TROPIC-ASON-MIB: View SNMP OID List / Download MIB

VENDOR: NOKIA


 Home MIB: TROPIC-ASON-MIB
Download as:   
SNMPv2-CONF, IF-MIB, TROPIC-GLOBAL-REG, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, TROPIC-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     tnAsonMibModule 1.3.6.1.4.1.7483.1.1.2.1.10
ASON MIB types.
 tnAsonConf 1.3.6.1.4.1.7483.2.1.9.1
     tnAsonGroups 1.3.6.1.4.1.7483.2.1.9.1.1
         tnAsonGlobalGroup 1.3.6.1.4.1.7483.2.1.9.1.1.1
         tnAsonIorGlobalGroup 1.3.6.1.4.1.7483.2.1.9.1.1.2
         tnAsonOmsLineImpScalarsGroup 1.3.6.1.4.1.7483.2.1.9.1.1.3
         tnAsonOmsLineImpGroup 1.3.6.1.4.1.7483.2.1.9.1.1.4
         tnAsonOptLineImpScalarsGroup 1.3.6.1.4.1.7483.2.1.9.1.1.5
         tnAsonOptLineImpGroup 1.3.6.1.4.1.7483.2.1.9.1.1.6
         tnAsonTopoAlarmScalarsGroup 1.3.6.1.4.1.7483.2.1.9.1.1.7
         tnAsonTopoAlarmGroup 1.3.6.1.4.1.7483.2.1.9.1.1.8
         tnAsonFeasibilityGroup 1.3.6.1.4.1.7483.2.1.9.1.1.9
         tnAsonMgracdScalarsGroup 1.3.6.1.4.1.7483.2.1.9.1.1.10
         tnAsonMgracdGroup 1.3.6.1.4.1.7483.2.1.9.1.1.11
         tnAsonOmsWavelengthSetScalarsGroup 1.3.6.1.4.1.7483.2.1.9.1.1.12
         tnAsonOmsWavelengthSetGroup 1.3.6.1.4.1.7483.2.1.9.1.1.13
         tnAsonSnapshotScalarsGroup 1.3.6.1.4.1.7483.2.1.9.1.1.14
         tnAsonSnapshotGroup 1.3.6.1.4.1.7483.2.1.9.1.1.15
     tnAsonCompliances 1.3.6.1.4.1.7483.2.1.9.1.2
         tnAsonCompliance 1.3.6.1.4.1.7483.2.1.9.1.2.1
 tnAsonObjs 1.3.6.1.4.1.7483.2.1.9.2
     tnAsonGlobal 1.3.6.1.4.1.7483.2.1.9.2.1
         tnGmreNodeIpAddr 1.3.6.1.4.1.7483.2.1.9.2.1.1 ipaddress read-only
This address is used for all GMPLS communication protocols across the network.
         tnGmreNodeSubMask 1.3.6.1.4.1.7483.2.1.9.2.1.2 ipaddress read-only
Subnet mask for tnGmreNodeIpAddr.
         tnGmreNotifyIpAddr 1.3.6.1.4.1.7483.2.1.9.2.1.3 ipaddress read-only
This address is used by RSVP-TE for fast failure notify message within the network.
         tnGmreNotifySubMask 1.3.6.1.4.1.7483.2.1.9.2.1.4 ipaddress read-only
Subnet mask for tnGmreNotifyIpAddr.
     tnAsonIorGlobal 1.3.6.1.4.1.7483.2.1.9.2.2
         tnGmreCorbaName 1.3.6.1.4.1.7483.2.1.9.2.2.1 snmpadminstring read-only
GMRE CORBA IOR Name: 1 to 64 alphaNumeric characters.
         tnGmreCorbaHostIpAddress 1.3.6.1.4.1.7483.2.1.9.2.2.2 ipaddress read-only
GMRE CORBA Host IP Address. Current range: {1-254}:{0-255}:{0-255}:{1-254}.
         tnGmreCorbaIor 1.3.6.1.4.1.7483.2.1.9.2.2.3 snmpadminstring read-only
GMRE CORBA Interoperable Object Reference (IOR). It contains 1 to 265 characters and provides initial reference for the CORBA connection over IIOP protocol.
     tnAsonOmsLineImp 1.3.6.1.4.1.7483.2.1.9.2.3
         tnGmreOmsLineImpAttributeTotal 1.3.6.1.4.1.7483.2.1.9.2.3.1 integer32 read-only
         tnGmreOmsLineImpTable 1.3.6.1.4.1.7483.2.1.9.2.3.2 no-access
             tnGmreOmsLineImpEntry 1.3.6.1.4.1.7483.2.1.9.2.3.2.1 no-access
                 tnGmreOmsLineImpMaxAlwCh 1.3.6.1.4.1.7483.2.1.9.2.3.2.1.1 unsigned32 read-only
GMRE OMS maximum allowed channels (MAXALCH). Current configurable range: 1 to 96.
                 tnGmreOmsLineImpPMD 1.3.6.1.4.1.7483.2.1.9.2.3.2.1.2 unsigned32 read-only
GMRE OMS polarization mode dispersion (PMD). The valid value is 0.0 to 1000.0 pico-seconds with precision of one decimal digit. Current configurable range: 0 to 10000.
                 tnGmreOmsLineImpAlcMode 1.3.6.1.4.1.7483.2.1.9.2.3.2.1.3 integer read-only
An indication as to whether or not the GMRE OMS Automatic Level Control (ALC) Mode is on or not. Equivalent to LNS (Laser Network Stabilization) Mode. Enumeration: 'on': 1, 'off': 2.
                 tnGmreOmsLineImpDcuFree 1.3.6.1.4.1.7483.2.1.9.2.3.2.1.4 integer read-only
GMRE OMS Dispersion Compensation Unit (DCU) is DCM Free or not. Enumeration: 'yes': 1, 'no': 2.
                 tnGmreOmsLineImpCD 1.3.6.1.4.1.7483.2.1.9.2.3.2.1.5 integer32 read-only
GMRE OMS chromatic dispersion (CD). The new coherent feasibility model is in units of 1/10 ps/nm (picoseconds/nanometer) because it needs to have precision of one decimal digit. The valid values are -4000.0 to 7800.0 ps/nm. Current configurable range: -40000 to 78000.
                 tnGmreOmsLineImpFiberType 1.3.6.1.4.1.7483.2.1.9.2.3.2.1.6 integer read-only
GMRE OMS span fiber type. Enumeration: 'twc': 4, 'eleaf': 2, 'twrs': 3, 'twp': 5, 'mixed': 6, 'ssmf': 1.
                 tnGmreOmsLineImpPDL 1.3.6.1.4.1.7483.2.1.9.2.3.2.1.7 unsigned32 read-only
GMRE OMS polarization dependent loss (PDL). The valid value is 0.00000 to 5.00000 dB with precision of five decimal digit. Current configurable range: 0 to 500000.
     tnAsonOptLineImp 1.3.6.1.4.1.7483.2.1.9.2.4
         tnGmreOptLineImpAttributeTotal 1.3.6.1.4.1.7483.2.1.9.2.4.1 integer32 read-only
         tnGmreOptLineImpTable 1.3.6.1.4.1.7483.2.1.9.2.4.2 no-access
             tnGmreOptLineImpEntry 1.3.6.1.4.1.7483.2.1.9.2.4.2.1 no-access
On creation of TnGmreOptLineImpEntry, the user must fully specify all members before entry will be processed.
                 tnGmreOptLineImpIndex 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.1 unsigned32 no-access
GMRE Optical Line Impairment table entry index. Each index must identify a unique combination of BitRate, Encoding, CompModule, and FecMode. Current configurable range: 1 to 255.
                 tnGmreOptLineImpBitRate 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.2 integer read-only
GMRE Optical Line transmitted signal bit rate. Enumeration: 'rate260G': 5, 'rate100G': 4, 'rate50G': 6, 'rate250G': 8, 'rate40G': 3, 'rate2G5': 1, 'rate10G': 2, 'rate400G': 9, 'rate200G': 7.
                 tnGmreOptLineImpEncoding 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.3 integer read-only
GMRE optical line encoding or modulation. Enumeration: 'cohpmqpsk': 5, 'cohpm16qam': 7, 'icohpmqpsk': 6, 'pdpsk': 2, 'cohpm64qam': 10, 'nrz': 1, 'cohpmbpsk': 4, 'cohspqpsk': 9, 'dpsk': 3, 'cohpm8qam': 8.
                 tnGmreOptLineImpCompModule 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.4 integer read-only
GMRE Optical Line Compensation Module (on the OCH transponder line side). Enumeration: 'add2lh': 24, 'variant10': 16, 'add2l': 23, 'hperf1': 6, 'hperf2': 21, 'variant9': 15, 'variant8': 14, 'variant1': 7, 'cr': 18, 'variant3': 9, 'null': 1, 'variant5': 11, 'variant4': 10, 'pmdc': 2, 'variant6': 12, 'ovclk': 25, 'variant2': 8, 'variant7': 13, 'mlse': 3, 'tdcm': 4, 'ctxfpwt': 19, 'add3': 22, 'tcfp': 17, 'txfp': 5, 'sperf2': 20, 'cm2ac100': 26.
                 tnGmreOptLineImpFecMode 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.5 aluwdmfecmode read-only
GMRE Optical Line Forward Error Correction (FEC) mode.
                 tnGmreOptLineImpNLP 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.6 unsigned32 read-only
GMRE OPTLINE Non-Linear Phase (NLP). The valid value is 0.00000 to 999.00000 with precision of 5 decimal digits. Current configurable range: 0 to 99900000.
                 tnGmreOptLineImpOSNR 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.7 unsigned32 read-only
GMRE OPTLINE Optical Signal-To-Noise (OSNR) Power Ratio. The valid value is 0.00000 to 10000.00000 with precision of 5 decimal digits. Current configurable range: 0 to 1000000000. Note: The OSNR value derived from the MIB value (after dividing by 100000) is the linear inverse of the real value in dB. To convert the MIB value to a value in dB, use 10 * log(MIBvalue/100000), e.g., 10 * log(100000000/100000 ) = 30 dB.
                 tnGmreOptLineImpNLPNP 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.8 unsigned32 read-only
GMRE OPTLINE Non-Linear Phase Negative-Positive (NLPNP). The valid value is 0.00000 to 999.00000 with precision of 5 decimal digits. Current configurable range: 0 to 99900000.
                 tnGmreOptLineImpOSNRNP 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.9 unsigned32 read-only
GMRE OPTLINE Optical Signal-To-Noise Negative- Positive (OSNRNP) Power Ratio. The valid value is 0.00000 to 10000.00000 with precision of 5 decimal digits. Current configurable range: 0 to 1000000000. Note: The OSNR value derived from the MIB value (after dividing by 100000) is the linear inverse of the real value in dB. To convert the MIB value to a value in dB, use 10 * log(MIBvalue/100000), e.g., 10 * log(100000000/100000) = 30 dB.
                 tnGmreOptLineImpRowStatus 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.10 rowstatus read-only
Row Status of Optical Line Impairment entry. Supported values are active, createAndGo, and destroy.
                 tnGmreOptLineImpPower 1.3.6.1.4.1.7483.2.1.9.2.4.2.1.11 unsigned32 read-only
GMRE OPTLINE Power. The valid values are 0 to 40.50 milli-Watts and the default is 0.79 milli-Watt. Current configurable range: 0 to 40500.
     tnAsonTopoAlarm 1.3.6.1.4.1.7483.2.1.9.2.5
         tnAsonTopoAlarmAttributeTotal 1.3.6.1.4.1.7483.2.1.9.2.5.1 integer32 read-only
         tnAsonTopoAlarmTable 1.3.6.1.4.1.7483.2.1.9.2.5.2 no-access
             tnAsonTopoAlarmEntry 1.3.6.1.4.1.7483.2.1.9.2.5.2.1 no-access
                 tnAsonTopoClearAlarm 1.3.6.1.4.1.7483.2.1.9.2.5.2.1.1 tncommand read-only
Clears ASON topology connectivity alarm.
     tnAsonFeasibility 1.3.6.1.4.1.7483.2.1.9.2.6
         tnAsonFeasibilityCommand 1.3.6.1.4.1.7483.2.1.9.2.6.1 integer read-write
This attribute is used to start the feasibility file transfer. Enumeration: 'noCmd': 1, 'transferFromRemote': 2.
         tnAsonFeasibilityRemoteHostIp 1.3.6.1.4.1.7483.2.1.9.2.6.2 ipaddress read-write
This attribute is used for the ip address of the remote server where the feasibility file resides.
         tnAsonFeasibilityRemotePath 1.3.6.1.4.1.7483.2.1.9.2.6.3 snmpadminstring read-write
This attribute is used for the path and filename on the remote server to indicate which feasibility file to transfer.
         tnAsonFeasibilityStatus 1.3.6.1.4.1.7483.2.1.9.2.6.4 snmpadminstring read-only
This attribute indicates the status of the previously executed tnAsonFeasibilityCommand operation. Here are the status strings: * Success * Remote transfer in progress * Failed - Remote path exceeds the max length of 127 characters * Failed - The remote path must specify a file * Failed - Cannot transfer file while operation already in progress * Failed - Invalid protocol (only tftp or sftp is allowed) * Failed - Local error * Failed - Network error * Failed - Remote server error * Failed - Invalid remote server IP address * Failed - Unknown Error * Failed - Authorization failed * Failed - File permission(s) failed * Failed - .
         tnAsonFeasibilityLastTransferredVersion 1.3.6.1.4.1.7483.2.1.9.2.6.5 snmpadminstring read-only
This attribute indicates the version of the feasibility file that was last transferred successfully.
         tnAsonFeasibilityProtocol 1.3.6.1.4.1.7483.2.1.9.2.6.6 aluwdmtransferprotocol read-write
This attributes indicates the feasibility file transfer protocol.
         tnAsonFeasibilityUserId 1.3.6.1.4.1.7483.2.1.9.2.6.7 snmpadminstring read-write
The userId used to access the feasibility file transfer server.
         tnAsonFeasibilityPassword 1.3.6.1.4.1.7483.2.1.9.2.6.8 snmpadminstring read-write
The password used to access the feasibility file transfer server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.
     tnAsonMgracdInfo 1.3.6.1.4.1.7483.2.1.9.2.7
         tnAsonMgracdAttributeTotal 1.3.6.1.4.1.7483.2.1.9.2.7.1 integer32 read-only
         tnAsonMgracdTable 1.3.6.1.4.1.7483.2.1.9.2.7.2 no-access
             tnAsonMgracdEntry 1.3.6.1.4.1.7483.2.1.9.2.7.2.1 no-access
                 tnAsonOchMgracd 1.3.6.1.4.1.7483.2.1.9.2.7.2.1.1 aluwdmaccesscontroldevice read-only
This attribute indicates ownership of the OCH entity.
                 tnAsonOmsochifMgracd 1.3.6.1.4.1.7483.2.1.9.2.7.2.1.2 aluwdmaccesscontroldevice read-only
This attribute indicates ownership of the OMSOCHIF entity.
                 tnAsonOtsMgracd 1.3.6.1.4.1.7483.2.1.9.2.7.2.1.3 aluwdmaccesscontroldevice read-only
This attribute indicates ownership of the OTS entity.
     tnAsonOmsWavelengthSet 1.3.6.1.4.1.7483.2.1.9.2.8
         tnGmreOmsWavelengthSetAttributeTotal 1.3.6.1.4.1.7483.2.1.9.2.8.1 integer32 read-only
         tnGmreOmsWavelengthSetTable 1.3.6.1.4.1.7483.2.1.9.2.8.2 no-access
             tnGmreOmsWavelengthSetEntry 1.3.6.1.4.1.7483.2.1.9.2.8.2.1 no-access
                 tnGmreOmsWavelengthEncodingType 1.3.6.1.4.1.7483.2.1.9.2.8.2.1.1 integer no-access
GMRE OMS line encoding type for Wavelengths/channels. Enumeration: 'nrz': 1, 'coherent': 3, 'pdpsk': 2.
                 tnGmreOmsWavelengthEncodingBitMap 1.3.6.1.4.1.7483.2.1.9.2.8.2.1.2 octet string read-only
This attribute provides the wavelengths/channels for encoding types on an OMS line. It is a fixed size octet string. Each bit represents an ITU channel. The ITU channel numbers decrement from the MSB of the first octet, 60.5, 60, 59.5, ..., 18, 17.5, 17. Currently we support 88 channels, requiring 88 bits, or 11 characters, to represent the ITU channels. 0 = ITU channel is not part of specified encoding type 1 = ITU channel is part of the specified encoding type.
     tnAsonSnapshot 1.3.6.1.4.1.7483.2.1.9.2.9
         tnAsonSnapshotRemoteHostIp 1.3.6.1.4.1.7483.2.1.9.2.9.1 ipaddress read-write
         tnAsonSnapshotProtocol 1.3.6.1.4.1.7483.2.1.9.2.9.2 aluwdmtransferprotocol read-write
This attributes indicates the snapshot protocol.
         tnAsonSnapshotUserId 1.3.6.1.4.1.7483.2.1.9.2.9.3 snmpadminstring read-write
The userId used to access the snapshot server.
         tnAsonSnapshotPassword 1.3.6.1.4.1.7483.2.1.9.2.9.4 snmpadminstring read-write
The password used to access the snapshot server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.
         tnAsonSnapshotRootRemotePath 1.3.6.1.4.1.7483.2.1.9.2.9.5 snmpadminstring read-write
Defines the root directory on the server the snapshot shall be stored. Must be present when row status of snapshot entries is created. Default is empty string.
         tnAsonSnapshotAttributeTotal 1.3.6.1.4.1.7483.2.1.9.2.9.6 integer32 read-only
         tnAsonSnapshotTable 1.3.6.1.4.1.7483.2.1.9.2.9.7 no-access
             tnAsonSnapshotEntry 1.3.6.1.4.1.7483.2.1.9.2.9.7.1 no-access
                 tnAsonSnapshotTime 1.3.6.1.4.1.7483.2.1.9.2.9.7.1.1 unsigned32 no-access
The date and time when the snapshot is scheduled.
                 tnAsonSnapshotStatus 1.3.6.1.4.1.7483.2.1.9.2.9.7.1.2 snmpadminstring read-only
This attribute indicates the status of the schedule snapshot operation. Here are the status strings: * Success * Pending - waiting for scheduled time * Snapshot in progress * failed - timed out - e.g. due to node reset at scheduled time. * failed - remote path exceeds the max length of 127 characters * Failed - local error * Failed - network error * Failed - Remote server error. default at creation time is pending.
                 tnAsonSnapshotRemotePath 1.3.6.1.4.1.7483.2.1.9.2.9.7.1.3 snmpadminstring read-only
Defines the directory on the server the snapshot shall be stored. Must be present when row status is active. Default is empty string.
                 tnAsonSnapshotRowStatus 1.3.6.1.4.1.7483.2.1.9.2.9.7.1.4 rowstatus read-only
The following two values are states, which may be may be read or written: - active(1), - set only used in combination - with createAndWait. - notInService(2), - set should not be used, use a destroy. The following value is a state, which may be read only: - notReady(3), - never used as cannot be incomplete. The following three values are actions, which may be written but are never read: - createAndGo(4), - recommended way to use. - createAndWait(5), - not recommended way to use. - destroy(6) - used to delete the row entry - after completion.
                 tnAsonSnapshotFilename 1.3.6.1.4.1.7483.2.1.9.2.9.7.1.5 snmpadminstring read-only
This attribute indicates the filename for the snapshot performed on the node. If none exists, this attribute will return an empty string. If a snapshot is in progress, this attribute will return an empty string.