TN-ETHSOAM-MIB: View SNMP OID List / Download MIB

VENDOR: TRANSITION ENGINEERING INC.


 Home MIB: TN-ETHSOAM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, IEEE8021-TC-MIB, Q-BRIDGE-MIB, TRANSITION-SMI, SNMPv2-TC, IEEE8021-CFM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tnEthSoamMIB 1.3.6.1.4.1.868.2.5.105
TBD
         tnEthSoamMIBNotifications 1.3.6.1.4.1.868.2.5.105.0
             tnEthSoamFaultAlarm 1.3.6.1.4.1.868.2.5.105.0.1
An EthSoam has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the EthSoam that has detected the fault. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the EthSoam reporting the defect by the indices in the OID of the variables in the notification: tnEthSoamInstance - Also the index of the EthSoam status table entry (tnEthSoamStatusTable).
             tnEthSoamPeerFaultAlarm 1.3.6.1.4.1.868.2.5.105.0.2
An EthSoamPeer has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the EthSoamPeer that has detected the fault. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the EthSoamPeer reporting the defect by the indices in the OID of the variables in the notification: tnEthSoamInstance - Also the index of the EthSoam Peer status table entry (tnEthSoamPeerStatusTable). tnEthSoamPeerStatusMepId - Also the index of the EthSoam Peer status table entry (tnEthSoamPeerStatusTable).
         tnEthSoamMIBObjects 1.3.6.1.4.1.868.2.5.105.1
             tnEthSoamMPMgmt 1.3.6.1.4.1.868.2.5.105.1.1
                 tnEthSoamMPTable 1.3.6.1.4.1.868.2.5.105.1.1.1 no-access
This table provides configuration of SOAM Maintenance Point.
                     tnEthSoamMPEntry 1.3.6.1.4.1.868.2.5.105.1.1.1.1 no-access
A entry in the table represents a configuration for local SOAM.
                         tnEthSoaminstance 1.3.6.1.4.1.868.2.5.105.1.1.1.1.1 unsigned32 no-access
This is the configuration of the two possible Maintenance Association Identifier formats. ITU ICC: This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7 char. IEEE String: This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG id' can be max. 8 char.
                         tnEthSoamDomaintype 1.3.6.1.4.1.868.2.5.105.1.1.1.1.2 tnethsoamtype read-only
The Domain Mode affects the OAM. The allowed values are Port: This is a MEP in the Port Domain. 'Flow Instance' is a Port. Esp: Future use. Evc: This is a MEP in the EVC Domain. 'Flow Instance' is a EVC. Mpls: Future use. Vlan: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN.
                         tnEthSoamMode 1.3.6.1.4.1.868.2.5.105.1.1.1.1.3 integer read-only
MEP: This is a Maintenance Entity End Point. MIP: This is a Maintenance Entity Intermediate Point. Enumeration: 'mip': 2, 'mep': 1.
                         tnEthSoamdirection 1.3.6.1.4.1.868.2.5.105.1.1.1.1.4 dot1agcfmmpdirection read-only
Direction in which the MP faces on the Bridge Port.
                         tnEthSoamresidencePort 1.3.6.1.4.1.868.2.5.105.1.1.1.1.5 interfaceindex read-only
This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached.
                         tnEthSoamlevel 1.3.6.1.4.1.868.2.5.105.1.1.1.1.6 dot1agcfmmdlevel read-only
Level of the Maintenance Point.
                         tnEthSoamFlowInstance 1.3.6.1.4.1.868.2.5.105.1.1.1.1.7 integer read-only
The MEP is related to this flow - See 'Domain'.
                         tnEthSoamTaggedVID 1.3.6.1.4.1.868.2.5.105.1.1.1.1.8 vlanidornone read-only
Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this VID. Entering '0' means no TAG added.
                         tnEthSoamAlarm 1.3.6.1.4.1.868.2.5.105.1.1.1.1.9 truthvalue read-only
An active alarm on the MEP.
                         tnEthSoamStatus 1.3.6.1.4.1.868.2.5.105.1.1.1.1.11 rowstatus read-only
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
             tnEthSoamPeerCfgMgmt 1.3.6.1.4.1.868.2.5.105.1.2
                 tnEthSoamPeerCfgTable 1.3.6.1.4.1.868.2.5.105.1.2.1 no-access
This table has entries which generate a configuration for peer SOAM.
                     tnEthSoamPeerCfgEntry 1.3.6.1.4.1.868.2.5.105.1.2.1.1 no-access
A entry in the table represents a configuration for peer SOAM.
                         tnEthSoamPeerCfgMepId 1.3.6.1.4.1.868.2.5.105.1.2.1.1.1 dot1agcfmmepid no-access
The ID of the MEP.
                         tnEthSoamPeerCfgUnicastMac 1.3.6.1.4.1.868.2.5.105.1.2.1.1.2 macaddress read-write
This MAC will be used when unicast is selected with this peer MEP. Also this MAC is used to create HW checking of receiving CCM PDU (LOC detection) from this MEP.
                         tnEthSoamPeerCfgRowState 1.3.6.1.4.1.868.2.5.105.1.2.1.1.3 rowstatus read-only
row status.
             tnEthSoamPeerStatusMgmt 1.3.6.1.4.1.868.2.5.105.1.3
                 tnEthSoamPeerStatusTable 1.3.6.1.4.1.868.2.5.105.1.3.1 no-access
This table provides configuration about the SOAM that provide OAM services.
                     tnEthSoamPeerStatusEntry 1.3.6.1.4.1.868.2.5.105.1.3.1.1 no-access
This entry represents configuration about the SOAM that provide OAM services.
                         tnEthSoamPeerStatusMepId 1.3.6.1.4.1.868.2.5.105.1.3.1.1.1 dot1agcfmmepid no-access
MEPID.
                         tnEthSoamPeerStatuscLOC 1.3.6.1.4.1.868.2.5.105.1.3.1.1.2 truthvalue read-only
Fault Cause indicating that no CCM has been received (in 3,5 periods) - from this peer MEP.
                         tnEthSoamPeerStatuscRDI 1.3.6.1.4.1.868.2.5.105.1.3.1.1.3 truthvalue read-only
Fault Cause indicating that a CCM is received with Remote Defect Indication - from this peer MEP.
                         tnEthSoamPeerStatuscPeriod 1.3.6.1.4.1.868.2.5.105.1.3.1.1.4 truthvalue read-only
Fault Cause indicating that a CCM is received with a period different what is configured for this MEP - from this peer MEP.
                         tnEthSoamPeerStatuscPriority 1.3.6.1.4.1.868.2.5.105.1.3.1.1.5 truthvalue read-only
Fault Cause indicating that a CCM is received with a priority different what is configured for this MEP - from this peer MEP.
             tnEthSoamAPSCfgMgmt 1.3.6.1.4.1.868.2.5.105.1.4
                 tnEthSoamAPSCfgTable 1.3.6.1.4.1.868.2.5.105.1.4.1 no-access
This table provides configuration about the APSCfg that provide OAM services.
                     tnEthSoamAPSCfgEntry 1.3.6.1.4.1.868.2.5.105.1.4.1.1 no-access
This entry represents configuration about the SOAM that provide OAM services.
                         tnEthSoamAPSCfgEnable 1.3.6.1.4.1.868.2.5.105.1.4.1.1.1 truthvalue read-only
Automatic Protection Switching protocol information transportation based on transmitting/receiving R-APS/L-APS PDU can be enabled/disabled. Must be enabled to support ERPS/ELPS implementing APS. This is only valid with one Peer MEP configured.
                         tnEthSoamAPSCfgPriority 1.3.6.1.4.1.868.2.5.105.1.4.1.1.2 ieee8021priorityvalue read-only
The priority to be inserted as PCP bits in TAG (if any).
                         tnEthSoamAPSCfgCast 1.3.6.1.4.1.868.2.5.105.1.4.1.1.3 integer read-only
Selection of APS PDU transmitted unicast or multi-cast. The unicast MAC will be taken from the 'Unicast Peer MAC' configuration. Unicast is only valid for L-APS - see 'Type'. The R-APS PDU is always transmitted with multi-cast MAC described in G.8032. Enumeration: 'unicast': 0, 'multicast': 1.
                         tnEthSoamAPSCfgType 1.3.6.1.4.1.868.2.5.105.1.4.1.1.4 integer read-only
R-APS: APS PDU is transmitted as R-APS - this is for ERPS. L-APS: APS PDU is transmitted as L-APS - this is for ELPS. Enumeration: 'raps': 0, 'laps': 1.
                         tnEthSoamAPSCfgLastOctet 1.3.6.1.4.1.868.2.5.105.1.4.1.1.5 unsigned32 read-only
This is the last octet of the transmitted and expected RAPS multi-cast MAC. In G.8031 (03/2010) a RAPS multi-cast MAC is defined as 01-19-A7-00-00-XX. In current standard the value for this last octet is '01' and the usage of other values is for further study.
             tnEthSoamClientCfgMgmt 1.3.6.1.4.1.868.2.5.105.1.5
                 tnEthSoamClientCfgTable 1.3.6.1.4.1.868.2.5.105.1.5.1 no-access
This table provides configuration about the Link Trace reply that provide OAM services.
                     tnEthSoamClientCfgEntry 1.3.6.1.4.1.868.2.5.105.1.5.1.1 no-access
This entry represents configuration about the Client Configuration that provide OAM services.
                         tnEthSoamClientCfgDomain 1.3.6.1.4.1.868.2.5.105.1.5.1.1.1 tnethsoamtype read-only
The domain of the client layer. Must be EVC.
                         tnEthSoamClientCfgLevel 1.3.6.1.4.1.868.2.5.105.1.5.1.1.2 dot1agcfmmdlevel read-write
Client layer level - meaning that PDU transmitted in client layer flows will be on this level.
                         tnEthSoamClientCfgFlow1 1.3.6.1.4.1.868.2.5.105.1.5.1.1.3 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow2 1.3.6.1.4.1.868.2.5.105.1.5.1.1.4 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow3 1.3.6.1.4.1.868.2.5.105.1.5.1.1.5 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow4 1.3.6.1.4.1.868.2.5.105.1.5.1.1.6 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow5 1.3.6.1.4.1.868.2.5.105.1.5.1.1.7 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow6 1.3.6.1.4.1.868.2.5.105.1.5.1.1.8 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow7 1.3.6.1.4.1.868.2.5.105.1.5.1.1.9 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow8 1.3.6.1.4.1.868.2.5.105.1.5.1.1.10 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow9 1.3.6.1.4.1.868.2.5.105.1.5.1.1.11 unsigned32 read-only
Client layer flow instance numbers.
                         tnEthSoamClientCfgFlow10 1.3.6.1.4.1.868.2.5.105.1.5.1.1.12 unsigned32 read-only
Client layer flow instance numbers.
             tnEthSoamLocalCfgMgmt 1.3.6.1.4.1.868.2.5.105.1.6
                 tnEthSoamLocalCfgTable 1.3.6.1.4.1.868.2.5.105.1.6.1 no-access
This table has entries which generate a configuration for local SOAM.
                     tnEthSoamLocalCfgEntry 1.3.6.1.4.1.868.2.5.105.1.6.1.1 no-access
A entry in the table represents a configuration for local SOAM.
                         tnEthSoamFormat 1.3.6.1.4.1.868.2.5.105.1.6.1.1.1 integer read-write
This is the configuration of the two possible Maintenance Association Identifier formats. ITU ICC: This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7 char. IEEE String: This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG id' can be max. 8 char. Enumeration: 'it': 1, 'ieee': 2.
                         tnEthSoamDomainName 1.3.6.1.4.1.868.2.5.105.1.6.1.1.2 octet string read-write
This is either ITU ICC (MEG ID value[1-6]) or IEEE Maintenance Domain Name - depending on 'Format'. See 'Format'.
                         tnEthSoamMegOrMaName 1.3.6.1.4.1.868.2.5.105.1.6.1.1.3 octet string read-write
This is either ITU UMC (MEG ID value[7-13]) or IEEE Short MA Name - depending on 'Format'. See 'Format'. In case of ITU ICC format this can be max. 7 char. If only 6 char. is entered the MEG ID value[13] will become NULL.
                         tnEthSoamMepID 1.3.6.1.4.1.868.2.5.105.1.6.1.1.4 dot1agcfmmepid read-write
This value will become the transmitted two byte CCM MEP ID.
                         tnEthSoamCcmInterval 1.3.6.1.4.1.868.2.5.105.1.6.1.1.5 integer read-write
Interval between CCM transmissions to be used by all MEPs in the MA. Enumeration: 'interval300s': 1, 'interval1M': 6, 'interval10s': 3, 'interval1s': 4, 'interval100s': 2, 'interval6M': 5, 'interval6H': 7.
                         tnEthSoamEVCQos 1.3.6.1.4.1.868.2.5.105.1.6.1.1.6 integer read-write
This is only relevant for a EVC MEP. This is the Qos of the EVC used for getting QoS counters for Loss Measurement.
                         tnEthSoamEVCPolicyID 1.3.6.1.4.1.868.2.5.105.1.6.1.1.7 integer read-write
This is relevant for an EVC Egress/Up-MEP. This is the Policy number of the relevant ECE. The Policy ID that the generated TST frames will get as IS1 action. Can be the same as any ECE Policy Number, enabling it to hit the same ACL and thereby the same EVC policer.
                         tnEthSoamVOE 1.3.6.1.4.1.868.2.5.105.1.6.1.1.8 truthvalue read-write
This will attempt to utilize VOE HW for MEP implementation. Not all platforms support VOE.
             tnEthSoamStatusMgmt 1.3.6.1.4.1.868.2.5.105.1.7
                 tnEthSoamStatusTable 1.3.6.1.4.1.868.2.5.105.1.7.1 no-access
This table provides configuration about the SOAM that provide OAM services.
                     tnEthSoamStatusEntry 1.3.6.1.4.1.868.2.5.105.1.7.1.1 no-access
This entry represents configuration about the SOAM that provide OAM services.
                         tnEthSoamStatusCCMLevel 1.3.6.1.4.1.868.2.5.105.1.7.1.1.1 truthvalue read-only
Fault Cause indicating that a CCM is received with a lower level than the configured for this MEP.
                         tnEthSoamStatusCCMMeg 1.3.6.1.4.1.868.2.5.105.1.7.1.1.2 truthvalue read-only
Fault Cause indicating that a CCM is received with a MEG ID different from configured for this MEP.
                         tnEthSoamStatusCCMMep 1.3.6.1.4.1.868.2.5.105.1.7.1.1.3 truthvalue read-only
Fault Cause indicating that a CCM is received with a MEP ID different from all 'Peer MEP ID' configured for this MEP.
                         tnEthSoamStatusAIS 1.3.6.1.4.1.868.2.5.105.1.7.1.1.4 truthvalue read-only
Fault Cause indicating that AIS PDU is received.
                         tnEthSoamStatusCLK 1.3.6.1.4.1.868.2.5.105.1.7.1.1.5 truthvalue read-only
Fault Cause indicating that LCK PDU is received.
                         tnEthSoamStatusSSF 1.3.6.1.4.1.868.2.5.105.1.7.1.1.6 truthvalue read-only
Fault Cause indicating that server layer is indicating Signal Fail.
                         tnEthSoamStatusBLK 1.3.6.1.4.1.868.2.5.105.1.7.1.1.7 truthvalue read-only
The consequent action of blocking service frames in this flow is active.
                         tnEthSoamStatusTSF 1.3.6.1.4.1.868.2.5.105.1.7.1.1.8 truthvalue read-only
The consequent action of indicating Trail Signal Fail to-wards protection is active.
             tnEthSoamLossStateMgmt 1.3.6.1.4.1.868.2.5.105.1.8
                 tnEthSoamLossStateTable 1.3.6.1.4.1.868.2.5.105.1.8.1 no-access
This table has entries which generate a configuration for loss measurement State.
                     tnEthSoamLossStateEntry 1.3.6.1.4.1.868.2.5.105.1.8.1.1 no-access
A entry in the table represents a configuration for loss measurement State.
                         tnEthSoamLossStateTxCount 1.3.6.1.4.1.868.2.5.105.1.8.1.1.1 gauge32 read-only
The accumulated Tx frame loss count.
                         tnEthSoamLossStateRxCount 1.3.6.1.4.1.868.2.5.105.1.8.1.1.2 gauge32 read-only
The accumulated Rx frame loss count.
                         tnEthSoamLossStateNELossCount 1.3.6.1.4.1.868.2.5.105.1.8.1.1.3 gauge32 read-only
The accumulated near end frame loss count - since last 'clear'.
                         tnEthSoamLossStateFELossCount 1.3.6.1.4.1.868.2.5.105.1.8.1.1.4 gauge32 read-only
The accumulated far end frame loss count - since last 'clear'.
                         tnEthSoamLossStateNELossRatio 1.3.6.1.4.1.868.2.5.105.1.8.1.1.5 gauge32 read-only
The near end frame loss ratio calculated based on the near end frame loss count and far end frame transmitted - in the latest 'FLR Interval'. The result is given in percent.
                         tnEthSoamLossStateFELossRatio 1.3.6.1.4.1.868.2.5.105.1.8.1.1.6 gauge32 read-only
The far end frame loss ratio calculated based on the far end frame loss count and near end frame transmitted - in the latest 'FLR Interval'. The result is given in percent.
                         tnEthSoamLossStateAction 1.3.6.1.4.1.868.2.5.105.1.8.1.1.7 truthvalue read-write
Set of this check and save will clear the accumulated counters and restart ratio calculation.
             tnEthSoamTSExtMgmt 1.3.6.1.4.1.868.2.5.105.1.9
                 tnEthSoamTSExtTable 1.3.6.1.4.1.868.2.5.105.1.9.1 no-access
This table has entries which generate a configuration for test signal.
                     tnEthSoamTSExtEntry 1.3.6.1.4.1.868.2.5.105.1.9.1.1 no-access
A entry in the table represents a configuration for test signal.
                         tnEthSoamTSSeqNum 1.3.6.1.4.1.868.2.5.105.1.9.1.1.1 truthvalue read-write
sequence number.
                         tnEthSoamTSStateRxRate 1.3.6.1.4.1.868.2.5.105.1.9.1.1.2 integer read-only
The current received TST frame bit rate in 100 Kbps. This is calculated on a 1 s. basis, starting when first TST frame is received after 'Clear'. The frame size used for this calculation is the first received after 'Clear' .
                         tnEthSoamTSStateAction 1.3.6.1.4.1.868.2.5.105.1.9.1.1.3 truthvalue read-write
This will clear all Test Signal State. Transmission of TST frame will be restarted. Calculation of 'Rx frame count', 'RX rate' and 'Test time' will be started when receiving first TST frame.
                         tnEthSoamTestCfgPattern 1.3.6.1.4.1.868.2.5.105.1.9.1.1.4 tnethsoamtestpatterntype read-only
This attribute specifies the type of test pattern to be sent or received in an OAM PDU Test TLV.
             tnEthSoamLtmMgmt 1.3.6.1.4.1.868.2.5.105.1.10
                   tnEthSoamLtmTable 1.3.6.1.4.1.868.2.5.105.1.10.1 no-access
This table provides configuration about ltm priority that provide OAM services.
                       tnEthSoamLtmEntry 1.3.6.1.4.1.868.2.5.105.1.10.1.1 no-access
This entry represents configuration about the SOAM that provide OAM services.
                           tnEthSoamltmPriority 1.3.6.1.4.1.868.2.5.105.1.10.1.1.1 ieee8021priorityvalue read-only
The priority to be inserted as PCP bits in TAG (if any).
             tnEthSoamLtrMgmt 1.3.6.1.4.1.868.2.5.105.1.11
                   tnEthSoamLtrTable 1.3.6.1.4.1.868.2.5.105.1.11.1 no-access
This table provides configuration about ltm priority that provide OAM services.
                       tnEthSoamLtrEntry 1.3.6.1.4.1.868.2.5.105.1.11.1.1 no-access
This entry represents configuration about the SOAM that provide OAM services.
                           tnEthSoamLtrDirection 1.3.6.1.4.1.868.2.5.105.1.11.1.1.1 integer read-only
The priority to be inserted as PCP bits in TAG (if any). Enumeration: 'down': 0, 'up': 1.
             tnEthSoamAisCfgMgmt 1.3.6.1.4.1.868.2.5.105.1.12
                   tnEthSoamAisCfgTable 1.3.6.1.4.1.868.2.5.105.1.12.1 no-access
This table provides configuration about ais that provide OAM services.
                       tnEthSoamAisCfgEntry 1.3.6.1.4.1.868.2.5.105.1.12.1.1 no-access
This entry represents configuration about the SOAM that provide OAM services.
                           tnEthSoamAisCfgProtection 1.3.6.1.4.1.868.2.5.105.1.12.1.1.1 truthvalue read-write
Selecting this means that the first 3 AIS PDU is transmitted as fast as possible - in case of using this for protection in the end point.
             tnEthSoamDmCfgMgmt 1.3.6.1.4.1.868.2.5.105.1.13
                   tnEthSoamDmCfgTable 1.3.6.1.4.1.868.2.5.105.1.13.1 no-access
This table provides configuration about the Delay Measurement that provide OAM services.
                       tnEthSoamDmCfgEntry 1.3.6.1.4.1.868.2.5.105.1.13.1.1 no-access
This entry represents configuration about the Delay Measurement that provide OAM services.
                           tnEthSoamDmCfgEnable 1.3.6.1.4.1.868.2.5.105.1.13.1.1.1 truthvalue read-only
Delay Measurement based on transmitting 1DM/DMM PDU can be enabled/disabled. Delay Measurement based on receiving and handling 1DM/DMR PDU is always enabled.
                           tnEthSoamDmCfgPriority 1.3.6.1.4.1.868.2.5.105.1.13.1.1.2 ieee8021priorityvalue read-only
The priority to be inserted as PCP bits in TAG (if any).
                           tnEthSoamDmCfgCast 1.3.6.1.4.1.868.2.5.105.1.13.1.1.3 integer read-only
Selection of 1DM/DMM PDU transmitted unicast or multicast. The unicast MAC will be configured through 'Peer MEP'. Enumeration: 'unicast': 0, 'multicast': 1.
                           tnEthSoamDmCfgPeerId 1.3.6.1.4.1.868.2.5.105.1.13.1.1.4 dot1agcfmmepid read-only
Peer MEP ID.
                           tnEthSoamDmCfgWayType 1.3.6.1.4.1.868.2.5.105.1.13.1.1.5 integer read-only
One-Way: One-Way Delay Measurement implemented on 1DM. Two-Way: Two-Way Delay Measurement implemented on DMM/DMR. Enumeration: 'twoway': 2, 'oneway': 1.
                           tnEthSoamDmCfgTxMode 1.3.6.1.4.1.868.2.5.105.1.13.1.1.6 integer read-only
Standardize: Y.1731 standardize way to transmit 1DM/DMR. Proprietary: Vitesse proprietary way with follow-up packets to transmit 1DM/DMR. Enumeration: 'standardize': 1, 'proprietary': 2.
                           tnEthSoamDmCfgCalc 1.3.6.1.4.1.868.2.5.105.1.13.1.1.7 integer read-only
This is only used if the 'Way' is configured to Two-way. Round trip: The frame dealy calculated by the transmitting and receiving timestamps of initiators. Frame Delay = RxTimeb-TxTimeStampf Flow: The frame dealy calculated by the transmitting and receiving timestamps of initiators and remotes. Frame Delay = (RxTimeb-TxTimeStampf)-(TxTimeStampb-RxTimeStampf). Enumeration: 'roundtrip': 1, 'flow': 2.
                           tnEthSoamDmCfgGap 1.3.6.1.4.1.868.2.5.105.1.13.1.1.8 unsigned32 read-only
The gap between transmitting 1DM/DMM PDU in 10ms. The range is 10 to 65535.
                           tnEthSoamDmCfgCount 1.3.6.1.4.1.868.2.5.105.1.13.1.1.9 integer read-only
The number of last records to calculate. The range is 10 to 2000.
                           tnEthSoamDmCfgUnit 1.3.6.1.4.1.868.2.5.105.1.13.1.1.10 integer read-only
The time resolution. Enumeration: 'ns': 1, 'us': 2.
                           tnEthSoamDmCfgD2forD1 1.3.6.1.4.1.868.2.5.105.1.13.1.1.11 truthvalue read-only
Enable to use DMM/DMR packet to calculate one-way DM. If the option is enabled, the following action will be taken. When DMR is received, two-way delay (roundtrip or flow) and both near-end-to-far-end and far-end-to-near-end one-way delay are calcualted. When DMM or 1DM is received, only far-end-to-near-end one-way delay is calculated.
                           tnEthSoamDmCfgCOAction 1.3.6.1.4.1.868.2.5.105.1.13.1.1.12 integer read-only
The action to counter when overflow happens. Enumeration: 'reset': 2, 'keep': 1.
             tnEthSoamDmStateMgmt 1.3.6.1.4.1.868.2.5.105.1.14
                   tnEthSoamDmStateTable 1.3.6.1.4.1.868.2.5.105.1.14.1 no-access
This table has entries which generate a configuration for delay measurement state.
                       tnEthSoamDmStateEntry 1.3.6.1.4.1.868.2.5.105.1.14.1.1 no-access
A entry in the table which generate a configuration for delay measurement state.
                           tnEthSoamDmStateFNTxCount 1.3.6.1.4.1.868.2.5.105.1.14.1.1.1 gauge32 read-only
The accumulated transmit count - since last 'clear'.
                           tnEthSoamDmStateFNRxTimeout 1.3.6.1.4.1.868.2.5.105.1.14.1.1.2 gauge32 read-only
The accumulated receive timeout count for two-way only - since last 'clear'.
                           tnEthSoamDmStateFNRxCount 1.3.6.1.4.1.868.2.5.105.1.14.1.1.3 gauge32 read-only
The accumulated receive count - since last 'clear'.
                           tnEthSoamDmStateFNRxError 1.3.6.1.4.1.868.2.5.105.1.14.1.1.4 gauge32 read-only
The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout).
                           tnEthSoamDmStateFNAvgTotal 1.3.6.1.4.1.868.2.5.105.1.14.1.1.5 gauge32 read-only
The average delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateFNAvgLastN 1.3.6.1.4.1.868.2.5.105.1.14.1.1.6 gauge32 read-only
The average delay of the last n packets - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateFNAvgVarTotal 1.3.6.1.4.1.868.2.5.105.1.14.1.1.7 gauge32 read-only
The average delay variation - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateFNAvgVarLastN 1.3.6.1.4.1.868.2.5.105.1.14.1.1.8 gauge32 read-only
The average delay variation of the last n packets - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateFNMinValue 1.3.6.1.4.1.868.2.5.105.1.14.1.1.9 gauge32 read-only
The minimum delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateFNMaxValue 1.3.6.1.4.1.868.2.5.105.1.14.1.1.10 gauge32 read-only
The maximum delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateFNOverFlow 1.3.6.1.4.1.868.2.5.105.1.14.1.1.11 gauge32 read-only
The number of counter overflow - since last 'clear'.
                           tnEthSoamDmStateNFTxCount 1.3.6.1.4.1.868.2.5.105.1.14.1.1.12 gauge32 read-only
The accumulated transmit count - since last 'clear'.
                           tnEthSoamDmStateNFRxTimeout 1.3.6.1.4.1.868.2.5.105.1.14.1.1.13 gauge32 read-only
The accumulated receive timeout count for two-way only - since last 'clear'.
                           tnEthSoamDmStateNFRxCount 1.3.6.1.4.1.868.2.5.105.1.14.1.1.14 gauge32 read-only
The accumulated receive count - since last 'clear'.
                           tnEthSoamDmStateNFRxError 1.3.6.1.4.1.868.2.5.105.1.14.1.1.15 gauge32 read-only
The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout).
                           tnEthSoamDmStateNFAvgTotal 1.3.6.1.4.1.868.2.5.105.1.14.1.1.16 gauge32 read-only
The average delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateNFAvgLastN 1.3.6.1.4.1.868.2.5.105.1.14.1.1.17 gauge32 read-only
The average delay of the last n packets - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateNFAvgVarTotal 1.3.6.1.4.1.868.2.5.105.1.14.1.1.18 gauge32 read-only
The average delay variation - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateNFAvgVarLastN 1.3.6.1.4.1.868.2.5.105.1.14.1.1.19 gauge32 read-only
The average delay variation of the last n packets - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateNFMinValue 1.3.6.1.4.1.868.2.5.105.1.14.1.1.20 gauge32 read-only
The minimum delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateNFMaxValue 1.3.6.1.4.1.868.2.5.105.1.14.1.1.21 gauge32 read-only
The maximum delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateNFOverFlow 1.3.6.1.4.1.868.2.5.105.1.14.1.1.22 gauge32 read-only
The number of counter overflow - since last 'clear'.
                           tnEthSoamDmStateTwoWayTxCount 1.3.6.1.4.1.868.2.5.105.1.14.1.1.23 gauge32 read-only
The accumulated transmit count - since last 'clear'.
                           tnEthSoamDmStateTwoWayRxTimeout 1.3.6.1.4.1.868.2.5.105.1.14.1.1.24 gauge32 read-only
The accumulated receive timeout count for two-way only - since last 'clear'.
                           tnEthSoamDmStateTwoWayRxCount 1.3.6.1.4.1.868.2.5.105.1.14.1.1.25 gauge32 read-only
The accumulated receive count - since last 'clear'.
                           tnEthSoamDmStateTwoWayRxError 1.3.6.1.4.1.868.2.5.105.1.14.1.1.26 gauge32 read-only
The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout).
                           tnEthSoamDmStateTwoWayAvgTotal 1.3.6.1.4.1.868.2.5.105.1.14.1.1.27 gauge32 read-only
The average delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateTwoWayAvgLastN 1.3.6.1.4.1.868.2.5.105.1.14.1.1.28 gauge32 read-only
The average delay of the last n packets - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateTwoWayAvgVarTotal 1.3.6.1.4.1.868.2.5.105.1.14.1.1.29 gauge32 read-only
The average delay variation - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateTwoWayAvgVarLastN 1.3.6.1.4.1.868.2.5.105.1.14.1.1.30 gauge32 read-only
The average delay variation of the last n packets - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateTwoWayMinValue 1.3.6.1.4.1.868.2.5.105.1.14.1.1.31 gauge32 read-only
The minimum delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateTwoWayMaxValue 1.3.6.1.4.1.868.2.5.105.1.14.1.1.32 gauge32 read-only
The maximum delay - since last 'clear'. The unit is microsecond.
                           tnEthSoamDmStateTwoWayOverFlow 1.3.6.1.4.1.868.2.5.105.1.14.1.1.33 gauge32 read-only
The number of counter overflow - since last 'clear'.
                           tnEthSoamDmStateAction 1.3.6.1.4.1.868.2.5.105.1.14.1.1.34 truthvalue read-write
The number of counter overflow - since last 'clear'.
         tnEthSoamMIBConformance 1.3.6.1.4.1.868.2.5.105.2