VERILINK-ENTERPRISE-NCMDSU-MIB: View SNMP OID List / Download MIB

VENDOR: VERILINK CORP


 Home MIB: VERILINK-ENTERPRISE-NCMDSU-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, VERILINK-ENTERPRISE-NCMALARM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ncmdsuCommonTable 1.3.6.1.4.1.321.1.3022.2000 no-access
The ncmdsu information table.
           ncmdsuCommonEntry 1.3.6.1.4.1.321.1.3022.2000.1 no-access
An entry in the ncmdsu information table.
               ncmdsuNIDIndex 1.3.6.1.4.1.321.1.3022.2000.1.1 integer read-only
               ncmdsuIndex 1.3.6.1.4.1.321.1.3022.2000.1.2 integer read-only
               ncmdsuPortType 1.3.6.1.4.1.321.1.3022.2000.1.3 integer read-only
Enumeration: 'none': 1, 'v35': 2, 'unknown': 7, 'eia530': 4, 'wrong-DIM': 6, 'rS-232': 5, 'rs-449': 3.
               ncmdsuPortLoopback 1.3.6.1.4.1.321.1.3022.2000.1.4 integer read-write
Enumeration: 'dds-latching-loop-up': 12, 'sending-loop-up': 4, 'local-loop-up': 8, 'v54-loop-down': 11, 'v54-loop-up': 10, 'dds-nonlatching-loop-down': 15, 'ft1-loop-down': 17, 'local-loop': 3, 'verilink-loop-up': 6, 'none': 1, 'local-loop-down': 9, 'ft1-loop-up': 16, 'inband-loop': 2, 'sending-loop-down': 5, 'dds-latching-loop-down': 13, 'verilink-loop-down': 7, 'dds-nonlatching-loop-up': 14.
               ncmdsuPortTest 1.3.6.1.4.1.321.1.3022.2000.1.5 integer read-write
Enumeration: 'stop-ber-test': 4, 'run-ber-test': 3, 'no-test': 1, 'test-2047': 6, 'start-test': 2, 'test-511': 5.
 ncmdsuConfigTable 1.3.6.1.4.1.321.1.3022.2001 no-access
The ncmdsu Configuration table.
           ncmdsuConfigEntry 1.3.6.1.4.1.321.1.3022.2001.1 no-access
An entry in the ncmdsu Configuration table.
               ncmdsuNIDConfigIndex 1.3.6.1.4.1.321.1.3022.2001.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmdsuLineIndex 1.3.6.1.4.1.321.1.3022.2001.1.2 integer read-only
               ncmdsubus 1.3.6.1.4.1.321.1.3022.2001.1.3 integer read-write
The ncmdsu bus type for Port. Enumeration: 'disabled': 1, 'busB': 3, 'busA': 2, 'busC': 4.
               ncmdsuPortChannel 1.3.6.1.4.1.321.1.3022.2001.1.4 displaystring read-write
This variable indicates the channel assignment for the ncmdsu for the port.
               ncmdsuPortConfiguration 1.3.6.1.4.1.321.1.3022.2001.1.5 integer read-write
This variable indicates the configuration bits for port. The configuration can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the ncmdsu port configuration to zero 0 1 64k set uses 8bits of data/64kbps. 1 2 LEN set enable loop code and loop commands 2 4 INV set invert the channelized data 3 8 SCR set to scramble channelized data. 4 16 CLK1 DTE transmit clock select bits 5 32 CLK2 DTE transmit clock select bits 6 64 TU set port as a timing unit 7 128 ALM set if DIU has to report alarms to SAM.
               ncmcsushelf 1.3.6.1.4.1.321.1.3022.2001.1.6 integer read-write
This variable indicates the csu shelf associated with the ncmdsu port.
               ncmcsuslot 1.3.6.1.4.1.321.1.3022.2001.1.7 integer read-write
This variable indicates the csu slot associated with the ncmdsu port.
               ncmdsuAlarmEnable 1.3.6.1.4.1.321.1.3022.2001.1.8 integer read-write
This variable indicates whether the alarm is enabled or disabled for ncmdsu. Enumeration: 'yES': 2, 'nO': 1.
               ncmdsuLosLead 1.3.6.1.4.1.321.1.3022.2001.1.9 integer read-write
This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the ncmdsu port configuration to zero 0 1 DTR set uses DTR 1 2 RTS set uses RTS 2 4 DSR set uses DSR 3 8 CTS set uses CTS 4 16 DCD set uses DCD 5 32 LOS use both bits: bits set to use for alarm 6 64 LOS 0 = Disable LOS detect, 1=use RTS , 2 = DTR 7 128 DDSMode set for 56k DDS .
               ncmdsuTimingSource 1.3.6.1.4.1.321.1.3022.2001.1.10 integer read-write
This variable indicates the T1 timing source for ncmdsu. Enumeration: 'cSU': 4, 'none': 1, 'port2': 3, 'port1': 2.
               ncmdsuDTESpeed 1.3.6.1.4.1.321.1.3022.2001.1.11 integer read-write
This variable indicates DTE Speed control and speeds 38.4k or below holds good for the DIU2131 card type. Enumeration: 'none': 1, 'mode-2-4': 8, 'mode-4-8': 7, 'mode-9-6': 6, 'mode-38-4': 4, 'mode-56k': 3, 'mode-64k': 2, 'mode-19-2': 5.
 ncmdsustatTable 1.3.6.1.4.1.321.1.3022.2003 no-access
The ncm dsu stat table.
           ncmdsustatEntry 1.3.6.1.4.1.321.1.3022.2003.1 no-access
An entry in the ncm dsu stat table.
               ncmdsuNIDstatIndex 1.3.6.1.4.1.321.1.3022.2003.1.1 integer read-only
This object specifies the node id of the node.
               ncmdsustatIndex 1.3.6.1.4.1.321.1.3022.2003.1.2 integer read-only
               ncmdsuPortLowbattery 1.3.6.1.4.1.321.1.3022.2003.1.3 integer read-only
The ncmdsu Lowbattery status for Port. Enumeration: 'not-low-battery': 1, 'low-battery': 2.
               ncmdsuPortLOSstatus 1.3.6.1.4.1.321.1.3022.2003.1.4 integer read-only
The ncmdsu LOS status for Port. Enumeration: 'not-Los-status': 1, 'los-status': 2.
               ncmdsuPortblockerrorcounter 1.3.6.1.4.1.321.1.3022.2003.1.5 gauge read-only
The number of block errors produced on port.
               ncmdsuPortTestSeconds 1.3.6.1.4.1.321.1.3022.2003.1.6 gauge read-only
The number of errors produced by a test on port.
               ncmdsuPortrateper8000 1.3.6.1.4.1.321.1.3022.2003.1.7 integer read-only
The rate/8000 on port.
               ncmdsuPortLeadStatus1 1.3.6.1.4.1.321.1.3022.2003.1.8 integer read-only
This variable indicates the Lead Status (part 1) of the port. The various bit positions are: Bit Value Name 0 1 DTR (1 = on; 0 = off) 1 2 RTS 2 4 DSR 3 8 CTS 4 16 DCD 5 32 TXD 6 64 RXD 7 128 Lead status available bit.
               ncmdsuPortLeadStatus2 1.3.6.1.4.1.321.1.3022.2003.1.9 integer read-only
This variable indicates the Lead Status (part 2) of the port.The lead status2 is bit mapped. The various bit positions are: BIT Value Name 0 0 no-loop 0 1 local-loop 1 2 remote-loop 2 4 test-mode.
               ncmdbuPrimaryLineStatus 1.3.6.1.4.1.321.1.3022.2003.1.10 integer read-only
This variable indicates the Primary Line Status of the ncmdbu. Enumeration: 'lOF': 3, 'yEL': 6, 'cD': 4, 'aSC': 2, 'lOS': 9, 'uSER': 5, 'bER': 7, 'oK': 1, 'aLLONE': 8.
               ncmdbuLineStatus 1.3.6.1.4.1.321.1.3022.2003.1.11 integer read-only
This variable indicates the ncmdbu Line Status of the ncmdbu. Enumeration: 'sTANDBY': 1, 'aCTIVE': 2, 'eRROR': 3.
               ncmdbuSwitchBy 1.3.6.1.4.1.321.1.3022.2003.1.12 integer read-only
This variable indicates the cause of the ncmdbu switching. Enumeration: 'nONE': 1, 'lOF': 3, 'yEL': 6, 'cD': 4, 'aSC': 2, 'lOS': 9, 'uSER': 5, 'bER': 7, 'aLLONE': 8.
               ncmdbuReceivedCode 1.3.6.1.4.1.321.1.3022.2003.1.13 integer read-only
This variable indicates the ncmdbu received code in hex.
               ncmdsuPortTestResults 1.3.6.1.4.1.321.1.3022.2003.1.14 integer read-only
The number of errors produced by a test on port .
               ncmdsuPortDiagStatus 1.3.6.1.4.1.321.1.3022.2003.1.15 integer read-only
This variable indicates the Diagnostic Status of the port. The various bit positions are: Bit Value Name 0 1 Reserved 1 2 Reserved 2 4 Reserved 3 8 Sending Test Code 4 16 Sending loopdown code 5 32 Sending loopup code 6 64 far end looped 7 128 Near end looped.
 ncmdbuMainConfigTable 1.3.6.1.4.1.321.1.3023.4000 no-access
The ncm dbu Main Configuration table.
           ncmdbuMainConfigEntry 1.3.6.1.4.1.321.1.3023.4000.1 no-access
An entry in the ncm dbu Main Configuration table.
               ncmdbuNIDMainConfigIndex 1.3.6.1.4.1.321.1.3023.4000.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmdbuMainLineIndex 1.3.6.1.4.1.321.1.3023.4000.1.2 integer read-only
               ncmdbudsubus 1.3.6.1.4.1.321.1.3023.4000.1.3 integer read-write
The ncmdsu bus type for Port. Enumeration: 'disabled': 1, 'busB': 3, 'busA': 2, 'busC': 4.
               ncmdbuPortChannel 1.3.6.1.4.1.321.1.3023.4000.1.4 displaystring read-write
This variable indicates the channel assignment for the ncmdbu for the port.
               ncmdbuPortConfiguration 1.3.6.1.4.1.321.1.3023.4000.1.5 integer read-write
This variable indicates the configuration bits for port. The configuration can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the ncmdsu port configuration to zero 0 1 64k set uses 8bits of data/64kbps. 1 2 LEN set enable loop code and loop commands 2 4 INV set invert the channelized data 3 8 SCR set to scramble channelized data. 4 16 CLK1 DTE transmit clock select bits 5 32 CLK2 DTE transmit clock select bits 6 64 TU set port as a timing unit 7 128 ALM set if DIU has to report alarms to SAM.
               ncmdbucsushelf 1.3.6.1.4.1.321.1.3023.4000.1.6 integer read-write
This variable indicates the csu shelf associated with the ncmdbu port.
               ncmdbucsuslot 1.3.6.1.4.1.321.1.3023.4000.1.7 integer read-write
This variable indicates the csu slot associated with the ncmdbu port.
               ncmdbuLosLead 1.3.6.1.4.1.321.1.3023.4000.1.8 integer read-write
This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the ncmdsu port configuration to zero 0 1 DTR set uses DTR 1 2 RTS set uses RTS 2 4 DSR set uses DSR 3 8 CTS set uses CTS 4 16 DCD set uses DCD 5 32 LOS use both bits: bits set to use for alarm 6 64 LOS 0 = Disable LOS detect, 1=use RTS , 2 = DTR 7 128 DDSMode set for 56k DDS .
 ncmdbuConfigTable 1.3.6.1.4.1.321.1.3023.4001 no-access
The ncm dbu Configuration table.
           ncmdbuConfigEntry 1.3.6.1.4.1.321.1.3023.4001.1 no-access
An entry in the ncmdbu Configuration table.
               ncmdbuNIDConfigIndex 1.3.6.1.4.1.321.1.3023.4001.1.1 integer read-only
This variable specifies the node id.
               ncmdbuLineIndex 1.3.6.1.4.1.321.1.3023.4001.1.2 integer read-only
               ncmdbuAllOnesSwitchOverTime 1.3.6.1.4.1.321.1.3023.4001.1.3 integer read-write
This variable indicates the all ones duration in seconds for the ncmdbu.
               ncmdbuSwitchOnBERThresholdExceeded 1.3.6.1.4.1.321.1.3023.4001.1.4 integer read-write
This variable indicates whether the ncmdbu is switched on for BER Threshold exceeded. Enumeration: 'yES': 2, 'nO': 1.
               ncmdbuDialBackupMode 1.3.6.1.4.1.321.1.3023.4001.1.5 integer read-write
This variable indicates the dial backup mode for the ncmdbu. Enumeration: 'manual-manual': 1, 'automatic-automatic': 2, 'automatic-manual': 3.
               ncmdbuBackupConnection 1.3.6.1.4.1.321.1.3023.4001.1.6 integer read-write
This variable indicates the whether the backup connection is activated or not. Enumeration: 'deactivate': 2, 'none': 1, 'activate': 3.
               ncmdbumode 1.3.6.1.4.1.321.1.3023.4001.1.7 integer read-write
This variable specifies the mode of ncmdbu. Enumeration: 'mode-56kncmdds': 3, 'mode-56k': 1, 'mode-64k': 2.
               ncmdbuLoopType 1.3.6.1.4.1.321.1.3023.4001.1.8 integer read-write
This variable specifies the Loop Type on RL EIA . Enumeration: 'fT1': 1.
 ncmddsMainConfigTable 1.3.6.1.4.1.321.1.3024.5000 no-access
The ncmdds Main Configuration table.
           ncmddsMainConfigEntry 1.3.6.1.4.1.321.1.3024.5000.1 no-access
An entry in the ncmdds Main Configuration table.
               ncmddsNIDMainConfigIndex 1.3.6.1.4.1.321.1.3024.5000.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmddsMainLineIndex 1.3.6.1.4.1.321.1.3024.5000.1.2 integer read-only
               ncmddsdsubus 1.3.6.1.4.1.321.1.3024.5000.1.3 integer read-write
The ncmdsu bus type for Port. Enumeration: 'disabled': 1, 'busB': 3, 'busA': 2, 'busC': 4.
               ncmddsPortChannel 1.3.6.1.4.1.321.1.3024.5000.1.4 displaystring read-write
This variable indicates the channel assignment for the ncmdsu for the port.
               ncmddsPortConfiguration 1.3.6.1.4.1.321.1.3024.5000.1.5 integer read-write
This variable indicates the configuration bits for port. The configuration can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the ncmdsu port configuration to zero 0 1 64k set uses 8bits of data/64kbps. 1 2 LEN set enable loop code and loop commands 2 4 INV set invert the channelized data 3 8 SCR set to scramble channelized data. 4 16 CLK1 DTE transmit clock select bits 5 32 CLK2 DTE transmit clock select bits 6 64 TU set port as a timing unit 7 128 ALM set if DIU has to report alarms to SAM.
               ncmddscsushelf 1.3.6.1.4.1.321.1.3024.5000.1.6 integer read-write
This variable indicates the csu shelf associated with the ncmdsu port.
               ncmddscsuslot 1.3.6.1.4.1.321.1.3024.5000.1.7 integer read-write
This variable indicates the csu slot associated with the ncmdsu port.
               ncmddsLosLead 1.3.6.1.4.1.321.1.3024.5000.1.8 integer read-write
This variable indicates the DTE lead bits for port. The DTE leads can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Name Description 0 set the ncmdsu port configuration to zero 0 1 DTR set uses DTR 1 2 RTS set uses RTS 2 4 DSR set uses DSR 3 8 CTS set uses CTS 4 16 DCD set uses DCD 5 32 LOS use both bits: bits set to use for alarm 6 64 LOS 0 = Disable LOS detect, 1=use RTS , 2 = DTR 7 128 DDSMode set for 56k DDS .
 ncmddsConfigTable 1.3.6.1.4.1.321.1.3024.5001 no-access
The ncmdds Configuration table.
           ncmddsConfigEntry 1.3.6.1.4.1.321.1.3024.5001.1 no-access
An entry in the ncmdds Configuration table.
               ncmddsNIDConfigIndex 1.3.6.1.4.1.321.1.3024.5001.1.1 integer read-only
This variable specifies the node id.
               ncmddsConfigLineIndex 1.3.6.1.4.1.321.1.3024.5001.1.2 integer read-only
This variable specifies the Line index.
               ncmddsPortLoopEnable 1.3.6.1.4.1.321.1.3024.5001.1.3 integer read-write
This variable indicates the loop enable bits for port. The loop enable can be set by setting the relevant bit to 1 and reset by setting the relevant bit to zero. Bit Value Description 0 no-loop 0 1 enable ncmdds loop 1 2 enable v54 loop 2 4 enable ft1 loop 3 8 enable verilink loop 4 16 5 32 6 64 7 128 . Enumeration: 'enable': 2, 'disable': 1.
               ncmddsPortReceiveLoopCode 1.3.6.1.4.1.321.1.3024.5001.1.4 integer read-write
This variable indicates the Receive ncmdds loop code of the port 1. Enumeration: 'dSU': 1, 'channel': 2.
               ncmddsPortRemoteLoopCode 1.3.6.1.4.1.321.1.3024.5001.1.5 integer read-write
This variable indicates the Receive ncmdds loop code of the port. Enumeration: 'fTI': 2, 'v54': 1, 'verilink': 3.
               ncmddsPortAlarmEnable 1.3.6.1.4.1.321.1.3024.5001.1.6 integer read-write
This variable indicates the Alarm enable which is bit mapped of the port. BIT Value Description 0 0 no-loop 0 1 alarm-on-loop 1 2 alarm-on-test 3 both Enumeration: 'enable': 2, 'disable': 1.
               ncmddsPortAlarmClearDelayTime 1.3.6.1.4.1.321.1.3024.5001.1.7 integer read-write
This variable indicates the Alarmcleardelaytime of the port.
               ncmddsPortAbnormalStationCodeThreshold 1.3.6.1.4.1.321.1.3024.5001.1.8 integer read-write
This variable indicates the AbnormalStationCodethreshold of the port.
               ncmddsPortControlModeIdleThreshold 1.3.6.1.4.1.321.1.3024.5001.1.9 integer read-write
This variable indicates the ControlModeIdlethreshold of the port.
               ncmddsPortMuxOutofSyncThreshold 1.3.6.1.4.1.321.1.3024.5001.1.10 integer read-write
This variable indicates the MuxoutofSyncthreshold of the port.
               ncmddsPortUnAssignedMuxChannelThreshold 1.3.6.1.4.1.321.1.3024.5001.1.11 integer read-write
This variable indicates the UnassignedMuxChannelthreshold of the port.
               ncmddsPortGroup1Codes 1.3.6.1.4.1.321.1.3024.5001.1.12 integer read-write
This variable indicates the port1Group1ncmddsCodes of the port.
               ncmddsPort56KStatus 1.3.6.1.4.1.321.1.3024.5001.1.13 integer read-only
This variable indicates the 56K ncmdds Status of the port. The various bit positions are: 0 Abnormal Station code(1 = Yes, 0 = No) 1 Control Mode Idle 2 Mux-Out-of-Sync 3 Unassigned Mux Chan 4 Group 1 ncmdds Codes Test Test 5 Test in Progress { 0 } Verilink {0} 511 6 Test in Progress { 0 } {1} 7 ncmdds mode enabled
               ncmddsPortReceived56KCode 1.3.6.1.4.1.321.1.3024.5001.1.14 integer read-only
This variable specifies the received 56K ncmdds code.Some specitic values indicate the specific testing error. Value Testing Error 1 UMC 2 TIP 3 TA 4 MA 5 RC 6 BL 7 LBE 8 FEV 9 ASC 10 OOS 11 CMI 12 TC Enumeration: 'asc': 9, 'ma': 4, 'oos': 10, 'cmi': 11, 'bl': 6, 'tip': 2, 'fev': 8, 'lbe': 7, 'umc': 1, 'rc': 5, 'tc': 12, 'ta': 3.
               ncmddsmode 1.3.6.1.4.1.321.1.3024.5001.1.15 integer read-write
This variable specifies the mode of ncmdds. Enumeration: 'mode-56kncmdds': 3, 'mode-56k': 1, 'mode-64k': 2.
               ncmddsLatchingLoopbackType 1.3.6.1.4.1.321.1.3024.5001.1.16 integer read-write
This variable specifies the latching loop up type of dds. Enumeration: 'none': 5, 'chan-loop-up': 1, 'dsu-loop-up': 2, 'chan-loop-dn': 4, 'ocu-loop-up': 3.
               ncmddsLatchingLoopbackDevNo 1.3.6.1.4.1.321.1.3024.5001.1.17 integer read-write
This variable specifies the device number to receive code. Range is 0 to 7, where 0 is the first device. Used only for DS0-Data Port loopback option of Latching Loopback Type Object. No signifiance right now.