VDSL-LINE-EXT-SCM-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: VDSL-LINE-EXT-SCM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SNMPv2-TC, VDSL-LINE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 vdslExtSCMMIB 1.3.6.1.2.1.10.228
The VDSL-LINE-MIB found in RFC 3728 defines objects for the management of a pair of VDSL transceivers at each end of the VDSL line. The VDSL-LINE-MIB configures and monitors the line code independent parameters (TC layer) of the VDSL line. This MIB module is an optional extension of the VDSL-LINE-MIB and defines objects for configuration and monitoring of the line code specific (LCS) elements (PMD layer) for VDSL lines using SCM coding. The objects in this extension MIB MUST NOT be used for VDSL lines using Multiple Carrier Modulation (MCM) line coding. If an object in this extension MIB is referenced by a line which does not use SCM, it has no effect on the operation of that line. Naming Conventions: Vtuc -- VDSL transceiver at near (Central) end of line Vtur -- VDSL transceiver at Remote end of line Vtu -- One of either Vtuc or Vtur Curr -- Current Atn -- Attenuation LCS -- Line Code Specific Max -- Maximum Mgn -- Margin PSD -- Power Spectral Density Rx -- Receive Snr -- Signal to Noise Ratio Tx -- Transmit Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4069: see the RFC itself for full legal notices.
         vdslLineExtSCMMib 1.3.6.1.2.1.10.228.1
             vdslLineExtSCMMibObjects 1.3.6.1.2.1.10.228.1.1
                 vdslLineSCMConfProfileBandTable 1.3.6.1.2.1.10.228.1.1.1 no-access
This table contains transmit band descriptor configuration information for a VDSL line. Each entry in this table reflects the configuration for one of possibly many bands of a single carrier modulation (SCM) VDSL line. For each profile which is associated with a VDSL line using SCM line coding, five entries in this table will exist, one for each of the five bands. Bands which are not in use will be marked as unused. These entries are defined by a manager and can be used to configure the VDSL line. If an entry in this table is referenced by a line which does not use SCM, it has no effect on the operation of that line.
                     vdslLineSCMConfProfileBandEntry 1.3.6.1.2.1.10.228.1.1.1.1 no-access
Each entry consists of a list of parameters that represents the configuration of a single carrier modulation VDSL modem transmit band. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. All read-create objects defined in this MIB module SHOULD be stored persistently.
                         vdslLineSCMConfProfileBandId 1.3.6.1.2.1.10.228.1.1.1.1.1 vdslscmbandid no-access
The BandId for this entry, which specifies which band is being referred to.
                         vdslLineSCMConfProfileBandInUse 1.3.6.1.2.1.10.228.1.1.1.1.2 truthvalue read-only
Indicates whether this band is in use. If set to True this band is in use.
                         vdslLineSCMConfProfileBandCenterFrequency 1.3.6.1.2.1.10.228.1.1.1.1.3 unsigned32 read-only
Specifies the center frequency in Hz
                         vdslLineSCMConfProfileBandSymbolRate 1.3.6.1.2.1.10.228.1.1.1.1.4 unsigned32 read-only
The requested symbol rate in baud.
                         vdslLineSCMConfProfileBandConstellationSize 1.3.6.1.2.1.10.228.1.1.1.1.5 unsigned32 read-only
Specifies the constellation size.
                         vdslLineSCMConfProfileBandTransmitPSDLevel 1.3.6.1.2.1.10.228.1.1.1.1.6 unsigned32 read-only
The requested transmit power spectral density for the VDSL modem. The Actual value in -0.25 dBm/Hz.
                         vdslLineSCMConfProfileBandRowStatus 1.3.6.1.2.1.10.228.1.1.1.1.7 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. None of the columns in this row may be modified while the row is in the `active' state. Before a profile can be deleted or taken out of service, (by setting this object to `destroy' or `notInService') it must be first unreferenced from all associated lines.
                 vdslLineSCMPhysBandTable 1.3.6.1.2.1.10.228.1.1.2 no-access
This table provides one row for each SCM Vtu band. This table is read only as it reflects the current physical parameters of each band. For each ifIndex which is associated with a VDSL line using SCM line coding, five entries in this table will exist, one for each of the five bands. Bands which are not in use will be marked as unused.
                     vdslLineSCMPhysBandEntry 1.3.6.1.2.1.10.228.1.1.2.1 no-access
An entry in the vdslLineSCMPhysBandTable.
                         vdslLineSCMPhysBandId 1.3.6.1.2.1.10.228.1.1.2.1.1 vdslscmbandid no-access
The BandId for this entry, which specifies which band is being referred to.
                         vdslLineSCMPhysBandInUse 1.3.6.1.2.1.10.228.1.1.2.1.2 truthvalue read-only
Indicates whether this band is in use. If set to True this band is in use.
                         vdslLineSCMPhysBandCurrCenterFrequency 1.3.6.1.2.1.10.228.1.1.2.1.3 unsigned32 read-only
The current center frequency in Hz for this band.
                         vdslLineSCMPhysBandCurrSymbolRate 1.3.6.1.2.1.10.228.1.1.2.1.4 unsigned32 read-only
The current value of the symbol rate in baud for this band.
                         vdslLineSCMPhysBandCurrConstellationSize 1.3.6.1.2.1.10.228.1.1.2.1.5 unsigned32 read-only
The current constellation size on this band.
                         vdslLineSCMPhysBandCurrPSDLevel 1.3.6.1.2.1.10.228.1.1.2.1.6 unsigned32 read-only
The transmit power spectral density for the VDSL modem.
                         vdslLineSCMPhysBandCurrSnrMgn 1.3.6.1.2.1.10.228.1.1.2.1.7 integer32 read-only
Noise margin as seen by this Vtu and band with respect to its received signal in 0.25 dB.
                         vdslLineSCMPhysBandCurrAtn 1.3.6.1.2.1.10.228.1.1.2.1.8 unsigned32 read-only
Measured difference in the total power transmitted by the peer Vtu on this band and the total power received by this Vtu on this band in 0.25 dB.
             vdslLineExtSCMConformance 1.3.6.1.2.1.10.228.1.2
                 vdslLineExtSCMGroups 1.3.6.1.2.1.10.228.1.2.1
                     vdslLineExtSCMGroup 1.3.6.1.2.1.10.228.1.2.1.1
A collection of objects providing configuration information for a VDSL line based upon single carrier modulation modem.
                 vdslLineExtSCMCompliances 1.3.6.1.2.1.10.228.1.2.2
                     vdslLineExtSCMMibCompliance 1.3.6.1.2.1.10.228.1.2.2.1
The compliance statement for SNMP entities which manage VDSL interfaces.