Unisphere-Data-DS3-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Unisphere-Data-DS3-MIB
Download as:   
SNMPv2-CONF, Unisphere-Data-MIBs, IF-MIB, SNMPv2-SMI, Unisphere-Data-TC, PerfHist-TC-MIB, SNMPv2-TC, RFC1407-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usdDs3MIB 1.3.6.1.4.1.4874.2.2.4
The DS3 MIB for the Unisphere Networks Inc. enterprise.
     usdDs3Objects 1.3.6.1.4.1.4874.2.2.4.1
         usdDsx3ConfigTable 1.3.6.1.4.1.4874.2.2.4.1.1 no-access
This table contains entries for DS3/E3 interfaces present in the system.
             usdDsx3ConfigEntry 1.3.6.1.4.1.4874.2.2.4.1.1.1 no-access
Each entry describes the characteristics of an DS3/E3 interface.
                 usdDsx3LineLength 1.3.6.1.4.1.4874.2.2.4.1.1.1.1 integer32 read-only
The length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry.
                 usdDsx3LineType 1.3.6.1.4.1.4874.2.2.4.1.1.1.2 integer read-only
This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. Note that this object represents the actual line type when the corresponding value of dsx3LineType is dsx3other(1). The values, in sequence, describe: TITLE: SPECIFICATION: dsx3M23 ANSI T1.107-1988 dsx3SYNTRAN ANSI T1.107-1988 dsx3CbitParity ANSI T1.107a-1989 dsx3ClearChannel ANSI T1.102-1987 e3G832 ITU-T G.832 e3Framed ITU-T G.751 e3Plcp ETSI T/NA(91)18. dsx3M23Plcp ATM Forum af-phy-0054.000 dsx3CbitParityPlcp ATM Forum af-phy-0054.000 Enumeration: 'usdDsx3ClearChannel': 5, 'usdE3G832': 6, 'usdDsx3other': 1, 'usdDsx3SYNTRAN': 3, 'usdE3Plcp': 8, 'usdDsx3M23': 2, 'usdDsx3M23Plcp': 18, 'usdDsx3CbitParity': 4, 'usdDsx3CbitParityPlcp': 20, 'usdE3Framed': 7.
                 usdDsx3CellScramblerConfig 1.3.6.1.4.1.4874.2.2.4.1.1.1.3 integer read-only
This variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces which do not support ATM, this object returns the value notSupported(3). Enumeration: 'scramblerOff': 2, 'notSupported': 3, 'scramblerOn': 1.
                 usdDsx3Channelization 1.3.6.1.4.1.4874.2.2.4.1.1.1.4 truthvalue read-only
The channelization setting for this DS3 interface; true(1) indicates channelization, false(2) indicates no channelization.
                 usdDsx3InterfaceType 1.3.6.1.4.1.4874.2.2.4.1.1.1.5 integer read-only
The DS3 interface type setting. Enumeration: 'ds3E3': 1, 'ds3T3': 0.
                 usdDsx3Application 1.3.6.1.4.1.4874.2.2.4.1.1.1.6 integer read-only
The interface application setting. Enumeration: 'ds3FrameOverDs3': 0, 'ds3AtmOverDs3': 1.
                 usdDsx3Ds3Channel 1.3.6.1.4.1.4874.2.2.4.1.1.1.7 integer read-only
The DS3 channel setting. The range of channel settings depends on the line rate of the underlying interface.
                 usdDsx3LowerIfIndex 1.3.6.1.4.1.4874.2.2.4.1.1.1.8 interfaceindexorzero read-only
The ifIndex of the interface over which this DS3 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                 usdDsx3RowStatus 1.3.6.1.4.1.4874.2.2.4.1.1.1.9 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support setting the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdDsx3RowStatus usdDsx3LowerIfIndex In addition, when creating an entry the following conditions must hold: A value for ifIndex must have been determined previously, by reading usdDsx3NextIfIndex. The interface identified by usdDsx3LowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table.
                 usdDsx3Ds3DsuMode 1.3.6.1.4.1.4874.2.2.4.1.1.1.10 integer read-only
The DSU configuration setting for this entry. Enumeration: 'ds3DsuLarsCom': 2, 'ds3DsuModeNone': 0, 'ds3DsuDigitalLink': 4.
                 usdDsx3Ds3BandwidthLimit 1.3.6.1.4.1.4874.2.2.4.1.1.1.11 integer read-only
The DSU bandwidth configuration for this entry.
                 usdDsx3Ds3DsuScrambleMode 1.3.6.1.4.1.4874.2.2.4.1.1.1.12 integer read-only
The DSU scramble mode setting for this entry. Enumeration: 'ds3DsuScrambleEnable': 1, 'ds3DsuScrambleDisabled': 0.
                 usdDsx3MdlCarrier 1.3.6.1.4.1.4874.2.2.4.1.1.1.13 integer read-only
Specifies the interface is used in carrier environment. Enumeration: 'disabled': 0, 'enabled': 1.
                 usdDsx3MdlTransmit 1.3.6.1.4.1.4874.2.2.4.1.1.1.14 integer read-only
Specifies transmission enabling. Enumeration: 'path': 1, 'testsignal': 4, 'idlesignal': 2, 'none': 8.
                 usdDsx3MdlEic 1.3.6.1.4.1.4874.2.2.4.1.1.1.15 displaystring read-only
This is the equipment identification code.
                 usdDsx3MdlLic 1.3.6.1.4.1.4874.2.2.4.1.1.1.16 displaystring read-only
This is the location identification code.
                 usdDsx3MdlFic 1.3.6.1.4.1.4874.2.2.4.1.1.1.17 displaystring read-only
This is the frame identification code.
                 usdDsx3MdlUnit 1.3.6.1.4.1.4874.2.2.4.1.1.1.18 displaystring read-only
This is the unit identification code.
                 usdDsx3MdlPfi 1.3.6.1.4.1.4874.2.2.4.1.1.1.19 displaystring read-only
This is the facility identification code to send in the MDL path message.
                 usdDsx3MdlPort 1.3.6.1.4.1.4874.2.2.4.1.1.1.20 displaystring read-only
This is the equipment port number to send in the MDL idle signal message.
                 usdDsx3MdlGenerator 1.3.6.1.4.1.4874.2.2.4.1.1.1.21 displaystring read-only
This is the generator number to send in the MDL test signal message.
         usdDs3NextIfIndex 1.3.6.1.4.1.4874.2.2.4.1.2 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdDsx3ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
         usdDsx3FarEndCurrentTable 1.3.6.1.4.1.4874.2.2.4.1.3 no-access
This table contains entries for DS3/E3 interfaces present in the system.
             usdDsx3FarEndCurrentEntry 1.3.6.1.4.1.4874.2.2.4.1.3.1 no-access
Each entry describes the characteristics of an DS3/E3 interface.
                 usdDsx3FarEndCurrentInvalidSeconds 1.3.6.1.4.1.4874.2.2.4.1.3.1.1 perfcurrentcount read-only
The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the current 15 minute interval.
         usdDsx3FarEndIntervalTable 1.3.6.1.4.1.4874.2.2.4.1.4 no-access
This table contains entries for DS3/E3 interfaces present in the system.
             usdDsx3FarEndIntervalEntry 1.3.6.1.4.1.4874.2.2.4.1.4.1 no-access
Each entry describes the characteristics of an DS3/E3 interface.
                 usdDsx3FarEndIntervalInvalidSeconds 1.3.6.1.4.1.4874.2.2.4.1.4.1.1 perfintervalcount read-only
The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in one of the previous 96 individual 15 minute intervals.
         usdDsx3FarEndTotalTable 1.3.6.1.4.1.4874.2.2.4.1.5 no-access
This table contains entries for DS3/E3 interfaces present in the system.
             usdDsx3FarEndTotalEntry 1.3.6.1.4.1.4874.2.2.4.1.5.1 no-access
Each entry describes the characteristics of an DS3/E3 interface.
                 usdDsx3FarEndTotalInvalidSeconds 1.3.6.1.4.1.4874.2.2.4.1.5.1.1 perftotalcount read-only
The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the previous 24 hour interval.
     usdDs3Conformance 1.3.6.1.4.1.4874.2.2.4.4
         usdDs3Compliances 1.3.6.1.4.1.4874.2.2.4.4.1
             usdDs3Compliance 1.3.6.1.4.1.4874.2.2.4.4.1.1
Obsolete compliance statement for entities which implement the Unisphere DS3/E3 MIB. This statement became obsolete when support was added for line type and cell scrambler objects.
             usdDs3Compliance2 1.3.6.1.4.1.4874.2.2.4.4.1.2
Obsolete compliance statement for entities which implement the Unisphere DS3/E3 MIB. This statement became obsolete when support was added for DSU objects.
             usdDs3Compliance3 1.3.6.1.4.1.4874.2.2.4.4.1.3
Obsolete compliance statement for entities which implement the Unisphere DS3/E3 MIB. This statement became obsolete when support was added for dynamic DS3 interface objects.
             usdDs3Compliance4 1.3.6.1.4.1.4874.2.2.4.4.1.4
Obsolete compliance statement for entities which implement the Unisphere DS3/E3 MIB. This statement became obsolete when far end invalid seconds objects and more configuration objects were added.
             usdDs3Compliance5 1.3.6.1.4.1.4874.2.2.4.4.1.5
The compliance statement for entities which implement the Unisphere DS3/E3 MIB.
         usdDs3Groups 1.3.6.1.4.1.4874.2.2.4.4.2
             usdDs3Group 1.3.6.1.4.1.4874.2.2.4.4.2.1
Obsolete collection of objects providing management of DS3/E3 interfaces in a Unisphere product. This group became obsolete when support was added for line type and cell scrambler objects.
             usdDs3Group2 1.3.6.1.4.1.4874.2.2.4.4.2.2
Obsolete collection of objects providing management of DS3/E3 interfaces in a Unisphere product. This group became obsolete when support was added for DSU configuration objects.
             usdDs3Group3 1.3.6.1.4.1.4874.2.2.4.4.2.3
Obsolete collection of objects providing management of DS3/E3 interfaces in a Unisphere product. This group became obsolete when support was added for dynamic DS3 interface objects.
             usdDs3Group4 1.3.6.1.4.1.4874.2.2.4.4.2.4
Obsolete collection of objects providing management of DS3/E3 interfaces in a Unisphere product. This group became obsolete when more configuration objects were added.
             usdDs3Group5 1.3.6.1.4.1.4874.2.2.4.4.2.5
A collection of objects providing management of DS3/E3 interfaces in a Unisphere product.
             usdDs3FarEndGroup 1.3.6.1.4.1.4874.2.2.4.4.2.6
A collection of objects providing remote statistics information applicable to DS3 interfaces in a Unisphere product.