Unisphere-Data-FRAME-RELAY-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Unisphere-Data-FRAME-RELAY-MIB
Download as:   
SNMPv2-CONF, Unisphere-Data-MIBs, IF-MIB, FRAME-RELAY-DTE-MIB, SNMPv2-SMI, Unisphere-Data-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usdFrameRelayMIB 1.3.6.1.4.1.4874.2.2.10
The Frame Relay MIB for the Unisphere Networks Inc. enterprise.
       usdFrObjects 1.3.6.1.4.1.4874.2.2.10.1
           usdFrIfLayer 1.3.6.1.4.1.4874.2.2.10.1.1
               usdFrNextIfIndex 1.3.6.1.4.1.4874.2.2.10.1.1.1 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdFrDlcmiTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
               usdFrDlcmiTable 1.3.6.1.4.1.4874.2.2.10.1.1.2 no-access
The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface. This table represents a superset of functionality specified in RFC2115 FRAME-RELAY-DTE-MIB. In particular, it adds attributes that permit the interface to operate as a network-side (DCE) interface.
                   usdFrDlcmiEntry 1.3.6.1.4.1.4874.2.2.10.1.1.2.1 no-access
The Parameters for a particular Data Link Connection Management Interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable, and usdFrDlcmiStatsTable. Creating/deleting user-side (DTE) entries in this table also causes coresponding entries to be created/deleted in RFC2115 frDlcmiTable. The organization and definitions of objects in this table are intentionally aligned closely to those in RFC2115.
                       usdFrDlcmiIfIndex 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.1 interfaceindex read-only
The ifIndex value of the corresponding ifEntry.
                       usdFrDlcmiState 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.2 integer read-only
This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface. Enumeration: 'itut933A': 5, 'ansiT1617D1994': 6, 'lmiRev1': 2, 'ansiT1617B': 4, 'ansiT1617D': 3, 'noLmiConfigured': 1.
                       usdFrDlcmiAddress 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.3 integer read-only
This variable states which address format is in use on the Frame Relay interface. Enumeration: 'q921': 1, 'q922': 4, 'q922March90': 2, 'q922November90': 3.
                       usdFrDlcmiAddressLen 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.4 integer read-only
This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion. Enumeration: 'threeOctets': 3, 'twoOctets': 2, 'fourOctets': 4.
                       usdFrDlcmiPollingInterval 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.5 integer32 read-only
This is the number of seconds between successive status enquiry messages sent by the DTE. Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI.
                       usdFrDlcmiFullEnquiryInterval 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.6 integer32 read-only
Number of status enquiry intervals that pass before issuance of a full status enquiry message. Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI.
                       usdFrDlcmiErrorThreshold 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.7 integer32 read-only
The minimum number of errors that must be observed within the number of events specified by usdFrDlcmiMonitoredEvents, to declare the interface down. 'error' is lack of receipt of a Status, in response to an issued Status Enquiry, within the Polling Interval (T391). Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI.
                       usdFrDlcmiMonitoredEvents 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.8 integer32 read-only
The number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down. 'status polling interval' is specified by usdFrDlcmiPollingInterval. Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI.
                       usdFrDlcmiMaxSupportedVCs 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.9 dlci read-only
The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond badValue.
                       usdFrDlcmiMulticast 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.10 integer read-only
This indicates whether the Frame Relay interface is using a multicast service. Enumeration: 'broadcast': 2, 'nonBroadcast': 1.
                       usdFrDlcmiStatus 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.11 integer read-only
This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will stay in the running state indefinitely. Enumeration: 'fault': 2, 'running': 1, 'initializing': 3.
                       usdFrDlcmiRowStatus 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.12 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdFrDlcmiRowStatus usdFrDlcmiState usdFrDlcmiMaxSupportedVCs usdFrDlcmiLowerIfIndex usdFrDlcmiRole In addition, when creating an entry the following conditions must hold: A value for usdFrDlcmiIndex must have been determined previously, by reading usdFrNextIfIndex. The interface identified by usdFrDlcmiLowerIfIndex must exist, and must be an interface type that permits layering of Frame Relay above it. A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table. If usdFrDlcmiRole is dte(0), a corresponding entry is created/deleted in frDlcmiTable.
                       usdFrDlcmiLowerIfIndex 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.13 interfaceindexorzero read-only
The ifIndex of an interface over which this Frame Relay interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                       usdFrDlcmiRole 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.14 integer read-only
Specifies the role this interface assumes with respect to the remote end. When acting as a DTE, the following objects are not relevant: usdFrDlcmiDcePollingInterval usdFrDlcmiDceErrorThreshold usdFrDlcmiDceMonitoredEvents When acting as a DCE, the following objects are not relevant: usdFrDlcmiPollingInterval usdFrDlcmiFullEnquiryInterval usdFrDlcmiErrorThreshold usdFrDlcmiMonitoredEvents Enumeration: 'dce': 1, 'nni': 2, 'dte': 0.
                       usdFrDlcmiDcePollingInterval 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.15 integer32 read-only
The number of seconds within which a DCE expects to receive a Status Enquiry from the DTE. This value corresponds to the T392 timer. Pertains to DCE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DCE or NNI.
                       usdFrDlcmiDceErrorThreshold 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.16 integer32 read-only
The minimum number of errors that must be observed within the number of events specified by usdFrDlcmiDceMonitoredEvents, to declare the interface down. 'error' is lack of receipt of a Status Enquiry within the interval specified by usdFrDlcmiDcePollingInterval (T392). Pertains to DCE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DCE or NNI.
                       usdFrDlcmiDceMonitoredEvents 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.17 integer32 read-only
The number of DCE polling intervals over which accumulated errors are counted against the threshold specified in usdFrDlcmiDceErrorThreshold. If, within this number of events, the number of errors equals or exceeds the threshold, the interface is declared down. The 'DCE polling interval' is specified by usdFrDlcmiDcePollingInterval. Pertains to DCE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DCE or NNI.
               usdFrDlcmiStatsTable 1.3.6.1.4.1.4874.2.2.10.1.1.3 no-access
The statistics for the Data Link Connection Management Interface for the frame relay service on this interface.
                   usdFrDlcmiStatsEntry 1.3.6.1.4.1.4874.2.2.10.1.1.3.1 no-access
The statistics for a particular Data Link Connection Management Interface. Statistics are not relevant while the usdFrDlcmiState has the value 'noLmiConfigured'. The DTE statistics are relevant when the corresponding usdFrDlcmiRole is DTE. The DTE statistics are relevant when the corresponding usdFrDlcmiRole is DCE.
                       usdFrDlcmiStatsDteEnquiries 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.1 counter32 read-only
Number of Status Enquiries sent (as DTE).
                       usdFrDlcmiStatsDteFullEnquiries 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.2 counter32 read-only
Number of Full Enquiries sent (as DTE).
                       usdFrDlcmiStatsDteEnquiryResponses 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.3 counter32 read-only
Number of Status Enquiry responses received (as DTE).
                       usdFrDlcmiStatsDteFullEnquiryResponses 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.4 counter32 read-only
Number of Full Enquiry responses received (as DTE).
                       usdFrDlcmiStatsDteAsyncUpdates 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.5 counter32 read-only
Number of Asynchronous Updates received (as DTE).
                       usdFrDlcmiStatsDteUnknownRxMessages 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.6 counter32 read-only
Number of unknown messages received (as DTE).
                       usdFrDlcmiStatsDteLossOfSequences 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.7 counter32 read-only
Number of times a discontinuity in sequence numbering of received messages was detected (as DTE).
                       usdFrDlcmiStatsDteNoResponseTimeouts 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.8 counter32 read-only
Number of timer expirations awaiting a Status message (as DTE).
                       usdFrDlcmiStatsDceEnquiries 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.9 counter32 read-only
Number of Status Enquiries received (as DCE.)
                       usdFrDlcmiStatsDceFullEnquiries 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.10 counter32 read-only
Number of Full Enquiries received (as DCE).
                       usdFrDlcmiStatsDceEnquiryResponses 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.11 counter32 read-only
Number of Status Enquiry responses sent (as DCE).
                       usdFrDlcmiStatsDceFullEnquiryResponses 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.12 counter32 read-only
Number of Full Enquiry responses sent (as DCE).
                       usdFrDlcmiStatsDceAsyncUpdates 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.13 counter32 read-only
Number of Asynchronous Updates sent (as DCE).
                       usdFrDlcmiStatsDceUnknownRxMessages 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.14 counter32 read-only
Number of unknown messages received (as DCE).
                       usdFrDlcmiStatsDceLossOfSequences 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.15 counter32 read-only
Number of times a discontinuity in sequence numbering of received messages was detected (as DCE).
                       usdFrDlcmiStatsDceNoResponseTimeouts 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.16 counter32 read-only
Number of timer expirations awaiting a Status Enquiry (as DCE).
                       usdFrDlcmiStatsDiscontinuityTime 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.17 timeticks read-only
Value of sysUpTime at the most recent event that caused a discontinuity in the monotonic operation of any of the counters in this entry. Such disruption might be caused by: Hardware insertion/removal. Reconfiguration of usdFrDlcmiState. Reconfiguration of usdFrDlcmiRole. Conclusions can be drawn from successive polls of an entry's counters only if the value of this object, simultaneously retrieved in those polls, remains unchanged.
               usdFrCircuitTable 1.3.6.1.4.1.4874.2.2.10.1.1.4 no-access
A table containing information about specific Data Link Connections (DLC) or virtual circuits. This table mirrors the structure of RFC2115 FRAME-RELAY-DTE-MIB frCircuitTable, for the purpose of enumerating circuits on both DTE and DCE Frame Relay interfaces.
                   usdFrCircuitEntry 1.3.6.1.4.1.4874.2.2.10.1.1.4.1 no-access
The information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in usdFrCircuitCreationTime.
                       usdFrCircuitIfIndex 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.1 interfaceindex no-access
The ifIndex Value of the ifEntry this virtual circuit is layered onto.
                       usdFrCircuitDlci 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.2 dlci no-access
The Data Link Connection Identifier for this virtual circuit.
                       usdFrCircuitState 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.3 integer read-only
Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by setting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. The use of 'invalid' is deprecated in this SNMP Version 2 MIB, in favor of usdFrCircuitRowStatus. Enumeration: 'active': 2, 'inactive': 3, 'invalid': 1.
                       usdFrCircuitReceivedFECNs 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.4 counter32 read-only
Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.
                       usdFrCircuitReceivedBECNs 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.5 counter32 read-only
Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested.
                       usdFrCircuitSentFrames 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.6 counter32 read-only
The number of frames sent from this virtual circuit since it was created.
                       usdFrCircuitSentOctets 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.7 counter32 read-only
The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.
                       usdFrCircuitReceivedFrames 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.8 counter32 read-only
Number of frames received over this virtual circuit since it was created.
                       usdFrCircuitReceivedOctets 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.9 counter32 read-only
Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.
                       usdFrCircuitCreationTime 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.10 timestamp read-only
The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.
                       usdFrCircuitLastTimeChange 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.11 timestamp read-only
The value of sysUpTime when last there was a change in the virtual circuit state
                       usdFrCircuitCommittedBurst 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.12 integer32 read-only
This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
                       usdFrCircuitExcessBurst 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.13 integer32 read-only
This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
                       usdFrCircuitThroughput 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.14 integer32 read-only
Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst rate and throughput are both non-zero, the measurement interval, T, is T=usdFrCircuitCommittedBurst/usdFrCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement interval, T, is T=usdFrCircuitExcessBurst/ifSpeed.
                       usdFrCircuitMulticast 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.15 integer read-only
This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to Enumeration: 'unicast': 1, 'nWay': 4, 'twoWay': 3, 'oneWay': 2.
                       usdFrCircuitType 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.16 integer read-only
Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface. Enumeration: 'dynamic': 2, 'static': 1.
                       usdFrCircuitDiscards 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.17 counter32 read-only
The number of inbound frames dropped because of format errors, or because the VC is inactive.
                       usdFrCircuitReceivedDEs 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.18 counter32 read-only
Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.
                       usdFrCircuitSentDEs 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.19 counter32 read-only
Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set.
                       usdFrCircuitLogicalIfIndex 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.20 interfaceindex read-only
Normally the same value as frDlcmiIfIndex, but different when an implementation associates a virtual ifEntry with a DLC or set of DLCs in order to associate higher layer objects such as the ipAddrEntry with a subset of the virtual circuits on a Frame Relay interface. The type of such ifEntries is defined by the higher layer object; for example, if PPP/Frame Relay is implemented, the ifType of this ifEntry would be PPP. If it is not so defined, as would be the case with an ipAddrEntry, it should be of type Other.
                       usdFrCircuitRowStatus 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.21 rowstatus read-only
This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.
                       usdFrCircuitSentFECNs 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.22 counter32 read-only
Number of frames sent to the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.
                       usdFrCircuitSentBECNs 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.23 counter32 read-only
Number of frames sent to the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested.
           usdFrSubIfLayer 1.3.6.1.4.1.4874.2.2.10.1.2
               usdFrSubIfNextIfIndex 1.3.6.1.4.1.4874.2.2.10.1.2.1 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdFrSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
               usdFrSubIfTable 1.3.6.1.4.1.4874.2.2.10.1.2.2 no-access
This table contains entries for Frame Relay Subinterfaces present in the system.
                   usdFrSubIfEntry 1.3.6.1.4.1.4874.2.2.10.1.2.2.1 no-access
Each entry describes the characteristics of a Frame Relay Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/usdIfTable.
                       usdFrSubIfIndex 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.1 interfaceindex no-access
The ifIndex of the Frame Relay Subinterface. When creating entries in this table, suitable values for this object are determined by reading usdFrSubNextIfIndex.
                       usdFrSubIfRowStatus 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.2 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdFrSubIfRowStatus usdFrSubIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdFrSubIfIndex must have been determined previously, by reading usdFrSubIfNextIfIndex. The interface identified by usdFrSubIfLowerIfIndex must exist, and must be a Frame Relay interface. A positive value configured for usdFrSubIfId must not already be assigned to another subinterface layered onto the same underlying Frame Relay interface. A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table.
                       usdFrSubIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.3 interfaceindexorzero read-only
The ifIndex of a Frame Relay interface over which this Frame Relay Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                       usdFrSubIfId 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.4 integer32 read-only
An integer identifier for the Frame Relay subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces configured on the same underlying Frame Relay interface. If this object is not configured, or is configured with a value of -1, a nonzero value will be allocated internally and can be retrieved from this object after table entry creation has succeeded. A value of zero for this object is reserved for future use.
               usdFrSubIfCktTable 1.3.6.1.4.1.4874.2.2.10.1.2.3 no-access
This table contains entries for Frame Relay circuits configured on Frame Relay Subinterfaces present in the system. An implementation may constrain the number of circuits permitted to be configured per Frame Relay Subinterface; in particular, an implementation may restrict each Frame Relay Subinterface to have a single circuit. Attributes in this entry can only be configured at entry creation, and remain fixed for the lifetime of the entry.
                   usdFrSubIfCktEntry 1.3.6.1.4.1.4874.2.2.10.1.2.3.1 no-access
Each entry describes the characteristics of a Frame Relay Subinterface circuit.
                       usdFrSubIfCktDlci 1.3.6.1.4.1.4874.2.2.10.1.2.3.1.1 dlci no-access
The DLCI of the Frame Relay circuit used by this subinterface.
                       usdFrSubIfCktRowStatus 1.3.6.1.4.1.4874.2.2.10.1.2.3.1.2 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdFrSubIfCktRowStatus
       usdFrConformance 1.3.6.1.4.1.4874.2.2.10.4
           usdFrCompliances 1.3.6.1.4.1.4874.2.2.10.4.1
               usdFrCompliance 1.3.6.1.4.1.4874.2.2.10.4.1.1
The compliance statement for entities that implement the Unisphere Frame Relay MIB.
           usdFrGroups 1.3.6.1.4.1.4874.2.2.10.4.2
               usdFrGroup 1.3.6.1.4.1.4874.2.2.10.4.2.1
A collection of objects providing management of Frame Relay interfaces in a Unisphere product.
               usdFrSubIfGroup 1.3.6.1.4.1.4874.2.2.10.4.2.2
A collection of objects providing management of Frame Relay subinterfaces in a Unisphere product.