WWP-LEOS-SYSTEM-CONFIG-MIB: View SNMP OID List / Download MIB

VENDOR: WORLD WIDE PACKETS


 Home MIB: WWP-LEOS-SYSTEM-CONFIG-MIB
Download as:   
SNMPv2-CONF, WWP-SMI, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wwpLeosSystemConfigMIB 1.3.6.1.4.1.6141.2.60.12
The MIB module for the WWP System Config information.
       wwpLeosSystemConfigMIBObjects 1.3.6.1.4.1.6141.2.60.12.1
           wwpLeosSystemConfigAttr 1.3.6.1.4.1.6141.2.60.12.1.1
               wwpLeosSystemConfigDefaultGateway 1.3.6.1.4.1.6141.2.60.12.1.1.1 ipaddress read-write
Default gateway IP address.
               wwpLeosSystemConfigBootCmdFile 1.3.6.1.4.1.6141.2.60.12.1.1.2 filename read-write
Name of the last successfully executed command file name executed by the device.
               wwpLeosSystemConfigBootCfgFile 1.3.6.1.4.1.6141.2.60.12.1.1.3 filename read-write
This mib object specifies the bootup config file for the system. Setting is object is similar to setting default load config file name. When device will reboot it will attempt to load the file specified by wwpLeosSystemConfigBootCfgFile.
               wwpLeosSystemClockDateTime 1.3.6.1.4.1.6141.2.60.12.1.1.4 dateandtime read-write
The current system date and time of box. There are no provisions for local time or daylight savings. All times use the 24 hr clock and are UTC. Because device time is UTC, only first 7 bytes of DateAndTime data are returned, as per RFC1903.
               wwpLeosSystemConfigSavePermFile 1.3.6.1.4.1.6141.2.60.12.1.1.5 filename read-write
Setting this object will set the save file name to the value of wwpLeosSystemConfigSavePermFile. What it means is that whenever wwpLeosSystemConfigControl is set to value 'save' then if wwpLeosSystemConfigSaveFile is not set then device will use wwpLeosSystemConfigSavePermFile as the file name to store config.
               wwpLeosSystemConfigLastFileNameReset 1.3.6.1.4.1.6141.2.60.12.1.1.6 truthvalue read-write
Setting this object will reset the name of the last config filename that was successfully executed by the device.
               wwpLeosSystemServiceMode 1.3.6.1.4.1.6141.2.60.12.1.1.7 integer read-write
Setting this object will change the service mode of operation. It will cause device to reboot. If this object is set to 'none' then device will reject the request and will return error. Enumeration: 'pbt': 2, 'none': 0, 'mpls': 1, 'aoam': 3.
               wwpLeosSystemConfigBackupGateway 1.3.6.1.4.1.6141.2.60.12.1.1.8 ipaddress read-write
Backup gateway IP address.
               wwpLeosSystemConfigCustomerCfgFile 1.3.6.1.4.1.6141.2.60.12.1.1.9 filename read-write
Setting this object will set the name of the default customer configuration file name, which is the file that will copied to the default configuration file during a reset-to-customer-default operation. Setting this object to an empty string will remove the file name from the system configuration.
               wwpLeosSystemConfigDefaultGatewayTable 1.3.6.1.4.1.6141.2.60.12.1.1.10 no-access
The (conceptual) table listing the default gateways
                     wwpLeosSystemConfigDefaultGatewayEntry 1.3.6.1.4.1.6141.2.60.12.1.1.10.1 no-access
An entry (conceptual row) in the wwpLeosSystemConfigDefaultGatewayTable.
                         wwpLeosSystemConfigDefaultGatewayIndex 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1 integer32 no-access
Unique identifier to the table.
                         wwpLeosSystemConfigDefaultGatewayInetAddrType 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2 inetaddresstype read-only
The Inet address type of default gateway. Used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddressIPv4 from RFC 4001 ipv6: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddressIPv6 from RFC 4001.
                         wwpLeosSystemConfigDefaultGatewayInetAddress 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3 inetaddress read-only
Default gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigDefaultGateway is set ot 0.0.0.0.
                         wwpLeosSystemConfigDefaultGatewayInterfaceName 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4 displaystring read-only
Interface Name of the gateway, local or remote.
                         wwpLeosSystemConfigDefaultGatewayMetric 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5 integer32 read-only
Metric of the gateway.
                         wwpLeosSystemConfigDefaultGatewayStatus 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'.
               wwpLeosSystemConfigBackupGatewayTable 1.3.6.1.4.1.6141.2.60.12.1.1.11 no-access
The (conceptual) table listing the default gateways
                     wwpLeosSystemConfigBackupGatewayEntry 1.3.6.1.4.1.6141.2.60.12.1.1.11.1 no-access
An entry (conceptual row) in the wwpLeosSystemConfigBackupGatewayTable.
                         wwpLeosSystemConfigBackupGatewayIndex 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1 integer32 no-access
Unique identifier to the table.
                         wwpLeosSystemConfigBackupGatewayInetAddrType 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2 inetaddresstype read-only
The Inet address type of backup gateway. Used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddressIPv4 from RFC 4001 ipv6: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddressIPv6 from RFC 4001.
                         wwpLeosSystemConfigBackupGatewayInetAddress 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3 inetaddress read-only
Backup gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigBackupGateway is set ot 0.0.0.0.
                         wwpLeosSystemConfigBackupGatewayInterfaceName 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4 displaystring read-only
Interface Name of the gateway, local or remote.
                         wwpLeosSystemConfigBackupGatewayMetric 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5 integer32 read-only
Metric of the gateway.
                         wwpLeosSystemConfigBackupGatewayStatus 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'.
           wwpLeosSystemConfig 1.3.6.1.4.1.6141.2.60.12.1.2
               wwpLeosSystemConfigSaveFileName 1.3.6.1.4.1.6141.2.60.12.1.2.1 filename read-write
wwpLeosSystemConfigSaveFileName specifies the name of the config file to be used when wwpLeosSystemConfigControl has been set to 'save'. If this object is not set then device will use the file name specified by wwpLeosSystemConfigSavePermFile. If wwpLeosSystemConfigSavePermFile is also not set then default config file name i.e startup-config will be used to save config. Once 'wwpLeosSystemConfigControl' has been successfully applied, read on wwpLeosSystemConfigSaveFileName will always return empty string else it will show what user has configured.
               wwpLeosSystemConfigControl 1.3.6.1.4.1.6141.2.60.12.1.2.2 integer read-write
Controls configuration options on the device. The current options are: save: to make the configuration changes made using SNMP persistent across a reboot. mfgDefaultCfg: Set system configuration to factory defaults. Note: this will wipe out all of the current configuration including Password and VLAN information. If the system doesn't support any of these control configuration option, it should return error while trying to set this object to the specific option. A read on this object should return none(0). Enumeration: 'none': 0, 'save': 1, 'mfgDefaultCfg': 2.
               wwpLeosSystemConfigFilepath 1.3.6.1.4.1.6141.2.60.12.1.2.3 filename read-only
Returns the path for configuration related files.
               wwpLeosSystemConfigFileTable 1.3.6.1.4.1.6141.2.60.12.1.2.4 no-access
The (conceptual) table listing the configs
                   wwpLeosSystemConfigFileEntry 1.3.6.1.4.1.6141.2.60.12.1.2.4.1 no-access
An entry (conceptual row) in the wwpLeosSystemConfigFileTable.
                       wwpLeosSystemConfigFileIndex 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1 integer32 no-access
Unique identifier to the table.
                       wwpLeosSystemConfigFileName 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2 filename read-only
The name of the Config file.
                       wwpLeosSystemConfigActivateFile 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3 integer read-write
Set this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName' config. If the operation was successful, this object performs the CLI equivalent to these commands and will return the status Setting this object to 'resetToCfg' will kills the load module and reloads a new load module and applies the config file specified by wwpLeosSystemConfigFileName. Setting this object to none will do nothing. Enumeration: 'loadCfg': 1, 'resetToCfg': 2, 'none': 3.
           wwpLeosSystemTelnet 1.3.6.1.4.1.6141.2.60.12.1.3
               wwpLeosTelnetMaxBaseUserSessions 1.3.6.1.4.1.6141.2.60.12.1.3.1 integer32 read-write
The max number of base user telnet sessions for the device.
               wwpLeosTelnetMaxSuperUserSessions 1.3.6.1.4.1.6141.2.60.12.1.3.2 integer32 read-write
The max number of super user telnet sessions for the device.
               wwpLeosTelnetMaxAdminUserSessions 1.3.6.1.4.1.6141.2.60.12.1.3.3 integer32 read-write
The max number of admin users telnet sessions for the device.
           wwpLeosSystemCpuLoadQuery 1.3.6.1.4.1.6141.2.60.12.1.7
               wwpLeosSystemCpuLoad1Min 1.3.6.1.4.1.6141.2.60.12.1.7.1 integer32 read-only
The OID to display CPU load in last 1 min. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad10Min 1.3.6.1.4.1.6141.2.60.12.1.7.2 integer32 read-only
The OID to display CPU load in last 10 min. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad15Min 1.3.6.1.4.1.6141.2.60.12.1.7.3 integer32 read-only
The OID to display CPU load in last 15 min. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad5Min 1.3.6.1.4.1.6141.2.60.12.1.7.4 integer32 read-only
The OID to display CPU load in last 5 min. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad1MinMinimum 1.3.6.1.4.1.6141.2.60.12.1.7.5 integer32 read-only
The minimum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad1MinMaximum 1.3.6.1.4.1.6141.2.60.12.1.7.6 integer32 read-only
The maximum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad1MinState 1.3.6.1.4.1.6141.2.60.12.1.7.7 integer read-only
The 1 minute CPU load average state. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
               wwpLeosSystemCpuLoad15MinMinimum 1.3.6.1.4.1.6141.2.60.12.1.7.8 integer32 read-only
The minimum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad15MinMaximum 1.3.6.1.4.1.6141.2.60.12.1.7.9 integer32 read-only
The maximum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad15MinState 1.3.6.1.4.1.6141.2.60.12.1.7.10 integer read-only
The 15 minutes CPU load average state. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
               wwpLeosSystemCpuLoad5MinMinimum 1.3.6.1.4.1.6141.2.60.12.1.7.11 integer32 read-only
The minimum 5 minutes CPU load average. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad5MinMaximum 1.3.6.1.4.1.6141.2.60.12.1.7.12 integer32 read-only
The maximum 5 minutes CPU load average. This value is an integer representation of the CPU load (load average * 100).
               wwpLeosSystemCpuLoad5MinState 1.3.6.1.4.1.6141.2.60.12.1.7.13 integer read-only
The 5 minutes CPU load average state. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
           wwpLeosSystemConfigNotif 1.3.6.1.4.1.6141.2.60.12.1.8
               wwpLeosSystemConfigNotifTable 1.3.6.1.4.1.6141.2.60.12.1.8.1 no-access
The (conceptual) table listing the configuration file line numbers. This table is only used when sending wwpLeosImproperCmdInConfigFile notification. No Get, GetNext or Set is allowed on this table.
                   wwpLeosSystemConfigNotifEntry 1.3.6.1.4.1.6141.2.60.12.1.8.1.1 no-access
An entry (conceptual row) in the wwpLeosSystemConfigNotifTable. No Get, GetNext or Set is allowed on this table.
                       wwpLeosSystemConfigErrLineNum 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1 integer32 read-only
The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the line number which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.
                       wwpLeosSystemConfigErrStr 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2 displaystring read-only
The OID is wwpLeosSystemConfigErrStr trap to identify the line which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.
                       wwpLeosSystemConfigErrLinesTotal 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3 integer32 read-only
The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the total line numbers which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.
           wwpLeosSystemMemoryUsageQuery 1.3.6.1.4.1.6141.2.60.12.1.9
               wwpLeosSystemMemoryUsageTable 1.3.6.1.4.1.6141.2.60.12.1.9.1 no-access
Table of Memory Usage for various Memory Pools.
                   wwpLeosSystemMemoryUsageEntry 1.3.6.1.4.1.6141.2.60.12.1.9.1.1 no-access
An entry for each Memory Pool.
                       wwpLeosSystemMemoryUsagePoolIndex 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1 integer no-access
The Memory Pool type. Enumeration: 'ose-pool-1': 1, 'malloc-heap': 3, 'global-heap': 2.
                       wwpLeosSystemMemoryUsageMemoryTotal 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2 unsigned32 read-only
Total size of the Memory Pool in bytes.
                       wwpLeosSystemMemoryUsageMemoryLWM 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3 unsigned32 read-only
Lowest free memory in the Memory Pool in bytes. Not supported in SAOS 6.x
                       wwpLeosSystemMemoryUsageMemoryFree 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4 unsigned32 read-only
Amount of free memory in the Memory Pool in bytes. This corresponds to the CLI's memory never used.
                       wwpLeosSystemMemoryUsageStatus 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5 integer read-only
Denotes if the free memory amount is normal or below limit. Enumeration: 'notSupported': 3, 'lowMemory': 2, 'normal': 1.
                       wwpLeosSystemMemoryUsageMemoryUsed 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6 unsigned32 read-only
Amount of used memory in the Memory Pool in bytes..
                       wwpLeosSystemMemoryUsageMemoryAvailable 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7 unsigned32 read-only
Amount of available memory in the Memory Pool in bytes.
           wwpLeosSystemXFtp 1.3.6.1.4.1.6141.2.60.12.1.10
                 wwpLeosSystemXFtpMode 1.3.6.1.4.1.6141.2.60.12.1.10.1 integer read-write
Select between modes of file transfer. The default mode is tftp. Enumeration: 'ftp': 2, 'tftp': 1, 'sftp': 3.
                 wwpLeosSystemXFtpServer 1.3.6.1.4.1.6141.2.60.12.1.10.2 displaystring read-write
IP address or the host name of default server.
                 wwpLeosSystemXFtpUserName 1.3.6.1.4.1.6141.2.60.12.1.10.3 displaystring read-write
Name used to login with.
                 wwpLeosSystemXFtpPasswd 1.3.6.1.4.1.6141.2.60.12.1.10.4 displaystring read-write
Password used to login with.
                 wwpLeosSystemXFtpNumOfRetries 1.3.6.1.4.1.6141.2.60.12.1.10.5 integer32 read-write
Number of times to retry a file transfer request if it fails.
                 wwpLeosSystemXFtpRetryInterval 1.3.6.1.4.1.6141.2.60.12.1.10.6 integer32 read-write
Length of time in seconds to wait before retrying a file transfer if it fails.
                 wwpLeosSystemXFtpConnectionTimeout 1.3.6.1.4.1.6141.2.60.12.1.10.7 integer32 read-write
Length of time in seconds to wait before connection times out.
                 wwpLeosSystemXFtpTFtpServerTable 1.3.6.1.4.1.6141.2.60.12.1.10.8 no-access
The (conceptual) table listing the default TFTP server
                     wwpLeosSystemXFtpTFtpServerEntry 1.3.6.1.4.1.6141.2.60.12.1.10.8.1 no-access
An entry (conceptual row) in the wwpLeosSystemXFtpTFtpServerTable.
                         wwpLeosSystemXFtpTFtpServerIndex 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1 integer32 no-access
Unique identifier to the table.
                         wwpLeosSystemXFtpTFtpServerHostName 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2 displaystring read-only
Host name or IP address of the default TFTP server.
                         wwpLeosSystemXFtpTFtpServerRowStatus 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.
                 wwpLeosSystemXFtpFtpServerTable 1.3.6.1.4.1.6141.2.60.12.1.10.9 no-access
The (conceptual) table listing the default FTP server
                     wwpLeosSystemXFtpFtpServerEntry 1.3.6.1.4.1.6141.2.60.12.1.10.9.1 no-access
An entry (conceptual row) in the wwpLeosSystemXFtpFtpServerTable.
                         wwpLeosSystemXFtpFtpServerIndex 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1 integer32 no-access
Unique identifier to the table.
                         wwpLeosSystemXFtpFtpServerHostName 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2 displaystring read-only
Host name or IP address of the default FTP server.
                         wwpLeosSystemXFtpFtpServerUserName 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3 displaystring read-only
User name / login ID to be used with the default FTP server.
                         wwpLeosSystemXFtpFtpServerPassword 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4 displaystring read-only
Password to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.
                         wwpLeosSystemXFtpFtpServerSecret 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5 displaystring read-only
Password secret to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.
                         wwpLeosSystemXFtpFtpServerRowStatus 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.
                 wwpLeosSystemXFtpSFtpServerTable 1.3.6.1.4.1.6141.2.60.12.1.10.10 no-access
The (conceptual) table listing the default SFTP server
                       wwpLeosSystemXFtpSFtpServerEntry 1.3.6.1.4.1.6141.2.60.12.1.10.10.1 no-access
An entry (conceptual row) in the wwpLeosSystemXFtpSFtpServerTable.
                           wwpLeosSystemXFtpSFtpServerIndex 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1 integer32 no-access
Unique identifier to the table.
                           wwpLeosSystemXFtpSFtpServerHostName 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2 displaystring read-only
Host name or IP address of the default SFTP server.
                           wwpLeosSystemXFtpSFtpServerUserName 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3 displaystring read-only
User name / login ID to be used with the default SFTP server.
                           wwpLeosSystemXFtpSFtpServerPassword 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4 displaystring read-only
Password to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.
                           wwpLeosSystemXFtpSFtpServerSecret 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5 displaystring read-only
Password secret to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.
                           wwpLeosSystemXFtpSFtpServerRowStatus 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.
           wwpLeosSystemCpuUtilization 1.3.6.1.4.1.6141.2.60.12.1.11
                 wwpLeosSystemCpuUtilizationLast5Seconds 1.3.6.1.4.1.6141.2.60.12.1.11.1 integer32 read-only
Average 5 second CPU usage measurement.
                 wwpLeosSystemCpuUtilizationLast5SecondsMinimum 1.3.6.1.4.1.6141.2.60.12.1.11.2 integer32 read-only
Minimum 5 second CPU usage measurement.
                 wwpLeosSystemCpuUtilizationLast5SecondsMaximum 1.3.6.1.4.1.6141.2.60.12.1.11.3 integer32 read-only
The maximum 5 seconds CPU usage measurement.
                 wwpLeosSystemCpuUtilizationLast5SecondsState 1.3.6.1.4.1.6141.2.60.12.1.11.4 integer read-only
The 5 seconds CPU usage state. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
                 wwpLeosSystemCpuUtilizationLast10Seconds 1.3.6.1.4.1.6141.2.60.12.1.11.5 integer32 read-only
The 10 seconds CPU usage measurement.
                 wwpLeosSystemCpuUtilizationLast10SecondsMinimum 1.3.6.1.4.1.6141.2.60.12.1.11.6 integer32 read-only
Minimum 10 seconds CPU usage measurement.
                 wwpLeosSystemCpuUtilizationLast10SecondsMaximum 1.3.6.1.4.1.6141.2.60.12.1.11.7 integer32 read-only
Maximum 10 seconds CPU usage measurement.
                 wwpLeosSystemCpuUtilizationLast10SecondsState 1.3.6.1.4.1.6141.2.60.12.1.11.8 integer read-only
The 10 seconds CPU usage state. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
                 wwpLeosSystemCpuUtilizationLast60Seconds 1.3.6.1.4.1.6141.2.60.12.1.11.9 integer32 read-only
The 60 seconds CPU usage state.
                 wwpLeosSystemCpuUtilizationLast60SecondsMinimum 1.3.6.1.4.1.6141.2.60.12.1.11.10 integer32 read-only
Minimum 60 seconds CPU usage measurement.
                 wwpLeosSystemCpuUtilizationLast60SecondsMaximum 1.3.6.1.4.1.6141.2.60.12.1.11.11 integer32 read-only
Maximum 60 seconds CPU usage measurement.
                 wwpLeosSystemCpuUtilizationLast60SecondsState 1.3.6.1.4.1.6141.2.60.12.1.11.12 integer read-only
The 60 seconds CPU state. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
           wwpLeosSystemFileSystemUtilization 1.3.6.1.4.1.6141.2.60.12.1.12
                 wwpLeosSystemFileSystemUtilizationTmpfsCurrent 1.3.6.1.4.1.6141.2.60.12.1.12.1 integer32 read-only
Current percentage usage of the /tmp/ directory in the filesystem.
                 wwpLeosSystemFileSystemUtilizationTmpfsMinimum 1.3.6.1.4.1.6141.2.60.12.1.12.2 integer32 read-only
Minimum percentage usage of the /tmp/ directory in the file system.
                 wwpLeosSystemFileSystemUtilizationTmpfsMaximum 1.3.6.1.4.1.6141.2.60.12.1.12.3 integer32 read-only
Maximum percentage usage of the /tmp/ directory in the file system.
                 wwpLeosSystemFileSystemUtilizationTmpfsState 1.3.6.1.4.1.6141.2.60.12.1.12.4 integer read-only
Current state of the /tmp/ directory in the file system. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
                 wwpLeosSystemFileSystemUtilizationSysfsCurrent 1.3.6.1.4.1.6141.2.60.12.1.12.5 integer32 read-only
Current percentage usage of the /mnt/sysfs/ directory in the file system.
                 wwpLeosSystemFileSystemUtilizationSysfsMinimum 1.3.6.1.4.1.6141.2.60.12.1.12.6 integer32 read-only
Minimum percentage usage of the /mnt/sysfs/ directory in the file system.
                 wwpLeosSystemFileSystemUtilizationSysfsMaximum 1.3.6.1.4.1.6141.2.60.12.1.12.7 integer32 read-only
Maximum percentage usage of the /mnt/sysfs/ directory in the file system.
                 wwpLeosSystemFileSystemUtilizationSysfsState 1.3.6.1.4.1.6141.2.60.12.1.12.8 integer read-only
Current state of the /mnt/sysfs/ directory in the file system. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
           wwpLeosSystemMemoryUtilization 1.3.6.1.4.1.6141.2.60.12.1.13
                 wwpLeosSystemMemoryUtilizationUsedMemoryCurrent 1.3.6.1.4.1.6141.2.60.12.1.13.1 gauge32 read-only
Current number of used memory in bytes.
                 wwpLeosSystemMemoryUtilizationUsedMemoryMinimum 1.3.6.1.4.1.6141.2.60.12.1.13.2 gauge32 read-only
Minimum number of used memory in bytes.
                 wwpLeosSystemMemoryUtilizationUsedMemoryMaximum 1.3.6.1.4.1.6141.2.60.12.1.13.3 gauge32 read-only
Maximum number of used memory in bytes.
                 wwpLeosSystemMemoryUtilizationAvailableMemoryCurrent 1.3.6.1.4.1.6141.2.60.12.1.13.4 gauge32 read-only
Current number of available memory in bytes.
                 wwpLeosSystemMemoryUtilizationAvailableMemoryMinimum 1.3.6.1.4.1.6141.2.60.12.1.13.5 gauge32 read-only
Minimum number of available memory in bytes.
                 wwpLeosSystemMemoryUtilizationAvailableMemoryMaximum 1.3.6.1.4.1.6141.2.60.12.1.13.6 gauge32 read-only
Maximum number of available memory in bytes.
                 wwpLeosSystemMemoryUtilizationAvailableMemoryState 1.3.6.1.4.1.6141.2.60.12.1.13.7 integer read-only
Current state of the available memory. Enumeration: 'faulted': 4, 'degraded': 3, 'warning': 2, 'normal': 1.
           wwpLeosSystemGuardian 1.3.6.1.4.1.6141.2.60.12.1.14
                 wwpLeosSystemGuardianAdminEnable 1.3.6.1.4.1.6141.2.60.12.1.14.1 integer read-write
Sets the admin state for the system guardian. A reboot is required for changes to take effect Enumeration: 'enable': 1, 'disable': 2.
                 wwpLeosSystemGuardianOperEnable 1.3.6.1.4.1.6141.2.60.12.1.14.2 integer read-only
Displays the current guardian operational state. Enumeration: 'enable': 1, 'suspended': 3, 'disable': 2.
                 wwpLeosSystemGuardianLimitNumReboots 1.3.6.1.4.1.6141.2.60.12.1.14.3 integer read-write
limits the number of consecutive guardian reboots to 3 if set to on. Enumeration: 'on': 1, 'off': 2.
                 wwpLeosSystemGuardianConsecutiveReboots 1.3.6.1.4.1.6141.2.60.12.1.14.4 integer32 read-only
The current number of consecutive guardian reboots
                 wwpLeosSystemGuardianTotalReboots 1.3.6.1.4.1.6141.2.60.12.1.14.5 integer32 read-only
The total number of guardian reboots.
           wwpLeosSystemServers 1.3.6.1.4.1.6141.2.60.12.1.15
                 wwpLeosSystemSftpServerAdminState 1.3.6.1.4.1.6141.2.60.12.1.15.1 integer read-write
Sets the admin state for the SFTP server Enumeration: 'enable': 1, 'disable': 2.
       wwpLeosSystemConfigMIBNotificationPrefix 1.3.6.1.4.1.6141.2.60.12.2
           wwpLeosSystemConfigMIBNotifications 1.3.6.1.4.1.6141.2.60.12.2.0
               wwpLeosImproperCmdInConfigFile 1.3.6.1.4.1.6141.2.60.12.2.0.1
A wwpLeosImproperCmdInConfigFile notif signifies that the SNMP entity, acting in an agent role, has counted the number of improper commands that were found in the configuration file while processing the wwpLeosSystemConfigFileName
               wwpLeosSystemServiceModeChange 1.3.6.1.4.1.6141.2.60.12.2.0.2
A wwpLeosSystemServiceModeChange notification will be sent out whenever someone changes the system service mode between mpls and pbt.
               wwpLeosSystemMemoryStatusNotification 1.3.6.1.4.1.6141.2.60.12.2.0.3
A wwpLeosSystemMemoryStatusNotification notification will be sent out whenever the system memory is below threshold limit.
               wwpLeosImproperCmdInConfigLineString 1.3.6.1.4.1.6141.2.60.12.2.0.4
A wwpLeosImproperCmdInConfigLineString notif signifies that the SNMP entity, acting in an agent role, has detected that improper commands were found in the configuration file while processing the wwpLeosSystemConfigFileName. wwpLeosSystemConfigErrStr will specify the commands which failed with the line number.
               wwpLeosSystemCpuUtilization5SecondStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.5
The wwpLeosSystemCpuUtilizationStatusTrap is sent out when the 5 second CPU utilization changes states.
               wwpLeosSystemCpuUtilization10SecondStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.6
The wwpLeosSystemCpuUtilization10SecondStatusTrap is sent out when the 10 second CPU utilization changes states.
               wwpLeosSystemCpuUtilization60SecondStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.7
The wwpLeosSystemCpuUtilizationStatusTrap is sent out when the 60 second CPU utilization changes states.
               wwpLeosSystemCpu1MinLoadStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.8
The wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over one minute changes states.
               wwpLeosSystemCpu5MinLoadStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.9
The wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over five minutes changes states.
               wwpLeosSystemCpu15MinLoadStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.10
The wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over fifteen minutes changes states.
               wwpLeosSystemMemoryUtilizationStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.11
The wwpLeosSystemMemoryUtilizationStatusTrap is sent out when the memory utilization changes states.
               wwpLeosSystemFileSystemUtilizationTmpStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.12
The wwpLeosSystemFileSystemUtilizationTmpStatusTrap is sent out when the usage of '/tmp/' changes states.
               wwpLeosSystemFileSystemUtilizationSysfsStatusTrap 1.3.6.1.4.1.6141.2.60.12.2.0.13
The wwpLeosSystemFileSystemUtilizationSysfsStatusTrap is sent out when the usage of '/mnt/sysfs/' changes states.
       wwpLeosSystemConfigMIBConformance 1.3.6.1.4.1.6141.2.60.12.3
           wwpLeosSystemConfigCompliances 1.3.6.1.4.1.6141.2.60.12.3.1
               wwpLeosDefaultGatewayCompliance 1.3.6.1.4.1.6141.2.60.12.3.1.1
The compliance statement of wwpLeosSystemConfigAttr.
               wwpLeosBackupGatewayCompliance 1.3.6.1.4.1.6141.2.60.12.3.1.2
The compliance statement of wwpLeosSystemConfigAttr.
           wwpLeosSystemConfigMIBGroups 1.3.6.1.4.1.6141.2.60.12.3.2
               wwpLeosDefaultGatewayIPv6Group 1.3.6.1.4.1.6141.2.60.12.3.2.1
System config default gateway objects for supporting IPv6.
               wwpLeosBackupGatewayIPv6Group 1.3.6.1.4.1.6141.2.60.12.3.2.2
System config backup gateway objects for supporting IPv6.