UBQS-LAG-MIB: View SNMP OID List / Download MIB
VENDOR: PREMIER NETWORK CO., LTD
Home | MIB: UBQS-LAG-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
ubiLagMIB | 1.3.6.1.4.1.7800.100.16 |
Link Aggregation MIB module for managing 802.3ad |
||
ubiLagMIBNotificationsPrefix | 1.3.6.1.4.1.7800.100.16.0 | |||
ubiBackupIntfMIBNotifications | 1.3.6.1.4.1.7800.100.16.0.1 | |||
ubiBackupIntfSwitchover | 1.3.6.1.4.1.7800.100.16.0.1.1 |
Backup Interface Switchover Notifiaction |
||
ubiLagMIBObjects | 1.3.6.1.4.1.7800.100.16.1 | |||
ubiAgg | 1.3.6.1.4.1.7800.100.16.1.1 | |||
ubiAggTable | 1.3.6.1.4.1.7800.100.16.1.1.1 | no-access |
A table that contains the generic aggregation information. |
|
1.3.6.1.4.1.7800.100.16.1.1.1.1 | no-access |
A list of information for each aggregation. |
||
ubiAggId | 1.3.6.1.4.1.7800.100.16.1.1.1.1.1 | integer32 | read-only |
Aggregation ID |
ubiAggDelete | 1.3.6.1.4.1.7800.100.16.1.1.1.1.2 | integer | read-write |
Remove the particular aggregation. If it is success to remove the entry, the corresponding port information is deleted from ubiAggPortTable. Enumeration: 'none': 0, 'set': 1. |
ubiAggPortTable | 1.3.6.1.4.1.7800.100.16.1.1.2 | no-access |
A table that contains the aggregation port information. |
|
1.3.6.1.4.1.7800.100.16.1.1.2.1 | no-access |
A list of information for each aggregation port. |
||
ubiAggPortAggMode | 1.3.6.1.4.1.7800.100.16.1.1.2.1.1 | integer | read-only |
The mode of aggregation that needed to create the particular aggregation and set the aggregation port. Enumeration: 'active': 4, 'on': 2, 'other': 1, 'off': 3, 'passive': 5. |
ubiAggPortRowStatus | 1.3.6.1.4.1.7800.100.16.1.1.2.1.2 | rowstatus | read-only |
The status of aggregation row. The createAndGo(4)can create the aggregation and set the particular port to that aggregation. The destroy(6) can unset the particular port from the aggregation. If you want to remove the aggregation, set ubiAggDelete. |
ubiLagLoadBalanceTable | 1.3.6.1.4.1.7800.100.16.1.1.3 | no-access |
A table that contains the aggregation load-balance information. |
|
1.3.6.1.4.1.7800.100.16.1.1.3.1 | no-access |
A list of information for aggregation load-balance. |
||
ubiLagLoadBalanceAggId | 1.3.6.1.4.1.7800.100.16.1.1.3.1.1 | integer | no-access |
This object consists of two cases. First case is '0' that means global configuration. In this case, all ports inside a switch are affected by load-balance configured globally. Second case is '1-256' that means aggregator id. In this case, load-balance configuration affects particular port only. Two case couldn't be used together. |
ubiLagLoadBalanceMode | 1.3.6.1.4.1.7800.100.16.1.1.3.1.2 | ubilaglist | read-write |
The mode of port-group load-balance |
ubiRedundancyPort | 1.3.6.1.4.1.7800.100.16.1.2 | |||
ubiRedundancyPortTable | 1.3.6.1.4.1.7800.100.16.1.2.1 | no-access |
A table that contains the redundancy port information. |
|
1.3.6.1.4.1.7800.100.16.1.2.1.1 | no-access |
A list of information for redundancy prot. |
||
ubiReduIfIndex | 1.3.6.1.4.1.7800.100.16.1.2.1.1.1 | interfaceindex | read-only |
Ifindex of Backup Interface |
ubiReduBackupIfIndex | 1.3.6.1.4.1.7800.100.16.1.2.1.1.2 | interfaceindex | read-write |
Backup Interce Ifindex |
ubiReduIfName | 1.3.6.1.4.1.7800.100.16.1.2.1.1.3 | displaystring | read-only |
interface name of Backup Interface |
ubiReduLink | 1.3.6.1.4.1.7800.100.16.1.2.1.1.4 | integer | read-only |
Link of Backup interface 1 : up 2 : down |
ubiReduMode | 1.3.6.1.4.1.7800.100.16.1.2.1.1.5 | integer | read-only |
mode of backup interface 0 : none 1 : primary 2 : secondary |
ubiReduRvt | 1.3.6.1.4.1.7800.100.16.1.2.1.1.6 | integer | read-only |
revert mode of backup interface 0 : Off 1 : On |
ubiReduBackupIf | 1.3.6.1.4.1.7800.100.16.1.2.1.1.7 | displaystring | read-only |
backup interface name of backup interface |
ubiReduStatus | 1.3.6.1.4.1.7800.100.16.1.2.1.1.8 | integer | read-only |
state of backup interface 0 : none 1 : normal operation 2 : backup mode 3 : wait to backup 4 : wait to revert 5 : both down 6 : disable |
ubiReduWtr | 1.3.6.1.4.1.7800.100.16.1.2.1.1.9 | integer | read-write |
Wtr of backup interface 1..720 : Set 0 : Unset |
ubiReduHoldoff | 1.3.6.1.4.1.7800.100.16.1.2.1.1.10 | integer | read-write |
Holdoff of backup interface 1..10 : Set 0 : Unset |
ubiReduRowStatus | 1.3.6.1.4.1.7800.100.16.1.2.1.1.11 | rowstatus | read-only |
The status of backup interface row. The createAndGo(4)can create the backup interface and set the particular port to that backup interface. The destroy(6) can unset the particular port from the backup interface. If you want to remove the backup interface, set backup interface Delete. |
ubiLagMIBConformance | 1.3.6.1.4.1.7800.100.16.2 | |||
ubiLagMIBCompliances | 1.3.6.1.4.1.7800.100.16.2.1 | |||
ubiLagMIBCompliance | 1.3.6.1.4.1.7800.100.16.2.1.1 |
The compliance statement for Lag implementations. |
||
ubiLagMIBGroups | 1.3.6.1.4.1.7800.100.16.2.2 | |||
ubiAggGroup | 1.3.6.1.4.1.7800.100.16.2.2.1 |
A collection of objects that provide aggregation creation or deletion. |