TPLINK-MLDSNOOPING-MIB: View SNMP OID List / Download MIB

VENDOR: TP-LINK


 Home MIB: TPLINK-MLDSNOOPING-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, TPLINK-MIB, SNMPv2-TC, TPLINK-TC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tplinkMldSnoopingMIB 1.3.6.1.4.1.11863.6.43
Private MIB for mldSnooping manage.
       tplinkMldSnoopingMIBObjects 1.3.6.1.4.1.11863.6.43.1
           tpMldSnooping 1.3.6.1.4.1.11863.6.43.1.1
               tpMldSnoopingGlobalConfig 1.3.6.1.4.1.11863.6.43.1.1.1
                   tpMldSnoopingEnable 1.3.6.1.4.1.11863.6.43.1.1.1.1 integer read-write
Select Enable/Disable MLD Snooping function globally on the Switch. 0. disable 1. enable Enumeration: 'enable': 1, 'disable': 0.
                   tpMldUnknownMulticastPacket 1.3.6.1.4.1.11863.6.43.1.1.1.2 integer read-write
Select the operation for the switch to process unknown multicast. 0. forward 1. discard Enumeration: 'forward': 0, 'discard': 1.
                   tpMldUnknownReportSuppression 1.3.6.1.4.1.11863.6.43.1.1.1.3 integer read-write
Select Enable/Disable MLD Snooping report suppression function globally on the Switch. 0. disable 1. enable Enumeration: 'enable': 1, 'disable': 0.
                   tpMldGlobalRouterTime 1.3.6.1.4.1.11863.6.43.1.1.1.4 integer read-only
Specify the aging time of the router port. Within this time, if the switch don't receive MLD query message from the router port, it will consider this port is not a router port any more,60-600 second.
                   tpMldGlobalMemberTime 1.3.6.1.4.1.11863.6.43.1.1.1.5 integer read-only
Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,60-600 second.
                   tpMldlastListenerQueryInterval 1.3.6.1.4.1.11863.6.43.1.1.1.6 integer read-only
Enter the Last Listener Query interval time. When the multicast group has no more member ports, it will send the Specific Query Message with this interval time to check whether there is another member. The interval is ranging from 1 to 5 seconds.
                   tpMldlastListenerQueryCount 1.3.6.1.4.1.11863.6.43.1.1.1.7 integer read-only
Enter the Last Listener Query numbers. When the multicast group has no more member ports, it will send this numbers of Specific Query Message to check whether there is another member. It is ranging from 1 to 5.
               tpMldPortConfig 1.3.6.1.4.1.11863.6.43.1.1.2
                   tpMldPortTable 1.3.6.1.4.1.11863.6.43.1.1.2.1 no-access
MLD Snooping (Internet Group Management Protocol Snooping) is a multicast control mechanism running on Layer 2 switch. It can effectively prevent multicast groups being broadcasted in the network.
                       tpMldPortEntry 1.3.6.1.4.1.11863.6.43.1.1.2.1.1 no-access
An entry contains of the information of port configure.
                           tpMldSnoopingPortEnable 1.3.6.1.4.1.11863.6.43.1.1.2.1.1.2 integer read-write
Select Enable/Disable MLD Snooping for the desired port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
                           tpMldFastLeavePortEnable 1.3.6.1.4.1.11863.6.43.1.1.2.1.1.3 integer read-write
Select Enable/Disable Fast Leave feature for the desired port. If Fast Leave is enabled for a port, the Switch will immediately remove this port from the multicast group upon receiving MLD leave messages. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
                           tpMldPortLag 1.3.6.1.4.1.11863.6.43.1.1.2.1.1.4 octet string read-only
Displays the LAG number which the port belongs to.
               tpMldVlanConfig 1.3.6.1.4.1.11863.6.43.1.1.3
                   tpMldVlanTable 1.3.6.1.4.1.11863.6.43.1.1.3.1 no-access
Multicast groups established by MLD Snooping are based on VLANs. You can configure different MLD parameters for different VLANs.
                       tpMldVlanEntry 1.3.6.1.4.1.11863.6.43.1.1.3.1.1 no-access
An entry contains of the information of mldsnooping.
                           tpMldVlanId 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.1 integer read-only
Enter the VLAN ID to enable MLD Snooping for the desired VLAN,1-4094.
                           tpMldRouterTime 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.2 integer read-only
Specify the aging time of the router port. Within this time, if the switch don't receive MLD query message from the router port, it will consider this port is not a router port any more,0,60-600 second.
                           tpMldMemberTime 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.3 integer read-only
Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,0,60-600 second.
                           tpMldRouterPort 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.4 octet string read-only
Config the static router ports which are mainly used in the network with stable topology.
                           tpMldForbiddenRouterPort 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.5 octet string read-only
Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports.
                           tpMldVlanStatus 1.3.6.1.4.1.11863.6.43.1.1.3.1.1.6 tprowstatus read-only
the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
               tpMldMultiVlanConfig 1.3.6.1.4.1.11863.6.43.1.1.4
                   tpMldMultiVlanId 1.3.6.1.4.1.11863.6.43.1.1.4.1 integer read-write
Enter the VLAN ID of the multicast VLAN,2-4094.If enter 0, multicast VLAN is disabled.
                   tpMldMultitRouterTime 1.3.6.1.4.1.11863.6.43.1.1.4.2 integer read-write
Specify the aging time of the router port. Within this time, if the switch don't receive MLD query message from the router port, it will consider this port is not a router port any more,0,60-600 second.
                   tpMldMultiMemberTime 1.3.6.1.4.1.11863.6.43.1.1.4.3 integer read-write
Specify the aging time of the member port. Within this time, if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,0,60-600 second.
                   tpMldMultiRouterPort 1.3.6.1.4.1.11863.6.43.1.1.4.4 octet string read-write
Config the static router ports which are mainly used in the network with stable topology.
                   tpMldMultiForbiddenRouterPort 1.3.6.1.4.1.11863.6.43.1.1.4.5 octet string read-write
Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports.
                   tpMldMultiReplaceSrcIp 1.3.6.1.4.1.11863.6.43.1.1.4.6 octet string read-only
config the source ip which will replace the source ip of MLD report in multicast vlan.
               tpMldQuerierConfig 1.3.6.1.4.1.11863.6.43.1.1.5
                   mldQuerierTable 1.3.6.1.4.1.11863.6.43.1.1.5.1 no-access
MLD Snooping Querier is based on VLAN. You can configure different MLD Snooping Querier parameters for different VLANs.
                       mldQuerierEntry 1.3.6.1.4.1.11863.6.43.1.1.5.1.1 no-access
An entry contains of the information of MLD Snooping Querier.
                           mldQuerierVlanId 1.3.6.1.4.1.11863.6.43.1.1.5.1.1.1 integer read-only
Enter the VLAN ID to enable MLD Snooping Querier for the desired VLAN, ranging from 1 to 4094.
                           mldQueryInterval 1.3.6.1.4.1.11863.6.43.1.1.5.1.1.2 integer read-only
Enter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds.
                           mldMaxResponseTime 1.3.6.1.4.1.11863.6.43.1.1.5.1.1.3 integer read-only
Enter the value of Maximum Response Time field of the Query message. The host is expected to response to an MLD general query within this time. The time is ranging from 1 to 25 seconds.
                           mldGeneralQuerySrcIp 1.3.6.1.4.1.11863.6.43.1.1.5.1.1.4 octet string read-only
Enter the General Query Message source IP address.
                           mldQuerierStatus 1.3.6.1.4.1.11863.6.43.1.1.5.1.1.5 tprowstatus read-only
The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory the entry.
           tpMldFilter 1.3.6.1.4.1.11863.6.43.1.2
               tpMldPortFilterConfig 1.3.6.1.4.1.11863.6.43.1.2.1
                   tpMldFilterPortTable 1.3.6.1.4.1.11863.6.43.1.2.1.1 no-access
When the switch receives MLD report message, it examines the multicast filtering IP ID configured on the access port to determine if the port can join the multicast group. If the multicast IP is not filtered, the switch will add the port to the forward port list of the multicast group. Otherwise, the switch will drop the MLD report message. In that way, you can control the multicast groups that users can access.
                       tpMldFilterPortEntry 1.3.6.1.4.1.11863.6.43.1.2.1.1.1 no-access
An entry contains of the information of a port param.
                           tpMldFilterMaxGroup 1.3.6.1.4.1.11863.6.43.1.2.1.1.1.2 integer read-write
Specify the maximum number of multicast groups to prevent some ports taking up too much bandwidth.
                           tpMldFilterMaxGroupAction 1.3.6.1.4.1.11863.6.43.1.2.1.1.1.3 integer read-write
The policy should be taken when the number of multicast group a port has joined reach the maximum. 0.Drop: drop the successive report packet, and this port can not join any other multicast group. 1.Replace: when the port joins another new multicast group,it will quit the existing multicast group randomly. Enumeration: 'drop': 0, 'replace': 1.
                           tpMldFilterBindAddrId 1.3.6.1.4.1.11863.6.43.1.2.1.1.1.4 octet string read-write
Enter the profile ID the port will be bound to. Only one profile can be bound to each port.
                           tpMldFilterPortLag 1.3.6.1.4.1.11863.6.43.1.2.1.1.1.5 octet string read-only
Displays the LAG number which the port belongs to.
           tpMldPacketStatistic 1.3.6.1.4.1.11863.6.43.1.3
               tpMldPktStat 1.3.6.1.4.1.11863.6.43.1.3.1
                   tpMldPktStatTable 1.3.6.1.4.1.11863.6.43.1.3.1.1 no-access
A list of multicast statistic Table.
                       tpMldPktStatEntry 1.3.6.1.4.1.11863.6.43.1.3.1.1.1 no-access
An entry contains of multicast packet statistics over each port.
                           tpMldQueryPktStat 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.2 integer read-only
Displays the number of query packets the port received.
                           tpMldReportV1PktStat 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.3 integer read-only
Displays the number of MLDv1 report packets the port received.
                           tpMldReportV2PktStat 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.4 integer read-only
Displays the number of MLDv2 report packets the port received.
                           tpMldDonePktStat 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.6 integer read-only
Displays the number of done packets the port received.
                           tpMldErrorPktStat 1.3.6.1.4.1.11863.6.43.1.3.1.1.1.7 integer read-only
Displays the number of error packets the port received.
                   tpIpMldPktStatClear 1.3.6.1.4.1.11863.6.43.1.3.1.2 integer read-write
mld packet statistic clear. Enumeration: 'commit': 1.
           tpMldMultigroup 1.3.6.1.4.1.11863.6.43.1.4
               tpMldMulticastGroups 1.3.6.1.4.1.11863.6.43.1.4.1
                   tpMldMulticastGroupTable 1.3.6.1.4.1.11863.6.43.1.4.1.1 no-access
A list of multicast groups Table.
                       tpMldMulticastGroupEntry 1.3.6.1.4.1.11863.6.43.1.4.1.1.1 no-access
An entry contains of multicast packet statistics over each port.
                           tpMldMulticastIP 1.3.6.1.4.1.11863.6.43.1.4.1.1.1.1 octet string read-only
Displays the multicast IP address.
                           tpMldVlanID 1.3.6.1.4.1.11863.6.43.1.4.1.1.1.2 integer read-only
Displays the VLAN ID.
                           tpMldForwardPorts 1.3.6.1.4.1.11863.6.43.1.4.1.1.1.3 octet string read-only
Displays the forward ports of multicast group.
                           tpMldGrouptype 1.3.6.1.4.1.11863.6.43.1.4.1.1.1.4 integer read-only
Displays the type of multicast group. Enumeration: 'dynamic': 1, 'static': 0.
           tpMldStaticMultigroup 1.3.6.1.4.1.11863.6.43.1.5
               tpMldMulticastStaticGroups 1.3.6.1.4.1.11863.6.43.1.5.1
                   tpMldMulticastStaticGroupTable 1.3.6.1.4.1.11863.6.43.1.5.1.1 no-access
A list of multicast groups Table.
                       tpMldMulticastStaticGroupEntry 1.3.6.1.4.1.11863.6.43.1.5.1.1.1 no-access
An entry contains of multicast packet statistics over each port.
                           tpMldStaticMulticastIP 1.3.6.1.4.1.11863.6.43.1.5.1.1.1.1 octet string read-only
The multicast IP address.
                           tpMldStaticVlanID 1.3.6.1.4.1.11863.6.43.1.5.1.1.1.2 integer read-only
The VLAN ID.
                           tpMldStaticForwardPorts 1.3.6.1.4.1.11863.6.43.1.5.1.1.1.3 octet string read-only
The forward ports of multicast group.
                           tpMldStaticGroupStatus 1.3.6.1.4.1.11863.6.43.1.5.1.1.1.4 tprowstatus read-only
The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
       tplinkMldSnoopingNotifications 1.3.6.1.4.1.11863.6.43.2