VDSL-DMT-LINE-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: VDSL-DMT-LINE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ADSL-LINE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 vdslDMTMib 1.3.6.1.2.1.10.94.4
This MIB module defines a collection of objects for managing VDSL DMT Lines. These objects extend the ADSL-LINE-MIB (RFC2662).
     vdslDMTMibObjects 1.3.6.1.2.1.10.94.4.1
         vdslDMTConfProfileTable 1.3.6.1.2.1.10.94.4.1.1 no-access
This table contains configuration parameters that apply to VDSL modems.
             vdslDMTConfProfileEntry 1.3.6.1.2.1.10.94.4.1.1.1 no-access
An entry for the vdslDMTConfProfileTable
                 vdslDmtConfProfileSSFTotal 1.3.6.1.2.1.10.94.4.1.1.1.1 vdsldmtconfprofilessf read-only
Total number of symbols per superframe. Note that currently the total must be set to 20. The sum of up-stream-symbols+down-stream-symbols+quiescent-symbols must be equal to total-symbols. Note that currently quiescent-symbols=2. Note that currently down-stream-symbols can be in the range 7..16
                 vdslDmtConfProfileSSFDownStream 1.3.6.1.2.1.10.94.4.1.1.1.2 vdsldmtconfprofilessf read-only
Number of down stream symbols per superframe. The sum of up-stream-symbols+down-stream-symbols+quiescent-symbols must be equal to total-symbols. Note that currently quiescent-symbols = 2. Note that currently down-stream-symbols can be in the range 7..16
                 vdslDmtConfProfileLowSpectrum 1.3.6.1.2.1.10.94.4.1.1.1.3 vdsldmtconfprofilespectrum read-only
The lower edge of the down stream and up stream transmit spectrum is controlled by this setting. This setting is the first bin on which to transmit/receive.
                 vdslDmtConfProfileHighSpectrum 1.3.6.1.2.1.10.94.4.1.1.1.4 vdsldmtconfprofilespectrum read-only
The highest edge of the down stream and up stream transmit spectrum is controlled by this setting. This setting is the last bin on which to transmit/receive
                 vdslDmtConfProfileRFIEnable 1.3.6.1.2.1.10.94.4.1.1.1.5 vdsldmtconfprofilerfienable read-only
Enable/disable the RFI canceller. Enabling the RFI canceller mitigates egress into the bands specified by RFIBands and prevents the modems from transmitting on subchannels within those bands.
                 vdslDmtConfProfileRFIBand1Low 1.3.6.1.2.1.10.94.4.1.1.1.6 vdsldmtconfprofilerfiband read-only
This setting specifies the start frequency of RFI band 1.
                 vdslDmtConfProfileRFIBand1High 1.3.6.1.2.1.10.94.4.1.1.1.7 vdsldmtconfprofilerfiband read-only
This setting specifies the stop frequency of RFI band 1.
                 vdslDmtConfProfileRFIBand2Low 1.3.6.1.2.1.10.94.4.1.1.1.8 vdsldmtconfprofilerfiband read-only
This setting specifies the start frequency of RFI band 2.
                 vdslDmtConfProfileRFIBand2High 1.3.6.1.2.1.10.94.4.1.1.1.9 vdsldmtconfprofilerfiband read-only
This setting specifies the stop frequency of RFI band 2.
                 vdslDmtConfProfileRFIBand3Low 1.3.6.1.2.1.10.94.4.1.1.1.10 vdsldmtconfprofilerfiband read-only
This setting specifies the start frequency of RFI band 3.
                 vdslDmtConfProfileRFIBand3High 1.3.6.1.2.1.10.94.4.1.1.1.11 vdsldmtconfprofilerfiband read-only
This setting specifies the stop frequency of RFI band 3.
                 vdslDmtConfProfileRFIBand4Low 1.3.6.1.2.1.10.94.4.1.1.1.12 vdsldmtconfprofilerfiband read-only
This setting specifies the start frequency of RFI band 4.
                 vdslDmtConfProfileRFIBand4High 1.3.6.1.2.1.10.94.4.1.1.1.13 vdsldmtconfprofilerfiband read-only
This setting specifies the stop frequency of RFI band 4.
                 vdslDmtConfProfilePowerCutback 1.3.6.1.2.1.10.94.4.1.1.1.14 vdsldmtconfprofilepowercutback read-only
This array is used to set the desired receive Power Spectral Density (PSD) at a value below the maximum transmit PSD.
                 vdslDmtConfProfilePowerBoost 1.3.6.1.2.1.10.94.4.1.1.1.15 vdsldmtconfprofilepowerboost read-only
This variable is used to specify a boost value for the transmit Power Spectral Density (PSD).
                 vdslDmtConfProfileEnergyRedist 1.3.6.1.2.1.10.94.4.1.1.1.16 vdsldmtconfprofileenergyredist read-only
This variable enables/disable energy redistribution. Use of energy redistribution allows energy that would have been allocated to subchannels that are not used to be redistributed to subchannels supporting data transmission.
     vdslConformance 1.3.6.1.2.1.10.94.4.2
         vdslGroups 1.3.6.1.2.1.10.94.4.2.1
             vdslDMTConfProfileGroup 1.3.6.1.2.1.10.94.4.2.1.1
This group supports objects for configuring VDSL DMT lines.
         vdslCompliances 1.3.6.1.2.1.10.94.4.2.2
             vdslLineMibCompliance 1.3.6.1.2.1.10.94.4.2.2.1
The section outlines compliance requirements for this MIB.