TPLINK-LLDPCONFIG-MIB: View SNMP OID List / Download MIB

VENDOR: TP-LINK


 Home MIB: TPLINK-LLDPCONFIG-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, TPLINK-LLDP-MIB, SNMPv2-TC, TPLINK-TC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lldpConfig 1.3.6.1.4.1.11863.6.35.1.1
     lldpGlobalConfig 1.3.6.1.4.1.11863.6.35.1.1.1
         lldpGlobalConfigEnable 1.3.6.1.4.1.11863.6.35.1.1.1.1 integer read-write
Select Enable/Disable LLDP function globally on the Switch. 0. disable 1. enable Enumeration: 'enable': 1, 'disable': 0.
         lldpGlobalConfigTxInterval 1.3.6.1.4.1.11863.6.35.1.1.1.2 integer read-write
The interval of the local device send the LLDPDU to the neighbor device.
         lldpGlobalConfigTtl 1.3.6.1.4.1.11863.6.35.1.1.1.3 integer read-write
TTL multiplier determines the TTL value in the LLDPDU packet which the local device send to the neighbor device. TTL value is the time of the local information enabled in the neighbor device, TTL value = TTL multiplier * interval
         lldpGlobalConfigTxDelay 1.3.6.1.4.1.11863.6.35.1.1.1.4 integer read-write
The delay time of the local device send the LLDPDU packet to the neighbor device. When the config of the local device is changed, it will notify the neighbor device after the setting time delay, which can avoid continually sending the LLPDDU packet to the neighbor device when local device continually change the config.
         lldpGlobalConfigInitDelay 1.3.6.1.4.1.11863.6.35.1.1.1.5 integer read-write
When the LLDP mode is changed, the device will initialize after a setting time delay, which can avoid continually initialized when the device continually change the LLDP mode .
         lldpGlobalConfigTrap 1.3.6.1.4.1.11863.6.35.1.1.1.6 integer read-write
The interval of sending the trap information. When a trap event has happened,just as finded a new neighbor or the neighbor information has changed,the local device would send a trap information to the SNMP server.
         lldpGlobalConfigFastCount 1.3.6.1.4.1.11863.6.35.1.1.1.7 integer read-write
When the LLDP mode of the port changed from disable(or just receive) to send and receive(or just send), the quick send mechanism will be enabled for other device find the local device as fast as it can,and at this time, the LLDP packet is sended per second, and it get right after sended the setting num LLDPDU packet.
     lldpPortConfigTable 1.3.6.1.4.1.11863.6.35.1.1.2 no-access
A table that contains LLDP information of every port.
         lldpPortConfigEntry 1.3.6.1.4.1.11863.6.35.1.1.2.1 no-access
A list of LLDP information for every port of the device.
             lldpConfigPortId 1.3.6.1.4.1.11863.6.35.1.1.2.1.1 octet string read-only
The port id of the switch.
             lldpConfigPortStatus 1.3.6.1.4.1.11863.6.35.1.1.2.1.2 integer read-write
Select Enable/Disable Tx/Rx for the Port. 0. Disable 1. EnableTx 2. EnableRx 3. EnableRxTx Enumeration: 'enableTx': 1, 'enableRxTx': 3, 'disable': 0, 'enableRx': 2.
             lldpConfigPortSnmpNotifyEnable 1.3.6.1.4.1.11863.6.35.1.1.2.1.3 integer read-write
Select Enable/Disable Snmp Notify for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvDescr 1.3.6.1.4.1.11863.6.35.1.1.2.1.4 integer read-write
Select Enable/Disable TLV description for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvSysCap 1.3.6.1.4.1.11863.6.35.1.1.2.1.5 integer read-write
Select Enable/Disable TLV system cap for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvSysDescr 1.3.6.1.4.1.11863.6.35.1.1.2.1.6 integer read-write
Select Enable/Disable TLV System description for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvSysName 1.3.6.1.4.1.11863.6.35.1.1.2.1.7 integer read-write
Select Enable/Disable TLV System name for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvManageAddr 1.3.6.1.4.1.11863.6.35.1.1.2.1.8 integer read-write
Select Enable/Disable TLV manage address for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvPortVlanId 1.3.6.1.4.1.11863.6.35.1.1.2.1.9 integer read-write
Select Enable/Disable TLV port Vlan ID for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvProtoVlanId 1.3.6.1.4.1.11863.6.35.1.1.2.1.10 integer read-write
Select Enable/Disable TLV Portocol VlanId for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvVlanName 1.3.6.1.4.1.11863.6.35.1.1.2.1.11 integer read-write
Select Enable/Disable TLV Vlan name for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvLinkAggre 1.3.6.1.4.1.11863.6.35.1.1.2.1.12 integer read-write
Select Enable/Disable TLV link aggre for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvPortStatus 1.3.6.1.4.1.11863.6.35.1.1.2.1.13 integer read-write
Select Enable/Disable TLV port status for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvMaxFrame 1.3.6.1.4.1.11863.6.35.1.1.2.1.14 integer read-write
Select Enable/Disable TLV max frame for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.
             lldpConfigPortTlvPower 1.3.6.1.4.1.11863.6.35.1.1.2.1.15 integer read-write
Select Enable/Disable TLV power for the Port. 0. Disable 1. Enable Enumeration: 'enable': 1, 'disable': 0.