Unisphere-Data-PPPOE-PROFILE-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER

Home	MIB: Unisphere-Data-PPPOE-PROFILE-MIB
Download as:		SNMPv2-CONF, Unisphere-Data-MIBs, SNMPv2-SMI, Unisphere-Data-TC, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
usdPppoeProfileMIB	1.3.6.1.4.1.4874.2.2.46			The point-to-point protocol over Ethernet (PPPoE) profile MIB for the Juniper enterprise.
usdPppoeProfileObjects	1.3.6.1.4.1.4874.2.2.46.1
usdPppoeProfile	1.3.6.1.4.1.4874.2.2.46.1.1
usdPppoeProfileTable	1.3.6.1.4.1.4874.2.2.46.1.1.1		no-access	This table contains profiles for configuring PPPoE interfaces/sessions. Entries in this table are created/deleted as a side-effect of corresponding operations to the usdProfileNameTable in the Unisphere-Data-PROFILE-MIB.
usdPppoeProfileEntry	1.3.6.1.4.1.4874.2.2.46.1.1.1.1		no-access	A profile describing configuration of a PPPoE interface and its subinterfaces (sessions).
usdPppoeProfileId	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.1	unsigned32	no-access	The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the usdProfileNameTable.
usdPppoeProfileSetMap	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2	usdsetmap	read-write	A bitmap representing which objects in this entry have been explicitly configured. See the definition of the UsdSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure UsdSetMap, bits in UsdSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures UsdSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring UsdSetMap.
usdPppoeProfileMaxNumSessions	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.3	integer32	read-write	The maximum number of PPPoE sessions (subinterfaces) that can be configured on the main PPPoE interface created using this profile. A value of zero indicates no bound is configured.
usdPppoeProfileSubMotm	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.4	displaystring	read-write	A message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub- interface. A client may choose to display this message to the user.
usdPppoeProfileSubUrl	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5	displaystring	read-write	A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can have several substitutions applied: %D is replaced with the profile name %d is replaced with the domain name %u is replaced with the user name %U is replaced with the user/domain name together %% is replaced with the % character The resulting string must not be greater than 127 octets long. The client may use this URL as the initial web-page for the user.
usdPppoeProfileDupProtect	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.6	usdenable	read-write	Flag to control whether duplicate MAC addresses are allowed
usdPppoeProfileAcName	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.7	displaystring	read-write	The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.
usdPppoeProfilePadiFlag	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.8	usdenable	read-write	The PPPoE major interface parameter PADI flag controls whether to always repsond to a PADI with a PADO regardless of the ability to create the session and allow the session establish phase to resolve it.
usdPppoeProfilePacketTrace	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.9	usdenable	read-write	The PPPoE major interface parameter packet tracing flag controls whether packet tracing is enable or not.
usdPppoeProfileConformance	1.3.6.1.4.1.4874.2.2.46.4
usdPppoeProfileCompliances	1.3.6.1.4.1.4874.2.2.46.4.1
usdPppoeProfileCompliance	1.3.6.1.4.1.4874.2.2.46.4.1.1			Obsolete compliance statement for entities which implement the Juniper PPPoE Profile MIB. This statement became obsolete when the duplicate MAC address indicator and AC-NAME tag were added.
usdPppoeCompliance2	1.3.6.1.4.1.4874.2.2.46.4.1.2			Obsolete compliance statement for entities which implement the Juniper PPPoE profile MIB. This statement became obsolete when PADI flag, AC-name and packet trace objects were added.
usdPppoeCompliance3	1.3.6.1.4.1.4874.2.2.46.4.1.3			The compliance statement for entities which implement the Juniper PPPoE Profile MIB.
usdPppoeProfileGroups	1.3.6.1.4.1.4874.2.2.46.4.2
usdPppoeProfileGroup	1.3.6.1.4.1.4874.2.2.46.4.2.1			Obsolete collection of objects providing management of profile functionality for PPPoE interfaces in a Juniper product. This group became obsolete when the duplicate MAC address indicator and AC-NAME tag objects were added.
usdPppoeProfileGroup2	1.3.6.1.4.1.4874.2.2.46.4.2.2			Obsolete collection of objects providing management of profile functionality for PPPOE interfaces in a Unisphere product. This group became obsolete when PADI flag, AC-name and packet trace objects were added.
usdPppoeProfileGroup3	1.3.6.1.4.1.4874.2.2.46.4.2.3			A collection of objects providing management of profile functionality for PPPOE interfaces in a Unisphere product.