VPLS-DRAFT-00-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: VPLS-DRAFT-00-MIB
Download as:   
SNMPv2-CONF, VPN-TC-STD-MIB, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, PW-TC-STD-MIB, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 vplsDraft00MIB 1.3.6.1.2.1.10.1
Copyright (C) The Internet Society (2006). The initial version of this MIB module was published in RFC XXXX. -- RFC Editor: Please replace XXXX with RFC number & remove -- this note. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains managed object definitions for Virtual Private LAN Services as in [VPLS-LDP] This MIB module enables the use of any underlying Pseudo Wire network. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC XXX; see the RFC itself for full legal notices. -- RFC Ed.: replace XXX with actual RFC number & remove this -- note
     vplsNotifications 1.3.6.1.2.1.10.1.0
         vplsStatusChanged 1.3.6.1.2.1.10.1.0.1
The vplsStatusChanged notification is generated when there is a change in the administrative or operating status of a VPLS service.
         vplsFwdFullAlarmRaised 1.3.6.1.2.1.10.1.0.2
The vplsFwdFullAlarmRaised notification is generated when the utilization of the Forwarding database is above the value specified by vplsConfigFwdFullHighWatermark.
         vplsFwdFullAlarmCleared 1.3.6.1.2.1.10.1.0.3
The vplsFwdFullAlarmCleared notification is generated when the utilization of the Forwarding database is below the value specified by vplsConfigFwdFullLowWatermark.
     vplsObjects 1.3.6.1.2.1.10.1.1
         vplsIndexNext 1.3.6.1.2.1.10.1.1.1 unsigned32 read-only
This object contains an appropriate value to be used for vplsIndex when creating entries in the vplsConfigTable. The value 0 indicates that no unassigned entries are available. To obtain the value of vplsIndex for a new entry in the vplsTable, the manager issues a management protocol retrieval operation to obtain the current value of vplsIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
         vplsConfigTable 1.3.6.1.2.1.10.1.1.2 no-access
This table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS).
             vplsConfigEntry 1.3.6.1.2.1.10.1.1.2.1 no-access
A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsIndex, which uniquely identifies a single VPLS. A row is created by the operator or by the agent if a VPLS service is created by non-SNMP application or due to autodiscovery process. None of the read-create objects values can be changed when vplsRowStatus is in the active(1) state. Changes are allowed when the vplsRowStatus is in notInService(2) or notReady(3) states only. If the operator need to change one of the values for an active row the vplsRowStatus should be first changed to notInService(2), the objects may be changed now, and later to active(1) in order to re-initiate the signaling process with the new values in effect.
                 vplsIndex 1.3.6.1.2.1.10.1.1.2.1.1 unsigned32 no-access
Unique index for the conceptual row identifying a VPLS service.
                 vplsName 1.3.6.1.2.1.10.1.1.2.1.2 snmpadminstring read-only
A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string.
                 vplsDescr 1.3.6.1.2.1.10.1.1.2.1.3 snmpadminstring read-only
A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length octet string.
                 vplsAdminStatus 1.3.6.1.2.1.10.1.1.2.1.4 integer read-only
The desired administrative state of the VPLS service. If the administrative status of the Vpls service is changed to enable then this service is able to utilize the pseudo wire to perform the tasks of a VPLS service. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                 vplsOperStatus 1.3.6.1.2.1.10.1.1.2.1.5 integer read-only
The current operational state of this VPLS Service. Enumeration: 'down': 2, 'unknown': 0, 'up': 1.
                 vplsMacLearning 1.3.6.1.2.1.10.1.1.2.1.6 truthvalue read-only
This object specifies if MAC Learning is enabled in this service. If this object is true then Mac Learning is enabled. If false, then Mac Learning is disabled.
                 vplsDiscardUnknownDest 1.3.6.1.2.1.10.1.1.2.1.7 truthvalue read-only
If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are processed.
                 vplsMacAging 1.3.6.1.2.1.10.1.1.2.1.8 truthvalue read-only
If the value of this object is 'true' then the MAC ageing process is enabled in this VPLS. If 'false', then the MAC ageing process is disabled
                 vplsVpnId 1.3.6.1.2.1.10.1.1.2.1.9 vpnidorzero read-only
This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service.
                 vplsConfigFwdFullHighWatermark 1.3.6.1.2.1.10.1.1.2.1.10 unsigned32 read-only
This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmRaised notification will be sent.
                 vplsConfigFwdFullLowWatermark 1.3.6.1.2.1.10.1.1.2.1.11 unsigned32 read-only
This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmCleared notification will be sent.
                 vplsRowStatus 1.3.6.1.2.1.10.1.1.2.1.12 rowstatus read-only
For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
         vplsPwBindTable 1.3.6.1.2.1.10.1.1.3 no-access
This table provides an association between a VPLS service and the corresponding Pseudo Wires. A service can have more than one Pseudo Wire association. Pseudo Wires are defined in the pwTable [PWE3-PW-MIB]
             vplsPwBindEntry 1.3.6.1.2.1.10.1.1.3.1 no-access
Each row represents an association between a VPLS instance and one or more Pseudo Wires defined in the pwTable. Each index is unique in describing an entry in this table. However both indexes are required to define the one to many association of service to pseudowire.
                 vplsPwIndex 1.3.6.1.2.1.10.1.1.3.1.1 pwindextype no-access
Secondary Index for the conceptual row identifying a pseudowire within the PwEntry which MUST match an entry from the PW-STD-MIB's PwTable which represents an already-provisioned pseuwowire that is then associated with this VPLS instance.
                 vplsPwBindBindType 1.3.6.1.2.1.10.1.1.3.1.2 integer read-only
The value of this object indicates whether the Pseudo Wire binding was created manually or via autodiscovery. The value of this object must be specifed when the row is created and cannot be changed while the row status is active(1) Enumeration: 'autodiscovery': 2, 'manual': 1.
                 vplsPwBindMacAddressLimit 1.3.6.1.2.1.10.1.1.3.1.3 unsigned32 read-only
The value of this object specifies the maximum number of learned and static entries allowed in the Forwarding database for this PW Binding. The value 0 means there is no limit for this PW Binding.
                 vplsPwBindRowStatus 1.3.6.1.2.1.10.1.1.3.1.4 rowstatus read-only
For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state
         vplsStatusNotifEnable 1.3.6.1.2.1.10.1.1.4 truthvalue read-write
If this object is set to true(1), then it enables the emission of vplsStatusChanged notification; otherwise this notification is not emitted.
         vplsNotificationMaxRate 1.3.6.1.2.1.10.1.1.5 unsigned32 read-write
This object indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these notifications during that period, or may queue them until an appropriate time. A value of 0 means no throttling is applied and events may be notified at the rate at which they occur.
     vplsConformance 1.3.6.1.2.1.10.1.2
         vplsCompliances 1.3.6.1.2.1.10.1.2.1
             vplsModuleReadOnlyCompliance 1.3.6.1.2.1.10.1.2.1.1
Compliance requirement for implementations that only provide read-only support for VPLS-DRAFT-00-MIB. Such devices can then be monitored but cannot be configured using this MIB modules.
         vplsGroups 1.3.6.1.2.1.10.1.2.2
             vplsGroup 1.3.6.1.2.1.10.1.2.2.1
The group of objects supporting management of L2VPN VPLS services
             vplsPwBindGroup 1.3.6.1.2.1.10.1.2.2.2
The group of objects supporting management of Pseudo Wire (PW) Binding to VPLS.
             vplsNotificationGroup 1.3.6.1.2.1.10.1.2.2.3
The group of notifications supporting the Notifications generated for VPLS Services