TN-MRP-MIB: View SNMP OID List / Download MIB

VENDOR: TRANSITION ENGINEERING INC.


 Home MIB: TN-MRP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, IEC-62439-2-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tnMrpMIB 1.3.6.1.4.1.868.2.5.120
A MIB module provides Media Redundancy Protocol Statistics interface.
         tnMrpObjects 1.3.6.1.4.1.868.2.5.120.1
             tnMrpDomainTable 1.3.6.1.4.1.868.2.5.120.1.1 no-access
Every entry in this table contains additional information about a Media Redundancy Protocol (MRP) domain. Row entries can not be created or deleted via SNMP operations.
                 tnMrpDomainEntry 1.3.6.1.4.1.868.2.5.120.1.1.1 no-access
An entry in the tnMrpDomainTable.
                     tnMrpDomainTopologyChangeInterval 1.3.6.1.4.1.868.2.5.120.1.1.1.1 integer32 read-only
This attribute specifies the interval for sending MRP_TopologyChange frames.
                     tnMrpDomainTopologyChangeRepeatCount 1.3.6.1.4.1.868.2.5.120.1.1.1.2 integer32 read-only
This attribute specifies the interval count which controls repeated transmissions of MRP_TopologyChange frames.
                     tnMrpDomainDefaultTestInterval 1.3.6.1.4.1.868.2.5.120.1.1.1.3 integer32 read-only
This attribute specifies the default interval for sending MRP_Test frames on ring ports.
                     tnMrpDomainShortTestInterval 1.3.6.1.4.1.868.2.5.120.1.1.1.4 integer32 read-only
This attribute specifies the short interval for sending MRP_Test frames on ring ports after link changes in the ring.
                     tnMrpDomainTestMonitoringCount 1.3.6.1.4.1.868.2.5.120.1.1.1.5 integer32 read-only
This attribute specifies the interval count for monitoring the reception of MRP_Test frames.
                     tnMrpDomainNonBlockingMRCsupported 1.3.6.1.4.1.868.2.5.120.1.1.1.6 integer read-only
This attribute specifies the ability of the MRM to support MRCs without BLOCKED port state support in the ring. Enumeration: 'disabled': 2, 'enabled': 1.
                     tnMrpDomainTestMonitoringExtendedCount 1.3.6.1.4.1.868.2.5.120.1.1.1.7 integer32 read-only
This attribute specifies the extended interval count for monitoring the reception of MRP_Test frames.
                     tnMrpDomainCheckMediaRedundancy 1.3.6.1.4.1.868.2.5.120.1.1.1.8 integer read-only
This attribute specifies whether monitoring of MRM state is enabled or disabled in the redundancy domain. Enumeration: 'disabled': 2, 'enabled': 1.
                     tnMrpDomainLinkDownInterval 1.3.6.1.4.1.868.2.5.120.1.1.1.9 integer32 read-only
This attribute specifies the interval for sending MRP_LinkDown frames on ring ports.
                     tnMrpDomainLinkUpInterval 1.3.6.1.4.1.868.2.5.120.1.1.1.10 integer32 read-only
This attribute specifies the interval for sending MRP_LinkUp frames on ring ports.
                     tnMrpDomainLinkChangeCount 1.3.6.1.4.1.868.2.5.120.1.1.1.11 integer32 read-only
This attribute specifies the MRP_LinkChange frame count which controls repeated transmission of MRP_LinkChange frames.
             tnMrpDomainStatTable 1.3.6.1.4.1.868.2.5.120.1.2 no-access
Every entry in this table contains statistics about a Media Redundancy Protocol (MRP) domain. Entries cannot be created or deleted via SNMP operations.
                 tnMrpDomainStatEntry 1.3.6.1.4.1.868.2.5.120.1.2.1 no-access
An entry in the mrpDomainStatTable.
                     tnMrpDomainTransmitTotalCount 1.3.6.1.4.1.868.2.5.120.1.2.1.1 counter64 read-only
The total transmitted frames.
                     tnMrpDomainReceiveTotalCount 1.3.6.1.4.1.868.2.5.120.1.2.1.2 counter64 read-only
The total received frames.
                     tnMrpDomainReceiveErrorTotalCount 1.3.6.1.4.1.868.2.5.120.1.2.1.3 counter64 read-only
The total received frames with error.
                     tnMrpDomainReceiveUnrecognizedCount 1.3.6.1.4.1.868.2.5.120.1.2.1.4 counter64 read-only
The total unrecognized received frames.
             tnMrpDomainStatTableReset 1.3.6.1.4.1.868.2.5.120.1.3 truthvalue read-write
Write true(1) will cause a reset of all statistic values
             tnMrpDomainEventTable 1.3.6.1.4.1.868.2.5.120.1.4 read-only
Every entry in this table contains event about a Media Redundancy Protocol (MRP) domain. Entries cannot be created or deleted via SNMP operations.
                 tnMrpDomainEventEntry 1.3.6.1.4.1.868.2.5.120.1.4.1 no-access
An entry in the mrpDomainEventTable.
                     tnMrpDomainEventIndex 1.3.6.1.4.1.868.2.5.120.1.4.1.1 unsigned32 no-access
An arbitrary integer for identifying individual events within the event log.
                     tnMrpDomainEventTimestamp 1.3.6.1.4.1.868.2.5.120.1.4.1.2 timestamp read-only
The value of sysUpTime at the time of the logged event.
                     tnMrpDomainEventType 1.3.6.1.4.1.868.2.5.120.1.4.1.3 tnmrpeventtype read-only
Event type
                     tnMrpDomainEventAppear 1.3.6.1.4.1.868.2.5.120.1.4.1.4 tnmrpeventappear read-only
Event appear or disappear
             tnMrpDomainEventTableReset 1.3.6.1.4.1.868.2.5.120.1.5 truthvalue read-write
Write true(1) will cause a reset of all events