WS-SW-MSTP-MIB: View SNMP OID List / Download MIB

VENDOR: SYMBOL TECHNOLOGIES


 Home MIB: WS-SW-MSTP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wsSwMstp 1.3.6.1.4.1.388.14.2.14
Symbol MIB for MSTP
       wsSwMstpGen 1.3.6.1.4.1.388.14.2.14.10
             wsSwMstpGenMaxHops 1.3.6.1.4.1.388.14.2.14.10.14 integer read-write
Specifies the maximum allowed hops for a BPDU in an MST region. This parameter is used by all the instances of the MST.
             wsSwMstpVersionsSupported 1.3.6.1.4.1.388.14.2.14.10.19 bits read-only
An indication of wheter the Bridge supports Spanning Tree Protocol. The bit nonStp(0) indicates, the Bridge doesn't support any Spanning Tree Protocol. The bit 'dot1d1998(1)' indicates the Spanning Tree Protocol specified in EEE 802.1D-1998, 'dot1w(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE Std 802.1w, 'dot1d2004' indicates IEEE Std 802.1D-2004 and 'dot1s(4) means MSTP IEEE Std 802.1s. When the bridge supprts a non-listed version, the bit unknown(15) should be set. Bits: 'dot1w': 2, 'reserved14': 14, 'dot1s': 4, 'reserved10': 10, 'dot1q': 5, 'reserved12': 12, 'reserved13': 13, 'unknown': 15, 'dot1d2004': 3, 'reserved7': 7, 'reserved9': 9, 'reserved8': 8, 'reserved11': 11, 'nonStp': 0, 'reserved6': 6, 'dot1d1998': 1.
             wsSwMstpGenProtocolVersion 1.3.6.1.4.1.388.14.2.14.10.20 integer read-write
This object is relevant if the Bridges that can supply a number of versions of STP. For GET operation this object reflects the mode in which the Bridge works currently. If the Bridge works currently in the version, not listed here, the value unknown(4) must be returned. For SET operation the value unknown(15) must be rejected. Another value may be rejected too if the Bridge does not support correspond mode (see wsSwMstpVersionsSupported). The value forceNonStp(0) indicates, the Spanning Tree Protocol is disabled on the Bridge (or the Spanning Tree Protocol Emulation operates). Other possible values are described in IEEE Std 802.1s clause 12.8.1.3.e) Enumeration: 'forceDot1w': 2, 'unknown': 15, 'forceLegacyDot1d': 1, 'autoDot1s': 3, 'forceNonStp': 0.
             wsSwMstpGenCfgIdFmtSel 1.3.6.1.4.1.388.14.2.14.10.30 integer32 read-only
Configuration Identificator Format Selector.
             wsSwMstpGenCfgIdName 1.3.6.1.4.1.388.14.2.14.10.31 displaystring read-write
The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier.
             wsSwMstpGenCfgIdRevLevel 1.3.6.1.4.1.388.14.2.14.10.32 integer read-write
This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier.
             wsSwMstpGenCfgIdDigest 1.3.6.1.4.1.388.14.2.14.10.33 octet string read-only
The computed Configuration Digest.
             wsSwMstpGenRegionalRoot 1.3.6.1.4.1.388.14.2.14.10.36 bridgeid read-only
Regional root of the CIST.
             wsSwMstpGenExternalRootCost 1.3.6.1.4.1.388.14.2.14.10.37 integer32 read-only
External root cost of CIST.
             wsSwMstpErrdisableTimeout 1.3.6.1.4.1.388.14.2.14.10.50 truthvalue read-write
The BPDU guard feature shuts down the port on receiving a BPDU on a BPDU-guard enabled port. This object associates a timer with the feature such that the port gets enabled back without manual intervention after a set interval. This interval can be configured by the user using object wsSwMstpErrdisableTimeoutInterval
             wsSwMstpErrdisableTimeoutInterval 1.3.6.1.4.1.388.14.2.14.10.51 integer32 read-write
Specifies the time interval in seconds after which a port for which wsSwMstpErrdisableTimeout is true, is brought back up.
             wsSwMstpPortfastBpduFilter 1.3.6.1.4.1.388.14.2.14.10.52 truthvalue read-write
Enabling the BPDU Filter feature ensures that PortFastenabled ports (edge ports for which dot1dStpPortOperEdgePort is true) do not transmit or receive any BPDUs
             wsSwMstpPortFastBpduGuard 1.3.6.1.4.1.388.14.2.14.10.53 truthvalue read-write
When the BPDU Guard feature is set for a bridge, all portfast-enabled ports (edge ports for which dot1dStpPortOperEdgePort is true) of the bridge that have bpdu-guard set to default shut down the port on receiving a BPDU. In this case, the BPDU is not processed.
             wsSwMstpAdminCiscoInteroperability 1.3.6.1.4.1.388.14.2.14.10.54 truthvalue read-write
Enabled interoperability with Cisco's version of MSTP
             wsSwMstpOperCiscoInteroperability 1.3.6.1.4.1.388.14.2.14.10.55 integer32 read-only
The operational value of the Cisco interoperability parameter. True if Cisco interoperability is administratively enabled and a Cisco BPDU is detected.
             wsSwMstpGlobalState 1.3.6.1.4.1.388.14.2.14.10.56 integer read-write
The global state of MSTP in the switch. The possible states are enabled, disabled and disabledWithBridgeForward Enumeration: 'disabled': 2, 'enabled': 1.
       wsSwMstMapTable 1.3.6.1.4.1.388.14.2.14.11 no-access
This table contains one entry for each instance of MSTP.
             wsSwMstMapEntry 1.3.6.1.4.1.388.14.2.14.11.1 no-access
A conceptual row containing the status of the MSTP instance.
                 wsSwMstMapIndex 1.3.6.1.4.1.388.14.2.14.11.1.1 mstiorcistinstanceindex read-only
Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. However, a SET operation at the CIST index returns an error.
                 wsSwMstMapVlans1k 1.3.6.1.4.1.388.14.2.14.11.1.6 octet string read-write
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.
                 wsSwMstMapVlans2k 1.3.6.1.4.1.388.14.2.14.11.1.7 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.
                 wsSwMstMapVlans3k 1.3.6.1.4.1.388.14.2.14.11.1.8 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.
                 wsSwMstMapVlans4k 1.3.6.1.4.1.388.14.2.14.11.1.9 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.
       wsSwMstVlanTable 1.3.6.1.4.1.388.14.2.14.12 no-access
This table contains one entry for each VlanId.
             wsSwMstVlanEntry 1.3.6.1.4.1.388.14.2.14.12.1 no-access
Information regarding the instance to which each Vlan is mapped.
                 wsSwMstVlanIndex 1.3.6.1.4.1.388.14.2.14.12.1.1 vlanid read-only
The VlanId for which this entry contains the instance mapped.
                 wsSwMstVlanMstIndex 1.3.6.1.4.1.388.14.2.14.12.1.2 mstiorcistinstanceindex read-only
An integer with values ranging from 0 to 16 that identify the CIST/MSTI instance to which this VLAN is mapped
       wsSwMstpPortTable 1.3.6.1.4.1.388.14.2.14.13 no-access
A table that contains generic information about every port that is associated with this bridge.
             wsSwMstpPortEntry 1.3.6.1.4.1.388.14.2.14.13.1 no-access
A list of information for each port of the bridge.
                 wsSwMstpPortIndex 1.3.6.1.4.1.388.14.2.14.13.1.1 portindex read-only
A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
                 wsSwMstpPortAdminMACEnable 1.3.6.1.4.1.388.14.2.14.13.1.2 truthvalue read-write
The value of the MAC Enabled parameter (6.4.2 of IEEE Std 802.1D, 1998 Edition). May be present if the implementation supports the MAC Enabled parameter.
                 wsSwMstpPortOperMACEnable 1.3.6.1.4.1.388.14.2.14.13.1.3 truthvalue read-only
The operational value of the MAC Enabled parameter (6.4.2 of IEEE Std 802.1D, 1998 Edition). May be present if the implementation supports the MAC Enabled parameter.
                 wsSwMstpPortAutoEdge 1.3.6.1.4.1.388.14.2.14.13.1.9 truthvalue read-write
Optional and provided only by MSTP Bridges that support the automatic identification of edge ports.
                 wsSwMstpPortDesignatedBridge 1.3.6.1.4.1.388.14.2.14.13.1.14 bridgeid read-only
The designated bridge for this port
                 wsSwMstpPortGuardRoot 1.3.6.1.4.1.388.14.2.14.13.1.50 truthvalue read-write
If set to true, makes sure that the port on which it is enabled is a designated port. If the Root Guard enabled port receives a superior BPDU, it goes to a discarding state.
                 wsSwMstpAdminPortPortfastBpduFilter 1.3.6.1.4.1.388.14.2.14.13.1.51 integer read-write
Enabling the Port BPDU Filter feature ensures that PortFastenabled ports (edge ports for which dot1dStpPortOperEdgePort is true) do not transmit or receive any BPDUs. When set to enabled or disabled, this configuration takes precedence over wsSwMstpPortfastBpduFilter. However, when setto default, the bridge level BPDU-filter configuration takes effect for the port. Enumeration: 'disabled': 1, 'default': 2, 'enabled': 0.
                 wsSwMstpOperPortPortfastBpduFilter 1.3.6.1.4.1.388.14.2.14.13.1.52 truthvalue read-only
The operational value for Portfast BPDU Filter for this port
                 wsSwMstpAdminPortPortfastBpduGuard 1.3.6.1.4.1.388.14.2.14.13.1.53 integer read-write
When the BPDU Guard feature is set for a bridge, all portfast-enabled ports (edge ports for which dot1dStpPortOperEdgePort is true) of the bridge that have bpdu-guard set to default shut down the port on receiving a BPDU. In this case, the BPDU is not processed. When set to enabled or disabled, this configuration takes precedence over wsSwMstpPortfastBpduGuard. However, when setto default, the bridge level BPDU-guard configuration takes effect for the port. Enumeration: 'disabled': 1, 'default': 2, 'enabled': 0.
                 wsSwMstpOperPortPortfastBpduGuard 1.3.6.1.4.1.388.14.2.14.13.1.54 truthvalue read-only
The operational value for Portfast BPDU guard for this port
                 wsSwMstpPortVersion 1.3.6.1.4.1.388.14.2.14.13.1.55 integer read-write
The spanning tree version used by BPDU's sent and received on this port Enumeration: 'stp': 0, 'reserved': 1, 'rstp': 2, 'mstp': 3.
       wsSwMstpXstTable 1.3.6.1.4.1.388.14.2.14.14 no-access
A table that contains information about every MST instance on this bridge.
             wsSwMstpXstEntry 1.3.6.1.4.1.388.14.2.14.14.1 no-access
A list of information for each instance on this bridge
                 wsSwMstpXstId 1.3.6.1.4.1.388.14.2.14.14.1.1 mstiorcistinstanceindex read-only
The instance id.
                 wsSwMstpXstBridgePriority 1.3.6.1.4.1.388.14.2.14.14.1.2 integer read-only
Bridge priority, in steps of 4096.
                 wsSwMstpXstBridgeId 1.3.6.1.4.1.388.14.2.14.14.1.3 bridgeid read-only
The bridge ID for this instance
                 wsSwMstpXstDesignatedRoot 1.3.6.1.4.1.388.14.2.14.14.1.4 bridgeid read-only
The designated root for this instance
                 wsSwMstpXstInternalRootCost 1.3.6.1.4.1.388.14.2.14.14.1.6 integer32 read-only
The internal root cost for this instance
                 wsSwMstpXstRootPort 1.3.6.1.4.1.388.14.2.14.14.1.7 portindexorzero read-only
The root port for this instance, if on this bridge.
                 wsSwMstpXstMasterPort 1.3.6.1.4.1.388.14.2.14.14.1.8 portindexorzero read-only
The master port for this instance, if on this bridge. Non zero value may not be in CIST.
                 wsSwMstpXstRowStatus 1.3.6.1.4.1.388.14.2.14.14.1.9 abbrevrowstatus read-only
row status: only createAndGo, destroy, active are supported.
       wsSwMstpXstPortTable 1.3.6.1.4.1.388.14.2.14.15 no-access
A table to manage ports inside instances - both CIST and MSTIs. It contains objects, describing ports and is common for these both types of instances.
             wsSwMstpXstPortEntry 1.3.6.1.4.1.388.14.2.14.15.1 no-access
A list of information for each port in each instance for this bridge.
                 wsSwMstpXstPortXstId 1.3.6.1.4.1.388.14.2.14.15.1.1 mstiorcistinstanceindex read-only
The instance id. 0 means CIST.
                 wsSwMstpXstPortIndex 1.3.6.1.4.1.388.14.2.14.15.1.2 portindex read-only
The value of wsSwMstpPortIndex of the Port in wsSwMstpPortTable.
                 wsSwMstpXstPortState 1.3.6.1.4.1.388.14.2.14.15.1.3 integer read-only
The state the port is in. Enumeration: 'disabled': 0, 'discarding': 1, 'forwarding': 3, 'learning': 2, 'unknown': 4.
                 wsSwMstpXstPortRole 1.3.6.1.4.1.388.14.2.14.15.1.4 integer read-only
The role of this port Enumeration: 'unknown': 8, 'alternate': 2, 'designated': 5, 'disabled': 1, 'master': 6, 'root': 4, 'nonStp': 7, 'backup': 3.
                 wsSwMstpXstPortInternalRootCost 1.3.6.1.4.1.388.14.2.14.15.1.9 integer32 read-only
The internal root path cost for this port in this instance
                 wsSwMstpXstPortDesignatedBridge 1.3.6.1.4.1.388.14.2.14.15.1.10 bridgeid read-only
The designated bridge ID for this port in this instance
                 wsSwMstpXstPortDesignatedPort 1.3.6.1.4.1.388.14.2.14.15.1.14 portid read-only
The designated port id
                 wsSwMstpXstPortPriority 1.3.6.1.4.1.388.14.2.14.15.1.15 integer read-only
Port priority, in steps of 16.
                 wsSwMstpXstPortAdminInternalPathCost 1.3.6.1.4.1.388.14.2.14.15.1.16 integer read-only
The value of the internal path cost. The value 0 means, that the cost will be selected automatically.
                 wsSwMstpXstPortOperInternalPathCost 1.3.6.1.4.1.388.14.2.14.15.1.17 integer32 read-only
The operational value of the internal path cost
       wsSwMstpOptionSupport 1.3.6.1.4.1.388.14.2.14.16
             wsSwMstpOptionPortAdminMACEnable 1.3.6.1.4.1.388.14.2.14.16.1 truthvalue read-only
If this is true, swWsMstpPortAdminMACEnable can be set
             wsSwMstpOptionPortAutoEdge 1.3.6.1.4.1.388.14.2.14.16.2 truthvalue read-only
If this is true wsSwMstpPortAutoEdge can be set
       wsSwMstpConformance 1.3.6.1.4.1.388.14.2.14.100
               wsSwMstpGroups 1.3.6.1.4.1.388.14.2.14.100.1
                   currentObjectGroup 1.3.6.1.4.1.388.14.2.14.100.1.1
OBJECT-GROUP for WS-SW-MSTP-MIB
               wsSwMstpCompliances 1.3.6.1.4.1.388.14.2.14.100.2
                   basicCompliance 1.3.6.1.4.1.388.14.2.14.100.2.1
MODULE-COMPLIANCE for WS-SW-MSTP-MIB