WS-CC-STATS-MIB: View SNMP OID List / Download MIB
VENDOR: SYMBOL TECHNOLOGIES
Home | MIB: WS-CC-STATS-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
wsCcStatsMIB | 1.3.6.1.4.1.388.14.3.3.1 |
Description. |
||
wsCcStatsConf | 1.3.6.1.4.1.388.14.3.3.1.1 | |||
wsCcStatsConfShortWindow | 1.3.6.1.4.1.388.14.3.3.1.1.1 | integer32 | read-only |
The number of seconds backwards from the specified timestamp that the the 'Short' window extends backwards in time. |
wsCcStatsConfShortUpdateInterval | 1.3.6.1.4.1.388.14.3.3.1.1.2 | integer32 | read-only |
The frequency at which the 'Short' summary stats are updated. |
wsCcStatsConfLongWindow | 1.3.6.1.4.1.388.14.3.3.1.1.3 | integer32 | read-only |
Same as corresponding 'Short' value, for the 'Long' window. |
wsCcStatsConfLongUpdateInterval | 1.3.6.1.4.1.388.14.3.3.1.1.4 | integer32 | read-only |
Same as corresponding 'Short' value, for the 'Long' window. |
wsCcStatsConfReset | 1.3.6.1.4.1.388.14.3.3.1.1.5 | doactionnow | read-write |
Writing this value resets all counters in the ccRf sub-tree except for the ccPortalSystemStatsTable and ccPortalTable |
wsCcStatsRadio | 1.3.6.1.4.1.388.14.3.3.1.2 | |||
wsCcStatsRadioTable | 1.3.6.1.4.1.388.14.3.3.1.2.2 | no-access |
This table describes general statistics about packets sent/recieved via each Portal on the switch. |
|
1.3.6.1.4.1.388.14.3.3.1.2.2.1 | no-access |
|
||
wsCcStatsRadioIndex | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.1 | integer32 | no-access |
Small, arbitrary integer index. |
wsCcStatsRadioTxPktsUcast | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.2 | counter32 | read-only |
Count of unicast packets sent via the Portal. |
wsCcStatsRadioRxPktsUcast | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.3 | counter32 | read-only |
Count of unicast packets received via the Portal. |
wsCcStatsRadioRxPktsNUcast | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.4 | counter32 | read-only |
Count of non-unicast (broadcast & multicast) packets received via the Portal. |
wsCcStatsRadioTxOctetsUcast | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.5 | counter32 | read-only |
Count of unicast octets sent via the Portal. |
wsCcStatsRadioRxOctetsUcast | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.6 | counter32 | read-only |
Count of unicast octets received via the Portal. |
wsCcStatsRadioRxOctetsNUcast | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.7 | counter32 | read-only |
Count of non-unicast (broadcast & multicast) octets received via the Portal. |
wsCcStatsRadioRxUndecryptablePkts | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.8 | counter32 | read-only |
Count of packets received via the Portal that could not be decrypted. |
wsCcStatsRadioLastActivity | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.9 | timeticks | read-only |
A snapshot of the switch's sysUpTime at the time of the last activity (packet sent or received) via the Portal. |
wsCcStatsRadioTxRetriesPacketsFailed | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.10 | counter32 | read-only |
Number of pkts that never were successfully transmitted to via this Portal because the max retry count was exceeded |
wsCcStatsRadioRxErrors | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.11 | counter32 | read-only |
The count of receive errors for this radio. |
wsCcStatsRadioTxRetriesVoicePktsFailed | 1.3.6.1.4.1.388.14.3.3.1.2.2.1.12 | counter32 | read-only |
Number of voice pkts that never were successfully transmitted to via this Portal because the max retry count was exceeded |
wsCcStatsRadioRxPktsTable | 1.3.6.1.4.1.388.14.3.3.1.2.3 | no-access |
For each Portal on the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.2.3.1 | no-access |
|
||
wsCcStatsRadioRxPktsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.1 | counter32 | read-only |
Number of pkts received via this Portal at 1 Mb. |
wsCcStatsRadioRxPktsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.2 | counter32 | read-only |
Number of pkts received via this Portal at 2 Mb. |
wsCcStatsRadioRxPktsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.3 | counter32 | read-only |
Number of pkts received via this Portal at 5.5 Mb. |
wsCcStatsRadioRxPktsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.4 | counter32 | read-only |
Number of pkts received via this Portal at 6 Mb. |
wsCcStatsRadioRxPktsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.5 | counter32 | read-only |
Number of pkts received via this Portal at 9 Mb. |
wsCcStatsRadioRxPktsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.6 | counter32 | read-only |
Number of pkts received via this Portal at 11 Mb. |
wsCcStatsRadioRxPktsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.7 | counter32 | read-only |
Number of pkts received via this Portal at 12 Mb. |
wsCcStatsRadioRxPktsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.8 | counter32 | read-only |
Number of pkts received via this Portal at 18 Mb. |
wsCcStatsRadioRxPktsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.9 | counter32 | read-only |
Number of pkts received via this Portal at 22 Mb. |
wsCcStatsRadioRxPktsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.10 | counter32 | read-only |
Number of pkts received via this Portal at 24 Mb. |
wsCcStatsRadioRxPktsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.11 | counter32 | read-only |
Number of pkts received via this Portal at 36 Mb. |
wsCcStatsRadioRxPktsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.12 | counter32 | read-only |
Number of pkts received via this Portal at 48 Mb. |
wsCcStatsRadioRxPktsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.2.3.1.13 | counter32 | read-only |
Number of pkts received via this Portal at 54 Mb. |
wsCcStatsRadioTxPktsTable | 1.3.6.1.4.1.388.14.3.3.1.2.4 | no-access |
For each Portal on the switch, this table describes counts of packets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.2.4.1 | no-access |
|
||
wsCcStatsRadioTxPktsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.1 | counter32 | read-only |
Number of pkts transmitted via this Portal at 1 Mb. |
wsCcStatsRadioTxPktsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.2 | counter32 | read-only |
Number of pkts transmitted via this Portal at 2 Mb. |
wsCcStatsRadioTxPktsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.3 | counter32 | read-only |
Number of pkts transmitted via this Portal at 5.5 Mb. |
wsCcStatsRadioTxPktsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.4 | counter32 | read-only |
Number of pkts transmitted via this Portal at 6 Mb. |
wsCcStatsRadioTxPktsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.5 | counter32 | read-only |
Number of pkts transmitted via this Portal at 9 Mb. |
wsCcStatsRadioTxPktsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.6 | counter32 | read-only |
Number of pkts transmitted via this Portal at 11 Mb. |
wsCcStatsRadioTxPktsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.7 | counter32 | read-only |
Number of pkts transmitted via this Portal at 12 Mb. |
wsCcStatsRadioTxPktsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.8 | counter32 | read-only |
Number of pkts transmitted via this Portal at 18 Mb. |
wsCcStatsRadioTxPktsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.10 | counter32 | read-only |
Number of pkts transmitted via this Portal at 22 Mb. |
wsCcStatsRadioTxPktsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.11 | counter32 | read-only |
Number of pkts transmitted via this Portal at 24 Mb. |
wsCcStatsRadioTxPktsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.12 | counter32 | read-only |
Number of pkts transmitted via this Portal at 36 Mb. |
wsCcStatsRadioTxPktsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.13 | counter32 | read-only |
Number of pkts transmitted via this Portal at 48 Mb. |
wsCcStatsRadioTxPktsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.2.4.1.14 | counter32 | read-only |
Number of pkts transmitted via this Portal at 54 Mb. |
wsCcStatsRadioRxOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.2.5 | no-access |
For each Portal on this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.2.5.1 | no-access |
|
||
wsCcStatsRadioRxOctetsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.1 | counter32 | read-only |
Number of octets received via this Portal at 1 Mb. |
wsCcStatsRadioRxOctetsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.2 | counter32 | read-only |
Number of octets received via this Portal at 2 Mb. |
wsCcStatsRadioRxOctetsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.3 | counter32 | read-only |
Number of octets received via this Portal at 5.5 Mb. |
wsCcStatsRadioRxOctetsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.4 | counter32 | read-only |
Number of octets received via this Portal at 6 Mb. |
wsCcStatsRadioRxOctetsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.5 | counter32 | read-only |
Number of octets received via this Portal at 9 Mb. |
wsCcStatsRadioRxOctetsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.6 | counter32 | read-only |
Number of octets received via this Portal at 11 Mb. |
wsCcStatsRadioRxOctetsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.7 | counter32 | read-only |
Number of octets received via this Portal at 12 Mb. |
wsCcStatsRadioRxOctetsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.8 | counter32 | read-only |
Number of octets received via this Portal at 18 Mb. |
wsCcStatsRadioRxOctetsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.9 | counter32 | read-only |
Number of octets received via this Portal at 22 Mb. |
wsCcStatsRadioRxOctetsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.10 | counter32 | read-only |
Number of octets received via this Portal at 24 Mb. |
wsCcStatsRadioRxOctetsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.11 | counter32 | read-only |
Number of octets received via this Portal at 36 Mb. |
wsCcStatsRadioRxOctetsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.12 | counter32 | read-only |
Number of octets received via this Portal at 48 Mb. |
wsCcStatsRadioRxOctetsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.2.5.1.13 | counter32 | read-only |
Number of octets received via this Portal at 54 Mb. |
wsCcStatsRadioTxOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.2.6 | no-access |
For each Portal on this switch, this table describes counts of octets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.2.6.1 | no-access |
|
||
wsCcStatsRadioTxOctetsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.1 | counter32 | read-only |
Number octets transmitted via this Portal at 1 Mb. |
wsCcStatsRadioTxOctetsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.2 | counter32 | read-only |
Number octets transmitted via this Portal at 2 Mb. |
wsCcStatsRadioTxOctetsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.3 | counter32 | read-only |
Number octets transmitted via this Portal at 5.5 Mb. |
wsCcStatsRadioTxOctetsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.4 | counter32 | read-only |
Number octets transmitted via this Portal at 6 Mb. |
wsCcStatsRadioTxOctetsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.5 | counter32 | read-only |
Number octets transmitted via this Portal at 9 Mb. |
wsCcStatsRadioTxOctetsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.6 | counter32 | read-only |
Number octets transmitted via this Portal at 11 Mb. |
wsCcStatsRadioTxOctetsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.7 | counter32 | read-only |
Number octets transmitted via this Portal at 12 Mb. |
wsCcStatsRadioTxOctetsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.8 | counter32 | read-only |
Number octets transmitted via this Portal at 18 Mb. |
wsCcStatsRadioTxOctetsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.9 | counter32 | read-only |
Number octets transmitted via this Portal at 22 Mb. |
wsCcStatsRadioTxOctetsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.10 | counter32 | read-only |
Number octets transmitted via this Portal at 24 Mb. |
wsCcStatsRadioTxOctetsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.11 | counter32 | read-only |
Number octets transmitted via this Portal at 36 Mb. |
wsCcStatsRadioTxOctetsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.12 | counter32 | read-only |
Number octets transmitted via this Portal at 48 Mb. |
wsCcStatsRadioTxOctetsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.2.6.1.13 | counter32 | read-only |
Number octets transmitted via this Portal at 54 Mb. |
wsCcStatsRadioTxRetriesPktsTable | 1.3.6.1.4.1.388.14.3.3.1.2.7 | no-access |
For each Portal on the switch, this table describes counts of the number of packets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
|
1.3.6.1.4.1.388.14.3.3.1.2.7.1 | no-access |
|
||
wsCcStatsRadioTxRetriesPktsNone | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.1 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with no retries. |
wsCcStatsRadioTxRetriesPkts01 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.2 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 1 retry. |
wsCcStatsRadioTxRetriesPkts02 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.3 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 2 retries. |
wsCcStatsRadioTxRetriesPkts03 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.4 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 3 retries. |
wsCcStatsRadioTxRetriesPkts04 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.5 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 4 retries. |
wsCcStatsRadioTxRetriesPkts05 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.6 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 5 retries. |
wsCcStatsRadioTxRetriesPkts06 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.7 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 6 retries. |
wsCcStatsRadioTxRetriesPkts07 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.8 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 7 retries. |
wsCcStatsRadioTxRetriesPkts08 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.9 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 8 retries. |
wsCcStatsRadioTxRetriesPkts09 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.10 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 9 retries. |
wsCcStatsRadioTxRetriesPkts10 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.11 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 10 retries. |
wsCcStatsRadioTxRetriesPkts11 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.12 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 11 retries. |
wsCcStatsRadioTxRetriesPkts12 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.13 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 12 retries. |
wsCcStatsRadioTxRetriesPkts13 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.14 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 13 retries. |
wsCcStatsRadioTxRetriesPkts14 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.15 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 14 retries. |
wsCcStatsRadioTxRetriesPkts15 | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.16 | counter32 | read-only |
Number of pkts successfully transmitted via this Portal with exactly 15 retries. |
wsCcStatsRadioTxRetriesPktsFailed | 1.3.6.1.4.1.388.14.3.3.1.2.7.1.17 | counter32 | read-only |
Number of pkts that never were successfully transmitted to via this Portal because the max retry count was exceeded. |
wsCcStatsRadioTxRetriesOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.2.8 | no-access |
For each Portal on the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
|
1.3.6.1.4.1.388.14.3.3.1.2.8.1 | no-access |
|
||
wsCcStatsRadioTxRetriesOctetsNone | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.1 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with no retries. |
wsCcStatsRadioTxRetriesOctets01 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.2 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 1 retry. |
wsCcStatsRadioTxRetriesOctets02 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.3 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 2 retries. |
wsCcStatsRadioTxRetriesOctets03 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.4 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 3 retries. |
wsCcStatsRadioTxRetriesOctets04 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.5 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 4 retries. |
wsCcStatsRadioTxRetriesOctets05 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.6 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 5 retries. |
wsCcStatsRadioTxRetriesOctets06 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.7 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 6 retries. |
wsCcStatsRadioTxRetriesOctets07 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.8 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 7 retries. |
wsCcStatsRadioTxRetriesOctets08 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.9 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 8 retries. |
wsCcStatsRadioTxRetriesOctets09 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.10 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 9 retries. |
wsCcStatsRadioTxRetriesOctets10 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.11 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 10 retries. |
wsCcStatsRadioTxRetriesOctets11 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.12 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 11 retries. |
wsCcStatsRadioTxRetriesOctets12 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.13 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 12 retries. |
wsCcStatsRadioTxRetriesOctets13 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.14 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 13 retries. |
wsCcStatsRadioTxRetriesOctets14 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.15 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 14 retries. |
wsCcStatsRadioTxRetriesOctets15 | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.16 | counter32 | read-only |
Number of octets successfully transmitted via this Portal with exactly 15 retries. |
wsCcStatsRadioTxRetriesOctetsFailed | 1.3.6.1.4.1.388.14.3.3.1.2.8.1.17 | counter32 | read-only |
Number of octets that never were successfully transmitted to via this Portal because the max retry count was exceeded. |
wsCcStatsRadioSigTable | 1.3.6.1.4.1.388.14.3.3.1.2.9 | no-access |
This table describes statistics about RSSI, Signal, Noise, and SNR for packets recieved via each Portal on the switch. |
|
1.3.6.1.4.1.388.14.3.3.1.2.9.1 | no-access |
|
||
wsCcStatsRadioSigNumPkts | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.1 | counter32 | read-only |
Total packets received via the Portal included in all the other counters reported in this row. |
wsCcStatsRadioSigSignalBest | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.2 | integer32 | read-only |
The best Signal value seen from the Portal so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to -500dBm. |
wsCcStatsRadioSigSignalWorst | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.3 | integer32 | read-only |
The worst Signal value seen from the Portal so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to 500dBm. |
wsCcStatsRadioSigSignalSum | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.4 | integer32 | read-only |
A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received via this Portal. Note that this value is normally a negative value ranging from -10dBm to -80dBm. It is possible for this value to be positive, but that would be rare, and would signal an exceptionally strong signal. (This value divided by ccPortalSigStatsNumPkts yields the average Signal value for all packets received from this MU). |
wsCcStatsRadioSigSignalSumSquares | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.5 | counter64 | read-only |
A sum of the squares of each Signal value calculated for packets received via this Portal. Unlike _SignalSum, this value is never negative, since the square of a negative number is a positive. (This value can be used to calculate the standard deviation for Signal values calculated for packets from this Portal). |
wsCcStatsRadioSigSignalMostRecent | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.6 | integer32 | read-only |
The best Signal value seen from the Portal so far. (Remember that a -20dBm Signal is better than -60dBm). This value does not make sense when ccPortalSigStatsNumPkts equals to 0. |
wsCcStatsRadioSigNoiseBest | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.7 | integer32 | read-only |
The best Noise value seen from the Portal so far. (Remember that -80dBm Noise is better than -70dBm). This value is initialized to 500dBm. |
wsCcStatsRadioSigNoiseWorst | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.8 | integer32 | read-only |
The worst Noise value seen from the Portal so far. (Remember that -50dBm Noise is worse than -60dBm). This value is initialized to -500dBm. |
wsCcStatsRadioSigNoiseSum | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.9 | integer32 | read-only |
A running sum of all Noise values calculated by the switch (using reported RSSI values), for packets received via this Portal. Like _SignalSum, this value is normally a negative value. (This value divided by ccPortalSigStatsNumPkts yields the average Noise value for all packets received from this MU). |
wsCcStatsRadioSigNoiseSumSquares | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.10 | counter64 | read-only |
A sum of the squares of each Noise value calculated for packets received via this Portal. As with _SignalSumSquares, this value is never negative. (This value can be used to calculate the standard deviation for Noise values calculated for packets from this Portal). |
wsCcStatsRadioSigNoiseMostRecent | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.11 | integer32 | read-only |
The best Noise value seen from the Portal so far. (Remember that -80dBm Noise is better than -70dBm). This value does not make sense when ccPortalSigStatsNumPkts equals to 0. |
wsCcStatsRadioSigSnrBest | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.12 | integer32 | read-only |
The best SNR value seen from the Portal so far. (Remember that +30dBm SNR is better than +20dBm). This value is initialized to -500dB. |
wsCcStatsRadioSigSnrWorst | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.13 | integer32 | read-only |
The worst SNR value seen from the Portal so far. (Remember that +10dBm SNR is worse than +20dBm). This value is initialized to 500dB. |
wsCcStatsRadioSigSnrSum | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.14 | integer32 | read-only |
A running sum of all SNR values calculated by the switch (using reported RSSI values), for packets received via this Portal. Unlike _Signal and _Noise, this value is never negative. (This value divided by ccPortalSigStatsNumPkts yields the average SNR value for all packets received from this MU). |
wsCcStatsRadioSigSnrSumSquares | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.15 | counter64 | read-only |
A sum of the squares of each SNR value calculated for packets received via this Portal. This value is never negative. (This value can be used to calculate the standard deviation for SNR values calculated for packets from this Portal). |
wsCcStatsRadioSigSnrMostRecent | 1.3.6.1.4.1.388.14.3.3.1.2.9.1.16 | integer32 | read-only |
The best SNR value seen from the Portal so far. (Remember that +30dBm SNR is better than +20dBm). This value does not make sense when ccPortalSigStatsNumPkts equals to 0. |
wsCcStatsRadioSysTable | 1.3.6.1.4.1.388.14.3.3.1.2.10 | no-access |
This table includes statistics for 802.11 system packets transmitted/received at each Portal. |
|
1.3.6.1.4.1.388.14.3.3.1.2.10.1 | no-access |
|
||
wsCcStatsRadioSysBeaconsTx | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.1 | unsigned32 | read-only |
The number of Beacons sent. |
wsCcStatsRadioSysBeaconsTxOctets | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.2 | unsigned32 | read-only |
The number of octets sent in Beacons. |
wsCcStatsRadioSysProbeReqRx | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.3 | unsigned32 | read-only |
The number of Probe Request packets received. |
wsCcStatsRadioSysProbeReqRxOctets | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.4 | unsigned32 | read-only |
The number of octets received in Probe Request packets. |
wsCcStatsRadioSysProbeRespRetriesNone | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.5 | unsigned32 | read-only |
The number of Probe Response packets sent with no retries. |
wsCcStatsRadioSysProbeRespRetries1 | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.6 | unsigned32 | read-only |
The number of Probe Response packets sent with exactly 1 retry. |
wsCcStatsRadioSysProbeRespRetries2 | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.7 | unsigned32 | read-only |
The number of Probe Response packets sent with exactly 2 retries. |
wsCcStatsRadioSysProbeRespRetries3OrMore | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.8 | unsigned32 | read-only |
The number of Probe Response packets sent with exactly 3 retries or more retries. |
wsCcStatsRadioSysProbeRespRetriesFailed | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.9 | unsigned32 | read-only |
The number of Probe Response packets that were never successfully transmitted because the max retry count was reached. |
wsCcStatsRadioSysProbeRespTxOctets | 1.3.6.1.4.1.388.14.3.3.1.2.10.1.10 | unsigned32 | read-only |
The number of octets successfully transmitted in Probe Response packets. (For example, the octets in a Probe Response that is transmitted twice - one retry - only counts once in this sum). |
wsCcStatsRadioSumShortTable | 1.3.6.1.4.1.388.14.3.3.1.2.11 | no-access |
Averages and rates calculated over the SHORT window for each Portal. |
|
1.3.6.1.4.1.388.14.3.3.1.2.11.1 | no-access |
|
||
wsCcStatsRadioSumShortTimestamp | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.1 | timeticks | read-only |
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
wsCcStatsRadioSumShortNumPkts | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.2 | unsigned32 | read-only |
The number of packets used to calculate the statistics in this window. |
wsCcStatsRadioSumShortPktsPerSec100 | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.3 | scaleby100 | read-only |
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsRadioSumShortPktsPerSecTx100 | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.4 | scaleby100 | read-only |
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsRadioSumShortPktsPerSecRx100 | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.5 | scaleby100 | read-only |
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsRadioSumShortThroughput | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.6 | unsigned32 | read-only |
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsRadioSumShortThroughputTx | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.7 | unsigned32 | read-only |
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsRadioSumShortThroughputRx | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.8 | unsigned32 | read-only |
Actual number of bits RX over the window, divided by the number of seconds in the window. |
wsCcStatsRadioSumShortAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.9 | unsigned32 | read-only |
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received. |
wsCcStatsRadioSumShortAvgMuSignal | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.10 | integer32 | read-only |
The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO |
wsCcStatsRadioSumShortAvgMuNoise | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.11 | integer32 | read-only |
The average of all noise values over the window. |
wsCcStatsRadioSumShortAvgMuSnr | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.12 | integer32 | read-only |
The average of all SNR values over the window. |
wsCcStatsRadioSumShortPp10kNUcastPkts | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.13 | partsper10k | read-only |
Ratio of packets that were NOT unicast. Expressed as parts-per-10000. |
wsCcStatsRadioSumShortPp10kTxWithRetries | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.14 | partsper10k | read-only |
Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
wsCcStatsRadioSumShortPp10kTxMaxRetries | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.15 | partsper10k | read-only |
Ratio of TX packets that were dropped due to excessive. Expressed as parts-per-10000. |
wsCcStatsRadioSumShortTxAvgRetries100 | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.16 | scaleby100 | read-only |
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00). |
wsCcStatsRadiolSumShortPp10kRxUndecrypt | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.17 | partsper10k | read-only |
Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
wsCcStatsRadioSumShortTotalMus | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.18 | unsigned32 | read-only |
The total number of MUs associated to the given Portal. |
wsCcStatsRadioSumShortPp10kRfUtil | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.19 | partsper10k | read-only |
The approximate utilization of the Portal's RF port. Calculated as Throughput divided by AvgBitSpeed. Expressed as parts-per-10000. |
wsCcStatsRadioSumShortPp10kDropped | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.20 | partsper10k | read-only |
Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. Calculated as an average for all WLANs implemented on this Portal. Expressed as parts-per-10000. |
wsCcStatsRadioSumShortCurrVoiceMuCount | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.21 | unsigned32 | read-only |
The current number of devices identified as voice associated. |
wsCcStatsRadioSumShortMaxVoiceMuCount | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.22 | unsigned32 | read-only |
The maximum number of devices identified as voice associated. |
wsCcStatsRadioSumShortAvgVoiceMuCount | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.23 | scaleby100 | read-only |
The average number of devices identified as voice associated. |
wsCcStatsRadioSumShortPp10kVoiceRfUtil | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.24 | partsper10k | read-only |
The approximate utilization of the Portal's RF port for voice traffic. Calculated as Throughput divided by AvgBitSpeed. Expressed as parts-per-10000. |
wsCcStatsRadioSumShortPp10kVoiceDropped | 1.3.6.1.4.1.388.14.3.3.1.2.11.1.25 | partsper10k | read-only |
Packets dropped divided by packets sent for voice. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. Calculated as an average for all WLANs implemented on this Portal. Expressed as parts-per-10000. |
wsCcStatsRadioSumLongTable | 1.3.6.1.4.1.388.14.3.3.1.2.12 | no-access |
Averages and rates calculated over the LONG window for each Portal. (Refer to ccPortalSumStatsShortTable for descriptions). |
|
1.3.6.1.4.1.388.14.3.3.1.2.12.1 | no-access |
|
||
wsCcStatsRadioSumLongTimestamp | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.1 | timeticks | read-only |
|
wsCcStatsRadioSumLongNumPkts | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.2 | unsigned32 | read-only |
|
wsCcStatsRadioSumLongPktsPerSec100 | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.3 | scaleby100 | read-only |
|
wsCcStatsRadioSumLongPktsPerSecTx100 | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.4 | scaleby100 | read-only |
|
wsCcStatsRadioSumLongPktsPerSecRx100 | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.5 | scaleby100 | read-only |
|
wsCcStatsRadioSumLongThroughput | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.6 | unsigned32 | read-only |
|
wsCcStatsRadioSumLongThroughputTx | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.7 | unsigned32 | read-only |
|
wsCcStatsRadioSumLongThroughputRx | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.8 | unsigned32 | read-only |
|
wsCcStatsRadioSumLongAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.9 | unsigned32 | read-only |
|
wsCcStatsRadioSumLongAvgMuSignal | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.10 | integer32 | read-only |
|
wsCcStatsRadioSumLongAvgMuNoise | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.11 | integer32 | read-only |
|
wsCcStatsRadioSumLongAvgMuSnr | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.12 | integer32 | read-only |
|
wsCcStatsRadioSumLongPp10kNUcastPkts | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.13 | partsper10k | read-only |
|
wsCcStatsRadioSumLongPp10kTxWithRetries | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.14 | partsper10k | read-only |
|
wsCcStatsRadioSumLongPp10kTxMaxRetries | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.15 | partsper10k | read-only |
|
wsCcStatsRadioSumLongTxAvgRetries100 | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.16 | scaleby100 | read-only |
|
wsCcStatsRadioSumLongPp10kRxUndecrypt | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.17 | partsper10k | read-only |
|
wsCcStatsRadioSumLongTotalMus | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.18 | unsigned32 | read-only |
|
wsCcStatsRadioSumLongPp10kRfUtil | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.19 | partsper10k | read-only |
|
wsCcStatsRadioSumLongPp10kDropped | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.20 | partsper10k | read-only |
|
wsCcStatsRadioSumLongCurrVoiceMuCount | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.21 | unsigned32 | read-only |
The current number of devices identified as voice associated. |
wsCcStatsRadioSumLongMaxVoiceMuCount | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.22 | unsigned32 | read-only |
The maximum number of devices identified as voice associated. |
wsCcStatsRadioSumLongAvgVoiceMuCount | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.23 | scaleby100 | read-only |
The average number of devices identified as voice associated. |
wsCcStatsRadioSumLongPp10kVoiceRfUtil | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.24 | partsper10k | read-only |
The approximate utilization of the Portal's RF port for voice traffic. Calculated as Throughput divided by AvgBitSpeed. Expressed as parts-per-10000. |
wsCcStatsRadioSumLongPp10kVoiceDropped | 1.3.6.1.4.1.388.14.3.3.1.2.12.1.25 | partsper10k | read-only |
Packets dropped divided by packets sent for voice. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. Calculated as an average for all WLANs implemented on this Portal. Expressed as parts-per-10000. |
wsCcStatsMu | 1.3.6.1.4.1.388.14.3.3.1.3 | |||
wsCcStatsMuTable | 1.3.6.1.4.1.388.14.3.3.1.3.1 | no-access |
This table describes general statistics about packets sent/recieved via each MU serviced by the switch. |
|
1.3.6.1.4.1.388.14.3.3.1.3.1.1 | no-access |
|
||
wsCcStatsMuMac | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.1 | physaddress | read-only |
MAC address of the MU. |
wsCcStatsMuTxPktsUcast | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.2 | counter32 | read-only |
Count of unicast packets sent. |
wsCcStatsMuRxPktsUcast | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.3 | counter32 | read-only |
Count of unicast packets received. |
wsCcStatsMuTxOctetsUcast | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.4 | counter32 | read-only |
Count of unicast octets sent. |
wsCcStatsMuRxOctetsUcast | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.5 | counter32 | read-only |
Count of unicast octets received. |
wsCcStatsMuRxUndecryptablePkts | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.6 | counter32 | read-only |
Count of packets received that could not be decrypted. |
wsCcStatsMuRxRssiNumPkts | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.7 | counter32 | read-only |
Total RSSI packets received. |
wsCcStatsMuRxRssiSum | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.8 | counter32 | read-only |
A running sum of all RSSI values calculated by the switch for packets. |
wsCcStatsMuRxRssiSumSquares | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.9 | counter64 | read-only |
A sum of the squares of each RSSI value calculated for packets received. This value is never negative. |
wsCcStatsMuRxRssiMostRecent | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.10 | integer | read-only |
The best RSSI value seen so far. (Remember that -80dBm Noise is better than -70dBm). This value does not make sense when ccMuRxRssiNumPkts equals to 0. |
wsCcStatsMuLastActivity | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.11 | timeticks | read-only |
A snapshot of the switch's sysUpTime at the time of the last activity (packet sent or received). |
wsCcStatsMuSigNumPackets | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.12 | counter32 | read-only |
Number of packets received during the last sampling period (5 seconds). |
wsCcStatsMuSignalMostRecent | 1.3.6.1.4.1.388.14.3.3.1.3.1.1.13 | integer32 | read-only |
The most recent signal level for this mobile station in dbm; typical values range from -80 dbm (weak) to -20 dbm (strong). Note that if wsCcStatsMuSigNumPackets equals to 0, the value returned would represent a stale value that is older than the sampling period (5 seconds). |
wsCcStatsMuRxPktsTable | 1.3.6.1.4.1.388.14.3.3.1.3.2 | no-access |
For each MU serviced by the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.3.2.1 | no-access |
|
||
wsCcStatsMuRxPktsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.1 | counter32 | read-only |
Number of pkts received at 1 Mb. |
wsCcStatsMuRxPktsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.2 | counter32 | read-only |
Number of pkts received at 2 Mb. |
wsCcStatsMuRxPktsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.3 | counter32 | read-only |
Number of pkts received at 5.5 Mb. |
wsCcStatsMuRxPktsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.4 | counter32 | read-only |
Number of pkts received at 6 Mb. |
wsCcStatsMuRxPktsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.5 | counter32 | read-only |
Number of pkts received at 9 Mb. |
wsCcStatsMuRxPktsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.6 | counter32 | read-only |
Number of pkts received at 11 Mb. |
wsCcStatsMuRxPktsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.7 | counter32 | read-only |
Number of pkts received at 12 Mb. |
wsCcStatsMuRxPktsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.8 | counter32 | read-only |
Number of pkts received at 18 Mb. |
wsCcStatsMuRxPktsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.9 | counter32 | read-only |
Number of pkts received at 22 Mb. |
wsCcStatsMuRxPktsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.10 | counter32 | read-only |
Number of pkts received at 24 Mb. |
wsCcStatsMuRxPktsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.11 | counter32 | read-only |
Number of pkts received at 36 Mb. |
wsCcStatsMuRxPktsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.12 | counter32 | read-only |
Number of pkts received at 48 Mb. |
wsCcStatsMuRxPktsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.3.2.1.13 | counter32 | read-only |
Number of pkts received at 54 Mb. |
wsCcStatsMuTxPktsTable | 1.3.6.1.4.1.388.14.3.3.1.3.3 | no-access |
For each MU serviced by the switch, this table describes counts of packets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.3.3.1 | no-access |
|
||
wsCcStatsMuTxPktsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.1 | counter32 | read-only |
Number of pkts transmitted at 1 Mb. |
wsCcStatsMuTxPktsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.2 | counter32 | read-only |
Number of pkts transmitted at 2 Mb. |
wsCcStatsMuTxPktsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.3 | counter32 | read-only |
Number of pkts transmitted at 5.5 Mb. |
wsCcStatsMuTxPktsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.4 | counter32 | read-only |
Number of pkts transmitted at 6 Mb. |
wsCcStatsMuTxPktsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.5 | counter32 | read-only |
Number of pkts transmitted at 9 Mb. |
wsCcStatsMuTxPktsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.6 | counter32 | read-only |
Number of pkts transmitted at 11 Mb. |
wsCcStatsMuTxPktsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.7 | counter32 | read-only |
Number of pkts transmitted at 12 Mb. |
wsCcStatsMuTxPktsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.8 | counter32 | read-only |
Number of pkts transmitted at 18 Mb. |
wsCcStatsMuTxPktsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.9 | counter32 | read-only |
Number of pkts transmitted at 22 Mb. |
wsCcStatsMuTxPktsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.10 | counter32 | read-only |
Number of pkts transmitted at 24 Mb. |
wsCcStatsMuTxPktsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.11 | counter32 | read-only |
Number of pkts transmitted at 36 Mb. |
wsCcStatsMuTxPktsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.12 | counter32 | read-only |
Number of pkts transmitted at 48 Mb. |
wsCcStatsMuTxPktsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.3.3.1.13 | counter32 | read-only |
Number of pkts transmitted at 54 Mb. |
wsCcStatsMuRxOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.3.4 | no-access |
For each MU serviced by this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.3.4.1 | no-access |
|
||
wsCcStatsMuRxOctetsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.1 | counter32 | read-only |
Number of octets received at 1 Mb. |
wsCcStatsMuRxOctetsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.2 | counter32 | read-only |
Number of octets received at 2 Mb. |
wsCcStatsMuRxOctetsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.3 | counter32 | read-only |
Number of octets received at 5.5 Mb. |
wsCcStatsMuRxOctetsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.4 | counter32 | read-only |
Number of octets received at 6 Mb. |
wsCcStatsMuRxOctetsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.5 | counter32 | read-only |
Number of octets received at 9 Mb. |
wsCcStatsMuRxOctetsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.6 | counter32 | read-only |
Number of octets received at 11 Mb. |
wsCcStatsMuRxOctetsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.7 | counter32 | read-only |
Number of octets received at 12 Mb. |
wsCcStatsMuRxOctetsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.8 | counter32 | read-only |
Number of octets received at 18 Mb. |
wsCcStatsMuRxOctetsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.9 | counter32 | read-only |
Number of octets received at 22 Mb. |
wsCcStatsMuRxOctetsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.10 | counter32 | read-only |
Number of octets received at 24 Mb. |
wsCcStatsMuRxOctetsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.11 | counter32 | read-only |
Number of octets received at 36 Mb. |
wsCcStatsMuRxOctetsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.12 | counter32 | read-only |
Number of octets received at 48 Mb. |
wsCcStatsMuRxOctetsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.3.4.1.13 | counter32 | read-only |
Number of octets received at 54 Mb. |
wsCcStatsMuTxOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.3.5 | no-access |
For each MU serviced by this switch, this table describes counts of octets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.3.5.1 | no-access |
|
||
wsCcStatsMuTxOctetsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.1 | counter32 | read-only |
Number of octets transmitted at 1 Mb. |
wsCcStatsMuTxOctetsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.2 | counter32 | read-only |
Number of octets transmitted at 2 Mb. |
wsCcStatsMuTxOctetsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.3 | counter32 | read-only |
Number of octets transmitted at 5.5 Mb. |
wsCcStatsMuTxOctetsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.4 | counter32 | read-only |
Number of octets transmitted at 6 Mb. |
wsCcStatsMuTxOctetsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.5 | counter32 | read-only |
Number of octets transmitted at 9 Mb. |
wsCcStatsMuTxOctetsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.6 | counter32 | read-only |
Number of octets transmitted at 11 Mb. |
wsCcStatsMuTxOctetsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.7 | counter32 | read-only |
Number of octets transmitted at 12 Mb. |
wsCcStatsMuTxOctetsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.8 | counter32 | read-only |
Number of octets transmitted at 18 Mb. |
wsCcStatsMuTxOctetsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.9 | counter32 | read-only |
Number of octets transmitted at 22 Mb. |
wsCcStatsMuTxOctetsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.10 | counter32 | read-only |
Number of octets transmitted at 24 Mb. |
wsCcStatsMuTxOctetsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.11 | counter32 | read-only |
Number of octets transmitted at 36 Mb. |
wsCcStatsMuTxOctetsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.12 | counter32 | read-only |
Number of octets transmitted at 48 Mb. |
wsCcStatsMuTxOctetsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.3.5.1.13 | counter32 | read-only |
Number of octets transmitted at 54 Mb. |
wsCcStatsMuTxRetriesTable | 1.3.6.1.4.1.388.14.3.3.1.3.6 | no-access |
For each MU serviced by the switch, this table describes counts of the number of packets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
|
1.3.6.1.4.1.388.14.3.3.1.3.6.1 | no-access |
|
||
wsCcStatsMuTxRetriesNone | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.1 | counter32 | read-only |
Number of pkts successfully transmitted with no retries. |
wsCcStatsMuTxRetries01 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.2 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 1 retries. |
wsCcStatsMuTxRetries02 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.3 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 2 retries. |
wsCcStatsMuTxRetries03 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.4 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 3 retries. |
wsCcStatsMuTxRetries04 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.5 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 4 retries. |
wsCcStatsMuTxRetries05 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.6 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 5 retries. |
wsCcStatsMuTxRetries06 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.7 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 6 retries. |
wsCcStatsMuTxRetries07 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.8 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 7 retries. |
wsCcStatsMuTxRetries08 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.9 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 8 retries. |
wsCcStatsMuTxRetries09 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.10 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 9 retries. |
wsCcStatsMuTxRetries10 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.11 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 10 retries. |
wsCcStatsMuTxRetries11 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.12 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 11 retries. |
wsCcStatsMuTxRetries12 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.13 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 12 retries. |
wsCcStatsMuTxRetries13 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.14 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 13 retries. |
wsCcStatsMuTxRetries14 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.15 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 14 retries. |
wsCcStatsMuTxRetries15 | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.16 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 15 retries. |
wsCcStatsMuTxRetriesFailed | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.17 | counter32 | read-only |
Number of pkts that never were successfully transmitted to because the max retry count was exceeded. |
wsCcStatsMuTxRetriesTotal | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.18 | counter32 | read-only |
A total sum of all retries across all packets sent to this MU. For example, if 4 packets have been sent, with the following number of retires: 2, 0, 5, gave-up, this value would be 2+0+5+16 = 23. |
wsCcStatsMuTxRetriesMostRecent | 1.3.6.1.4.1.388.14.3.3.1.3.6.1.19 | integer | read-only |
Most recent retry done by MU. |
wsCcStatsMuTxRetriesOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.3.7 | no-access |
For each MU serviced by the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
|
1.3.6.1.4.1.388.14.3.3.1.3.7.1 | no-access |
|
||
wsCcStatsMuTxRetriesOctetsNone | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.1 | counter32 | read-only |
Number of octets successfully transmitted with no retries. |
wsCcStatsMuTxRetriesOctets01 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.2 | counter32 | read-only |
Number of octets successfully transmitted with exactly 1 retries. |
wsCcStatsMuTxRetriesOctets02 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.3 | counter32 | read-only |
Number of octets successfully transmitted with exactly 2 retries. |
wsCcStatsMuTxRetriesOctets03 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.4 | counter32 | read-only |
Number of octets successfully transmitted with exactly 3 retries. |
wsCcStatsMuTxRetriesOctets04 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.5 | counter32 | read-only |
Number of octets successfully transmitted with exactly 4 retries. |
wsCcStatsMuTxRetriesOctets05 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.6 | counter32 | read-only |
Number of octets successfully transmitted with exactly 5 retries. |
wsCcStatsMuTxRetriesOctets06 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.7 | counter32 | read-only |
Number of octets successfully transmitted with exactly 6 retries. |
wsCcStatsMuTxRetriesOctets07 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.8 | counter32 | read-only |
Number of octets successfully transmitted with exactly 7 retries. |
wsCcStatsMuTxRetriesOctets08 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.9 | counter32 | read-only |
Number of octets successfully transmitted with exactly 8 retries. |
wsCcStatsMuTxRetriesOctets09 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.10 | counter32 | read-only |
Number of octets successfully transmitted with exactly 9 retries. |
wsCcStatsMuTxRetriesOctets10 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.11 | counter32 | read-only |
Number of octets successfully transmitted with exactly 10 retries. |
wsCcStatsMuTxRetriesOctets11 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.12 | counter32 | read-only |
Number of octets successfully transmitted with exactly 11 retries. |
wsCcStatsMuTxRetriesOctets12 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.13 | counter32 | read-only |
Number of octets successfully transmitted with exactly 12 retries. |
wsCcStatsMuTxRetriesOctets13 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.14 | counter32 | read-only |
Number of octets successfully transmitted with exactly 13 retries. |
wsCcStatsMuTxRetriesOctets14 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.15 | counter32 | read-only |
Number of octets successfully transmitted with exactly 14 retries. |
wsCcStatsMuTxRetriesOctets15 | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.16 | counter32 | read-only |
Number of octets successfully transmitted with exactly 15 retries. |
wsCcStatsMuTxRetriesOctetsFailed | 1.3.6.1.4.1.388.14.3.3.1.3.7.1.17 | counter32 | read-only |
Number of octets that never were successfully transmitted to because the max retry count was exceeded. |
wsCcStatsMuSigTable | 1.3.6.1.4.1.388.14.3.3.1.3.8 | no-access |
This table describes statistics about RSSI, Signal, Noise, and SNR for packets recieved via each MU serviced by the switch. |
|
1.3.6.1.4.1.388.14.3.3.1.3.8.1 | no-access |
|
||
wsCcStatsMuSigNumPkts | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.1 | counter32 | read-only |
Total packets received included in all the other counters reported in this row. |
wsCcStatsMuSigSignalBest | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.2 | integer32 | read-only |
The best Signal value seen so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to -500dBm. |
wsCcStatsMuSigSignalWorst | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.3 | integer32 | read-only |
The worst Signal value seen so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to 500dBm. |
wsCcStatsMuSigSignalSum | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.4 | integer32 | read-only |
A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received. Note that this value is normally a negative value ranging from -10dBm to -80dBm. It is possible for this value to be positive, but that would be rare, and would signal an exceptionally strong signal. |
wsCcStatsMuSigSignalSumSquares | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.5 | counter64 | read-only |
A sum of the squares of each Signal value calculated for packets received. Unlike _SignalSum, this value is never negative, since the square of a negative number is a positive. |
wsCcStatsMuSigSignalMostRecent | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.6 | integer32 | read-only |
The best Signal value seen so far. (Remember that a -20dBm Signal is better than -60dBm). This value does not make sense when ccMuSigStatsNumPkts equals to 0. |
wsCcStatsMuSigNoiseBest | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.7 | integer32 | read-only |
The best Noise value seen so far. (Remember that -80dBm Noise is better than -70dBm). This value is initialized to 500dBm. |
wsCcStatsMuSigNoiseWorst | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.8 | integer32 | read-only |
The worst Noise value seen so far. (Remember that -50dBm Noise is worse than -60dBm). This value is initialized to -500dBm. |
wsCcStatsMuSigNoiseSum | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.9 | integer32 | read-only |
A running sum of all Noise values calculated by the switch (using reported RSSI values), for packets. Like _SignalSum, this value is normally a negative value. |
wsCcStatsMuSigStatsNoiseSumSquares | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.10 | counter64 | read-only |
A sum of the squares of each Noise value calculated for packets received. As with _SignalSumSquares, this value is never negative. |
wsCcStatsMuSigNoiseMostRecent | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.11 | integer32 | read-only |
The best Noise value seen so far. (Remember that -80dBm Noise is better than -70dBm). This value does not make sense when ccMuSigStatsNumPkts equals to 0. |
wsCcStatsMuSigSnrBest | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.12 | integer32 | read-only |
The best SNR value seen so far. (Remember that +30dBm SNR is better than +20dBm). This value is initialized to -500dB. |
wsCcStatsMuSigSnrWorst | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.13 | integer32 | read-only |
The worst SNR value seen so far. (Remember that +10dBm SNR is worse than +20dBm). This value is initialized to 500dB. |
wsCcStatsMuSigSnrSum | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.14 | integer32 | read-only |
A running sum of all SNR values calculated by the switch (using reported RSSI values), for packets received. Unlike _Signal and _Noise, this value is never negative. |
wsCcStatsMuSigSnrSumSquares | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.15 | counter64 | read-only |
A sum of the squares of each SNR value calculated for packets received. This value is never negative. |
wsCcStatsMuSigSnrMostRecent | 1.3.6.1.4.1.388.14.3.3.1.3.8.1.16 | integer32 | read-only |
The best SNR value seen so far. (Remember that +30dBm SNR is better than +20dBm). This value does not make sense when ccMuSigStatsNumPkts equals to 0. |
wsCcStatsMuSumShortTable | 1.3.6.1.4.1.388.14.3.3.1.3.9 | no-access |
Averages and rates calculated over the SHORT window for each MU. |
|
1.3.6.1.4.1.388.14.3.3.1.3.9.1 | no-access |
|
||
wsCcStatsMuSumShortTimestamp | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.1 | timeticks | read-only |
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
wsCcStatsMuSumShortNumPkts | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.2 | unsigned32 | read-only |
The number of packets used to calculate the statistics in this window. |
wsCcStatsMuSumShortPktsPerSec100 | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.3 | scaleby100 | read-only |
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMuSumShortPktsPerSecTx100 | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.4 | scaleby100 | read-only |
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMuSumShortPktsPerSecRx100 | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.5 | scaleby100 | read-only |
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMuSumShortThroughput | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.6 | unsigned32 | read-only |
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsMuSumShortThroughputTx | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.7 | unsigned32 | read-only |
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsMuSumShortThroughputRx | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.8 | unsigned32 | read-only |
Actual number of bits RX over the window, divided by the number of seconds in the window. |
wsCcStatsMuSumShortAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.9 | unsigned32 | read-only |
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received. |
wsCcStatsMuSumShortAvgMuSignal | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.10 | integer32 | read-only |
The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO |
wsCcStatsMuSumShortAvgMuNoise | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.11 | integer32 | read-only |
The average of all noise values over the window. |
wsCcStatsMuSumShortAvgMuSnr | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.12 | integer32 | read-only |
The average of all SNR values over the window. |
wsCcStatsMuSumShortPp10kNUcastPkts | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.13 | partsper10k | read-only |
Ratio of packets that were NOT unicast. Expressed as parts-per-10000. |
wsCcStatsMuSumShortPp10kTxWithRetries | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.14 | partsper10k | read-only |
Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
wsCcStatsMuSumShortPp10kDropped | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.15 | partsper10k | read-only |
Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. Calculated as an average for all WLANs implemented on this MU. |
wsCcStatsMuSumShortTxAvgRetries100 | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.16 | scaleby100 | read-only |
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00). |
wsCcStatsMuSumShortPp10kRxUndecrypt | 1.3.6.1.4.1.388.14.3.3.1.3.9.1.17 | partsper10k | read-only |
Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
wsCcStatsMuSumLongTable | 1.3.6.1.4.1.388.14.3.3.1.3.10 | no-access |
Averages and rates calculated over the LONG window for each MU. (Refer to ccMuSumStatsShortTable for descriptions). |
|
1.3.6.1.4.1.388.14.3.3.1.3.10.1 | no-access |
|
||
wsCcStatsMuSumLongTimestamp | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.1 | timeticks | read-only |
|
wsCcStatsMuSumLongNumPkts | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.2 | unsigned32 | read-only |
|
wsCcStatsMuSumLongPktsPerSec100 | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.3 | scaleby100 | read-only |
|
wsCcStatsMuSumLongPktsPerSecTx100 | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.4 | scaleby100 | read-only |
|
wsCcStatsMuSumLongPktsPerSecRx100 | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.5 | scaleby100 | read-only |
|
wsCcStatsMuSumLongThroughput | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.6 | unsigned32 | read-only |
|
wsCcStatsMuSumLongThroughputTx | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.7 | unsigned32 | read-only |
|
wsCcStatsMuSumLongThroughputRx | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.8 | unsigned32 | read-only |
|
wsCcStatsMuSumLongAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.9 | unsigned32 | read-only |
|
wsCcStatsMuSumLongAvgMuSignal | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.10 | integer32 | read-only |
|
wsCcStatsMuSumLongAvgMuNoise | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.11 | integer32 | read-only |
|
wsCcStatsMuSumLongAvgMuSnr | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.12 | integer32 | read-only |
|
wsCcStatsMuSumLongPp10kNUcastPkts | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.13 | partsper10k | read-only |
|
wsCcStatsMuSumLongPp10kTxWithRetries | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.14 | partsper10k | read-only |
|
wsCcStatsMuSumLongPp10kDropped | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.15 | partsper10k | read-only |
|
wsCcStatsMuSumLongTxAvgRetries100 | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.16 | scaleby100 | read-only |
|
wsCcStatsMuSumLongPp10kRxUndecrypt | 1.3.6.1.4.1.388.14.3.3.1.3.10.1.17 | partsper10k | read-only |
|
wsCcStatsWlan | 1.3.6.1.4.1.388.14.3.3.1.4 | |||
wsCcStatsWlanTable | 1.3.6.1.4.1.388.14.3.3.1.4.2 | no-access |
This table describes general statistics about packets sent/recieved via each WLAN on the switch. |
|
1.3.6.1.4.1.388.14.3.3.1.4.2.1 | no-access |
|
||
wsCcStatsWlanIndex | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.1 | integer32 | no-access |
Simple index. |
wsCcStatsWlanTxPktsUcast | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.2 | counter32 | read-only |
Count of unicast packets sent. |
wsCcStatsWlanRxPktsUcast | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.3 | counter32 | read-only |
Count of unicast packets received. |
wsCcStatsWlanRxPktsNUcast | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.4 | counter32 | read-only |
Count of non-unicast (broadcast & multicast) packets received. |
wsCcStatsWlanTxOctetsUcast | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.5 | counter32 | read-only |
Count of unicast octets sent. |
wsCcStatsWlanRxOctetsUcast | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.6 | counter32 | read-only |
Count of unicast octets received. |
wsCcStatsWlanRxOctetsNUcast | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.7 | counter32 | read-only |
Count of non-unicast (broadcast & multicast) octets received. |
wsCcStatsWlanRxUndecryptablePkts | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.8 | counter32 | read-only |
Count of packets received that could not be decrypted. |
wsCcStatsWlanLastActivity | 1.3.6.1.4.1.388.14.3.3.1.4.2.1.9 | timeticks | read-only |
A snapshot of the switch's sysUpTime at the time of the last activity (packet sent or received). |
wsCcStatsWlanRxPktsTable | 1.3.6.1.4.1.388.14.3.3.1.4.3 | no-access |
For each WLAN on the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.4.3.1 | no-access |
|
||
wsCcStatsWlanRxPktsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.1 | counter32 | read-only |
Number of pkts received at 1 Mb. |
wsCcStatsWlanRxPktsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.2 | counter32 | read-only |
Number of pkts received at 2 Mb. |
wsCcStatsWlanRxPktsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.3 | counter32 | read-only |
Number of pkts received at 5.5 Mb. |
wsCcStatsWlanRxPktsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.4 | counter32 | read-only |
Number of pkts received at 6 Mb. |
wsCcStatsWlanRxPktsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.5 | counter32 | read-only |
Number of pkts received at 9 Mb. |
wsCcStatsWlanRxPktsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.6 | counter32 | read-only |
Number of pkts received at 11 Mb. |
wsCcStatsWlanRxPktsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.7 | counter32 | read-only |
Number of pkts received at 12 Mb. |
wsCcStatsWlanRxPktsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.8 | counter32 | read-only |
Number of pkts received at 18 Mb. |
wsCcStatsWlanRxPktsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.9 | counter32 | read-only |
Number of pkts received at 22 Mb. |
wsCcStatsWlanRxPktsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.10 | counter32 | read-only |
Number of pkts received at 24 Mb. |
wsCcStatsWlanRxPktsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.11 | counter32 | read-only |
Number of pkts received at 36 Mb. |
wsCcStatsWlanRxPktsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.12 | counter32 | read-only |
Number of pkts received at 48 Mb. |
wsCcStatsWlanRxPktsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.4.3.1.13 | counter32 | read-only |
Number of pkts received at 54 Mb. |
wsCcStatsWlanTxPktsTable | 1.3.6.1.4.1.388.14.3.3.1.4.4 | no-access |
For each MU serviced by the switch, this table describes counts of packets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.4.4.1 | no-access |
|
||
wsCcStatsWlanTxPktsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.1 | counter32 | read-only |
Number of pkts transmitted at 1 Mb. |
wsCcStatsWlanTxPktsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.2 | counter32 | read-only |
Number of pkts transmitted at 2 Mb. |
wsCcStatsWlanTxPktsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.3 | counter32 | read-only |
Number of pkts transmitted at 5.5 Mb. |
wsCcStatsWlanTxPktsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.4 | counter32 | read-only |
Number of pkts transmitted at 6 Mb. |
wsCcStatsWlanTxPktsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.5 | counter32 | read-only |
Number of pkts transmitted at 9 Mb. |
wsCcStatsWlanTxPktsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.6 | counter32 | read-only |
Number of pkts transmitted at 11 Mb. |
wsCcStatsWlanTxPktsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.7 | counter32 | read-only |
Number of pkts transmitted at 12 Mb. |
wsCcStatsWlanTxPktsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.8 | counter32 | read-only |
Number of pkts transmitted at 18 Mb. |
wsCcStatsWlanTxPktsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.9 | counter32 | read-only |
Number of pkts transmitted at 22 Mb. |
wsCcStatsWlanTxPktsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.10 | counter32 | read-only |
Number of pkts transmitted at 24 Mb. |
wsCcStatsWlanTxPktsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.11 | counter32 | read-only |
Number of pkts transmitted at 36 Mb. |
wsCcStatsWlanTxPktsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.12 | counter32 | read-only |
Number of pkts transmitted at 48 Mb. |
wsCcStatsWlanTxPktsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.4.4.1.13 | counter32 | read-only |
Number of pkts transmitted at 54 Mb. |
wsCcStatsWlanRxOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.4.5 | no-access |
For each MU serviced by this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.4.5.1 | no-access |
|
||
wsCcStatsWlanRxOctetsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.1 | counter32 | read-only |
Number of octets received at 1 Mb. |
wsCcStatsWlanRxOctetsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.2 | counter32 | read-only |
Number of octets received at 2 Mb. |
wsCcStatsWlanRxOctetsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.3 | counter32 | read-only |
Number of octets received at 5.5 Mb. |
wsCcStatsWlanRxOctetsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.4 | counter32 | read-only |
Number of octets received at 6 Mb. |
wsCcStatsWlanRxOctetsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.5 | counter32 | read-only |
Number of octets received at 9 Mb. |
wsCcStatsWlanRxOctetsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.6 | counter32 | read-only |
Number of octets received at 11 Mb. |
wsCcStatsWlanRxOctetsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.7 | counter32 | read-only |
Number of octets received at 12 Mb. |
wsCcStatsWlanRxOctetsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.8 | counter32 | read-only |
Number of octets received at 18 Mb. |
wsCcStatsWlanRxOctetsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.9 | counter32 | read-only |
Number of octets received at 22 Mb. |
wsCcStatsWlanRxOctetsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.10 | counter32 | read-only |
Number of octets received at 24 Mb. |
wsCcStatsWlanRxOctetsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.11 | counter32 | read-only |
Number of octets received at 36 Mb. |
wsCcStatsWlanRxOctetsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.12 | counter32 | read-only |
Number of octets received at 48 Mb. |
wsCcStatsWlanRxOctetsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.4.5.1.13 | counter32 | read-only |
Number of octets received at 54 Mb. |
wsCcStatsWlanTxOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.4.6 | no-access |
For each WLAN on this switch, this table describes counts of octets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
|
1.3.6.1.4.1.388.14.3.3.1.4.6.1 | no-access |
|
||
wsCcStatsWlanTxOctetsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.1 | counter32 | read-only |
Number of octets transmitted at 1 Mb. |
wsCcStatsWlanTxOctetsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.2 | counter32 | read-only |
Number of octets transmitted at 2 Mb. |
wsCcStatsWlanTxOctetsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.3 | counter32 | read-only |
Number of octets transmitted at 5.5 Mb. |
wsCcStatsWlanTxOctetsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.4 | counter32 | read-only |
Number of octets transmitted at 6 Mb. |
wsCcStatsWlanTxOctetsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.5 | counter32 | read-only |
Number of octets transmitted at 9 Mb. |
wsCcStatsWlanTxOctetsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.6 | counter32 | read-only |
Number of octets transmitted at 11 Mb. |
wsCcStatsWlanTxOctetsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.7 | counter32 | read-only |
Number of octets transmitted at 12 Mb. |
wsCcStatsWlanTxOctetsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.8 | counter32 | read-only |
Number of octets transmitted at 18 Mb. |
wsCcStatsWlanTxOctetsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.9 | counter32 | read-only |
Number of octets transmitted at 22 Mb. |
wsCcStatsWlanTxOctetsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.10 | counter32 | read-only |
Number of octets transmitted at 24 Mb. |
wsCcStatsWlanTxOctetsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.11 | counter32 | read-only |
Number of octets transmitted at 36 Mb. |
wsCcStatsWlanTxOctetsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.12 | counter32 | read-only |
Number of octets transmitted at 48 Mb. |
wsCcStatsWlanTxOctetsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.4.6.1.13 | counter32 | read-only |
Number of octets transmitted at 54 Mb. |
wsCcStatsWlanTxRetriesPktsTable | 1.3.6.1.4.1.388.14.3.3.1.4.7 | no-access |
For each WLAN on the switch, this table describes counts of the number of packets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
|
1.3.6.1.4.1.388.14.3.3.1.4.7.1 | no-access |
|
||
wsCcStatsWlanTxRetriesPktsNone | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.1 | counter32 | read-only |
Number of pkts successfully transmitted with no retries. |
wsCcStatsWlanTxRetriesPkts01 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.2 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 1 retries. |
wsCcStatsWlanTxRetriesPkts02 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.3 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 2 retries. |
wsCcStatsWlanTxRetriesPkts03 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.4 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 3 retries. |
wsCcStatsWlanTxRetriesPkts04 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.5 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 4 retries. |
wsCcStatsWlanTxRetriesPkts05 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.6 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 5 retries. |
wsCcStatsWlanTxRetriesPkts06 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.7 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 6 retries. |
wsCcStatsWlanTxRetriesPkts07 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.8 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 7 retries. |
wsCcStatsWlanTxRetriesPkts08 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.9 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 8 retries. |
wsCcStatsWlanTxRetriesPkts09 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.10 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 9 retries. |
wsCcStatsWlanTxRetriesPkts10 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.11 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 10 retries. |
wsCcStatsWlanTxRetriesPkts11 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.12 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 11 retries. |
wsCcStatsWlanTxRetriesPkts12 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.13 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 12 retries. |
wsCcStatsWlanTxRetriesPkts13 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.14 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 13 retries. |
wsCcStatsWlanTxRetriesPkts14 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.15 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 14 retries. |
wsCcStatsWlanTxRetriesPkts15 | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.16 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 15 retries. |
wsCcStatsWlanTxRetriesPktsFailed | 1.3.6.1.4.1.388.14.3.3.1.4.7.1.17 | counter32 | read-only |
Number of pkts that never were successfully transmitted to because the max retry count was exceeded. |
wsCcStatsWlanTxRetriesOctetsTable | 1.3.6.1.4.1.388.14.3.3.1.4.8 | no-access |
For each WLAN on the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
|
1.3.6.1.4.1.388.14.3.3.1.4.8.1 | no-access |
|
||
wsCcStatsWlanTxRetriesOctetsNone | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.1 | counter32 | read-only |
Number of octets successfully transmitted with no retries. |
wsCcStatsWlanTxRetriesOctets01 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.2 | counter32 | read-only |
Number of octets successfully transmitted with exactly 1 retries. |
wsCcStatsWlanTxRetriesOctets02 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.3 | counter32 | read-only |
Number of octets successfully transmitted with exactly 2 retries. |
wsCcStatsWlanTxRetriesOctets03 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.4 | counter32 | read-only |
Number of octets successfully transmitted with exactly 3 retries. |
wsCcStatsWlanTxRetriesOctets04 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.5 | counter32 | read-only |
Number of octets successfully transmitted with exactly 4 retries. |
wsCcStatsWlanTxRetriesOctets05 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.6 | counter32 | read-only |
Number of octets successfully transmitted with exactly 5 retries. |
wsCcStatsWlanTxRetriesOctets06 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.7 | counter32 | read-only |
Number of octets successfully transmitted with exactly 6 retries. |
wsCcStatsWlanTxRetriesOctets07 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.8 | counter32 | read-only |
Number of octets successfully transmitted with exactly 7 retries. |
wsCcStatsWlanTxRetriesOctets08 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.9 | counter32 | read-only |
Number of octets successfully transmitted with exactly 8 retries. |
wsCcStatsWlanTxRetriesOctets09 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.10 | counter32 | read-only |
Number of octets successfully transmitted with exactly 9 retries. |
wsCcStatsWlanTxRetriesOctets10 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.11 | counter32 | read-only |
Number of octets successfully transmitted with exactly 10 retries. |
wsCcStatsWlanTxRetriesOctets11 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.13 | counter32 | read-only |
Number of octets successfully transmitted with exactly 11 retries. |
wsCcStatsWlanTxRetriesOctets12 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.14 | counter32 | read-only |
Number of octets successfully transmitted with exactly 12 retries. |
wsCcStatsWlanTxRetriesOctets13 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.15 | counter32 | read-only |
Number of octets successfully transmitted with exactly 13 retries. |
wsCcStatsWlanTxRetriesOctets14 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.16 | counter32 | read-only |
Number of octets successfully transmitted with exactly 14 retries. |
wsCcStatsWlanTxRetriesOctets15 | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.17 | counter32 | read-only |
Number of octets successfully transmitted with exactly 15 retries. |
wsCcStatsWlanTxRetriesOctetsFailed | 1.3.6.1.4.1.388.14.3.3.1.4.8.1.18 | counter32 | read-only |
Number of octets that never were successfully transmitted to because the max retry count was exceeded. |
wsCcStatsWlanSigTable | 1.3.6.1.4.1.388.14.3.3.1.4.9 | no-access |
This table describes statistics about RSSI, Signal, Noise, and SNR for packets recieved via each WLAN on the switch. |
|
1.3.6.1.4.1.388.14.3.3.1.4.9.1 | no-access |
|
||
wsCcStatsWlanSigStatsNumPkts | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.1 | counter32 | read-only |
Total packets received included in all the other counters reported in this row. |
wsCcStatsWlanSigStatsSignalBest | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.2 | integer32 | read-only |
The best Signal value seen so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to -500dBm. |
wsCcStatsWlanSigStatsSignalWorst | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.3 | integer32 | read-only |
The worst Signal value seen so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to 500dBm. |
wsCcStatsWlanSigStatsSignalSum | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.4 | integer32 | read-only |
A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received. Note that this value is normally a negative value ranging from -10dBm to -80dBm. It is possible for this value to be positive, but that would be rare, and would signal an exceptionally strong signal. |
wsCcStatsWlanSigStatsSignalSumSquares | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.5 | counter64 | read-only |
A sum of the squares of each Signal value calculated for packets received. Unlike _SignalSum, this value is never negative, since the square of a negative number is a positive. |
wsCcStatsWlanSigStatsNoiseBest | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.6 | integer32 | read-only |
The best Noise value seen so far. (Remember that -80dBm Noise is better than -70dBm). This value is initialized to 500dBm. |
wsCcStatsWlanSigStatsNoiseWorst | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.7 | integer32 | read-only |
The worst Noise value seen so far. (Remember that -50dBm Noise is worse than -60dBm). This value is initialized to -500dBm. |
wsCcStatsWlanSigNoiseSum | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.8 | integer32 | read-only |
A running sum of all Noise values calculated by the switch (using reported RSSI values), for packets. Like _SignalSum, this value is normally a negative value. |
wsCcStatsWlanSigNoiseSumSquares | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.9 | counter64 | read-only |
A sum of the squares of each Noise value calculated for packets received. As with _SignalSumSquares, this value is never negative. |
wsCcStatsWlanSigSnrBest | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.10 | integer32 | read-only |
The best SNR value seen so far. (Remember that +30dBm SNR is better than +20dBm). This value is initialized to -500dB. |
wsCcStatsWlanSigSnrWorst | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.11 | integer32 | read-only |
The worst SNR value seen so far. (Remember that +10dBm SNR is worse than +20dBm). This value is initialized to 500dB. |
wsCcStatsWlanSigSnrSum | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.12 | integer32 | read-only |
A running sum of all SNR values calculated by the switch (using reported RSSI values), for packets received. Unlike _Signal and _Noise, this value is never negative. |
wsCcStatsWlanSigSnrSumSquares | 1.3.6.1.4.1.388.14.3.3.1.4.9.1.13 | counter64 | read-only |
A sum of the squares of each SNR value calculated for packets received. This value is never negative. |
wsCcStatsWlanSumShortTable | 1.3.6.1.4.1.388.14.3.3.1.4.10 | no-access |
Averages and rates calculated over the SHORT window for each WLAN. |
|
1.3.6.1.4.1.388.14.3.3.1.4.10.1 | no-access |
|
||
wsCcStatsWlanSumShortTimestamp | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.1 | timeticks | read-only |
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
wsCcStatsWlanSumShortNumPkts | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.2 | unsigned32 | read-only |
The number of packets used to calculate the statistics in this window. |
wsCcStatsWlanSumShortPktsPerSec100 | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.3 | scaleby100 | read-only |
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsWlanSumShortPktsPerSecTx100 | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.4 | scaleby100 | read-only |
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsWlanSumShortPktsPerSecRx100 | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.5 | scaleby100 | read-only |
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsWlanSumShortThroughput | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.6 | unsigned32 | read-only |
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsWlanSumShortThroughputTx | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.7 | unsigned32 | read-only |
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsWlanSumShortThroughputRx | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.8 | unsigned32 | read-only |
Actual number of bits RX over the window, divided by the number of seconds in the window. |
wsCcStatsWlanSumShortAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.9 | unsigned32 | read-only |
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received. |
wsCcStatsWlanSumShortAvgMuSignal | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.10 | integer32 | read-only |
The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO |
wsCcStatsWlanSumShortAvgMuNoise | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.11 | integer32 | read-only |
The average of all noise values over the window. |
wsCcStatsWlanSumShortAvgMuSnr | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.12 | integer32 | read-only |
The average of all SNR values over the window. |
wsCcStatsWlanSumShortPp10kNUcastPkts | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.13 | partsper10k | read-only |
Ratio of packets that were NOT unicast. Expressed as parts-per-10000. |
wsCcStatsWlanSumShortPp10kTxWithRetries | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.14 | partsper10k | read-only |
Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
wsCcStatsWlanSumShortPp10kDropped | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.15 | partsper10k | read-only |
Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. |
wsCcStatsWlanSumShortTxAvgRetries100 | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.16 | scaleby100 | read-only |
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00). |
wsCcStatsWlanSumShortPp10kRxUndecrypt | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.17 | partsper10k | read-only |
Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
wsCcStatsWlanSumShortTotalMus | 1.3.6.1.4.1.388.14.3.3.1.4.10.1.18 | unsigned32 | read-only |
The number of packets used to calculate the statistics in this window for all MUs associated with WLAN. |
wsCcStatsWlanSumLongTable | 1.3.6.1.4.1.388.14.3.3.1.4.11 | no-access |
Averages and rates calculated over the LONG window for each WLAN. (Refer to ccWlanSumStatsShortTable for descriptions). |
|
1.3.6.1.4.1.388.14.3.3.1.4.11.1 | no-access |
|
||
wsCcStatsWlanSumLongTimestamp | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.1 | timeticks | read-only |
|
wsCcStatsWlanSumLongNumPkts | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.2 | unsigned32 | read-only |
|
wsCcStatsWlanSumLongPktsPerSec100 | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.3 | scaleby100 | read-only |
|
wsCcStatsWlanSumLongPktsPerSecTx100 | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.4 | scaleby100 | read-only |
|
wsCcStatsWlanSumLongPktsPerSecRx100 | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.5 | scaleby100 | read-only |
|
wsCcStatsWlanSumLongThroughput | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.6 | unsigned32 | read-only |
|
wsCcStatsWlanSumLongThroughputTx | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.7 | unsigned32 | read-only |
|
wsCcStatsWlanSumLongThroughputRx | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.8 | unsigned32 | read-only |
|
wsCcStatsWlanSumLongAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.9 | unsigned32 | read-only |
|
wsCcStatsWlanSumLongAvgMuSignal | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.10 | integer32 | read-only |
|
wsCcStatsWlanSumLongAvgMuNoise | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.11 | integer32 | read-only |
|
wsCcStatsWlanSumLongAvgMuSnr | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.12 | integer32 | read-only |
|
wsCcStatsWlanSumLongPp10kNUcastPkts | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.13 | partsper10k | read-only |
|
wsCcStatsWlanSumLongPp10kTxWithRetries | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.14 | partsper10k | read-only |
|
wsCcStatsWlanSumLongPp10kDropped | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.15 | partsper10k | read-only |
|
wsCcStatsWlanSumLongTxAvgRetries100 | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.16 | scaleby100 | read-only |
|
wsCcStatsWlanSumLongPp10kRxUndecrypt | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.17 | partsper10k | read-only |
|
wsCcStatsWlanSumLongTotalMus | 1.3.6.1.4.1.388.14.3.3.1.4.11.1.18 | unsigned32 | read-only |
|
wsCcStatsTrapCtrlConf | 1.3.6.1.4.1.388.14.3.3.1.5 | |||
wsCcStatsTrapCtrlConfTable | 1.3.6.1.4.1.388.14.3.3.1.5.1 | no-access |
This table configures thresholds that can be monitored for: - all MUs and/or - all Portals and/or - all WLANs and/or - for the entire switch When a given threshold is crossed, it generates the appropriate corresponding notification, (ccSumStats_: _MU, _Portal, _WLAN, or _Switch). Some thresholds result in notifications when exceeded, and some when the current value sinks below the threshold. This is indicated by the wording of the entry in the entry's _Descr value. In all cases, the summary stat being monitored is the Short value, never the Long value. Note that for thresholds of type thresholdsAvgMuSignal & thresholdsAvgMuNoise, the values being 'watched' are actually negative. In these cases the threshold is specified as a Unsigned32. For example, if you wish to trap on Signal being worse than -75dBm, enter '70'. This works since a user would never want to trap on a threshold of Sinal worse than +10dBm. (SNR is not an issue, since that is a positive value). Any values reported as var-binds in the resultant trap(s) are likewise reported as positive values. Finally, since SNMP does not support decimals, all the threshold values are 100 times their actual values. So, a value of 563 means 5.63. Likewise, when the user wants to set the thresholds, he should set the value to 1000 for an actual value of 10. |
|
1.3.6.1.4.1.388.14.3.3.1.5.1.1 | no-access |
The rows/instances in this table occur at the exact same indices as the corresponding monitored data occurs in the _SumStats tables. For example, row #2 / instance .2 represents the threshold(s) for the _PktsPerSec values for MU, Portal, WLAN, and Switch. If a given threshold does not make sense for one of those 4 entities, its corresponding TruthValue will be false. |
||
wsCcStatsTrapCtrlConfIndex | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.1 | integer | no-access |
Index into table. Note that specific thresholds occur at specific instance values as denoted by the enumeration values assigned to this variable. Enumeration: 'thresholdsPktsPerSec': 3, 'unusedTimestamp': 1, 'thresholdsPpmTxDropped': 15, 'unusedThroughputRx': 8, 'thresholdsPpmRxUndecrypt': 17, 'thresholdsAvgMuSignal': 10, 'thresholdsTxAvgRetries': 16, 'thresholdsThroughput': 6, 'thresholdsAvgMuSnr': 12, 'thresholdsAvgMuNoise': 11, 'thresholdsTotalMus': 18, 'unusedPktsPerSecRx': 5, 'unusedPktsPerSecTx': 4, 'thresholdsPpmTxWithRetires': 14, 'thresholdsPctRfUtil': 19, 'thresholdAvgPortalNoiseSuddenChange': 21, 'thresholdsPctNUcastPkts': 13, 'thresholdsAvgBitSpeed': 9, 'thresholdsPctDropped': 20, 'unusedThroughputTx': 7, 'unusedNumPkts': 2. |
wsCcStatsTrapCtrlConfDescr | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.2 | displaystring | read-only |
Description of the threshold. |
wsCcStatsTrapCtrlConfUnits | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.3 | displaystring | read-only |
Units of the the threshold. |
wsCcStatsTrapCtrlConfCanBeSetMu | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.4 | truthvalue | read-only |
If true, the threshold can be set for MUs. If false, attempting the threshold will return a READ-ONLY. |
wsCcStatsTrapCtrlConfThresholdMus | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.5 | integer32 | read-write |
The threshold for all MUs. If 0, no threshold checking is performed. |
wsCcStatsTrapCtrlConfCanBeSetPortal | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.6 | truthvalue | read-only |
If true, the threshold can be set for Portals. If false, attempting the threshold will return a READ-ONLY. |
wsCcStatsTrapCtrlConfThresholdPortals | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.7 | integer32 | read-write |
The threshold for all Portals. If 0, no threshold checking is performed. |
wsCcStatsTrapCtrlConfCanBeSetWlan | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.8 | truthvalue | read-only |
If true, the threshold can be set for Wlans. If false, attempting the threshold will return a READ-ONLY. |
wsCcStatsTrapCtrlConfThresholdWlans | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.9 | integer32 | read-write |
The threshold for all Wlans. If 0, no threshold checking is performed. |
wsCcStatsTrapCtrlConfCanBeSetSwitch | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.10 | truthvalue | read-only |
If true, the threshold can be set for the entire switch. If false, attempting the threshold will return a READ-ONLY. |
wsCcStatsTrapCtrlConfThresholdSwitch | 1.3.6.1.4.1.388.14.3.3.1.5.1.1.11 | integer32 | read-write |
The threshold for the entire Switch. If 0, no threshold checking is performed. |
wsCcStatsTrapCtrlConfMinPktsForTrap | 1.3.6.1.4.1.388.14.3.3.1.5.2 | unsigned32 | read-write |
The minimum number of packets that must be in a window/dataset before any of the threshold traps will 'fire'. |
wsCcStatsSwitch | 1.3.6.1.4.1.388.14.3.3.1.6 | |||
wsCcStatsSwitchTxRetriesPktsTable | 1.3.6.1.4.1.388.14.3.3.1.6.1 | no-access |
This table describes counts of packets transmitted via various number of retries, (1 retry, 2 retries, 3 retries...)from the switch |
|
1.3.6.1.4.1.388.14.3.3.1.6.1.1 | no-access |
Description. |
||
wsCcStatsSwitchTxRetriesPktsIndex | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.1 | integer32 | read-only |
Index for this table |
wsCcStatsSwitchTxRetriesPkts01 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.2 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 1 retry |
wsCcStatsSwitchTxRetriesPkts02 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.3 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 2 retries |
wsCcStatsSwitchTxRetriesPkts03 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.4 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 3 retries |
wsCcStatsSwitchTxRetriesPkts04 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.5 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 4 retries |
wsCcStatsSwitchTxRetriesPkts05 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.6 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 5 retries |
wsCcStatsSwitchTxRetriesPkts06 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.7 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 6 retries |
wsCcStatsSwitchTxRetriesPkts07 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.8 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 7 retries |
wsCcStatsSwitchTxRetriesPkts08 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.9 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 8 retries |
wsCcStatsSwitchTxRetriesPkts09 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.10 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 9 retries |
wsCcStatsSwitchTxRetriesPkts10 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.11 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 10 retries |
wsCcStatsSwitchTxRetriesPkts11 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.12 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 11 retries |
wsCcStatsSwitchTxRetriesPkts12 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.13 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 12 retries |
wsCcStatsSwitchTxRetriesPkts13 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.14 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 13 retries |
wsCcStatsSwitchTxRetriesPkts14 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.15 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 14 retries |
wsCcStatsSwitchTxRetriesPkts15 | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.16 | counter32 | read-only |
Number of pkts successfully transmitted with exactly 15 retries |
wsCcStatsSwitchTxRetriesPktsFailed | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.17 | counter32 | read-only |
Number of pkts that never were successfully transmitted to because the max retry count was exceeded |
wsCcStatsSwitchTxRetriesPktsNone | 1.3.6.1.4.1.388.14.3.3.1.6.1.1.18 | counter32 | read-only |
Number of pkts successfully transmitted without retries |
wsCcStatsSwitchRxPktsTable | 1.3.6.1.4.1.388.14.3.3.1.6.2 | no-access |
This table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)by the switch |
|
1.3.6.1.4.1.388.14.3.3.1.6.2.1 | no-access |
Description. |
||
wsCcStatsSwitchRxPktsIndex | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.1 | unsigned32 | read-only |
Index for this table |
wsCcStatsSwitchRxPktsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.2 | counter32 | read-only |
Number of pkts received at 1 Mb |
wsCcStatsSwitchRxPktsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.3 | counter32 | read-only |
Number of pkts received at 2 Mb |
wsCcStatsSwitchRxPktsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.4 | counter32 | read-only |
Number of pkts received at 5.5 Mb |
wsCcStatsSwitchRxPktsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.5 | counter32 | read-only |
Number of pkts received at 6 Mb |
wsCcStatsSwitchRxPktsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.6 | counter32 | read-only |
Number of pkts received at 9 Mb |
wsCcStatsSwitchRxPktsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.7 | counter32 | read-only |
Number of pkts received at 11 Mb |
wsCcStatsSwitchRxPktsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.8 | counter32 | read-only |
Number of pkts received at 12 Mb |
wsCcStatsSwitchRxPktsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.9 | counter32 | read-only |
Number of pkts received at 18 Mb |
wsCcStatsSwitchRxPktsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.10 | counter32 | read-only |
Number of pkts received at 22 Mb |
wsCcStatsSwitchRxPktsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.11 | counter32 | read-only |
Number of pkts received at 24 Mb |
wsCcStatsSwitchRxPktsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.12 | counter32 | read-only |
Number of pkts received at 36 Mb |
wsCcStatsSwitchRxPktsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.13 | counter32 | read-only |
Number of pkts received at 48 Mb |
wsCcStatsSwitchRxPktsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.6.2.1.14 | counter32 | read-only |
Number of pkts received at 54 Mb |
wsCcStatsSwitchTxPktsTable | 1.3.6.1.4.1.388.14.3.3.1.6.3 | no-access |
This table describes counts of packets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)from the switch |
|
1.3.6.1.4.1.388.14.3.3.1.6.3.1 | no-access |
Description. |
||
wsCcStatsSwitchTxPktsIndex | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.1 | unsigned32 | read-only |
Index of this table |
wsCcStatsSwitchTxPktsAt1Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.2 | counter32 | read-only |
Number of pkts transmitted at 1 Mb |
wsCcStatsSwitchTxPktsAt2Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.3 | counter32 | read-only |
Number of pkts transmitted at 2 Mb |
wsCcStatsSwitchTxPktsAt5pt5Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.4 | counter32 | read-only |
Number of pkts transmitted at 5.5 Mb |
wsCcStatsSwitchTxPktsAt6Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.5 | counter32 | read-only |
Number of pkts transmitted at 6 Mb |
wsCcStatsSwitchTxPktsAt9Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.6 | counter32 | read-only |
Number of pkts transmitted at 9 Mb |
wsCcStatsSwitchTxPktsAt11Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.7 | counter32 | read-only |
Number of pkts transmitted at 11 Mb |
wsCcStatsSwitchTxPktsAt12Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.8 | counter32 | read-only |
Number of pkts transmitted at 12 Mb |
wsCcStatsSwitchTxPktsAt18Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.9 | counter32 | read-only |
Number of pkts transmitted at 18 Mb |
wsCcStatsSwitchTxPktsAt22Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.10 | counter32 | read-only |
Number of pkts transmitted at 22 Mb |
wsCcStatsSwitchTxPktsAt24Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.11 | counter32 | read-only |
Number of pkts transmitted at 24 Mb |
wsCcStatsSwitchTxPktsAt36Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.12 | counter32 | read-only |
Number of pkts transmitted at 36 Mb |
wsCcStatsSwitchTxPktsAt48Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.13 | counter32 | read-only |
Number of pkts transmitted at 48 Mb |
wsCcStatsSwitchTxPktsAt54Mb | 1.3.6.1.4.1.388.14.3.3.1.6.3.1.14 | counter32 | read-only |
Number of pkts transmitted at 54 Mb |
wsCcStatsRadioExt | 1.3.6.1.4.1.388.14.3.3.1.7 | |||
wsCcStatsRadioExtTable | 1.3.6.1.4.1.388.14.3.3.1.7.1 | no-access |
Description. |
|
1.3.6.1.4.1.388.14.3.3.1.7.1.1 | no-access |
Description. |
||
wsCcStatsRadioExtDownLinkThroughput | 1.3.6.1.4.1.388.14.3.3.1.7.1.1.1 | gauge32 | read-only |
The data throughput of the ethernet down link of this radio. |
wsCcStatsRadioExtUpLinkThroughput | 1.3.6.1.4.1.388.14.3.3.1.7.1.1.2 | gauge32 | read-only |
The data throughput of the ethernet up link of this radio. |
wsCcStatsMesh | 1.3.6.1.4.1.388.14.3.3.1.8 | |||
wsCcStatsMeshTable | 1.3.6.1.4.1.388.14.3.3.1.8.1 | no-access |
This table contains general statistics about packets sent/recieved via each mesh on the switch. |
|
1.3.6.1.4.1.388.14.3.3.1.8.1.1 | no-access |
An entry in the table. |
||
wsCcStatsMeshIndex | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.1 | unsigned32 | no-access |
Index of the radio corresponding to the mesh. |
wsCcStatsMeshConnType | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.2 | integer | read-only |
Mesh Connection Type. Enumeration: 'none': 1, 'baseBridge': 2, 'clientBridge': 3. |
wsCcStatsMeshMac | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.3 | physaddress | read-only |
MAC Address. |
wsCcStatsMeshWlanEssid | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.4 | displaystring | read-only |
ESSID of associated WLAN. |
wsCcStatsMeshRadioType | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.5 | radiotype | read-only |
Radio Type. |
wsCcStatsMeshThroughput | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.6 | unsigned32 | read-only |
Actual number of bits sent and received. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsMeshAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.7 | unsigned32 | read-only |
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received. |
wsCcStatsMeshRetries100 | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.8 | scaleby100 | read-only |
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00). |
wsCcStatsMeshRadioIndex | 1.3.6.1.4.1.388.14.3.3.1.8.1.1.9 | unsigned32 | read-only |
Radio index of the assoicated mesh statistic. |
wsCcStatsMeshSumShortTable | 1.3.6.1.4.1.388.14.3.3.1.8.2 | no-access |
Averages and rates calculated over the SHORT window for each mesh. |
|
1.3.6.1.4.1.388.14.3.3.1.8.2.1 | no-access |
An entry in the table. |
||
wsCcStatsMeshSumShortTimestamp | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.1 | timeticks | read-only |
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
wsCcStatsMeshSumShortNumPkts | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.2 | counter32 | read-only |
The number of packets used to calculate the statistics in this window. |
wsCcStatsMeshSumShortPktsPerSec100 | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.3 | scaleby100 | read-only |
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMeshSumShortPktsPerSecTx100 | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.4 | scaleby100 | read-only |
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMeshSumShortPktsPerSecRx100 | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.5 | scaleby100 | read-only |
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMeshSumShortThroughput | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.6 | unsigned32 | read-only |
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsMeshSumShortThroughputTx | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.7 | unsigned32 | read-only |
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsMeshSumShortThroughputRx | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.8 | unsigned32 | read-only |
Actual number of bits RX over the window, divided by the number of seconds in the window. |
wsCcStatsMeshSumShortAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.9 | unsigned32 | read-only |
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received. |
wsCcStatsMeshSumShortAvgMuSignal | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.10 | integer32 | read-only |
The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. |
wsCcStatsMeshSumShortAvgMuNoise | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.11 | integer32 | read-only |
The average of all noise values over the window. |
wsCcStatsMeshSumShortAvgMuSnr | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.12 | integer32 | read-only |
The average of all SNR values over the window. |
wsCcStatsMeshSumShortPp10kTxWithRetries | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.13 | partsper10k | read-only |
Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
wsCcStatsMeshSumShortPp10kDropped | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.14 | partsper10k | read-only |
Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. |
wsCcStatsMeshSumShortTxAvgRetries100 | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.15 | scaleby100 | read-only |
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00). |
wsCcStatsMeshSumShortPp10kRxUndecrypt | 1.3.6.1.4.1.388.14.3.3.1.8.2.1.16 | partsper10k | read-only |
Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
wsCcStatsMeshSumLongTable | 1.3.6.1.4.1.388.14.3.3.1.8.3 | no-access |
Averages and rates calculated over the LONG window for each mesh. (Please refer to wsCcStatsMeshSumShortTable for descriptions). |
|
1.3.6.1.4.1.388.14.3.3.1.8.3.1 | no-access |
An entry in the table. |
||
wsCcStatsMeshSumLongTimestamp | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.1 | timeticks | read-only |
Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
wsCcStatsMeshSumLongNumPkts | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.2 | counter32 | read-only |
The number of packets used to calculate the statistics in this window. |
wsCcStatsMeshSumLongPktsPerSec100 | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.3 | scaleby100 | read-only |
Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMeshSumLongPktsPerSecTx100 | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.4 | scaleby100 | read-only |
Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMeshSumLongPktsPerSecRx100 | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.5 | scaleby100 | read-only |
Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
wsCcStatsMeshSumLongThroughput | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.6 | unsigned32 | read-only |
Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsMeshSumLongThroughputTx | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.7 | unsigned32 | read-only |
Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). |
wsCcStatsMeshSumLongThroughputRx | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.8 | unsigned32 | read-only |
Actual number of bits RX over the window, divided by the number of seconds in the window. |
wsCcStatsMeshSumLongAvgBitSpeed | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.9 | unsigned32 | read-only |
An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divide the sum by the total number of octets; multiply by 8). For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries). This can be said in more plain english as: the average bit-speed at which packets were sent/received. |
wsCcStatsMeshSumLongAvgMuSignal | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.10 | integer32 | read-only |
The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. |
wsCcStatsMeshSumLongAvgMuNoise | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.11 | integer32 | read-only |
The average of all noise values over the window. |
wsCcStatsMeshSumLongAvgMuSnr | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.12 | integer32 | read-only |
The average of all SNR values over the window. |
wsCcStatsMeshSumLongPp10kTxWithRetries | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.13 | partsper10k | read-only |
Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
wsCcStatsMeshSumLongPp10kDropped | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.14 | partsper10k | read-only |
Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packets are not counted in this ratio. |
wsCcStatsMeshSumLongTxAvgRetries100 | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.15 | scaleby100 | read-only |
For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max times and gave-up), the average number of RE-transmission attempts. Said another (though identical) way: the sum of all tranmission attempts divided by the number of unique packets attempted to be sent. Since SNMP does not convey decimal values, the result above is multiplied by 100. If there were no RE-transmissions, this value would be 0. If every single packet required exactly two tranmissions, this value would be 100, (representing 1.00). |
wsCcStatsMeshSumLongPp10kRxUndecrypt | 1.3.6.1.4.1.388.14.3.3.1.8.3.1.16 | partsper10k | read-only |
Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
wsCcStatsMIBConformance | 1.3.6.1.4.1.388.14.3.3.1.100 | |||
wsCcStatsMIBCompliances | 1.3.6.1.4.1.388.14.3.3.1.100.1 | |||
wsCcStatsMIBCompliance | 1.3.6.1.4.1.388.14.3.3.1.100.1.1 |
CC stats MIB compliance. |
||
wsCcStatsMIBGroups | 1.3.6.1.4.1.388.14.3.3.1.100.2 | |||
wsCcStatsMIBConfGroup | 1.3.6.1.4.1.388.14.3.3.1.100.2.1 |
Cell Controller Statistics MIB Configuration Group. |
||
wsCcStatsMIBRadioGroup | 1.3.6.1.4.1.388.14.3.3.1.100.2.2 |
Cell Controller Statistics MIB Radio Group. |
||
wsCcStatsMIBMuGroup | 1.3.6.1.4.1.388.14.3.3.1.100.2.3 |
Cell Controller Statistics MIB MU Group. |
||
wsCcStatsMIBWlanGroup | 1.3.6.1.4.1.388.14.3.3.1.100.2.4 |
Cell Controller Statistics MIB WLAN Group. |
||
wsCcStatsMIBTrapCtrlConfGroup | 1.3.6.1.4.1.388.14.3.3.1.100.2.5 |
Cell Controller Statistics MIB Trap Control Configuration Group. |
||
wsCcStatsMIBDeprecateGroup | 1.3.6.1.4.1.388.14.3.3.1.100.2.6 |
Description. |
||
wsCcStatsMIBMeshGroup | 1.3.6.1.4.1.388.14.3.3.1.100.2.7 |
Cell Controller Statistics MIB Mesh Group. |