UPS2-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: UPS2-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, CTRON-MIB-NAMES

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 upsSystem 1.3.6.1.4.1.52.4.1.1.10.1
     upsNumUPSs 1.3.6.1.4.1.52.4.1.1.10.1.1 integer read-only
The number of UPSs available.
 upsId 1.3.6.1.4.1.52.4.1.1.10.2
     upsIdTable 1.3.6.1.4.1.52.4.1.1.10.2.1 no-access
A list of identification table entries. The number of entries is given by the value of upsNumUPSs.
         upsIdEntry 1.3.6.1.4.1.52.4.1.1.10.2.1.1 no-access
An entry containing objects for a particular UPS.
             upsIndex 1.3.6.1.4.1.52.4.1.1.10.2.1.1.1 integer read-only
A unique value which identifies a particular UPS.
             upsName 1.3.6.1.4.1.52.4.1.1.10.2.1.1.2 displaystring read-write
The UPS's name. A maximum of 8 characters may be specified. This object is initialized to the UPS's model name.
             upsModelType 1.3.6.1.4.1.52.4.1.1.10.2.1.1.3 integer read-only
The UPS's base model type. Enumeration: 'smartUps2000': 6, 'smartUps400': 2, 'matrixUps5000': 8, 'smartUps900': 4, 'matrixUps3000': 7, 'smartUps600': 3, 'smartUps1250': 5, 'other': 9, 'smartUps250': 1.
             upsFwVersion 1.3.6.1.4.1.52.4.1.1.10.2.1.1.4 displaystring read-only
The UPS's firmware version.
             upsSerialNumber 1.3.6.1.4.1.52.4.1.1.10.2.1.1.5 displaystring read-only
The UPS's serial number as set at the factory.
             upsManufDate 1.3.6.1.4.1.52.4.1.1.10.2.1.1.6 displaystring read-only
The UPS's date of manufacture in the format mm/dd/yy.
 upsBattery 1.3.6.1.4.1.52.4.1.1.10.3
     upsBatteryTable 1.3.6.1.4.1.52.4.1.1.10.3.1 no-access
A list of battery table entries. The number of entries is given by the value of upsNumUPSs.
         upsBatteryEntry 1.3.6.1.4.1.52.4.1.1.10.3.1.1 no-access
An entry containing objects for a particular UPS.
             upsBatteryCapacity 1.3.6.1.4.1.52.4.1.1.10.3.1.1.1 integer read-only
The UPS's remaining battery capacity expressed as a percent of the fully charged condition. The value of this object is the actual percentage * 10 (that is, to determine the actual percentage, divide the value of this object by 10).
             upsBatteryVoltage 1.3.6.1.4.1.52.4.1.1.10.3.1.1.2 integer read-only
The UPS's present battery voltage. The value of this object is the actual voltage * 100 (that is, to determine the actual voltage, divide the value of this object by 100).
             upsBatteryTest 1.3.6.1.4.1.52.4.1.1.10.3.1.1.3 integer read-write
This object may be written to initiate testing of the UPS's battery packs. Reading this object will always return a 0. Enumeration: 'initiateTest': 1.
             upsBatteryTestResult 1.3.6.1.4.1.52.4.1.1.10.3.1.1.4 integer read-only
The result of the last battery test performed. Enumeration: 'invalidTestDueToOverload': 4, 'noRecentTest': 3, 'batteryBad': 2, 'batteryOK': 1.
             upsRunTimeCalibration 1.3.6.1.4.1.52.4.1.1.10.3.1.1.5 integer read-write
This object may be written to initiate or terminate the test used to calibrate the returned run time value. This test will only run if battery capacity is 100%. Results of this test can be retrieved by upsEstimatedRunTimeRemaining. Valid values for writing are 1 (initiate test) and 2 (terminate test). In addition, this object may be read to determine whether the test is currently running. Valid values for reading are 3 (test is in progress) and 4 (test is not in progress). Enumeration: 'testInProgress': 3, 'performTest': 1, 'testNotInProgress': 4, 'abortTest': 2.
             upsEstimatedRunTimeRemaining 1.3.6.1.4.1.52.4.1.1.10.3.1.1.6 integer read-only
The UPS's estimated remaining run time in minutes. The UPS may be queried when operating in the on-line, bypass, or on-battery modes of operation. The run time estimate is based on available battery capacity and output load.
             upsTransferCause 1.3.6.1.4.1.52.4.1.1.10.3.1.1.7 integer read-only
The reason for the most recent transfer to on-battery operation. Enumeration: 'noTransfer': 1, 'inputHighVoltage': 5, 'selfTest': 2, 'inputLowVoltage': 4, 'inputLineFrequencyBad': 6, 'inputLineSpike': 3.
             upsBatteryTestTime 1.3.6.1.4.1.52.4.1.1.10.3.1.1.8 integer read-write
The frequency of execution of the UPS's automatic battery test. The test may be run immediately upon startup, upon startup and every 7 days thereafter, upon startup and every 14 days thereafter, or never. Enumeration: 'startupOnly': 3, 'off': 4, 'twoWeeks': 1, 'oneWeek': 2.
             upsLowBatteryWarning 1.3.6.1.4.1.52.4.1.1.10.3.1.1.9 integer read-write
The interval between activation of the UPS's low battery alarm warnings and shutdown of the UPS. Enumeration: 'fiveMinutes': 2, 'tenMinutes': 4, 'sevenMinutes': 3, 'twoMinutes': 1.
 upsInput 1.3.6.1.4.1.52.4.1.1.10.4
     upsInputTable 1.3.6.1.4.1.52.4.1.1.10.4.1 no-access
A list of input table entries. The number of entries is given by the value of upsNumUPSs.
         upsInputEntry 1.3.6.1.4.1.52.4.1.1.10.4.1.1 no-access
An entry containing objects for a particular UPS.
             upsInputUtilityVoltage 1.3.6.1.4.1.52.4.1.1.10.4.1.1.1 integer read-only
The UPS's utility voltage version. Enumeration: 'vac100': 1, 'vac208': 3, 'vac120': 2, 'vac220': 4.
             upsInputVoltage 1.3.6.1.4.1.52.4.1.1.10.4.1.1.2 integer read-only
The UPS's measured utility input voltage. The value of this object is the actual voltage * 10 (that is, to determine the actual voltage, divide the value of this object by 10).
             upsInputFailureSensitivity 1.3.6.1.4.1.52.4.1.1.10.4.1.1.3 integer read-write
The sensitivity of the UPS to rapid changes in utility voltage (e.g., blackouts, spikes, or notches) or abnormal changes in utility frequency. Enumeration: 'high': 1, 'auto': 4, 'medium': 2, 'low': 3.
             upsInputMaxVoltage 1.3.6.1.4.1.52.4.1.1.10.4.1.1.4 integer read-only
The UPS's maximum input voltage recorded since this object was last read. The value of this object is the actual voltage * 10 (that is, to determine the actual voltage, divide the value of this object by 10).
             upsInputMinVoltage 1.3.6.1.4.1.52.4.1.1.10.4.1.1.5 integer read-only
The UPS's minimum input voltage recorded since this object was last read. The value of this object is the actual voltage * 10 (that is, to determine the actual voltage, divide the value of this object by 10).
             upsInputFrequency 1.3.6.1.4.1.52.4.1.1.10.4.1.1.6 integer read-only
The UPS's present internal operating frequency in Hz. The value of this object is the actual frequency * 100 (that is, to determine the actual frequency, divide the value of this object by 100).
 upsOutput 1.3.6.1.4.1.52.4.1.1.10.5
     upsOutputTable 1.3.6.1.4.1.52.4.1.1.10.5.1 no-access
A list of output table entries. The number of entries is given by the value of upsNumUPSs.
         upsOutputEntry 1.3.6.1.4.1.52.4.1.1.10.5.1.1 no-access
An entry containing objects for a particular UPS.
             upsOutputVoltage 1.3.6.1.4.1.52.4.1.1.10.5.1.1.1 integer read-only
The measured UPS output voltage. The value of this object is the actual voltage * 10 (that is, to determine the actual voltage, divide the value of this object by 10).
             upsOutputUtilityVoltage 1.3.6.1.4.1.52.4.1.1.10.5.1.1.2 integer read-write
The UPS's current on-battery output voltage setting (valid for 220/230/240 Vac version UPSs only). For other version UPSs, reading this object will always return a 0 and writing this object will have no effect. Enumeration: 'vac225': 1, 'vac230': 2, 'vac220': 4, 'vac240': 3.
             upsOutputPower 1.3.6.1.4.1.52.4.1.1.10.5.1.1.3 integer read-only
The UPS's output load represented as a percentage of full rated load in Watts. The value of this object is the actual percentage * 10 (that is, to determine the actual percentage, divide the value of this object by 10).
 upsStatus 1.3.6.1.4.1.52.4.1.1.10.6
     upsStatusTable 1.3.6.1.4.1.52.4.1.1.10.6.1 no-access
A list of status table entries. The number of entries is given by the value of upsNumUPSs.
         upsStatusEntry 1.3.6.1.4.1.52.4.1.1.10.6.1.1 no-access
An entry containing objects for a particular UPS.
             upsStatusOperational 1.3.6.1.4.1.52.4.1.1.10.6.1.1.1 integer read-only
This object contains 8 bits of information about the current operational status of the UPS. The bits are encoded as follows: BIT 7: 1=replace battery condition BIT 6: 1=low battery condition BIT 5: 1=overloaded output condition BIT 4: 1=on-battery mode of operation BIT 3: 1=on-line mode of operation BIT 2: 1=Smart Boost mode of operation (where applicable) BIT 1: 1=UPS shut down due to low battery, overload, or `sleep' mode BIT 0: 1=run time calibration running Note that bit 0 is the low-order bit.
             upsStatusFault 1.3.6.1.4.1.52.4.1.1.10.6.1.1.2 integer read-only
This object contains 8 bits of information about the current fault conditions of the UPS. The bits are encoded as follows: BIT 7: 1=UPS fault - internal temperature has exceeded nominal limits BIT 6: 1=UPS fault - bypass relay (where applicable) malfunction BIT 5: 1=UPS fault - battery charger failure BIT 4: 1=UPS in shut down mode via `S' command BIT 3: 1=UPS in `sleep' mode via `@ddd' command BIT 2: 1=UPS fault - main relay malfunction BIT 1: 1=UPS unable to transfer to on-battery operation due to overload BIT 0: 1=UPS's output unpowered due to low battery shut down Note that bit 0 is the low-order bit.
             upsStatusTemp 1.3.6.1.4.1.52.4.1.1.10.6.1.1.3 integer read-only
The UPS's present internal operating temperature in degrees Fahrenheit. The value of this object is the actual temperature * 10 (that is, to determine the actual temperature, divide the value of this object by 10).
 upsConfig 1.3.6.1.4.1.52.4.1.1.10.7
     upsConfigTable 1.3.6.1.4.1.52.4.1.1.10.7.1 no-access
A list of configuration table entries. The number of entries is given by the value of upsNumUPSs.
         upsConfigEntry 1.3.6.1.4.1.52.4.1.1.10.7.1.1 no-access
An entry containing objects for a particular UPS.
             upsConfigAlarm 1.3.6.1.4.1.52.4.1.1.10.7.1.1.1 integer read-write
The UPS's current audible alarm setting. The alarm may be set to activate immediately upon utility failure and for low battery condition, to activate 30 seconds after utility failure and immediately upon low battery condition, to activate upon low battery condition only, or to not activate under any conditions. Enumeration: 'thirtySecondsAfterUtilityFailure': 2, 'noAudibleAlarm': 4, 'uponUtilityFailure': 1, 'lowBatteryOnly': 3.
             upsConfigRestoreDefaults 1.3.6.1.4.1.52.4.1.1.10.7.1.1.2 integer read-write
This object may be written to force the UPS to restore the factory default settings for most of the UPS's customizable parameters. Reading this object will always return a 0. Enumeration: 'restoreDefaults': 1.
 upsExtMeas 1.3.6.1.4.1.52.4.1.1.10.8
     upsExtMeasTable 1.3.6.1.4.1.52.4.1.1.10.8.1 no-access
A list of external measurement table entries. The number of entries is the number of available UPSs to which External Measurement Units are attached.
         upsExtMeasEntry 1.3.6.1.4.1.52.4.1.1.10.8.1.1 no-access
An entry containing objects for a particular UPS.
             upsExtMeasFwVersion 1.3.6.1.4.1.52.4.1.1.10.8.1.1.1 displaystring read-only
The External Measurement Unit's firmware version letter.
             upsExtMeasTemp 1.3.6.1.4.1.52.4.1.1.10.8.1.1.2 integer read-only
The local ambient temperature in degrees Fahrenheit as measured by the External Measurement Unit. The value of this object is the actual temperature * 100 (that is, to determine the actual temperature, divide the value of this object by 100).
             upsExtMeasHumidity 1.3.6.1.4.1.52.4.1.1.10.8.1.1.3 integer read-only
The local ambient relative humidity in percent as measured by the External Measurement Unit. The value of this object is the actual humidity * 10 (that is, to determine the actual humidity, divide the value of this object by 10).
             upsExtMeasAlarmStatus 1.3.6.1.4.1.52.4.1.1.10.8.1.1.4 integer read-only
This object contains 8 bits of information about the current alarm status of the External Measurement Unit. The bits are encoded as follows: BIT 7: 1=Upper temperature limit exceeded BIT 6: 1=Lower temperature limit exceeded BIT 5: 1=Upper relative humidity limit exceeded BIT 4: 1=Lower relative humidity limit exceeded BIT 3: 1=Contact input channel #4 alarm state BIT 2: 1=Contact input channel #3 alarm state BIT 1: 1=Contact input channel #2 alarm state BIT 0: 1=Contact input channel #1 alarm state Note that bit 0 is the low-order bit.
             upsExtMeasMaxTemp 1.3.6.1.4.1.52.4.1.1.10.8.1.1.5 integer read-write
The upper temperature limit at which an alarm will be sent. Enumeration: 'ninetyDegreesF': 1, 'oneHundredSeventyFiveDegreesF': 4, 'oneHundredFifteenDegreesF': 2, 'oneHundredThirtyDegreesF': 3.
             upsExtMeasMinTemp 1.3.6.1.4.1.52.4.1.1.10.8.1.1.6 integer read-write
The lower temperature limit at which an alarm will be sent. Enumeration: 'fortyDegreesF': 1, 'fiftyDegreesF': 2, 'fiftyEightDegreesF': 3, 'sixtyFiveDegreesF': 4.
             upsExtMeasMaxHumidity 1.3.6.1.4.1.52.4.1.1.10.8.1.1.7 integer read-write
The upper humidity limit at which an alarm will be sent. Enumeration: 'eightyPercent': 2, 'ninetyPercent': 4, 'seventyPercent': 1, 'eightyFivePercent': 3.
             upsExtMeasMinHumidity 1.3.6.1.4.1.52.4.1.1.10.8.1.1.8 integer read-write
The lower humidity limit at which an alarm will be sent. Enumeration: 'twentyPercent': 2, 'thirtyPercent': 3, 'tenPercent': 1, 'fortyPercent': 4.
             upsExtMeasContact1AlarmControl 1.3.6.1.4.1.52.4.1.1.10.8.1.1.9 integer read-write
The alarm enable state for the External Measurement Unit's contact input channel #1. If enabled, an alarm will be sent when contact input channel #1 has changed to abnormal state. Enumeration: 'enable': 1, 'disable': 2.
             upsExtMeasContact2AlarmControl 1.3.6.1.4.1.52.4.1.1.10.8.1.1.10 integer read-write
The alarm enable state for the External Measurement Unit's contact input channel #2. If enabled, an alarm will be sent when contact input channel #2 has changed to abnormal state. Enumeration: 'enable': 1, 'disable': 2.
             upsExtMeasContact3AlarmControl 1.3.6.1.4.1.52.4.1.1.10.8.1.1.11 integer read-write
The alarm enable state for the External Measurement Unit's contact input channel #3. If enabled, an alarm will be sent when contact input channel #3 has changed to abnormal state. Enumeration: 'enable': 1, 'disable': 2.
             upsExtMeasContact4AlarmControl 1.3.6.1.4.1.52.4.1.1.10.8.1.1.12 integer read-write
The alarm enable state for the External Measurement Unit's contact input channel #4. If enabled, an alarm will be sent when contact input channel #4 has changed to abnormal state. Enumeration: 'enable': 1, 'disable': 2.
             upsExtMeasMaxTempAlarmControl 1.3.6.1.4.1.52.4.1.1.10.8.1.1.13 integer read-write
The alarm enable state for the External Measurement Unit's upper temperature limit. If enabled, an alarm will be sent when the ambient temperature rises above the upper temperature limit. Enumeration: 'enable': 1, 'disable': 2.
             upsExtMeasMinTempAlarmControl 1.3.6.1.4.1.52.4.1.1.10.8.1.1.14 integer read-write
The alarm enable state for the External Measurement Unit's lower temperature limit. If enabled, an alarm will be sent when the ambient temperature falls below the lower temperature limit. Enumeration: 'enable': 1, 'disable': 2.
             upsExtMeasMaxHumidityAlarmControl 1.3.6.1.4.1.52.4.1.1.10.8.1.1.15 integer read-write
The alarm enable state for the External Measurement Unit's upper humidity limit. If enabled, an alarm will be sent when the ambient relative humidity rises above the upper humidity limit. Enumeration: 'enable': 1, 'disable': 2.
             upsExtMeasMinHumidityAlarmControl 1.3.6.1.4.1.52.4.1.1.10.8.1.1.16 integer read-write
The alarm enable state for the External Measurement Unit's lower humidity limit. If enabled, an alarm will be sent when the ambient relative humidity falls below the lower humidity limit. Enumeration: 'enable': 1, 'disable': 2.
 upsAddlFuncs 1.3.6.1.4.1.52.4.1.1.10.9
     upsAddlFuncsTable 1.3.6.1.4.1.52.4.1.1.10.9.1 no-access
A list of additional functions table entries. The number of entries is the number of available UPSs which are capable of supporting these additional functions.
         upsAddlFuncsEntry 1.3.6.1.4.1.52.4.1.1.10.9.1.1 no-access
An entry containing objects for a particular UPS.
             upsAddlFuncsNumBatteryPacks 1.3.6.1.4.1.52.4.1.1.10.9.1.1.1 integer read-only
The number of battery pack units connected to the UPS.
             upsAddlFuncsNumBadBatteryPacks 1.3.6.1.4.1.52.4.1.1.10.9.1.1.2 integer read-only
The number of bad (faulty) battery pack units connected to the UPS.
             upsAddlFuncsOutputCurrent 1.3.6.1.4.1.52.4.1.1.10.9.1.1.3 integer read-only
The true rms load current drawn from the UPS. The value of this object is the actual amperage * 100 (that is, to determine the actual amperage, divide the value of this object by 100).
             upsAddlFuncsOutputApparentPower 1.3.6.1.4.1.52.4.1.1.10.9.1.1.4 integer read-only
The UPS's output load represented as a percentage of full rated load in Volt-Amps. The value of this object is the actual percentage * 10 (that is, to determine the actual percentage, divide the value of this object by 10).
             upsAddlFuncsStatusOperational 1.3.6.1.4.1.52.4.1.1.10.9.1.1.5 integer read-only
This object contains 8 bits of information about the current operational status of the UPS. The bits are encoded as follows: BIT 7: 1=UPS ready to power load upon return of normal line or upon user command BIT 6: 1=UPS ready to power load upon user command BIT 5: 1=UPS in bypass mode as a result of manual bypass control BIT 4: 1=UPS is returning from bypass mode BIT 3: 1=UPS in bypass mode as a result of UPS-Link or key command BIT 2: 1=UPS going to bypass mode as a result of UPS-Link or key command BIT 1: 1=not defined BIT 0: 1=wakeup mode - startup test lasting < 2 sec Note that bit 0 is the low-order bit.
             upsAddlFuncsStatusFault 1.3.6.1.4.1.52.4.1.1.10.9.1.1.6 integer read-only
This object contains 8 bits of information about the current fault conditions of the UPS. The bits are encoded as follows: BIT 7: reserved for future use BIT 6: reserved for future use BIT 5: reserved for future use BIT 4: 1=UPS fault - DC imbalance, UPS in bypass BIT 3: 1=UPS fault - output voltage select failure, UPS in bypass BIT 2: 1=UPS fault - bypass supply failure BIT 1: 1=UPS fault - Isolation Unit fan failure BIT 0: 1=UPS fault - Electronics Unit fan failure, UPS in bypass Note that bit 0 is the low-order bit.
             upsAddlFuncsConfigPassword 1.3.6.1.4.1.52.4.1.1.10.9.1.1.7 octet string read-write
The password that controls access to the UPS's LCD display. A maximum of 4 characters may be entered.
             upsAddlFuncsConfigDisable 1.3.6.1.4.1.52.4.1.1.10.9.1.1.8 integer read-write
This object may be written to immediately shut down the UPS, requiring a manual reset. Reading this object will always return a 0. Enumeration: 'disableUps': 1.
             upsAddlFuncsConfigBypass 1.3.6.1.4.1.52.4.1.1.10.9.1.1.9 integer read-write
This object may be written to cause the UPS to transfer to or from the bypass mode. Reading this object will always return a 0. Enumeration: 'bypassMode': 1, 'exitBypassMode': 2.