VERILINK-ENTERPRISE-NCMISDN-MIB: View SNMP OID List / Download MIB

VENDOR: VERILINK CORP


 Home MIB: VERILINK-ENTERPRISE-NCMISDN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, VERILINK-ENTERPRISE-NCMALARM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ncmPRIPortConfigTable 1.3.6.1.4.1.321.1.3031.8000 no-access
The PRI Port Configuration table .
           ncmPRIPortConfigEntry 1.3.6.1.4.1.321.1.3031.8000.1 no-access
An entry in the PRI Port Configuration table .
               ncmPRIPortNIDIndex 1.3.6.1.4.1.321.1.3031.8000.1.1 integer read-only
The object specifies the node id of the node.
               ncmPRIPortLineIndex 1.3.6.1.4.1.321.1.3031.8000.1.2 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable.
               ncmPRIPortInService 1.3.6.1.4.1.321.1.3031.8000.1.3 integer read-write
The object specifies whether the PRI Port is in service or not. Enumeration: 'yes': 2, 'no': 1.
               ncmPRIPortNFASMode 1.3.6.1.4.1.321.1.3031.8000.1.4 integer read-write
The variable specifies the Pri NFAS mode. For DPRI card, it has selections of 1)No Nfas, 2)Nfas For QPRI card, it has selections of 1)No Nfas, 2)Nfas on 4, 3)Nfas w/D WARNING: The card must be reset for this change to take effect ! Enumeration: 'nFas': 2, 'nFas-on-4': 3, 'no-nFas': 1, 'nFas-w-D': 4.
               ncmPRIPortDChanMode 1.3.6.1.4.1.321.1.3031.8000.1.5 integer read-write
The variable specifies the pri D-channel mode. Enumeration: 'inverted': 2, 'normal': 1.
               ncmPRIPortDChanBits 1.3.6.1.4.1.321.1.3031.8000.1.6 integer read-write
The variable specifies the pri D-channel bits. Enumeration: 'chan-8-Bit': 1, 'chan-7-Bit': 2, 'chan-6-Bit': 3.
               ncmPRIPortTimeslotMap 1.3.6.1.4.1.321.1.3031.8000.1.7 displaystring read-write
The variable specifies the timeslot map.
               ncmPRIPortSwitchType 1.3.6.1.4.1.321.1.3031.8000.1.8 integer read-write
The variable specifies the pri switch type. Enumeration: 'sw-Att-5Ess': 3, 'sw-Att-Reserved': 4, 'sw-Nti-Dms100': 5, 'sw-Att-4Ess': 2, 'sw-Ni-2': 6, 'sw-Unspecified': 1.
               ncmPRIPortOwnNumPlan 1.3.6.1.4.1.321.1.3031.8000.1.9 integer read-write
The variable specifies the pri own numbering plan. Enumeration: 'unkn-NumPlan': 1, 'telephony-E163': 3, 'private': 10, 'isdn-E164': 2.
               ncmPRIPortOwnNumType 1.3.6.1.4.1.321.1.3031.8000.1.10 integer read-write
The variable specifies the pri own numbering type. Enumeration: 'international': 2, 'national': 3, 'local': 5, 'unkn-NumType': 1.
               ncmPRIPortSecurityLevel 1.3.6.1.4.1.321.1.3031.8000.1.11 integer read-write
The variable specifies the fdl mode which is bit 0 of fdl Parameter1. Enumeration: 'both-Numbers': 4, 'no-Checks': 1, 'own-Numbers': 2, 'ext-Numbers': 3.
               ncmPRIPortConfigStatus 1.3.6.1.4.1.321.1.3031.8000.1.12 integer read-only
The variable specifies the configuration result. Enumeration: 'configuration-Error': 2, 'configuration-OK': 1.
               ncmPRIPortSetConfig 1.3.6.1.4.1.321.1.3031.8000.1.13 integer read-write
The set configuration operation that involves sending out the ACP message to set the configuration with the setup parameters Enumeration: 'set-Config': 1, 'not-in-use': 2.
               ncmPRICallProfCallRefCount 1.3.6.1.4.1.321.1.3031.8000.1.14 integer read-only
The variable specifies the number of valid call reference numbers
               ncmPRIL2AutoEstablish 1.3.6.1.4.1.321.1.3031.8000.1.15 integer read-write
The object specifies whether the PRI Port has an Auto establishment for Layer-2 or not. Enumeration: 'yes': 2, 'no': 1.
               ncmPRIResetCard 1.3.6.1.4.1.321.1.3031.8000.1.16 integer read-write
The reset card operation that involves sending out the ACP message to reset the card Enumeration: 'not-in-use': 2, 'reset-Card': 1.
 ncmPRICallProfileTable 1.3.6.1.4.1.321.1.3031.8001 no-access
The PRI Call Profile table .
           ncmPRICallProfEntry 1.3.6.1.4.1.321.1.3031.8001.1 no-access
An entry in the PRI Call Profile table .
               ncmPRICallProfNIDIndex 1.3.6.1.4.1.321.1.3031.8001.1.1 integer read-only
The object specifies the node id of the node.
               ncmPRICallProfLineIndex 1.3.6.1.4.1.321.1.3031.8001.1.2 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable.
               ncmPRICPCallProfileRef 1.3.6.1.4.1.321.1.3031.8001.1.3 integer read-write
The variable specifies the number of the call profile in the list (starting from one, then two and so on).
               ncmPRICallProfCallDir 1.3.6.1.4.1.321.1.3031.8001.1.4 integer read-write
The variable specifies the call direction. Enumeration: 'outgoing': 3, 'incoming': 2, 'no-Direction': 1, 'both-Directions': 4.
               ncmPRICallProfNumOwnDigit 1.3.6.1.4.1.321.1.3031.8001.1.5 integer read-write
The variable specifies the number of own digits.
               ncmPRICallProfOwnCallNum 1.3.6.1.4.1.321.1.3031.8001.1.6 displaystring read-write
The variable specifies the own call number.
               ncmPRICallProfExtNumPlan 1.3.6.1.4.1.321.1.3031.8001.1.7 integer read-write
The variable specifies the external numbering plan. Enumeration: 'unkn-NumPlan': 1, 'telephony-E163': 3, 'private': 10, 'isdn-E164': 2.
               ncmPRICallProfExtNumType 1.3.6.1.4.1.321.1.3031.8001.1.8 integer read-write
The variable specifies the external numbering type. Enumeration: 'international': 2, 'national': 3, 'local': 5, 'unkn-NumType': 1.
               ncmPRICallProfExtNumDigit 1.3.6.1.4.1.321.1.3031.8001.1.9 integer read-write
The variable specifies the external number of digits.
               ncmPRICallProfExtCallNum 1.3.6.1.4.1.321.1.3031.8001.1.10 displaystring read-write
The variable specifies the external call number.
               ncmPRICallProfTransferMode 1.3.6.1.4.1.321.1.3031.8001.1.11 integer read-write
The variable specifies the transfer mode. Enumeration: 'unrestricted-digital': 8, 'restricted-digital': 9.
               ncmPRICallProfCallBandWth 1.3.6.1.4.1.321.1.3031.8001.1.12 integer read-write
The variable specifies the call bandwidth. Enumeration: 'h0-6X64K': 19, 'h12-30X64K': 23, 'multiRate': 24, 'h11-24X64K': 21, 'b1-64K': 16.
               ncmPRICallProfMultiRateCnt 1.3.6.1.4.1.321.1.3031.8001.1.13 integer read-write
The variable specifies the multirate count. Enumeration: 'mR-2': 2, 'mR-12': 12, 'mR-6': 6, 'mR-4': 4, 'mR-8': 8, 'mR-30': 30, 'mR-23': 23, 'mR-31': 31, 'mR-24': 24.
               ncmPRICallProfRateAdaptn 1.3.6.1.4.1.321.1.3031.8001.1.14 integer read-write
The variable specifies the rate adaptation. Enumeration: 'adapt-56K': 2, 'no-Adapt': 1.
               ncmPRICallProfTestCallIntvl 1.3.6.1.4.1.321.1.3031.8001.1.15 integer read-write
The variable specifies the test call interval.
               ncmPRICallProfCallStatus 1.3.6.1.4.1.321.1.3031.8001.1.16 integer read-only
The variable specifies the get call profile call status. Enumeration: 'fail-Takedown-Idle': 1, 'successful-Setup': 2, 'unknown': 3.
               ncmPRICallProfCallAction 1.3.6.1.4.1.321.1.3031.8001.1.17 integer read-write
The variable specifies the call profile call action. Enumeration: 'setup-Call': 1, 'takedown-Call': 2.
               ncmPRICPSetCallProf 1.3.6.1.4.1.321.1.3031.8001.1.18 integer read-write
The variable specifies the call profile call action. Enumeration: 'set-CallProf': 1, 'not-in-use': 2.
               ncmPRICPSetCallProfResp 1.3.6.1.4.1.321.1.3031.8001.1.19 integer read-only
The variable specifies the set call profile result Enumeration: 'configuration-Error': 2, 'configuration-OK': 1.
               ncmPRICPCallActionResp 1.3.6.1.4.1.321.1.3031.8001.1.20 integer read-only
The variable specifies the call action result Enumeration: 'configuration-Error': 2, 'configuration-OK': 1.
 ncmPRICallProfListTable 1.3.6.1.4.1.321.1.3031.8002 no-access
The PRI Call Profile List table .
           ncmPRICallProfListEntry 1.3.6.1.4.1.321.1.3031.8002.1 no-access
An entry in the PRI Call Profile List table .
               ncmPRICPListNIDIndex 1.3.6.1.4.1.321.1.3031.8002.1.1 integer read-only
The object specifies the node id of the node of the call profile list group.
               ncmPRICPListLineIndex 1.3.6.1.4.1.321.1.3031.8002.1.2 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable.
               ncmPRICPListIndex 1.3.6.1.4.1.321.1.3031.8002.1.3 integer read-only
The call profile list call reference index.
               ncmPRICPListValidCPRefNum 1.3.6.1.4.1.321.1.3031.8002.1.4 integer read-only
The variable is the valid call reference number.
 ncmPRICurrentTable 1.3.6.1.4.1.321.1.3031.8003 no-access
The PRI Current Interval table .
           ncmPRICurrentEntry 1.3.6.1.4.1.321.1.3031.8003.1 no-access
An entry in the PRI Current Interval table .
               ncmPRICurrNIDIndex 1.3.6.1.4.1.321.1.3031.8003.1.1 integer read-only
The object specifies the node id of the node.
               ncmPRICurrLineIndex 1.3.6.1.4.1.321.1.3031.8003.1.2 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable.
               ncmPRICurrEndType 1.3.6.1.4.1.321.1.3031.8003.1.3 integer read-only
The variable specifies the End Type . Enumeration: 'far-End': 2, 'near-End': 1.
               ncmPRICurrTimestamp 1.3.6.1.4.1.321.1.3031.8003.1.4 integer read-only
The object specifies the timestamp in seconds.
               ncmPRICurrSecsInCurrIntvl 1.3.6.1.4.1.321.1.3031.8003.1.5 integer read-only
The object specifies the seconds in current interval.
               ncmPRICurrInfoRx 1.3.6.1.4.1.321.1.3031.8003.1.6 integer read-only
The object specifies the current INFOs received.
               ncmPRICurrInfoTx 1.3.6.1.4.1.321.1.3031.8003.1.7 integer read-only
The object specifies the current INFOs transmitted.
               ncmPRICurrCRCErrRx 1.3.6.1.4.1.321.1.3031.8003.1.8 integer read-only
The object specifies the current CRC errors received.
               ncmPRICurrInvalidFrameRx 1.3.6.1.4.1.321.1.3031.8003.1.9 integer read-only
The object specifies the current invalid frames received.
               ncmPRICurrFrameAbortRx 1.3.6.1.4.1.321.1.3031.8003.1.10 integer read-only
The object specifies the current frame aborts received.
               ncmPRICurrDISCSRx 1.3.6.1.4.1.321.1.3031.8003.1.11 integer read-only
The object specifies the current DISCs received.
               ncmPRICurrDISCSTx 1.3.6.1.4.1.321.1.3031.8003.1.12 integer read-only
The object specifies the current DISCs transmitted.
               ncmPRICurrFramerRx 1.3.6.1.4.1.321.1.3031.8003.1.13 integer read-only
The object specifies the current framer received.
               ncmPRICurrFramerTx 1.3.6.1.4.1.321.1.3031.8003.1.14 integer read-only
The object specifies the current framer transmitted.
               ncmPRICurrLyr3ProtErr 1.3.6.1.4.1.321.1.3031.8003.1.15 integer read-only
The object specifies the current Layer 3 protocol errors.
               ncmPRICurrCallSetupSent 1.3.6.1.4.1.321.1.3031.8003.1.16 integer read-only
The object specifies the current call setup sent.
               ncmPRICurrCallSetupSentnFail 1.3.6.1.4.1.321.1.3031.8003.1.17 integer read-only
The object specifies the current call setup sent and failed.
               ncmPRICurrCallSetupRx 1.3.6.1.4.1.321.1.3031.8003.1.18 integer read-only
The object specifies the current call setup received.
               ncmPRICurrCallSetupRxnFail 1.3.6.1.4.1.321.1.3031.8003.1.19 integer read-only
The object specifies the current call setup received and failed.
               ncmPRICurrUnSupportMsgRx 1.3.6.1.4.1.321.1.3031.8003.1.20 integer read-only
The object specifies the current unsupported message received.
               ncmPRICurrTstCalSetupSentnFail 1.3.6.1.4.1.321.1.3031.8003.1.21 integer read-only
The object specifies the current test call setups sent and failed.
               ncmPRICurrValidIntvls 1.3.6.1.4.1.321.1.3031.8003.1.22 integer read-only
A number between 1 and 96
               ncmPRICurrStatisticReset 1.3.6.1.4.1.321.1.3031.8003.1.23 integer read-write
The variable specifies the statistic reset operation. Enumeration: 'statistic-Reset': 1.
 ncmPRIIntervalTable 1.3.6.1.4.1.321.1.3031.8004 no-access
The PRI Interval table .
           ncmPRIIntervalEntry 1.3.6.1.4.1.321.1.3031.8004.1 no-access
An entry in the PRI Interval table .
               ncmPRIntvlNIDIndex 1.3.6.1.4.1.321.1.3031.8004.1.1 integer read-only
The object specifies the node id of the node.
               ncmPRIntvlLineIndex 1.3.6.1.4.1.321.1.3031.8004.1.2 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable.
               ncmPRIntvlEndType 1.3.6.1.4.1.321.1.3031.8004.1.3 integer read-only
The variable specifies the End Type . Enumeration: 'far-End': 2, 'near-End': 1.
               ncmPRIntvlIndex 1.3.6.1.4.1.321.1.3031.8004.1.4 integer read-only
The interval index.
               ncmPRIntvlTimestamp 1.3.6.1.4.1.321.1.3031.8004.1.5 integer read-only
The object specifies the interval timestamp in seconds.
               ncmPRIntvlSecsInCurrIntvl 1.3.6.1.4.1.321.1.3031.8004.1.6 integer read-only
The object specifies the interval seconds in current interval.
               ncmPRIntvlInfoRx 1.3.6.1.4.1.321.1.3031.8004.1.7 integer read-only
The object specifies the interval INFOs received.
               ncmPRIntvlInfoTx 1.3.6.1.4.1.321.1.3031.8004.1.8 integer read-only
The object specifies the interval INFOs transmitted.
               ncmPRIntvlCRCErrRx 1.3.6.1.4.1.321.1.3031.8004.1.9 integer read-only
The object specifies the interval CRC errors received.
               ncmPRIntvlInvalidFrameRx 1.3.6.1.4.1.321.1.3031.8004.1.10 integer read-only
The object specifies the interval invalid frames received.
               ncmPRIntvlFrameAbortRx 1.3.6.1.4.1.321.1.3031.8004.1.11 integer read-only
The object specifies the interval frame aborts received.
               ncmPRIntvlDISCSRx 1.3.6.1.4.1.321.1.3031.8004.1.12 integer read-only
The object specifies the interval DISCs received.
               ncmPRIntvlDISCSTx 1.3.6.1.4.1.321.1.3031.8004.1.13 integer read-only
The object specifies the interval DISCs transmitted.
               ncmPRIntvlFramerRx 1.3.6.1.4.1.321.1.3031.8004.1.14 integer read-only
The object specifies the interval framer received.
               ncmPRIntvlFramerTx 1.3.6.1.4.1.321.1.3031.8004.1.15 integer read-only
The object specifies the interval framer transmitted.
               ncmPRIntvlLyr3ProtErr 1.3.6.1.4.1.321.1.3031.8004.1.16 integer read-only
The object specifies the interval Layer 3 protocol errors.
               ncmPRIntvlCallSetupSent 1.3.6.1.4.1.321.1.3031.8004.1.17 integer read-only
The object specifies the interval call setup sent.
               ncmPRIntvlCallSetupSentnFail 1.3.6.1.4.1.321.1.3031.8004.1.18 integer read-only
The object specifies the interval call setup sent and failed.
               ncmPRIntvlCallSetupRx 1.3.6.1.4.1.321.1.3031.8004.1.19 integer read-only
The object specifies the interval call setup received.
               ncmPRIntvlCallSetupRxnFail 1.3.6.1.4.1.321.1.3031.8004.1.20 integer read-only
The object specifies the interval call setup received and failed.
               ncmPRIntvlUnSupportMsgRx 1.3.6.1.4.1.321.1.3031.8004.1.21 integer read-only
The object specifies the interval unsupported message received.
               ncmPRIntvlTstCalSetupSentnFail 1.3.6.1.4.1.321.1.3031.8004.1.22 integer read-only
The object specifies the interval test call setups sent and failed.