WIENER-CRATE-MIB: View SNMP OID List / Download MIB
VENDOR: W-IE-NE-R POWER ELECTRONICS GMBH
Home | MIB: WIENER-CRATE-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
wiener | 1.3.6.1.4.1.19947 |
Introduction of the communication.can branch. |
||
crate | 1.3.6.1.4.1.19947.1 |
SNMP control for electronic crates. A crate is a complete electronic system and consists of the mechanical rack, a power supply, a fan tray and a backplane. All this things are necessary to provide an adequate housing for electronic modules (e.g. VME CPU's) |
||
system | 1.3.6.1.4.1.19947.1.1 |
A collection of objects which affect the complete crate |
||
sysMainSwitch | 1.3.6.1.4.1.19947.1.1.1 | integer | read-write |
Read: An enumerated value which shows the current state of the crates main switch. Write: Try to switch the complete crate ON or OFF. Only the values ON or OFF are allowed. Enumeration: 'on': 1, 'off': 0. |
sysStatus | 1.3.6.1.4.1.19947.1.1.2 | bits | read-only |
A bit string which shows the status (health) of the complete crate. If a bit is set (1), the explanation is satisfied mainOn (0), system is switched on, individual outputs may be controlled by their specific ON/INHIBIT mainInhibit(1), external (hardware-)inhibit of the complete system localControlOnly (2), local control only (CANBUS write access denied) inputFailure (3), any input failure (e.g. power fail) outputFailure (4), any output failure, details in outputTable fantrayFailure (5), fantray failure sensorFailure (6), temperature of the external sensors too high vmeSysfail(7), VME SYSFAIL signal is active plugAndPlayIncompatible (8) wrong power supply and rack connected busReset (9) The sytem bus (e.g. VME or CPCI) reset signal is active. supplyDerating (10) The (first) system power supply has the DEG signal active. supplyFailure (11) The (first) system power supply has the FAL signal active. supplyDerating2 (12) The second system power supply has the DEG signal active. supplyFailure2 (13) The second system power supply has the FAL signal active. Bits: 'busReset': 9, 'vmeSysfail': 7, 'supplyFailure2': 13, 'sensorFailure': 6, 'localControlOnly': 2, 'mainOn': 0, 'inputFailure': 3, 'mainInhibit': 1, 'supplyDerating2': 12, 'supplyDerating': 10, 'supplyFailure': 11, 'fantrayFailure': 5, 'outputFailure': 4, 'plugAndPlayIncompatible': 8. |
sysVmeSysReset | 1.3.6.1.4.1.19947.1.1.3 | integer | read-write |
Read: Always 0. Write: Trigger the generation of the VME SYSRESET or CPIC RESET signal. This signal will be active for a time of 200 ms Enumeration: 'trigger': 1. |
sysHardwareReset | 1.3.6.1.4.1.19947.1.1.4 | integer32 | read-write |
Triggered a Reset via Watchdog or ResetLine. |
sysFactoryDefaults | 1.3.6.1.4.1.19947.1.1.5 | integer | read-write |
A set operation performs a complete factory reset of ALL data stored in the controller (e.g. community names, passwords, ...). Enumeration: 'on': 1, 'off': 0. |
sysConfigDoMeasurementCurrent | 1.3.6.1.4.1.19947.1.1.10 | bits | read-write |
CSet the analog inputs to measure voltage or current. Bits: 'ch0': 0, 'ch1': 1, 'ch2': 2, 'ch3': 3, 'ch4': 4, 'ch5': 5, 'ch6': 6, 'ch7': 7. |
sysOperatingTime | 1.3.6.1.4.1.19947.1.1.11 | integer32 | read-write |
The time in seconds for how long the controller was in action. |
sysDebugMemory8 | 1.3.6.1.4.1.19947.1.1.1024 | integer32 | read-write |
Debug 16-bit memory access. |
sysDebugMemory16 | 1.3.6.1.4.1.19947.1.1.1025 | integer32 | read-write |
Debug 16-bit memory access. |
sysDebugMemory32 | 1.3.6.1.4.1.19947.1.1.1026 | integer32 | read-write |
Debug 32-bit memory access. |
sysDebug | 1.3.6.1.4.1.19947.1.1.1027 | octet string | read-write |
Debug communication with the MPOD. This is a direct map to the ancient functions which are accessible via USB (without SLIP/SNMP). |
sysDebugDisplay | 1.3.6.1.4.1.19947.1.1.1028 | octet string | read-write |
Debug communication with the MPOD display. |
sysDebugBoot | 1.3.6.1.4.1.19947.1.1.1029 | octet string | read-write |
Debug communication with the simple debug interface / bootloader. |
input | 1.3.6.1.4.1.19947.1.2 |
All objects which are associated with the power input of the crate |
||
output | 1.3.6.1.4.1.19947.1.3 |
All objects which are associated with the power output of the crate |
||
outputNumber | 1.3.6.1.4.1.19947.1.3.1 | integer32 | read-only |
The number of output channels of the crate. |
outputTable | 1.3.6.1.4.1.19947.1.3.2 | no-access |
A list of output entries. |
|
1.3.6.1.4.1.19947.1.3.2.1 | no-access |
A table row |
||
outputIndex | 1.3.6.1.4.1.19947.1.3.2.1.1 | integer | no-access |
A unique number for each power output channel. Its value ranges between 1 and total number of output channels. This value is equivalent to the output channel number at the type label of the crate or power supply, but because the SMI index starts at 1, index 1 corresponds to U0. Enumeration: 'u1810': 1811, 'u1811': 1812, 'u1812': 1813, 'u1813': 1814, 'u1814': 1815, 'u1815': 1816, 'u1816': 1817, 'u1817': 1818, 'u1818': 1819, 'u1819': 1820, 'u1707': 1708, 'u818': 819, 'u819': 820, 'u1148': 1149, 'u1149': 1150, 'u1920': 1921, 'u1921': 1922, 'u1922': 1923, 'u1923': 1924, 'u810': 811, 'u811': 812, 'u812': 813, 'u813': 814, 'u814': 815, 'u815': 816, 'u1144': 1145, 'u1145': 1146, 'u1929': 1930, 'u924': 925, 'u925': 926, 'u926': 927, 'u927': 928, 'u920': 921, 'u921': 922, 'u922': 923, 'u923': 924, 'u928': 929, 'u929': 930, 'u380': 381, 'u381': 382, 'u382': 383, 'u383': 384, 'u384': 385, 'u385': 386, 'u386': 387, 'u387': 388, 'u388': 389, 'u389': 390, 'u1450': 1451, 'u1451': 1452, 'u1452': 1453, 'u1663': 1664, 'u1453': 1454, 'u1662': 1663, 'u1454': 1455, 'u1661': 1662, 'u1455': 1456, 'u1660': 1661, 'u1456': 1457, 'u1667': 1668, 'u1457': 1458, 'u1666': 1667, 'u1665': 1666, 'u1664': 1665, 'u1142': 1143, 'u498': 499, 'u499': 500, 'u1143': 1144, 'u494': 495, 'u495': 496, 'u496': 497, 'u497': 498, 'u490': 491, 'u491': 492, 'u492': 493, 'u493': 494, 'u252': 253, 'u253': 254, 'u250': 251, 'u251': 252, 'u256': 257, 'u257': 258, 'u254': 255, 'u255': 256, 'u1146': 1147, 'u258': 259, 'u259': 260, 'u1147': 1148, 'u816': 817, 'u817': 818, 'u68': 69, 'u69': 70, 'u60': 61, 'u61': 62, 'u62': 63, 'u63': 64, 'u64': 65, 'u65': 66, 'u66': 67, 'u67': 68, 'u663': 664, 'u662': 663, 'u661': 662, 'u660': 661, 'u667': 668, 'u666': 667, 'u665': 666, 'u664': 665, 'u1797': 1798, 'u1796': 1797, 'u669': 670, 'u668': 669, 'u1793': 1794, 'u1792': 1793, 'u1791': 1792, 'u1790': 1791, 'u1559': 1560, 'u1558': 1559, 'u1009': 1010, 'u1008': 1009, 'u1007': 1008, 'u1006': 1007, 'u1005': 1006, 'u1004': 1005, 'u1003': 1004, 'u1002': 1003, 'u1001': 1002, 'u1000': 1001, 'u719': 720, 'u718': 719, 'u717': 718, 'u716': 717, 'u715': 716, 'u714': 715, 'u713': 714, 'u712': 713, 'u711': 712, 'u710': 711, 'u1319': 1320, 'u1318': 1319, 'u1313': 1314, 'u1312': 1313, 'u1311': 1312, 'u1310': 1311, 'u1317': 1318, 'u1316': 1317, 'u1315': 1316, 'u1314': 1315, 'u1177': 1178, 'u1176': 1177, 'u1175': 1176, 'u1174': 1175, 'u1173': 1174, 'u1172': 1173, 'u1171': 1172, 'u1170': 1171, 'u829': 830, 'u1179': 1180, 'u1178': 1179, 'u1775': 1776, 'u1774': 1775, 'u809': 810, 'u808': 809, 'u1771': 1772, 'u1770': 1771, 'u1773': 1774, 'u1772': 1773, 'u803': 804, 'u802': 803, 'u801': 802, 'u800': 801, 'u807': 808, 'u806': 807, 'u805': 806, 'u804': 805, 'u937': 938, 'u936': 937, 'u935': 936, 'u934': 935, 'u933': 934, 'u932': 933, 'u931': 932, 'u930': 931, 'u939': 940, 'u938': 939, 'u1056': 1057, 'u1057': 1058, 'u1429': 1430, 'u1428': 1429, 'u597': 598, 'u1358': 1359, 'u1357': 1358, 'u1356': 1357, 'u1427': 1428, 'u1426': 1427, 'u1058': 1059, 'u1059': 1060, 'u1423': 1424, 'u1422': 1423, 'u393': 394, 'u392': 393, 'u391': 392, 'u390': 391, 'u397': 398, 'u396': 397, 'u395': 396, 'u394': 395, 'u399': 400, 'u398': 399, 'u1401': 1402, 'u489': 490, 'u488': 489, 'u487': 488, 'u486': 487, 'u485': 486, 'u484': 485, 'u483': 484, 'u482': 483, 'u481': 482, 'u480': 481, 'u249': 250, 'u248': 249, 'u245': 246, 'u244': 245, 'u247': 248, 'u246': 247, 'u241': 242, 'u240': 241, 'u243': 244, 'u242': 243, 'u59': 60, 'u58': 59, 'u55': 56, 'u54': 55, 'u57': 58, 'u56': 57, 'u51': 52, 'u50': 51, 'u53': 54, 'u52': 53, 'u1788': 1789, 'u1789': 1790, 'u658': 659, 'u659': 660, 'u656': 657, 'u657': 658, 'u654': 655, 'u655': 656, 'u652': 653, 'u653': 654, 'u650': 651, 'u651': 652, 'u1018': 1019, 'u1019': 1020, 'u1548': 1549, 'u1549': 1550, 'u1010': 1011, 'u1011': 1012, 'u1012': 1013, 'u1013': 1014, 'u1014': 1015, 'u1015': 1016, 'u1016': 1017, 'u1017': 1018, 'u1895': 1896, 'u1304': 1305, 'u1305': 1306, 'u1306': 1307, 'u1307': 1308, 'u1300': 1301, 'u1301': 1302, 'u1302': 1303, 'u1303': 1304, 'u722': 723, 'u723': 724, 'u720': 721, 'u721': 722, 'u1308': 1309, 'u1309': 1310, 'u724': 725, 'u725': 726, 'u1952': 1953, 'u1160': 1161, 'u1161': 1162, 'u834': 835, 'u1163': 1164, 'u1164': 1165, 'u1165': 1166, 'u830': 831, 'u831': 832, 'u1168': 1169, 'u1169': 1170, 'u838': 839, 'u839': 840, 'u1766': 1767, 'u1767': 1768, 'u1764': 1765, 'u1765': 1766, 'u1762': 1763, 'u1763': 1764, 'u1760': 1761, 'u1761': 1762, 'u1948': 1949, 'u1949': 1950, 'u1768': 1769, 'u1437': 1438, 'u1463': 1464, 'u1223': 1224, 'u1222': 1223, 'u1221': 1222, 'u1220': 1221, 'u1227': 1228, 'u1226': 1227, 'u902': 903, 'u903': 904, 'u900': 901, 'u901': 902, 'u906': 907, 'u1225': 1226, 'u904': 905, 'u905': 906, 'u908': 909, 'u909': 910, 'u1432': 1433, 'u1433': 1434, 'u1430': 1431, 'u1735': 1736, 'u1431': 1432, 'u128': 129, 'u129': 130, 'u1975': 1976, 'u124': 125, 'u125': 126, 'u126': 127, 'u127': 128, 'u120': 121, 'u121': 122, 'u122': 123, 'u123': 124, 'u238': 239, 'u239': 240, 'u1473': 1474, 'u230': 231, 'u231': 232, 'u232': 233, 'u233': 234, 'u234': 235, 'u235': 236, 'u236': 237, 'u237': 238, 'u1471': 1472, 'u1476': 1477, 'u1477': 1478, 'u1474': 1475, 'u1475': 1476, 'u1544': 1545, 'u344': 345, 'u345': 346, 'u346': 347, 'u347': 348, 'u340': 341, 'u341': 342, 'u342': 343, 'u343': 344, 'u348': 349, 'u349': 350, 'u1646': 1647, 'u876': 877, 'u1129': 1130, 'u649': 650, 'u648': 649, 'u1578': 1579, 'u641': 642, 'u640': 641, 'u643': 644, 'u642': 643, 'u645': 646, 'u644': 645, 'u647': 648, 'u646': 647, 'u1579': 1580, 'u879': 880, 'u1573': 1574, 'u1572': 1573, 'u1571': 1572, 'u1570': 1571, 'u1577': 1578, 'u1576': 1577, 'u1575': 1576, 'u1574': 1575, 'u42': 43, 'u43': 44, 'u40': 41, 'u41': 42, 'u46': 47, 'u47': 48, 'u44': 45, 'u45': 46, 'u48': 49, 'u49': 50, 'u1737': 1738, 'u1540': 1541, 'u735': 736, 'u734': 735, 'u737': 738, 'u736': 737, 'u731': 732, 'u730': 731, 'u733': 734, 'u732': 733, 'u1689': 1690, 'u1688': 1689, 'u739': 740, 'u738': 739, 'u1371': 1372, 'u1370': 1371, 'u1373': 1374, 'u1372': 1373, 'u1375': 1376, 'u1374': 1375, 'u1377': 1378, 'u1376': 1377, 'u1379': 1380, 'u1378': 1379, 'u821': 822, 'u820': 821, 'u823': 824, 'u822': 823, 'u1199': 1200, 'u824': 825, 'u827': 828, 'u826': 827, 'u1195': 1196, 'u1194': 1195, 'u1197': 1198, 'u1196': 1197, 'u1191': 1192, 'u1190': 1191, 'u1193': 1194, 'u1192': 1193, 'u1753': 1754, 'u1752': 1753, 'u1751': 1752, 'u1750': 1751, 'u1209': 1210, 'u1208': 1209, 'u1755': 1756, 'u1754': 1755, 'u1205': 1206, 'u1204': 1205, 'u1207': 1208, 'u1206': 1207, 'u1201': 1202, 'u1200': 1201, 'u1203': 1204, 'u1202': 1203, 'u1425': 1426, 'u1995': 1996, 'u1994': 1995, 'u1997': 1998, 'u1996': 1997, 'u1991': 1992, 'u1990': 1991, 'u1993': 1994, 'u1992': 1993, 'u1999': 2000, 'u1998': 1999, 'u1424': 1425, 'u919': 920, 'u918': 919, 'u915': 916, 'u914': 915, 'u917': 918, 'u916': 917, 'u911': 912, 'u910': 911, 'u913': 914, 'u912': 913, 'u1681': 1682, 'u1680': 1681, 'u1683': 1684, 'u1682': 1683, 'u1685': 1686, 'u1684': 1685, 'u1687': 1688, 'u1421': 1422, 'u1686': 1687, 'u1420': 1421, 'u1703': 1704, 'u139': 140, 'u138': 139, 'u137': 138, 'u136': 137, 'u135': 136, 'u134': 135, 'u133': 134, 'u132': 133, 'u131': 132, 'u130': 131, 'u1270': 1271, 'u1271': 1272, 'u636': 637, 'u1273': 1274, 'u1274': 1275, 'u1706': 1707, 'u631': 632, 'u632': 633, 'u633': 634, 'u229': 230, 'u228': 229, 'u223': 224, 'u222': 223, 'u221': 222, 'u220': 221, 'u227': 228, 'u226': 227, 'u225': 226, 'u224': 225, 'u357': 358, 'u356': 357, 'u355': 356, 'u354': 355, 'u353': 354, 'u352': 353, 'u351': 352, 'u350': 351, 'u359': 360, 'u358': 359, 'u1557': 1558, 'u1564': 1565, 'u1565': 1566, 'u1566': 1567, 'u1567': 1568, 'u1560': 1561, 'u1561': 1562, 'u1562': 1563, 'u1563': 1564, 'u1568': 1569, 'u1569': 1570, 'u37': 38, 'u36': 37, 'u35': 36, 'u34': 35, 'u33': 34, 'u32': 33, 'u31': 32, 'u30': 31, 'u39': 40, 'u38': 39, 'u740': 741, 'u741': 742, 'u742': 743, 'u743': 744, 'u744': 745, 'u745': 746, 'u746': 747, 'u747': 748, 'u748': 749, 'u749': 750, 'u1698': 1699, 'u1699': 1700, 'u586': 587, 'u587': 588, 'u1360': 1361, 'u585': 586, 'u582': 583, 'u583': 584, 'u580': 581, 'u581': 582, 'u1368': 1369, 'u1369': 1370, 'u588': 589, 'u589': 590, 'u1188': 1189, 'u1189': 1190, 'u1186': 1187, 'u1187': 1188, 'u1184': 1185, 'u1185': 1186, 'u1182': 1183, 'u1183': 1184, 'u1180': 1181, 'u1181': 1182, 'u692': 693, 'u693': 694, 'u690': 691, 'u691': 692, 'u696': 697, 'u697': 698, 'u694': 695, 'u695': 696, 'u1216': 1217, 'u1217': 1218, 'u1214': 1215, 'u699': 700, 'u1212': 1213, 'u1213': 1214, 'u1210': 1211, 'u1211': 1212, 'u1986': 1987, 'u1987': 1988, 'u1984': 1985, 'u1985': 1986, 'u1982': 1983, 'u1983': 1984, 'u1980': 1981, 'u1981': 1982, 'u825': 826, 'u1988': 1989, 'u1198': 1199, 'u968': 969, 'u969': 970, 'u828': 829, 'u960': 961, 'u961': 962, 'u962': 963, 'u963': 964, 'u964': 965, 'u965': 966, 'u966': 967, 'u967': 968, 'u1749': 1750, 'u1757': 1758, 'u1756': 1757, 'u1979': 1980, 'u1978': 1979, 'u1977': 1978, 'u1976': 1977, 'u1610': 1611, 'u1758': 1759, 'u1973': 1974, 'u1972': 1973, 'u1971': 1972, 'u1970': 1971, 'u1715': 1716, 'u108': 109, 'u109': 110, 'u102': 103, 'u103': 104, 'u100': 101, 'u101': 102, 'u106': 107, 'u107': 108, 'u104': 105, 'u105': 106, 'u216': 217, 'u217': 218, 'u214': 215, 'u215': 216, 'u212': 213, 'u213': 214, 'u210': 211, 'u211': 212, 'u218': 219, 'u219': 220, 'u362': 363, 'u363': 364, 'u360': 361, 'u361': 362, 'u366': 367, 'u367': 368, 'u364': 365, 'u365': 366, 'u368': 369, 'u369': 370, 'u1436': 1437, 'u1974': 1975, 'u1511': 1512, 'u1510': 1511, 'u1513': 1514, 'u1512': 1513, 'u1515': 1516, 'u1514': 1515, 'u1517': 1518, 'u1516': 1517, 'u1519': 1520, 'u1518': 1519, 'u24': 25, 'u25': 26, 'u26': 27, 'u27': 28, 'u20': 21, 'u21': 22, 'u22': 23, 'u23': 24, 'u28': 29, 'u29': 30, 'u1893': 1894, 'u1799': 1800, 'u1798': 1799, 'u753': 754, 'u752': 753, 'u751': 752, 'u750': 751, 'u757': 758, 'u756': 757, 'u755': 756, 'u754': 755, 'u759': 760, 'u758': 759, 'u1795': 1796, 'u591': 592, 'u590': 591, 'u593': 594, 'u592': 593, 'u595': 596, 'u594': 595, 'u1359': 1360, 'u596': 597, 'u599': 600, 'u598': 599, 'u1355': 1356, 'u1354': 1355, 'u1353': 1354, 'u1352': 1353, 'u1351': 1352, 'u1350': 1351, 'u857': 858, 'u850': 851, 'u851': 852, 'u852': 853, 'u1101': 1102, 'u1739': 1740, 'u1555': 1556, 'u1229': 1230, 'u1228': 1229, 'u689': 690, 'u688': 689, 'u1554': 1555, 'u685': 686, 'u684': 685, 'u687': 688, 'u686': 687, 'u681': 682, 'u680': 681, 'u683': 684, 'u682': 683, 'u1556': 1557, 'u1551': 1552, 'u1550': 1551, 'u1553': 1554, 'u1552': 1553, 'u1645': 1646, 'u1644': 1645, 'u979': 980, 'u978': 979, 'u1641': 1642, 'u1640': 1641, 'u1643': 1644, 'u1642': 1643, 'u973': 974, 'u972': 973, 'u971': 972, 'u970': 971, 'u977': 978, 'u976': 977, 'u975': 976, 'u974': 975, 'u1960': 1961, 'u1434': 1435, 'u1649': 1650, 'u1961': 1962, 'u1962': 1963, 'u1963': 1964, 'u115': 116, 'u114': 115, 'u117': 118, 'u116': 117, 'u111': 112, 'u110': 111, 'u113': 114, 'u112': 113, 'u119': 120, 'u118': 119, 'u1964': 1965, 'u1965': 1966, 'u1435': 1436, 'u1648': 1649, 'u201': 202, 'u200': 201, 'u203': 204, 'u202': 203, 'u205': 206, 'u204': 205, 'u207': 208, 'u206': 207, 'u209': 210, 'u208': 209, 'u1967': 1968, 'u1700': 1701, 'u1701': 1702, 'u1702': 1703, 'u1140': 1141, 'u1704': 1705, 'u1889': 1890, 'u1705': 1706, 'u379': 380, 'u378': 379, 'u375': 376, 'u374': 375, 'u377': 378, 'u376': 377, 'u371': 372, 'u370': 371, 'u373': 374, 'u372': 373, 'u1141': 1142, 'u1888': 1889, 'u1502': 1503, 'u1503': 1504, 'u1500': 1501, 'u1501': 1502, 'u1506': 1507, 'u1507': 1508, 'u1504': 1505, 'u1505': 1506, 'u1508': 1509, 'u1509': 1510, 'u19': 20, 'u18': 19, 'u11': 12, 'u10': 11, 'u13': 14, 'u12': 13, 'u15': 16, 'u14': 15, 'u17': 18, 'u16': 17, 'u1885': 1886, 'u768': 769, 'u769': 770, 'u766': 767, 'u767': 768, 'u764': 765, 'u765': 766, 'u762': 763, 'u763': 764, 'u760': 761, 'u761': 762, 'u1348': 1349, 'u1349': 1350, 'u568': 569, 'u569': 570, 'u1438': 1439, 'u1439': 1440, 'u564': 565, 'u565': 566, 'u1342': 1343, 'u567': 568, 'u1344': 1345, 'u1345': 1346, 'u562': 563, 'u563': 564, 'u1884': 1885, 'u1234': 1235, 'u1235': 1236, 'u1236': 1237, 'u1237': 1238, 'u1230': 1231, 'u1231': 1232, 'u1232': 1233, 'u1233': 1234, 'u1238': 1239, 'u1239': 1240, 'u1728': 1729, 'u1729': 1730, 'u1722': 1723, 'u1723': 1724, 'u1720': 1721, 'u1721': 1722, 'u1726': 1727, 'u1727': 1728, 'u1724': 1725, 'u1725': 1726, 'u1881': 1882, 'u946': 947, 'u947': 948, 'u944': 945, 'u945': 946, 'u942': 943, 'u943': 944, 'u940': 941, 'u941': 942, 'u1880': 1881, 'u948': 949, 'u949': 950, 'u784': 785, 'u785': 786, 'u786': 787, 'u787': 788, 'u780': 781, 'u781': 782, 'u782': 783, 'u783': 784, 'u788': 789, 'u789': 790, 'u1658': 1659, 'u1659': 1660, 'u160': 161, 'u161': 162, 'u162': 163, 'u163': 164, 'u164': 165, 'u165': 166, 'u166': 167, 'u167': 168, 'u168': 169, 'u169': 170, 'u1951': 1952, 'u1950': 1951, 'u1777': 1778, 'u1776': 1777, 'u1955': 1956, 'u1954': 1955, 'u1957': 1958, 'u1956': 1957, 'u1890': 1891, 'u1891': 1892, 'u1892': 1893, 'u907': 908, 'u1779': 1780, 'u1778': 1779, 'u1896': 1897, 'u1897': 1898, 'u308': 309, 'u309': 310, 'u300': 301, 'u301': 302, 'u302': 303, 'u303': 304, 'u304': 305, 'u305': 306, 'u306': 307, 'u307': 308, 'u1539': 1540, 'u1538': 1539, 'u1537': 1538, 'u1536': 1537, 'u1535': 1536, 'u1534': 1535, 'u1533': 1534, 'u1532': 1533, 'u1531': 1532, 'u1152': 1153, 'u414': 415, 'u415': 416, 'u416': 417, 'u417': 418, 'u410': 411, 'u411': 412, 'u412': 413, 'u413': 414, 'u418': 419, 'u419': 420, 'u779': 780, 'u778': 779, 'u771': 772, 'u770': 771, 'u773': 774, 'u772': 773, 'u775': 776, 'u774': 775, 'u777': 778, 'u776': 777, 'u1409': 1410, 'u1408': 1409, 'u579': 580, 'u578': 579, 'u577': 578, 'u576': 577, 'u575': 576, 'u574': 575, 'u573': 574, 'u572': 573, 'u571': 572, 'u570': 571, 'u1393': 1394, 'u1392': 1393, 'u1391': 1392, 'u1390': 1391, 'u1397': 1398, 'u1396': 1397, 'u1395': 1396, 'u1394': 1395, 'u1399': 1400, 'u1398': 1399, 'u1241': 1242, 'u1240': 1241, 'u1243': 1244, 'u1242': 1243, 'u1245': 1246, 'u1244': 1245, 'u1247': 1248, 'u1246': 1247, 'u1249': 1250, 'u1248': 1249, 'u1719': 1720, 'u1718': 1719, 'u1087': 1088, 'u1086': 1087, 'u1085': 1086, 'u1084': 1085, 'u1083': 1084, 'u1082': 1083, 'u1081': 1082, 'u1080': 1081, 'u1089': 1090, 'u1088': 1089, 'u951': 952, 'u950': 951, 'u953': 954, 'u952': 953, 'u955': 956, 'u954': 955, 'u957': 958, 'u956': 957, 'u959': 960, 'u958': 959, 'u797': 798, 'u796': 797, 'u795': 796, 'u794': 795, 'u793': 794, 'u792': 793, 'u791': 792, 'u790': 791, 'u1887': 1888, 'u1886': 1887, 'u1669': 1670, 'u1668': 1669, 'u1883': 1884, 'u1882': 1883, 'u799': 800, 'u798': 799, 'u1865': 1866, 'u1864': 1865, 'u1867': 1868, 'u1866': 1867, 'u1861': 1862, 'u1860': 1861, 'u1863': 1864, 'u1862': 1863, 'u1869': 1870, 'u1868': 1869, 'u1340': 1341, 'u1341': 1342, 'u566': 567, 'u1343': 1344, 'u560': 561, 'u561': 562, 'u1912': 1913, 'u1346': 1347, 'u1347': 1348, 'u1945': 1946, 'u1738': 1739, 'u173': 174, 'u172': 173, 'u171': 172, 'u170': 171, 'u177': 178, 'u176': 177, 'u175': 176, 'u174': 175, 'u179': 180, 'u178': 179, 'u319': 320, 'u318': 319, 'u313': 314, 'u312': 313, 'u311': 312, 'u310': 311, 'u317': 318, 'u316': 317, 'u315': 316, 'u314': 315, 'u1731': 1732, 'u1730': 1731, 'u1528': 1529, 'u1529': 1530, 'u1953': 1954, 'u1520': 1521, 'u1521': 1522, 'u1522': 1523, 'u1523': 1524, 'u1524': 1525, 'u1525': 1526, 'u1526': 1527, 'u1527': 1528, 'u407': 408, 'u406': 407, 'u405': 406, 'u404': 405, 'u403': 404, 'u402': 403, 'u401': 402, 'u400': 401, 'u1733': 1734, 'u409': 410, 'u408': 409, 'u1732': 1733, 'u1414': 1415, 'u1415': 1416, 'u1416': 1417, 'u1417': 1418, 'u1410': 1411, 'u1411': 1412, 'u1412': 1413, 'u1413': 1414, 'u1418': 1419, 'u1419': 1420, 'u548': 549, 'u549': 550, 'u542': 543, 'u543': 544, 'u540': 541, 'u541': 542, 'u546': 547, 'u547': 548, 'u544': 545, 'u545': 546, 'u1388': 1389, 'u1389': 1390, 'u1734': 1735, 'u1384': 1385, 'u1385': 1386, 'u1386': 1387, 'u1387': 1388, 'u1380': 1381, 'u1381': 1382, 'u1382': 1383, 'u1383': 1384, 'u890': 891, 'u891': 892, 'u892': 893, 'u893': 894, 'u894': 895, 'u895': 896, 'u896': 897, 'u897': 898, 'u898': 899, 'u899': 900, 'u1252': 1253, 'u1253': 1254, 'u1250': 1251, 'u1251': 1252, 'u1256': 1257, 'u1257': 1258, 'u1254': 1255, 'u1255': 1256, 'u1708': 1709, 'u1709': 1710, 'u1258': 1259, 'u1259': 1260, 'u1090': 1091, 'u1091': 1092, 'u1092': 1093, 'u1093': 1094, 'u1094': 1095, 'u1095': 1096, 'u1096': 1097, 'u1097': 1098, 'u1098': 1099, 'u1099': 1100, 'u1486': 1487, 'u1736': 1737, 'u1489': 1490, 'u1488': 1489, 'u1898': 1899, 'u1899': 1900, 'u1678': 1679, 'u1679': 1680, 'u1674': 1675, 'u1675': 1676, 'u1676': 1677, 'u1677': 1678, 'u1670': 1671, 'u1671': 1672, 'u1672': 1673, 'u1673': 1674, 'u1876': 1877, 'u1877': 1878, 'u1874': 1875, 'u1875': 1876, 'u1872': 1873, 'u1873': 1874, 'u1870': 1871, 'u1871': 1872, 'u1878': 1879, 'u1879': 1880, 'u1780': 1781, 'u148': 149, 'u149': 150, 'u146': 147, 'u147': 148, 'u144': 145, 'u145': 146, 'u142': 143, 'u143': 144, 'u140': 141, 'u141': 142, 'u1781': 1782, 'u1959': 1960, 'u1782': 1783, 'u1958': 1959, 'u1449': 1450, 'u1448': 1449, 'u326': 327, 'u327': 328, 'u324': 325, 'u325': 326, 'u322': 323, 'u323': 324, 'u320': 321, 'u321': 322, 'u1445': 1446, 'u328': 329, 'u329': 330, 'u1656': 1657, 'u1444': 1445, 'u1657': 1658, 'u1654': 1655, 'u1655': 1656, 'u1652': 1653, 'u1653': 1654, 'u1650': 1651, 'u1651': 1652, 'u865': 866, 'u864': 865, 'u867': 868, 'u432': 433, 'u433': 434, 'u430': 431, 'u431': 432, 'u436': 437, 'u437': 438, 'u434': 435, 'u435': 436, 'u1155': 1156, 'u438': 439, 'u439': 440, 'u1154': 1155, 'u863': 864, 'u862': 863, 'u555': 556, 'u554': 555, 'u557': 558, 'u556': 557, 'u551': 552, 'u550': 551, 'u553': 554, 'u552': 553, 'u1469': 1470, 'u1468': 1469, 'u1746': 1747, 'u559': 560, 'u558': 559, 'u1747': 1748, 'u883': 884, 'u882': 883, 'u881': 882, 'u880': 881, 'u887': 888, 'u886': 887, 'u885': 886, 'u884': 885, 'u889': 890, 'u888': 889, 'u854': 855, 'u1269': 1270, 'u1268': 1269, 'u1267': 1268, 'u1266': 1267, 'u1265': 1266, 'u1264': 1265, 'u1263': 1264, 'u1262': 1263, 'u1261': 1262, 'u1260': 1261, 'u1069': 1070, 'u1068': 1069, 'u1065': 1066, 'u1064': 1065, 'u1067': 1068, 'u1066': 1067, 'u1061': 1062, 'u1060': 1061, 'u1063': 1064, 'u1062': 1063, 'u1285': 1286, 'u1284': 1285, 'u1287': 1288, 'u1286': 1287, 'u1281': 1282, 'u1280': 1281, 'u1283': 1284, 'u1282': 1283, 'u1289': 1290, 'u1288': 1289, 'u856': 857, 'u1924': 1925, 'u1609': 1610, 'u1608': 1609, 'u1894': 1895, 'u1601': 1602, 'u1600': 1601, 'u1603': 1604, 'u1602': 1603, 'u1605': 1606, 'u1604': 1605, 'u1607': 1608, 'u1606': 1607, 'u1925': 1926, 'u1843': 1844, 'u1842': 1843, 'u1841': 1842, 'u1840': 1841, 'u1847': 1848, 'u1846': 1847, 'u1845': 1846, 'u1844': 1845, 'u1849': 1850, 'u1848': 1849, 'u1692': 1693, 'u1926': 1927, 'u1693': 1694, 'u1690': 1691, 'u1115': 1116, 'u1114': 1115, 'u1117': 1118, 'u1116': 1117, 'u1111': 1112, 'u1110': 1111, 'u1113': 1114, 'u1112': 1113, 'u1696': 1697, 'u1119': 1120, 'u1118': 1119, 'u1697': 1698, 'u1927': 1928, 'u1694': 1695, 'u1695': 1696, 'u159': 160, 'u1362': 1363, 'u1363': 1364, 'u151': 152, 'u150': 151, 'u153': 154, 'u152': 153, 'u155': 156, 'u584': 585, 'u157': 158, 'u156': 157, 'u1361': 1362, 'u1366': 1367, 'u1367': 1368, 'u1364': 1365, 'u1365': 1366, 'u1107': 1108, 'u1490': 1491, 'u1598': 1599, 'u1491': 1492, 'u1794': 1795, 'u331': 332, 'u330': 331, 'u333': 334, 'u332': 333, 'u335': 336, 'u334': 335, 'u337': 338, 'u336': 337, 'u339': 340, 'u338': 339, 'u1593': 1594, 'u1592': 1593, 'u1493': 1494, 'u1595': 1596, 'u1594': 1595, 'u1597': 1598, 'u1596': 1597, 'u1691': 1692, 'u1928': 1929, 'u429': 430, 'u428': 429, 'u425': 426, 'u424': 425, 'u427': 428, 'u426': 427, 'u421': 422, 'u420': 421, 'u423': 424, 'u422': 423, 'u1914': 1915, 'u520': 521, 'u521': 522, 'u522': 523, 'u523': 524, 'u524': 525, 'u525': 526, 'u526': 527, 'u527': 528, 'u528': 529, 'u529': 530, 'u1478': 1479, 'u1479': 1480, 'u1759': 1760, 'u1278': 1279, 'u1279': 1280, 'u638': 639, 'u639': 640, 'u634': 635, 'u635': 636, 'u1272': 1273, 'u637': 638, 'u630': 631, 'u1275': 1276, 'u1276': 1277, 'u1277': 1278, 'u1078': 1079, 'u1079': 1080, 'u1076': 1077, 'u1077': 1078, 'u1074': 1075, 'u1075': 1076, 'u1072': 1073, 'u1073': 1074, 'u1070': 1071, 'u1071': 1072, 'u1296': 1297, 'u1297': 1298, 'u1294': 1295, 'u1295': 1296, 'u1292': 1293, 'u1293': 1294, 'u1290': 1291, 'u1291': 1292, 'u1298': 1299, 'u1299': 1300, 'u988': 989, 'u989': 990, 'u982': 983, 'u983': 984, 'u980': 981, 'u981': 982, 'u986': 987, 'u987': 988, 'u984': 985, 'u985': 986, 'u1618': 1619, 'u1619': 1620, 'u1612': 1613, 'u1613': 1614, 'u1126': 1127, 'u1611': 1612, 'u1616': 1617, 'u1617': 1618, 'u1614': 1615, 'u1615': 1616, 'u1487': 1488, 'u1858': 1859, 'u1859': 1860, 'u1854': 1855, 'u1855': 1856, 'u1856': 1857, 'u1857': 1858, 'u1850': 1851, 'u1851': 1852, 'u1852': 1853, 'u1853': 1854, 'u1968': 1969, 'u9': 10, 'u8': 9, 'u1969': 1970, 'u5': 6, 'u4': 5, 'u7': 8, 'u6': 7, 'u1': 2, 'u0': 1, 'u3': 4, 'u2': 3, 'u1106': 1107, 'u855': 856, 'u1104': 1105, 'u1105': 1106, 'u1102': 1103, 'u1103': 1104, 'u1100': 1101, 'u853': 854, 'u1748': 1749, 'u858': 859, 'u859': 860, 'u1108': 1109, 'u1109': 1110, 'u1218': 1219, 'u1219': 1220, 'u1744': 1745, 'u1745': 1746, 'u698': 699, 'u1215': 1216, 'u1740': 1741, 'u1741': 1742, 'u1742': 1743, 'u1743': 1744, 'u1472': 1473, 'u182': 183, 'u183': 184, 'u180': 181, 'u181': 182, 'u186': 187, 'u187': 188, 'u184': 185, 'u185': 186, 'u188': 189, 'u189': 190, 'u1989': 1990, 'u1470': 1471, 'u458': 459, 'u459': 460, 'u1460': 1461, 'u450': 451, 'u451': 452, 'u452': 453, 'u453': 454, 'u454': 455, 'u455': 456, 'u456': 457, 'u457': 458, 'u1462': 1463, 'u1465': 1466, 'u1464': 1465, 'u1467': 1468, 'u1591': 1592, 'u1466': 1467, 'u533': 534, 'u532': 533, 'u531': 532, 'u530': 531, 'u537': 538, 'u536': 537, 'u535': 536, 'u534': 535, 'u1447': 1448, 'u1446': 1447, 'u539': 540, 'u538': 539, 'u1443': 1444, 'u1442': 1443, 'u1441': 1442, 'u1440': 1441, 'u1133': 1134, 'u1783': 1784, 'u1132': 1133, 'u1784': 1785, 'u845': 846, 'u1785': 1786, 'u1130': 1131, 'u1786': 1787, 'u843': 844, 'u1787': 1788, 'u1136': 1137, 'u1135': 1136, 'u1134': 1135, 'u629': 630, 'u628': 629, 'u627': 628, 'u626': 627, 'u625': 626, 'u624': 625, 'u623': 624, 'u622': 623, 'u621': 622, 'u620': 621, 'u1599': 1600, 'u1546': 1547, 'u1049': 1050, 'u1048': 1049, 'u1547': 1548, 'u1043': 1044, 'u1042': 1043, 'u1041': 1042, 'u1040': 1041, 'u1047': 1048, 'u1046': 1047, 'u1045': 1046, 'u1044': 1045, 'u1545': 1546, 'u1919': 1920, 'u1918': 1919, 'u1915': 1916, 'u1542': 1543, 'u1917': 1918, 'u1916': 1917, 'u1911': 1912, 'u1910': 1911, 'u1913': 1914, 'u1543': 1544, 'u995': 996, 'u994': 995, 'u997': 998, 'u996': 997, 'u991': 992, 'u990': 991, 'u993': 994, 'u992': 993, 'u1541': 1542, 'u999': 1000, 'u998': 999, 'u1590': 1591, 'u1627': 1628, 'u1626': 1627, 'u1625': 1626, 'u1624': 1625, 'u1623': 1624, 'u1622': 1623, 'u1621': 1622, 'u1620': 1621, 'u1629': 1630, 'u1628': 1629, 'u1647': 1648, 'u1829': 1830, 'u1828': 1829, 'u1821': 1822, 'u1820': 1821, 'u1823': 1824, 'u1822': 1823, 'u1825': 1826, 'u1824': 1825, 'u1827': 1828, 'u1826': 1827, 'u847': 848, 'u846': 847, 'u1131': 1132, 'u844': 845, 'u1137': 1138, 'u842': 843, 'u841': 842, 'u840': 841, 'u1139': 1140, 'u1138': 1139, 'u849': 850, 'u848': 849, 'u728': 729, 'u729': 730, 'u199': 200, 'u198': 199, 'u195': 196, 'u194': 195, 'u197': 198, 'u196': 197, 'u191': 192, 'u190': 191, 'u193': 194, 'u192': 193, 'u1461': 1462, 'u726': 727, 'u727': 728, 'u449': 450, 'u448': 449, 'u443': 444, 'u442': 443, 'u441': 442, 'u440': 441, 'u447': 448, 'u446': 447, 'u445': 446, 'u444': 445, 'u91': 92, 'u90': 91, 'u93': 94, 'u92': 93, 'u95': 96, 'u94': 95, 'u97': 98, 'u96': 97, 'u99': 100, 'u98': 99, 'u1458': 1459, 'u1459': 1460, 'u508': 509, 'u509': 510, 'u506': 507, 'u507': 508, 'u504': 505, 'u505': 506, 'u502': 503, 'u503': 504, 'u500': 501, 'u501': 502, 'u1054': 1055, 'u1055': 1056, 'u618': 619, 'u619': 620, 'u1050': 1051, 'u1051': 1052, 'u1052': 1053, 'u1053': 1054, 'u612': 613, 'u613': 614, 'u610': 611, 'u611': 612, 'u616': 617, 'u617': 618, 'u614': 615, 'u615': 616, 'u1588': 1589, 'u1589': 1590, 'u1582': 1583, 'u1583': 1584, 'u1580': 1581, 'u1581': 1582, 'u1586': 1587, 'u1587': 1588, 'u1584': 1585, 'u1585': 1586, 'u1908': 1909, 'u1909': 1910, 'u1906': 1907, 'u1907': 1908, 'u1904': 1905, 'u1905': 1906, 'u1902': 1903, 'u1903': 1904, 'u1900': 1901, 'u1901': 1902, 'u1630': 1631, 'u1631': 1632, 'u1632': 1633, 'u1633': 1634, 'u1634': 1635, 'u1635': 1636, 'u1636': 1637, 'u1637': 1638, 'u1638': 1639, 'u1639': 1640, 'u1838': 1839, 'u1839': 1840, 'u1832': 1833, 'u1833': 1834, 'u1830': 1831, 'u1831': 1832, 'u1836': 1837, 'u1837': 1838, 'u1834': 1835, 'u1835': 1836, 'u872': 873, 'u873': 874, 'u870': 871, 'u871': 872, 'u1128': 1129, 'u877': 878, 'u874': 875, 'u875': 876, 'u1124': 1125, 'u1125': 1126, 'u878': 879, 'u1127': 1128, 'u1120': 1121, 'u1121': 1122, 'u1122': 1123, 'u1123': 1124, 'u836': 837, 'u837': 838, 'u1162': 1163, 'u835': 836, 'u832': 833, 'u833': 834, 'u1166': 1167, 'u1167': 1168, 'u1942': 1943, 'u1943': 1944, 'u1940': 1941, 'u1941': 1942, 'u1946': 1947, 'u1530': 1531, 'u1947': 1948, 'u1944': 1945, 'u298': 299, 'u299': 300, 'u296': 297, 'u297': 298, 'u294': 295, 'u295': 296, 'u292': 293, 'u293': 294, 'u290': 291, 'u291': 292, 'u1769': 1770, 'u476': 477, 'u477': 478, 'u474': 475, 'u475': 476, 'u472': 473, 'u473': 474, 'u470': 471, 'u471': 472, 'u478': 479, 'u479': 480, 'u274': 275, 'u275': 276, 'u276': 277, 'u277': 278, 'u270': 271, 'u271': 272, 'u272': 273, 'u273': 274, 'u278': 279, 'u279': 280, 'u86': 87, 'u87': 88, 'u84': 85, 'u85': 86, 'u82': 83, 'u83': 84, 'u80': 81, 'u81': 82, 'u88': 89, 'u89': 90, 'u519': 520, 'u518': 519, 'u511': 512, 'u510': 511, 'u513': 514, 'u512': 513, 'u515': 516, 'u514': 515, 'u517': 518, 'u516': 517, 'u605': 606, 'u604': 605, 'u607': 608, 'u606': 607, 'u601': 602, 'u600': 601, 'u603': 604, 'u602': 603, 'u609': 610, 'u608': 609, 'u1021': 1022, 'u1020': 1021, 'u1023': 1024, 'u1022': 1023, 'u1025': 1026, 'u1024': 1025, 'u1027': 1028, 'u1026': 1027, 'u1029': 1030, 'u1028': 1029, 'u1939': 1940, 'u1938': 1939, 'u1933': 1934, 'u1932': 1933, 'u1931': 1932, 'u1930': 1931, 'u1937': 1938, 'u1936': 1937, 'u1935': 1936, 'u1934': 1935, 'u1403': 1404, 'u1483': 1484, 'u1482': 1483, 'u1481': 1482, 'u1480': 1481, 'u1339': 1340, 'u1338': 1339, 'u1485': 1486, 'u1484': 1485, 'u1335': 1336, 'u1334': 1335, 'u1337': 1338, 'u1336': 1337, 'u1331': 1332, 'u1330': 1331, 'u1333': 1334, 'u1332': 1333, 'u1807': 1808, 'u1806': 1807, 'u1805': 1806, 'u1804': 1805, 'u1803': 1804, 'u1802': 1803, 'u1801': 1802, 'u1800': 1801, 'u1809': 1810, 'u1808': 1809, 'u1159': 1160, 'u1158': 1159, 'u869': 870, 'u868': 869, 'u1402': 1403, 'u1151': 1152, 'u1150': 1151, 'u1153': 1154, 'u866': 867, 'u861': 862, 'u860': 861, 'u1157': 1158, 'u1156': 1157, 'u1400': 1401, 'u1407': 1408, 'u1406': 1407, 'u1405': 1406, 'u1404': 1405, 'u1224': 1225, 'u289': 290, 'u288': 289, 'u281': 282, 'u280': 281, 'u283': 284, 'u282': 283, 'u285': 286, 'u284': 285, 'u287': 288, 'u286': 287, 'u461': 462, 'u460': 461, 'u463': 464, 'u462': 463, 'u465': 466, 'u464': 465, 'u467': 468, 'u466': 467, 'u469': 470, 'u468': 469, 'u267': 268, 'u266': 267, 'u265': 266, 'u264': 265, 'u263': 264, 'u262': 263, 'u261': 262, 'u260': 261, 'u269': 270, 'u268': 269, 'u1717': 1718, 'u79': 80, 'u78': 79, 'u1716': 1717, 'u73': 74, 'u72': 73, 'u71': 72, 'u70': 71, 'u77': 78, 'u76': 77, 'u75': 76, 'u74': 75, 'u1714': 1715, 'u1713': 1714, 'u1712': 1713, 'u1711': 1712, 'u1710': 1711, 'u158': 159, 'u670': 671, 'u671': 672, 'u672': 673, 'u673': 674, 'u674': 675, 'u675': 676, 'u676': 677, 'u677': 678, 'u678': 679, 'u679': 680, 'u1966': 1967, 'u1032': 1033, 'u1033': 1034, 'u1030': 1031, 'u1031': 1032, 'u1036': 1037, 'u1037': 1038, 'u1034': 1035, 'u1035': 1036, 'u1038': 1039, 'u1039': 1040, 'u1499': 1500, 'u154': 155, 'u1494': 1495, 'u1495': 1496, 'u1496': 1497, 'u1497': 1498, 'u708': 709, 'u709': 710, 'u704': 705, 'u705': 706, 'u706': 707, 'u707': 708, 'u700': 701, 'u701': 702, 'u702': 703, 'u703': 704, 'u1498': 1499, 'u1492': 1493, 'u1328': 1329, 'u1329': 1330, 'u1326': 1327, 'u1327': 1328, 'u1324': 1325, 'u1325': 1326, 'u1322': 1323, 'u1323': 1324, 'u1320': 1321, 'u1321': 1322. |
outputName | 1.3.6.1.4.1.19947.1.3.2.1.2 | displaystring | read-only |
A textual string containing a short name of the output. If the crate is equipped with an alphanumeric display, this string is shown to identify a output channel. |
outputGroup | 1.3.6.1.4.1.19947.1.3.2.1.3 | integer32 | read-write |
The group number (1...63) assigned to each channel. If commands shall be sent to all channels with a specific group number (e.g. with the groupsSwitch command defined below), additional bits can be added to the group number: HLgggggg g: Group number (1...63) L: Mask bit: 1: high voltage channels only, no low voltage channels H: Mask bit: 1: low voltage channels only, no high voltage channels Special groups: 0: all (LV+HV) channels 0x40: all, but no LV channels 0x80: all, but no HV channels |
outputStatus | 1.3.6.1.4.1.19947.1.3.2.1.4 | bits | read-only |
A bit string which shows the status (health and operating conditions) of one output channel. If a bit is set (1), the explanation is satisfied: outputOn (0), output channel is on outputInhibit(1), external (hardware-)inhibit of the output channel outputFailureMinSenseVoltage (2) Supervision limit hurt: Sense voltage is too low outputFailureMaxSenseVoltage (3), Supervision limit hurt: Sense voltage is too high outputFailureMaxTerminalVoltage (4), Supervision limit hurt: Terminal voltage is too high outputFailureMaxCurrent (5), Supervision limit hurt: Current is too high outputFailureMaxTemperature (6), Supervision limit hurt: Heat sink temperature is too high outputFailureMaxPower (7), Supervision limit hurt: Output power is too high outputFailureTimeout (9), Communication timeout between output channel and main control outputCurrentLimited (10), Current limiting is active (constant current mode) outputRampUp (11), Output voltage is increasing (e.g. after switch on) outputRampDown (12), Output voltage is decreasing (e.g. after switch off) outputEnableKill (13), EnableKill is active outputEmergencyOff (14), EmergencyOff event is active outputAdjusting (15), Fine adjustment is working outputConstantVoltage (16), Voltage control (constant voltage mode) outputLowCurrentRange (17), The channel is operating in the low current measurement range outputCurrentBoundsExceeded (18), Output current is out of bounds outputFailureCurrentLimit (19) Hardware current limit (EHS) / trip (EDS, EBS) was exceeded Bits: 'outputRampUp': 11, 'outputFailureMaxTemperature': 6, 'outputRampDown': 12, 'outputFailureMaxCurrent': 5, 'outputConstantVoltage': 16, 'outputCurrentLimited': 10, 'outputFailureMaxPower': 7, 'outputOn': 0, 'outputInhibit': 1, 'outputFailureMaxTerminalVoltage': 4, 'outputFailureCurrentLimit': 19, 'outputAdjusting': 15, 'outputCurrentBoundsExceeded': 18, 'outputFailureTimeout': 9, 'outputFailureMinSenseVoltage': 2, 'outputLowCurrentRange': 17, 'outputEmergencyOff': 14, 'outputEnableKill': 13, 'outputFailureMaxSenseVoltage': 3. |
outputMeasurementSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.5 | float | read-only |
The measured voltage at the sense input lines. |
outputMeasurementTerminalVoltage | 1.3.6.1.4.1.19947.1.3.2.1.6 | float | read-only |
The measured voltage at the output terminals. |
outputMeasurementCurrent | 1.3.6.1.4.1.19947.1.3.2.1.7 | float | read-only |
The measured output current. |
outputMeasurementTemperature | 1.3.6.1.4.1.19947.1.3.2.1.8 | integer | read-only |
The measured temperature of the power module. Enumeration: 'failure': 127, 'ok': -128. |
outputSwitch | 1.3.6.1.4.1.19947.1.3.2.1.9 | integer | read-write |
Read: An enumerated value which shows the current state of the output channel. Write: Change the state of the channel. If the channel is On, and the write value is Off, then the channel will switch Off. If the channel is Off, and the write value is On, and if no other signals (mainInhibit, outputInhibit, outputEmergencyOff or outputFailureMaxCurrent) are active, then the channel will switch on. If the write value is resetEmergencyOff, then the channel will leave the state EmergencyOff. A write of clearEvents is necessary before the voltage can ramp up again. If the write value is setEmergencyOff, then the channel will have the state EmergencyOff, which means that the High Voltage will switch off without a ramp and reset of the outputVoltage to null volt. If the write value is clearEvents, then all failure messages of the outputStatus will be reset (all channel events, all module events and the state emergencyOff). Enumeration: 'setVoltageRippleMeasurementOff': 20, 'setRippleMeasurementOn': 22, 'off': 0, 'setVoltageRippleMeasurementOn': 23, 'resetEmergencyOff': 2, 'on': 1, 'setEmergencyOff': 3, 'clearEvents': 10, 'setVoltageMeasurementOn': 21. |
outputVoltage | 1.3.6.1.4.1.19947.1.3.2.1.10 | float | read-write |
The nominal output voltage of the channel. |
outputAdjustVoltage | 1.3.6.1.4.1.19947.1.3.2.1.11 | integer32 | read-write |
A posibillity to make small changes of the output voltage. |
outputCurrent | 1.3.6.1.4.1.19947.1.3.2.1.12 | float | read-write |
The current limit of the channel. |
outputVoltageRiseRate | 1.3.6.1.4.1.19947.1.3.2.1.13 | float | read-write |
Voltage Fall Slew Rate [V/s]. The slew rate of the output voltage if it increases (after switch on or if the Voltage has been changed). |
outputVoltageFallRate | 1.3.6.1.4.1.19947.1.3.2.1.14 | float | read-write |
Voltage Rise Slew Rate [V/s]. The slew rate of the output voltage if it decreases (after switch off or if the Voltage has been changed). |
outputSupervisionBehavior | 1.3.6.1.4.1.19947.1.3.2.1.15 | integer32 | read-write |
A bit field packed into an integer which define the behavior of the output channel / power supply after failures. For each supervision value, a two-bit field exists. The enumeration of this value (..L+..H*2) is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate. iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. The position of the bit fields in the integer value are: Bit 0, 1: outputFailureMinSenseVoltage Bit 2, 3: outputFailureMaxSenseVoltage Bit 4, 5: outputFailureMaxTerminalVoltage Bit 6, 7: outputFailureMaxCurrent Bit 8, 9: outputFailureMaxTemperature Bit 10, 11: outputFailureMaxPower Bit 12, 13: outputFailureInhibit Bit 14, 15: outputFailureTimeout |
outputSupervisionMinSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.16 | float | read-write |
If the measured sense voltage is below this value, the power supply performs the function defined by SupervisionAction. |
outputSupervisionMaxSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.17 | float | read-write |
If the measured sense voltage is above this value, the power supply performs the function defined by SupervisionAction. |
outputSupervisionMaxTerminalVoltage | 1.3.6.1.4.1.19947.1.3.2.1.18 | float | read-write |
If the measured voltage at the power supply output terminals is above this value, the power supply performs the function defined by SupervisionAction. |
outputSupervisionMaxCurrent | 1.3.6.1.4.1.19947.1.3.2.1.19 | float | read-write |
If the measured current is above this value, the power supply performs the function defined by SupervisionAction. |
outputSupervisionMaxTemperature | 1.3.6.1.4.1.19947.1.3.2.1.20 | integer32 | read-write |
If the measured module temperature is above this value, the power supply performs the function defined by SupervisionAction. |
outputConfigMaxSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.21 | float | read-write |
The maximum possible value of the sense voltage |
outputConfigMaxTerminalVoltage | 1.3.6.1.4.1.19947.1.3.2.1.22 | float | read-write |
The maximum possible value of the terminal voltage |
outputConfigMaxCurrent | 1.3.6.1.4.1.19947.1.3.2.1.23 | float | read-write |
The maximum possible value of the output current |
outputSupervisionMaxPower | 1.3.6.1.4.1.19947.1.3.2.1.24 | float | read-write |
If the measured power (measured current * measured terminal voltage) is above this value, the power supply performs the function defined by SupervisionAction. |
outputCurrentRiseRate | 1.3.6.1.4.1.19947.1.3.2.1.25 | float | read-write |
Current Fall Slew Rate [A/s]. The slew rate of the output current if it increases (after switch on or if the Current has been changed). |
outputCurrentFallRate | 1.3.6.1.4.1.19947.1.3.2.1.26 | float | read-write |
Current Rise Slew Rate [A/s]. The slew rate of the output current if it decreases (after switch off or if the Current has been changed). |
outputTripTimeMaxCurrent | 1.3.6.1.4.1.19947.1.3.2.1.27 | outputtriptime | read-write |
Minimum time the outputSupervisionMaxCurrent threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior (bit field outputFailureMaxCurrent) or the new outputTripActionMaxCurrent. |
outputHardwareLimitVoltage | 1.3.6.1.4.1.19947.1.3.2.1.28 | float | read-only |
Hardware Voltage Limit [V]. Potentiometer to adjust the global hardware voltage limit (for all channels of a module). |
outputHardwareLimitCurrent | 1.3.6.1.4.1.19947.1.3.2.1.29 | float | read-only |
Hardware Current Limit [A]. Potentiometer to adjust the global hardware current limit (for all channels of a module). |
outputConfigGainSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.30 | float | read-write |
The gain value of the sense voltage |
outputConfigOffsetSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.31 | float | read-write |
The offset value of the sense voltage |
outputConfigGainTerminalVoltage | 1.3.6.1.4.1.19947.1.3.2.1.32 | float | read-write |
The gain value of the sense voltage |
outputConfigOffsetTerminalVoltage | 1.3.6.1.4.1.19947.1.3.2.1.33 | float | read-write |
The offset value of the sense voltage |
outputConfigGainCurrent | 1.3.6.1.4.1.19947.1.3.2.1.34 | float | read-write |
The gain value of the sense voltage |
outputConfigOffsetCurrent | 1.3.6.1.4.1.19947.1.3.2.1.35 | float | read-write |
The offset value of the sense voltage |
outputUserConfig | 1.3.6.1.4.1.19947.1.3.2.1.37 | integer32 | read-write |
Definition of user-changeable items. A bit field packed into an integer which define the behavior of the output channel. Usable for WIENER LV devices only. The position of the bit fields in the integer value are: Bit 0: Voltage ramping at switch off: 0: Ramp down at switch off. 1: No ramp at switch off (immediate off) Bit 1, 2: Set different regulation modes, dependent on the cable inductance: 0: fast: short cables, up to 1 meter. 1: moderate: cables from 1 to 30 meter. 2: fast: identical to 0 (should not be used) 3: slow: cables longer than 30 meter. Bit 3: Internal sense line connection to the output (MPOD only): 0: The sense input at the sense connector is used for regulation. 1: The output voltage is used for regulation. Any signals at the sense connector are ignored. Bit 4: Enable External Inhibit input. 0: The external inhibit input is ignored. 1: The external inhibit input must be connected to a voltage source to allow switch on. Bit 5: Disable Global Inhibit inputs. 0: The global inhibit/interlock inputs of the system is active. 1: The global inhibit/interlock inputs of the system is ignored. Bit 6: Automatic Power On. 0: After switching the main system switch ON, the output is not switched on automatically. A separate outputSwitch command is required. 1: After switching the main system switch ON, the output is switched on automatically. If 'Disable Global Inhibit' (bit 5) is set, the output will be switched on regardless of the global inhibit/interlock signals. Community required for write access: guru. |
outputRegulationMode | 1.3.6.1.4.1.19947.1.3.2.1.38 | integer | read-write |
Definition of the regulation mode. Deprecated, use outputUserConfig for this function in the future! It is possible to set different regulation modes, dependent on the cable inductance. fast: short cables, up to 1 meter. moderate: cables from 1 to 30 meter. slow: cables longer than 30 meter. Community required for write access: guru. Enumeration: 'slow': 2, 'moderate': 1, 'fast': 0. |
outputConfigMaxTemperature | 1.3.6.1.4.1.19947.1.3.2.1.39 | integer32 | read-write |
The maximum possible value of outputSupervisionMaxTemperature. |
outputResistance | 1.3.6.1.4.1.19947.1.3.2.1.40 | float | read-write |
Item to specify an external resistor. For instance a wire resistor or an external resistor to protect the detectot which is supplied by a cascaded HV module. |
outputTripTimeMinSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.41 | outputtriptime | read-write |
Minimum time the outputSupervisionMinSenseVoltage threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMinSenseVoltage. |
outputTripTimeMaxSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.42 | outputtriptime | read-write |
Minimum time the outputSupervisionMaxSenseVoltage threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMaxSenseVoltage. |
outputTripTimeMaxTerminalVoltage | 1.3.6.1.4.1.19947.1.3.2.1.43 | outputtriptime | read-write |
Minimum time the outputSupervisionMaxTerminalVoltage threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMaxTerminalVoltage. |
outputTripTimeMaxTemperature | 1.3.6.1.4.1.19947.1.3.2.1.44 | outputtriptime | read-write |
Minimum time the outputSupervisionMaxTemperature threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMaxTemperature. |
outputTripTimeMaxPower | 1.3.6.1.4.1.19947.1.3.2.1.45 | outputtriptime | read-write |
Minimum time the outputSupervisionMaxPower threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMaxPower. |
outputTripTimeTimeout | 1.3.6.1.4.1.19947.1.3.2.1.46 | outputtriptime | read-write |
Maximum time the communication between module and controller can paused before activation the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionTimeout. |
outputTripActionMinSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.47 | outputtripaction | read-write |
Trip action if outputSuperisionMinSenseVoltage threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 0..1 of outputSupervisionBehavior. |
outputTripActionMaxSenseVoltage | 1.3.6.1.4.1.19947.1.3.2.1.48 | outputtripaction | read-write |
Trip action if outputSuperisionMaxSenseVoltage threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 2..3 of outputSupervisionBehavior. |
outputTripActionMaxTerminalVoltage | 1.3.6.1.4.1.19947.1.3.2.1.49 | outputtripaction | read-write |
Trip action if outputSuperisionMaxTerminalVoltage threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 4..5 of outputSupervisionBehavior. |
outputTripActionMaxCurrent | 1.3.6.1.4.1.19947.1.3.2.1.50 | outputtripaction | read-write |
Trip action if outputSuperisionMaxCurrent threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate. iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 6..7 of outputSupervisionBehavior. |
outputTripActionMaxTemperature | 1.3.6.1.4.1.19947.1.3.2.1.51 | outputtripaction | read-write |
Trip action if outputSuperisionMaxTemperature threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 8..9 of outputSupervisionBehavior. |
outputTripActionMaxPower | 1.3.6.1.4.1.19947.1.3.2.1.52 | outputtripaction | read-write |
Trip action if outputSuperisionMaxPower threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 10..11 of outputSupervisionBehavior. |
outputTripActionExternalInhibit | 1.3.6.1.4.1.19947.1.3.2.1.53 | outputtripaction | read-write |
Trip action if the external inhibit input has been activated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 12..13 of outputSupervisionBehavior. |
outputTripActionTimeout | 1.3.6.1.4.1.19947.1.3.2.1.54 | outputtripaction | read-write |
Trip action if the communication between module and controller has been paused longer than outputTripTimeTimeout. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 14..15 of outputSupervisionBehavior. |
outputConfigDataS | 1.3.6.1.4.1.19947.1.3.2.1.1024 | octet string | read-write |
Configuration Data raw access. This allows to read / write output channel specific user configuration data. This OID is intended for use by WIENER system software only and my not be accessed directly. snmpget: undefined behavior snmpset: OCTET STRING format for reading data (8 octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit OCTET STRING format used for writing data, or returned from the SNMP client after read/write (8+n octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit data numberOfOctets octets |
outputConfigDataU | 1.3.6.1.4.1.19947.1.3.2.1.1025 | octet string | read-write |
Configuration Data raw access. This allows to read / write output channel specific user configuration data. This OID is intended for use by WIENER system software only and my not be accessed directly. snmpget: undefined behavior snmpset: OCTET STRING format for reading data (8 octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit OCTET STRING format returned from the SNMP client, or used for writing data (8+n octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit data numberOfOctets octets |
groupsNumber | 1.3.6.1.4.1.19947.1.3.3 | integer32 | read-only |
The number of output groups of the crate. |
groupsTable | 1.3.6.1.4.1.19947.1.3.4 | no-access |
A list of output groups entries. |
|
1.3.6.1.4.1.19947.1.3.4.1 | no-access |
A table row |
||
groupsIndex | 1.3.6.1.4.1.19947.1.3.4.1.1 | integer32 | no-access |
A unique number for each power output group. Its value ranges between 1 and 1999. The special group 0 is predefined and gives access to all channels. |
groupsSwitch | 1.3.6.1.4.1.19947.1.3.4.1.9 | integer | read-write |
Read: This function is not defined with groups of output channels. Write: Switch the state of all channels of a group. If any channel is On, and the write value is Off, then all channels will switch off. If any channel is Off, and the write value is On, and if no other signals (mainInhibit, outputInhibit, outputEmergencyOff or outputFailureMaxCurrent) are active, then all channels will switch on. If the write value is resetEmergencyOff, then all channels will leave the state EmergencyOff. A write of clearEvents is necessary before the voltage can ramp up again. If the write value is setEmergencyOff, then all channels will have the state EmergencyOff, which means that the High Voltage will switch off without a ramp and reset of the outputVoltage to null volt. If the write value is disableKILL, then all channels will switch to disableKill (outputStatus outputDisableKill). If the write value is enableKILL, then all channels will switch to enableKill (outputStatus outputEnableKill). If the write value is clearEvents, then all failure messages of the outputStatus will be cleared (all channel events, all module events and the state outputEmergencyOff will be reset). For a detailed description of the different group numbers available look at the outputGroup OID above. Enumeration: 'on': 1, 'off': 0, 'undefined': -1, 'resetEmergencyOff': 2, 'setEmergencyOff': 3, 'enableKill': 5, 'enableAdjust': 7, 'clearEvents': 10, 'disableAdjust': 6, 'disableKill': 4. |
moduleNumber | 1.3.6.1.4.1.19947.1.3.5 | integer32 | read-only |
The number of HV/LV modules of the crate. |
moduleTable | 1.3.6.1.4.1.19947.1.3.6 | no-access |
A list of output module entries. |
|
1.3.6.1.4.1.19947.1.3.6.1 | no-access |
A row in the table of HV/LV modules |
||
moduleIndex | 1.3.6.1.4.1.19947.1.3.6.1.1 | integer | no-access |
A unique number for each HV/LV module. Its value ranges between 1 and the total number of HV/LV modules. Note, index 1 corresponds to ma0. Enumeration: 'ma1': 2, 'ma0': 1, 'ma3': 4, 'ma2': 3, 'ma5': 6, 'ma4': 5, 'ma7': 8, 'ma6': 7, 'ma9': 10, 'ma8': 9. |
moduleDescription | 1.3.6.1.4.1.19947.1.3.6.1.2 | octet string | read-only |
Vendor, FirmwareName, ChannelNumber, SerialNumber, FirmwareRelease Vendor WIENER or iseg FirmwareName: 'E16D0' EDS 16 channels per PCB, distributor module, range of Vmax from VO max to (VO max - 1kV) 'E16D1' EDS 16 channels per PCB, distributor module 'E08C0' EHS 8 channels per PCB, common GND module 'E08F0' EHS 8 channels per PCB, floating GND module 'E08F2' EHS 8 channels per PCB, floating GND module, 2 current measurement ranges 'E08C2' EHS 8 channels per PCB, common floating GND module, 2 current measurement ranges 'E08B0' EBS 8 bipolars channel per PCB, distributor module 'H101C0' HPS 1 channel HV high power supply ChannelNumber 1 to 64 SerialNumber 71xxxx FirmwareRelease x.xx |
moduleAuxiliaryMeasurementVoltage | 1.3.6.1.4.1.19947.1.3.6.1.3 |
The measured module auxiliary voltages. |
||
moduleAuxiliaryMeasurementVoltage0 | 1.3.6.1.4.1.19947.1.3.6.1.3.1 | float | read-only |
The measured module auxiliary voltage. |
moduleAuxiliaryMeasurementVoltage1 | 1.3.6.1.4.1.19947.1.3.6.1.3.2 | float | read-only |
The measured module auxiliary voltage. |
moduleHardwareLimitVoltage | 1.3.6.1.4.1.19947.1.3.6.1.4 | float | read-only |
The module hardware voltage limit. |
moduleHardwareLimitCurrent | 1.3.6.1.4.1.19947.1.3.6.1.5 | float | read-only |
The module hardware current limit. |
moduleRampSpeedVoltage | 1.3.6.1.4.1.19947.1.3.6.1.6 | float | read-write |
The module voltage ramp speed (iseg HV modules have the same ramp speed value for all channels). |
moduleRampSpeedCurrent | 1.3.6.1.4.1.19947.1.3.6.1.7 | float | read-write |
The module current ramp speed (iseg HV modules have the same ramp speed value for all channels). |
moduleStatus | 1.3.6.1.4.1.19947.1.3.6.1.8 | bits | read-only |
A bit string which shows the current module status. If a bit is set (1), the explanation is satisfied: moduleIsFineAdjustment (0), Module has reached state fine adjustment. moduleIsLiveInsertion (2), Module is in state live insertion. moduleNeedService (4), Hardware failure detected (consult iseg Spezialelektronik GmbH). moduleIsHardwareLimitVoltageGood (5), Hardware limit voltage in proper range, using for HV distributor modules with current mirror only. moduleIsInputError (6), Input error in connection with a module access. moduleIsNoSumError (8), All channels without any failure. moduleIsNoRamp (9), All channels stable, no is ramp active. moduleIsSafetyLoopGood (10), Safety loop is closed. moduleIsEventActive (11), Any event is active and mask is set. moduleIsGood (12), Module state is good. moduleIsSupplyGood (13), Power supply is good. moduleIsTemperatureGood (14), Module temperature is good. moduleIsKillEnable (15) Module state of kill enable. Bits: 'moduleIsLiveInsertion': 2, 'moduleTemperatureIsGood': 14, 'moduleNeedService': 4, 'moduleIsNoSumError': 8, 'moduleIsKillEnable': 15, 'moduleSupplyIsGood': 13, 'moduleIsGood': 12, 'moduleIsFineAdjustment': 0, 'moduleIsNoRamp': 9, 'moduleIsInputError': 6, 'moduleIsEventActive': 11, 'moduleIsHighVoltageOn': 3, 'moduleHardwareLimitVoltageIsGood': 5, 'moduleSafetyLoopIsGood': 10. |
moduleEventStatus | 1.3.6.1.4.1.19947.1.3.6.1.9 | bits | read-only |
A bit string which shows the current module status. If a bit is set (1), the explanation is satisfied: moduleEventPowerFail (0), Event power fail generated by the MPOD controller in order to ramp down all HV's (ramp speed=1000V/s) moduleEventLiveInsertion (2), Event live insertion to prepare a hot plug of a module moduleEventService (4), Module event: Hardware failure detected (consult iseg Spezialelektronik GmbH). moduleHardwareLimitVoltageNotGood (5), Module Event: Hardware voltage limit is not in proper range, using for HV distributor modules with current mirror only. moduleEventInputError (6), Module event: There was an input error in connection with a module access moduleEventSafetyLoopNotGood (10), Module event: Safety loop is open. moduleEventSupplyNotGood (13), Module event: At least one of the supplies is not good. moduleEventTemperatureNotGood (14), Module event: Temperature was above the permitted threshold (for EDS/EHS temperature above 55 degr.C) Bits: 'moduleHardwareLimitVoltageNotGood': 5, 'moduleEventSupplyNotGood': 13, 'moduleEventInputError': 6, 'moduleEventLiveInsertion': 2, 'moduleEventTemperatureNotGood': 14, 'moduleEventService': 4, 'moduleEventSafetyLoopNotGood': 10, 'moduleEventPowerFail': 0. |
moduleEventChannelStatus | 1.3.6.1.4.1.19947.1.3.6.1.10 | bits | read-only |
Bit field that reserves one bit for every channel. bit 0 HV channel 0 bit 1 HV channel 1 bit x HV channel x Bits: 'channel32': 32, 'channel31': 31, 'channel30': 30, 'channel33': 33, 'channel38': 38, 'channel17': 17, 'channel16': 16, 'channel15': 15, 'channel14': 14, 'channel13': 13, 'channel12': 12, 'channel11': 11, 'channel10': 10, 'channel39': 39, 'channel35': 35, 'channel34': 34, 'channel19': 19, 'channel18': 18, 'channel37': 37, 'channel36': 36, 'channel3': 3, 'channel2': 2, 'channel1': 1, 'channel0': 0, 'channel7': 7, 'channel6': 6, 'channel5': 5, 'channel4': 4, 'channel9': 9, 'channel8': 8, 'channel44': 44, 'channel45': 45, 'channel46': 46, 'channel47': 47, 'channel40': 40, 'channel41': 41, 'channel42': 42, 'channel43': 43, 'channel22': 22, 'channel23': 23, 'channel20': 20, 'channel21': 21, 'channel26': 26, 'channel27': 27, 'channel24': 24, 'channel25': 25, 'channel28': 28, 'channel29': 29. |
moduleDoClear | 1.3.6.1.4.1.19947.1.3.6.1.11 | integer | read-write |
All events of the module will be cleared. Enumeration: 'nothing': 0, 'doClear': 1. |
moduleAuxiliaryMeasurementTemperature | 1.3.6.1.4.1.19947.1.3.6.1.12 |
The number of auxiliary temperature sensors in the module. |
||
moduleAuxiliaryMeasurementTemperature0 | 1.3.6.1.4.1.19947.1.3.6.1.12.1 | float | read-only |
The measured module temperature of sensor 1. |
moduleAuxiliaryMeasurementTemperature1 | 1.3.6.1.4.1.19947.1.3.6.1.12.2 | float | read-only |
The measured module temperature of sensor 2. |
moduleAuxiliaryMeasurementTemperature2 | 1.3.6.1.4.1.19947.1.3.6.1.12.3 | float | read-only |
The measured module temperature of sensor 3. |
moduleAuxiliaryMeasurementTemperature3 | 1.3.6.1.4.1.19947.1.3.6.1.12.4 | float | read-only |
The measured module temperature of sensor 4. |
moduleConfigDataS | 1.3.6.1.4.1.19947.1.3.6.1.1024 | octet string | read-write |
Configuration Data raw access. This allows to read / write output channel specific system configuration data. This OID is intended for use by WIENER system software only and my not be accessed directly. snmpget: undefined behavior snmpset: OCTET STRING format for reading data (8 octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit OCTET STRING format returned from the SNMP client, or used for writing data (8+n octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit data numberOfOctets octets |
moduleConfigDataU | 1.3.6.1.4.1.19947.1.3.6.1.1025 | octet string | read-write |
Configuration Data raw access. This allows to read / write output channel specific user configuration data. This OID is intended for use by WIENER system software only and my not be accessed directly. snmpget: undefined behavior snmpset: OCTET STRING format for reading data (8 octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit OCTET STRING format returned from the SNMP client, or used for writing data (8+n octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit data numberOfOctets octets |
sensor | 1.3.6.1.4.1.19947.1.4 |
All objects which are associated with temperature sensors in the crate |
||
sensorNumber | 1.3.6.1.4.1.19947.1.4.1 | integer32 | read-only |
The number of temperature sensors of the crate. |
sensorTable | 1.3.6.1.4.1.19947.1.4.2 | no-access |
A (conceptual table) of temperature sensor data. |
|
1.3.6.1.4.1.19947.1.4.2.1 | no-access |
An entry (conceptual row) of the sensorTable. |
||
sensorIndex | 1.3.6.1.4.1.19947.1.4.2.1.1 | integer | no-access |
A unique number for each temperature sensor in the crate Enumeration: 'temp3': 3, 'temp2': 2, 'temp1': 1, 'temp7': 7, 'temp6': 6, 'temp5': 5, 'temp4': 4, 'temp8': 8. |
sensorTemperature | 1.3.6.1.4.1.19947.1.4.2.1.2 | integer32 | read-only |
The measured temperature of the sensor. Unused temperature probes have the special value -128 |
sensorWarningThreshold | 1.3.6.1.4.1.19947.1.4.2.1.3 | integer32 | read-write |
If the measured temperature of the sensor is higher than this value, the fan speed of the connected fan tray is increased. The value 127 has the special meaning: channel disabled. |
sensorFailureThreshold | 1.3.6.1.4.1.19947.1.4.2.1.4 | integer32 | read-write |
If the measured temperature of the sensor is higher than this value, the power supply switches off. The value 127 has the special meaning: channel disabled. |
sensorAlarmThreshold | 1.3.6.1.4.1.19947.1.4.2.1.6 | integer32 | read-write |
If the measured temperature of the sensor is much higher than this value, the fans rotate in full speed. The value 127 has the special meaning: channel disabled. |
sensorName | 1.3.6.1.4.1.19947.1.4.2.1.7 | displaystring | read-write |
A textual string containing a short name of the sensor. If the crate is equipped with an alphanumeric display, this string is shown to identify a sensor channel. |
sensorID | 1.3.6.1.4.1.19947.1.4.2.1.8 | octet string | read-write |
Shows the 1-Wire Id of the corresponding Sensor. |
sensorStatus | 1.3.6.1.4.1.19947.1.4.2.1.9 | integer32 | read-only |
A bit field packed into an integer which define the Status of the Sensors after failures. For each Status value, a two-bit field exists. Bits-Value 00 Temperature is ok 01 Temperature is over WarningThreshold 10 Temperature is over AlarmThreshold 11 Temperature is over FailureThreshold The position of the bit fields in the integer value are: Bit 0, 1: Sensor1 Bit 2, 3: Sensor2 Bit 4, 5: Sensor3 Bit 6, 7: Sensor4 Bit 8, 9: Sensor5 Bit 10, 11: Sensor6 Bit 12, 13: Sensor7 Bit 14, 15: Sensor8 |
communication | 1.3.6.1.4.1.19947.1.5 |
All objects which affect the remote control of the crate |
||
snmp | 1.3.6.1.4.1.19947.1.5.1 |
SNMP configuration. |
||
snmpCommunityTable | 1.3.6.1.4.1.19947.1.5.1.1 | no-access |
The SNMP community string table for different views. |
|
1.3.6.1.4.1.19947.1.5.1.1.1 | no-access |
One table row. |
||
snmpAccessRight | 1.3.6.1.4.1.19947.1.5.1.1.1.1 | integer | no-access |
A unique number for each access right Enumeration: 'admin': 3, 'public': 1, 'private': 2, 'gur': 4. |
snmpCommunityName | 1.3.6.1.4.1.19947.1.5.1.1.1.2 | octet string | read-write |
The SNMP community names for different views. The rights of the different communities are: public no write access private can switch power on/off, generate system reset admin can change supervision levels guru can change output voltage & current (this may destroy hardware if done wrong!) Setting a community name to a zero-length string completly disables the access to this view. If there is no higher- privileged community, the community name can only changed by direct access to the crate (not via network)! |
snmpPort | 1.3.6.1.4.1.19947.1.5.1.2 | integer32 | read-write |
The UDP port number of the SNMP protocol. A value of 0 disables all future SNMP communication! |
httpPort | 1.3.6.1.4.1.19947.1.5.1.3 | integer32 | read-write |
The TCP port number of the HTTP (web) protocol. A value of 0 disables all HTTP access. |
firmwareUpdate | 1.3.6.1.4.1.19947.1.5.1.10 | octet string | read-write |
Send a update String |
ipDynamicAddress | 1.3.6.1.4.1.19947.1.5.1.11 | ipaddress | read-only |
Shows the Ip which is currently used |
ipStaticAddress | 1.3.6.1.4.1.19947.1.5.1.12 | ipaddress | read-write |
Shows the Ip which is setted by user |
macAddress | 1.3.6.1.4.1.19947.1.5.1.13 | macaddress | read-write |
Shows the MAC of the corresponding device |
can | 1.3.6.1.4.1.19947.1.5.2 |
CAN-Bus tunnel via SNMP. |
||
canBitRate | 1.3.6.1.4.1.19947.1.5.2.1 | integer32 | read-write |
Control of the CAN-Bus. The value defines the bit rate of the CAN-bus interface. A write disconnects the CAN interface from the ISEG modules and connects it to the SNMP communication. Both the receive and transmit fifos are cleared and the CAN interface is initialized with the selected bit rate. The special bit rate 0 disables the tunnel and switches back to normal operation. |
canReceive | 1.3.6.1.4.1.19947.1.5.2.2 | octet string | read-only |
Control of the CAN-Bus Receive FIFO. A read access returns the total number of CAN messages stored in the receive fifo and the oldest message. This message is removed from the fifo. The OCTET STRING data is formatted according to the CANviaSNMP structure. |
canTransmit | 1.3.6.1.4.1.19947.1.5.2.3 | octet string | read-write |
Control of the CAN-Bus Transmit FIFO. A read access returns the total number of CAN messages stored in the transmit fifo and a NULL message. A write inserts the CAN message into the transmit fifo. This message will be transmitted via the CAN interface later. The total number of CAN messages stored in the transmit fifo and the recent message are returned. The OCTET STRING data is formatted according to the CANviaSNMP structure. |
canReceiveHv | 1.3.6.1.4.1.19947.1.5.2.4 | octet string | read-only |
Control of the internal HV CAN-Bus on the backplane Receive FIFO. A read access returns the total number of CAN messages stored in the receive fifo and the oldest message. This message is removed from the fifo. The OCTET STRING data is formatted according to the CANviaSNMP structure. |
canTransmitHv | 1.3.6.1.4.1.19947.1.5.2.5 | octet string | read-write |
Control of the internal HV CAN-Bus on the backplane. A write access with: CANID=0x600 DLC=4 DATAID=0x1001 CONTROL will switch the HV modules into a special state. CONTROL=0x0001 - enable SNMP CAN access, stop the refresh cycle for the data points of the name space CONTROL=0x0002 - disable SNMP CAN access, activate the refresh cycle for the data points of the name space A write access unequal to CANID=0x600 will be transmitted to the HV CAN on the backplane. Such a message will be transmitted immediately via the CAN interface. The OCTET STRING data is formatted according to the CANviaSNMP structure. |
canBitRateHv | 1.3.6.1.4.1.19947.1.5.2.6 | integer32 | read-write |
Control of the bit rate of the HV CAN-Bus. The value defines the bit rate of the CAN-bus interface. Possible Values are 125000 and 250000. Changing this value requires MPODC slave firmware 1.10 or above. |
powersupply | 1.3.6.1.4.1.19947.1.6 |
All objects which are specific for the power supply of the crate |
||
psSerialNumber | 1.3.6.1.4.1.19947.1.6.2 | displaystring | read-only |
The serial number of the power supply. |
psOperatingTime | 1.3.6.1.4.1.19947.1.6.3 | integer32 | read-write |
The time in seconds for how long the power supply was switched on. |
psAuxiliaryNumber | 1.3.6.1.4.1.19947.1.6.4 | integer32 | read-only |
The number of auxiliary channels of the power supply. |
psAuxiliaryTable | 1.3.6.1.4.1.19947.1.6.5 | no-access |
A list of psAuxiliary entries. |
|
1.3.6.1.4.1.19947.1.6.5.1 | no-access |
A table row |
||
psAuxiliaryIndex | 1.3.6.1.4.1.19947.1.6.5.1.1 | integer | no-access |
A unique number for each power supply auxiliary channel. Its value ranges between 1 and total number of output channels. SMI index starts at 1, so index 1 corresponds to U0. Enumeration: 'u5': 6, 'u4': 5, 'u7': 8, 'u6': 7, 'u1': 2, 'u0': 1, 'u3': 4, 'u2': 3. |
psAuxiliaryMeasurementVoltage | 1.3.6.1.4.1.19947.1.6.5.1.3 | float | read-only |
The measured power supply auxiliary output voltage. |
psAuxiliaryMeasurementCurrent | 1.3.6.1.4.1.19947.1.6.5.1.4 | float | read-only |
The measured power supply auxiliary output current. |
psDirectAccess | 1.3.6.1.4.1.19947.1.6.1024 | octet string | read-write |
Direct data transfer to the UEP6000 power supply. A read access returns nothing, a write access returns the response of the power supply. |
fantray | 1.3.6.1.4.1.19947.1.7 |
All objects which are specific for the fan tray of the crate |
||
fanSerialNumber | 1.3.6.1.4.1.19947.1.7.2 | displaystring | read-write |
The serial number of the fan tray. |
fanOperatingTime | 1.3.6.1.4.1.19947.1.7.3 | integer32 | read-write |
The time in seconds for how long the fan tray was switched on. |
fanAirTemperature | 1.3.6.1.4.1.19947.1.7.4 | integer32 | read-only |
The temperature of the fan tray inlet air. |
fanSwitchOffDelay | 1.3.6.1.4.1.19947.1.7.5 | integer32 | read-write |
The maximum time in seconds for which the fans will continue running after the power supply has been switched off. This feature is used to cool down the electronics after switching off. |
fanNominalSpeed | 1.3.6.1.4.1.19947.1.7.6 | integer32 | read-write |
The nominal fan rotation speed (RPM, Revolutions Per Minute) Value 0 does switch off the fans (only allowed if at least one rack temperature sensor is present). Values 1..1199 are not allowed |
fanNumberOfFans | 1.3.6.1.4.1.19947.1.7.7 | integer32 | read-write |
The number of installed fans |
fanSpeedTable | 1.3.6.1.4.1.19947.1.7.8 | no-access |
A list of fanSpeedEntries. |
|
1.3.6.1.4.1.19947.1.7.8.1 | no-access |
A table row |
||
fanNumber | 1.3.6.1.4.1.19947.1.7.8.1.1 | integer32 | no-access |
A unique number for each fan. |
fanSpeed | 1.3.6.1.4.1.19947.1.7.8.1.2 | integer32 | read-only |
The measured fan rotation speed (RPM, Revolutions Per Minute) |
fanMaxSpeed | 1.3.6.1.4.1.19947.1.7.9 | integer32 | read-write |
The highest allowed rotationspeed of fan. |
fanMinSpeed | 1.3.6.1.4.1.19947.1.7.10 | integer32 | read-write |
The lowest allowed Rotationspeed of fan. |
fanConfigMaxSpeed | 1.3.6.1.4.1.19947.1.7.11 | integer32 | read-write |
Hardwarelimits. Can only set by WIENER. |
fanConfigMinSpeed | 1.3.6.1.4.1.19947.1.7.12 | integer32 | read-write |
Hardwarelimits Can only set by WIENER. |
rack | 1.3.6.1.4.1.19947.1.8 |
All objects which are specific for the crate (BIN) of the crate |
||
signal | 1.3.6.1.4.1.19947.1.9 |
All objects which are associated with analog/digtal input/output in the crate |
||
numberOfAnalogInputs | 1.3.6.1.4.1.19947.1.9.1 | integer32 | read-only |
The number of additional analog inputs of the crate. |
analogInputTable | 1.3.6.1.4.1.19947.1.9.2 | no-access |
A (conceptual table) of analog input data. |
|
1.3.6.1.4.1.19947.1.9.2.1 | no-access |
An entry (conceptual row) of the analogInputTable. |
||
analogInputIndex | 1.3.6.1.4.1.19947.1.9.2.1.1 | integer32 | no-access |
A unique number for each analog input of the crate |
analogMeasurementVoltage | 1.3.6.1.4.1.19947.1.9.2.1.2 | float | read-only |
The measured voltage of the analog input. |
analogMeasurementCurrent | 1.3.6.1.4.1.19947.1.9.2.1.3 | float | read-only |
The measured current of the analog input. |
digitalInput | 1.3.6.1.4.1.19947.1.9.5 | bits | read-only |
The value of the digital inputs. Bits: 'd6': 6, 'd7': 7, 'd4': 4, 'd5': 5, 'd2': 2, 'd3': 3, 'd0': 0, 'd1': 1. |
digitalOutput | 1.3.6.1.4.1.19947.1.9.6 | bits | read-only |
The value of the digital outputs. Bits: 'd6': 6, 'd7': 7, 'd4': 4, 'd5': 5, 'd2': 2, 'd3': 3, 'd0': 0, 'd1': 1. |