE_ADD_LOG 0x4000 - Obsolete CACHE_VIF_ADD_LOG 0x8000 - Obsolete CACHE_BASE_DELETE_LOG 0x10000 - Obsolete CACHE_VIF_DELETE_LOG 0x20000 - Obsolete MTRACE_UPDATE_LOG 0x40000 - Displays mtrace update info NEIGHBOR_UPDATE_LOG 0x80000 - Display events relating to addition, deletion and update of neighbor's info MTM_INTERFACE_LOG 0x100000 - Display events relating to MTM-DVMRP interface, events as MTM inbound, outbound interact with DVMRP and entries deletion/addition. ROUTE_ADD_LOG 0x200000 - ROUTE_DEL_LOG 0x400000 - REMOTE_CACHE_ADD_LOG 0x800000 - Display addition event for the outgoing interface of (source, group) cache entry REMOTE_CACHE_DELETE_LOG 0x1000000 - Display deletion event for the outgoing interface of (source, group) cache entry RX_CONFLICT_ROUTE_INFO_LOG 0x2000000 - Display received conflict route information
     wfDvmrpBasePruningEnable 1.3.6.1.4.1.18.3.5.3.12.1.15 integer read-write
Enable or Disable Pruning functionality at the Base level Enumeration: 'disabled': 2, 'enabled': 1.
     wfDvmrpBaseFragmentMtuThreshold 1.3.6.1.4.1.18.3.5.3.12.1.16 integer read-write
the default value is the CSMACD_MTU, and the MINiMUN is X25_DDN_MTU. Both are taken from dp.h
     wfDvmrpBaseMaxRoutes 1.3.6.1.4.1.18.3.5.3.12.1.17 integer read-write
Max number of routes, per slot. This is used to limit the size of routing tables. Note that routes are kept on a per-source network basis, independent of multicast group. This number must include a route for every local network that has a CCT configured for multicasting.
     wfDvmrpBasePolicyEnable 1.3.6.1.4.1.18.3.5.3.12.1.18 integer read-write
Enable or Disable route policy functionality at the Base level Enumeration: 'disabled': 2, 'enabled': 1.
     wfDvmrpBaseHolddownEnable 1.3.6.1.4.1.18.3.5.3.12.1.19 integer read-write
Enable or Disable holddown of deleted routes. Enumeration: 'disabled': 2, 'enabled': 1.
 wfDvmrpCircuitEntryTable 1.3.6.1.4.1.18.3.5.3.12.2 no-access
Circuit virtual interfaces (aka physical VIFs)
     wfDvmrpCircuitEntry 1.3.6.1.4.1.18.3.5.3.12.2.1 no-access
One instance of this object exists for every CCT that supports this feature. The instance ID for this object will be the circuit number.
         wfDvmrpCircuitCreate 1.3.6.1.4.1.18.3.5.3.12.2.1.1 integer read-write
Create or delete Enumeration: 'deleted': 2, 'created': 1.
         wfDvmrpCircuitEnable 1.3.6.1.4.1.18.3.5.3.12.2.1.2 integer read-write
Enable or disable DVMRP on this circuit Enumeration: 'disabled': 2, 'enabled': 1.
         wfDvmrpCircuitState 1.3.6.1.4.1.18.3.5.3.12.2.1.3 integer read-only
The current state of the DVMRP interface. Invalid indicates an error in processing the configuration record. Enumeration: 'down': 2, 'notpres': 5, 'init': 3, 'up': 1, 'invalid': 4.
         wfDvmrpCircuitCCT 1.3.6.1.4.1.18.3.5.3.12.2.1.4 integer read-only
This circuit number.
         wfDvmrpCircuitRouteEnable 1.3.6.1.4.1.18.3.5.3.12.2.1.5 integer read-write
Enable/disble this circuit for routing. If enabled, this circuit will be used to propogate routing information, information about this circuit will be incorporated into routing updates, and multicast datagrams will be forwarded 'in native mode' (e.g. as multicast datagrams) via this circuit. If disabled, this circuit exists only to support unicast tunnels; in this case, all other paramters are ignored. Enumeration: 'disabled': 2, 'enabled': 1.
         wfDvmrpCircuitMetric 1.3.6.1.4.1.18.3.5.3.12.2.1.6 integer read-write
Metric. This value represents the cost of this interface; the cost of using this hop. This value must be smaller than the route infinity value
         wfDvmrpCircuitRouteThreshold 1.3.6.1.4.1.18.3.5.3.12.2.1.7 integer read-write
Threshold. This value can be used to filter out datagrams that are being forwarded to a neighboring router; if the IP TTL is not >= the threshold, the datagram is dropped by this router
         wfDvmrpCircuitInPkts 1.3.6.1.4.1.18.3.5.3.12.2.1.8 counter read-only
Number of datagrams received on this interface
         wfDvmrpCircuitOutPkts 1.3.6.1.4.1.18.3.5.3.12.2.1.9 counter read-only
Number of datagrams send on this interface
         wfDvmrpCircuitInRouteUpdates 1.3.6.1.4.1.18.3.5.3.12.2.1.10 counter read-only
Number of DVMRP route update messages received
         wfDvmrpCircuitOutRouteUpdates 1.3.6.1.4.1.18.3.5.3.12.2.1.11 counter read-only
Number of DVMRP route update messages sent
         wfDvmrpCircuitInPktDiscards 1.3.6.1.4.1.18.3.5.3.12.2.1.12 counter read-only
Number of inbound datagrams discarded due to route not found
         wfDvmrpCircuitOutPktDiscards 1.3.6.1.4.1.18.3.5.3.12.2.1.13 counter read-only
Number of outbound datagrams discarded due to route not found
         wfDvmrpCircuitFwdCacheSize 1.3.6.1.4.1.18.3.5.3.12.2.1.14 integer read-write
Maximum number of entries allowed in the Forwarding table at one time. there is a Forwarding table per vif
         wfDvmrpCircuitFwdCacheTTL 1.3.6.1.4.1.18.3.5.3.12.2.1.15 integer read-write
The time_to_live for the Forwarding table entries in seconds .
         wfDvmrpCircuitAdvertiseSelf 1.3.6.1.4.1.18.3.5.3.12.2.1.16 integer read-write
If enabled the router will advertise itself as one of the source net. If not enabled the router will not advertise itself as one of the source net. Enumeration: 'disabled': 2, 'enabled': 1.
         wfDvmrpCircuitFwdCacheEntries 1.3.6.1.4.1.18.3.5.3.12.2.1.17 integer read-only
The most up to date number of entries in the forwarding cache
         wfDvmrpCircuitInPrunePkts 1.3.6.1.4.1.18.3.5.3.12.2.1.18 counter read-only
Number of PRUNE datagrams received on this interface
         wfDvmrpCircuitOutPrunePkts 1.3.6.1.4.1.18.3.5.3.12.2.1.19 counter read-only
Number of PRUNE datagrams send on this interface
         wfDvmrpCircuitInGraftPkts 1.3.6.1.4.1.18.3.5.3.12.2.1.20 counter read-only
Number of GRAFT datagrams received on this interface
         wfDvmrpCircuitOutGraftPkts 1.3.6.1.4.1.18.3.5.3.12.2.1.21 counter read-only
Number of GRAFT datagrams send on this interface
         wfDvmrpCircuitInGraftAckPkts 1.3.6.1.4.1.18.3.5.3.12.2.1.22 counter read-only
Number of GRAFT_ACK datagrams received on this interface
         wfDvmrpCircuitOutGraftAckPkts 1.3.6.1.4.1.18.3.5.3.12.2.1.23 counter read-only
Number of GRAFT_ACK datagrams send on this interface
         wfDvmrpCircuitDefaultRouteSupply 1.3.6.1.4.1.18.3.5.3.12.2.1.24 integer read-write
enabled : Send the default route, 0.0.0.0 if learned, form this interface. disabled: no default route is sent from this interface. generate: generate default route, 0.0.0.0 from this interface. Enumeration: 'disabled': 2, 'enabled': 1, 'generate': 3.
         wfDvmrpCircuitDefaultRouteListen 1.3.6.1.4.1.18.3.5.3.12.2.1.25 integer read-write
Receive the default route, 0.0.0.0 on this interface Enumeration: 'disabled': 2, 'enabled': 1.
         wfDvmrpCircuitReportDependProbe 1.3.6.1.4.1.18.3.5.3.12.2.1.26 integer read-write
This is to control accepting the route report. According to the protocol, dvmrp should send probe packet before sending the route report packet to the neighbors. But some vendor implementation did not send probes before sending reports. Enable: only process the routes from the neighbor sending probes. Disable: No Dependency (no restriction). Enumeration: 'disabled': 2, 'enabled': 1.
         wfDvmrpCircuitPruneLifeTime 1.3.6.1.4.1.18.3.5.3.12.2.1.27 integer read-write
The life time of the prune message the router sends to its neighbor in seconds.
         wfDvmrpCircuitAcceptAggregateRoutes 1.3.6.1.4.1.18.3.5.3.12.2.1.28 integer read-only
Count of number of routes received have been aggregated to the specific aggregate route currently in route table for this interface.
         wfDvmrpCircuitAnnounceAggregatedRoutes 1.3.6.1.4.1.18.3.5.3.12.2.1.29 integer read-only
Count of number of routes have been aggregated to the specific aggregate route for advertisement currently in route table for this interface.
 wfDvmrpTunnelEntryTable 1.3.6.1.4.1.18.3.5.3.12.3 no-access
Tunnel virtual interfaces
     wfDvmrpTunnelEntry 1.3.6.1.4.1.18.3.5.3.12.3.1 no-access
This object is used to specify the set of 'multicast tunnels', unicast pipes that are used to send IP multicast datagrams to remote network multicast routers via intermediate routers that may not support this style of IP multicasting. One instance of this object exists for every separate tunnel destination. The instance identifier is the IP address of the remote router neighbor and the local circuit number.
         wfDvmrpTunnelCreate 1.3.6.1.4.1.18.3.5.3.12.3.1.1 integer read-write
create/delete Enumeration: 'deleted': 2, 'created': 1.
         wfDvmrpTunnelEnable 1.3.6.1.4.1.18.3.5.3.12.3.1.2 integer read-write
enable/disable this tunnel interface Enumeration: 'disabled': 2, 'enabled': 1.
         wfDvmrpTunnelState 1.3.6.1.4.1.18.3.5.3.12.3.1.3 integer read-only
The current state of the DVMRP tunnel interface. Invalid indicates an error in processing the configuration record. Enumeration: 'down': 2, 'notpres': 5, 'init': 3, 'up': 1, 'invalid': 4.
         wfDvmrpTunnelCCT 1.3.6.1.4.1.18.3.5.3.12.3.1.4 integer read-only
The multicast circuit associated with this tunnel.
         wfDvmrpTunnelRemoteRouterIpAddress 1.3.6.1.4.1.18.3.5.3.12.3.1.5 ipaddress read-only
(unicast) IP address of remote network router neighbor.
         wfDvmrpTunnelEncapsMode 1.3.6.1.4.1.18.3.5.3.12.3.1.6 integer read-write
Will these tunnelled datagrams be encapsulated within an IP datagram, or will they be loosely encapsulated using the LSSR option (for the latter, refer to RFC 1075; this is needed for backward compatibility) Enumeration: 'ip-in-ip': 1, 'lssr': 2.
         wfDvmrpTunnelMetric 1.3.6.1.4.1.18.3.5.3.12.3.1.7 integer read-write
Cost of using this tunnel
         wfDvmrpTunnelThreshold 1.3.6.1.4.1.18.3.5.3.12.3.1.8 integer read-write
Threshold for forwarding through this tunnel; if TTL < threshold, the datagram is dropped.
         wfDvmrpTunnelInPkts 1.3.6.1.4.1.18.3.5.3.12.3.1.9 counter read-only
Number of datagrams received on this interface
         wfDvmrpTunnelOutPkts 1.3.6.1.4.1.18.3.5.3.12.3.1.10 counter read-only
Number of datagrams send on this interface
         wfDvmrpTunnelInRouteUpdates 1.3.6.1.4.1.18.3.5.3.12.3.1.11 counter read-only
Number of DVMRP route update messages received
         wfDvmrpTunnelOutRouteUpdates 1.3.6.1.4.1.18.3.5.3.12.3.1.12 counter read-only
Number of DVMRP route update messages sent
         wfDvmrpTunnelInPktDiscards 1.3.6.1.4.1.18.3.5.3.12.3.1.13 counter read-only
Number of inbound datagrams discarded due to route not found or due to invalid inner address (dest address != multicast)
         wfDvmrpTunnelOutPktDiscards 1.3.6.1.4.1.18.3.5.3.12.3.1.14 counter read-only
Number of outbound datagrams discarded due to route not found
         wfDvmrpTunnelLocalRouterIpAddress 1.3.6.1.4.1.18.3.5.3.12.3.1.15 ipaddress read-only
(unicast) IP address of local network router. To support multinet.
         wfDvmrpTunnelFwdCacheSize 1.3.6.1.4.1.18.3.5.3.12.3.1.16 integer read-write
Maximum number of entries allowed in the Forwarding table at one time. there is a Forwarding table per vif
         wfDvmrpTunnelFwdCacheTTL 1.3.6.1.4.1.18.3.5.3.12.3.1.17 integer read-write
The time_to_live for the Forwarding table entries in seconds .
         wfDvmrpTunnelFwdCacheEntries 1.3.6.1.4.1.18.3.5.3.12.3.1.18 integer read-only
The most up to date number of entries in the forwarding cache
         wfDvmrpTunnelInPrunePkts 1.3.6.1.4.1.18.3.5.3.12.3.1.19 counter read-only
Number of PRUNE datagrams received on this interface
         wfDvmrpTunnelOutPrunePkts 1.3.6.1.4.1.18.3.5.3.12.3.1.20 counter read-only
Number of PRUNE datagrams send on this interface
         wfDvmrpTunnelInGraftPkts 1.3.6.1.4.1.18.3.5.3.12.3.1.21 counter read-only
Number of GRAFT datagrams received on this interface
         wfDvmrpTunnelOutGraftPkts 1.3.6.1.4.1.18.3.5.3.12.3.1.22 counter read-only
Number of GRAFT datagrams send on this interface
         wfDvmrpTunnelInGraftAckPkts 1.3.6.1.4.1.18.3.5.3.12.3.1.23 counter read-only
Number of GRAFT_ACK datagrams received on this interface
         wfDvmrpTunnelOutGraftAckPkts 1.3.6.1.4.1.18.3.5.3.12.3.1.24 counter read-only
Number of GRAFT_ACK datagrams send on this interface
         wfDvmrpTunnelDefaultRouteSupply 1.3.6.1.4.1.18.3.5.3.12.3.1.25 integer read-write
Send the default route, 0.0.0.0 on this interface Enumeration: 'disabled': 2, 'enabled': 1, 'generate': 3.
         wfDvmrpTunnelDefaultRouteListen 1.3.6.1.4.1.18.3.5.3.12.3.1.26 integer read-write
Receive the default route, 0.0.0.0 on this interface Enumeration: 'disabled': 2, 'enabled': 1.
         wfDvmrpTunnelCtrlMsgMode 1.3.6.1.4.1.18.3.5.3.12.3.1.27 integer read-write
Dvmrp tunneling control messages encapsulated type. noencaps is the mode that control messages are sent in regular igmp packets with ip protocol type set to IP_PROTOCOL_IGMP. encaps is the mode that control messages are encapsed inside ip packets with ip protocol type set to IP_PROTOCOL_IPINIP. All DVMRP messages sent across tunnels will be encapsulated in the same way as data packets in this mode. Enumeration: 'ip-in-ip': 2, 'native': 1.
         wfDvmrpTunnelReportDependProbe 1.3.6.1.4.1.18.3.5.3.12.3.1.28 integer read-write
This is to control accepting the route report. According to the protocol, dvmrp should send probe packet before sending the route report packet to the neighbors. But some vendor implementations do not send probes before sending reports. Enable: only process the routes from the neighbor sending probes. Disable: No Dependency (no restriction). Enumeration: 'disabled': 2, 'enabled': 1.
         wfDvmrpTunnelPruneLifeTime 1.3.6.1.4.1.18.3.5.3.12.3.1.29 integer read-write
The life time of the prune message the router send to its neighbor in seconds.
         wfDvmrpTunnelAcceptAggregateRoutes 1.3.6.1.4.1.18.3.5.3.12.3.1.30 integer read-only
Count of number of routes received have been aggregated to the specific aggregate route currently in route table for this interface.
         wfDvmrpTunnelAnnounceAggregatedRoutes 1.3.6.1.4.1.18.3.5.3.12.3.1.31 integer read-only
Count of number of routes have been aggregated to the specific aggregate route for advertisement currently in route table for this interface.
 wfDvmrpRouteEntryTable 1.3.6.1.4.1.18.3.5.3.12.4 no-access
MIB proxy: main DVMRP routing table
     wfDvmrpRouteEntry 1.3.6.1.4.1.18.3.5.3.12.4.1 no-access
Supported by mib proxy. One entry exists for each active route.
         wfDvmrpRouteSourceNetwork 1.3.6.1.4.1.18.3.5.3.12.4.1.1 ipaddress read-only
A source of multicast datagrams
         wfDvmrpRouteSourceMask 1.3.6.1.4.1.18.3.5.3.12.4.1.2 ipaddress read-only
Mask for the specified source network
         wfDvmrpRouteNextHopRouter 1.3.6.1.4.1.18.3.5.3.12.4.1.3 ipaddress read-only
Next hop multicast router to the specified source network; we consider this neighboring router to be on the shortest path to the source. Note that this neighboring router may be a tunnel endpoint.
         wfDvmrpRouteNextHopInterfaceCCT 1.3.6.1.4.1.18.3.5.3.12.4.1.4 integer read-only
Next hop interface (CCT) to the specified source router; we consider this interface to be on the shortest path to the source.
         wfDvmrpRouteNextHopInterfaceTunnelId 1.3.6.1.4.1.18.3.5.3.12.4.1.5 ipaddress read-only
Next hop interface (tunnel id) to the specified source router; we consider this interface to be on the shortest path to the source.
         wfDvmrpRouteNextHopInterfaceLocalTunnelId 1.3.6.1.4.1.18.3.5.3.12.4.1.6 ipaddress read-only
Next hop interface (local tunnel id) to the specified source router; we consider this interface to be on the shortest path to the source.
         wfDvmrpRouteTimer 1.3.6.1.4.1.18.3.5.3.12.4.1.7 integer read-only
route timer
         wfDvmrpRouteState 1.3.6.1.4.1.18.3.5.3.12.4.1.8 integer read-only
Set of flags indicating state of entry. Note that the router uses this field as a bit mask. 0x8000 Network is local to this router 0x4000 Route is being timed 0x2000 Route is garbaged
         wfDvmrpRouteMetric 1.3.6.1.4.1.18.3.5.3.12.4.1.9 integer read-only
current route metric
         wfDvmrpRouteProtocol 1.3.6.1.4.1.18.3.5.3.12.4.1.10 integer read-only
current route protocol dvmrp (2) or mospf (4) or internal (6) which is the route from unicast and incoming interface no i dvmrp configure, if dvmrp is configured then the protocol will be set to 2, see wfIgmpRoutingProtocol
         wfDvmrpRouteType 1.3.6.1.4.1.18.3.5.3.12.4.1.11 integer read-only
The orginal route source from. If it is from pure dvmrp route (0x0001) unicast best route (0x0002) unciast route but has dvmrp interface (0x0003) ospf(0x0004) ospf best route (0x0006) ospf ase route (0x0008)
         wfDvmrpRouteAggregatedType 1.3.6.1.4.1.18.3.5.3.12.4.1.12 integer read-only
Route Aggregated types : 0 - normal route 1 - inbound aggregated route 2 - outbound aggregated route 4 - inbound aggregate route 8 - outbound aggregate route
 wfDvmrpRouteInterfaceEntryTable 1.3.6.1.4.1.18.3.5.3.12.5 no-access
MIB proxy: DVMRP VIF routing table
     wfDvmrpRouteInterfaceEntry 1.3.6.1.4.1.18.3.5.3.12.5.1 no-access
Supported by mib proxy. One entry exists for each virtual interface on an active route. It is associated with a route via the source network/ net mask fields. The instance ID includes tunnel ID, which is 0 for non-tunnel interfaces.
         wfDvmrpRouteInterfaceSourceNetwork 1.3.6.1.4.1.18.3.5.3.12.5.1.1 ipaddress read-only
A source of multicast datagrams
         wfDvmrpRouteInterfaceSourceMask 1.3.6.1.4.1.18.3.5.3.12.5.1.2 ipaddress read-only
Mask for the specified source network
         wfDvmrpRouteInterfaceNextHopInterfaceCCT 1.3.6.1.4.1.18.3.5.3.12.5.1.3 integer read-only
circuit number with which this route is associated
         wfDvmrpRouteInterfaceNextHopInterfaceLocalTunnelId 1.3.6.1.4.1.18.3.5.3.12.5.1.4 ipaddress read-only
Tunnel ID for tunnelled interfaces. This value is zero for non-tunnelled interfaces, otherwise it contains the local IP address of the tunnel.
         wfDvmrpRouteInterfaceNextHopInterfaceTunnelId 1.3.6.1.4.1.18.3.5.3.12.5.1.5 ipaddress read-only
Tunnel ID for tunnelled interfaces. This value is zero for non-tunnelled interfaces, otherwise it contains the remote IP address of the tunnel.
         wfDvmrpRouteInterfaceState 1.3.6.1.4.1.18.3.5.3.12.5.1.6 integer read-only
state of interface for this route. Note that the router uses this field as a bit mask. 0x8000 - interface is leaf 0x4000 - interface is child 0x2000 - interface is in hold-down state 0x1000 - interface has loop neighbor for this route
         wfDvmrpRouteInterfaceDominantRouter 1.3.6.1.4.1.18.3.5.3.12.5.1.7 ipaddress read-only
dominant router address for virtual interface
         wfDvmrpRouteInterfaceSubordinateRouter 1.3.6.1.4.1.18.3.5.3.12.5.1.8 ipaddress read-only
subordinate router address for virtual interface
         wfDvmrpRouteInterfaceHoldDownTimer 1.3.6.1.4.1.18.3.5.3.12.5.1.9 integer read-only
Current value of hold down timer, used to determine if interface is for leaf or non-leaf network. Non-leaf network means that a local network router considers us to be in the shortest path to the source (they have sent us a route update with metric >= infinity).
         wfDvmrpRouteInterfaceSPInDiscards 1.3.6.1.4.1.18.3.5.3.12.5.1.10 counter read-only
Count of inbound packets discarded because interface not on shortest path
         wfDvmrpRouteInterfaceSPOutDiscards 1.3.6.1.4.1.18.3.5.3.12.5.1.11 counter read-only
Count of outbound packets discarded because interface not on shortest path
         wfDvmrpRouteInterfaceThresholdOutDiscards 1.3.6.1.4.1.18.3.5.3.12.5.1.12 counter read-only
Count of outbound packets discarded because of threshold
         wfDvmrpRouteInterfaceInSuccessfulPkts 1.3.6.1.4.1.18.3.5.3.12.5.1.13 counter read-only
Count of inbound packets accepted for forwarding
         wfDvmrpRouteInterfaceOutSuccessfulPkts 1.3.6.1.4.1.18.3.5.3.12.5.1.14 counter read-only
Count of outbound packets accepted for forwarding
         wfDvmrpRouteInterfaceParentCCT 1.3.6.1.4.1.18.3.5.3.12.5.1.15 integer read-only
circuit number with which this route is associated;parent VIF
         wfDvmrpRouteInterfaceParentLocalTunnelId 1.3.6.1.4.1.18.3.5.3.12.5.1.16 ipaddress read-only
Tunnel ID for tunnelled interfaces. This value is zero for non-tunnelled interfaces, otherwise it contains the local IP address of the tunnel; parent VIF.
         wfDvmrpRouteInterfaceParentTunnelId 1.3.6.1.4.1.18.3.5.3.12.5.1.17 ipaddress read-only
Tunnel ID for tunnelled interfaces. This value is zero for non-tunnelled interfaces, otherwise it contains the remote IP address of the tunnel; parent VIF.
 wfDvmrpNeighboringRouterEntryTable 1.3.6.1.4.1.18.3.5.3.12.6 no-access
MIB proxy: DVMRP neighbor table
     wfDvmrpNeighboringRouterEntry 1.3.6.1.4.1.18.3.5.3.12.6.1 no-access
This entry is used to indentify the known neighboring routers for a circuit. This object will be indentified by circuit number, tunnel id (to identify local interface), and the IP address of the neighbor.
         wfDvmrpNeighboringRouterCCT 1.3.6.1.4.1.18.3.5.3.12.6.1.1 integer read-only
Local circuit number
         wfDvmrpNeighboringRouterLocalTunnelId 1.3.6.1.4.1.18.3.5.3.12.6.1.2 ipaddress read-only
Tunnel Id for interface. This value is zero for non- tunnelled interfaces, otherwise it contains the IP address of the local tunnel endpoint.
         wfDvmrpNeighboringRouterTunnelId 1.3.6.1.4.1.18.3.5.3.12.6.1.3 ipaddress read-only
Tunnel Id for interface. This value is zero for non- tunnelled interfaces, otherwise it contains the IP address of the remote tunnel endpoint.
         wfDvmrpNeighboringRouterIpAddr 1.3.6.1.4.1.18.3.5.3.12.6.1.4 ipaddress read-only
IP address of neighboring router
         wfDvmrpNeighboringRouterState 1.3.6.1.4.1.18.3.5.3.12.6.1.5 integer read-only
State of neighbor. The router uses this as a bit mask. 0x8000 - Neighbor is being timed
         wfDvmrpNeighboringRouterTimer 1.3.6.1.4.1.18.3.5.3.12.6.1.6 integer read-only
Current value of neighbor timer
         wfDvmrpNeighboringRouterGenId 1.3.6.1.4.1.18.3.5.3.12.6.1.7 integer read-only
The neighboring router's generation identifier.
         wfDvmrpNeighboringRouterMajorVersion 1.3.6.1.4.1.18.3.5.3.12.6.1.8 integer read-only
The neighboring router's major DVMRP version number.
         wfDvmrpNeighboringRouterMinorVersion 1.3.6.1.4.1.18.3.5.3.12.6.1.9 integer read-only
The neighboring router's minor DVMRP version number.
         wfDvmrpNeighboringRouterCapabilities 1.3.6.1.4.1.18.3.5.3.12.6.1.10 integer read-only
This object describes the neighboring router's capabilities. The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests.