US-HIQ-TRAP-MIB: View SNMP OID List / Download MIB

VENDOR: SIEMENS


 Home MIB: US-HIQ-TRAP-MIB
Download as:   
SNMPv2-CONF, FSC-RTP-MIB-EVENT-MGMT, SNMPv2-SMI, SURPASS-RTP-MIB, SNMPv2-TC, SURPASS-RTP-ADMIN-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hiqTraps 1.3.6.1.4.1.4329.2.18.2.2.1.47
This MIB describes the Siemens Network Convergence LLC RTP trap information. The definition of the event is taken from RtpAdmEventMgmt.mib. For the description of these objects: rtpEvtSequenceNumberIndex, rtpEvtCurrId, rtpEvtSet, rtpEvtNum, rtpEvtSeverity, rtpEvtEventTime, rtpEvtReportingObject, rtpEvtFaultyObject, rtpEvtEndkey, rtpEvtFormatText, rtpEvtParameters, rtpEvtAlarmType, rtpEvtShortText, rtpEvtFilterLastTransId
       hiQSs7FaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.69
Events from Rtp event set 69.
             hiQSS7SCTPAssociationCreated 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.60
The specified SCTP association has been created.
             hiQSS7SCTPAssociationDeleted 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.61
The specified SCTP association has been deleted.
             hiQSS7IPSignalingLinkActivated 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.62
The specified IP signaling link has been activated.
             hiQSS7IPSignalingLinkDeactivated 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.63
The specified IP signaling link has been deactivated.
             hiQSS7M3UARoutingKeyActivated 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.64
The specified M3UA routing key has been activated.
             hiQSS7M3UARoutingKeyDeactivated 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.65
The specified M3UA routing key has been deactivated.
             hiQSS7SCTPNetStatusChange 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.66
The network status of the specified SCTP association has changed.
       hiQEvtFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.100
Events from Rtp event set RTP_NLS_EVT (100).
               hiQProcessExitedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.100.2
Process with given pid exits with given RTP error.
       hiQAudFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.102
Events from Rtp event set RTP_NLS_AUD (102).
               hiQAuditStartingTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.1
The Audit Manager process is starting.
               hiQAudNamedDetectorStartingTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.80
The named detector is starting or restarting.
               hiQAudDetectorWithinLimitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.89
The named detector previously took longer than its configured maximum run interval. It is now running within this limit again.
               hiQAudAvailDiskSpBelowCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.201
The available space in the file system is below the configured critical threshold.
               hiQAudAvailDiskSpBelowMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.202
The available space in the file system is below the configured major threshold.
               hiQAudAvailDiskSpBelowMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.203
The available space in the file system is below the configured minor threshold level.
               hiQAudFreeSpaceOkTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.210
There had been a problem determining the free space on the given file system. The problem no longer exists.
               hiQAudFileSystemBelowMin1Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.211
Available File system space has changed but it is still below one of the configured thresholds.
               hiQAudFileSystemBelowMin2Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.212
Available File system space has echanged but it is still below one of the configured thresholds.
               hiQAudFileSystemBelowMin3Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.213
Available File system space has changed but it is still below one of the configured thresholds.
               hiQAudFileSystemBelowMin4Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.214
Available File system space has changed but it is still below one of the configured thresholds.
               hiQAudFileSystemAboveMinTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.215
Available File system space has increased above the configured minimum threshold level.
               hiQAudFileGrpAboveCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.301
The size of the given file group is monitored by the audit process and has exceeded the configured critical threshold.
               hiQAudFileGrpAboveMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.302
The size of the given file group is monitored by the audit process and has exceeded the configured major threshold.
               hiQAudFileGrpAboveMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.303
The size of the given file group is monitored by the audit process and has exceeded the configured minor threshold.
               hiQAudFileGroupSizeChanged1Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.311
The size of the given file group has changed but is still too high.
               hiQAudFileGroupSizeChanged2Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.312
The size of the given file group has changed but is still too high.
               hiQAudFileGroupSizeChanged3Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.313
The size of the given file group has changed but is still too high.
               hiQAudFileGroupSizeChanged4Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.314
The size of the given file group has changed but is still too high.
               hiQAudFileGrpBelowThreshTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.315
The size of the given file group has previously been reported as too high. The size of this file group has now decreased below all configured thresholds.
               hiQAudProcHeapAboveCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.401
The heap of the named process is above the configured critical threshold.
               hiQAudProcHeapAboveMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.402
The heap of the named process is above the configured major threshold.
               hiQAudProcHeapAboveMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.403
The heap of the named process is above the configured minor threshold.
               hiQAudProcHeapSizeChanged1Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.411
The heap size of the named process has changed, but it is still above one of the configured thresholds.
               hiQAudProcHeapSizeChanged2Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.412
The heap size of the named process has changed, but it is still above one of the configured thresholds.
               hiQAudProcHeapSizeChanged3Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.413
The heap size of the named process has changed, but it is still above one of the configured thresholds.
               hiQAudProcHeapSizeChanged4Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.414
The heap size of the named process has changed, but it is still above one of the configured thresholds.
               hiQAudProcHeapSizeOkTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.415
The heap size of the process is now below all of the configured thresholds.
               hiQAudProcStackAboveCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.421
The program stack size of the named process is above the configured critical threshold.
               hiQAudProcStackAboveMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.422
The program stack size of the named process is above the configured major threshold.
               hiQAudProcStackAboveMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.423
The program stack size of the named process is above the configured minor threshold.
               hiQAudProcStackSizeChanged1Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.431
The stack size of the named process has changed but is still above one of the configured thresholds.
               hiQAudProcStackSizeChanged2Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.432
The stack size of the named process has changed but is still above one of the configured thresholds.
               hiQAudProcStackSizeChanged3Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.433
The stack size of the named process has changed but is still above one of the configured thresholds.
               hiQAudProcStackSizeChanged4Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.434
The stack size of the named process has changed but is still above one of the configured threshold.
               hiQAudProcStackSizeOkTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.435
The stack size of the process is now below all of the configured thresholds.
               hiQAudProcessInfoAvailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.448
The process information for the given process can now be retrieved again.
               hiQAudOSProcNotRunningTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.481
The named OS process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as major.
               hiQAudOSProcInstanceNotRunningTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.482
The named OS process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as major.
               hiQAudProcNotRunningCriticalTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.491
The named process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as critical.
               hiQAudProcessNotRunningMajorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.492
The named process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as major.
               hiQAudProcessNotRunningMinorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.493
The named process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as minor.
               hiQAudProcessRunningTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.496
The named process is now running.
               hiQAudOmniRegisterError1Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.503
The RTP Audit has to register at the OMNI platform for checking OMNI processes. An error occurred when the audit tried to register.
               hiQAudSubsystemRunningTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.508
The given subsystem is now running.
               hiQAudOmniRegisterError2Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.509
The RTP Audit has to register at the OMNI platform for checking OMNI processes. An error occurred when the audit tried to register.
               hiQAudOmniRegisterOkTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.522
Audit can now register at OMNI and thus check OMNI processes.
               hiQAudCpuUtilAboveCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.620
The current CPU utilization is above the configured critical threshold. CPU utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will then be issue.
               hiQAudCpuUtilAboveMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.621
The current CPU utilization is above the configured major threshold. CPU utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will then be issue.
               hiQAudCpuUtilAboveMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.622
The current CPU utilization is above the configured minor threshold. CPU utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will then be issue.
               hiQAudCpuUtilTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.628
Information about the current CPU utilization.
               hiQAudCpuUtilBelowThreshTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.629
The current CPU utilization is now below all configured thresholds.
               hiQAudCpuUtilChangedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.630
The current CPU utilization has changed but is still above one of the configured threshold.
               hiQAudSwapSpaceAboveCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.640
The swap space utilization is above the configured critical threshold. Swap space checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudSwapSpaceAboveMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.641
The swap space utilization is above the configured major threshold. Swap space checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudSwapSpaceAboveMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.642
The swap space utilization is above the configured minor threshold. Swap space checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudSwapUtilTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.648
Information about the current swap space utilization.
               hiQAudSwapUtilBelowThreshTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.649
Current swap space utilization is now below all configured thresholds.
               hiQAudSwapUtilChangedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.650
The swap space utilization has changed, but it is still above one of the configured thresholds.
               hiQAudMemUtilAboveCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.660
The current memory utilization is above the configured critical threshold. Memory utilization checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudMemUtilAboveMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.661
The current memory utilization is above the configured major threshold. Memory utilization checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudMemUtilAboveMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.662
The current memory utilization is above the configured minor threshold. Memory utilization checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudMemUtilTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.668
Information about the current memory utilization.
               hiQAudMemUtilBelowThreshTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.669
The current memory utilization is now below all configured thresholds.
               hiQAudMemUtilChangedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.670
The current memory utilization has changed but is still above one of the configured thresholds.
               hiQAudShMemUtilTooAboveCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.680
The number of currently used shared memory ids is above the configured critical threshold. Shared memory ids checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudShMemUtilTooAboveMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.681
The number of currently used shared memory ids is above the configured major threshold. Shared memory ids checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudShMemUtilTooAboveMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.682
The number of currently used shared memory ids is above the configured minor threshold. Shared memory ids checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudShMemUtilTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.688
Information about the current shared memory id utilization.
               hiQAudShMemUtilBelowThreshTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.689
The number of currently used shared memory ids is now below all configured thresholds.
               hiQAudShMemUtilChangedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.690
The number of currently used shared memory ids has changed, but is still above one of the configured thresholds.
               hiQAudSemUtilAboveCritThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.700
The number of currently used semaphores is above the configured critical threshold. Semaphore utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudSemUtilAboveMajorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.701
The number of currently used semaphores is above the configured major threshold. Semaphore utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudSemUtilAboveMinorThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.702
The number of currently used semaphores is above the configured minor threshold. Semaphore utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued.
               hiQAudSemUtilTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.708
Information about the current semaphore utilization.
               hiQAudSemUtilBelowThreshTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.709
The number of currently used semaphores is now below all configured thresholds.
               hiQAudSemUtilChangedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.710
The number of currently used semaphores has changed, but is still above one of the configured thresholds.
       hiQNmFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.107
Events from Rtp event set RTP_NLS_NM (107).
               hiQNmProcessInitCompleteTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.1
Process called RtpNmReady() to indicate, that it finished its initialization phase successfully.
               hiQNmProcessExitedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.3
Could not lower given process priority.
               hiQNmDbUnreachable1Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.5
The database could not be reached from the RTP node manager process.
               hiQNmDbMaxProcGrpExceededTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.8
The database contains more than can be handled by the RTP node manager process. The node manager ignores these entries.
               hiQNmDbUnreachable2Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.9
The database could not be reached from the RTP node manager process.
               hiQNmDbTableNotOpenedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.10
The database table could not be opened by the RTP node manager process.
               hiQNmDbTableNotClosedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.11
The database table could not be closed the RTP node manager process.
               hiQNmProcessReadyTimeoutTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.12
Process did not call RtpNmReady() within the specified time.
               hiQNmProcessHealthChkTimeoutTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.13
Process did not answer the healthcheck in time.
               hiQNmNodeShutdownTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.19
Node will be stopped on behalf of the specified process.
               hiQNmQueueCorruptedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.22
The queue of process %s is not in a consistent state. The process will be restarted which will clear the queue.
               hiQNmNodeMgrStartingTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.31
RTP local node manager starting.
               hiQNmProcessRestartShortTimeTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.36
Process restarts too soon. The node manager will now wait seconds, before it tries again to bring the process up.
               hiQNmQueueAllocErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.39
The process queue could not be allocated, due to problems with shared memory.
               hiQNmResizeGlobalProcTblTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.42
The number of processes on another node has changed due to a node restart. As a consequence the process table for that node must be resized.
               hiQNmAliasTableLenExceededTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.43
The RTP parameter Rtp/Nm/MaxAliases must be greater or equal to the number of aliases configured by tcn files or by the GUI/CLI.
               hiQNmAliasMembersExceededTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.44
The RTP parameter Rtp/Nm/ProcsPerAlias specified the maximal number of members for all aliases. This parameter must suffice for all alias members configured by tcn files or CLI/GUI.
               hiQNmProcessExecvErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.46
The binary could not be started since RTPexecv returned the errno. If restart is set for the RTP process, it will be restarted by RTP.
               hiQNmProcessExitedwithCodeTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.47
Rtp process which name and pid are given exits with given code and to a given state.
               hiQNmProcessTerminatedBySignalTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.48
Rtp process which name and pid are given was killed by given signal while in a given status .
               hiQNmProcessCoreCreatedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.49
The core is found in the directory $HOME/$PLID/core if the core was written by RtpWriteCore().
               hiQNmDiagnosticErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.53
The occurrence of this event is not necessarily a problem, but it might help with diagnosing related problems.
               hiQNmNodeDownMsgErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.102
When trying to send the NODEDOWN message to the specified node an error occurred. The NODEDOWN message is very important for an orderly termination of the shutdown.
               hiQNmNodeMgrSignalRestartTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.104
A signal of type SIGTERM, SIGINT or SIGQUIT was sent to the node manager.
       hiQTicFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.111
Events from Rtp event set 111.
               hiQTicDiskFullTicketPoolFailed 1.3.6.1.4.1.4329.2.18.2.2.1.47.111.7
Configured ticket pool disk partition is full.
               hiQTicCopyToTicketPoolFailed 1.3.6.1.4.1.4329.2.18.2.2.1.47.111.23
The super node manager tried to start an already running subsystem.
               hiQTicPoolDiskDevNotAccessible 1.3.6.1.4.1.4329.2.18.2.2.1.47.111.47
Configured ticket pool disk device is not accessible.
       hiQSnmFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.119
Events from Rtp event set RTP_NLS_SNM (119).
               hiQSnmSubsysAlreadyRunningTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.1
The super node manager tried to start an already running subsystem.
               hiQSnmSubsystemStartErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.2
The super node manager can't start the mentioned subsystem. The associated start script returns an error.
               hiQSnmSubsystemStartSuccessTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.3
The super node manager started the mentioned subsystem successfully.
               hiQSnmSubsystemStopSuccessTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.6
The super node manager stopped the mentioned subsystem successfully.
               hiQSnmSubsysAdmInterventionTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.7
The health detector script of the mentioned subsystem requires an administrator intervention.
               hiQSnmRtpRestartForSubsystemTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.10
The health detector script of the mentioned subsystem requires to restart the whole RTP. Refer to the logfile of the health detector script in $HOME/$PLID/log for the reason.
               hiQSnmRebootForSubsystemTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.11
The health detector script requires to reboot the system. Refer to the logfile of the health detector script in $HOME/$PLID/log for more informations.
               hiQSnmSystemSwitchOffTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.13
The health detector script requires to switch off the system. Refer to the logfile of the health detector script in $HOME/$PLID/log for more informations.
               hiQSnmSpecialActScrSuccessTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.18
The special action script of the mentioned subsystem returns successfully.
               hiQSnmClusterChangeTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.20
The super node manager detects a cluster change via the interface to the cluster software.
               hiQSnmStartupSuccessTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.22
The super node manager process started successfully.
               hiQSnmStartupFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.39
The super node manager fails to start a single subsystem during the start of the whole RTP. For this reason, the start of the RTP cannot be continued, and all subsystems having been started so far, are stopped.
               hiQSnmSubsysRestartSuccessTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.45
The super node manager has tried to restart the subsystem without success in the past, but now the subsystem is detected as running again.
               hiQSnmSubsysRestartSuccDepTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.46
The super node manager has tried to restart the subsystem without success in the past, but now the subsystem is detected as running again. The super node manager will restart depending subsystems as well.
               hiQSnmSubsysFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.49
The super node manager ran the detector for the given subsystem, and it failed.
               hiQSnmClusterChangeInfoSentTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.51
The super node manager managed to inform the local RTP node manager about a change in the cluster configuration.
               hiQSnmRtpPlatformPlidReportTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.60
The super node manager reports the ID with which the RTP platform is started.
               hiQSnmRtpNodeUpTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.100
The super node manager reports that the node is up.
               hiQSnmRtpNodeUpWasDownTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.101
The super node manager reports that the node that was down is now up.
               hiQSnmRtpNodeDownTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.102
The super node manager reports that the node is down.
               hiQSnmRtpNodeDownWasUpTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.103
The super node manager reports that the node that was up is now down.
               hiQSnmNodeInfoMismatchTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.109
The super node manager detects a mismatch between the own node information (name and ID) listed in the RtpClustertab and the node information supplied by the cluster software.
               hiQSnmRmsWorkingAgainTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.135
The super node manager finds that the RMS is working again after a failure had been detected in the past. The Reliant Monitor System is responsible for monitoring the cluster interconnect and the current cluster configuration, i.e. which nodes currently belong to the cluster and which do not.
               hiQSnmSpsClusterSwInstalledTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.137
The super node manager found that the SPS (Siemens Parallel Server) cluster software is installed. It will retrieve its cluster configuration information from SPS.
               hiQSnmRmsClusterSwInstalledTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.139
The super node manager found that the RMS cluster software is installed. It will retrieve its cluster configuration information from RMS. The Reliant Monitor System is responsible for monitoring the cluster interconnect and the current cluster configuration, i.e. which nodes currently belong to the cluster and which do not.
               hiQSnmCfNodeStatusTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.145
The status of the given CF (Cluster Foundation) node is reported when the super node manager starts up or when a state change on the node happened.
               hiQPrimeClusterInstalledSnmTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.147
The super node manager found that the PRIMECLUSTER/CF cluster software is installed. It will retrieve its cluster configuration information from CF (Cluster Foundation).
               hiQSnmSunCluster30InstalledTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.163
The super node manager found that the SunCluster 3.0 cluster software is installed. It will retrieve its cluster configuration information from SunCluster 3.0.
               hiQSnmSunCluster22InstalledTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.173
The super node manager found that the Sun Cluster 2.2 cluster software is installed. It will retrieve its cluster configuration information from Sun Cluster 2.2.
       hiQLogOracleFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.140
Events from Rtp event set RTP_NLS_ORA (140).
               hiQLogOracleDeadlockDetectedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.104
All available public servers are servicing requests that require resources locked by a client which is unable to get a public server to release the resources. The number of servers is limited by the system parameter MTS_MAX_SERVER.
               hiQLogOracleDbStartShutErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.106
An attempt was made to start or shut down an instance while connected to a shared server via a dispatcher.
               hiQLogOracleRecovSessionCnclTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.283
An error during recovery was determined to be fatal enough to end the current recovery session.
               hiQLogOracleBackProcessFatalTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.447
One of the background processes died unexpectedly. The background trace file in BACKGROUND_DUMP_DEST may have more information.
               hiQLogOracleServerSessFatalTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.603
An Oracle Server session is in an unrecoverable state.
               hiQLogOracleFatalConnErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.1073
An illegal internal operation was attempted.
               hiQLogOracleFatalLogMinerTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.1280
One of the following: - One or more input parameters in the DBMS_LOGMNR.START_LOGMNR() procedure may be invalid. - The start or the end SCN may not be available in the log files selected. - The dictionary file specified may be from a different database.
               hiQLogOracleSevereErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.2068
A severe error (disconnect, fatal Oracle error) was received from the indicated database link.
               hiQLogOracleTwoTaskCommErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.3106
The communication path between Oracle and the user task has stopped. This is an internal error message not usually issued.
               hiQLogOracleDisconnectFailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6300
A fatal error occurred during the disconnect from the server. This was probably caused by inaccessible message queues.
               hiQLogOracleIpaResetConnErrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6307
A fatal error occurred during the resetting of the connection.
               hiQLogOracleIpaEvtSetupFailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6314
Fatal interprocess communication error.
               hiQLogOracleIpaSharedMemErrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6322
An internal error has occurred in the shared memory handling.
               hiQLogOracleIpaCauseEventErrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6323
Fatal interprocess communication error.
               hiQLogOracleRemFileServerErrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.16041
The Remote File Server (RFS) process at the standby destination archive log site has encountered a disabling error and is no longer available. Further archiving to the standby site may not be possible.
               hiQLogOracleProgramTermByErrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.21503
A program is in an unrecoverable error state.
               hiQLogOracleRemPortConnErrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.27541
Either the remote address is not valid, or the process is in a state which does not allow connection.
               hiQLogOracleLostRpcConnRemTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.28511
A fatal error occurred in one of the following places: the connection between the Oracle server and the agent, the heterogeneous services remote agent itself, the connection to the non-Oracle system. This error occurred after loss of communicatio.
               hiQLogOracleLostRpcConnExtTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.28576
A fatal error occurred in either an RPC network connection, the external procedure agent, or the invoked 3GL after communication had been established successfully.
       hiQLogSolidFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.141
Events from Rtp event set RTP_NLS_SOLID (141).
               hiQSolidTooManyClientsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.12
The specified user failed to connect due to too many connected clients.
               hiQSolidNewConnsAllowedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.13
New database connections are allowed.
               hiQSolidNoNewConnsAllowedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.20
The Solid database server is in a fatal state - no new connections are allowed.
               hiQSolidFlowEngineStartedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.119
The Solid database server was started.
               hiQSolidServerStartFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.120
The Solid database failed to start.
               hiQSolidFlowEngineIntErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.130
The Solid FlowEngine process has encountered an internal error and is unable to continue normally.
               hiQSolidFatalErrSrvShutdownTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.149
An emergency shutdown of the Solid database server has occurred due to a fatal error.
               hiQSolidFatalErrSrvNotStartTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.150
The Solid database server was not started due to a fatal error.
               hiQSolidDatabaseStartedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.151
The Solid database was started.
               hiQSolidDbConvertedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.201
The Solid database was successfully converted.
               hiQSolidOldDbVersionTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.204
The Solid database is from an older version of Solid.
               hiQSolidNewDbNotCreatedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.205
The new Solid database was not created.
               hiQSolidDbDoesNotExistsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.206
The Solid database does not exist.
               hiQSolidDbOpenFailureTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.207
The Solid database failed to open.
               hiQSolidDbIndexTestSuccessTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.224
The Solid database index has been tested and is OK.
               hiQSolidDbIndexErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.225
The index for the specified Solid database is not OK.
               hiQSolidDbTstOpenFailureTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.226
The Solid database failed to open for testing with a fatal error.
               hiQSolidDbTstConnectFailureTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.227
The Solid database failed to connect for testing with a fatal error.
               hiQSolidCreateNewDbFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.240
A failure occurred when creating a new Solid database.
               hiQSolidTableConvertedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.247
The specified Solid database table was converted.
               hiQSolidDbOpeningProblemTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.249
A problem was encountered when opening a Solid database.
               hiQSolidDbBrokenCopyTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.254
The Solid database is a broken hot standby or netcopy database.
               hiQSolidBackupSuccessTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.300
The Solid backup completed successfully.
               hiQSolidBackupFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.304
The Solid backup failed.
               hiQSolidStartedHSBPrimaryTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.500
Started as a hot standby primary.
               hiQSolidStartedHSBSecondaryTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.501
Started as a hot standby secondary.
               hiQSolidHSBSwitchPrimErrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.512
Failed to switch hot standby role to primary with the specified error.
               hiQSolidHSBSwitchSecErrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.513
Failed to switch hot standby role to secondary with the specified error.
               hiQSolidBothHSBDbPrimaryTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.515
Both Solid hot standby databases are marked as primary.
               hiQSolidDatabaseStarted2Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.572
The Solid database was started.
               hiQSolidDbServerCorruptTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.1101
The single database server is corrupted.
               hiQSolidLocalDbServerCorruptTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.1103
The local database server is corrupted.
       hiQUceFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.176
The UCE Fault Management MOs.
               hiQUceReadyTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.176.8
       hiQIsupFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.177
The ISUP Fault Management MOs.
               hiQIsupRsetNotAvailable 1.3.6.1.4.1.4329.2.18.2.2.1.47.177.7
The RouteSet is not available. The faulty object will contain the DPC for which the alarm is being generated.
               hiQIsupRsetAvailable 1.3.6.1.4.1.4329.2.18.2.2.1.47.177.8
The RouteSet is available. The faulty object will contain the DPC for which the alarm is being cleared.
       hiQMgcpFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.178
The MGCP Fault Management MOs.
               hiQMgcpNoResponseTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.2
MGCP: This trap indicates the processing error due to no response from Media Gateway.
               hiQMgcpMtaTimeOutMsgTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.3
MGCP: This trap indicates that the NCS Media Gateway endpoint does not respond to the following message from hiQ 8000, namely, the timer has expired: msg msgType ********************************************** CreateConnection CRCX ModifyConnection MDCX DeleteConnection DLCX NotificationRequest RQNT AuditEndpoint AUEP ********************************************** rtpEvtShortText will be as follows: msgType TransactionID EndPointID@Hostname Protocol where: msgType as in the above table TransactionID 0..999,999,999 EndPointID(Id for Line/DS0) aaln/1, aaln/2, aaln/3, aaln/4 Hostname FQDN Protocol MGCP 1.0 NCS 1.0 For example: CRCX 18 aaln/1@motomta101.ipfonix.com MGCP 1.0 NCS 1.0 This trap is informational. There is no corresponding trap for its abatement(clear). To avoid flooding the element manager system, this trap will be suppressed if the same msgType is received from the same hostname twice in a pre-determined suppresion interval of 15 seconds.
               hiQMgcpInvalidRxMsgTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.4
MGCP: This trap indicates the processing error due to receiving invalid messages.
               hiQMgcpMtaErrorCodeReasonMsgTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.5
MGCP: This trap indicates NCS Media Gateway endpoint has reported an ErrorCode or a Reason Code: error code commentary ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 400 The transaction could not be executed, due to a transient error 502 The transaction could not be executed because the endpoint does not have sufficient resources 504 Unknown or unsupported command (this code is in RFC3435, but not in PacketCable NCS I07) 507 Unsupported functionality (this code is in RFC3435, but not in PacketCable NCS I07) 508 Unknown or unsupported quarantine handling 510 The transaction could not be executed because a protocol error was detected 516 The transaction refers to an unknown call-id 518 Unsupported or unkown package 520 The transaction could not be executed because the endpoint is restarting 526 Insufficient bandwidth 528 Incompatible protocol version 529 Internal hardware failure 534 Codec negotiation failure^M reason code commentary ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 900 Endpoint malfunctioning 901 Endpoint taken out of service 902 Loss of lower layer connectivity (e.g., downstream sync) 903 QoS resource reservation was lost An example of rtpEvtShortText will be as follows: errorCode or reasonCode Commentary TransactionID EndPointID@Hostname Protocol where: error code or reason code as in the above Commentary as in the above TransactionID 0..999,999,999 EndPointID(Id for the Line or DS0) aaln/1, aaln/2, aaln/3, aaln/4 Hostname fully qualified domain name Protocol MGCP 1.0 NCS 1.0 An example of rtpEvtShortText will be as follows: 520 Endpoint malfunctioning 18 aaln/1@motomta101.ipfonix.com MGCP 1. 0 NCS 1.0 This trap is informational. There is no corresponding trap for its its abatement(clear). To avoid flooding the element manager system, this trap will be suppressed if the same msgType is received from the same hostname twice in a pre-determined suppresion interval of 15 seconds.
               hiQCcmStatMgmtStartedUp 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.8
The Ccm Statistics Manager started properly.
               hiQCcmStatMgmtStartupFailed 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.9
The Ccm Statistics Manager failed to start properly.
               hiQMgcp500ResponseMsgs 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.10
Msg sent to invalid address or ckt::. This trap is requested when CCM receives 500 response from MTA, even after message sent to the DNS Query resulted new IP Address for the MTA.
               hiQMgcpInvalidMTARecognized 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.11
The MTA is not recognized.
       hiQH323FaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.180
The H323 Fault Management MOs.
               hiQH323ResourceFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.3
H323 SM, static/dynamic resource allocation or deallocation failed.
               hiQH323TxCongestionStartTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.4
H323 SM has congestion started for the Tx queue. New calls will be dropped.
               hiQH323TxCongestionDropTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.5
H323 SM has congestion dropped for the Tx queue. Active calls are dropping.
               hiQH323TxCongestionStopTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.6
H323 SM has congestion stopped for the Tx queue. All calls are accepted. This will clear any congestion trap for Tx queue.
               hiQH323InitFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.11
H323 SM Initialization has failed.
               hiQH323InitializedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.12
H323 SM Initialization has succeeded.
       hiQAucAuthFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.181
The AUC, Authentication (AUTH) Fault Management MOs.
               hiQAucClientInitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.2
AUC: Authentication client is initialized.
               hiQAucClientImproperInitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.3
AUC: Authentication client is improperly initialized.
               hiQAucAuthRtpMsgTxTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.10
AUC: RTP message is not properly sent from Authentication server.
               hiQAucAuthServerLinkUpTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.14
AUC: Link to A3 database from Authentication server is up. This will clear A3 link down trap.
               hiQAucAuthServerLinkDownTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.15
AUC: Link to A3 database from Authentication server is down.
       hiQAucUscFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.182
The AUC, User Collection(USC) Fault Management MOs.
               hiQAucUscClientInitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.1
AUC: Usage Collection client is initialized.
               hiQAucUscClientImproperInitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.2
AUC: Usage Collection client is improperly initialized.
               hiQAucUscServerInitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.3
AUC: Usage Collection server is initialized.
               hiQAucUscServerImproperInitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.4
AUC: Usage Collection server is improperly initialized.
               hiQAucUscServerFtpUpTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.9
AUC: Link to Primary FTP site from Usage Collection server is up. It clears the Link Down trap for FTP site.
               hiQAucUscServerFtpDownTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.10
AUC: Link to Primary FTP site from Usage Collection server is down.
               hiQAucUscServerDeleteCdrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.12
AUC: Usage Collection Server is unable to delete CDR file from RTP.
               hiQAucUscServerRxCdrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.14
AUC: Usage Collection server has failed to receive CDR file from RTP.
               hiQAucUscServerTxCdrTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.15
AUC: Usage Collection server has failed to send CDR file to FTP site.
               hiQAucUscServerBackupUpTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.16
AUC: Link to Backup FTP site from Usage Collection server is up.
               hiQAucUscServerBackupDownTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.17
AUC: Link to Backup FTP site from Usage Collection server is down.
               hiQAucUscServerFaultyBillingTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.19
AUC: Usage Collection Server trap: Faulty Billing File is being sent to Billing Server as binary and marked as an error.
               hiQAucUscPriStorNotPossibleTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.35
Primary storage of CDR billing data is no longer possible on this node. This may be caused by lack of disk space or the cdr disk partition is not writable.
               hiQAucUscPriStorOKTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.36
Primary storage of CDR billing data is possible on this node.
               hiQAucUscSecStorNotPossibleTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.37
Secondary storage of CDR billing data is no longer possible on this node. This may be caused by lack of disk space or the cdr disk partition is not writable.
               hiQAucUscFileSeqNumberErrorTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.38
The CDR file sequence number may be incorrect. This is caused by a database read or write error.
               hiQAucUscLocalSecStorageOk 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.39
Secondary storage of CDR billing data is OK on this node.
               hiQAucUscStbPriFTPLinkUp 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.40
Usage collection: Standby primary ftp link is up.
               hiQAucUscStbPriFTPLinkDown 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.41
Usage collection: Standby primary ftp link is down.
               hiQAucUscStbBackupFTPLinkUp 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.42
Usage collection: Standby backup ftp link is up.
               hiQAucUscStbBackupFTPLinkDown 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.43
Usage collection: Standby backup ftp link is down.
       hiQXdmFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.183
The XDM Fault Management MOs.
               hiQXdmInitializedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.183.1
XDM process is initialized and ready to process translation/routing commands.
               hiQXdmNotTerminatedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.183.4
XDM process is not properly shutdown.
               hiQXdmXlaInitializedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.183.14
XDM initialized the XLA shared memory from the database.
               hiQXdmXlaNotInitializedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.183.15
XDM failed to initialize the XLA shared memory from the database.
       hiQOmapFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.187
The OMAP Fault Management MOs.
               hiQOmapInitFailureTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.1
OMAP initialization failure.
               hiQOmapMissingPriTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.20
OMAP:Call processing failed. There is missing PRI info in UCE setup message, aborting the call.
               hiQOmapBchBusyTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.21
OMAP:Call processing failed. Setting B-ch busy failed.
               hiQOmapMissingChannelTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.26
OMAP:Call processing failed. Missing channel info in OMAP setup, aborting the call.
               hiQOmapSaveCallTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.27
OMAP:Call processing failed, unable to save call Id in RTM.
       hiQCdmFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.188
The CDM Fault Management MOs.
               hiQCdmInitializedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.1
CDM is initialized and ready to process ISDN configuration commands.
               hiQCdmNotInitializedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.2
CDM process did not start correctly and is unable to process ISDN configuration commands.
               hiQCdmTerminatedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.3
CDM process is being shut down and will not process further ISDN configuration commands.
               hiQCdmNotTerminatedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.4
CDM process is not properly shut down.
               hiQCdmSendToMgTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.19
CDM can not send provisioning data to a Media Gateway shelf.
               hiQCdmReceiveFromMgTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.20
CDM failed to receive data from a Media Gateway shelf.
               hiQCdmMgShelfRebootedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.23
CDM, Media Gateway shelf has been rebooted successfully.
               hiQCdmMgShelfNotRebootedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.24
CDM, Media Gateway shelf has not benn rebooted successfully.
               hiQCdmMgProvisioningTimedOutTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.25
CDM, Media Gateway shelf did not respond to provisioning with an acknowledgement within certain time.
               hiQCdmMgProvisioningFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.26
CDM, Media Gateway shelf did not respond to provisioning with a failure acknowledgement.
               hiQCdmMgConnectionSuccessTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.27
CDM, a connection was successfully established between CDM and a Media Gateway shelf.
               hiQCdmMgConnectionFailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.28
CDM,a connection was not successfully established between CDM and a Media Gateway shelf.
       hiQPrmFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.189
The PRM Fault Management MOs.
       hiQOvlFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.190
The Overload Fault Management MOs.
               hiQOvlCongLevelToCL3Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.2
OVL: This Trap is sent to report various Over Load Manager Major (Critical) Congestion Level conditions for several signaling managers including 'ISUP', 'OMAP', 'H323', 'MGCP', and 'SIP+'. This informs that congestion level changed from CL* to CL3 for a certain SM. This will clear up previos CL2 level trap. CL3 means highest level of congestion and CL0 means no congestion.
               hiQOvlCongLevelToCL2Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.3
OVL: This Trap is sent to report various Over Load Manager Major (Critical) Congestion Level conditions for several signaling managers including 'ISUP', 'OMAP', 'H323', 'MGCP', and 'SIP+'. This informs that congestion level changed from CL* to CL2 for a certain SM. This will clear previous CL1 or CL3 traps from which it changed from. CL3 means highest level of congestion and CL0 means no congestion.
               hiQOvlCongLevelToCL1Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.4
OVL: This Trap is sent to report various Over Load Manager Major (Critical) Congestion Level conditions for several signaling managers including 'ISUP', 'OMAP', 'H323', 'MGCP', and 'SIP+'. This informs that congestion level changed from CL* to CL1 for a certain SM. This will clear previous CL2 traps from which it changed from. CL3 means highest level of congestion and CL0 means no congestion.
               hiQOvlCongLevelToCL0Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.5
OVL: This Trap is sent to report to clear various Over Load Manager Major (Critical) Congestion Level conditions for several signaling managers including 'ISUP', 'OMAP', 'H323', 'MGCP', and 'SIP+'. This informs that congestion level changed to 0 level congestion. This will clear any previous CL* traps. CL3 means highest level of congestion and CL0 means no congestion.
               hiQOvlNewCallsExceedingTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.6
OVL: New-call attempts exceeding limit of number in time interval of millisecs.
               hiQOvlNewCallsBelowLimitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.7
OVL: New-call attempts below limit of number in time interval of millisecs. This trap clears New-call attempts exceeding limit trap.
               hiQOvlNewCallsBlockTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.8
OVL: Call processing status set to block new calls for a SM.
               hiQOvlNewCallsAcceptTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.9
OVL: Call processing status set to accept new calls for a SM. This trap clears the set to block new calls trap.
               hiQOvlCongLevelChangeTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.10
OVL: This Trap is sent to clear various Over Load Manager Major Congestion Level conditions before reporting a new level.
       hiQDbFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.191
The DB Fault Management MOs.
               hiQDBInitCompleteTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.191.10
Process DBManager has completed initialization.
               hiQDBOperationalTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.191.33
Process DBManager operational error has occurred.
       hiQTcapFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.192
The TCAP Fault Management MOs.
               hiQTcapInstanceReadyTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.192.8
TCAP Instance is ready for Call Processing. It will clear the TCAP Exited trap.
       hiQLnpFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.193
The LNP Fault Management MOs.
               hiQLnpSuccessfulRegistrationTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.193.1
LNP successfully registered for use within call processing. It clears the failed registration trap.
               hiQLnpFailedRegistrationTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.193.2
LNP registration failed for use within the call processing.
       hiQOmapDispFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.194
The Omap Fault Management MOs.
               hiQOmapDispInitFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.5
OMAP Dispatcher initialization has failed. and probable cause is RTP related functionality. This will abort the Dispatcher.
               hiQOmapDispConnToMgDownTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.6
OMAP Dispatcher process failed to connect to Media Gateway.
               hiQOmapDispStartedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.21
OMAP Dispatcher process started successfully.
               hiQOmapDispConnToMgUpTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.22
OMAP Dispatcher process succeeded to connect to Media Gateway.
               hiQOmapDispConnFailOverFailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.23
OMAP Dispatcher process failed to connect to another dispatcher when dispatcher connection to MG is down.
               hiQOmapDispConnFailOverSuccTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.24
OMAP Dispatcher process successfully connected to another dispatcher when dispatcher connection to MG is down.
       hiQSipFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.198
The SIP Fault Management MOs.
               hiQSipStartUpTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.198.1
SIP SM process is up and running.
       hiQRtmFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.199
The ISDN Fault Management MOs.
               hiQRtmStartedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.199.1
RTM process started properly.
               hiQRtmInitFailedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.199.2
RTM Initialization failed. A probable cause could be RTP related resource.
       hiQSoapServerFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.207
The SOAP Server Fault Management Messages.
               hiQSubMgmtRemoveResourceError 1.3.6.1.4.1.4329.2.18.2.2.1.47.207.5
The job to remove subscriber management resources failed.
               hiQSubMgmtRemoveResourceSuccess 1.3.6.1.4.1.4329.2.18.2.2.1.47.207.6
The job to remove subscriber management resources completed successfully.
       hiQSmdiFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.208
The SMDI Fault Management Messages.
               hiQSmdiStartingUp 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.1
The SMDI process is being initialized.
               hiQSmdiDbError 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.3
SMDI process could not be initialized due to a database error.
               hiQSmdiDbErrorCleared 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.4
The SMDI error caused by database initialization was resolved by manual intervention.
               hiQSmdiLinkError 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.5
SMDI process could not establish a link within the provisioned amount of time and tries. Manual intervention is required for immediate reconnection.
               hiQSmdiLinkUp 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.6
SMDI process has resolved the previously reported link error.
               hiQSmdiREcvIPAddrPortError 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.7
An error occurred during initialization of the SMDI receive IP address and port.
               hiQSmdiRecvIPAddrPortOk 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.8
Trap indicates that SMDI (Simplified Message Desk Interface) can listen on the IP address and port.
       hiQCstaFaultMgmt 1.3.6.1.4.1.4329.2.18.2.2.1.47.210
The CSTA Fault Management Messages.
               hiQCstaStartedUp 1.3.6.1.4.1.4329.2.18.2.2.1.47.210.1
The CSTA signaling manager process started properly.
               hiQCstaCAPLinkUp 1.3.6.1.4.1.4329.2.18.2.2.1.47.210.4
The link to the CAP (Common Application Platform) is up.
               hiQCstaTTUDRegistrationFailure 1.3.6.1.4.1.4329.2.18.2.2.1.47.210.5
The CSTA SM process was unable to register with the TTUD process.
               hiQCstaTTUDRegistrationSuccess 1.3.6.1.4.1.4329.2.18.2.2.1.47.210.6
The CSTA SM process registered successfully with the TTUD process.
       hiQTcaFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.216
Events from TCA event set TCA_EVT_SET_ID (216).
               hiQTcaL3CommunicationTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.1
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2CommunicationTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.2
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1CommunicationTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.3
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3ServiceTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.4
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2ServiceTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.5
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1ServiceTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.6
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3ProcessingTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.7
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2ProcessingTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.8
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1ProcessingTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.9
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3EquipmentTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.10
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2EquipmentTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.11
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1EquipmentTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.12
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3EnvironmentTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.13
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2EnvironmentTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.14
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1EnvironmentTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.15
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3DatabaseTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.16
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2DatabaseTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.17
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1DatabaseTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.18
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3MibTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.19
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2MibTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.20
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1MibTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.21
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3SecurityTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.25
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2SecurityTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.26
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1SecurityTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.27
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3SS7Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.28
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2SS7Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.29
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1SS7Trap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.30
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL3IndicationTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.31
The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL2IndicationTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.32
The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaL1IndicationTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.33
The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval.
               hiQTcaClearedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.100
The number of logged entries for the specified log category has not crossed the threshold that caused a previous alarm for a certain period of time.
       hiQGlobalFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.217
Events from global event set GLOBAL_EVT_SET_ID (217).
               hiQGlobalCriticalLossOfCommsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.1
This event is used to report a critical loss of communication.
               hiQGlobalMajorLossOfCommsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.2
This event is used to report a major loss of communication.
               hiQGlobalMinorLossOfCommsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.3
This event is used to report a minor loss of communication.
               hiQGlobalCommsEstablishedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.4
This event is used to report that communication has been (re-)e established.
               hiQGlobalProcessInitActiveTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.5
The process has started successfully.
               hiQGlobalProcSevereInitFailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.6
The process encountered an error during initialization and cannot continue.
               hiQGlobalProcPartialInitFailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.7
This trap is used to report that the specified process encountered a partial initialization failure.
               hiQGlobalProcAbnormalTermTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.8
This trap is used to report that the specified process terminated abnormally.
               hiQGlobalProcessAliasGrpAvail 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.9
The process Alias group, which is a collection of redundant processes, is available.
               hiQGlobalProcessAliasGrpUnavail 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.10
The process Alias group, which is a collection of redundant processes, is not available. This means that none of the functions provided by these processes is available.
               hiQGlobalResourceExceedLimitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.11
The specified resource has exceeded a defined limit.
               hiQGlobalResourceWithinLimitTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.12
The specified resource is within the defined limit.
               hiQVeryImportantFuncUnavailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.13
This trap is used to report that the specified function is unavailable.
               hiQImportantFuncUnavailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.14
This trap is used to report that the specified function is unavailable.
               hiQGlobalFuncUnavailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.15
This trap is used to report that the specified function is unavailable.
               hiQGlobalFuncAvailTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.16
This trap is used to report that the specified function is available.
               hiQGlobalMsgQueueAboveHighThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.17
This trap is used to report that the number of elements in the specified queue has exceeded a defined threshold limit.
               hiQGlobalMsgQueueAboveMedThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.18
This trap is used to report that the number of elements in the specified queue has exceeded a defined threshold limit.
               hiQGlobalMsgQueueAboveLowThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.19
This trap is used to report that the number of elements in the specified queue has exceeded a defined threshold limit.
               hiQGlobalMsgQueueBelowThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.20
This trap is used to report that the number of elements in the specified queue is below the defined threshold limit.
               hiQGlobalVerySevereDegradedCommsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.21
This event is used to report that the specified communication link is either congested or operating in a degraded state.
               hiQGlobalSevereDegradedCommsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.22
This event is used to report that the specified communication link is either congested or operating in a degraded state.
               hiQGlobalDegradedCommsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.23
This event is used to report that the specified communication link is either congested or operating in a degraded state.
               hiQGlobalCommsOperationalTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.24
This event is used to report that the specified communication link is operational.
       hiQSecurityFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.218
Events from security event set SECURITY_EVT_SET_ID (218).
               hiQSecurityFirewallTrigTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.218.1
The firewall has started to discard IP packets. The number of IP packets/second/user from at least a single user has exceeded the configured threshold.
               hiQSecurityFirewallTrigClearTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.218.2
The condition causing the triggering of the firewall has been cleared. No more IP packets are being discarded.
       hiQHardwareFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.219
Events from hardware event set HARDWARE_EVT_SET_ID (219).
               hiQVerySevereHardwareFailureTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.1
A very severe HW failure has been detected.
               hiQSevereHardwareTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.2
A severe HW failure has been detected.
               hiQHardwareFailureTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.3
A HW failure has been detected.
               hiQHardwareInServiceTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.4
This event is used to clear a hardware-related alarm.
               hiQSystemSurvivalModeTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.5
The system is operating in survival mode.
       hiQLicensingFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.220
Events from software licensing event set LICENSING_EVT_SET_ID (220).
               hiQLicensesExceededTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.1
The number of assigned licenses has exceeded the number of activated licenses for the type identified by faultyObject.
               hiQLicenseCountOkTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.2
The number of assigned licenses is now within the limit allowed by the number of licenses activated for the type identified by faultyObject.
               hiQLicenseCountMismatchTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.3
The license count is different between the two nodes of the hiQ cluster for the type identified by faultyObject.
               hiQLicenseCountSyncTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.4
The license count is now the same between the two nodes of the hiQ cluster for the type identified by faultyObject.
               hiQLicenseSessionsTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.5
The number of license sessions exceeds the warning threshold for the type identified by faultyObject.
               hiQLicenseSessionCountOkTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.6
The number of license sessions is now below the warning threshold for the type identified by faultyObject.
               hiQLicenseRestoreTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.7
Restoring the system to a release older from the last more than or equal to 72 hours causes licensing enforcement resulting in licensing violations.
               hiQLicenseRestoreOkTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.8
Licensing in now properly working in the system, after it has been restored.
       hiQAccountMgmtFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.221
Events from account management event set ACCOUNT_EVT_SET_ID (221).
               hiQAccountInactiveTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.221.1
The specified login account has not been used recently and may be disabled in the future.
               hiQAccountDisabledTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.221.2
The specified login account has not been used recently and may be deleted in the future.
               hiQAccountDeletedTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.221.3
Alarms were previously reported, indicating that the specified account has been inactive and subsequently disabled. The account was still not used and has now been deleted.
       hiQSurvivalAuthorityObjects 1.3.6.1.4.1.4329.2.18.2.2.1.47.222
               hiQSurvivalTrapType 1.3.6.1.4.1.4329.2.18.2.2.1.47.222.1 integer read-only
An enumerated value indicating the trap type. Enumeration: 'requestcommtest': 2, 'takeover': 1.
               hiQSurvivalNodeName 1.3.6.1.4.1.4329.2.18.2.2.1.47.222.2 octet string read-only
Name of node reporting to survival authority.
               hiQSurvivalClusterName 1.3.6.1.4.1.4329.2.18.2.2.1.47.222.3 octet string read-only
Name of cluster reporting to survival authority.
               hiQSurvivalNodeIPAddress 1.3.6.1.4.1.4329.2.18.2.2.1.47.222.4 ipaddress read-only
IP address of node reporting to survival authority.
       hiQSurvivalAuthorityTraps 1.3.6.1.4.1.4329.2.18.2.2.1.47.223
Events for Survival Authority processing
               hiQPartnerNodeLeftClusterTrap 1.3.6.1.4.1.4329.2.18.2.2.1.47.223.1
Sent to the 'Survival Authority' to request a communication test or when a node cannot communicate with its partner, the 'Survival Authority' is requested to respond with an SNMP set command.
       hiQOmmMgmtFaultMgt 1.3.6.1.4.1.4329.2.18.2.2.1.47.230
Events from operational maintenance measurement event set OMM_EVT_SET_ID (230).
               hiQOmmBGCFCounterAboveHighThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.230.1
The event count has exceeded the alarm threshold for the type identified by faultyObject.
               hiQOmmBGCFCounterAboveLowThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.230.2
The event count has exceeded the alarm threshold for the type identified by faultyObject.
               hiQOmmBGCFCounterBelowThld 1.3.6.1.4.1.4329.2.18.2.2.1.47.230.3
The event count is below the threshold allowed for the type identified by faultyObject.