WS-SW-IF-MIB: View SNMP OID List / Download MIB

VENDOR: SYMBOL TECHNOLOGIES


 Home MIB: WS-SW-IF-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, WS-SW-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wsIfModule 1.3.6.1.4.1.388.14.2.4.1
WS IF Module
     wsIfTable 1.3.6.1.4.1.388.14.2.4.1.1 no-access
ws IF table
         wsIfEntry 1.3.6.1.4.1.388.14.2.4.1.1.1 no-access
ws IF table entry
             wsIfHWType 1.3.6.1.4.1.388.14.2.4.1.1.1.1 integer read-only
ws IF hardware type Enumeration: 'loopBack': 2, 'vlan': 3, 'ppp': 6, 'mlt': 5, 'eth': 1, 'gre': 4.
             wsIfNumber 1.3.6.1.4.1.388.14.2.4.1.1.1.2 integer read-only
ws IF number
             wsIfMTU 1.3.6.1.4.1.388.14.2.4.1.1.1.3 integer32 read-only
ws IF MTU, read/write
             wsIfSpeed 1.3.6.1.4.1.388.14.2.4.1.1.1.4 integer read-only
ws IF speed Enumeration: 'tenMbps': 1, 'unknown': 0, 'thousandMbps': 3, 'hundredMbps': 2.
             wsIfAdminSpeed 1.3.6.1.4.1.388.14.2.4.1.1.1.5 integer read-only
ws IF speed, read/write, not applicable in vlan Enumeration: 'tenMbps': 1, 'hundredMbps': 2, 'thousandMbps': 3, 'tenGbps': 5, 'auto': 4.
             wsIfDuplex 1.3.6.1.4.1.388.14.2.4.1.1.1.6 integer read-only
ws IF duplex Enumeration: 'unknown': 0, 'fullDuplex': 2, 'halfDuplex': 1.
             wsIfAdminDuplex 1.3.6.1.4.1.388.14.2.4.1.1.1.7 integer read-only
ws IF duplex, read/write, not applicable in vlan Enumeration: 'auto': 3, 'fullDuplex': 2, 'halfDuplex': 1.
             wsIfDHCPEnable 1.3.6.1.4.1.388.14.2.4.1.1.1.8 truthvalue read-only
ws IF DHCP enable, read/write
             wsIfIndex 1.3.6.1.4.1.388.14.2.4.1.1.1.9 integer32 read-only
if Index number
             wsIfType 1.3.6.1.4.1.388.14.2.4.1.1.1.10 integer read-only
ws if type, specify it is layer 2 or layer 3 interface Enumeration: 'layer3': 2, 'layer2': 1.
             wsIfName 1.3.6.1.4.1.388.14.2.4.1.1.1.11 displaystring read-only
ws if name, a display string
             wsIfRowStatus 1.3.6.1.4.1.388.14.2.4.1.1.1.12 rowstatus read-only
row status, only createAndGo, destroy, active are supported, and only create a vlan is supported
             wsIfDescr 1.3.6.1.4.1.388.14.2.4.1.1.1.13 displaystring read-only
Description.
             wsIfMaxSpeed 1.3.6.1.4.1.388.14.2.4.1.1.1.14 integer read-only
Description. Enumeration: 'tenMBps': 1, 'unknown': 0, 'thousandMBps': 3, 'hundredMBps': 2.
             wsIfMgmtAllowed 1.3.6.1.4.1.388.14.2.4.1.1.1.15 truthvalue read-only
indicates if this interface is available for mgmt port
             wsIfMedType 1.3.6.1.4.1.388.14.2.4.1.1.1.16 integer read-only
the current port medium type Enumeration: 'copper': 2, 'none': 3, 'fiber': 1.
             wsIfMedTypeSupported 1.3.6.1.4.1.388.14.2.4.1.1.1.17 integer read-only
the possilbe option for the current port med type supported Enumeration: 'copper': 2, 'none': 4, 'fiber': 1, 'both': 3.
             wsIfVlanMappingAllowed 1.3.6.1.4.1.388.14.2.4.1.1.1.18 truthvalue read-only
indicate if vlan mapping is allowed on this port
             wsIfStaticLinkAggMembershipAllowed 1.3.6.1.4.1.388.14.2.4.1.1.1.19 truthvalue read-only
This field indicates if this port can become a member of a static link aggregate.
             wsIfStaticLinkAgg 1.3.6.1.4.1.388.14.2.4.1.1.1.20 integer read-only
If non-zero, indicates the static link aggregate this port is a member of.
             wsIfSpeedUtilization 1.3.6.1.4.1.388.14.2.4.1.1.1.21 integer32 read-only
The best estimate of the interface's current bandwidth utilization, in hundredths of a percent.
             wsIfInOctets 1.3.6.1.4.1.388.14.2.4.1.1.1.22 counter64 read-only
The total number of octets received on the interface, including framing characters.
             wsIfInPkts 1.3.6.1.4.1.388.14.2.4.1.1.1.23 counter64 read-only
The number of packets delivered to a higher-layer protocol.
             wsIfOutOctets 1.3.6.1.4.1.388.14.2.4.1.1.1.24 counter64 read-only
The total number of octets transmitted out of the interface, including framing characters.
             wsIfOutPkts 1.3.6.1.4.1.388.14.2.4.1.1.1.25 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted including those that were discarded or not sent.
             wsIfTotalMBytes 1.3.6.1.4.1.388.14.2.4.1.1.1.26 counter64 read-only
The total megabytes received and transmitted on the interface.
             wsIfThroughput 1.3.6.1.4.1.388.14.2.4.1.1.1.27 unsigned32 read-only
The throughput of the interface.
             wsIfUpDownTimes 1.3.6.1.4.1.388.14.2.4.1.1.1.28 unsigned32 read-only
Updown counter.
     wsIfMgmtIfname 1.3.6.1.4.1.388.14.2.4.1.2 displaystring read-write
mgmt interface name of this platform
     wsIfRonIfName 1.3.6.1.4.1.388.14.2.4.1.3 displaystring read-write
Ron interface name of this platform.
     wsIfWlanIfName 1.3.6.1.4.1.388.14.2.4.1.4 displaystring read-write
only applied in whistler
     wsIfMgmtOptions 1.3.6.1.4.1.388.14.2.4.1.5 integer read-only
Describe what choice are available in the current platform. For whistler/monarch, it is vlanOnly(1).For quicksilver, it is both(3) Enumeration: 'phyOnly': 2, 'both': 3, 'vlanOnly': 1.
     wsIfMgmtOptionState 1.3.6.1.4.1.388.14.2.4.1.6 integer read-write
Describe what choice are in effect in the current platform. For whistler/monarch/quicksilver, this attribute is read-only, setting it will get a GEN_ERR response. For whislter/monarch, the value is vlanOnly(1). For quicksilver, the value is both(3) Enumeration: 'phyOnly': 2, 'both': 3, 'vlanOnly': 1.
     wsIfMedDefault 1.3.6.1.4.1.388.14.2.4.1.7 integer read-write
The default medium for the port. Only writable in quick silver. In whislter/monarch, write it will return a GEN_ERR. Enumeration: 'copper': 2, 'none': 3, 'fiber': 1.
     wsIfMedDefaultSupported 1.3.6.1.4.1.388.14.2.4.1.8 integer read-only
the possible option for default med type supported Enumeration: 'copper': 2, 'fiber': 1, 'both': 3.
     wsIfMaxStaticLinkAgg 1.3.6.1.4.1.388.14.2.4.1.9 integer read-only
The maximum number of static link aggregates supported.
     wsIfManagementSecure 1.3.6.1.4.1.388.14.2.4.1.10 truthvalue read-write
When this object is set to true, the management traffic is allowed only through the management port on the switch. When this object is set to false, the management traffic is allowed through any port on the switch.
     wsIfSwitchMacAddress 1.3.6.1.4.1.388.14.2.4.1.11 physaddress read-only
The MAC address of the interface representative of this wireless switch.
     wsIfWirelessWan 1.3.6.1.4.1.388.14.2.4.1.12
           wsIfWirelessWanApName 1.3.6.1.4.1.388.14.2.4.1.12.1 displaystring read-write
Access Point name provided by the Wireless WAN service provider. A value of zero-length string for this object indicates that the Access Point name is not configured.
           wsIfWirelessWanUsername 1.3.6.1.4.1.388.14.2.4.1.12.2 displaystring read-write
Username provided by the Wireless WAN service provider. A value of zero-length string for this object indicates that the username is not configured.
           wsIfWirelessWanPassword 1.3.6.1.4.1.388.14.2.4.1.12.3 displaystring read-write
Password provided by the Wireless WAN service provider. This object is logically write-only. Reading this object will return *s when password is configured and a zero-length string when password is not configured. Writing zero-length string in this object indicates that the password is not configured.
           wsIfWirelessWanAuthType 1.3.6.1.4.1.388.14.2.4.1.12.4 integer read-write
Authentication type used by the switch. none : Not configured pap : PAP chap : CHAP msChap : MS-CHAP msChapV2 : MS-CHAPv2 Enumeration: 'pap': 2, 'msChapV2': 5, 'none': 1, 'msChap': 4, 'chap': 3.
           wsIfWirelessWanEnable 1.3.6.1.4.1.388.14.2.4.1.12.5 truthvalue read-write
Enable or disable Wireless WAN interface. The Wireless WAN configuration objects must have acceptable values to enable the interface.
           wsIfWirelessWanSignalStrength 1.3.6.1.4.1.388.14.2.4.1.12.6 integer32 read-only
The Wireless WAN signal strength. 0 : signal strength unavailable -200..-1 : signal strength in dBm
           wsIfWirelessWanSignalCoverage 1.3.6.1.4.1.388.14.2.4.1.12.7 integer read-only
The Wireless WAN signal coverage. excellent : Excellent coverage good : Good coverage moderate : Moderate coverage weak : Weak coverage noCoverage : No coverage Enumeration: 'noCoverage': 5, 'good': 2, 'weak': 4, 'moderate': 3, 'excellent': 1.
           wsIfWirelessWanDhcpPrimaryDnsServer 1.3.6.1.4.1.388.14.2.4.1.12.8 displaystring read-only
The primary Wireless WAN DNS server obtained via DHCP.
           wsIfWirelessWanDhcpSecondaryDnsServer 1.3.6.1.4.1.388.14.2.4.1.12.9 displaystring read-only
The secondary Wireless WAN DNS server obtained via DHCP.
     wsIfLayer2Count 1.3.6.1.4.1.388.14.2.4.1.13 integer32 read-only
The number of layer-2 network interfaces (regardless of their current state) present on this system.
     wsIfConformance 1.3.6.1.4.1.388.14.2.4.1.100
             wsIfCompliances 1.3.6.1.4.1.388.14.2.4.1.100.1
                 wsIfCompliance 1.3.6.1.4.1.388.14.2.4.1.100.1.1
Description.
             wsIfGroups 1.3.6.1.4.1.388.14.2.4.1.100.2
                 wsIfGroup 1.3.6.1.4.1.388.14.2.4.1.100.2.1
Description.