WWP-LEOS-MULTICAST-FILTER-MIB: View SNMP OID List / Download MIB

VENDOR: WORLD WIDE PACKETS


 Home MIB: WWP-LEOS-MULTICAST-FILTER-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, WWP-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wwpLeosMcastFilterMIB 1.3.6.1.4.1.6141.2.60.7
This MIB specifies the managed objects for Multicast filter specific to the WWP Products.
     wwpLeosMcastFilterMIBObjects 1.3.6.1.4.1.6141.2.60.7.1
         wwpLeosMcastFilterConfig 1.3.6.1.4.1.6141.2.60.7.1.1
             wwpLeosMcastConfigState 1.3.6.1.4.1.6141.2.60.7.1.1.1 integer read-write
Setting this object will enable or disable multicast globally. Enumeration: 'disabled': 2, 'enabled': 1.
             wwpLeosMcastFilterActivationTable 1.3.6.1.4.1.6141.2.60.7.1.1.2 no-access
The (conceptual) table listing the vlans on which the multicast filter can be applied. This table is used to create and delete entries in the multicast table and also to administratively enable/disable. To configure the IGMP Snooping on this VLAN use table wwpLeosMcastIgmpSnoopTable after creating entry in this (wwpLeosMcastFilterActivationTable) table.
                 wwpLeosMcastFilterActivationEntry 1.3.6.1.4.1.6141.2.60.7.1.1.2.1 no-access
An entry (conceptual row) in the wwpLeosMcastFilterActivationTable.
                     wwpLeosMcastVlanId 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.1 vlanid read-only
The VLAN for which this multicast filter can be enabled/disabled.
                     wwpLeosMcastFilterAdminState 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.2 integer read-write
Setting this object to enable will enable multicast on then given VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                     wwpLeosMcastFilterOperState 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.3 integer read-only
The object represents the operational state of multicast on the given VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                     wwpLeosMcastFilterState 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.4 rowstatus read-only
Setting this object to createandgo(4) will create an entry in the multicast table for the given VLAN and will enable multicast on that VLAN. Setting this object to destroy will delete the entry from the multicast table.
             wwpLeosMcastFilterServerPortTable 1.3.6.1.4.1.6141.2.60.7.1.1.3 no-access
The (conceptual) table listing the authorized server ports.
                 wwpLeosMcastFilterServerPortEntry 1.3.6.1.4.1.6141.2.60.7.1.1.3.1 no-access
An entry (conceptual row) in the wwpLeosMcastFilterServerPortTable.
                     wwpLeosMcastServerPortId 1.3.6.1.4.1.6141.2.60.7.1.1.3.1.1 integer32 read-only
The server port from which the IGMP query messages can be received, and joins/leaves messages can be sent.
                     wwpLeosMcastServerPortStatus 1.3.6.1.4.1.6141.2.60.7.1.1.3.1.2 rowstatus read-only
This object is used to add/delete server ports from the list of authorized server ports. To add a port to the authorized server port list, a user must set this object to 'createAndGo'.
             wwpLeosMcastIgmpSnoopTable 1.3.6.1.4.1.6141.2.60.7.1.1.4 no-access
The (conceptual) table listing the configuration parameters for the IGMP snooping.
                 wwpLeosMcastIgmpSnoopEntry 1.3.6.1.4.1.6141.2.60.7.1.1.4.1 no-access
An entry (conceptual row) in the wwpLeosMcastIgmpSnoopTable.
                     wwpLeosMcastIgmpSnoopEnable 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.1 truthvalue read-write
For LEOS (4.x) IGMP snooping can be enabled on this VLAN by setting this object to 'true'. The Management station should define the router IP address range and the list of server ports before snooping is enabled. SAOS (6.x) does not support setting IGMP snooping per VLAN. Instead it should be enabled globally using the wwpLeosMcastSnoopState MIB object
                     wwpLeosMcastIgmpSnoopRobustness 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.2 integer32 read-write
The number of replies to send for each multicast group.
                     wwpLeosMcastIgmpSnoopProxyQueryInterval 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.3 integer32 read-write
The interval period between each general query sent to the router. This parameter specifies how often to repeat the group specific query. Default will be 125 seconds. Note that the actual rate may be slower when the switch becomes busy, so this parameter should be thought of as a minimum time interval.
                     wwpLeosMcastIgmpSnoopProxyQueryReplyTmo 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4 integer32 read-write
The amount of time to receive a membership report after a query message was sent. This value goes directly into the query packet.
                     wwpLeosMcastIgmpSnoopProxyQueryDelay 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.5 integer32 read-write
The amount of time to wait before sending the next group specific query downstream. General queries are sent one port at a time.
                     wwpLeosMcastIgmpSnoopLingerTmo 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.6 integer32 read-write
This value specifies the amount of time that a multicast filter will be in place after the last host has left. In essence it configures how long to filter the stream after all the hosts have left the group. This can tune the system as to how long the router has to remove the stream from the subnet. The minimum value is 1 second, with no maximum value.
                     wwpLeosMcastIgmpQueryEngineState 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.7 integer read-write
Setting this object to disable will enable query engine on a given VLAN. Setting it to enable will enable it. Enumeration: 'enable': 2, 'disable': 1.
                     wwpLeosMcastIgmpProxyQuerySrcIp 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.8 ipaddress read-write
Setting this object will set the source ip address for the VLAN.
                     wwpLeosMcastIgmpRouterQueryInterval 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.9 integer32 read-write
Setting this object will set the router query interval for given VLAN.
                     wwpLeosMcastIgmpMinResponseTime 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.10 integer32 read-write
Setting this object will set the minimum response time for given VLAN.
                     wwpLeosMcastIgmpDefaultRouterPort 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.11 integer32 read-write
Setting this object will set the default router port for given VLAN.
                     wwpLeosMcastIgmpInquisitiveLeaveState 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.12 integer read-write
Setting this object will set the IGMP inquisitive leave state for given VLAN. Enumeration: 'enable': 2, 'disable': 1.
                     wwpLeosMcastIgmpLastMemberQueryInterval 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.13 integer32 read-write
Setting this object will set the last membership query interval for given VLAN.
                     wwpLeosMcastIgmpPriority 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.14 integer32 read-write
Setting this object will set the priority if IGMP packets for this VLAN.
                     wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.15 ipaddress read-write
The first IP Address of the router IP Address range.
                     wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16 ipaddress read-write
The last IP Address of the router IP Address range. When range is undefined, all leave/join messages will be forwarded to the router even when the multicast stream does not originate from the router. If the range is defined, leave/join messages will be filtered. The default value for this object should be equal to the value of wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr.
                     wwpLeosMcastIgmpSnoopActiveLingerTimeout 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.17 integer32 read-write
The object specifies the active linger timeout in seconds.
                     wwpLeosMcastIgmpSnoopServerTopology 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.18 integer read-write
The object specifies the server topology. Enumeration: 'distributed': 2, 'centralized': 1.
                     wwpLeosMcastIgmpSnoopRapidRecoveryMode 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.19 integer read-write
Specifies whether the rapid recovery mode is set to on or off. If this object is set to ON then device will generate and accept query packets with src IP = 0 else in the OFF state, it would not. Enumeration: 'on': 1, 'off': 2.
             wwpLeosMcastChannelStreamTable 1.3.6.1.4.1.6141.2.60.7.1.1.5 no-access
The (conceptual) table listing the configuration parameters for the multicast channel stream.
                 wwpLeosMcastChannelStreamEntry 1.3.6.1.4.1.6141.2.60.7.1.1.5.1 no-access
An entry (conceptual row) in the wwpLeosMcastChannelStreamTable.
                     wwpLeosMcastChanelStreamStartGroupAddr 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.1 ipaddress read-only
The first IP Address of the multicast IP Address range.
                     wwpLeosMcastChanelStreamEndGroupAddr 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.2 ipaddress read-write
The last IP Address of the multicast IP address range. If range does not need to be specified then do not set this value.
                     wwpLeosMcastChannelStreamStatus 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.3 rowstatus read-only
This object is used to add/delete multicast groups to the channel stream. To add a multicast group to the channel stream, a user must set this object to 'createAndGo'. Device will not allow to create entry unless 'wwpLeosMcastChanelStreamStartGroupAddr' is specified. If range needs to be specified then set 'wwpLeosMcastChanelStreamEndGroupAddr' with the desired group address. If device cannot create entry for any of the IP addresses within the range then no entry will be created and an error will be returned.
             wwpLeosMcastFilterConfigTable 1.3.6.1.4.1.6141.2.60.7.1.1.6 no-access
The (conceptual) table listing the vlans on which the UPF can be applied.
                 wwpLeosMcastFilterConfigEntry 1.3.6.1.4.1.6141.2.60.7.1.1.6.1 no-access
An entry (conceptual row) in the wwpLeosMcastFilterConfigTable.
                     wwpLeosMcastFilterUPFActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.1 truthvalue read-write
UPF can be enabled on this VLAN by setting this object to 'true'.
                     wwpLeosMcastUnresolvedAction 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.2 integer read-write
Setting this object to 'flood' will cause the device to flood all the unresolved messages to all the ports in the VLAN. Setting this object to 'drop' will cause the device to drop all the unresolved messages. If an IGMP join is received with a matching multicast group address, the multicast stream will forward to the corresponding port. Enumeration: 'flood': 1, 'drop': 2.
                     wwpLeosMcastFilterWKMFLocalActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.3 integer read-write
Setting the object to flood will enable flooding of local WKMF on a VLAN. Setting the object to drop will enable dropping of local WKMF on a VLAN. Multicast address belonging to this object is 224.0.0.x. Enumeration: 'flood': 1, 'drop': 2.
                     wwpLeosMcastFilterWKMFInternetActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.4 integer read-write
Setting the object to flood will enable flooding of internet WKMF on a VLAN. Setting the object to drop will enable dropping of internet WKMF on a VLAN. Multicast address belonging to this object is 224.0.1.x. Enumeration: 'flood': 1, 'drop': 2.
                     wwpLeosMcastFilterWKMFAdhocActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.5 integer read-write
Setting the object to flood will enable flooding of adhoc WKMF on a VLAN. Setting the object to drop will enable dropping of adhoc WKMF on a VLAN. Multicast address belonging to this object is 224.0.2.x to 224.0.255.x. Enumeration: 'flood': 1, 'drop': 2.
                     wwpLeosMcastFilterWKMFStMulticastActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.6 integer read-write
Setting the object to flood will enable flooding of st-multicast WKMF on a VLAN. Setting the object to drop will enable dropping of st-multicast WKMF on a VLAN. Multicast address belonging to this object is 224.1.x.x. Enumeration: 'flood': 1, 'drop': 2.
                     wwpLeosMcastFilterWKMFSdpSapActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.7 integer read-write
Setting the object to flood will enable flooding of sdp-sap WKMF on a VLAN. Setting the object to drop will enable dropping of sdp-sap WKMF on a VLAN. Multicast address belonging to this object is 224.2.x.x. Enumeration: 'flood': 1, 'drop': 2.
             wwpLeosMcastChannelStreamExPortMemTable 1.3.6.1.4.1.6141.2.60.7.1.1.7 no-access
The (conceptual) table listing the excluded port list per VLAN for channel stream.
                 wwpLeosMcastChannelStreamExPortMemEntry 1.3.6.1.4.1.6141.2.60.7.1.1.7.1 no-access
An entry (conceptual row) in the wwpLeosMcastChannelStreamExPortMemTable.
                     wwpLeosMcastChannelStreamExPortId 1.3.6.1.4.1.6141.2.60.7.1.1.7.1.1 integer32 read-only
The port num to be excluded from channel stream.
                     wwpLeosMcastChannelStreamExPortMemStatus 1.3.6.1.4.1.6141.2.60.7.1.1.7.1.2 rowstatus read-only
Setting this object to createAndGo will add wwpLeosMcastVlanId and wwpLeosMcastChannelStreamExPortId in the excluded port list of channel stream. Setting this to destroy will remove the wwpLeosMcastVlanId, wwpLeosMcastChannelStreamExPortId membership from excluded port list.
             wwpLeosMcastSnoopState 1.3.6.1.4.1.6141.2.60.7.1.1.8 truthvalue read-write
Setting this object will enable or disable IGMP Snooping globally on SAOS (6.x). LEOS (4.x) does not support setting IGMP snooping at a global level. It should be enabled on a per VLAN bases using the wwpLeosMcastIgmpSnoopEnable MIB object
             wwpLeosMcastGlobalStatsClear 1.3.6.1.4.1.6141.2.60.7.1.1.10 integer read-write
Setting this object to clear will clear the statistics for all the Multicast-Service filter entries. We cannot set the object to none. It is for display purpose only. Enumeration: 'clear': 1, 'none': 2.
         wwpLeosMcastFilterStatus 1.3.6.1.4.1.6141.2.60.7.1.2
             wwpLeosMcastGroupTable 1.3.6.1.4.1.6141.2.60.7.1.2.1 no-access
The (conceptual) table listing all the multicast groups.
                 wwpLeosMcastGroupEntry 1.3.6.1.4.1.6141.2.60.7.1.2.1.1 no-access
An entry (conceptual row) in the wwpLeosMcastGroupTable.
                     wwpLeosMcastGroupAddr 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.1 ipaddress read-only
The multicast group IP address.
                     wwpLeosMcastState 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.2 integer read-only
The current state of the multicast stream. Enumeration: 'active': 1, 'query': 2, 'linger': 3.
                     wwpLeosMcastType 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.3 integer read-only
The type of the multicast stream. Enumeration: 'dynamic': 2, 'static': 1.
                     wwpLeosMcastSource 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.4 integer read-only
The source for this multicast stream. Enumeration: 'router': 1, 'server': 2.
                     wwpLeosMcastMemberCount 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.5 counter32 read-only
The number of ports that joined the group.
             wwpLeosMcastGroupMemberTable 1.3.6.1.4.1.6141.2.60.7.1.2.2 no-access
The (conceptual) table listing all the port members of the multicast groups.
                 wwpLeosMcastGroupMemberEntry 1.3.6.1.4.1.6141.2.60.7.1.2.2.1 no-access
An entry (conceptual row) in the wwpLeosMcastGroupMemberTable.
                     wwpLeosMcastPortId 1.3.6.1.4.1.6141.2.60.7.1.2.2.1.1 integer32 read-only
The router port from which the IGMP query messages are received, and joins/leaves messages are sent.
                     wwpLeosMcastPortTagId 1.3.6.1.4.1.6141.2.60.7.1.2.2.1.2 integer32 read-only
The Virtual Lan Tag Id used by the port on this Virtual Lan. If the switch is being used as a traditional Layer 2 device, then the value of this object should be same as wwpLeosMcastVlanId.
         wwpLeosMcastFilterStats 1.3.6.1.4.1.6141.2.60.7.1.3
             wwpLeosMcastFilterStatsTable 1.3.6.1.4.1.6141.2.60.7.1.3.1 no-access
The (conceptual) table listing the multicast statistics.
                 wwpLeosMcastFilterStatsEntry 1.3.6.1.4.1.6141.2.60.7.1.3.1.1 no-access
An entry (conceptual row) in the wwpLeosMcastFilterServerTable.
                     wwpLeosMcastStaticGrpCount 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.1 integer32 read-only
The total number of static multicast groups.
                     wwpLeosMcastDynamicGrpCount 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.2 integer32 read-only
The total number of dynamic mcast groups.
                     wwpLeosMcastJoinMessages 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.3 counter32 read-only
The total number of join messages received.
                     wwpLeosMcastLeaveMessages 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.4 counter32 read-only
The total number of leave messages received.
                     wwpLeosMcastQueryMessages 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.5 counter32 read-only
The total number of queries received.
                     wwpLeosMcastQueryDiscards 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.6 counter32 read-only
The total number of queries discarded.
                     wwpLeosMcastQueryTimeouts 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.7 counter32 read-only
The total number of timeouts waiting for the router to send query.
                     wwpLeosMcastUnknownPktType 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.8 counter32 read-only
The total number of unknown (unknown type ) IGMP packets received.
                     wwpLeosMcastRouterDiscards 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.9 counter32 read-only
The total number of messages discarded by the router. This happens when join comes in from a router port.
                     wwpLeosMcastHostDiscards 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.10 counter32 read-only
The total number of messages discarded by the host. This happens when a join/leave comes in a port, but no router port is established.
                     wwpLeosMcastBadChecksum 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.11 counter32 read-only
The total number of packets received with bad IP checksum.
                     wwpLeosMcastL2L3Mismatch 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.12 counter32 read-only
The total number of IGMP Layer2 / Layer 3 mismatch packets received.
                     wwpLeosMcastTotalMembers 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.13 counter32 read-only
The total number of group members for all groups in the given VLAN.
                     wwpLeosMcastLingerCount 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.14 counter32 read-only
The total number of groups in linger state.
                     wwpLeosMcastRouterSrcMacAddr 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.15 macaddress read-only
Specifies the router's MAC address.
                     wwpLeosMcastRouterSrcIpAddr 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.16 ipaddress read-only
Specifies the router's IP address.
                     wwpLeosMcastRouterPortId 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.17 integer32 read-only
Specifies the port from where router queries are coming.
                     wwpLeosMcastReportSendPortId 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.18 integer32 read-only
The new value is the port number of the port where IGMP reports will be sent. Not always the same as the router port.
                     wwpLeosMcastStatsClear 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.19 integer read-write
Setting this object to clear will clear the statistics for only the associated VlanId. We cannot set this object to none, it is for display purpose only. Enumeration: 'clear': 1, 'none': 2.
                     wwpLeosMcastStatsQuerySrcIpZeroDiscard 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.20 counter32 read-only
Specifies the number of Queries discarded with Zero source IP in them
     wwpLeosMcastFilterMIBNotificationPrefix 1.3.6.1.4.1.6141.2.60.7.2
         wwpLeosMcastFilterMIBNotifications 1.3.6.1.4.1.6141.2.60.7.2.0
             wwpLeosMcastAddrOverlapNotification 1.3.6.1.4.1.6141.2.60.7.2.0.1
A wwpLeosMcastAddrOverlapNotification is sent whenever several multicast IP addresses overlap (matches the same L2 address).
     wwpLeosMcastFilterMIBConformance 1.3.6.1.4.1.6141.2.60.7.3
         wwpLeosMcastFilterMIBCompliances 1.3.6.1.4.1.6141.2.60.7.3.1
         wwpLeosMcastFilterMIBGroups 1.3.6.1.4.1.6141.2.60.7.3.2