VOLIUS-OT-MIB: View SNMP OID List / Download MIB

VENDOR: IPF TECHNOLOGY LTD


 Home MIB: VOLIUS-OT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 volius 1.3.6.1.4.1.34652
             vlsGlobalModule 1.3.6.1.4.1.34652.1
This MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical transmitters.
             vlsSystem 1.3.6.1.4.1.34652.2
                 vlsSystemGeneral 1.3.6.1.4.1.34652.2.10
                       vlsModelName 1.3.6.1.4.1.34652.2.10.1 displaystring read-only
                       vlsSerialNumber 1.3.6.1.4.1.34652.2.10.2 displaystring read-only
                       vlsFirmwareVersion 1.3.6.1.4.1.34652.2.10.3 displaystring read-only
                       vlsBootLoaderVersion 1.3.6.1.4.1.34652.2.10.4 displaystring read-only
                       vlsDateAndTime 1.3.6.1.4.1.34652.2.10.5 dateandtime read-only
                       vlsTimeZone 1.3.6.1.4.1.34652.2.10.6 integer32 read-write
Difference between local and UTC in minutes.
                       vlsCaseTemperature 1.3.6.1.4.1.34652.2.10.7 vlsdecicelsius read-only
                       vlsFanSpeed 1.3.6.1.4.1.34652.2.10.8 vlsrpm read-only
                       vlsSupplyVoltageTable 1.3.6.1.4.1.34652.2.10.9 no-access
                           vlsSupplyVoltageEntry 1.3.6.1.4.1.34652.2.10.9.1 no-access
                               vlsSupplyVoltageIndex 1.3.6.1.4.1.34652.2.10.9.1.1 integer32 read-only
                               vlsSupplyVoltageNominal 1.3.6.1.4.1.34652.2.10.9.1.2 vlsmillivolt read-only
                               vlsSupplyVoltageActual 1.3.6.1.4.1.34652.2.10.9.1.3 vlsmillivolt read-only
                 vlsNetworkServices 1.3.6.1.4.1.34652.2.11
                       vlsNetworkAddress 1.3.6.1.4.1.34652.2.11.5
                           vlsMacAddress 1.3.6.1.4.1.34652.2.11.5.1 macaddress read-write
                           vlsIpAddress 1.3.6.1.4.1.34652.2.11.5.2 inetaddressipv4 read-write
                           vlsNetMask 1.3.6.1.4.1.34652.2.11.5.3 inetaddressipv4 read-write
                           vlsDefaultGateway 1.3.6.1.4.1.34652.2.11.5.4 inetaddressipv4 read-write
                       vlsHttp 1.3.6.1.4.1.34652.2.11.6
                           vlsHttpPort 1.3.6.1.4.1.34652.2.11.6.1 integer32 read-write
                           vlsHttpEnabled 1.3.6.1.4.1.34652.2.11.6.2 vlsonoff read-write
                           vlsHttpPasswordEnabled 1.3.6.1.4.1.34652.2.11.6.3 vlsonoff read-write
                       vlsSnmp 1.3.6.1.4.1.34652.2.11.7
                           vlsSnmpPort 1.3.6.1.4.1.34652.2.11.7.1 integer32 read-write
                           vlsTrapDestTable 1.3.6.1.4.1.34652.2.11.7.2 no-access
                               vlsTrapDestEntry 1.3.6.1.4.1.34652.2.11.7.2.1 no-access
                                   vlsTrapDestIndex 1.3.6.1.4.1.34652.2.11.7.2.1.1 integer32 read-only
                                   vlsTrapDestAddr 1.3.6.1.4.1.34652.2.11.7.2.1.2 inetaddressipv4 read-write
                                   vlsTrapDestPort 1.3.6.1.4.1.34652.2.11.7.2.1.3 integer32 read-write
                                   vlsTrapDestEnable 1.3.6.1.4.1.34652.2.11.7.2.1.4 vlsonoff read-write
                       vlsSntp 1.3.6.1.4.1.34652.2.11.8
                           vlsSntpServerAddr 1.3.6.1.4.1.34652.2.11.8.1 inetaddressipv4 read-write
                           vlsSntpServerPort 1.3.6.1.4.1.34652.2.11.8.2 integer32 read-write
                           vlsSntpEnabled 1.3.6.1.4.1.34652.2.11.8.3 vlsonoff read-write
                 vlsEventLog 1.3.6.1.4.1.34652.2.13
                       vlsLastEventCode 1.3.6.1.4.1.34652.2.13.1 vlsevent read-only
                       vlsLastEventIndex 1.3.6.1.4.1.34652.2.13.2 integer32 read-only
                       vlsEventLogSize 1.3.6.1.4.1.34652.2.13.3 integer32 read-only
Number of events stored in the log.
                       vlsEventLogTable 1.3.6.1.4.1.34652.2.13.4 no-access
                           vlsEventLogEntry 1.3.6.1.4.1.34652.2.13.4.1 no-access
                               vlsEventIndex 1.3.6.1.4.1.34652.2.13.4.1.1 integer32 read-only
                               vlsEventCode 1.3.6.1.4.1.34652.2.13.4.1.2 vlsevent read-only
                               vlsEventTimeStamp 1.3.6.1.4.1.34652.2.13.4.1.3 timeticks read-only
                               vlsEventDateTime 1.3.6.1.4.1.34652.2.13.4.1.4 dateandtime read-only
                               vlsEventMessage 1.3.6.1.4.1.34652.2.13.4.1.5 displaystring read-only
                       vlsEventTrap 1.3.6.1.4.1.34652.2.13.8
                 vlsAlarms 1.3.6.1.4.1.34652.2.14
                       vlsAlarmsActiveMask 1.3.6.1.4.1.34652.2.14.1 integer32 read-only
This is a bit mask where all active alarms are combined. Alarms are latching, that is an alarm is still active even when the condition activating the alarm no longer exists.
                       vlsAlarmsResetMask 1.3.6.1.4.1.34652.2.14.2 integer32 read-write
You can write reset mask to reset individual alarms. An alarm will be reset only if the activating condition no longer exists.
                       vlsAlarmsTable 1.3.6.1.4.1.34652.2.14.3 no-access
                           vlsAlarmsEntry 1.3.6.1.4.1.34652.2.14.3.1 no-access
                               vlsAlarmIndex 1.3.6.1.4.1.34652.2.14.3.1.1 integer32 read-only
                               vlsAlarmState 1.3.6.1.4.1.34652.2.14.3.1.2 vlsonoff read-write
When read, this OID indicates if the alarm is active. When vlsOff is written to this OID, the alarm is reset.
                               vlsAlarmMessage 1.3.6.1.4.1.34652.2.14.3.1.3 displaystring read-only
             vlsEdfa 1.3.6.1.4.1.34652.3
             vlsOpticalSwitch 1.3.6.1.4.1.34652.4
             vlsCatvTransmitter 1.3.6.1.4.1.34652.5
                 vlsTxEmissionState 1.3.6.1.4.1.34652.5.1 vlsonoff read-only
Reports whether the laser is on or off.
                 vlsTxOutputTable 1.3.6.1.4.1.34652.5.2 no-access
                     vlsTxOutputEntry 1.3.6.1.4.1.34652.5.2.1 no-access
                         vlsTxOutputIndex 1.3.6.1.4.1.34652.5.2.1.1 integer32 read-only
Optical output number (1 or 2).
                         vlsTxOutputPower 1.3.6.1.4.1.34652.5.2.1.2 vlsdecidbm read-only
Optical output level.
                 vlsTxPoutLowAlarm 1.3.6.1.4.1.34652.5.3 vlsdecidbm read-write
Output power low alarm threshold.
                 vlsTxPoutHighAlarm 1.3.6.1.4.1.34652.5.4 vlsdecidbm read-write
Output power high alarm threshold.
                 vlsTxInputComposite 1.3.6.1.4.1.34652.5.5 vlsdbm read-only
Composite RF level at the transmitter input.
                 vlsTxInputPerChannel 1.3.6.1.4.1.34652.5.6 vlsdbuv read-only
Per-channel RF level at the transmitter input.
                 vlsTxChannelPwrFactor 1.3.6.1.4.1.34652.5.7 vlsdecidb read-write
This factor is used to convert composite RF level to per-channel RF level. The factor is expressed in units of 0.1 dB and is always negative or zero. For example, if the channel plan is 100 channels all with the same RF level, the factor should be -200 (meaning -20.0 dB). Then, if composite RF level is 0 dBm (that is 108.75 dBuV), per-channel RF level would be 108.75 - 20 = 88.75 dBuV.
                 vlsTxOmi 1.3.6.1.4.1.34652.5.8 vlspermille read-only
Composite OMI in units of 0.1%.
                 vlsTxAtt 1.3.6.1.4.1.34652.5.9 vlsdecidb read-only
Actual variable attenuator state. The range is 0..25 dB.
                 vlsTxLaserCurrent 1.3.6.1.4.1.34652.5.10 vlspercent read-only
Laser current. 100% corresponds to the current set during factory calibration. The current is expected to rise slowly after years of operation (laser aging).
                 vlsTxLaserTecCurrent 1.3.6.1.4.1.34652.5.11 vlspercent read-only
                 vlsTxLaserPower 1.3.6.1.4.1.34652.5.12 vlsdecidbm read-only
                 vlsTxLaserTemperature 1.3.6.1.4.1.34652.5.13 vlsdecicelsius read-only
                 vlsTxAgc 1.3.6.1.4.1.34652.5.14 vlsonoff read-write
AGC mode on/off control.
                 vlsTxSetOmi 1.3.6.1.4.1.34652.5.15 vlspermille read-write
OMI setpoint when AGC is on.
                 vlsTxSetAtt 1.3.6.1.4.1.34652.5.16 vlsdecidb read-write
Variable attenuator setpoint when AGC is off.
                 vlsTxSetSbsThreshold 1.3.6.1.4.1.34652.5.17 vlsdbm read-write
SBS suppression level.
             vlsOpticalReceiver 1.3.6.1.4.1.34652.6
             vlsCabinetMonitor 1.3.6.1.4.1.34652.7
             vlsUpsMonitor 1.3.6.1.4.1.34652.8