Wellfleet-ASR-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-ASR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfAsrBase 1.3.6.1.4.1.18.3.5.9.11.1
     wfAsrBaseCreate 1.3.6.1.4.1.18.3.5.9.11.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete ASR. Enumeration: 'deleted': 2, 'created': 1.
     wfAsrBaseEnable 1.3.6.1.4.1.18.3.5.9.11.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable ASR. Enumeration: 'disabled': 2, 'enabled': 1.
     wfAsrBaseState 1.3.6.1.4.1.18.3.5.9.11.1.3 integer read-only
The current state of the entire ASR. Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpres': 4.
     wfAsrNextHopRetryLimit 1.3.6.1.4.1.18.3.5.9.11.1.4 integer read-write
Set the number of next hop entries to try to establish the SVC should the first next hop entry fail.
     wfAsrSecureInFilter 1.3.6.1.4.1.18.3.5.9.11.1.5 integer read-write
Enable or disable inbound packet filtering. This object will be implemented as part of the follow on project. Enumeration: 'enable': 1, 'disable': 2.
     wfAsrSecureInValid 1.3.6.1.4.1.18.3.5.9.11.1.6 integer read-write
Enable or disable inbound call validation. This object will be implemented as part of a follow on project. Enumeration: 'enable': 1, 'disable': 2.
     wfAsrHoldDownTimer 1.3.6.1.4.1.18.3.5.9.11.1.7 integer read-write
The hold down timer is used to prevent retries to a destination that the SVC setup process has failed on. This value would be used if filter/flow spec information is not returned from NHS.
     wfAsrActiveSvcs 1.3.6.1.4.1.18.3.5.9.11.1.8 counter read-only
A count of the SVCs currently active on this router slot.
     wfAsrFwdTblEntries 1.3.6.1.4.1.18.3.5.9.11.1.9 counter read-only
A count of entries in the ASR forward table.
     wfAsrFwdTblSeq 1.3.6.1.4.1.18.3.5.9.11.1.10 counter read-only
Sequence number used to determine changes to the ASR forward table.
     wfAsrDnsProxyPort 1.3.6.1.4.1.18.3.5.9.11.1.11 integer read-write
DNS proxy port for QOS translation queries Enumeration: 'default': 500, 'max': 32550, 'min': 1.
     wfAsrMaxSessions 1.3.6.1.4.1.18.3.5.9.11.1.12 integer read-write
Maximum number of TCP/IP sessions which are to be managed by ASR. Enumeration: 'default': 500.
     wfAsrDebugLevel 1.3.6.1.4.1.18.3.5.9.11.1.13 integer read-write
Debug level in which to enable log messages. The greater the value, the more detailed the log messages.
     wfAsrUseDynRdiscPref 1.3.6.1.4.1.18.3.5.9.11.1.14 integer read-write
Enable/Disable parameter for ASR to update the Dynamic Router Discovery Preference value. If enabled, wfRdiscInterfacePref must be 0 in order to advertise the ASR Dynamic Preference. Enumeration: 'enable': 1, 'disable': 2.
 wfAsrX213PriTable 1.3.6.1.4.1.18.3.5.9.11.2 no-access
A table used by ASR to convert the X.213 priority value returned by NHS to a switch specific Value.
     wfAsrX213PriEntry 1.3.6.1.4.1.18.3.5.9.11.2.1 no-access
X.213 conversion table.
         wfAsrX213PriDelete 1.3.6.1.4.1.18.3.5.9.11.2.1.1 integer read-write
Create/delete indicator for X.213 priority table entry. Enumeration: 'deleted': 2, 'created': 1.
         wfAsrX213PriLowVal 1.3.6.1.4.1.18.3.5.9.11.2.1.2 integer read-only
Low value of X.213 priority range.
         wfAsrX213PriHiVal 1.3.6.1.4.1.18.3.5.9.11.2.1.3 integer read-only
High value of X.213 priority range.
         wfAsrX213PriSwVal 1.3.6.1.4.1.18.3.5.9.11.2.1.4 integer read-write
Switch specific X.213 priority value.
 wfAsrRtrPriTable 1.3.6.1.4.1.18.3.5.9.11.3 no-access
A table used by ASR to convert the router priority value returned by NHS to a router priority queue.
     wfAsrRtrPriEntry 1.3.6.1.4.1.18.3.5.9.11.3.1 no-access
Router priority conversion table.
         wfAsrRtrPriDelete 1.3.6.1.4.1.18.3.5.9.11.3.1.1 integer read-write
Create/delete indicator for Router priority table entry. Enumeration: 'deleted': 2, 'created': 1.
         wfAsrRtrPriLowVal 1.3.6.1.4.1.18.3.5.9.11.3.1.2 integer read-only
Low value of router priority range.
         wfAsrRtrPriHiVal 1.3.6.1.4.1.18.3.5.9.11.3.1.3 integer read-only
High value of router priority range.
         wfAsrRtrPriCvtVal 1.3.6.1.4.1.18.3.5.9.11.3.1.4 integer read-write
Router priority Queue value.
 wfAsrMultiHopTable 1.3.6.1.4.1.18.3.5.9.11.4 no-access
A table used by ASR to identify those PVCs that can be used as a multi hop path or overlay network.
     wfAsrMultiHopEntry 1.3.6.1.4.1.18.3.5.9.11.4.1 no-access
Multi Hop PVC identification.
         wfAsrMultiHopDelete 1.3.6.1.4.1.18.3.5.9.11.4.1.1 integer read-write
Create/delete indicator for multi hop table entry. Enumeration: 'deleted': 2, 'created': 1.
         wfAsrMhCircuitNumber 1.3.6.1.4.1.18.3.5.9.11.4.1.2 integer read-only
Instance identifier. The circuit number of this interface.
         wfAsrMhVcid1 1.3.6.1.4.1.18.3.5.9.11.4.1.3 integer read-only
VCID 1 value. The Dlci number for Frame Relay, the VPI for ATM.
         wfAsrMhVcid2 1.3.6.1.4.1.18.3.5.9.11.4.1.4 integer read-only
VCID 2 value. The VCI for ATM, NULL for Frame Relay.
 wfAsrDirectExceptTable 1.3.6.1.4.1.18.3.5.9.11.5 no-access
The directional exception asymmetric route avoidance table. This tables index is made up of the protocol and service field.
     wfAsrDirectExceptEntry 1.3.6.1.4.1.18.3.5.9.11.5.1 no-access
The ASR directional exception table.
         wfAsrServiceProtocol 1.3.6.1.4.1.18.3.5.9.11.5.1.1 integer read-write
Service protocol indicates what protocol this entry is for. Coices are UDP or TCP. Enumeration: 'udp': 17, 'tcp': 6.
         wfAsrServicePort 1.3.6.1.4.1.18.3.5.9.11.5.1.2 integer read-write
Application port number of service connecting to.
         wfAsrSrcPortLow 1.3.6.1.4.1.18.3.5.9.11.5.1.3 integer read-write
Low port number of application serving as source used at host site.
         wfAsrSrcPortHigh 1.3.6.1.4.1.18.3.5.9.11.5.1.4 integer read-write
High port number of application serving as source used at host site.
         wfAsrDestPortLow 1.3.6.1.4.1.18.3.5.9.11.5.1.5 integer read-write
Low port number of application serving as destination used at client site.
         wfAsrDestPortHigh 1.3.6.1.4.1.18.3.5.9.11.5.1.6 integer read-write
High port number of application serving as destination used at client site.
 wfAsrCircuitTable 1.3.6.1.4.1.18.3.5.9.11.6 no-access
A table which contains configuration information for each circuit defined to ASR but not specific to a specific circuit. The table is indexed by circuit number.
     wfAsrCircuitEntry 1.3.6.1.4.1.18.3.5.9.11.6.1 no-access
An ASR circuit description
         wfAsrCircuitCreate 1.3.6.1.4.1.18.3.5.9.11.6.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an ASR circuit. Enumeration: 'create': 1, 'delete': 2.
         wfAsrCircuitEnable 1.3.6.1.4.1.18.3.5.9.11.6.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an ASR circuit. Enumeration: 'enable': 1, 'disable': 2.
         wfAsrCircuitState 1.3.6.1.4.1.18.3.5.9.11.6.1.3 integer read-only
Invalid indicates an error in processing the cfg record Enumeration: 'down': 2, 'notpres': 5, 'init': 3, 'up': 1, 'invalid': 4.
         wfAsrCircuitNumber 1.3.6.1.4.1.18.3.5.9.11.6.1.4 integer read-only
Instance identifier. The circuit number of this interface.
         wfAsrCircuitCallCtrl 1.3.6.1.4.1.18.3.5.9.11.6.1.5 integer read-write
Define call policy for this SVC circuit. 1) allow inbound calls only 2) allow outbound calls only 3)allow inbound and outbound calls 4) allow neither inbound or outbound calls. Enumeration: 'none': 4, 'inboundandoutbound': 3, 'outboundonly': 2, 'inboundonly': 1.
         wfAsrCircuitInReceives 1.3.6.1.4.1.18.3.5.9.11.6.1.6 counter read-only
The total number of input datagrams received at the circuit, including those received in error.
         wfAsrCircuitInDiscards 1.3.6.1.4.1.18.3.5.9.11.6.1.7 counter read-only
The total number of input datagrams discarded due to failed setup attempts, unreachable destinations, etc.
         wfAsrCircuitSetupRequests 1.3.6.1.4.1.18.3.5.9.11.6.1.8 counter read-only
The total number of SVC setup requests attempted on the circuit , including those which failed.
         wfAsrCircuitSetupSucc 1.3.6.1.4.1.18.3.5.9.11.6.1.9 counter read-only
The total number of SVC setup requests attempted on the circuit which resulted in an SVC being established.
         wfAsrCircuitSetupFail 1.3.6.1.4.1.18.3.5.9.11.6.1.10 counter read-only
The total number of SVC setup requests attempted on the circuit which resulted in an SVC not being established.
         wfAsrCircuitSVCsEstablished 1.3.6.1.4.1.18.3.5.9.11.6.1.11 counter read-only
The total number of SVCs currently established on the circuit.
         wfAsrNegativeNHR 1.3.6.1.4.1.18.3.5.9.11.6.1.12 counter read-only
Count of negative NHR responses received from NHRP.
         wfAsrSvcOutboundReqFail 1.3.6.1.4.1.18.3.5.9.11.6.1.13 counter read-only
Count of outbound requests for SVCs that failed.
         wfAsrSvcInboundFilterFail 1.3.6.1.4.1.18.3.5.9.11.6.1.14 counter read-only
Count of inbound packets failing inbound packet filtering.
         wfAsrSvcInboundCallValFail 1.3.6.1.4.1.18.3.5.9.11.6.1.15 counter read-only
Count of inbound SVC call validation failures.
 wfAsrFiltTable 1.3.6.1.4.1.18.3.5.9.11.7 no-access
A table containing setup information related to an SVC. The table is indexed by slot,dest ip addr and mask, source ip addr and mask, source and dest port ranges and protocol.
     wfAsrFiltEntry 1.3.6.1.4.1.18.3.5.9.11.7.1 no-access
ASR SVC setup information.
         wfAsrFilterCreate 1.3.6.1.4.1.18.3.5.9.11.7.1.1 integer read-write
Create/delete this filter entry. Enumeration: 'deleted': 2, 'created': 1.
         wfAsrFilterSlot 1.3.6.1.4.1.18.3.5.9.11.7.1.2 integer read-only
The router slot on which this filter exists.
         wfAsrDestIpAddr 1.3.6.1.4.1.18.3.5.9.11.7.1.3 ipaddress read-only
Filter destination IP address reference value.
         wfAsrDestIpMask 1.3.6.1.4.1.18.3.5.9.11.7.1.4 ipaddress read-only
Filter destination IP address mask.
         wfAsrSourceIpAddr 1.3.6.1.4.1.18.3.5.9.11.7.1.5 ipaddress read-only
Filter source IP address reference value.
         wfAsrSourceIpMask 1.3.6.1.4.1.18.3.5.9.11.7.1.6 ipaddress read-only
Filter source IP address mask.
         wfAsrDestPortRangeLow 1.3.6.1.4.1.18.3.5.9.11.7.1.7 integer read-only
The low value for the range of TCP/UDP destination ports.
         wfAsrDestPortRangeHigh 1.3.6.1.4.1.18.3.5.9.11.7.1.8 integer read-only
The high value for the range of TCP/UDP destination ports.
         wfAsrSourcePortRangeLow 1.3.6.1.4.1.18.3.5.9.11.7.1.9 integer read-only
The low value for the range of TCP/UDP source ports.
         wfAsrSourcePortRangeHigh 1.3.6.1.4.1.18.3.5.9.11.7.1.10 integer read-only
The high value for the range of TCP/UDP source ports.
         wfAsrIPProtocol 1.3.6.1.4.1.18.3.5.9.11.7.1.11 integer read-only
IP protocol for this filter (TCP or UDP).
         wfAsrFilterTtl 1.3.6.1.4.1.18.3.5.9.11.7.1.12 integer read-only
For SVC filters, this is the SVC idle time (seconds). For all other filter types, this is the filter expiration time (seconds).
         wfAsrFilterType 1.3.6.1.4.1.18.3.5.9.11.7.1.13 displaystring read-only
Type of filter (SVC, NOSVC, in-progress, dest unreachable).
         wfAsrSvcCircuitNumber 1.3.6.1.4.1.18.3.5.9.11.7.1.14 integer read-only
Circuit number on which the SVC is created.
         wfAsrSvcVcid1 1.3.6.1.4.1.18.3.5.9.11.7.1.15 integer read-only
For Frame Relay SVCs, this is the DLCI value. For ATM SVCs, this is the VPI value.
         wfAsrSvcVcid2 1.3.6.1.4.1.18.3.5.9.11.7.1.16 integer read-only
For ATM SVCs, this is the VCI value.
         wfAsrSvcCalledAddr 1.3.6.1.4.1.18.3.5.9.11.7.1.17 displaystring read-only
SVC Called Party Address
         wfAsrSvcSetupTime 1.3.6.1.4.1.18.3.5.9.11.7.1.18 integer read-only
Time stamp of when the SVC was created.
         wfAsrSvcType 1.3.6.1.4.1.18.3.5.9.11.7.1.19 integer read-write
Type of SVC created (Frame Relay or ATM). Enumeration: 'fr': 1, 'atm': 2.
         wfAsrSvcMTU 1.3.6.1.4.1.18.3.5.9.11.7.1.20 integer read-only
The maximum transmission unit for this SVC.
         wfAsrSvcRouterPriOut 1.3.6.1.4.1.18.3.5.9.11.7.1.21 integer read-only
The router priority queue to be used for the packets sent on this SVC.
         wfAsrFrSvcCIRIn 1.3.6.1.4.1.18.3.5.9.11.7.1.22 integer read-only
Frame Relay SVC commited information rate - inbound (bps).
         wfAsrFrSvcCIROut 1.3.6.1.4.1.18.3.5.9.11.7.1.23 integer read-only
Frame Relay SVC commited information rate - outbound (bps).
         wfAsrFrSvcBCIn 1.3.6.1.4.1.18.3.5.9.11.7.1.24 integer read-only
Frame Relay commited burst rate for SVC - inbound (bps).
         wfAsrFrSvcBCOut 1.3.6.1.4.1.18.3.5.9.11.7.1.25 integer read-only
Frame Relay commited burst rate for the SVC - outbound (bps).
         wfAsrFrSvcBEIn 1.3.6.1.4.1.18.3.5.9.11.7.1.26 integer read-only
Frame Relay excess burst rate for the SVC - inbound (bps).
         wfAsrFrSvcBEOut 1.3.6.1.4.1.18.3.5.9.11.7.1.27 integer read-only
Frame Relay excess burst rate for the SVC - outbound (bps).
         wfAsrFrSvcX213Pri 1.3.6.1.4.1.18.3.5.9.11.7.1.28 integer read-only
Frame Relay SVC X.213 data priority value passed to the switch during call setup.
         wfAsrAtmSvcPCRIn 1.3.6.1.4.1.18.3.5.9.11.7.1.29 integer read-only
ATM SVC Peak Cell Rate - inbound.
         wfAsrAtmSvcPCROut 1.3.6.1.4.1.18.3.5.9.11.7.1.30 integer read-only
ATM SVC Peak Cell Rate - outbound.
         wfAsrAtmSvcSCRIn 1.3.6.1.4.1.18.3.5.9.11.7.1.31 integer read-only
ATM SVC Sustainable Cell Rate - inbound.
         wfAsrAtmSvcSCROut 1.3.6.1.4.1.18.3.5.9.11.7.1.32 integer read-only
ATM SVC Sustainable Cell Rate - outbound.
         wfAsrAtmSvcMBSIn 1.3.6.1.4.1.18.3.5.9.11.7.1.33 integer read-only
ATM SVC Maximum Burst Size - inbound.
         wfAsrAtmSvcMBSOut 1.3.6.1.4.1.18.3.5.9.11.7.1.34 integer read-only
ATM SVC Maximum Burst Size - outbound.
         wfAsrAtmSvcQOSClassIn 1.3.6.1.4.1.18.3.5.9.11.7.1.35 integer read-only
ATM SVC Quality of Service - inbound. Class 0 through 4.
         wfAsrAtmSvcQOSClassOut 1.3.6.1.4.1.18.3.5.9.11.7.1.36 integer read-only
ATM SVC Quality of Service - outbound. Class 0 through 4.
         wfAsrAtmSvcCDVTIn 1.3.6.1.4.1.18.3.5.9.11.7.1.37 integer read-only
ATM SVC Cell Delay Variation Tolerance - inbound.
         wfAsrAtmSvcCDVTOut 1.3.6.1.4.1.18.3.5.9.11.7.1.38 integer read-only
ATM SVC Cell Delay Variation Tolerance - outbound.
         wfAsrAtmSvcCLRIn 1.3.6.1.4.1.18.3.5.9.11.7.1.39 integer read-only
ATM SVC Cell Loss Ratio - inbound.
         wfAsrAtmSvcCLROut 1.3.6.1.4.1.18.3.5.9.11.7.1.40 integer read-only
ATM SVC Cell Loss Ratio - outbound.
 wfAsrTest 1.3.6.1.4.1.18.3.5.9.11.8
     wfAsrTestCreate 1.3.6.1.4.1.18.3.5.9.11.8.1 integer read-write
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete ASR Test Object. Enumeration: 'deleted': 2, 'created': 1.
     wfAsrTestChangeVal 1.3.6.1.4.1.18.3.5.9.11.8.2 integer read-write
Value to set the protocol field in the ASR Fwd Table. This will take the SVC entry matching the Dlci and Cct number and change the filter. This is used only for Inbound Pkt Filtering tests
     wfAsrTestDlci 1.3.6.1.4.1.18.3.5.9.11.8.3 integer read-write
Dlci of SVC Filter entry to change
     wfAsrTestCct 1.3.6.1.4.1.18.3.5.9.11.8.4 integer read-write
Circuit number of SVC Filter to change