TN-LINK-OAM-MIB: View SNMP OID List / Download MIB

VENDOR: TRANSITION ENGINEERING INC.


 Home MIB: TN-LINK-OAM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DOT3-OAM-MIB, TRANSITION-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tnLinkOamMIB 1.3.6.1.4.1.868.2.5.140
The mib module for managing Link OAM.
         tnLinkOamNotifications 1.3.6.1.4.1.868.2.5.140.0
         tnLinkOamObjects 1.3.6.1.4.1.868.2.5.140.1
             tnLinkOamPortConfigTable 1.3.6.1.4.1.868.2.5.140.1.1 no-access
This table allows the user to inspect the current Link OAM port configurations, and change them as well.
                 tnLinkOamPortConfigEntry 1.3.6.1.4.1.868.2.5.140.1.1.1 no-access
An entry in the table that contains information of OAM port configurations.
                     tnLinkOamLoopbackSupport 1.3.6.1.4.1.868.2.5.140.1.1.1.1 integer read-write
Controls whether the loopback support is enabled for the switch port. Link OAM remote loopback can be used for fault localization and link performance testing. Enabling the loopback support will allow the DTE to execute the remote loopback command that helps in the fault detection. Enumeration: 'enable': 1, 'disable': 2.
                     tnLinkOamLinkMonitorSupport 1.3.6.1.4.1.868.2.5.140.1.1.1.2 integer read-write
Controls whether the Link Monitor support is enabled for the switch port. On enabling the Link Monitor support, the DTE supports event notification that permits the inclusion of diagnostic information. Enumeration: 'enable': 1, 'disable': 2.
                     tnLinkMIBRetrievalSupport 1.3.6.1.4.1.868.2.5.140.1.1.1.3 integer read-write
Controls whether the MIB Retrieval Support is enabled for the switch port. On enabling the MIB retrieval support, the DTE supports polling of various Link OAM based MIB variables' contents. Enumeration: 'enable': 1, 'disable': 2.
                     tnLinkOamLoopbackOperation 1.3.6.1.4.1.868.2.5.140.1.1.1.4 integer read-write
If the Loopback support is enabled, enabling this field will start a loopback operation for the port. Enumeration: 'enable': 1, 'disable': 2.
             tnLinkOamStatisticsTable 1.3.6.1.4.1.868.2.5.140.1.2 no-access
This table contains statistics for the OAM function on a particular Ethernet-like interface. There is an entry in the table for every entry in the tnLinkOamTable. The displayed counters represent the total number of OAM frames received and transmitted for the selected port. Discontinuities of these counter can occur at re-initialization of the management system.
                 tnLinkOamStatisticsEntry 1.3.6.1.4.1.868.2.5.140.1.2.1 no-access
An entry in the table containing statistics information on the Ethernet OAM function for a single Ethernet-like interface.
                     tnLinkOamLinkfaultPDUsRx 1.3.6.1.4.1.868.2.5.140.1.2.1.1 counter32 read-only
A count of the number of Link fault PDU's received.
                     tnLinkOamLinkfaultPDUsTx 1.3.6.1.4.1.868.2.5.140.1.2.1.2 counter32 read-only
A count of the number of Link fault PDU's transmitted.
                     tnLinkOamDyingGaspRx 1.3.6.1.4.1.868.2.5.140.1.2.1.3 counter32 read-only
A count of the number of Dying Gasp events received.
                     tnLinkOamDyingGaspTx 1.3.6.1.4.1.868.2.5.140.1.2.1.4 counter32 read-only
A count of the number of Dying Gasp events transmitted.
                     tnLinkOamCriticalEventPDUsRx 1.3.6.1.4.1.868.2.5.140.1.2.1.5 counter32 read-only
A count of the number of Critical event PDU's received.
                     tnLinkOamCriticalEventPDUsTx 1.3.6.1.4.1.868.2.5.140.1.2.1.6 counter32 read-only
A count of the number of Critical event PDU's transmitted.
             tnLinkOamLocalPortConfigStatusTable 1.3.6.1.4.1.868.2.5.140.1.3 no-access
This table provides Local Link OAM configuration operational status.
                 tnLinkOamLocalPortConfigStatusEntry 1.3.6.1.4.1.868.2.5.140.1.3.1 no-access
An entry in the table containing information of Peer Link OAM configuration operational status.
                     tnLinkOamPDUPermission 1.3.6.1.4.1.868.2.5.140.1.3.1.1 integer read-only
This field is available only for the Local DTE. It displays the current permission rules set for the local DTE. Possible values are 'Link fault', 'Receive only', 'Information exchange only', 'ANY'. Enumeration: 'informationexchangeonly': 3, 'linkfault': 1, 'receiveonly': 2, 'any': 4.
                     tnLinkOamLocalMultiplexerState 1.3.6.1.4.1.868.2.5.140.1.3.1.2 integer read-only
When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's. Enumeration: 'discarding': 2, 'forwarding': 1.
                     tnLinkOamLocalParserState 1.3.6.1.4.1.868.2.5.140.1.3.1.3 integer read-only
When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs. Enumeration: 'discarding': 3, 'forwarding': 1, 'loopback': 2.
                     tnLinkOamLocalOrganizationalUniqueIdentifi 1.3.6.1.4.1.868.2.5.140.1.3.1.4 displaystring read-only
24-bit Organizationally Unique Identifier of the vendor.
             tnLinkOamPeerPortConfigStatusTable 1.3.6.1.4.1.868.2.5.140.1.4 no-access
This table provides Peer Link OAM configuration operational status.
                 tnLinkOamPeerPortConfigStatusEntry 1.3.6.1.4.1.868.2.5.140.1.4.1 no-access
An entry in the table containing information of Peer Link OAM configuration operational status.
                     tnLinkOamPeerMultiplexerState 1.3.6.1.4.1.868.2.5.140.1.4.1.1 integer read-only
When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's. Enumeration: 'discarding': 2, 'forwarding': 1.
                     tnLinkOamPeerParserState 1.3.6.1.4.1.868.2.5.140.1.4.1.2 integer read-only
When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs. Enumeration: 'discarding': 3, 'forwarding': 1, 'loopback': 2.
                     tnLinkOamPeerOrganizationalUniqueIdentifi 1.3.6.1.4.1.868.2.5.140.1.4.1.3 displaystring read-only
24-bit Organizationally Unique Identifier of the vendor.
             tnLinkOamLinkEventStatusTable 1.3.6.1.4.1.868.2.5.140.1.5 no-access
This table shows frame error status.
                 tnLinkOamLinkEventStatusEntry 1.3.6.1.4.1.868.2.5.140.1.5.1 no-access
An entry in the table containing information of frame error status.
                     tnLinkOamLocationIndex 1.3.6.1.4.1.868.2.5.140.1.5.1.1 unsigned32 no-access
The index of the loacation of the OAM unit event status accessed. When the value of index is '1', the table will display the Event status for the Local OAM unit. While the value is '2', the table will display the status for the Peer for the respective port.
                     tnLinkOamSequenceNumber 1.3.6.1.4.1.868.2.5.140.1.5.1.2 counter32 read-only
This two-octet field indicates the total number of events occurred at the remote end.
                     tnLinkOamFrameErrorEventTimestamp 1.3.6.1.4.1.868.2.5.140.1.5.1.3 timestamp read-only
This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.
                     tnLinkOamFrameErrorEventWindow 1.3.6.1.4.1.868.2.5.140.1.5.1.4 counter32 read-only
This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1) The default value is one second. 2) The lower bound is one second. 3) The upper bound is one minute.
                     tnLinkOamFrameErrorEventThreshold 1.3.6.1.4.1.868.2.5.140.1.5.1.5 counter32 read-only
This four-octet field indicates the number of detected errored frames in the period is required to be equal to or greater than in order for the event to be generated. 1) The default value is one frame error. 2) The lower bound is zero frame errors. 3) The upper bound is unspecified.
                     tnLinkOamFrameErrors 1.3.6.1.4.1.868.2.5.140.1.5.1.6 counter32 read-only
This four-octet field indicates the number of detected errored frames in the period.
                     tnLinkOamTotalFrameErrors 1.3.6.1.4.1.868.2.5.140.1.5.1.7 counter64 read-only
This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset.
                     tnLinkOamTotalFrameErrorEvents 1.3.6.1.4.1.868.2.5.140.1.5.1.8 counter32 read-only
This four-octet field indicates the number of Errored Frame Event TLVs that have been generated since the OAM sublayer was reset.
                     tnLinkOamFramePeriodErrorEventTimestamp 1.3.6.1.4.1.868.2.5.140.1.5.1.9 timestamp read-only
This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.
                     tnLinkOamFramePeriodErrorEventWindow 1.3.6.1.4.1.868.2.5.140.1.5.1.10 counter32 read-only
This four-octet field indicates the duration of period in terms of frames.
                     tnLinkOamFramePeriodErrorEventThreshold 1.3.6.1.4.1.868.2.5.140.1.5.1.11 counter32 read-only
This four-octet field indicates the number of errored frames in the period is required to be equal to or greater than in order for the event to be generated.
                     tnLinkOamFramePeriodsErrors 1.3.6.1.4.1.868.2.5.140.1.5.1.12 counter32 read-only
This four-octet field indicates the number of frame errors in the period.
                     tnLinkOamTotalFramePeriodsErrors 1.3.6.1.4.1.868.2.5.140.1.5.1.13 counter64 read-only
This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset.
                     tnLinkOamTotalFramePerioderrorEvents 1.3.6.1.4.1.868.2.5.140.1.5.1.14 counter32 read-only
This four-octet field indicates the number of Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset.
                     tnLinkOamSymbolPeriodErrorEventTimestamp 1.3.6.1.4.1.868.2.5.140.1.5.1.15 timestamp read-only
This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.
                     tnLinkOamSymbolPeriodErrorEventWindow 1.3.6.1.4.1.868.2.5.140.1.5.1.16 counter64 read-only
This eight-octet field indicates the number of symbols in the period.
                     tnLinkOamSymbolPeriodErrorEventThreshold 1.3.6.1.4.1.868.2.5.140.1.5.1.17 counter64 read-only
This eight-octet field indicates the number of errored symbols in the period is required to be equal to or greater than in order for the event to be generated.
                     tnLinkOamSymbolPeriodsErrors 1.3.6.1.4.1.868.2.5.140.1.5.1.18 counter64 read-only
This eight-octet field indicates the number of symbol errors in the period.
                     tnLinkOamSymbolFramePeriodErrors 1.3.6.1.4.1.868.2.5.140.1.5.1.19 counter64 read-only
This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset.
                     tnLinkOamTotalSymbolFramePerioderrorEvents 1.3.6.1.4.1.868.2.5.140.1.5.1.20 counter32 read-only
This four-octet field indicates the number of Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset.
                     tnLinkOamEventSecondsSummaryTimestamp 1.3.6.1.4.1.868.2.5.140.1.5.1.21 timestamp read-only
This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals, encoded as a 16-bit unsigned integer.
                     tnLinkOamEventSecondsSummaryWindow 1.3.6.1.4.1.868.2.5.140.1.5.1.22 counter32 read-only
This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer.
                     tnLinkOamEventSecondsSummaryThreshold 1.3.6.1.4.1.868.2.5.140.1.5.1.23 counter32 read-only
This two-octet field indicates the number of errored frame seconds in the period is required to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer.
                     tnLinkOamEventSecondsSummarysEvents 1.3.6.1.4.1.868.2.5.140.1.5.1.24 counter32 read-only
This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer.
                     tnLinkOamEventSecondsSummaryErrorTotal 1.3.6.1.4.1.868.2.5.140.1.5.1.25 counter32 read-only
This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset.
                     tnLinkOamTotalEventSecondsSummaryEventTotal 1.3.6.1.4.1.868.2.5.140.1.5.1.26 counter32 read-only
This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer.
         tnLinkOamConformance 1.3.6.1.4.1.868.2.5.140.2