TRANZEO-ENROUTE-MUNIWIFI-MIB: View SNMP OID List / Download MIB

VENDOR: SENSORIA CORPORATION


 Home MIB: TRANZEO-ENROUTE-MUNIWIFI-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 enRoute 1.3.6.1.4.1.24350
The Tranzeo EnRoute platform MIB.
             version 1.3.6.1.4.1.24350.1
                 versionDriver80211 1.3.6.1.4.1.24350.1.1 octet string read-only
80211 driver release version
                 versionFirmware 1.3.6.1.4.1.24350.1.2 octet string read-only
firmware release version
                 versionLoaded_profile 1.3.6.1.4.1.24350.1.3 octet string read-only
last mcm cfg-load or cfg-save profile
                 versionMcm 1.3.6.1.4.1.24350.1.4 octet string read-only
mcm version
                 versionPatches 1.3.6.1.4.1.24350.1.5 octet string read-only
applied patches
                 versionQos 1.3.6.1.4.1.24350.1.6 octet string read-only
QoS version
                 versionRelease 1.3.6.1.4.1.24350.1.7 octet string read-only
software release version
             sys 1.3.6.1.4.1.24350.2
                 sysApply 1.3.6.1.4.1.24350.2.1
                     sysApplyEffect 1.3.6.1.4.1.24350.2.1.1 octet string read-only
approximate severity of applying outstanding changes
                     sysApplyTime 1.3.6.1.4.1.24350.2.1.2 integer read-only
time in seconds to apply outstanding changes
                 sysDev 1.3.6.1.4.1.24350.2.2
                     sysDevBattery 1.3.6.1.4.1.24350.2.2.1
                         sysDevBatteryEnable 1.3.6.1.4.1.24350.2.2.1.1 octet string read-write
enable battery
                         sysDevBatteryInstalled 1.3.6.1.4.1.24350.2.2.1.2 octet string read-only
battery hardware could be installed
                     sysDevLed 1.3.6.1.4.1.24350.2.2.2
                         sysDevLedEnable 1.3.6.1.4.1.24350.2.2.2.1 octet string read-write
enable led display
                     sysDevPoe 1.3.6.1.4.1.24350.2.2.3
                         sysDevPoeEnable 1.3.6.1.4.1.24350.2.2.3.1 octet string read-write
supply power over ethernet
                         sysDevPoeInstalled 1.3.6.1.4.1.24350.2.2.3.2 octet string read-only
poe hardware is installed
                         sysDevPoeVoltage 1.3.6.1.4.1.24350.2.2.3.3 octet string read-write
power over ethernet voltage - 24 or 48
                     sysDevWlan 1.3.6.1.4.1.24350.2.2.4
                         sysDevWlanCountry 1.3.6.1.4.1.24350.2.2.4.1 integer read-write
ansi country code - 124=canada, 840=us, 826=uk
                 sysDhcp 1.3.6.1.4.1.24350.2.3
                     sysDhcpArgs 1.3.6.1.4.1.24350.2.3.1 octet string read-only
dhcp server arguments
                     sysDhcpEnableserver 1.3.6.1.4.1.24350.2.3.2 octet string read-write
enable dhcp server if any of the interfaces require it
                     sysDhcpRelay 1.3.6.1.4.1.24350.2.3.3
                         sysDhcpRelayAgent 1.3.6.1.4.1.24350.2.3.3.1
                             sysDhcpRelayAgentBase 1.3.6.1.4.1.24350.2.3.3.1.1 octet string read-write
base octet to use for alias VAP IP addresses
                         sysDhcpRelayArgs 1.3.6.1.4.1.24350.2.3.3.2 octet string read-write
roamd arguments except for -D and -a
                         sysDhcpRelayArpnumbc 1.3.6.1.4.1.24350.2.3.3.3 integer read-write
number of unsolicited arp broadcasts to establish ips
                         sysDhcpRelayBindretries 1.3.6.1.4.1.24350.2.3.3.4 integer read-write
number of interface bind attempts
                         sysDhcpRelayEnable 1.3.6.1.4.1.24350.2.3.3.5 octet string read-write
use remote dhcp server instead of local
                         sysDhcpRelayExtrahosts 1.3.6.1.4.1.24350.2.3.3.6 octet string read-write
space separated list of extra host ip addresses to consider external
                         sysDhcpRelayGateway 1.3.6.1.4.1.24350.2.3.3.7 octet string read-write
base address to use VAP IP addresses globally
                         sysDhcpRelayImr 1.3.6.1.4.1.24350.2.3.3.8
                             sysDhcpRelayImrNumbc 1.3.6.1.4.1.24350.2.3.3.8.1 integer read-write
notification broadcast count
                         sysDhcpRelayProxy 1.3.6.1.4.1.24350.2.3.3.9 octet string read-write
redirect all dhcp traffic to relay on gateway
                         sysDhcpRelayServer 1.3.6.1.4.1.24350.2.3.3.10 octet string read-write
numeric ip address of the external DHCP server
                         sysDhcpRelayStalecheckinterval 1.3.6.1.4.1.24350.2.3.3.11 integer read-write
check for stale route (seconds)
                         sysDhcpRelayStatic 1.3.6.1.4.1.24350.2.3.3.12
                               sysDhcpRelayStaticBegin 1.3.6.1.4.1.24350.2.3.3.12.1 octet string read-write
beginning of statif ip range
                               sysDhcpRelayStaticEnable 1.3.6.1.4.1.24350.2.3.3.12.2 octet string read-write
allow static allocation range
                               sysDhcpRelayStaticEnd 1.3.6.1.4.1.24350.2.3.3.12.3 octet string read-write
end of static ip range
                         sysDhcpRelaySubnet 1.3.6.1.4.1.24350.2.3.3.13 octet string read-write
subnet for roamd
                         sysDhcpRelayTunnel 1.3.6.1.4.1.24350.2.3.3.14
                               sysDhcpRelayTunnelEndpoint 1.3.6.1.4.1.24350.2.3.3.14.1 octet string read-write
tunnel subnet for roamd
                               sysDhcpRelayTunnelKeepalive 1.3.6.1.4.1.24350.2.3.3.14.2 integer read-write
tunnel keepalive interval in seconds
                               sysDhcpRelayTunnelTimeoutfactor 1.3.6.1.4.1.24350.2.3.3.14.3 integer read-write
tunnel timeout factor
                 sysDns 1.3.6.1.4.1.24350.2.4
                     sysDnsServers 1.3.6.1.4.1.24350.2.4.1 octet string read-write
space separated DNS server list
                     sysDnsUpdatestyle 1.3.6.1.4.1.24350.2.4.2 octet string read-write
dns update style ('ad-hoc', 'interim', 'none' )
                 sysDnsproxy 1.3.6.1.4.1.24350.2.5
                     sysDnsproxyEnable 1.3.6.1.4.1.24350.2.5.1 octet string read-write
enable dns proxy
                     sysDnsproxyHosts 1.3.6.1.4.1.24350.2.5.2 octet string read-write
=;=; (etc)
                 sysDomain 1.3.6.1.4.1.24350.2.6 octet string read-write
domain for this node
                 sysGui 1.3.6.1.4.1.24350.2.7
                     sysGuiUpgrade 1.3.6.1.4.1.24350.2.7.1
                         sysGuiUpgradeForce 1.3.6.1.4.1.24350.2.7.1.1 octet string read-write
gui defaults to forcing upgrade
                 sysHostname 1.3.6.1.4.1.24350.2.8 octet string read-write
hostname (also set if you change id.node)
                 sysHosts 1.3.6.1.4.1.24350.2.9
                     sysHostsNms 1.3.6.1.4.1.24350.2.9.1 octet string read-write
hostname or ip address of the network management station (snmp)
                 sysId 1.3.6.1.4.1.24350.2.10
                       sysIdLanprefix 1.3.6.1.4.1.24350.2.10.1 octet string read-write
first octet for non-mesh interfaces
                       sysIdMesh 1.3.6.1.4.1.24350.2.10.2 octet string read-write
3rd mesh octet (2nd octet for other interfaces in implicit mode)
                       sysIdMeshprefix 1.3.6.1.4.1.24350.2.10.3 octet string read-write
first two octets for mesh
                       sysIdNode 1.3.6.1.4.1.24350.2.10.4 octet string read-write
4th mesh octet (3rd octet for other interfaces in implicit mode)
                 sysImplicit 1.3.6.1.4.1.24350.2.11
                       sysImplicitEnable 1.3.6.1.4.1.24350.2.11.1 octet string read-write
use implicit addressing scheme - limits ap ranges
                 sysInfo 1.3.6.1.4.1.24350.2.12
                       sysInfoCluster 1.3.6.1.4.1.24350.2.12.1 octet string read-write
freeform string which will be displayed on web pages
                 sysL2 1.3.6.1.4.1.24350.2.13
                       sysL2Bridge 1.3.6.1.4.1.24350.2.13.1
                           sysL2BridgeEnable 1.3.6.1.4.1.24350.2.13.1.1 octet string read-write
enable level 2 bridge mode
                       sysL2Clientmacfwd 1.3.6.1.4.1.24350.2.13.2 octet string read-write
preserve client source mac to gateway and enable gateway proxy_arp
                       sysL2Hideinternal 1.3.6.1.4.1.24350.2.13.3
                           sysL2HideinternalEnable 1.3.6.1.4.1.24350.2.13.3.1 octet string read-write
hide internal subnets from proxy arps
                           sysL2HideinternalGateway 1.3.6.1.4.1.24350.2.13.3.2
                               sysL2HideinternalGatewayAllow 1.3.6.1.4.1.24350.2.13.3.2.1
                                   sysL2HideinternalGatewayAllowRelaydhcp 1.3.6.1.4.1.24350.2.13.3.2.1.1 octet string read-write
arp for dhcp relay subnet
                               sysL2HideinternalGatewayDeny 1.3.6.1.4.1.24350.2.13.3.2.2
                                   sysL2HideinternalGatewayDenyAll 1.3.6.1.4.1.24350.2.13.3.2.2.1 octet string read-write
deny all proxy arps from gateway, unless .allowed
                                   sysL2HideinternalGatewayDenyMesh 1.3.6.1.4.1.24350.2.13.3.2.2.2 octet string read-write
hide mesh from proxy arp
                 sysLocation 1.3.6.1.4.1.24350.2.14
                       sysLocationGps 1.3.6.1.4.1.24350.2.14.1
                           sysLocationGpsAltitude 1.3.6.1.4.1.24350.2.14.1.1 octet string read-write
gps altitude in meters
                           sysLocationGpsLatitude 1.3.6.1.4.1.24350.2.14.1.2 octet string read-write
gps latitude in decimal degrees
                           sysLocationGpsLongitude 1.3.6.1.4.1.24350.2.14.1.3 octet string read-write
gps longitude in decimal degrees
                       sysLocationPostal 1.3.6.1.4.1.24350.2.14.2 octet string read-write
useful description of node's physical location
                 sysMainstub 1.3.6.1.4.1.24350.2.15
                       sysMainstubIf 1.3.6.1.4.1.24350.2.15.1 octet string read-write
interface to multicast network
                       sysMainstubProxyarp 1.3.6.1.4.1.24350.2.15.2 octet string read-write
proxy arp on multicast interface?
                 sysMonitor 1.3.6.1.4.1.24350.2.16
                       sysMonitorHealth 1.3.6.1.4.1.24350.2.16.1
                           sysMonitorHealthEnable 1.3.6.1.4.1.24350.2.16.1.1 octet string read-write
enable health monitoring for gateway failover
                           sysMonitorHealthHost 1.3.6.1.4.1.24350.2.16.1.2 octet string read-write
host to ping
                 sysNat 1.3.6.1.4.1.24350.2.17
                       sysNatEnable 1.3.6.1.4.1.24350.2.17.1 octet string read-write
masquerading (on eth0, if gateway)
                 sysNetbios 1.3.6.1.4.1.24350.2.18
                       sysNetbiosServers 1.3.6.1.4.1.24350.2.18.1 octet string read-write
space separated netbios server list
                 sysNets 1.3.6.1.4.1.24350.2.19
                       sysNetsExternal 1.3.6.1.4.1.24350.2.19.1
                           sysNetsExternalCombined 1.3.6.1.4.1.24350.2.19.1.1 octet string read-only
coalesced .external.default, external.roamd, and .external.extra subnets
                           sysNetsExternalDefault 1.3.6.1.4.1.24350.2.19.1.2 octet string read-only
subnets considered external to the mesh by default
                           sysNetsExternalExtra 1.3.6.1.4.1.24350.2.19.1.3 octet string read-write
extra subnets to be considered external to the mesh
                       sysNetsInternal 1.3.6.1.4.1.24350.2.19.2
                           sysNetsInternalCombined 1.3.6.1.4.1.24350.2.19.2.1 octet string read-only
coalesced .internal.default and internal.extra internal subnets
                           sysNetsInternalDefault 1.3.6.1.4.1.24350.2.19.2.2 octet string read-only
default mesh-internal subnets
                           sysNetsInternalExtra 1.3.6.1.4.1.24350.2.19.2.3 octet string read-write
added to .default internal subnets
                           sysNetsInternalFlexipdefault 1.3.6.1.4.1.24350.2.19.2.4 octet string read-write
override the .nets.internal.default for flexip
                 sysOrganization 1.3.6.1.4.1.24350.2.20
                       sysOrganizationCity 1.3.6.1.4.1.24350.2.20.1 octet string read-write
city or locality
                       sysOrganizationCountry 1.3.6.1.4.1.24350.2.20.2 octet string read-write
2 letter country code
                       sysOrganizationName 1.3.6.1.4.1.24350.2.20.3 octet string read-write
organization name
                       sysOrganizationState 1.3.6.1.4.1.24350.2.20.4 octet string read-write
state or province
                 sysPassword 1.3.6.1.4.1.24350.2.21
                       sysPasswordAdmin 1.3.6.1.4.1.24350.2.21.1 octet string read-write
admin account password
                       sysPasswordMonitor 1.3.6.1.4.1.24350.2.21.2 octet string read-write
monitor account password
                 sysPlatform 1.3.6.1.4.1.24350.2.22 octet string read-only
hardware platform
                 sysProvisioning 1.3.6.1.4.1.24350.2.23
                       sysProvisioningEnable 1.3.6.1.4.1.24350.2.23.1 octet string read-write
enable OnRamp provisioning
                 sysRouting 1.3.6.1.4.1.24350.2.24
                       sysRoutingOspf 1.3.6.1.4.1.24350.2.24.1 octet string read-write
enable OSPF dynamic routing
                       sysRoutingRip 1.3.6.1.4.1.24350.2.24.2 octet string read-write
enable RIP dynamic routing
                 sysScheme 1.3.6.1.4.1.24350.2.25 octet string read-write
wireless node type
                 sysShell 1.3.6.1.4.1.24350.2.26
                       sysShellTimeout 1.3.6.1.4.1.24350.2.26.1 integer read-write
shell inactivity timeout
                 sysSnmp 1.3.6.1.4.1.24350.2.27
                       sysSnmpCommunity 1.3.6.1.4.1.24350.2.27.1
                           sysSnmpCommunityRo 1.3.6.1.4.1.24350.2.27.1.1 octet string read-write
ro community password
                           sysSnmpCommunityRw 1.3.6.1.4.1.24350.2.27.1.2 octet string read-write
rw community password
                           sysSnmpCommunityTrap 1.3.6.1.4.1.24350.2.27.1.3 octet string read-write
trap community password
                       sysSnmpContact 1.3.6.1.4.1.24350.2.27.2 octet string read-write
snmp contact
                       sysSnmpLocation 1.3.6.1.4.1.24350.2.27.3 octet string read-write
location (taken from sys.location.postal)
                       sysSnmpPort 1.3.6.1.4.1.24350.2.27.4 integer read-write
snmp port
                       sysSnmpTrap 1.3.6.1.4.1.24350.2.27.5
                           sysSnmpTrapHost 1.3.6.1.4.1.24350.2.27.5.1 octet string read-write
trap host (trapsink)
                 sysSplash 1.3.6.1.4.1.24350.2.28
                       sysSplashAuth 1.3.6.1.4.1.24350.2.28.1
                           sysSplashAuthServer 1.3.6.1.4.1.24350.2.28.1.1
                               sysSplashAuthServerWlan1 1.3.6.1.4.1.24350.2.28.1.1.1
                                   sysSplashAuthServerWlan1Enable 1.3.6.1.4.1.24350.2.28.1.1.1.1 octet string read-write
require authentication
                                   sysSplashAuthServerWlan1Host 1.3.6.1.4.1.24350.2.28.1.1.1.2 octet string read-write
host for remote radius authentication
                                   sysSplashAuthServerWlan1Port 1.3.6.1.4.1.24350.2.28.1.1.1.3 integer read-write
port for remote radius authentication
                                   sysSplashAuthServerWlan1Secret 1.3.6.1.4.1.24350.2.28.1.1.1.4 octet string read-write
shared secret for remote radius authentication
                               sysSplashAuthServerWlan2 1.3.6.1.4.1.24350.2.28.1.1.2
                                   sysSplashAuthServerWlan2Enable 1.3.6.1.4.1.24350.2.28.1.1.2.1 octet string read-write
require authentication
                                   sysSplashAuthServerWlan2Host 1.3.6.1.4.1.24350.2.28.1.1.2.2 octet string read-write
host for remote radius authentication
                                   sysSplashAuthServerWlan2Port 1.3.6.1.4.1.24350.2.28.1.1.2.3 integer read-write
port for remote radius authentication
                                   sysSplashAuthServerWlan2Secret 1.3.6.1.4.1.24350.2.28.1.1.2.4 octet string read-write
shared secret for remote radius authentication
                               sysSplashAuthServerWlan3 1.3.6.1.4.1.24350.2.28.1.1.3
                                   sysSplashAuthServerWlan3Enable 1.3.6.1.4.1.24350.2.28.1.1.3.1 octet string read-write
require authentication
                                   sysSplashAuthServerWlan3Host 1.3.6.1.4.1.24350.2.28.1.1.3.2 octet string read-write
host for remote radius authentication
                                   sysSplashAuthServerWlan3Port 1.3.6.1.4.1.24350.2.28.1.1.3.3 integer read-write
port for remote radius authentication
                                   sysSplashAuthServerWlan3Secret 1.3.6.1.4.1.24350.2.28.1.1.3.4 octet string read-write
shared secret for remote radius authentication
                               sysSplashAuthServerWlan4 1.3.6.1.4.1.24350.2.28.1.1.4
                                   sysSplashAuthServerWlan4Enable 1.3.6.1.4.1.24350.2.28.1.1.4.1 octet string read-write
require authentication
                                   sysSplashAuthServerWlan4Host 1.3.6.1.4.1.24350.2.28.1.1.4.2 octet string read-write
host for remote radius authentication
                                   sysSplashAuthServerWlan4Port 1.3.6.1.4.1.24350.2.28.1.1.4.3 integer read-write
port for remote radius authentication
                                   sysSplashAuthServerWlan4Secret 1.3.6.1.4.1.24350.2.28.1.1.4.4 octet string read-write
shared secret for remote radius authentication
                       sysSplashBypasshosts 1.3.6.1.4.1.24350.2.28.2 octet string read-write
comma separated list of hosts to bypass sign in
                       sysSplashEnable 1.3.6.1.4.1.24350.2.28.3
                           sysSplashEnableWlan1 1.3.6.1.4.1.24350.2.28.3.1 octet string read-write
enable splash screen for wlan1
                           sysSplashEnableWlan2 1.3.6.1.4.1.24350.2.28.3.2 octet string read-write
enable splash screen for wlan2
                           sysSplashEnableWlan3 1.3.6.1.4.1.24350.2.28.3.3 octet string read-write
enable splash screen for wlan3
                           sysSplashEnableWlan4 1.3.6.1.4.1.24350.2.28.3.4 octet string read-write
enable splash screen for wlan4
                       sysSplashExternal 1.3.6.1.4.1.24350.2.28.4 octet string read-write
external network device, set by sys.scheme
                       sysSplashInternal 1.3.6.1.4.1.24350.2.28.5 octet string read-only
internal network devices, set by sys.scheme
                       sysSplashTrustedmacs 1.3.6.1.4.1.24350.2.28.6 octet string read-write
comma separated list of mac addresses than can pass
                       sysSplashUrl 1.3.6.1.4.1.24350.2.28.7
                           sysSplashUrlWlan1 1.3.6.1.4.1.24350.2.28.7.1
                               sysSplashUrlWlan1Error 1.3.6.1.4.1.24350.2.28.7.1.1 octet string read-write
full url to page shown on login (internal) error
                               sysSplashUrlWlan1Fail 1.3.6.1.4.1.24350.2.28.7.1.2 octet string read-write
full url to page shown on failed login
                               sysSplashUrlWlan1Login 1.3.6.1.4.1.24350.2.28.7.1.3 octet string read-write
full url to desired login page
                               sysSplashUrlWlan1Success 1.3.6.1.4.1.24350.2.28.7.1.4 octet string read-write
full url to page shown on successful login
                           sysSplashUrlWlan2 1.3.6.1.4.1.24350.2.28.7.2
                               sysSplashUrlWlan2Error 1.3.6.1.4.1.24350.2.28.7.2.1 octet string read-write
full url to page shown on login (internal) error
                               sysSplashUrlWlan2Fail 1.3.6.1.4.1.24350.2.28.7.2.2 octet string read-write
full url to page shown on failed login
                               sysSplashUrlWlan2Login 1.3.6.1.4.1.24350.2.28.7.2.3 octet string read-write
full url to desired login page
                               sysSplashUrlWlan2Success 1.3.6.1.4.1.24350.2.28.7.2.4 octet string read-write
full url to page shown on successful login
                           sysSplashUrlWlan3 1.3.6.1.4.1.24350.2.28.7.3
                               sysSplashUrlWlan3Error 1.3.6.1.4.1.24350.2.28.7.3.1 octet string read-write
full url to page shown on login (internal) error
                               sysSplashUrlWlan3Fail 1.3.6.1.4.1.24350.2.28.7.3.2 octet string read-write
full url to page shown on failed login
                               sysSplashUrlWlan3Login 1.3.6.1.4.1.24350.2.28.7.3.3 octet string read-write
full url to desired login page
                               sysSplashUrlWlan3Success 1.3.6.1.4.1.24350.2.28.7.3.4 octet string read-write
full url to page shown on successful login
                           sysSplashUrlWlan4 1.3.6.1.4.1.24350.2.28.7.4
                               sysSplashUrlWlan4Error 1.3.6.1.4.1.24350.2.28.7.4.1 octet string read-write
full url to page shown on login (internal) error
                               sysSplashUrlWlan4Fail 1.3.6.1.4.1.24350.2.28.7.4.2 octet string read-write
full url to page shown on failed login
                               sysSplashUrlWlan4Login 1.3.6.1.4.1.24350.2.28.7.4.3 octet string read-write
full url to desired login page
                               sysSplashUrlWlan4Success 1.3.6.1.4.1.24350.2.28.7.4.4 octet string read-write
full url to page shown on successful login
                 sysTime 1.3.6.1.4.1.24350.2.29
                       sysTimeRfc868 1.3.6.1.4.1.24350.2.29.1
                           sysTimeRfc868Server 1.3.6.1.4.1.24350.2.29.1.1 octet string read-write
RFC868 time server name or address for gateway nodes
                       sysTimeSyncdelay 1.3.6.1.4.1.24350.2.29.2 integer read-write
how many seconds repeaters should delay syncing to gateway
                 sysUnits 1.3.6.1.4.1.24350.2.30 octet string read-write
imperial (feet) or metric (meters)
             firewall 1.3.6.1.4.1.24350.3
                 firewallConntrack 1.3.6.1.4.1.24350.3.1
                     firewallConntrackConnlimit 1.3.6.1.4.1.24350.3.1.1
                         firewallConntrackConnlimitConnections 1.3.6.1.4.1.24350.3.1.1.1 integer read-write
number of connections allowed per client
                         firewallConntrackConnlimitEnable 1.3.6.1.4.1.24350.3.1.1.2 octet string read-write
limit the number of tcp connections per client
                     firewallConntrackTablesize 1.3.6.1.4.1.24350.3.1.2 integer read-write
size of connection tracking table
                     firewallConntrackTcptimeoutestablished 1.3.6.1.4.1.24350.3.1.3 integer read-write
tcp connections completely idle this many seconds can be dropped
                 firewallGateway 1.3.6.1.4.1.24350.3.2
                     firewallGatewayEnable 1.3.6.1.4.1.24350.3.2.1 octet string read-write
prevent incoming connections past gateway node
                 firewallNode 1.3.6.1.4.1.24350.3.3
                     firewallNodeAllowc2c 1.3.6.1.4.1.24350.3.3.1
                         firewallNodeAllowc2cEth0 1.3.6.1.4.1.24350.3.3.1.1 octet string read-write
allow clients to see each other if eth0.role=access
                         firewallNodeAllowc2cWlan1 1.3.6.1.4.1.24350.3.3.1.2 octet string read-write
allow clients to see each other if wlan1.role=access
                         firewallNodeAllowc2cWlan2 1.3.6.1.4.1.24350.3.3.1.3 octet string read-write
allow clients to see each other if wlan2.role=access
                         firewallNodeAllowc2cWlan3 1.3.6.1.4.1.24350.3.3.1.4 octet string read-write
allow clients to see each other if wlan3.role=access
                         firewallNodeAllowc2cWlan4 1.3.6.1.4.1.24350.3.3.1.5 octet string read-write
allow clients to see each other if wlan4.role=access
                     firewallNodeEnable 1.3.6.1.4.1.24350.3.3.2 octet string read-write
enable firewall on the node
                     firewallNodeTcp 1.3.6.1.4.1.24350.3.3.3
                         firewallNodeTcpAllow 1.3.6.1.4.1.24350.3.3.3.1
                             firewallNodeTcpAllowDest 1.3.6.1.4.1.24350.3.3.3.1.1 octet string read-write
tcp dest ports (space separated) to allow to this node
                             firewallNodeTcpAllowSource 1.3.6.1.4.1.24350.3.3.3.1.2 octet string read-write
tcp source ports (space separated) to allow to this node
                     firewallNodeUdp 1.3.6.1.4.1.24350.3.3.4
                         firewallNodeUdpAllow 1.3.6.1.4.1.24350.3.3.4.1
                             firewallNodeUdpAllowDest 1.3.6.1.4.1.24350.3.3.4.1.1 octet string read-write
udp dest ports (space separated) to allow to this node
                             firewallNodeUdpAllowSource 1.3.6.1.4.1.24350.3.3.4.1.2 octet string read-write
udp source ports (space separated) to allow to this node
             qos 1.3.6.1.4.1.24350.4
                 qosEnable 1.3.6.1.4.1.24350.4.1 octet string read-write
qos enabled? if not, nothing else here matters.
                 qosExtra 1.3.6.1.4.1.24350.4.2 octet string read-write
space separated list of extra = qos values
                 qosIn 1.3.6.1.4.1.24350.4.3
                     qosInDefault 1.3.6.1.4.1.24350.4.3.1
                         qosInDefaultFlowpriority 1.3.6.1.4.1.24350.4.3.1.1 octet string read-write
input flow priority 0-99 or 'inherit' (higher is higher priority)
                         qosInDefaultHwpri 1.3.6.1.4.1.24350.4.3.1.2
                             qosInDefaultHwpriMax 1.3.6.1.4.1.24350.4.3.1.2.1 octet string read-write
max hardware priority on output (1-4, 0 for default, or 'inherit')
                             qosInDefaultHwpriMin 1.3.6.1.4.1.24350.4.3.1.2.2 octet string read-write
min hardware priority on output (1-4, 0 for default, or 'inherit')
                     qosInEth0 1.3.6.1.4.1.24350.4.3.2
                         qosInEth0Flowpriority 1.3.6.1.4.1.24350.4.3.2.1 octet string read-write
input flow priority 0-99 or 'inherit' (higher is higher priority)
                         qosInEth0Hwpri 1.3.6.1.4.1.24350.4.3.2.2
                             qosInEth0HwpriMax 1.3.6.1.4.1.24350.4.3.2.2.1 octet string read-write
max hardware priority on output (1-4, 0 for default, or 'inherit')
                             qosInEth0HwpriMin 1.3.6.1.4.1.24350.4.3.2.2.2 octet string read-write
min hardware priority on output (1-4, 0 for default, or 'inherit')
                     qosInLocal 1.3.6.1.4.1.24350.4.3.3
                         qosInLocalFlowpriority 1.3.6.1.4.1.24350.4.3.3.1 octet string read-write
input flow priority 0-99 or 'inherit' (higher is higher priority)
                         qosInLocalHwpri 1.3.6.1.4.1.24350.4.3.3.2
                             qosInLocalHwpriMax 1.3.6.1.4.1.24350.4.3.3.2.1 octet string read-write
max hardware priority on output (1-4, 0 for default, or 'inherit')
                             qosInLocalHwpriMin 1.3.6.1.4.1.24350.4.3.3.2.2 octet string read-write
min hardware priority on output (1-4, 0 for default, or 'inherit')
                     qosInWlan0 1.3.6.1.4.1.24350.4.3.4
                         qosInWlan0Flowpriority 1.3.6.1.4.1.24350.4.3.4.1 octet string read-write
input flow priority 0-99 or 'inherit' (higher is higher priority)
                         qosInWlan0Hwpri 1.3.6.1.4.1.24350.4.3.4.2
                             qosInWlan0HwpriMax 1.3.6.1.4.1.24350.4.3.4.2.1 octet string read-write
max hardware priority on output (1-4, 0 for default, or 'inherit')
                             qosInWlan0HwpriMin 1.3.6.1.4.1.24350.4.3.4.2.2 octet string read-write
min hardware priority on output (1-4, 0 for default, or 'inherit')
                     qosInWlan1 1.3.6.1.4.1.24350.4.3.5
                         qosInWlan1Flowpriority 1.3.6.1.4.1.24350.4.3.5.1 octet string read-write
input flow priority 0-99 or 'inherit' (higher is higher priority)
                         qosInWlan1Hwpri 1.3.6.1.4.1.24350.4.3.5.2
                             qosInWlan1HwpriMax 1.3.6.1.4.1.24350.4.3.5.2.1 octet string read-write
max hardware priority on output (1-4, 0 for default, or 'inherit')
                             qosInWlan1HwpriMin 1.3.6.1.4.1.24350.4.3.5.2.2 octet string read-write
min hardware priority on output (1-4, 0 for default, or 'inherit')
                     qosInWlan2 1.3.6.1.4.1.24350.4.3.6
                         qosInWlan2Flowpriority 1.3.6.1.4.1.24350.4.3.6.1 octet string read-write
input flow priority 0-99 or 'inherit' (higher is higher priority)
                         qosInWlan2Hwpri 1.3.6.1.4.1.24350.4.3.6.2
                             qosInWlan2HwpriMax 1.3.6.1.4.1.24350.4.3.6.2.1 octet string read-write
max hardware priority on output (1-4, 0 for default, or 'inherit')
                             qosInWlan2HwpriMin 1.3.6.1.4.1.24350.4.3.6.2.2 octet string read-write
min hardware priority on output (1-4, 0 for default, or 'inherit')
                     qosInWlan3 1.3.6.1.4.1.24350.4.3.7
                         qosInWlan3Flowpriority 1.3.6.1.4.1.24350.4.3.7.1 octet string read-write
input flow priority 0-99 or 'inherit' (higher is higher priority)
                         qosInWlan3Hwpri 1.3.6.1.4.1.24350.4.3.7.2
                             qosInWlan3HwpriMax 1.3.6.1.4.1.24350.4.3.7.2.1 octet string read-write
max hardware priority on output (1-4, 0 for default, or 'inherit')
                             qosInWlan3HwpriMin 1.3.6.1.4.1.24350.4.3.7.2.2 octet string read-write
min hardware priority on output (1-4, 0 for default, or 'inherit')
                     qosInWlan4 1.3.6.1.4.1.24350.4.3.8
                         qosInWlan4Flowpriority 1.3.6.1.4.1.24350.4.3.8.1 octet string read-write
input flow priority 0-99 or 'inherit' (higher is higher priority)
                         qosInWlan4Hwpri 1.3.6.1.4.1.24350.4.3.8.2
                             qosInWlan4HwpriMax 1.3.6.1.4.1.24350.4.3.8.2.1 octet string read-write
max hardware priority on output (1-4, 0 for default, or 'inherit')
                             qosInWlan4HwpriMin 1.3.6.1.4.1.24350.4.3.8.2.2 octet string read-write
min hardware priority on output (1-4, 0 for default, or 'inherit')
                 qosOut 1.3.6.1.4.1.24350.4.4
                     qosOutDefault 1.3.6.1.4.1.24350.4.4.1
                         qosOutDefaultDefault 1.3.6.1.4.1.24350.4.4.1.1
                             qosOutDefaultDefaultLimit 1.3.6.1.4.1.24350.4.4.1.1.1 octet string read-write
max bw for all data coming from default
                             qosOutDefaultDefaultReserve 1.3.6.1.4.1.24350.4.4.1.1.2 octet string read-write
reserved bw for all data coming from default
                         qosOutDefaultEth0 1.3.6.1.4.1.24350.4.4.1.2
                             qosOutDefaultEth0Limit 1.3.6.1.4.1.24350.4.4.1.2.1 octet string read-write
max bw for all data coming from eth0
                             qosOutDefaultEth0Reserve 1.3.6.1.4.1.24350.4.4.1.2.2 octet string read-write
reserved bw for all data coming from eth0
                         qosOutDefaultLimit 1.3.6.1.4.1.24350.4.4.1.3 octet string read-write
limit total output rate. *if blank, no other rates are used*
                         qosOutDefaultLocal 1.3.6.1.4.1.24350.4.4.1.4
                             qosOutDefaultLocalLimit 1.3.6.1.4.1.24350.4.4.1.4.1 octet string read-write
max bw for all data coming from local
                             qosOutDefaultLocalReserve 1.3.6.1.4.1.24350.4.4.1.4.2 octet string read-write
reserved bw for all data coming from local
                         qosOutDefaultWlan0 1.3.6.1.4.1.24350.4.4.1.5
                             qosOutDefaultWlan0Limit 1.3.6.1.4.1.24350.4.4.1.5.1 octet string read-write
max bw for all data coming from wlan0
                             qosOutDefaultWlan0Reserve 1.3.6.1.4.1.24350.4.4.1.5.2 octet string read-write
reserved bw for all data coming from wlan0
                         qosOutDefaultWlan1 1.3.6.1.4.1.24350.4.4.1.6
                             qosOutDefaultWlan1Limit 1.3.6.1.4.1.24350.4.4.1.6.1 octet string read-write
max bw for all data coming from wlan1
                             qosOutDefaultWlan1Reserve 1.3.6.1.4.1.24350.4.4.1.6.2 octet string read-write
reserved bw for all data coming from wlan1
                         qosOutDefaultWlan2 1.3.6.1.4.1.24350.4.4.1.7
                             qosOutDefaultWlan2Limit 1.3.6.1.4.1.24350.4.4.1.7.1 octet string read-write
max bw for all data coming from wlan2
                             qosOutDefaultWlan2Reserve 1.3.6.1.4.1.24350.4.4.1.7.2 octet string read-write
reserved bw for all data coming from wlan2
                         qosOutDefaultWlan3 1.3.6.1.4.1.24350.4.4.1.8
                             qosOutDefaultWlan3Limit 1.3.6.1.4.1.24350.4.4.1.8.1 octet string read-write
max bw for all data coming from wlan3
                             qosOutDefaultWlan3Reserve 1.3.6.1.4.1.24350.4.4.1.8.2 octet string read-write
reserved bw for all data coming from wlan3
                         qosOutDefaultWlan4 1.3.6.1.4.1.24350.4.4.1.9
                             qosOutDefaultWlan4Limit 1.3.6.1.4.1.24350.4.4.1.9.1 octet string read-write
max bw for all data coming from wlan4
                             qosOutDefaultWlan4Reserve 1.3.6.1.4.1.24350.4.4.1.9.2 octet string read-write
reserved bw for all data coming from wlan4
                     qosOutWlan0 1.3.6.1.4.1.24350.4.4.2
                         qosOutWlan0Default 1.3.6.1.4.1.24350.4.4.2.1
                             qosOutWlan0DefaultBe 1.3.6.1.4.1.24350.4.4.2.1.1
                                 qosOutWlan0DefaultBeLimit 1.3.6.1.4.1.24350.4.4.2.1.1.1 octet string read-write
max bw for BE data coming from default
                                 qosOutWlan0DefaultBeReserve 1.3.6.1.4.1.24350.4.4.2.1.1.2 octet string read-write
reserved bw for BE data coming from default
                             qosOutWlan0DefaultBk 1.3.6.1.4.1.24350.4.4.2.1.2
                                 qosOutWlan0DefaultBkLimit 1.3.6.1.4.1.24350.4.4.2.1.2.1 octet string read-write
max bw for BK data coming from default
                                 qosOutWlan0DefaultBkReserve 1.3.6.1.4.1.24350.4.4.2.1.2.2 octet string read-write
reserved bw for BK data coming from default
                             qosOutWlan0DefaultLimit 1.3.6.1.4.1.24350.4.4.2.1.3 octet string read-write
max bw for all data coming from default
                             qosOutWlan0DefaultReserve 1.3.6.1.4.1.24350.4.4.2.1.4 octet string read-write
reserved bw for all data coming from default
                             qosOutWlan0DefaultVi 1.3.6.1.4.1.24350.4.4.2.1.5
                                 qosOutWlan0DefaultViLimit 1.3.6.1.4.1.24350.4.4.2.1.5.1 octet string read-write
max bw for VI data coming from default
                                 qosOutWlan0DefaultViReserve 1.3.6.1.4.1.24350.4.4.2.1.5.2 octet string read-write
reserved bw for VI data coming from default
                             qosOutWlan0DefaultVo 1.3.6.1.4.1.24350.4.4.2.1.6
                                 qosOutWlan0DefaultVoLimit 1.3.6.1.4.1.24350.4.4.2.1.6.1 octet string read-write
max bw for VO data coming from default
                                 qosOutWlan0DefaultVoReserve 1.3.6.1.4.1.24350.4.4.2.1.6.2 octet string read-write
reserved bw for VO data coming from default
                         qosOutWlan0Eth0 1.3.6.1.4.1.24350.4.4.2.2
                             qosOutWlan0Eth0Be 1.3.6.1.4.1.24350.4.4.2.2.1
                                 qosOutWlan0Eth0BeLimit 1.3.6.1.4.1.24350.4.4.2.2.1.1 octet string read-write
max bw for BE data coming from eth0
                                 qosOutWlan0Eth0BeReserve 1.3.6.1.4.1.24350.4.4.2.2.1.2 octet string read-write
reserved bw for BE data coming from eth0
                             qosOutWlan0Eth0Bk 1.3.6.1.4.1.24350.4.4.2.2.2
                                 qosOutWlan0Eth0BkLimit 1.3.6.1.4.1.24350.4.4.2.2.2.1 octet string read-write
max bw for BK data coming from eth0
                                 qosOutWlan0Eth0BkReserve 1.3.6.1.4.1.24350.4.4.2.2.2.2 octet string read-write
reserved bw for BK data coming from eth0
                             qosOutWlan0Eth0Limit 1.3.6.1.4.1.24350.4.4.2.2.3 octet string read-write
max bw for all data coming from eth0
                             qosOutWlan0Eth0Reserve 1.3.6.1.4.1.24350.4.4.2.2.4 octet string read-write
reserved bw for all data coming from eth0
                             qosOutWlan0Eth0Vi 1.3.6.1.4.1.24350.4.4.2.2.5
                                 qosOutWlan0Eth0ViLimit 1.3.6.1.4.1.24350.4.4.2.2.5.1 octet string read-write
max bw for VI data coming from eth0
                                 qosOutWlan0Eth0ViReserve 1.3.6.1.4.1.24350.4.4.2.2.5.2 octet string read-write
reserved bw for VI data coming from eth0
                             qosOutWlan0Eth0Vo 1.3.6.1.4.1.24350.4.4.2.2.6
                                 qosOutWlan0Eth0VoLimit 1.3.6.1.4.1.24350.4.4.2.2.6.1 octet string read-write
max bw for VO data coming from eth0
                                 qosOutWlan0Eth0VoReserve 1.3.6.1.4.1.24350.4.4.2.2.6.2 octet string read-write
reserved bw for VO data coming from eth0
                         qosOutWlan0Limit 1.3.6.1.4.1.24350.4.4.2.3 octet string read-write
limit total output rate. *if blank, no other rates are used*
                         qosOutWlan0Local 1.3.6.1.4.1.24350.4.4.2.4
                             qosOutWlan0LocalBe 1.3.6.1.4.1.24350.4.4.2.4.1
                                 qosOutWlan0LocalBeLimit 1.3.6.1.4.1.24350.4.4.2.4.1.1 octet string read-write
max bw for BE data coming from local
                                 qosOutWlan0LocalBeReserve 1.3.6.1.4.1.24350.4.4.2.4.1.2 octet string read-write
reserved bw for BE data coming from local
                             qosOutWlan0LocalBk 1.3.6.1.4.1.24350.4.4.2.4.2
                                 qosOutWlan0LocalBkLimit 1.3.6.1.4.1.24350.4.4.2.4.2.1 octet string read-write
max bw for BK data coming from local
                                 qosOutWlan0LocalBkReserve 1.3.6.1.4.1.24350.4.4.2.4.2.2 octet string read-write
reserved bw for BK data coming from local
                             qosOutWlan0LocalLimit 1.3.6.1.4.1.24350.4.4.2.4.3 octet string read-write
max bw for all data coming from local
                             qosOutWlan0LocalReserve 1.3.6.1.4.1.24350.4.4.2.4.4 octet string read-write
reserved bw for all data coming from local
                             qosOutWlan0LocalVi 1.3.6.1.4.1.24350.4.4.2.4.5
                                 qosOutWlan0LocalViLimit 1.3.6.1.4.1.24350.4.4.2.4.5.1 octet string read-write
max bw for VI data coming from local
                                 qosOutWlan0LocalViReserve 1.3.6.1.4.1.24350.4.4.2.4.5.2 octet string read-write
reserved bw for VI data coming from local
                             qosOutWlan0LocalVo 1.3.6.1.4.1.24350.4.4.2.4.6
                                 qosOutWlan0LocalVoLimit 1.3.6.1.4.1.24350.4.4.2.4.6.1 octet string read-write
max bw for VO data coming from local
                                 qosOutWlan0LocalVoReserve 1.3.6.1.4.1.24350.4.4.2.4.6.2 octet string read-write
reserved bw for VO data coming from local
                         qosOutWlan0Wlan0 1.3.6.1.4.1.24350.4.4.2.5
                             qosOutWlan0Wlan0Be 1.3.6.1.4.1.24350.4.4.2.5.1
                                 qosOutWlan0Wlan0BeLimit 1.3.6.1.4.1.24350.4.4.2.5.1.1 octet string read-write
max bw for BE data coming from wlan0
                                 qosOutWlan0Wlan0BeReserve 1.3.6.1.4.1.24350.4.4.2.5.1.2 octet string read-write
reserved bw for BE data coming from wlan0
                             qosOutWlan0Wlan0Bk 1.3.6.1.4.1.24350.4.4.2.5.2
                                 qosOutWlan0Wlan0BkLimit 1.3.6.1.4.1.24350.4.4.2.5.2.1 octet string read-write
max bw for BK data coming from wlan0
                                 qosOutWlan0Wlan0BkReserve 1.3.6.1.4.1.24350.4.4.2.5.2.2 octet string read-write
reserved bw for BK data coming from wlan0
                             qosOutWlan0Wlan0Limit 1.3.6.1.4.1.24350.4.4.2.5.3 octet string read-write
max bw for all data coming from wlan0
                             qosOutWlan0Wlan0Reserve 1.3.6.1.4.1.24350.4.4.2.5.4 octet string read-write
reserved bw for all data coming from wlan0
                             qosOutWlan0Wlan0Vi 1.3.6.1.4.1.24350.4.4.2.5.5
                                 qosOutWlan0Wlan0ViLimit 1.3.6.1.4.1.24350.4.4.2.5.5.1 octet string read-write
max bw for VI data coming from wlan0
                                 qosOutWlan0Wlan0ViReserve 1.3.6.1.4.1.24350.4.4.2.5.5.2 octet string read-write
reserved bw for VI data coming from wlan0
                             qosOutWlan0Wlan0Vo 1.3.6.1.4.1.24350.4.4.2.5.6
                                 qosOutWlan0Wlan0VoLimit 1.3.6.1.4.1.24350.4.4.2.5.6.1 octet string read-write
max bw for VO data coming from wlan0
                                 qosOutWlan0Wlan0VoReserve 1.3.6.1.4.1.24350.4.4.2.5.6.2 octet string read-write
reserved bw for VO data coming from wlan0
                         qosOutWlan0Wlan1 1.3.6.1.4.1.24350.4.4.2.6
                             qosOutWlan0Wlan1Be 1.3.6.1.4.1.24350.4.4.2.6.1
                                 qosOutWlan0Wlan1BeLimit 1.3.6.1.4.1.24350.4.4.2.6.1.1 octet string read-write
max bw for BE data coming from wlan1
                                 qosOutWlan0Wlan1BeReserve 1.3.6.1.4.1.24350.4.4.2.6.1.2 octet string read-write
reserved bw for BE data coming from wlan1
                             qosOutWlan0Wlan1Bk 1.3.6.1.4.1.24350.4.4.2.6.2
                                 qosOutWlan0Wlan1BkLimit 1.3.6.1.4.1.24350.4.4.2.6.2.1 octet string read-write
max bw for BK data coming from wlan1
                                 qosOutWlan0Wlan1BkReserve 1.3.6.1.4.1.24350.4.4.2.6.2.2 octet string read-write
reserved bw for BK data coming from wlan1
                             qosOutWlan0Wlan1Limit 1.3.6.1.4.1.24350.4.4.2.6.3 octet string read-write
max bw for all data coming from wlan1
                             qosOutWlan0Wlan1Reserve 1.3.6.1.4.1.24350.4.4.2.6.4 octet string read-write
reserved bw for all data coming from wlan1
                             qosOutWlan0Wlan1Vi 1.3.6.1.4.1.24350.4.4.2.6.5
                                 qosOutWlan0Wlan1ViLimit 1.3.6.1.4.1.24350.4.4.2.6.5.1 octet string read-write
max bw for VI data coming from wlan1
                                 qosOutWlan0Wlan1ViReserve 1.3.6.1.4.1.24350.4.4.2.6.5.2 octet string read-write
reserved bw for VI data coming from wlan1
                             qosOutWlan0Wlan1Vo 1.3.6.1.4.1.24350.4.4.2.6.6
                                 qosOutWlan0Wlan1VoLimit 1.3.6.1.4.1.24350.4.4.2.6.6.1 octet string read-write
max bw for VO data coming from wlan1
                                 qosOutWlan0Wlan1VoReserve 1.3.6.1.4.1.24350.4.4.2.6.6.2 octet string read-write
reserved bw for VO data coming from wlan1
                         qosOutWlan0Wlan2 1.3.6.1.4.1.24350.4.4.2.7
                             qosOutWlan0Wlan2Be 1.3.6.1.4.1.24350.4.4.2.7.1
                                 qosOutWlan0Wlan2BeLimit 1.3.6.1.4.1.24350.4.4.2.7.1.1 octet string read-write
max bw for BE data coming from wlan2
                                 qosOutWlan0Wlan2BeReserve 1.3.6.1.4.1.24350.4.4.2.7.1.2 octet string read-write
reserved bw for BE data coming from wlan2
                             qosOutWlan0Wlan2Bk 1.3.6.1.4.1.24350.4.4.2.7.2
                                 qosOutWlan0Wlan2BkLimit 1.3.6.1.4.1.24350.4.4.2.7.2.1 octet string read-write
max bw for BK data coming from wlan2
                                 qosOutWlan0Wlan2BkReserve 1.3.6.1.4.1.24350.4.4.2.7.2.2 octet string read-write
reserved bw for BK data coming from wlan2
                             qosOutWlan0Wlan2Limit 1.3.6.1.4.1.24350.4.4.2.7.3 octet string read-write
max bw for all data coming from wlan2
                             qosOutWlan0Wlan2Reserve 1.3.6.1.4.1.24350.4.4.2.7.4 octet string read-write
reserved bw for all data coming from wlan2
                             qosOutWlan0Wlan2Vi 1.3.6.1.4.1.24350.4.4.2.7.5
                                 qosOutWlan0Wlan2ViLimit 1.3.6.1.4.1.24350.4.4.2.7.5.1 octet string read-write
max bw for VI data coming from wlan2
                                 qosOutWlan0Wlan2ViReserve 1.3.6.1.4.1.24350.4.4.2.7.5.2 octet string read-write
reserved bw for VI data coming from wlan2
                             qosOutWlan0Wlan2Vo 1.3.6.1.4.1.24350.4.4.2.7.6
                                 qosOutWlan0Wlan2VoLimit 1.3.6.1.4.1.24350.4.4.2.7.6.1 octet string read-write
max bw for VO data coming from wlan2
                                 qosOutWlan0Wlan2VoReserve 1.3.6.1.4.1.24350.4.4.2.7.6.2 octet string read-write
reserved bw for VO data coming from wlan2
                         qosOutWlan0Wlan3 1.3.6.1.4.1.24350.4.4.2.8
                             qosOutWlan0Wlan3Be 1.3.6.1.4.1.24350.4.4.2.8.1
                                 qosOutWlan0Wlan3BeLimit 1.3.6.1.4.1.24350.4.4.2.8.1.1 octet string read-write
max bw for BE data coming from wlan3
                                 qosOutWlan0Wlan3BeReserve 1.3.6.1.4.1.24350.4.4.2.8.1.2 octet string read-write
reserved bw for BE data coming from wlan3
                             qosOutWlan0Wlan3Bk 1.3.6.1.4.1.24350.4.4.2.8.2
                                 qosOutWlan0Wlan3BkLimit 1.3.6.1.4.1.24350.4.4.2.8.2.1 octet string read-write
max bw for BK data coming from wlan3
                                 qosOutWlan0Wlan3BkReserve 1.3.6.1.4.1.24350.4.4.2.8.2.2 octet string read-write
reserved bw for BK data coming from wlan3
                             qosOutWlan0Wlan3Limit 1.3.6.1.4.1.24350.4.4.2.8.3 octet string read-write
max bw for all data coming from wlan3
                             qosOutWlan0Wlan3Reserve 1.3.6.1.4.1.24350.4.4.2.8.4 octet string read-write
reserved bw for all data coming from wlan3
                             qosOutWlan0Wlan3Vi 1.3.6.1.4.1.24350.4.4.2.8.5
                                 qosOutWlan0Wlan3ViLimit 1.3.6.1.4.1.24350.4.4.2.8.5.1 octet string read-write
max bw for VI data coming from wlan3
                                 qosOutWlan0Wlan3ViReserve 1.3.6.1.4.1.24350.4.4.2.8.5.2 octet string read-write
reserved bw for VI data coming from wlan3
                             qosOutWlan0Wlan3Vo 1.3.6.1.4.1.24350.4.4.2.8.6
                                 qosOutWlan0Wlan3VoLimit 1.3.6.1.4.1.24350.4.4.2.8.6.1 octet string read-write
max bw for VO data coming from wlan3
                                 qosOutWlan0Wlan3VoReserve 1.3.6.1.4.1.24350.4.4.2.8.6.2 octet string read-write
reserved bw for VO data coming from wlan3
                         qosOutWlan0Wlan4 1.3.6.1.4.1.24350.4.4.2.9
                             qosOutWlan0Wlan4Be 1.3.6.1.4.1.24350.4.4.2.9.1
                                 qosOutWlan0Wlan4BeLimit 1.3.6.1.4.1.24350.4.4.2.9.1.1 octet string read-write
max bw for BE data coming from wlan4
                                 qosOutWlan0Wlan4BeReserve 1.3.6.1.4.1.24350.4.4.2.9.1.2 octet string read-write
reserved bw for BE data coming from wlan4
                             qosOutWlan0Wlan4Bk 1.3.6.1.4.1.24350.4.4.2.9.2
                                 qosOutWlan0Wlan4BkLimit 1.3.6.1.4.1.24350.4.4.2.9.2.1 octet string read-write
max bw for BK data coming from wlan4
                                 qosOutWlan0Wlan4BkReserve 1.3.6.1.4.1.24350.4.4.2.9.2.2 octet string read-write
reserved bw for BK data coming from wlan4
                             qosOutWlan0Wlan4Limit 1.3.6.1.4.1.24350.4.4.2.9.3 octet string read-write
max bw for all data coming from wlan4
                             qosOutWlan0Wlan4Reserve 1.3.6.1.4.1.24350.4.4.2.9.4 octet string read-write
reserved bw for all data coming from wlan4
                             qosOutWlan0Wlan4Vi 1.3.6.1.4.1.24350.4.4.2.9.5
                                 qosOutWlan0Wlan4ViLimit 1.3.6.1.4.1.24350.4.4.2.9.5.1 octet string read-write
max bw for VI data coming from wlan4
                                 qosOutWlan0Wlan4ViReserve 1.3.6.1.4.1.24350.4.4.2.9.5.2 octet string read-write
reserved bw for VI data coming from wlan4
                             qosOutWlan0Wlan4Vo 1.3.6.1.4.1.24350.4.4.2.9.6
                                 qosOutWlan0Wlan4VoLimit 1.3.6.1.4.1.24350.4.4.2.9.6.1 octet string read-write
max bw for VO data coming from wlan4
                                 qosOutWlan0Wlan4VoReserve 1.3.6.1.4.1.24350.4.4.2.9.6.2 octet string read-write
reserved bw for VO data coming from wlan4
             logs 1.3.6.1.4.1.24350.5
                 logsMconfd 1.3.6.1.4.1.24350.5.1
                     logsMconfdFiles 1.3.6.1.4.1.24350.5.1.1 integer read-write
number of old files kept
                     logsMconfdSize 1.3.6.1.4.1.24350.5.1.2 octet string read-write
maximum file size in bytes
                 logsSecure 1.3.6.1.4.1.24350.5.2
                     logsSecureFiles 1.3.6.1.4.1.24350.5.2.1 integer read-write
number of old files kept
                     logsSecureSize 1.3.6.1.4.1.24350.5.2.2 octet string read-write
maximum file size in bytes
                 logsSnmp 1.3.6.1.4.1.24350.5.3
                     logsSnmpFiles 1.3.6.1.4.1.24350.5.3.1 integer read-write
number of old files kept
                     logsSnmpSize 1.3.6.1.4.1.24350.5.3.2 octet string read-write
maximum file size in bytes
                 logsSyslog 1.3.6.1.4.1.24350.5.4
                     logsSyslogFiles 1.3.6.1.4.1.24350.5.4.1 integer read-write
number of old files kept
                     logsSyslogSize 1.3.6.1.4.1.24350.5.4.2 octet string read-write
maximum file size in bytes
             eth0 1.3.6.1.4.1.24350.6
                 eth0Acl 1.3.6.1.4.1.24350.6.1
                     eth0AclMode 1.3.6.1.4.1.24350.6.1.1 octet string read-write
access control list mode ( 'none', 'whitelist', 'blacklist' )
                 eth0Dhcp 1.3.6.1.4.1.24350.6.2
                     eth0DhcpAlwaysbroadcast 1.3.6.1.4.1.24350.6.2.1 octet string read-write
always broadcast dhcp responses
                     eth0DhcpDefaultleasetime 1.3.6.1.4.1.24350.6.2.2 integer read-write
default dhcp lease expiration in seconds
                     eth0DhcpMaxleasetime 1.3.6.1.4.1.24350.6.2.3 integer read-write
maximum requestable dhcp lease expiration in seconds
                     eth0DhcpRelay 1.3.6.1.4.1.24350.6.2.4
                         eth0DhcpRelayEnable 1.3.6.1.4.1.24350.6.2.4.1 octet string read-write
use dhcp relay (if sys.dhcp.relay.enable=yes)
                     eth0DhcpReserve 1.3.6.1.4.1.24350.6.2.5 integer read-write
ip addresses to reserve at bottom of range for static assignments
                     eth0DhcpRole 1.3.6.1.4.1.24350.6.2.6 octet string read-write
interface dhcp role (none, client, server)
                 eth0Enable 1.3.6.1.4.1.24350.6.3 octet string read-write
interface is enabled
                 eth0If 1.3.6.1.4.1.24350.6.4 octet string read-only
interface associated with this module
                 eth0Ip 1.3.6.1.4.1.24350.6.5
                     eth0IpAddress 1.3.6.1.4.1.24350.6.5.1 octet string read-only
ip address
                     eth0IpAddressforce 1.3.6.1.4.1.24350.6.5.2 octet string read-write
override .ip.address (or blank)
                     eth0IpBroadcast 1.3.6.1.4.1.24350.6.5.3 octet string read-only
broadcast address
                     eth0IpBroadcastforce 1.3.6.1.4.1.24350.6.5.4 octet string read-write
override .ip.broadcast (or blank)
                     eth0IpGateway 1.3.6.1.4.1.24350.6.5.5 octet string read-only
gateway address
                     eth0IpGatewayforce 1.3.6.1.4.1.24350.6.5.6 octet string read-write
override .ip.gateway (or blank)
                     eth0IpImplicit 1.3.6.1.4.1.24350.6.5.7
                         eth0IpImplicitSize 1.3.6.1.4.1.24350.6.5.7.1
                             eth0IpImplicitSizeActual 1.3.6.1.4.1.24350.6.5.7.1.1 integer read-only
actual size of assigned address range
                             eth0IpImplicitSizeRequested 1.3.6.1.4.1.24350.6.5.7.1.2 octet string read-write
requested size of address range (multiple of 32 minus 1)
                         eth0IpImplicitStart 1.3.6.1.4.1.24350.6.5.7.2
                             eth0IpImplicitStartActual 1.3.6.1.4.1.24350.6.5.7.2.1 integer read-only
actual assigned fourth octet
                             eth0IpImplicitStartRequested 1.3.6.1.4.1.24350.6.5.7.2.2 octet string read-write
requested interface fourth octet (multiple of 32 plus 1)
                     eth0IpNetmask 1.3.6.1.4.1.24350.6.5.8 octet string read-only
network mask
                     eth0IpNetmaskforce 1.3.6.1.4.1.24350.6.5.9 octet string read-write
override .ip.netmask (or blank)
                 eth0Role 1.3.6.1.4.1.24350.6.6 octet string read-write
intended interface role (gateway, access, bridge)
                 eth0Routes 1.3.6.1.4.1.24350.6.7
                     eth0RoutesStatic 1.3.6.1.4.1.24350.6.7.1 octet string read-write
static routes for this interface
                 eth0Vlan 1.3.6.1.4.1.24350.6.8
                     eth0VlanEnable 1.3.6.1.4.1.24350.6.8.1 octet string read-write
use a vlan for this interface
                     eth0VlanId 1.3.6.1.4.1.24350.6.8.2 integer read-write
vlan id (0 and 1 are usually reserved)
                 eth0Vpn 1.3.6.1.4.1.24350.6.9
                     eth0VpnDevice 1.3.6.1.4.1.24350.6.9.1 octet string read-write
device type (tap or tun)
                     eth0VpnEnable 1.3.6.1.4.1.24350.6.9.2 octet string read-write
enable vpn on gateway node
                     eth0VpnKeyfile 1.3.6.1.4.1.24350.6.9.3 octet string read-write
base name of crt/key files
                     eth0VpnPort 1.3.6.1.4.1.24350.6.9.4 integer read-write
port number at vpn server
                     eth0VpnProtocol 1.3.6.1.4.1.24350.6.9.5 octet string read-write
protocol used for vpn
                     eth0VpnServer 1.3.6.1.4.1.24350.6.9.6 octet string read-write
hostname or ip address of the vpn server
             br0 1.3.6.1.4.1.24350.7
                 br0Acl 1.3.6.1.4.1.24350.7.1
                     br0AclMode 1.3.6.1.4.1.24350.7.1.1 octet string read-write
access control list mode ( 'none', 'whitelist', 'blacklist' )
                 br0Dhcp 1.3.6.1.4.1.24350.7.2
                     br0DhcpAlwaysbroadcast 1.3.6.1.4.1.24350.7.2.1 octet string read-write
always broadcast dhcp responses
                     br0DhcpDefaultleasetime 1.3.6.1.4.1.24350.7.2.2 integer read-write
default dhcp lease expiration in seconds
                     br0DhcpMaxleasetime 1.3.6.1.4.1.24350.7.2.3 integer read-write
maximum requestable dhcp lease expiration in seconds
                     br0DhcpRelay 1.3.6.1.4.1.24350.7.2.4
                         br0DhcpRelayEnable 1.3.6.1.4.1.24350.7.2.4.1 octet string read-write
use dhcp relay (if sys.dhcp.relay.enable=yes)
                     br0DhcpReserve 1.3.6.1.4.1.24350.7.2.5 integer read-write
ip addresses to reserve at bottom of range for static assignments
                     br0DhcpRole 1.3.6.1.4.1.24350.7.2.6 octet string read-write
interface dhcp role (none, client, server)
                 br0Enable 1.3.6.1.4.1.24350.7.3 octet string read-write
interface is enabled
                 br0Forwardingdelay 1.3.6.1.4.1.24350.7.4 integer read-write
how long bridge watches traffic before participating
                 br0If 1.3.6.1.4.1.24350.7.5 octet string read-only
interface associated with this module
                 br0Ip 1.3.6.1.4.1.24350.7.6
                     br0IpAddress 1.3.6.1.4.1.24350.7.6.1 octet string read-only
ip address
                     br0IpAddressforce 1.3.6.1.4.1.24350.7.6.2 octet string read-write
override .ip.address (or blank)
                     br0IpBroadcast 1.3.6.1.4.1.24350.7.6.3 octet string read-only
broadcast address
                     br0IpBroadcastforce 1.3.6.1.4.1.24350.7.6.4 octet string read-write
override .ip.broadcast (or blank)
                     br0IpGateway 1.3.6.1.4.1.24350.7.6.5 octet string read-only
gateway address
                     br0IpGatewayforce 1.3.6.1.4.1.24350.7.6.6 octet string read-write
override .ip.gateway (or blank)
                     br0IpNetmask 1.3.6.1.4.1.24350.7.6.7 octet string read-only
network mask
                     br0IpNetmaskforce 1.3.6.1.4.1.24350.7.6.8 octet string read-write
override .ip.netmask (or blank)
                 br0Role 1.3.6.1.4.1.24350.7.7 octet string read-only
intended interface role (bridge)
                 br0Routes 1.3.6.1.4.1.24350.7.8
                     br0RoutesStatic 1.3.6.1.4.1.24350.7.8.1 octet string read-write
static routes for this interface
                 br0Stp 1.3.6.1.4.1.24350.7.9
                     br0StpEnable 1.3.6.1.4.1.24350.7.9.1 octet string read-write
enable spanning tree protocol
             alias99 1.3.6.1.4.1.24350.8
                 alias99If 1.3.6.1.4.1.24350.8.1 octet string read-only
interface associated with this module
                 alias99Ip 1.3.6.1.4.1.24350.8.2
                     alias99IpAddress 1.3.6.1.4.1.24350.8.2.1 octet string read-write
ip address
                     alias99IpBroadcast 1.3.6.1.4.1.24350.8.2.2 octet string read-write
broadcast address
                     alias99IpGateway 1.3.6.1.4.1.24350.8.2.3 octet string read-write
gateway address
                     alias99IpNetmask 1.3.6.1.4.1.24350.8.2.4 octet string read-write
network mask
             radio0 1.3.6.1.4.1.24350.9
                 radio0Channel 1.3.6.1.4.1.24350.9.1 integer read-write
wireless channel
                 radio0Chansize 1.3.6.1.4.1.24350.9.2 octet string read-write
wireless channel size - 1=full, 2=half, 4=quarter
                 radio0Distance 1.3.6.1.4.1.24350.9.3 octet string read-write
distance (in miles or km, see sys.units) of maximum link distance, or blank
                 radio0Distancemeters 1.3.6.1.4.1.24350.9.4 octet string read-write
distance in meters
                 radio0Frequency 1.3.6.1.4.1.24350.9.5 octet string read-write
wireless frequency (overrides radio0.channel)
                 radio0Mode 1.3.6.1.4.1.24350.9.6 integer read-write
802.11 mode (0=auto, 1=802.11a, 2=802.11b, 3=802.11g)
                 radio0Modes 1.3.6.1.4.1.24350.9.7 octet string read-only
802.11 modes supported by this card
                 radio0Pureg 1.3.6.1.4.1.24350.9.8 octet string read-write
802.11g only mode (no 802.11b)
                 radio0Ratectl 1.3.6.1.4.1.24350.9.9 octet string read-write
rate control algorithm (sample, minstrel)
                 radio0Rts 1.3.6.1.4.1.24350.9.10 octet string read-write
rts threshold
                 radio0Shortpreamble 1.3.6.1.4.1.24350.9.11 octet string read-write
allow short preamble - buggy old clients may need this off
                 radio0Turbo 1.3.6.1.4.1.24350.9.12 octet string read-write
802.11g turbo mode
                 radio0Txpower 1.3.6.1.4.1.24350.9.13 octet string read-write
max transmit power in dBm (0-30)
                 radio0Wlans 1.3.6.1.4.1.24350.9.14 octet string read-only
wlans mapped to this radio
                 radio0Wlansextra 1.3.6.1.4.1.24350.9.15 octet string read-only
             radio1 1.3.6.1.4.1.24350.10
                   radio1Channel 1.3.6.1.4.1.24350.10.1 integer read-write
wireless channel
                   radio1Chansize 1.3.6.1.4.1.24350.10.2 octet string read-write
wireless channel size - 1=full, 2=half, 4=quarter
                   radio1Distance 1.3.6.1.4.1.24350.10.3 octet string read-write
distance (in miles or km, see sys.units) of maximum link distance, or blank
                   radio1Distancemeters 1.3.6.1.4.1.24350.10.4 octet string read-write
distance in meters
                   radio1Frequency 1.3.6.1.4.1.24350.10.5 octet string read-write
wireless frequency (overrides radio1.channel)
                   radio1Mode 1.3.6.1.4.1.24350.10.6 integer read-write
802.11 mode (0=auto, 1=802.11a, 2=802.11b, 3=802.11g)
                   radio1Modes 1.3.6.1.4.1.24350.10.7 octet string read-only
802.11 modes supported by this card
                   radio1Pureg 1.3.6.1.4.1.24350.10.8 octet string read-write
802.11g only mode (no 802.11b)
                   radio1Ratectl 1.3.6.1.4.1.24350.10.9 octet string read-write
rate control algorithm (sample, minstrel)
                   radio1Rts 1.3.6.1.4.1.24350.10.10 octet string read-write
rts threshold
                   radio1Shortpreamble 1.3.6.1.4.1.24350.10.11 octet string read-write
allow short preamble - buggy old clients may need this off
                   radio1Turbo 1.3.6.1.4.1.24350.10.12 octet string read-write
802.11g turbo mode
                   radio1Txpower 1.3.6.1.4.1.24350.10.13 octet string read-write
max transmit power in dBm (0-30)
                   radio1Wlans 1.3.6.1.4.1.24350.10.14 octet string read-only
wlans mapped to this radio
                   radio1Wlansextra 1.3.6.1.4.1.24350.10.15 octet string read-only
             wlan0 1.3.6.1.4.1.24350.11
                   wlan0Acl 1.3.6.1.4.1.24350.11.1
                       wlan0AclMode 1.3.6.1.4.1.24350.11.1.1 octet string read-write
access control list mode ( 'none', 'whitelist', 'blacklist' )
                   wlan0Beaconinterval 1.3.6.1.4.1.24350.11.2 integer read-write
beacon interval in milliseconds
                   wlan0Cellid 1.3.6.1.4.1.24350.11.3 octet string read-only
adhoc cell id
                   wlan0Dhcp 1.3.6.1.4.1.24350.11.4
                       wlan0DhcpAlwaysbroadcast 1.3.6.1.4.1.24350.11.4.1 octet string read-write
always broadcast dhcp responses
                       wlan0DhcpDefaultleasetime 1.3.6.1.4.1.24350.11.4.2 integer read-write
default dhcp lease expiration in seconds
                       wlan0DhcpMaxleasetime 1.3.6.1.4.1.24350.11.4.3 integer read-write
maximum requestable dhcp lease expiration in seconds
                       wlan0DhcpRelay 1.3.6.1.4.1.24350.11.4.4
                           wlan0DhcpRelayEnable 1.3.6.1.4.1.24350.11.4.4.1 octet string read-write
use dhcp relay (if sys.dhcp.relay.enable=yes)
                       wlan0DhcpReserve 1.3.6.1.4.1.24350.11.4.5 integer read-write
ip addresses to reserve at bottom of range for static assignments
                       wlan0DhcpRole 1.3.6.1.4.1.24350.11.4.6 octet string read-write
interface dhcp role (none, client, server)
                   wlan0Enable 1.3.6.1.4.1.24350.11.5 octet string read-write
interface is enabled
                   wlan0Enhsec 1.3.6.1.4.1.24350.11.6 octet string read-write
ignore clients that specify 'ANY' ssid
                   wlan0Essid 1.3.6.1.4.1.24350.11.7 octet string read-write
essid for this ap
                   wlan0Fabric 1.3.6.1.4.1.24350.11.8
                       wlan0FabricArgs 1.3.6.1.4.1.24350.11.8.1 octet string read-write
mesh fabric arguments - touch at your peril!
                       wlan0FabricBridge 1.3.6.1.4.1.24350.11.8.2 octet string read-write
bridge argument
                       wlan0FabricCmd1 1.3.6.1.4.1.24350.11.8.3 octet string read-write
command to activate mesh fabric part 1
                       wlan0FabricCmd2 1.3.6.1.4.1.24350.11.8.4 octet string read-write
command to activate mesh part 2
                       wlan0FabricEnable 1.3.6.1.4.1.24350.11.8.5 octet string read-write
run mesh fabric?
                       wlan0FabricGateway 1.3.6.1.4.1.24350.11.8.6
                           wlan0FabricGatewayEnable 1.3.6.1.4.1.24350.11.8.6.1 octet string read-only
is this node a gateway
                           wlan0FabricGatewayIf 1.3.6.1.4.1.24350.11.8.6.2 octet string read-only
interface acting as mesh gateway, if any
                       wlan0FabricMargin 1.3.6.1.4.1.24350.11.8.7 integer read-write
if rssi drops this far below .join, drop the neighbor
                       wlan0FabricRouteadvert 1.3.6.1.4.1.24350.11.8.8 octet string read-write
route advertisement arguments
                       wlan0FabricRssi 1.3.6.1.4.1.24350.11.8.9
                           wlan0FabricRssiJoin 1.3.6.1.4.1.24350.11.8.9.1 integer read-write
rssi level to join neighbor
                           wlan0FabricRssiMargin 1.3.6.1.4.1.24350.11.8.9.2 integer read-write
if rssi drops this far below .join, drop neighbor
                   wlan0Frag 1.3.6.1.4.1.24350.11.9 octet string read-write
fragmentation threshold
                   wlan0Hideessid 1.3.6.1.4.1.24350.11.10 octet string read-write
don't broadcast the essid
                   wlan0If 1.3.6.1.4.1.24350.11.11 octet string read-only
interface associated with this module
                   wlan0Ip 1.3.6.1.4.1.24350.11.12
                         wlan0IpAddress 1.3.6.1.4.1.24350.11.12.1 octet string read-only
ip address
                         wlan0IpAddressforce 1.3.6.1.4.1.24350.11.12.2 octet string read-only
override .ip.address (or blank)
                         wlan0IpBroadcast 1.3.6.1.4.1.24350.11.12.3 octet string read-only
broadcast address
                         wlan0IpBroadcastforce 1.3.6.1.4.1.24350.11.12.4 octet string read-only
override .ip.broadcast (or blank)
                         wlan0IpGateway 1.3.6.1.4.1.24350.11.12.5 octet string read-only
gateway address
                         wlan0IpGatewayforce 1.3.6.1.4.1.24350.11.12.6 octet string read-only
override .ip.gateway (or blank)
                         wlan0IpNetmask 1.3.6.1.4.1.24350.11.12.7 octet string read-write
network mask
                         wlan0IpNetmaskforce 1.3.6.1.4.1.24350.11.12.8 octet string read-only
override .ip.netmask (or blank)
                   wlan0Iwconfig 1.3.6.1.4.1.24350.11.13
                         wlan0IwconfigCmd 1.3.6.1.4.1.24350.11.13.1 octet string read-write
parameters to pass to iwconfig after all other settings
                   wlan0Iwpriv 1.3.6.1.4.1.24350.11.14
                         wlan0IwprivCmd 1.3.6.1.4.1.24350.11.14.1 octet string read-write
parameters to pass to iwpriv after all other settings
                   wlan0Key 1.3.6.1.4.1.24350.11.15 octet string read-write
wep key - if present, overrides .keys
                   wlan0Keys 1.3.6.1.4.1.24350.11.16
                         wlan0Keys1 1.3.6.1.4.1.24350.11.16.1 octet string read-write
one of four keys selected with .keys.default
                         wlan0Keys2 1.3.6.1.4.1.24350.11.16.2 octet string read-write
one of four keys selected with .keys.default
                         wlan0Keys3 1.3.6.1.4.1.24350.11.16.3 octet string read-write
one of four keys selected with .keys.default
                         wlan0Keys4 1.3.6.1.4.1.24350.11.16.4 octet string read-write
one of four keys selected with .keys.default
                         wlan0KeysDefault 1.3.6.1.4.1.24350.11.16.5 octet string read-write
1 to 4 to choose which of wlan0.keys.1-4 to use
                   wlan0Mconfd 1.3.6.1.4.1.24350.11.17
                         wlan0MconfdEnable 1.3.6.1.4.1.24350.11.17.1 octet string read-write
run mconfd daemon? distributed mesh configuration
                         wlan0MconfdExternalhosts 1.3.6.1.4.1.24350.11.17.2 octet string read-only
list of external hosts we try to make external
                   wlan0Mode 1.3.6.1.4.1.24350.11.18 octet string read-write
operating mode ( ap/master, adhoc, adhoc-demo, sta/client )
                   wlan0Mroute 1.3.6.1.4.1.24350.11.19
                         wlan0MrouteArgs 1.3.6.1.4.1.24350.11.19.1 octet string read-write
mroute arguments
                         wlan0MrouteCmd 1.3.6.1.4.1.24350.11.19.2 octet string read-write
mroute command
                         wlan0MrouteEnable 1.3.6.1.4.1.24350.11.19.3 octet string read-write
run mroute daemon - IGMP query utility
                   wlan0Mtu 1.3.6.1.4.1.24350.11.20 integer read-write
maximum transmission unit - may cause serious problems if set too low
                   wlan0Radio 1.3.6.1.4.1.24350.11.21 octet string read-write
which physical radio this vap is on (0 or 1)
                   wlan0Rate 1.3.6.1.4.1.24350.11.22 octet string read-write
communications rate
                   wlan0Role 1.3.6.1.4.1.24350.11.23 octet string read-write
intended interface role (mesh, pxp (point to point), bridge)
                   wlan0Routes 1.3.6.1.4.1.24350.11.24
                         wlan0RoutesAddprivnets 1.3.6.1.4.1.24350.11.24.1 octet string read-write
add sys.nets.internal.combined to mesh static routes?
                         wlan0RoutesStatic 1.3.6.1.4.1.24350.11.24.2 octet string read-write
static routes for this interface
                   wlan0Topomc 1.3.6.1.4.1.24350.11.25
                         wlan0TopomcArgs 1.3.6.1.4.1.24350.11.25.1 octet string read-write
topomc arguments
                         wlan0TopomcCmd 1.3.6.1.4.1.24350.11.25.2 octet string read-write
topomc command
                         wlan0TopomcEnable 1.3.6.1.4.1.24350.11.25.3 octet string read-write
run topomc daemon? - network topology reporting
             wlan1 1.3.6.1.4.1.24350.12
                   wlan1Acl 1.3.6.1.4.1.24350.12.1
                       wlan1AclMode 1.3.6.1.4.1.24350.12.1.1 octet string read-write
access control list mode ( 'none', 'whitelist', 'blacklist' )
                   wlan1Beaconinterval 1.3.6.1.4.1.24350.12.2 integer read-write
beacon interval in milliseconds
                   wlan1Cellid 1.3.6.1.4.1.24350.12.3 octet string read-write
cell id for adhoc mode
                   wlan1Dhcp 1.3.6.1.4.1.24350.12.4
                       wlan1DhcpAlwaysbroadcast 1.3.6.1.4.1.24350.12.4.1 octet string read-write
always broadcast dhcp responses
                       wlan1DhcpDefaultleasetime 1.3.6.1.4.1.24350.12.4.2 integer read-write
default dhcp lease expiration in seconds
                       wlan1DhcpMaxleasetime 1.3.6.1.4.1.24350.12.4.3 integer read-write
maximum requestable dhcp lease expiration in seconds
                       wlan1DhcpRelay 1.3.6.1.4.1.24350.12.4.4
                           wlan1DhcpRelayEnable 1.3.6.1.4.1.24350.12.4.4.1 octet string read-write
use dhcp relay (if sys.dhcp.relay.enable=yes)
                       wlan1DhcpReserve 1.3.6.1.4.1.24350.12.4.5 integer read-write
ip addresses to reserve at bottom of range for static assignments
                       wlan1DhcpRole 1.3.6.1.4.1.24350.12.4.6 octet string read-write
interface dhcp role (none, client, server)
                   wlan1Enable 1.3.6.1.4.1.24350.12.5 octet string read-write
interface is enabled
                   wlan1Enhsec 1.3.6.1.4.1.24350.12.6 octet string read-write
ignore clients that specify 'ANY' ssid
                   wlan1Essid 1.3.6.1.4.1.24350.12.7 octet string read-write
essid for this ap
                   wlan1Frag 1.3.6.1.4.1.24350.12.8 octet string read-write
fragmentation threshold
                   wlan1Hideessid 1.3.6.1.4.1.24350.12.9 octet string read-write
don't broadcast the essid
                   wlan1If 1.3.6.1.4.1.24350.12.10 octet string read-only
interface associated with this module
                   wlan1Ip 1.3.6.1.4.1.24350.12.11
                         wlan1IpAddress 1.3.6.1.4.1.24350.12.11.1 octet string read-only
ip address
                         wlan1IpAddressforce 1.3.6.1.4.1.24350.12.11.2 octet string read-write
override .ip.address (or blank)
                         wlan1IpBroadcast 1.3.6.1.4.1.24350.12.11.3 octet string read-only
broadcast address
                         wlan1IpBroadcastforce 1.3.6.1.4.1.24350.12.11.4 octet string read-write
override .ip.broadcast (or blank)
                         wlan1IpGateway 1.3.6.1.4.1.24350.12.11.5 octet string read-only
gateway address
                         wlan1IpGatewayforce 1.3.6.1.4.1.24350.12.11.6 octet string read-write
override .ip.gateway (or blank)
                         wlan1IpImplicit 1.3.6.1.4.1.24350.12.11.7
                             wlan1IpImplicitSize 1.3.6.1.4.1.24350.12.11.7.1
                                 wlan1IpImplicitSizeActual 1.3.6.1.4.1.24350.12.11.7.1.1 integer read-only
actual size of assigned address range
                                 wlan1IpImplicitSizeRequested 1.3.6.1.4.1.24350.12.11.7.1.2 octet string read-write
requested size of address range (multiple of 32 minus 1)
                             wlan1IpImplicitStart 1.3.6.1.4.1.24350.12.11.7.2
                                 wlan1IpImplicitStartActual 1.3.6.1.4.1.24350.12.11.7.2.1 integer read-only
actual assigned fourth octet
                                 wlan1IpImplicitStartRequested 1.3.6.1.4.1.24350.12.11.7.2.2 octet string read-write
requested interface fourth octet (multiple of 32 plus 1)
                         wlan1IpNetmask 1.3.6.1.4.1.24350.12.11.8 octet string read-only
network mask
                         wlan1IpNetmaskforce 1.3.6.1.4.1.24350.12.11.9 octet string read-write
override .ip.netmask (or blank)
                   wlan1Iwconfig 1.3.6.1.4.1.24350.12.12
                         wlan1IwconfigCmd 1.3.6.1.4.1.24350.12.12.1 octet string read-write
parameters to pass to iwconfig after all other settings
                   wlan1Iwpriv 1.3.6.1.4.1.24350.12.13
                         wlan1IwprivCmd 1.3.6.1.4.1.24350.12.13.1 octet string read-write
parameters to pass to iwpriv after all other settings
                   wlan1Key 1.3.6.1.4.1.24350.12.14 octet string read-write
wep key - if present, overrides .keys
                   wlan1Keys 1.3.6.1.4.1.24350.12.15
                         wlan1Keys1 1.3.6.1.4.1.24350.12.15.1 octet string read-write
one of four keys selected with .keys.default
                         wlan1Keys2 1.3.6.1.4.1.24350.12.15.2 octet string read-write
one of four keys selected with .keys.default
                         wlan1Keys3 1.3.6.1.4.1.24350.12.15.3 octet string read-write
one of four keys selected with .keys.default
                         wlan1Keys4 1.3.6.1.4.1.24350.12.15.4 octet string read-write
one of four keys selected with .keys.default
                         wlan1KeysDefault 1.3.6.1.4.1.24350.12.15.5 octet string read-write
1 to 4 to choose which of wlan1.keys.1-4 to use
                   wlan1Mode 1.3.6.1.4.1.24350.12.16 octet string read-write
operating mode ( ap/master, adhoc, adhoc-demo, sta/client )
                   wlan1Mtu 1.3.6.1.4.1.24350.12.17 integer read-write
maximum transmission unit - may cause serious problems if set too low
                   wlan1Radio 1.3.6.1.4.1.24350.12.18 octet string read-write
which physical radio this vap is on (0 or 1)
                   wlan1Rate 1.3.6.1.4.1.24350.12.19 octet string read-write
communications rate
                   wlan1Role 1.3.6.1.4.1.24350.12.20 octet string read-write
intended interface role (access, bridge)
                   wlan1Routes 1.3.6.1.4.1.24350.12.21
                         wlan1RoutesStatic 1.3.6.1.4.1.24350.12.21.1 octet string read-write
static routes for this interface
                   wlan1Vlan 1.3.6.1.4.1.24350.12.22
                         wlan1VlanEnable 1.3.6.1.4.1.24350.12.22.1 octet string read-write
use a vlan for this interface
                         wlan1VlanId 1.3.6.1.4.1.24350.12.22.2 integer read-write
vlan id (0 and 1 are usually reserved)
                   wlan1Wpa 1.3.6.1.4.1.24350.12.23
                         wlan1WpaAuth 1.3.6.1.4.1.24350.12.23.1
                             wlan1WpaAuthArgs 1.3.6.1.4.1.24350.12.23.1.1 octet string read-write
arguments passed to authenticator
                             wlan1WpaAuthCustom 1.3.6.1.4.1.24350.12.23.1.2 octet string read-write
command used to start authenticator if .wpa.auth.type is 'custom'
                             wlan1WpaAuthInternal 1.3.6.1.4.1.24350.12.23.1.3 octet string read-write
0 for external, 1 for internal
                             wlan1WpaAuthServer 1.3.6.1.4.1.24350.12.23.1.4
                                 wlan1WpaAuthServerAddr 1.3.6.1.4.1.24350.12.23.1.4.1 octet string read-write
authentication server address
                                 wlan1WpaAuthServerPort 1.3.6.1.4.1.24350.12.23.1.4.2 integer read-write
authentication server port
                                 wlan1WpaAuthServerSharedsecret 1.3.6.1.4.1.24350.12.23.1.4.3 octet string read-write
shared secret
                             wlan1WpaAuthType 1.3.6.1.4.1.24350.12.23.1.5 octet string read-write
'hostapd' or 'custom'
                         wlan1WpaBridge 1.3.6.1.4.1.24350.12.23.2 octet string read-only
bridge if any, set by sys.l2.bridge.enable
                         wlan1WpaCa 1.3.6.1.4.1.24350.12.23.3
                             wlan1WpaCaCert 1.3.6.1.4.1.24350.12.23.3.1
                                 wlan1WpaCaCertFile 1.3.6.1.4.1.24350.12.23.3.1.1 octet string read-write
ca_cert file
                         wlan1WpaEapol 1.3.6.1.4.1.24350.12.23.4
                             wlan1WpaEapolVersion 1.3.6.1.4.1.24350.12.23.4.1 octet string read-write
2 is default, but some older clients need 1
                         wlan1WpaEnable 1.3.6.1.4.1.24350.12.23.5 octet string read-write
wpa support enabled?
                         wlan1WpaEssid 1.3.6.1.4.1.24350.12.23.6 octet string read-write
essid for wpa authentication
                         wlan1WpaIf 1.3.6.1.4.1.24350.12.23.7 octet string read-only
management frame interface, same as wlan1.if
                         wlan1WpaKeymgmt 1.3.6.1.4.1.24350.12.23.8 octet string read-write
WPA-PSK and/or WPA-EAP
                         wlan1WpaMode 1.3.6.1.4.1.24350.12.23.9 integer read-write
wpa modes: 1=wpa1, 2=wpa2, 3=both
                         wlan1WpaNode 1.3.6.1.4.1.24350.12.23.10
                               wlan1WpaNodeCert 1.3.6.1.4.1.24350.12.23.10.1
                                   wlan1WpaNodeCertFile 1.3.6.1.4.1.24350.12.23.10.1.1 octet string read-write
server_cert file
                               wlan1WpaNodeKey 1.3.6.1.4.1.24350.12.23.10.2
                                   wlan1WpaNodeKeyFile 1.3.6.1.4.1.24350.12.23.10.2.1 octet string read-write
private_key file
                                   wlan1WpaNodeKeyPassphrase 1.3.6.1.4.1.24350.12.23.10.2.2 octet string read-write
passphrase for the node's private key
                         wlan1WpaPairwise 1.3.6.1.4.1.24350.12.23.11 octet string read-write
accepted cipher suites - CCMP and/or TKIP
                         wlan1WpaPassphrase 1.3.6.1.4.1.24350.12.23.12 octet string read-write
wpa passphrase
             wlan2 1.3.6.1.4.1.24350.13
                   wlan2Acl 1.3.6.1.4.1.24350.13.1
                       wlan2AclMode 1.3.6.1.4.1.24350.13.1.1 octet string read-write
access control list mode ( 'none', 'whitelist', 'blacklist' )
                   wlan2Beaconinterval 1.3.6.1.4.1.24350.13.2 integer read-write
beacon interval in milliseconds
                   wlan2Cellid 1.3.6.1.4.1.24350.13.3 octet string read-write
cell id for adhoc mode
                   wlan2Dhcp 1.3.6.1.4.1.24350.13.4
                       wlan2DhcpAlwaysbroadcast 1.3.6.1.4.1.24350.13.4.1 octet string read-write
always broadcast dhcp responses
                       wlan2DhcpDefaultleasetime 1.3.6.1.4.1.24350.13.4.2 integer read-write
default dhcp lease expiration in seconds
                       wlan2DhcpMaxleasetime 1.3.6.1.4.1.24350.13.4.3 integer read-write
maximum requestable dhcp lease expiration in seconds
                       wlan2DhcpRelay 1.3.6.1.4.1.24350.13.4.4
                           wlan2DhcpRelayEnable 1.3.6.1.4.1.24350.13.4.4.1 octet string read-write
use dhcp relay (if sys.dhcp.relay.enable=yes)
                       wlan2DhcpReserve 1.3.6.1.4.1.24350.13.4.5 integer read-write
ip addresses to reserve at bottom of range for static assignments
                       wlan2DhcpRole 1.3.6.1.4.1.24350.13.4.6 octet string read-write
interface dhcp role (none, client, server)
                   wlan2Enable 1.3.6.1.4.1.24350.13.5 octet string read-write
interface is enabled
                   wlan2Enhsec 1.3.6.1.4.1.24350.13.6 octet string read-write
ignore clients that specify 'ANY' ssid
                   wlan2Essid 1.3.6.1.4.1.24350.13.7 octet string read-write
essid for this ap
                   wlan2Frag 1.3.6.1.4.1.24350.13.8 octet string read-write
fragmentation threshold
                   wlan2Hideessid 1.3.6.1.4.1.24350.13.9 octet string read-write
don't broadcast the essid
                   wlan2If 1.3.6.1.4.1.24350.13.10 octet string read-only
interface associated with this module
                   wlan2Ip 1.3.6.1.4.1.24350.13.11
                         wlan2IpAddress 1.3.6.1.4.1.24350.13.11.1 octet string read-only
ip address
                         wlan2IpAddressforce 1.3.6.1.4.1.24350.13.11.2 octet string read-write
override .ip.address (or blank)
                         wlan2IpBroadcast 1.3.6.1.4.1.24350.13.11.3 octet string read-only
broadcast address
                         wlan2IpBroadcastforce 1.3.6.1.4.1.24350.13.11.4 octet string read-write
override .ip.broadcast (or blank)
                         wlan2IpGateway 1.3.6.1.4.1.24350.13.11.5 octet string read-only
gateway address
                         wlan2IpGatewayforce 1.3.6.1.4.1.24350.13.11.6 octet string read-write
override .ip.gateway (or blank)
                         wlan2IpImplicit 1.3.6.1.4.1.24350.13.11.7
                             wlan2IpImplicitSize 1.3.6.1.4.1.24350.13.11.7.1
                                 wlan2IpImplicitSizeActual 1.3.6.1.4.1.24350.13.11.7.1.1 integer read-only
actual size of assigned address range
                                 wlan2IpImplicitSizeRequested 1.3.6.1.4.1.24350.13.11.7.1.2 octet string read-write
requested size of address range (multiple of 32 minus 1)
                             wlan2IpImplicitStart 1.3.6.1.4.1.24350.13.11.7.2
                                 wlan2IpImplicitStartActual 1.3.6.1.4.1.24350.13.11.7.2.1 integer read-only
actual assigned fourth octet
                                 wlan2IpImplicitStartRequested 1.3.6.1.4.1.24350.13.11.7.2.2 octet string read-write
requested interface fourth octet (multiple of 32 plus 1)
                         wlan2IpNetmask 1.3.6.1.4.1.24350.13.11.8 octet string read-only
network mask
                         wlan2IpNetmaskforce 1.3.6.1.4.1.24350.13.11.9 octet string read-write
override .ip.netmask (or blank)
                   wlan2Iwconfig 1.3.6.1.4.1.24350.13.12
                         wlan2IwconfigCmd 1.3.6.1.4.1.24350.13.12.1 octet string read-write
parameters to pass to iwconfig after all other settings
                   wlan2Iwpriv 1.3.6.1.4.1.24350.13.13
                         wlan2IwprivCmd 1.3.6.1.4.1.24350.13.13.1 octet string read-write
parameters to pass to iwpriv after all other settings
                   wlan2Key 1.3.6.1.4.1.24350.13.14 octet string read-write
wep key - if present, overrides .keys
                   wlan2Keys 1.3.6.1.4.1.24350.13.15
                         wlan2Keys1 1.3.6.1.4.1.24350.13.15.1 octet string read-write
one of four keys selected with .keys.default
                         wlan2Keys2 1.3.6.1.4.1.24350.13.15.2 octet string read-write
one of four keys selected with .keys.default
                         wlan2Keys3 1.3.6.1.4.1.24350.13.15.3 octet string read-write
one of four keys selected with .keys.default
                         wlan2Keys4 1.3.6.1.4.1.24350.13.15.4 octet string read-write
one of four keys selected with .keys.default
                         wlan2KeysDefault 1.3.6.1.4.1.24350.13.15.5 octet string read-write
1 to 4 to choose which of wlan2.keys.1-4 to use
                   wlan2Mode 1.3.6.1.4.1.24350.13.16 octet string read-write
operating mode ( ap/master, adhoc, adhoc-demo, sta/client )
                   wlan2Mtu 1.3.6.1.4.1.24350.13.17 integer read-write
maximum transmission unit - may cause serious problems if set too low
                   wlan2Radio 1.3.6.1.4.1.24350.13.18 octet string read-write
which physical radio this vap is on (0 or 1)
                   wlan2Rate 1.3.6.1.4.1.24350.13.19 octet string read-write
communications rate
                   wlan2Role 1.3.6.1.4.1.24350.13.20 octet string read-write
intended interface role (access, bridge)
                   wlan2Routes 1.3.6.1.4.1.24350.13.21
                         wlan2RoutesStatic 1.3.6.1.4.1.24350.13.21.1 octet string read-write
static routes for this interface
                   wlan2Vlan 1.3.6.1.4.1.24350.13.22
                         wlan2VlanEnable 1.3.6.1.4.1.24350.13.22.1 octet string read-write
use a vlan for this interface
                         wlan2VlanId 1.3.6.1.4.1.24350.13.22.2 integer read-write
vlan id (0 and 1 are usually reserved)
                   wlan2Wpa 1.3.6.1.4.1.24350.13.23
                         wlan2WpaAuth 1.3.6.1.4.1.24350.13.23.1
                             wlan2WpaAuthArgs 1.3.6.1.4.1.24350.13.23.1.1 octet string read-write
arguments passed to authenticator
                             wlan2WpaAuthCustom 1.3.6.1.4.1.24350.13.23.1.2 octet string read-write
command used to start authenticator if .wpa.auth.type is 'custom'
                             wlan2WpaAuthInternal 1.3.6.1.4.1.24350.13.23.1.3 octet string read-write
0 for external, 1 for internal
                             wlan2WpaAuthServer 1.3.6.1.4.1.24350.13.23.1.4
                                 wlan2WpaAuthServerAddr 1.3.6.1.4.1.24350.13.23.1.4.1 octet string read-write
authentication server address
                                 wlan2WpaAuthServerPort 1.3.6.1.4.1.24350.13.23.1.4.2 integer read-write
authentication server port
                                 wlan2WpaAuthServerSharedsecret 1.3.6.1.4.1.24350.13.23.1.4.3 octet string read-write
shared secret
                             wlan2WpaAuthType 1.3.6.1.4.1.24350.13.23.1.5 octet string read-write
'hostapd' or 'custom'
                         wlan2WpaBridge 1.3.6.1.4.1.24350.13.23.2 octet string read-only
bridge if any, set by sys.l2.bridge.enable
                         wlan2WpaCa 1.3.6.1.4.1.24350.13.23.3
                             wlan2WpaCaCert 1.3.6.1.4.1.24350.13.23.3.1
                                 wlan2WpaCaCertFile 1.3.6.1.4.1.24350.13.23.3.1.1 octet string read-write
ca_cert file
                         wlan2WpaEapol 1.3.6.1.4.1.24350.13.23.4
                             wlan2WpaEapolVersion 1.3.6.1.4.1.24350.13.23.4.1 octet string read-write
2 is default, but some older clients need 1
                         wlan2WpaEnable 1.3.6.1.4.1.24350.13.23.5 octet string read-write
wpa support enabled?
                         wlan2WpaEssid 1.3.6.1.4.1.24350.13.23.6 octet string read-write
essid for wpa authentication
                         wlan2WpaIf 1.3.6.1.4.1.24350.13.23.7 octet string read-only
management frame interface, same as wlan2.if
                         wlan2WpaKeymgmt 1.3.6.1.4.1.24350.13.23.8 octet string read-write
WPA-PSK and/or WPA-EAP
                         wlan2WpaMode 1.3.6.1.4.1.24350.13.23.9 integer read-write
wpa modes: 1=wpa1, 2=wpa2, 3=both
                         wlan2WpaNode 1.3.6.1.4.1.24350.13.23.10
                               wlan2WpaNodeCert 1.3.6.1.4.1.24350.13.23.10.1
                                   wlan2WpaNodeCertFile 1.3.6.1.4.1.24350.13.23.10.1.1 octet string read-write
server_cert file
                               wlan2WpaNodeKey 1.3.6.1.4.1.24350.13.23.10.2
                                   wlan2WpaNodeKeyFile 1.3.6.1.4.1.24350.13.23.10.2.1 octet string read-write
private_key file
                                   wlan2WpaNodeKeyPassphrase 1.3.6.1.4.1.24350.13.23.10.2.2 octet string read-write
passphrase for the node's private key
                         wlan2WpaPairwise 1.3.6.1.4.1.24350.13.23.11 octet string read-write
accepted cipher suites - CCMP and/or TKIP
                         wlan2WpaPassphrase 1.3.6.1.4.1.24350.13.23.12 octet string read-write
wpa passphrase
             wlan3 1.3.6.1.4.1.24350.14
                   wlan3Acl 1.3.6.1.4.1.24350.14.1
                       wlan3AclMode 1.3.6.1.4.1.24350.14.1.1 octet string read-write
access control list mode ( 'none', 'whitelist', 'blacklist' )
                   wlan3Beaconinterval 1.3.6.1.4.1.24350.14.2 integer read-write
beacon interval in milliseconds
                   wlan3Cellid 1.3.6.1.4.1.24350.14.3 octet string read-write
cell id for adhoc mode
                   wlan3Dhcp 1.3.6.1.4.1.24350.14.4
                       wlan3DhcpAlwaysbroadcast 1.3.6.1.4.1.24350.14.4.1 octet string read-write
always broadcast dhcp responses
                       wlan3DhcpDefaultleasetime 1.3.6.1.4.1.24350.14.4.2 integer read-write
default dhcp lease expiration in seconds
                       wlan3DhcpMaxleasetime 1.3.6.1.4.1.24350.14.4.3 integer read-write
maximum requestable dhcp lease expiration in seconds
                       wlan3DhcpRelay 1.3.6.1.4.1.24350.14.4.4
                           wlan3DhcpRelayEnable 1.3.6.1.4.1.24350.14.4.4.1 octet string read-write
use dhcp relay (if sys.dhcp.relay.enable=yes)
                       wlan3DhcpReserve 1.3.6.1.4.1.24350.14.4.5 integer read-write
ip addresses to reserve at bottom of range for static assignments
                       wlan3DhcpRole 1.3.6.1.4.1.24350.14.4.6 octet string read-write
interface dhcp role (none, client, server)
                   wlan3Enable 1.3.6.1.4.1.24350.14.5 octet string read-write
interface is enabled
                   wlan3Enhsec 1.3.6.1.4.1.24350.14.6 octet string read-write
ignore clients that specify 'ANY' ssid
                   wlan3Essid 1.3.6.1.4.1.24350.14.7 octet string read-write
essid for this ap
                   wlan3Frag 1.3.6.1.4.1.24350.14.8 octet string read-write
fragmentation threshold
                   wlan3Hideessid 1.3.6.1.4.1.24350.14.9 octet string read-write
don't broadcast the essid
                   wlan3If 1.3.6.1.4.1.24350.14.10 octet string read-only
interface associated with this module
                   wlan3Ip 1.3.6.1.4.1.24350.14.11
                         wlan3IpAddress 1.3.6.1.4.1.24350.14.11.1 octet string read-only
ip address
                         wlan3IpAddressforce 1.3.6.1.4.1.24350.14.11.2 octet string read-write
override .ip.address (or blank)
                         wlan3IpBroadcast 1.3.6.1.4.1.24350.14.11.3 octet string read-only
broadcast address
                         wlan3IpBroadcastforce 1.3.6.1.4.1.24350.14.11.4 octet string read-write
override .ip.broadcast (or blank)
                         wlan3IpGateway 1.3.6.1.4.1.24350.14.11.5 octet string read-only
gateway address
                         wlan3IpGatewayforce 1.3.6.1.4.1.24350.14.11.6 octet string read-write
override .ip.gateway (or blank)
                         wlan3IpImplicit 1.3.6.1.4.1.24350.14.11.7
                             wlan3IpImplicitSize 1.3.6.1.4.1.24350.14.11.7.1
                                 wlan3IpImplicitSizeActual 1.3.6.1.4.1.24350.14.11.7.1.1 integer read-only
actual size of assigned address range
                                 wlan3IpImplicitSizeRequested 1.3.6.1.4.1.24350.14.11.7.1.2 octet string read-write
requested size of address range (multiple of 32 minus 1)
                             wlan3IpImplicitStart 1.3.6.1.4.1.24350.14.11.7.2
                                 wlan3IpImplicitStartActual 1.3.6.1.4.1.24350.14.11.7.2.1 integer read-only
actual assigned fourth octet
                                 wlan3IpImplicitStartRequested 1.3.6.1.4.1.24350.14.11.7.2.2 octet string read-write
requested interface fourth octet (multiple of 32 plus 1)
                         wlan3IpNetmask 1.3.6.1.4.1.24350.14.11.8 octet string read-only
network mask
                         wlan3IpNetmaskforce 1.3.6.1.4.1.24350.14.11.9 octet string read-write
override .ip.netmask (or blank)
                   wlan3Iwconfig 1.3.6.1.4.1.24350.14.12
                         wlan3IwconfigCmd 1.3.6.1.4.1.24350.14.12.1 octet string read-write
parameters to pass to iwconfig after all other settings
                   wlan3Iwpriv 1.3.6.1.4.1.24350.14.13
                         wlan3IwprivCmd 1.3.6.1.4.1.24350.14.13.1 octet string read-write
parameters to pass to iwpriv after all other settings
                   wlan3Key 1.3.6.1.4.1.24350.14.14 octet string read-write
wep key - if present, overrides .keys
                   wlan3Keys 1.3.6.1.4.1.24350.14.15
                         wlan3Keys1 1.3.6.1.4.1.24350.14.15.1 octet string read-write
one of four keys selected with .keys.default
                         wlan3Keys2 1.3.6.1.4.1.24350.14.15.2 octet string read-write
one of four keys selected with .keys.default
                         wlan3Keys3 1.3.6.1.4.1.24350.14.15.3 octet string read-write
one of four keys selected with .keys.default
                         wlan3Keys4 1.3.6.1.4.1.24350.14.15.4 octet string read-write
one of four keys selected with .keys.default
                         wlan3KeysDefault 1.3.6.1.4.1.24350.14.15.5 octet string read-write
1 to 4 to choose which of wlan3.keys.1-4 to use
                   wlan3Mode 1.3.6.1.4.1.24350.14.16 octet string read-write
operating mode ( ap/master, adhoc, adhoc-demo, sta/client )
                   wlan3Mtu 1.3.6.1.4.1.24350.14.17 integer read-write
maximum transmission unit - may cause serious problems if set too low
                   wlan3Radio 1.3.6.1.4.1.24350.14.18 octet string read-write
which physical radio this vap is on (0 or 1)
                   wlan3Rate 1.3.6.1.4.1.24350.14.19 octet string read-write
communications rate
                   wlan3Role 1.3.6.1.4.1.24350.14.20 octet string read-write
intended interface role (access, bridge)
                   wlan3Routes 1.3.6.1.4.1.24350.14.21
                         wlan3RoutesStatic 1.3.6.1.4.1.24350.14.21.1 octet string read-write
static routes for this interface
                   wlan3Vlan 1.3.6.1.4.1.24350.14.22
                         wlan3VlanEnable 1.3.6.1.4.1.24350.14.22.1 octet string read-write
use a vlan for this interface
                         wlan3VlanId 1.3.6.1.4.1.24350.14.22.2 integer read-write
vlan id (0 and 1 are usually reserved)
                   wlan3Wpa 1.3.6.1.4.1.24350.14.23
                         wlan3WpaAuth 1.3.6.1.4.1.24350.14.23.1
                             wlan3WpaAuthArgs 1.3.6.1.4.1.24350.14.23.1.1 octet string read-write
arguments passed to authenticator
                             wlan3WpaAuthCustom 1.3.6.1.4.1.24350.14.23.1.2 octet string read-write
command used to start authenticator if .wpa.auth.type is 'custom'
                             wlan3WpaAuthInternal 1.3.6.1.4.1.24350.14.23.1.3 octet string read-write
0 for external, 1 for internal
                             wlan3WpaAuthServer 1.3.6.1.4.1.24350.14.23.1.4
                                 wlan3WpaAuthServerAddr 1.3.6.1.4.1.24350.14.23.1.4.1 octet string read-write
authentication server address
                                 wlan3WpaAuthServerPort 1.3.6.1.4.1.24350.14.23.1.4.2 integer read-write
authentication server port
                                 wlan3WpaAuthServerSharedsecret 1.3.6.1.4.1.24350.14.23.1.4.3 octet string read-write
shared secret
                             wlan3WpaAuthType 1.3.6.1.4.1.24350.14.23.1.5 octet string read-write
'hostapd' or 'custom'
                         wlan3WpaBridge 1.3.6.1.4.1.24350.14.23.2 octet string read-only
bridge if any, set by sys.l2.bridge.enable
                         wlan3WpaCa 1.3.6.1.4.1.24350.14.23.3
                             wlan3WpaCaCert 1.3.6.1.4.1.24350.14.23.3.1
                                 wlan3WpaCaCertFile 1.3.6.1.4.1.24350.14.23.3.1.1 octet string read-write
ca_cert file
                         wlan3WpaEapol 1.3.6.1.4.1.24350.14.23.4
                             wlan3WpaEapolVersion 1.3.6.1.4.1.24350.14.23.4.1 octet string read-write
2 is default, but some older clients need 1
                         wlan3WpaEnable 1.3.6.1.4.1.24350.14.23.5 octet string read-write
wpa support enabled?
                         wlan3WpaEssid 1.3.6.1.4.1.24350.14.23.6 octet string read-write
essid for wpa authentication
                         wlan3WpaIf 1.3.6.1.4.1.24350.14.23.7 octet string read-only
management frame interface, same as wlan3.if
                         wlan3WpaKeymgmt 1.3.6.1.4.1.24350.14.23.8 octet string read-write
WPA-PSK and/or WPA-EAP
                         wlan3WpaMode 1.3.6.1.4.1.24350.14.23.9 integer read-write
wpa modes: 1=wpa1, 2=wpa2, 3=both
                         wlan3WpaNode 1.3.6.1.4.1.24350.14.23.10
                               wlan3WpaNodeCert 1.3.6.1.4.1.24350.14.23.10.1
                                   wlan3WpaNodeCertFile 1.3.6.1.4.1.24350.14.23.10.1.1 octet string read-write
server_cert file
                               wlan3WpaNodeKey 1.3.6.1.4.1.24350.14.23.10.2
                                   wlan3WpaNodeKeyFile 1.3.6.1.4.1.24350.14.23.10.2.1 octet string read-write
private_key file
                                   wlan3WpaNodeKeyPassphrase 1.3.6.1.4.1.24350.14.23.10.2.2 octet string read-write
passphrase for the node's private key
                         wlan3WpaPairwise 1.3.6.1.4.1.24350.14.23.11 octet string read-write
accepted cipher suites - CCMP and/or TKIP
                         wlan3WpaPassphrase 1.3.6.1.4.1.24350.14.23.12 octet string read-write
wpa passphrase
             wlan4 1.3.6.1.4.1.24350.15
                   wlan4Acl 1.3.6.1.4.1.24350.15.1
                       wlan4AclMode 1.3.6.1.4.1.24350.15.1.1 octet string read-write
access control list mode ( 'none', 'whitelist', 'blacklist' )
                   wlan4Beaconinterval 1.3.6.1.4.1.24350.15.2 integer read-write
beacon interval in milliseconds
                   wlan4Cellid 1.3.6.1.4.1.24350.15.3 octet string read-write
cell id for adhoc mode
                   wlan4Dhcp 1.3.6.1.4.1.24350.15.4
                       wlan4DhcpAlwaysbroadcast 1.3.6.1.4.1.24350.15.4.1 octet string read-write
always broadcast dhcp responses
                       wlan4DhcpDefaultleasetime 1.3.6.1.4.1.24350.15.4.2 integer read-write
default dhcp lease expiration in seconds
                       wlan4DhcpMaxleasetime 1.3.6.1.4.1.24350.15.4.3 integer read-write
maximum requestable dhcp lease expiration in seconds
                       wlan4DhcpRelay 1.3.6.1.4.1.24350.15.4.4
                           wlan4DhcpRelayEnable 1.3.6.1.4.1.24350.15.4.4.1 octet string read-write
use dhcp relay (if sys.dhcp.relay.enable=yes)
                       wlan4DhcpReserve 1.3.6.1.4.1.24350.15.4.5 integer read-write
ip addresses to reserve at bottom of range for static assignments
                       wlan4DhcpRole 1.3.6.1.4.1.24350.15.4.6 octet string read-write
interface dhcp role (none, client, server)
                   wlan4Enable 1.3.6.1.4.1.24350.15.5 octet string read-write
interface is enabled
                   wlan4Enhsec 1.3.6.1.4.1.24350.15.6 octet string read-write
ignore clients that specify 'ANY' ssid
                   wlan4Essid 1.3.6.1.4.1.24350.15.7 octet string read-write
essid for this ap
                   wlan4Frag 1.3.6.1.4.1.24350.15.8 octet string read-write
fragmentation threshold
                   wlan4Hideessid 1.3.6.1.4.1.24350.15.9 octet string read-write
don't broadcast the essid
                   wlan4If 1.3.6.1.4.1.24350.15.10 octet string read-only
interface associated with this module
                   wlan4Ip 1.3.6.1.4.1.24350.15.11
                         wlan4IpAddress 1.3.6.1.4.1.24350.15.11.1 octet string read-only
ip address
                         wlan4IpAddressforce 1.3.6.1.4.1.24350.15.11.2 octet string read-write
override .ip.address (or blank)
                         wlan4IpBroadcast 1.3.6.1.4.1.24350.15.11.3 octet string read-only
broadcast address
                         wlan4IpBroadcastforce 1.3.6.1.4.1.24350.15.11.4 octet string read-write
override .ip.broadcast (or blank)
                         wlan4IpGateway 1.3.6.1.4.1.24350.15.11.5 octet string read-only
gateway address
                         wlan4IpGatewayforce 1.3.6.1.4.1.24350.15.11.6 octet string read-write
override .ip.gateway (or blank)
                         wlan4IpImplicit 1.3.6.1.4.1.24350.15.11.7
                             wlan4IpImplicitSize 1.3.6.1.4.1.24350.15.11.7.1
                                 wlan4IpImplicitSizeActual 1.3.6.1.4.1.24350.15.11.7.1.1 integer read-only
actual size of assigned address range
                                 wlan4IpImplicitSizeRequested 1.3.6.1.4.1.24350.15.11.7.1.2 octet string read-write
requested size of address range (multiple of 32 minus 1)
                             wlan4IpImplicitStart 1.3.6.1.4.1.24350.15.11.7.2
                                 wlan4IpImplicitStartActual 1.3.6.1.4.1.24350.15.11.7.2.1 integer read-only
actual assigned fourth octet
                                 wlan4IpImplicitStartRequested 1.3.6.1.4.1.24350.15.11.7.2.2 octet string read-write
requested interface fourth octet (multiple of 32 plus 1)
                         wlan4IpNetmask 1.3.6.1.4.1.24350.15.11.8 octet string read-only
network mask
                         wlan4IpNetmaskforce 1.3.6.1.4.1.24350.15.11.9 octet string read-write
override .ip.netmask (or blank)
                   wlan4Iwconfig 1.3.6.1.4.1.24350.15.12
                         wlan4IwconfigCmd 1.3.6.1.4.1.24350.15.12.1 octet string read-write
parameters to pass to iwconfig after all other settings
                   wlan4Iwpriv 1.3.6.1.4.1.24350.15.13
                         wlan4IwprivCmd 1.3.6.1.4.1.24350.15.13.1 octet string read-write
parameters to pass to iwpriv after all other settings
                   wlan4Key 1.3.6.1.4.1.24350.15.14 octet string read-write
wep key - if present, overrides .keys
                   wlan4Keys 1.3.6.1.4.1.24350.15.15
                         wlan4Keys1 1.3.6.1.4.1.24350.15.15.1 octet string read-write
one of four keys selected with .keys.default
                         wlan4Keys2 1.3.6.1.4.1.24350.15.15.2 octet string read-write
one of four keys selected with .keys.default
                         wlan4Keys3 1.3.6.1.4.1.24350.15.15.3 octet string read-write
one of four keys selected with .keys.default
                         wlan4Keys4 1.3.6.1.4.1.24350.15.15.4 octet string read-write
one of four keys selected with .keys.default
                         wlan4KeysDefault 1.3.6.1.4.1.24350.15.15.5 octet string read-write
1 to 4 to choose which of wlan4.keys.1-4 to use
                   wlan4Mode 1.3.6.1.4.1.24350.15.16 octet string read-write
operating mode ( ap/master, adhoc, adhoc-demo, sta/client )
                   wlan4Mtu 1.3.6.1.4.1.24350.15.17 integer read-write
maximum transmission unit - may cause serious problems if set too low
                   wlan4Radio 1.3.6.1.4.1.24350.15.18 octet string read-write
which physical radio this vap is on (0 or 1)
                   wlan4Rate 1.3.6.1.4.1.24350.15.19 octet string read-write
communications rate
                   wlan4Role 1.3.6.1.4.1.24350.15.20 octet string read-write
intended interface role (access, bridge)
                   wlan4Routes 1.3.6.1.4.1.24350.15.21
                         wlan4RoutesStatic 1.3.6.1.4.1.24350.15.21.1 octet string read-write
static routes for this interface
                   wlan4Vlan 1.3.6.1.4.1.24350.15.22
                         wlan4VlanEnable 1.3.6.1.4.1.24350.15.22.1 octet string read-write
use a vlan for this interface
                         wlan4VlanId 1.3.6.1.4.1.24350.15.22.2 integer read-write
vlan id (0 and 1 are usually reserved)
                   wlan4Wpa 1.3.6.1.4.1.24350.15.23
                         wlan4WpaAuth 1.3.6.1.4.1.24350.15.23.1
                             wlan4WpaAuthArgs 1.3.6.1.4.1.24350.15.23.1.1 octet string read-write
arguments passed to authenticator
                             wlan4WpaAuthCustom 1.3.6.1.4.1.24350.15.23.1.2 octet string read-write
command used to start authenticator if .wpa.auth.type is 'custom'
                             wlan4WpaAuthInternal 1.3.6.1.4.1.24350.15.23.1.3 octet string read-write
0 for external, 1 for internal
                             wlan4WpaAuthServer 1.3.6.1.4.1.24350.15.23.1.4
                                 wlan4WpaAuthServerAddr 1.3.6.1.4.1.24350.15.23.1.4.1 octet string read-write
authentication server address
                                 wlan4WpaAuthServerPort 1.3.6.1.4.1.24350.15.23.1.4.2 integer read-write
authentication server port
                                 wlan4WpaAuthServerSharedsecret 1.3.6.1.4.1.24350.15.23.1.4.3 octet string read-write
shared secret
                             wlan4WpaAuthType 1.3.6.1.4.1.24350.15.23.1.5 octet string read-write
'hostapd' or 'custom'
                         wlan4WpaBridge 1.3.6.1.4.1.24350.15.23.2 octet string read-only
bridge if any, set by sys.l2.bridge.enable
                         wlan4WpaCa 1.3.6.1.4.1.24350.15.23.3
                             wlan4WpaCaCert 1.3.6.1.4.1.24350.15.23.3.1
                                 wlan4WpaCaCertFile 1.3.6.1.4.1.24350.15.23.3.1.1 octet string read-write
ca_cert file
                         wlan4WpaEapol 1.3.6.1.4.1.24350.15.23.4
                             wlan4WpaEapolVersion 1.3.6.1.4.1.24350.15.23.4.1 octet string read-write
2 is default, but some older clients need 1
                         wlan4WpaEnable 1.3.6.1.4.1.24350.15.23.5 octet string read-write
wpa support enabled?
                         wlan4WpaEssid 1.3.6.1.4.1.24350.15.23.6 octet string read-write
essid for wpa authentication
                         wlan4WpaIf 1.3.6.1.4.1.24350.15.23.7 octet string read-only
management frame interface, same as wlan4.if
                         wlan4WpaKeymgmt 1.3.6.1.4.1.24350.15.23.8 octet string read-write
WPA-PSK and/or WPA-EAP
                         wlan4WpaMode 1.3.6.1.4.1.24350.15.23.9 integer read-write
wpa modes: 1=wpa1, 2=wpa2, 3=both
                         wlan4WpaNode 1.3.6.1.4.1.24350.15.23.10
                               wlan4WpaNodeCert 1.3.6.1.4.1.24350.15.23.10.1
                                   wlan4WpaNodeCertFile 1.3.6.1.4.1.24350.15.23.10.1.1 octet string read-write
server_cert file
                               wlan4WpaNodeKey 1.3.6.1.4.1.24350.15.23.10.2
                                   wlan4WpaNodeKeyFile 1.3.6.1.4.1.24350.15.23.10.2.1 octet string read-write
private_key file
                                   wlan4WpaNodeKeyPassphrase 1.3.6.1.4.1.24350.15.23.10.2.2 octet string read-write
passphrase for the node's private key
                         wlan4WpaPairwise 1.3.6.1.4.1.24350.15.23.11 octet string read-write
accepted cipher suites - CCMP and/or TKIP
                         wlan4WpaPassphrase 1.3.6.1.4.1.24350.15.23.12 octet string read-write
wpa passphrase
             enRouteTraps 1.3.6.1.4.1.24350.100
                       enRouteConfigChange 1.3.6.1.4.1.24350.1000.1
This trap is triggered when any modification is done in the node configuration. Important note: modifying interface status on a node does not send a linkDown or linkUp trap to the NMS because the change occurs at a node reboot. Only a config change trap (this one) is sent.
                       enRouteConfigReset 1.3.6.1.4.1.24350.1000.2
This trap is triggered when the node configuration is reloaded