VPLS-LDP-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: VPLS-LDP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, VPLS-GENERIC-MIB, SNMPv2-TC, PW-STD-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 vplsLdpMIB 1.3.6.1.2.1.10.275
Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). The initial version of this MIB module was published in RFC 7257; for full legal notices see the RFC itself. This MIB module contains managed object definitions for LDP-signaled Virtual Private LAN Services as in RFC 4762. This MIB module enables the use of any underlying pseudowire network.
         vplsLdpNotifications 1.3.6.1.2.1.10.275.0
             vplsLdpPwBindMacTableFull 1.3.6.1.2.1.10.275.0.1
The vplsLdpPwBindMacTableFull notification is generated when the number of learned MAC addresses increases to the value specified in vplsLdpPwBindMacAddressLimit.
         vplsLdpObjects 1.3.6.1.2.1.10.275.1
             vplsLdpConfigTable 1.3.6.1.2.1.10.275.1.1 no-access
This table specifies information for configuring and monitoring LDP-specific parameters for Virtual Private LAN Service (VPLS).
                 vplsLdpConfigEntry 1.3.6.1.2.1.10.275.1.1.1 no-access
A row in this table represents LDP-specific information for Virtual Private LAN Service (VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VPLS. A row is automatically created when a VPLS service is configured using LDP signaling. All of the writable objects values can be changed when vplsConfigRowStatus is in the active(1) state.
                     vplsLdpConfigMacAddrWithdraw 1.3.6.1.2.1.10.275.1.1.1.1 truthvalue read-write
This object specifies if MAC address withdrawal is enabled in this service. If this object is 'true', then MAC address withdrawal is enabled. If 'false', then MAC address withdrawal is disabled.
             vplsLdpPwBindTable 1.3.6.1.2.1.10.275.1.2 no-access
This table provides LDP-specific information for an association between a VPLS service and the corresponding pseudowires. A service can have more than one pseudowire association. Pseudowires are defined in the pwTable.
                 vplsLdpPwBindEntry 1.3.6.1.2.1.10.275.1.2.1 no-access
Each row represents an association between a VPLS instance and one or more pseudowires defined in the pwTable. Each index is unique in describing an entry in this table. However, both indexes are required to define the one-to-many association of service to pseudowire. An entry in this table in instantiated only when LDP signaling is used to configure VPLS service. Each entry in this table provides LDP-specific information for the VPLS represented by vplsConfigIndex.
                     vplsLdpPwBindMacAddressLimit 1.3.6.1.2.1.10.275.1.2.1.1 unsigned32 read-write
The value of this object specifies the maximum number of learned and static entries allowed in the Forwarding database for this PW Binding. The value 0 means there is no limit for this PW Binding.
         vplsLdpConformance 1.3.6.1.2.1.10.275.2
             vplsLdpCompliances 1.3.6.1.2.1.10.275.2.1
                 vplsLdpModuleFullCompliance 1.3.6.1.2.1.10.275.2.1.1
Compliance requirement for implementations that provide full support for VPLS-LDP-MIB. Such devices can then be monitored and configured using this MIB module.
                 vplsLdpModuleReadOnlyCompliance 1.3.6.1.2.1.10.275.2.1.2
Compliance requirement for implementations that only provide read-only support for VPLS-LDP-MIB. Such devices can then be monitored but cannot be configured using this MIB modules.
             vplsLdpGroups 1.3.6.1.2.1.10.275.2.2
                 vplsLdpGroup 1.3.6.1.2.1.10.275.2.2.1
The group of objects supporting management of L2VPN VPLS services using LDP.
                 vplsLdpNotificationGroup 1.3.6.1.2.1.10.275.2.2.2
The group of notifications supporting the Notifications generated for VPLS LDP Service.