Unisphere-Data-BRIDGE-ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Unisphere-Data-BRIDGE-ETHERNET-MIB
Download as:   
SNMPv2-CONF, Unisphere-Data-MIBs, IF-MIB, SNMPv2-SMI, Unisphere-Data-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usdBridgeEthernetMIB 1.3.6.1.4.1.4874.2.2.31
The Bridge Ethernet MIB for the Unisphere Networks Inc. enterprise.
       usdBridgedEthernetObjects 1.3.6.1.4.1.4874.2.2.31.1
           usdBridgedEthernetIfLayer 1.3.6.1.4.1.4874.2.2.31.1.1
               usdBridgedEthernetNextIfIndex 1.3.6.1.4.1.4874.2.2.31.1.1.1 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdBridgedEthernetIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
               usdBridgedEthernetIfTable 1.3.6.1.4.1.4874.2.2.31.1.1.2 no-access
The parameters for the BridgedEthernet service on this interface.
                   usdBridgedEthernetIfEntry 1.3.6.1.4.1.4874.2.2.31.1.1.2.1 no-access
The Parameters for a particular Bridged Ethernet interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable
                       usdBridgedEthernetIfIfIndex 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.1 interfaceindex read-only
The ifIndex value of the corresponding ifEntry.
                       usdBridgedEthernetProxyArp 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.2 integer read-only
The proxyArp configuration setting for this entry. *** NOTE: This MIB object has been obsoleted. *** Enumeration: 'enableUnrestricted': 2, 'enableRestricted': 1, 'disable': 3.
                       usdBridgedEthernetIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.3 interfaceindexorzero read-only
The ifIndex of an interface over which this Bridged Ethernet interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                       usdBridgedEthernetIfRowStatus 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.4 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdBridgedEthernetIfRowStatus usdBridgedEthernetIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdBridgedEthernetIfIndex must have been determined previously, by reading usdBridgedEthernetNextIfIndex. The interface identified by usdBridgedEthernetIfLowerIfIndex must exist, and must be an interface type that permits layering of Bridged Ethernet above it. A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table.
       usdBridgeEthernetConformance 1.3.6.1.4.1.4874.2.2.31.4
           usdBridgeEthernetCompliances 1.3.6.1.4.1.4874.2.2.31.4.1
               usdBridgedEthernetCompliance 1.3.6.1.4.1.4874.2.2.31.4.1.1
The compliance statement for entities which implement the Unisphere bridged Ethernet MIB.
           usdBridgeEthernetGroups 1.3.6.1.4.1.4874.2.2.31.4.2
               usdBridgedEthernetGroup 1.3.6.1.4.1.4874.2.2.31.4.2.1
A collection of objects providing management of Bridged Ethernet interfaces in a Unisphere product. This group became obsolete when usdBridgedEthernetProxyArp was made obsolete.
               usdBridgedEthernetGroup2 1.3.6.1.4.1.4874.2.2.31.4.2.2
A collection of objects providing management of Bridged Ethernet interfaces in a Unisphere product.