TRAPEZE-NETWORKS-TRAP-MIB: View SNMP OID List / Download MIB

VENDOR: TRAPEZE NETWORKS, INC


 Home MIB: TRAPEZE-NETWORKS-TRAP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, TRAPEZE-NETWORKS-RF-DETECT-TC, TRAPEZE-NETWORKS-AP-TC, TRAPEZE-NETWORKS-RF-NOISE-TC-MIB, INET-ADDRESS-MIB, TRAPEZE-NETWORKS-BASIC-TC, TRAPEZE-NETWORKS-ROOT-MIB, TRAPEZE-NETWORKS-CLIENT-SESSION-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 trpzDeviceId 1.3.6.1.4.1.14525.2.1 object identifier no-access
Enumeration of devices as indicated in registration MIB. This object is used within notifications and is not accessible.
 trpzMobilityDomainIp 1.3.6.1.4.1.14525.2.2 ipaddress no-access
IP address of the other switch which the send switch is reporting on. This object is used within notifications and is not accessible.
 trpzAPMACAddress 1.3.6.1.4.1.14525.2.3 macaddress no-access
MAC address of the AP of interest. This object is used within notifications and is not accessible.
 trpzClientMACAddress 1.3.6.1.4.1.14525.2.4 macaddress no-access
MAC address of the client of interest. This object is used within notifications and is not accessible.
 trpzRFDetectXmtrMacAddr 1.3.6.1.4.1.14525.2.5 macaddress no-access
Describes the transmitter's MAC address. This object is used within notifications and is not accessible.
 trpzPortNum 1.3.6.1.4.1.14525.2.6 integer no-access
Port number on the AC which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.
 trpzAPRadioNum 1.3.6.1.4.1.14525.2.7 trpzradionum no-access
Radio number of the AP which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.
 trpzRadioRssi 1.3.6.1.4.1.14525.2.8 integer no-access
The received signal strength as measured by the AP radio which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. Not used by any notification.
 trpzRadioBSSID 1.3.6.1.4.1.14525.2.9 octet string no-access
The basic service set identifier of the rogue from the beacon frame reported by the AP during a detection sweep. This object is used within notifications and is not accessible.
 trpzUserName 1.3.6.1.4.1.14525.2.10 displaystring no-access
The client user name as learned from the AAA process. This object is used within notifications and is not accessible.
 trpzClientAuthServerIp 1.3.6.1.4.1.14525.2.11 ipaddress no-access
The client authentication server ip address. This object is used within notifications and is not accessible.
 trpzClientSessionState 1.3.6.1.4.1.14525.2.12 trpzclientsessionstate no-access
The state for a client session. This object is used within notifications and is not accessible.
 trpzDAPNum 1.3.6.1.4.1.14525.2.13 integer no-access
The DAP number on the wireless switch. This object is used within notifications and is not accessible.
 trpzClientIp 1.3.6.1.4.1.14525.2.14 ipaddress no-access
The client ip address. This object is used within notifications and is not accessible.
 trpzClientSessionId 1.3.6.1.4.1.14525.2.15 displaystring no-access
The unique global id for a client session. This object is used within notifications and is not accessible.
 trpzClientAuthenProtocolType 1.3.6.1.4.1.14525.2.16 trpzclientauthenprotocoltype no-access
The authentication protocol for a client. This object is used within notifications and is not accessible.
 trpzClientVLANName 1.3.6.1.4.1.14525.2.17 displaystring no-access
The vlan name a client is on. This object is used within notifications and is not accessible.
 trpzClientSessionStartTime 1.3.6.1.4.1.14525.2.18 timeticks no-access
The start time of a client session, relative to the sysUptime. This object is used within notifications and is not accessible. Obsolete. Do not use it because it's not vital information and often *cannot* be implemented to match the declared semantics: a client session might have been created on another wireless switch, *before* the current switch booted (the local zero of sysUptime).
 trpzClientFailureCause 1.3.6.1.4.1.14525.2.19 displaystring no-access
Display string for possible failure cause for a client session. This object is used within notifications and is not accessible.
 trpzClientRoamedFromPortNum 1.3.6.1.4.1.14525.2.20 integer no-access
The port number on the AC a client has roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromPhysPortNum'.
 trpzClientRoamedFromRadioNum 1.3.6.1.4.1.14525.2.21 trpzradionum no-access
The radio number of the AP the client is roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromRadioIndex'.
 trpzClientRoamedFromDAPNum 1.3.6.1.4.1.14525.2.22 integer no-access
The DAP number on the AC which reported this rogue during roam. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromApNum'.
 trpzUserParams 1.3.6.1.4.1.14525.2.23 displaystring no-access
A display string of User Parameters for client user authorization attributes learned through AAA and/or used by the system. Note that the syntax will be (name=value, name=value,..) for the parsing purpose. This object is used within notifications and is not accessible.
 trpzClientLocationPolicyIndex 1.3.6.1.4.1.14525.2.24 integer no-access
Index of the Location Policy rule applied to a user. This object is used within notifications and is not accessible.
 trpzClientAssociationFailureCause 1.3.6.1.4.1.14525.2.25 trpzassociationfailuretype no-access
The client association failure cause. This object is used within notifications and is not accessible.
 trpzClientAuthenticationFailureCause 1.3.6.1.4.1.14525.2.26 trpzauthenticationfailuretype no-access
The client authentication failure cause. This object is used within notifications and is not accessible.
 trpzClientAuthorizationFailureCause 1.3.6.1.4.1.14525.2.27 trpzauthorizationfailuretype no-access
The client authorization failure cause. Note that if it is the user-param, we would additionally expect the failure cause description to list the user attribute value that caused the failure. This object is used within notifications and is not accessible.
 trpzClientFailureCauseDescription 1.3.6.1.4.1.14525.2.28 displaystring no-access
Display string for describing the client failure cause. This object is used within notifications and is not accessible.
 trpzClientRoamedFromWsIp 1.3.6.1.4.1.14525.2.29 ipaddress no-access
The system IP address of the AC (wireless switch) a client roamed from. This object is used within notifications and is not accessible.
 trpzClientRoamedFromAccessType 1.3.6.1.4.1.14525.2.30 trpzaccesstype no-access
The client access type (ap, dap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromAccessMode'.
 trpzClientAccessType 1.3.6.1.4.1.14525.2.31 trpzaccesstype no-access
The client access type (ap, dap, wired). This object is used within notifications and is not accessible. For new traps, use trpzClientAccessMode instead of this object.
 trpzRadioMACAddress 1.3.6.1.4.1.14525.2.32 macaddress no-access
AP Radio MAC address. This object is used within notifications and is not accessible.
 trpzRadioPowerChangeReason 1.3.6.1.4.1.14525.2.33 trpzradiopowerchangetype no-access
The type of event that caused an AP radio power change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.
 trpzNewChannelNum 1.3.6.1.4.1.14525.2.34 integer no-access
New channel number of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.
 trpzOldChannelNum 1.3.6.1.4.1.14525.2.35 integer no-access
Old channel number of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.
 trpzChannelChangeReason 1.3.6.1.4.1.14525.2.36 trpzchannelchangetype no-access
The type of event that caused an AP radio channel change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.
 trpzRFDetectListenerListInfo 1.3.6.1.4.1.14525.2.37 octet string no-access
The RF Detection Listener list info including a list of (listener mac, rssi, channel, ssid, time). There will be a maximum of 6 entries in the list. Formats: MAC: 18 bytes: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X RSSI: 10 bytes: %10d CHANNEL: 3 bytes: %3d SSID: 32 bytes: %s TIME: 26 bytes: %s Maximum size per entry is 89+4+2 = 95 bytes. Maximum size of the string is 6*95= 571 bytes (include NULL). This object is used within notifications and is not accessible.
 trpzRadioSSID 1.3.6.1.4.1.14525.2.38 displaystring no-access
The radio SSID string This object is used within notifications and is not accessible.
 trpzNewPowerLevel 1.3.6.1.4.1.14525.2.39 trpzpowerlevel no-access
New power level of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.
 trpzOldPowerLevel 1.3.6.1.4.1.14525.2.40 trpzpowerlevel no-access
Old power level of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.
 trpzRadioPowerChangeDescription 1.3.6.1.4.1.14525.2.41 displaystring no-access
The radio power change description. In the case of reason being dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2), clientMacAddress will be included in the description. This object is used within notifications and is not accessible.
 trpzCounterMeasurePerformerListInfo 1.3.6.1.4.1.14525.2.42 displaystring no-access
A list of information for APs performing Counter Measures including a list of performer mac addresses. This object is used within notifications and is not accessible. Not used by any notification.
 trpzClientDot1xState 1.3.6.1.4.1.14525.2.43 trpzclientdot1xstate no-access
The state for a client 802.1X. This object is used within notifications and is not accessible.
 trpzClientDot1xFailureCause 1.3.6.1.4.1.14525.2.44 trpzdot1xfailuretype no-access
The client 802.1X failure cause. This object is used within notifications and is not accessible.
 trpzAPAccessType 1.3.6.1.4.1.14525.2.45 trpzaccesstype no-access
The access point access type (ap, dap,). This object is used within notifications and is not accessible. Not used by any notification.
 trpzUserAccessType 1.3.6.1.4.1.14525.2.46 trpzuseraccesstype no-access
The user access type (MAC, WEB, DOT1X, LAST-RESORT). This object is used within notifications and is not accessible.
 trpzClientSessionElapsedTime 1.3.6.1.4.1.14525.2.47 timeticks no-access
The elapsed time for a client session. Obsoleted because session time is usually reported in seconds. This object is used within notifications and is not accessible.
 trpzLocalId 1.3.6.1.4.1.14525.2.48 integer no-access
Local Id for the session. This object is used within notifications and is not accessible.
 trpzRFDetectDoSType 1.3.6.1.4.1.14525.2.49 trpzrfdetectdostype no-access
The type of denial of service (DoS) attack. This object is used within notifications and is not accessible.
 trpzSourceWsIp 1.3.6.1.4.1.14525.2.50 ipaddress no-access
IP address of another AC (wireless switch). This object is used within notifications and is not accessible.
 trpzClientVLANid 1.3.6.1.4.1.14525.2.51 integer no-access
VLAN ID used by client traffic. This object is used within notifications and is not accessible.
 trpzClientVLANtag 1.3.6.1.4.1.14525.2.52 integer no-access
VLAN tag used by client traffic. This object is used within notifications and is not accessible.
 trpzDeviceModel 1.3.6.1.4.1.14525.2.53 displaystring no-access
The model of a device in printable US-ASCII. If unknown (or not available), then the value is a zero length string. This object is used within notifications and is not accessible.
 trpzDeviceSerNum 1.3.6.1.4.1.14525.2.54 trpzapserialnum no-access
The serial number of an AP in printable US-ASCII. If unknown (or not available), then the value is a zero length string. Should NOT be used to identify other devices, for example an AC (wireless switch). This object is used within notifications and is not accessible.
 trpzRsaPubKeyFingerPrint 1.3.6.1.4.1.14525.2.55 trpzapfingerprint no-access
The hash of the RSA public key (of a key pair) in binary form that uniquely identifies the public key of an AP. This object is used within notifications and is not accessible.
 trpzDAPconnectWarningType 1.3.6.1.4.1.14525.2.56 integer no-access
The type of DAP connect warning. The values are: not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair but did not have its fingerprint configured on the AC, has connected to the AC when 'dap security' set to 'OPTIONAL' secure-handshake-failure(2).............a DAP tried to connect to the AC with security, but the handshake failed not-configured-fingerprint-required(3)..a DAP tried to connect to the AC with security, but 'dap security' set to 'REQUIRED', and no fingerprint was configured for the DAP fingerprint-mismatch(4).................a DAP tried to connect to the AC with security and its fingerprint was configured, but the fingerprint did not match the computed one This object is used within notifications and is not accessible. Enumeration: 'not-configured-fingerprint-connect': 1, 'not-configured-fingerprint-required': 3, 'secure-handshake-failure': 2, 'fingerprint-mismatch': 4.
 trpzClientMACAddress2 1.3.6.1.4.1.14525.2.57 macaddress no-access
MAC address of the second client of interest. This object is used within notifications and is not accessible.
 trpzApAttachType 1.3.6.1.4.1.14525.2.58 trpzapattachtype no-access
How the AP is attached to the AC (directly or via L2/L3 network). This object is used within notifications and is not accessible.
 trpzApPortOrDapNum 1.3.6.1.4.1.14525.2.59 trpzapportordapnum no-access
The Port Number if the AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. This object is used within notifications and is not accessible. Obsoleted by trpzApNum. (In 6.0, direct- and network-attached APs were unified.)
 trpzApName 1.3.6.1.4.1.14525.2.60 displaystring no-access
The name of the AP, as assigned in AC's CLI; defaults to AP (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). This object is used within notifications and is not accessible.
 trpzApTransition 1.3.6.1.4.1.14525.2.61 trpzaptransition no-access
AP state Transition, as seen by the AC. This object is used within notifications and is not accessible.
 trpzApFailDetail 1.3.6.1.4.1.14525.2.62 trpzapfaildetail no-access
Detailed failure code for some of the transitions specified in 'trpzApTransition' object. This object is used within notifications and is not accessible.
 trpzRadioType 1.3.6.1.4.1.14525.2.63 trpzradiotype no-access
Indicates the AP Radio Type, as seen by AC. This object is used within notifications and is not accessible.
 trpzRadioConfigState 1.3.6.1.4.1.14525.2.64 trpzradioconfigstate no-access
Indicates the Radio State, as seen by the AC. This object is used within notifications and is not accessible.
 trpzApConnectSecurityType 1.3.6.1.4.1.14525.2.65 trpzapconnectsecuritytype no-access
Indicates the security level of the connection between AP and AC. This object is used within notifications and is not accessible.
 trpzApServiceAvailability 1.3.6.1.4.1.14525.2.66 trpzapserviceavailability no-access
Indicates the level of wireless service availability. This object is used within notifications and is not accessible.
 trpzApWasOperational 1.3.6.1.4.1.14525.2.67 trpzapwasoperational no-access
Indicates whether the AP was operational before a transition occurred. This object is used within notifications and is not accessible.
 trpzClientTimeSinceLastRoam 1.3.6.1.4.1.14525.2.68 unsigned32 no-access
The time in seconds since the most recent roam of a given client. This object is used within notifications and is not accessible.
 trpzClientIpAddrChangeReason 1.3.6.1.4.1.14525.2.69 trpzclientipaddrchangereason no-access
Indicates the reason why client IP address changed. This object is used within notifications and is not accessible.
 trpzRFDetectRogueAPMacAddr 1.3.6.1.4.1.14525.2.70 macaddress no-access
Describes the MAC address of the Rogue AP the transmitter is connected to. This object is used within notifications and is not accessible.
 trpzBlacklistingRemainingTime 1.3.6.1.4.1.14525.2.71 unsigned32 no-access
The time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible.
 trpzBlacklistingCause 1.3.6.1.4.1.14525.2.72 trpzblacklistingcause no-access
Indicates the reason why a given transmitter is blacklisted. This object is used within notifications and is not accessible.
 trpzNumLicensedActiveAPs 1.3.6.1.4.1.14525.2.73 unsigned32 no-access
Indicates the maximum (licensed) number of active APs for this AC. This object is used within notifications and is not accessible.
 trpzClientDynAuthorClientIp 1.3.6.1.4.1.14525.2.74 ipaddress no-access
The dynamic authorization client IP address which caused the change of authorization. This object is used within notifications and is not accessible.
 trpzChangedUserParamOldValues 1.3.6.1.4.1.14525.2.75 trpzuserattributelist no-access
A display string listing the changed AAA attributes and their values, before the change of authorization was executed. This object is used within notifications and is not accessible.
 trpzChangedUserParamNewValues 1.3.6.1.4.1.14525.2.76 trpzuserattributelist no-access
A display string listing the changed AAA attributes and their values, after the change of authorization was executed. This object is used within notifications and is not accessible.
 trpzClientDisconnectSource 1.3.6.1.4.1.14525.2.77 trpzsessiondisconnecttype no-access
The external source that initiated the termination of a session. This object is used within notifications and is not accessible.
 trpzClientDisconnectDescription 1.3.6.1.4.1.14525.2.78 displaystring no-access
Display string for providing available information related to the external source that initiated a session termination. This object is used within notifications and is not accessible.
 trpzMobilityDomainSecondarySeedIp 1.3.6.1.4.1.14525.2.79 ipaddress no-access
The secondary seed IP address to which the Mobility Domain has failed over. This object is used within notifications and is not accessible.
 trpzMobilityDomainPrimarySeedIp 1.3.6.1.4.1.14525.2.80 ipaddress no-access
The primary seed IP address to which the Mobility Domain has failed back. This object is used within notifications and is not accessible.
 trpzRFDetectClassificationReason 1.3.6.1.4.1.14525.2.81 trpzrfdetectclassificationreason no-access
Indicates the reason why a RF device is classified the way it is. This object is used within notifications and is not accessible.
 trpzConfigSaveFileName 1.3.6.1.4.1.14525.2.82 displaystring no-access
Display string listing the name of the file to which the running configuration was saved. This object is used within notifications and is not accessible.
 trpzConfigSaveInitiatorType 1.3.6.1.4.1.14525.2.83 trpzconfigsaveinitiatortype no-access
Indicates the source that initiated a configuration save. This object is used within notifications and is not accessible.
 trpzConfigSaveInitiatorIp 1.3.6.1.4.1.14525.2.84 ipaddress no-access
The IP address of the source that initiated a configuration save. This object is used within notifications and is not accessible.
 trpzConfigSaveInitiatorDetails 1.3.6.1.4.1.14525.2.85 displaystring no-access
Display string listing additional information regarding the source that initiated a configuration save, when available. This object is used within notifications and is not accessible.
 trpzConfigSaveGeneration 1.3.6.1.4.1.14525.2.86 counter32 no-access
Indicates the number of configuration changes since the last system boot. The generation count is used to track the number of times the running configuration has been changed due to administrative actions (set/clear), SNMP requests (SET), XML requests (e.g. RingMaster). This object is used within notifications and is not accessible.
 trpzApNum 1.3.6.1.4.1.14525.2.87 trpzapnum no-access
The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. This object is used within notifications and is not accessible. Obsoletes trpzApPortOrDapNum. For clarity, use this object to identify an AP since in 6.0 directly attached APs and DAPs were unified.
 trpzRadioMode 1.3.6.1.4.1.14525.2.88 trpzradiomode no-access
Indicates the administratively controlled Radio Mode (enabled/disabled/sentry). This object is used within notifications and is not accessible.
 trpzMichaelMICFailureCause 1.3.6.1.4.1.14525.2.89 trpzmichaelmicfailurecause no-access
Indicates the Michael MIC Failure cause / who detected it. This object is used within notifications and is not accessible.
 trpzClientAccessMode 1.3.6.1.4.1.14525.2.90 trpzclientaccessmode no-access
The client access mode (ap, wired). This object is used within notifications and is not accessible. Intended to replace trpzClientAccessType. (In 6.0, direct- and network-attached APs were unified.)
 trpzClientAuthorizationReason 1.3.6.1.4.1.14525.2.91 trpzclientauthorizationreason no-access
Indicates the reason why client performed AAA authorization. This object is used within notifications and is not accessible.
 trpzPhysPortNum 1.3.6.1.4.1.14525.2.92 trpzphysportnumberorzero no-access
Physical Port Number on the AC. Zero means the port is unknown or not applicable (for example, when trpzClientAccessMode = 'ap'). This object is used within notifications and is not accessible.
 trpzApMgrOldIp 1.3.6.1.4.1.14525.2.93 ipaddress no-access
The IP address of the AP's former primary manager switch. This object is used within notifications and is not accessible.
 trpzApMgrNewIp 1.3.6.1.4.1.14525.2.94 ipaddress no-access
The IP address of the AP's new primary manager switch. This address was formerly the AP's secondary backup link. This object is used within notifications and is not accessible.
 trpzApMgrChangeReason 1.3.6.1.4.1.14525.2.95 trpzapmgrchangereason no-access
Indicates the reason why the AP's primary manager changed. This object is used within notifications and is not accessible.
 trpzClientClearedReason 1.3.6.1.4.1.14525.2.96 trpzclientclearedreason no-access
Indicates the reason why client was cleared. This object is used within notifications and is not accessible.
 trpzMobilityDomainResiliencyStatus 1.3.6.1.4.1.14525.2.97 trpzmobilitydomainresiliencystatus no-access
Indicates the current resilient capacity status for a mobility domain. This object is used within notifications and is not accessible.
 trpzClientSessionElapsedSeconds 1.3.6.1.4.1.14525.2.98 unsigned32 no-access
Indicates the time in seconds elapsed since the start of the Client Session. This object is used within notifications and is not accessible.
 trpzRadioChannelWidth 1.3.6.1.4.1.14525.2.99 trpzradiochannelwidth no-access
Indicates the administratively controlled Channel Width (20MHz/40MHz). This object is used within notifications and is not accessible.
 trpzRadioMimoState 1.3.6.1.4.1.14525.2.100 trpzradiomimostate no-access
Indicates the Radio MIMO State, as seen by the AC (1x1/2x3/3x3). This object is used within notifications and is not accessible.
 trpzClientRadioType 1.3.6.1.4.1.14525.2.101 trpzradiotype no-access
Indicates the Client Radio Type, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.
 trpzRFDetectXmtrRadioType 1.3.6.1.4.1.14525.2.102 trpzradiotype no-access
Indicates the Radio Type of the Transmitter, as detected by an attached AP and reported to the AC. The Transmitter may be a wireless client or an AP. This object is used within notifications and is not accessible.
 trpzRFDetectXmtrCryptoType 1.3.6.1.4.1.14525.2.103 trpzcryptotype no-access
Indicates the Crypto Type used by the Transmitter, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.
 trpzClusterFailureReason 1.3.6.1.4.1.14525.2.104 trpzclusterfailurereason no-access
Indicates the reason why cluster configuration failed to apply. This object is used within notifications and is not accessible.
 trpzClusterFailureDescription 1.3.6.1.4.1.14525.2.105 displaystring no-access
Display string for describing the cluster configuration failure cause. This object is used within notifications and is not accessible.
 trpzMultimediaCommunicationServerID 1.3.6.1.4.1.14525.2.106 displaystring no-access
The multimedia communication server ID. This object is used within notifications and is not accessible.
 trpzMultimediaLocalStationIp 1.3.6.1.4.1.14525.2.107 ipaddress no-access
The local multimedia station IP address. This object is used within notifications and is not accessible.
 trpzMultimediaLocalStationPort 1.3.6.1.4.1.14525.2.108 trpzipport no-access
The local multimedia station UDP port. This object is used within notifications and is not accessible.
 trpzMultimediaLocalStationEndpointID 1.3.6.1.4.1.14525.2.109 displaystring no-access
The local multimedia station endpoint ID. This object is used within notifications and is not accessible.
 trpzMultimediaRemoteStationIp 1.3.6.1.4.1.14525.2.110 ipaddress no-access
The remote multimedia station IP address. This object is used within notifications and is not accessible.
 trpzMultimediaRemoteStationPort 1.3.6.1.4.1.14525.2.111 trpzipport no-access
The remote multimedia station UDP port. This object is used within notifications and is not accessible.
 trpzMultimediaRemoteStationEndpointID 1.3.6.1.4.1.14525.2.112 displaystring no-access
The remote multimedia station endpoint ID. This object is used within notifications and is not accessible.
 trpzMultimediaSignalingProtocol 1.3.6.1.4.1.14525.2.113 trpzmultimediasignalingprotocol no-access
The multimedia signaling protocol that was used for initiating this call (session). This object is used within notifications and is not accessible.
 trpzMultimediaCallBandwidthAndCodec 1.3.6.1.4.1.14525.2.114 displaystring no-access
Display string providing information about the multimedia call codec and bandwidth. This object is used within notifications and is not accessible.
 trpzMultimediaCallDataRate 1.3.6.1.4.1.14525.2.115 unsigned32 no-access
The data rate, in Kbps. This object is used within notifications and is not accessible.
 trpzMultimediaCallRssi 1.3.6.1.4.1.14525.2.116 trpzrssi no-access
The client RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal. This object is used within notifications and is not accessible.
 trpzMultimediaCallFailureReason 1.3.6.1.4.1.14525.2.117 trpzmultimediacallfailurereason no-access
Indicates the reason why the multimedia call has failed. This object is used within notifications and is not accessible.
 trpzMultimediaCallDirection 1.3.6.1.4.1.14525.2.118 trpzmultimediacalldirection no-access
Indicates the multimedia call direction (incoming/outgoing). This object is used within notifications and is not accessible.
 trpzApTunnelLimit 1.3.6.1.4.1.14525.2.119 unsigned32 no-access
Indicates the maximum number of tunnels supported for an AP. This object is used within notifications and is not accessible.
 trpzWsTunnelLimit 1.3.6.1.4.1.14525.2.120 unsigned32 no-access
Indicates the maximum number of tunnels supported for an AC (wireless switch). This object is used within notifications and is not accessible.
 trpzWsTunnelLimitType 1.3.6.1.4.1.14525.2.121 trpzwstunnellimittype no-access
Indicates the type of limit exceeded that caused the AC (wireless switch) to reject a tunnel creation request. This object is used within notifications and is not accessible.
 trpzRFNoiseSourceID 1.3.6.1.4.1.14525.2.122 trpzrfnoisesourceid no-access
RF Noise Source ID. This object is used within notifications and is not accessible.
 trpzRFNoiseSourceType 1.3.6.1.4.1.14525.2.123 trpzrfnoisesourcetype no-access
RF Noise Source Type. This object is used within notifications and is not accessible.
 trpzRFNoiseChannel 1.3.6.1.4.1.14525.2.124 trpzchannelnum no-access
Channel number. This object is used within notifications and is not accessible.
 trpzRFNoiseRssi 1.3.6.1.4.1.14525.2.125 trpzrssi no-access
The noise RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates stronger noise. This object is used within notifications and is not accessible.
 trpzRFNoiseDutyCycle 1.3.6.1.4.1.14525.2.126 unsigned32 no-access
Estimated Duty Cycle: fraction of time that a noise source is transmitting. This object is used within notifications and is not accessible.
 trpzRFNoiseChannelInterferenceMeasure 1.3.6.1.4.1.14525.2.127 unsigned32 no-access
Severity of channel interference attributed to a noise source. A higher value indicates more severe interference. This object is used within notifications and is not accessible.
 trpzRFNoiseAge 1.3.6.1.4.1.14525.2.128 unsigned32 no-access
Age of noise in seconds. This object is used within notifications and is not accessible.
 trpzM2UMulticastAddrType 1.3.6.1.4.1.14525.2.129 inetaddresstype no-access
The address type of 'trpzM2UMulticastAddr'. This object is used within notifications and is not accessible.
 trpzM2UMulticastAddr 1.3.6.1.4.1.14525.2.130 inetaddress no-access
The multicast address for which conversion to unicast is performed. The type of this address is specified in 'trpzM2UMulticastAddrType'. This object is used within notifications and is not accessible.
 trpzM2UConvNotPossibleReason 1.3.6.1.4.1.14525.2.131 trpzm2uconvnotpossiblereason no-access
Indicates the reason why multicast to unicast conversion cannot be performed on an AP with this feature enabled. This object is used within notifications and is not accessible.
 trpzRadioBand 1.3.6.1.4.1.14525.2.132 trpzradioband no-access
Indicates the radio band used in an auto-tune operation. This object is used within notifications and is not accessible.
 trpzRadiosTunedCount 1.3.6.1.4.1.14525.2.133 unsigned32 no-access
Indicates how many radios had their operational characteristics changed as a result of an auto-tune process. This object is used within notifications and is not accessible.
 trpzAutoTuneFailureReason 1.3.6.1.4.1.14525.2.134 trpzautotunefailurereason no-access
Indicates the reason why an auto-tune operation failed to complete. This object is used within notifications and is not accessible.
 trpzClientAuthServerAddrType 1.3.6.1.4.1.14525.2.135 inetaddresstype no-access
The address type of 'trpzClientAuthServerAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.
 trpzClientAuthServerAddr 1.3.6.1.4.1.14525.2.136 inetaddress no-access
The Internet address of the client authentication server. The type of this address is specified in 'trpzClientAuthServerAddrType'. This object is used within notifications and is not accessible.
 trpzClientRoamedFromWsAddrType 1.3.6.1.4.1.14525.2.137 inetaddresstype no-access
The address type of 'trpzClientRoamedFromWsAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.
 trpzClientRoamedFromWsAddr 1.3.6.1.4.1.14525.2.138 inetaddress no-access
The system IP address of the AC (wireless switch) a client roamed from. The type of this address is specified in 'trpzClientRoamedFromWsAddrType'. This object is used within notifications and is not accessible.
 trpzClientDynAuthorClientAddrType 1.3.6.1.4.1.14525.2.139 inetaddresstype no-access
The address type of 'trpzClientDynAuthorClientAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.
 trpzClientDynAuthorClientAddr 1.3.6.1.4.1.14525.2.140 inetaddress no-access
The dynamic authorization client IP address which caused the change of authorization. The type of this address is specified in 'trpzClientDynAuthorClientAddrType'. This object is used within notifications and is not accessible.
 trpzClientIpAddrType 1.3.6.1.4.1.14525.2.141 inetaddresstype no-access
The address type of 'trpzClientIpAddr'. Only the values 'ipv4(1)' and 'ipv6(2)' are reported. This object is used within notifications and is not accessible.
 trpzClientIpAddr 1.3.6.1.4.1.14525.2.142 inetaddress no-access
Indicates an IP address of the client. The type of this address is specified in 'trpzClientIpAddrType'. This object is used within notifications and is not accessible.
 trpzClientIPv4Addr 1.3.6.1.4.1.14525.2.143 inetaddressipv4 no-access
The IPv4 address of the client. If the client does not use the IPv4 stack, or its IPv4 address has not yet been detected, then all octets will have the value 0. This object is used within notifications and is not accessible.
 trpzClientIPv6LinkLocalAddr 1.3.6.1.4.1.14525.2.144 inetaddressipv6 no-access
The IPv6 link-local address of the client. If the client does not use the IPv6 stack, or its IPv6 link-local address has not yet been detected, then all octets will have the value 0. This object is used within notifications and is not accessible.
 trpzApRadioIndex 1.3.6.1.4.1.14525.2.145 trpzapradioindex no-access
AP Radio index. Intended to replace 'trpzAPRadioNum'. This object is used within notifications and is not accessible.
 trpzClientRoamedFromAccessMode 1.3.6.1.4.1.14525.2.146 trpzclientaccessmode no-access
The client access mode (ap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoletes 'trpzClientRoamedFromAccessType'. (In 6.0, direct- and network-attached APs were unified.)
 trpzClientRoamedFromApNum 1.3.6.1.4.1.14525.2.147 trpzapnum no-access
The number of the AP the client roamed from. Obsoletes 'trpzClientRoamedFromDAPNum'. This object is used within notifications and is not accessible.
 trpzClientRoamedFromRadioIndex 1.3.6.1.4.1.14525.2.148 trpzapradioindex no-access
The index of the AP Radio the client roamed from. Obsoletes 'trpzClientRoamedFromRadioNum'. This object is used within notifications and is not accessible.
 trpzClientRoamedFromPhysPortNum 1.3.6.1.4.1.14525.2.149 trpzphysportnumberorzero no-access
Identifies the physical port on the AC used by the wired-auth client, before roam. Zero means the port is unknown or not applicable (for example, when trpzClientRoamedFromAccessMode = 'ap'). Obsoletes 'trpzClientRoamedFromPortNum'. This object is used within notifications and is not accessible.
 trpzClientDeviceType 1.3.6.1.4.1.14525.2.150 trpzclientdevicetype no-access
The type of the client device. Is a zero length string if unknown. This object is used within notifications and is not accessible.
 trpzClientDeviceTypeOld 1.3.6.1.4.1.14525.2.151 trpzclientdevicetype no-access
The type of the client device, before change. Is a zero length string if unknown. This object is used within notifications and is not accessible.
 trpzClientDeviceGroup 1.3.6.1.4.1.14525.2.152 trpzclientdevicegroupname no-access
The group that the detected client device type belongs to. Is a zero length string if the device type is unknown. This object is used within notifications and is not accessible.
 trpzClientDeviceProfileName 1.3.6.1.4.1.14525.2.153 trpzclientdeviceprofilename no-access
The name of the device profile associated with the detected client device. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode or if not set. In 'detect-only' mode policy enforcement is disabled. This object is used within notifications and is not accessible.
 trpzClientDeviceProfileNameOld 1.3.6.1.4.1.14525.2.154 trpzclientdeviceprofilename no-access
The name of the device profile associated with the detected client device, before change. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode or if not set. In 'detect-only' mode policy enforcement is disabled. This object is used within notifications and is not accessible.
 trpzClientDeviceProfileChangeReason 1.3.6.1.4.1.14525.2.155 trpzclientdeviceprofilechangereason no-access
The reason why the device profile changed. This object is used within notifications and is not accessible.
 trpzTrapMib 1.3.6.1.4.1.14525.4.1
Notifications emitted by Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2004-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
 trpzTrapsV2 1.3.6.1.4.1.14525.5.0
     trpzDeviceFailTrap 1.3.6.1.4.1.14525.5.0.1
The device has a failure indication
     trpzDeviceOkayTrap 1.3.6.1.4.1.14525.5.0.2
The device has recovered
     trpzPoEFailTrap 1.3.6.1.4.1.14525.5.0.3
PoE has failed on the indicated port
     trpzApTimeoutTrap 1.3.6.1.4.1.14525.5.0.4
The AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has not responded. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'timeout'.
     trpzAPBootTrap 1.3.6.1.4.1.14525.5.0.5
The AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has booted. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'bootSuccess'.
     trpzMobilityDomainJoinTrap 1.3.6.1.4.1.14525.5.0.6
The mobility domain member has received an UP notice from the remote address.
     trpzMobilityDomainTimeoutTrap 1.3.6.1.4.1.14525.5.0.7
The mobility domain member has declared the remote address to be DOWN.
     trpzMpMichaelMICFailure 1.3.6.1.4.1.14525.5.0.8
Two Michael MIC failures were seen within 60 seconds of each other. Obsoleted by trpzMichaelMICFailure.
     trpzRFDetectRogueAPTrap 1.3.6.1.4.1.14525.5.0.9
This trap is sent when RF detection finds a rogue AP. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2.
     trpzRFDetectAdhocUserTrap 1.3.6.1.4.1.14525.5.0.10
This trap is sent when RF detection sweep finds a ad-hoc user. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. trpzRFDetectListenerListInfo is a display string of a list of listener information.
     trpzRFDetectRogueDisappearTrap 1.3.6.1.4.1.14525.5.0.11
This trap is sent when a rogue has disappeared. Obsoleted by trpzRFDetectRogueDeviceDisappearTrap.
     trpzClientAuthenticationFailureTrap 1.3.6.1.4.1.14525.5.0.12
This trap is sent if a client authentication fails.
     trpzClientAuthorizationFailureTrap 1.3.6.1.4.1.14525.5.0.13
This trap is sent if a client authorization fails.
     trpzClientAssociationFailureTrap 1.3.6.1.4.1.14525.5.0.14
This trap is sent if a client association fails.
     trpzClientAuthorizationSuccessTrap 1.3.6.1.4.1.14525.5.0.15
This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5.
     trpzClientDeAssociationTrap 1.3.6.1.4.1.14525.5.0.16
This trap is sent if a client de-association occurred. Obsoleted by trpzClientDeAssociationTrap2.
     trpzClientRoamingTrap 1.3.6.1.4.1.14525.5.0.17
This trap is sent if a client roams from one location to another. Obsoleted by trpzClientRoamingTrap2.
     trpzAutoTuneRadioPowerChangeTrap 1.3.6.1.4.1.14525.5.0.18
This trap is sent if a radio's power level has changed based on auto-tune.
     trpzAutoTuneRadioChannelChangeTrap 1.3.6.1.4.1.14525.5.0.19
This trap is sent if a radio's channel has changed based on auto-tune.
     trpzCounterMeasureStartTrap 1.3.6.1.4.1.14525.5.0.20
This trap is sent when counter measures are started against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we are doing counter measures against. trpzRadioMACAddress identifies the radio performing the countermeasures.
     trpzCounterMeasureStopTrap 1.3.6.1.4.1.14525.5.0.21
This trap is sent when counter measures are stopped against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we were doing counter measures against. trpzRadioMACAddress identifies the radio performing the countermeasures.
     trpzClientDot1xFailureTrap 1.3.6.1.4.1.14525.5.0.22
This trap is sent if a client failed 802.1X.
     trpzClientClearedTrap 1.3.6.1.4.1.14525.5.0.23
This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3.
     trpzClientAuthorizationSuccessTrap2 1.3.6.1.4.1.14525.5.0.24
This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5.
     trpzRFDetectSpoofedMacAPTrap 1.3.6.1.4.1.14525.5.0.25
This trap is sent when RF detection finds an AP using the MAC of the listener. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectDoSTrap and trpzRFDetectRogueDeviceTrap2. One of the two traps will be sent depending on the type of AP MAC spoofing detected.
     trpzRFDetectSpoofedSsidAPTrap 1.3.6.1.4.1.14525.5.0.26
This trap is sent when RF detection finds an AP using the SSID of the listener, and the AP is not in the mobility domain. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent, depending on RF detection classification rules.
     trpzRFDetectDoSTrap 1.3.6.1.4.1.14525.5.0.27
This trap is sent when RF detection finds a denial of service (DoS) occurring. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information.
     trpzRFDetectClientViaRogueWiredAPTrap 1.3.6.1.4.1.14525.5.0.28
This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3.
     trpzRFDetectInterferingRogueAPTrap 1.3.6.1.4.1.14525.5.0.29
This trap is sent when RF detection finds an interfering rogue AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectSuspectDeviceTrap2.
     trpzRFDetectInterferingRogueDisappearTrap 1.3.6.1.4.1.14525.5.0.30
This trap is sent when an interfering rogue has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. Obsoleted by trpzRFDetectSuspectDeviceDisappearTrap.
     trpzRFDetectUnAuthorizedSsidTrap 1.3.6.1.4.1.14525.5.0.31
This trap is sent when RF detection finds use of an unauthorized SSID. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized SSID is classified as rogue or suspect because of this.
     trpzRFDetectUnAuthorizedOuiTrap 1.3.6.1.4.1.14525.5.0.32
This trap is sent when RF detection finds use of an unauthorized OUI. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized OUI is classified as rogue or suspect because of this.
     trpzRFDetectUnAuthorizedAPTrap 1.3.6.1.4.1.14525.5.0.33
This trap is sent when RF detection finds operation of an unauthorized AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2.
     trpzDAPConnectWarningTrap 1.3.6.1.4.1.14525.5.0.34
A DAP, tried to connect to the AC. trpzDeviceModel provides the model of the DAP. trpzDeviceSerNum provides the serial number of the DAP. trpzRsaPubKeyFingerPrint provides the computed fingerprint of the DAP. trpzDAPconnectWarningType provides the type of connect warning. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'connectFail'.
     trpzRFDetectDoSPortTrap 1.3.6.1.4.1.14525.5.0.35
This trap is sent when RF detection finds a denial of service (DoS) occurring. This has port and AP info instead of 'Listener info'. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzClientAccessType specifies whether wired, AP, or DAP. trpzPortNum (for wired or AP), the port that is used. trpzDAPNum (for a DAP), the ID of the DAP.
     trpzMpMichaelMICFailure2 1.3.6.1.4.1.14525.5.0.36
Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress is the source of the first failure, and object trpzClientMACAddress2 source of the second failure. Obsoleted by trpzMichaelMICFailure.
     trpzApNonOperStatusTrap 1.3.6.1.4.1.14525.5.0.37
This trap is sent when the AP changes state and the new one is a non-operational state. Obsoleted by trpzApNonOperStatusTrap2.
     trpzApOperRadioStatusTrap 1.3.6.1.4.1.14525.5.0.38
This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by trpzApOperRadioStatusTrap3.
     trpzClientIpAddrChangeTrap 1.3.6.1.4.1.14525.5.0.39
This trap is sent when a client's IP address changes. The most likely case for this is when the client first connects to the network. Obsoleted by trpzClientIpAddrChangeTrap2.
     trpzClientAssociationSuccessTrap 1.3.6.1.4.1.14525.5.0.40
This trap is sent if a client association succeeds. WARNING: DO NOT enable it in normal use. It may impair switch performance! Only recommended for debugging network issues.
     trpzClientAuthenticationSuccessTrap 1.3.6.1.4.1.14525.5.0.41
This trap is sent if a client authentication succeeds.
     trpzClientDeAuthenticationTrap 1.3.6.1.4.1.14525.5.0.42
This trap is sent if a client de-authentication occurred. Obsoleted by trpzClientDeAuthenticationTrap2.
     trpzRFDetectBlacklistedTrap 1.3.6.1.4.1.14525.5.0.43
This trap is sent if an association, re-association or de-association request (packet) is detected from a blacklisted transmitter (identified by MAC: 'trpzRFDetectXmtrMacAddr'). If 'trpzBlacklistingCause' is 'configured', then 'trpzBlacklistingRemainingTime' will be zero, meaning indefinite time (depending on administrative actions on the Black List). Otherwise, 'trpzBlacklistingRemainingTime' will indicate the time in seconds until this transmitter's requests could be allowed.
     trpzRFDetectClientViaRogueWiredAPTrap2 1.3.6.1.4.1.14525.5.0.44
This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3.
     trpzRFDetectAdhocUserDisappearTrap 1.3.6.1.4.1.14525.5.0.45
This trap is sent when RF detection sweep finds that an ad-hoc user disappeared. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user.
     trpzApRejectLicenseExceededTrap 1.3.6.1.4.1.14525.5.0.46
This trap is sent when an AC (wireless switch) receives a packet from an inactive AP and attaching that AP would make the AC exceed the maximum (licensed) number of active APs.
     trpzClientDynAuthorChangeSuccessTrap 1.3.6.1.4.1.14525.5.0.47
This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. Obsoleted by trpzClientDynAuthorChangeSuccessTrap2.
     trpzClientDynAuthorChangeFailureTrap 1.3.6.1.4.1.14525.5.0.48
This trap is sent if a change of authorization request sent by an authorized dynamic authorization client is unsuccessful.
     trpzClientDisconnectTrap 1.3.6.1.4.1.14525.5.0.49
This trap is sent when a client session is terminated administratively. Obsoleted by trpzClientDisconnectTrap2.
     trpzMobilityDomainFailOverTrap 1.3.6.1.4.1.14525.5.0.50
This trap is sent when the Mobility Domain fails over to the secondary seed.
     trpzMobilityDomainFailBackTrap 1.3.6.1.4.1.14525.5.0.51
This trap is sent when the Mobility Domain fails back to the primary seed.
     trpzRFDetectRogueDeviceTrap 1.3.6.1.4.1.14525.5.0.52
This trap is sent when RF detection finds a rogue device. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as rogue. Obsoleted by trpzRFDetectRogueDeviceTrap2.
     trpzRFDetectRogueDeviceDisappearTrap 1.3.6.1.4.1.14525.5.0.53
This trap is sent when a rogue device has disappeared. This trap obsoletes the trpzRFDetectRogueDisappearTrap.
     trpzRFDetectSuspectDeviceTrap 1.3.6.1.4.1.14525.5.0.54
This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as suspect. Obsoleted by trpzRFDetectSuspectDeviceTrap2.
     trpzRFDetectSuspectDeviceDisappearTrap 1.3.6.1.4.1.14525.5.0.55
This trap is sent when a suspect device has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. This trap obsoletes the trpzRFDetectInterferingRogueDisappearTrap.
     trpzRFDetectClientViaRogueWiredAPTrap3 1.3.6.1.4.1.14525.5.0.56
This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. ClassificationReason indicates the reason why the AP is classified as rogue. This trap obsoletes the trpzRFDetectClientViaRogueWiredAPTrap and trpzRFDetectClientViaRogueWiredAPTrap2.
     trpzRFDetectClassificationChangeTrap 1.3.6.1.4.1.14525.5.0.57
This trap is sent when RF detection classification rules change.
     trpzConfigurationSavedTrap 1.3.6.1.4.1.14525.5.0.58
This trap is sent when the running configuration of the switch is written to a configuration file.
     trpzApNonOperStatusTrap2 1.3.6.1.4.1.14525.5.0.59
This trap is sent when the AP changes state and the new one is a non-operational state. Obsoletes trpzApNonOperStatusTrap.
     trpzApOperRadioStatusTrap2 1.3.6.1.4.1.14525.5.0.60
This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by trpzApOperRadioStatusTrap3.
     trpzMichaelMICFailure 1.3.6.1.4.1.14525.5.0.61
Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress indicates the source of the first failure, and object trpzClientMACAddress2 indicates the source of the second failure. Service is interrupted for 60 seconds on the radio due to TKIP countermeasures having commenced. The radio is identified by trpzApNum and trpzAPRadioNum. An alternative way to identify the radio is trpzRadioMACAddress. Obsoletes trpzMpMichaelMICFailure and trpzMpMichaelMICFailure2.
     trpzClientAuthorizationSuccessTrap3 1.3.6.1.4.1.14525.5.0.62
This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by trpzClientAuthorizationSuccessTrap5.
     trpzApManagerChangeTrap 1.3.6.1.4.1.14525.5.0.63
This trap is sent when the AP's secondary link becomes its primary link.
     trpzClientClearedTrap2 1.3.6.1.4.1.14525.5.0.64
This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3.
     trpzMobilityDomainResiliencyStatusTrap 1.3.6.1.4.1.14525.5.0.65
This trap is sent by a mobility domain seed to announce changes in resilient capacity status.
     trpzApOperRadioStatusTrap3 1.3.6.1.4.1.14525.5.0.66
This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoletes trpzApOperRadioStatusTrap and trpzApOperRadioStatusTrap2.
     trpzClientAuthorizationSuccessTrap4 1.3.6.1.4.1.14525.5.0.67
This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; trpzClientRadioType gives the type of radio used by this client. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by trpzClientAuthorizationSuccessTrap5.
     trpzRFDetectRogueDeviceTrap2 1.3.6.1.4.1.14525.5.0.68
This trap is sent when RF detection finds a rogue device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (rogue device). trpzRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (rogue device). trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectClassificationReason indicates the reason why the device is classified as rogue. Obsoletes trpzRFDetectRogueAPTrap, trpzRFDetectUnAuthorizedAPTrap, trpzRFDetectRogueDeviceTrap.
     trpzRFDetectSuspectDeviceTrap2 1.3.6.1.4.1.14525.5.0.69
This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (suspect device). trpzRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (suspect device). trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectClassificationReason indicates the reason why the device is classified as suspect. Obsoletes trpzRFDetectInterferingRogueAPTrap, trpzRFDetectSuspectDeviceTrap.
     trpzClusterFailureTrap 1.3.6.1.4.1.14525.5.0.70
This trap is sent when the cluster configuration failed to apply. If trpzClusterFailureReason = 'validation-error': The validation error is reported by the receiving end of the configuration updates. The receiving end can be any AC (switch) in the mobility domain: member, secondary seed or primary seed. - Primary seed will be the receiving end of configuration updates when Primary seed is joining the cluster and Secondary seed has preempt mode enabled. - Both Secondary seed and member will be at the receiving end when Primary seed is active.
     trpzMultimediaCallFailureTrap 1.3.6.1.4.1.14525.5.0.71
This trap is sent when a multimedia call fails.
     trpzApTunnelLimitExceededTrap 1.3.6.1.4.1.14525.5.0.72
This trap is sent by the AP primary controller (PAM) when an AP rejects a tunnel creation request because it has already created the maximum number of tunnels it can support.
     trpzWsTunnelLimitExceededTrap 1.3.6.1.4.1.14525.5.0.73
This trap is sent when the AC (wireless switch) rejects a tunnel creation request because it has reached the maximum number of tunnels supported (indicated by 'trpzWsTunnelLimit'). When trpzWsTunnelLimitType = 'platform-tunnel-limit' (2) the AC has reached the maximum tunnel capacity, which depends on the platform. When trpzWsTunnelLimitType = 'ap-ws-tunnel-limit' (3) the AC has reached the AP-to-switch tunnels limit, which depends on the current situation of the AC (mobility domain, network domain, network resiliency status).
     trpzRFNoiseSourceTrap 1.3.6.1.4.1.14525.5.0.74
This trap is sent upon the appearance of a new noise source. 'trpzRadioMACAddress' indicates the listener (the AP radio reporting the noise). A given combination of noise source ID, listener and channel should trigger this trap at most once every 15 minutes.
     trpzM2UConvNotPossibleTrap 1.3.6.1.4.1.14525.5.0.75
This trap is sent when multicast to unicast conversion is enabled on the AP, but cannot be performed.
     trpzM2UConvAvailabilityRestoredTrap 1.3.6.1.4.1.14525.5.0.76
This trap is sent when the multicast to unicast conversion can be resumed on the AP, after disruption.
     trpzAutoTuneSuccessTrap 1.3.6.1.4.1.14525.5.0.77
This trap is sent when an auto-tune operation completed successfully.
     trpzAutoTuneFailureTrap 1.3.6.1.4.1.14525.5.0.78
This trap is sent when an auto-tune operation failed to complete.
     trpzClientDeAssociationTrap2 1.3.6.1.4.1.14525.5.0.79
This trap is sent if a client de-association occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client before deassociation; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDeAssociationTrap.
     trpzClientRoamingTrap2 1.3.6.1.4.1.14525.5.0.80
This trap is sent if a client roams from one location to another. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client, after roam; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client, after roam. Obsoletes trpzClientRoamingTrap.
     trpzClientIpAddrChangeTrap2 1.3.6.1.4.1.14525.5.0.81
This trap is sent when an IP address of a client changes. The most likely cases for this are when the client first connects to the network and when a new IPv6 global address is assigned to the client. The pair of objects trpzClientIpAddrType/trpzClientIpAddr indicates the type and the value of the new IP address. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientIpAddrChangeTrap.
     trpzClientDeAuthenticationTrap2 1.3.6.1.4.1.14525.5.0.82
This trap is sent if a client de-authentication occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDeAuthenticationTrap.
     trpzClientDynAuthorChangeSuccessTrap2 1.3.6.1.4.1.14525.5.0.83
This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDynAuthorChangeSuccessTrap.
     trpzClientDisconnectTrap2 1.3.6.1.4.1.14525.5.0.84
This trap is sent when a client session is terminated administratively. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDisconnectTrap.
     trpzClientClearedTrap3 1.3.6.1.4.1.14525.5.0.85
This trap is sent when a client session is cleared. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientClearedTrap, trpzClientClearedTrap2.
     trpzClientAuthorizationSuccessTrap5 1.3.6.1.4.1.14525.5.0.86
This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; trpzClientRadioType gives the type of radio used by this client. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientAuthorizationSuccessTrap, trpzClientAuthorizationSuccessTrap2, trpzClientAuthorizationSuccessTrap3, trpzClientAuthorizationSuccessTrap4.
     trpzClientDeviceTypeChangeTrap 1.3.6.1.4.1.14525.5.0.87
This trap is sent when the detected device type of a client changes. The new device type is indicated by trpzClientDeviceType. trpzClientDeviceGroup indicates the group that the new device type belongs to. As of release 8.0, device detection is done only for wireless clients (trpzClientAccessMode = 'ap').
     trpzClientDeviceProfileChangeTrap 1.3.6.1.4.1.14525.5.0.88
This trap is sent when the device profile for a client device changes. The new device profile is indicated by trpzClientDeviceProfileName. trpzClientDeviceProfileChangeReason indicates the reason why the device profile changed. As of release 8.0, device detection is done only for wireless clients (trpzClientAccessMode = 'ap').