TN-ELPS-MIB: View SNMP OID List / Download MIB

VENDOR: TRANSITION ENGINEERING INC.


 Home MIB: TN-ELPS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, TN-PROTECTION-MIB, TRANSITION-SMI, SNMPv2-TC, IEEE8021-CFM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tnElpsMib 1.3.6.1.4.1.868.2.5.109.2
     tnElpsMibNotifications 1.3.6.1.4.1.868.2.5.109.2.0
         tnElpsAlarmUp 1.3.6.1.4.1.868.2.5.109.2.0.1
A Elps has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the Elps that has detected the fault. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the ELPS reporting the defect by the indices in the OID of the variables in the notification: tnElpsInstance - Also the index of the EPLS state table entry (tnElpsStateTable).
         tnElpsAlarmDown 1.3.6.1.4.1.868.2.5.109.2.0.2
A Elps has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the Elps that has detected the fault. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the ELPS reporting the defect by the indices in the OID of the variables in the notification: tnElpsInstance - Also the index of the EPLS state table entry (tnElpsStateTable).
     tnElpsMibObjects 1.3.6.1.4.1.868.2.5.109.2.1
         tnElpsCfgMgmt 1.3.6.1.4.1.868.2.5.109.2.1.1
             tnElpsCfgTable 1.3.6.1.4.1.868.2.5.109.2.1.1.1 no-access
This table provides configuration of ELPS.
                 tnElpsCfgEntry 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1 no-access
A entry in the table represents a configuration for ELPS.
                     tnElpsInstance 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.1 unsigned32 no-access
The ID of the ELPS.
                     tnElpsDomain 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.2 integer read-only
Port: This will create a ELPS in the Port Domain. 'W/P Flow' is a Port. Enumeration: 'port': 1.
                     tnElpsArchitecture 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.3 integer read-only
Port: This will create a 1+1 ELPS. Port: This will create a 1:1 ELPS. Enumeration: 'onePlusOne': 1, 'oneForOne': 2.
                     tnElpsWFlowPortId 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.4 interfaceindex read-only
The working flow for the ELPS - See 'Domain' above.
                     tnElpsPFlowPortId 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.5 interfaceindex read-only
The protecting flow for the ELPS - See 'Domain' above.
                     tnElpsWSfMepId 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.6 dot1agcfmmepid read-only
The working Signal Fail reporting MEP.
                     tnElpsPSfMepId 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.7 dot1agcfmmepid read-only
The protecting Signal Fail reporting MEP.
                     tnElpsApsMepId 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.8 dot1agcfmmepid read-only
The APS PDU handling MEP.
                     tnElpsConfigured 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.9 truthvalue read-only
False: This ELPS is only created and has not yet been configured - is not active. True: This ELPS is configured - is active.
                     tnElpsDirection 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.10 integer read-only
Unidirectional: ELPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1. Bidirectional: ELPS in the two ends is selecting traffic from the same working/protecting flow. This requires APS enabled. This is mandatory for 1:1. Enumeration: 'bidirectional': 2, 'unidirectional': 1.
                     tnElpsApsEnable 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.11 truthvalue read-only
The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1.
                     tnElpsRevertiveEnable 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.12 truthvalue read-only
The revertive switching to working flow can be enabled/disabled.
                     tnElpsWTRTime 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.13 integer read-only
The Wait To Restore timing value to be used in revertive switching. Enumeration: 'disabled': 0, 't6min': 4, 't11min': 9, 't9min': 7, 't5min': 3, 't7min': 5, 't10sec': 1, 't8min': 6, 't10min': 8, 't30sec': 2, 't12min': 10.
                     tnElpsHoldOffTime 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.14 integer read-only
The timing value to be used to make persistent check on Signal Fail before switching. Enumeration: 'disabled': 0, 't100ms': 1, 't300ms': 3, 't4s': 13, 't600ms': 6, 't400ms': 4, 't900ms': 9, 't6s': 15, 't500ms': 5, 't200ms': 2, 't7s': 16, 't10s': 19, 't800ms': 8, 't1s': 10, 't5s': 14, 't700ms': 7, 't2s': 11, 't8s': 17, 't3s': 12, 't9s': 18.
                     tnElpsCmd 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.15 integer read-only
None: There is no active local command on this instance. Clear: The active local command will be cleared. Lock Out: This ELPS is locked to working (not active). In case of 1:N (more than one ELPS with same protecting flow) - when one ELPS switch to protecting flow, other ELPS is enforced this command Forced Switch: Forced switch to protecting. Manual Switch P: Manual switch to protecting. Manual Switch W: Manual switch to working - this is only possible in 1:1 non-revertive. Exercise: Exercise of the protocol - not traffic effecting. Freeze: This ELPS is locally freezed - ignoring all input. Lock Out Local: This ELPS is locally 'locked out' - ignoring local SF detected on working. Enumeration: 'none': 0, 'lockOutLocal': 8, 'clear': 1, 'manualSwitchP': 4, 'manualSwitchW': 5, 'freeze': 7, 'lockOut': 2, 'forcedSwitch': 3, 'exercise': 6.
                     tnElpsStatus 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.16 rowstatus read-only
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
         tnElpsStateMgmt 1.3.6.1.4.1.868.2.5.109.2.1.2
             tnElpsStateTable 1.3.6.1.4.1.868.2.5.109.2.1.2.1 no-access
This table provides configuration about ELPS state
                 tnElpsStateEntry 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1 no-access
This entry represents configuration about ELPS state
                     tnElpsProtectionState 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.1 tnelpsprotswitchstate read-only
ELPS Protection state
                     tnElpsWFlowState 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.2 tnelpsdefectstate read-only
signalOk: State of working flow is ok signalFail: State of working flow is Signal Fail signalDegrade: State of working flow is Signal Degrade (for future use)
                     tnElpsPFlowState 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.3 tnelpsdefectstate read-only
signalOk: State of protecting flow is ok signalFail: State of protecting flow is Signal Fail signalDegrade: State of protecting flow is Signal Degrade (for future use)
                     tnElpsTransmitRequestType 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.4 tnelpsrequesttype read-only
The transmitted request type.
                     tnElpsTransmitRequestedSignal 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.5 unsigned32 read-only
The transmitted request signal.
                     tnElpsTransmitBridgedSignal 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.6 unsigned32 read-only
The transmitted bridged signal.
                     tnElpsReceiveRequestType 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.7 tnelpsrequesttype read-only
The requested type that is received from APS.
                     tnElpsReceiveRequestedSignal 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.8 unsigned32 read-only
The requested signal received from APS.
                     tnElpsReceiveBridgedSignal 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.9 unsigned32 read-only
The bridged signal received from APS .
                     tnElpsArchitectureMismatch 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.10 truthvalue read-only
The architecture indicated in the received APS does not match the locally configured.
                     tnElpsAPSOnWorking 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.11 truthvalue read-only
APS is received on the working flow.
                     tnElpsSwitchingIncomplete 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.12 truthvalue read-only
Traffic is not selected from the same flow instance in the two ends.
                     tnElpsNoApsReceived 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.13 truthvalue read-only
APS PDU is not received from the other end.
         tnElpsLinkOverMgmt 1.3.6.1.4.1.868.2.5.109.2.1.3
             tnElpsLinkOverTable 1.3.6.1.4.1.868.2.5.109.2.1.3.1 no-access
This table provides configuration about ELPS Link Over based on the SOAM DM
                 tnElpsLinkOverEntry 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1 no-access
This entry represents configuration about ELPS Link Over
                     tnElpsLinkOverEnabled 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1.1 truthvalue read-write
The feature about the DM LinkOver can be enabled and disabeld. False: This feature is disabled. True: This ELPS is enabled.
                     tnElpsLinkOverDeltaValue 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1.2 unsigned32 read-write
The Delta value is ranged from 6 to 120. If the value that is on one link subtract the other one is larger than the delta value, the data flow will be swithed to the link that own the better DM value.
     tnElpsMibConformance 1.3.6.1.4.1.868.2.5.109.2.2