TN-ACL-MIB: View SNMP OID List / Download MIB

VENDOR: TRANSITION ENGINEERING INC.


 Home MIB: TN-ACL-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, Q-BRIDGE-MIB, TN-MGMT-MIB, ENTITY-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tnAclMgmt 1.3.6.1.4.1.868.2.5.3.1.1.5
The mib provides functionalities for ACL managing in TN modules.
     tnAclPortTable 1.3.6.1.4.1.868.2.5.3.1.1.5.1 no-access
This table displays and sets the ACL parameters (ACE) of each switch port.
         tnAclPortEntry 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1 no-access
This entry represents an ACL port configuration.
             tnAclPortPolicyId 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.1 integer read-write
Select the policy to apply to this port. The allowed values are 0 through 255. The default value is 0.
             tnAclPortAction 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.2 integer read-write
Select the policy to apply to this port. The allowed values are 0 through 255. The default value is 0. Enumeration: 'deny': 1, 'permit': 2.
             tnAclPortRateLimiterId 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.3 ratelimitervalue read-write
Select which rate limiter to apply on this port. The allowed values are Disabled or the values 1 through 16. The default value is 'Disabled'.
             tnAclPortEvcPolicerState 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.4 integer read-write
Select whether EVC policer is enabled or disabled. The default value is 'Disabled'. Enumeration: 'enable': 1, 'disable': 2.
             tnAclPortEvcPolicerId 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.5 integer read-write
Select which EVC policer ID to apply on this port. when 'tnAclPortEvcPolicerState' is enabled, the valid value is from 1 to 128.
             tnAclPortRedirect 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.6 portlist read-write
Select which port frames are redirected on. The allowed values is a specific port number and it can't be set when action is permitted. When no bit is selected, port redirect is 'disabled'.
             tnAclPortMirrorState 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.7 integer read-write
Specify the mirror operation of this port. The allowed values are: Enabled: Frames received on the port are mirrored. Disabled: Frames received on the port are not mirrored. The default value is 'Disabled'. Enumeration: 'enable': 1, 'disable': 2.
             tnAclPortLoggingState 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.8 integer read-write
Specify the logging operation of this port. The allowed values are: Enabled: Frames received on the port are stored in the System Log. Disabled: Frames received on the port are not logged. The default value is 'Disabled'. Enumeration: 'enable': 1, 'disable': 2.
             tnAclPortShutdownState 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.9 integer read-write
Specify the port shut down operation of this port. The allowed values are: Enabled: If a frame is received on the port, the port will be disabled. Disabled: Port shut down is disabled. The default value is 'Disabled'. Enumeration: 'enable': 1, 'disable': 2.
             tnAclPortAclState 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.10 integer read-write
Specify the port state of this port. The allowed values are: Enabled: To reopen ports by changing the volatile port configuration of the ACL user module. Disabled: To close ports by changing the volatile port configuration of the ACL user module. The default value is 'Enabled'. Enumeration: 'enable': 1, 'disable': 2.
             tnAclPortCounter 1.3.6.1.4.1.868.2.5.3.1.1.5.1.1.11 counter32 read-only
Counts the number of frames that match this ACE.
     tnAclRateLimiterTable 1.3.6.1.4.1.868.2.5.3.1.1.5.2 no-access
This table displays and sets the rate limiter for the ACL of the switch.
         tnAclRateLimiterEntry 1.3.6.1.4.1.868.2.5.3.1.1.5.2.1 no-access
This entry represents an ACL rate limiter.
             tnAclRateLimitId 1.3.6.1.4.1.868.2.5.3.1.1.5.2.1.1 integer no-access
The rate limiter ID for the settings contained in the same row.
             tnAclRateLimitRate 1.3.6.1.4.1.868.2.5.3.1.1.5.2.1.2 integer read-write
The allowed values are: 0-3276700 in pps or 0, 100, 200, 300, ..., 1000000 in kbps.
             tnAclRateLimitUnit 1.3.6.1.4.1.868.2.5.3.1.1.5.2.1.3 integer read-write
Specify the rate unit. The allowed values are: pps: packets per second. kbps: Kbits per second. Enumeration: 'pps': 1, 'kbps': 2.
     tnAclOperTable 1.3.6.1.4.1.868.2.5.3.1.1.5.3 no-access
This table sets the ACL operation.
         tnAclOperEntry 1.3.6.1.4.1.868.2.5.3.1.1.5.3.1 no-access
This entry represents an ACL operation.
             tnAclClearCounter 1.3.6.1.4.1.868.2.5.3.1.1.5.3.1.1 integer read-write
Specify ACL clear operation. The allowed values are: nooper: no operation. clear: Clear all ACL counters, including counts the number of frames that match this ACE and ACL port counters. Enumeration: 'clear': 2, 'nooper': 1.
     tnAceTable 1.3.6.1.4.1.868.2.5.3.1.1.5.4 no-access
This table contains the configuration of ACE(ACL control entry) of the switch.
         tnAceEntry 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1 no-access
This entry represents an ACE. Each entry in this table represents an ACE and can be created or deleted by the management system.
             tnAceIndex 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.1 integer no-access
The index of ACE.
             tnAceNextIndex 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.2 integer read-only
Specify the created ACE is placed before which ACE.
             tnAceIngressPort 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.3 portlist read-only
Select the ingress port for which this ACE applies.
             tnAcePolicyFilterType 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.4 integer read-only
Specify the policy number filter for this ACE. Any: No policy filter is specified. (policy filter status is 'dont-care'.) Specific: If you want to filter a specific policy with this ACE, choose this value. Two field for entering an policy value and bitmask appears. Enumeration: 'specific': 2, 'any': 1.
             tnAcePolicyValue 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.5 integer read-only
When 'Specific' is selected for the policy filter, you can enter a specific policy value. The allowed range is 0 to 255.
             tnAcePolicyBitMask 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.6 integer read-only
When 'Specific' is selected for the policy filter, you can enter a specific policy bitmask. The allowed range is 0x0 to 0xff.
             tnAcePolicyFrameType 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.7 integer read-only
Select the frame type for this ACE. These frame types are mutually exclusive. any: Any frame can match this ACE. etherType: Only Ethernet Type frames can match this ACE. The IEEE 802.3 describes the value of Length/Type Field specifications to be greater than or equal to 1536 decimal (equal to 0600 hexadecimal). arp: Only ARP frames can match this ACE. Notice the ARP frames won't match the ACE with ethernet type. ipv4: Only IPv4 frames can match this ACE. Notice the IPv4 frames won't match the ACE with ethernet type. Enumeration: 'arp': 3, 'etherType': 2, 'any': 1, 'ipv4': 4.
             tnAceAction 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.8 integer read-only
Specify the action to take with a frame that hits this ACE. permit: The frame that hits this ACE is granted permission for the ACE operation. deny: The frame that hits this ACE is dropped. Enumeration: 'deny': 2, 'permit': 1.
             tnAceRateLimiter 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.9 ratelimitervalue read-write
Specify the rate limiter in number of base units. The allowed range is 1 to 16. 'disabled' indicates that the rate limiter operation is disabled.
             tnAceEvcPolicerState 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.10 integer read-only
Select whether EVC policer is enabled or disabled. The default value is 'Disabled'. Enumeration: 'enable': 1, 'disable': 2.
             tnAceEvcPolicerId 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.11 integer read-only
Select which EVC policer ID to apply on this ACE. The allowed values are from 1 through 128.
             tnAcePortRedirect 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.12 portlist read-only
Frames that hit the ACE are redirected to the port number specified here. The allowed range is the same as the switch port number range. 'disabled' indicates that the port redirect operation is disabled and the specific port number of 'Port Redirect' can't be set when action is permitted.
             tnAceMirrorState 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.13 integer read-only
Specify the mirror operation of this port. Frames matching the ACE are mirrored to the destination mirror port. The allowed values are: Enabled: Frames received on the port are mirrored. Disabled: Frames received on the port are not mirrored. The default value is 'Disabled'. Enumeration: 'enable': 1, 'disable': 2.
             tnAceLoggingState 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.14 integer read-only
Specify the logging operation of the ACE. The allowed values are: Enabled: Frames matching the ACE are stored in the System Log. Disabled: Frames matching the ACE are not logged. Enumeration: 'enable': 1, 'disable': 2.
             tnAceShutdownState 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.15 integer read-only
Specify the port shut down operation of the ACE. The allowed values are: Enabled: If a frame matches the ACE, the ingress port will be disabled. Disabled: Port shut down is disabled for the ACE. Enumeration: 'enable': 1, 'disable': 2.
             tnAceCounter 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.16 counter32 read-only
The counter indicates the number of times the ACE was hit by a frame.
             tnAceVlan8021qTagged 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.17 integer read-only
Specify whether frames can hit the action according to the 802.1Q tagged. The allowed values are: any: Any value is allowed ('dont-care'). enabled: Tagged frame only. disabled: Untagged frame only. The default value is 'Any'. Enumeration: 'disabled': 3, 'enabled': 2, 'any': 1.
             tnAceVlanIdFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.18 integer read-only
Specify the VLAN ID filter for this ACE. any: No VLAN ID filter is specified. (VLAN ID filter status is 'dont-care'.) specific: If you want to filter a specific VLAN ID with this ACE, choose this value. A field for entering a VLAN ID number appears. Enumeration: 'specific': 2, 'any': 1.
             tnAceVlanId 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.19 integer read-only
When 'Specific' is selected for the VLAN ID filter, you can enter a specific VLAN ID number. The allowed range is 1 to 4095. A frame that hits this ACE matches this VLAN ID value.
             tnAceTagPriority 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.20 integer read-only
Specify the tag priority for this ACE. A frame that hits this ACE matches this tag priority. The allowed number range is 0 to 7. The value Any means that no tag priority is specified (tag priority is 'dont-care'). Enumeration: 'tp7': 8, 'tp6': 7, 'tp5': 6, 'tp4': 5, 'tp3': 4, 'tp2': 3, 'tp1': 2, 'tp0': 1, 'any': 9.
             tnAceRowStatus 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.21 rowstatus read-only
The status of this conceptual row entry of ACE table. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. For a detailed description of this object, please refer to SNMPv2-TC MIB.
             tnAceLookup 1.3.6.1.4.1.868.2.5.3.1.1.5.4.1.22 truthvalue read-only
Specify the second lookup operation of the ACE.
     tnAceEtherTable 1.3.6.1.4.1.868.2.5.3.1.1.5.5 no-access
This table contains the related configuration of ACE when frame type is etherType.
         tnAceEtherEntry 1.3.6.1.4.1.868.2.5.3.1.1.5.5.1 no-access
This entry represents an etherType related ACE configuration.
             tnAceEtherSmacFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.5.1.1 integer read-write
Specify the source MAC filter for this ACE. any: No SMAC filter is specified. (SMAC filter status is 'dont-care'.) specific: If you want to filter a specific source MAC address with this ACE, choose this value. A field for entering an SMAC value appears. Enumeration: 'specific': 2, 'any': 1.
             tnAceEtherSmacVal 1.3.6.1.4.1.868.2.5.3.1.1.5.5.1.2 macaddress read-write
When 'Specific' is selected for the SMAC/DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is a hexadecimal digit). A frame that hits this ACE matches this SMAC value.
             tnAceEtherDmacFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.5.1.3 integer read-write
Specify the destination MAC filter for this ACE. any: No DMAC filter is specified. (DMAC filter status is 'dont-care'.) unicast: Frame must be unicast. multicast: Frame must be multicast. broadcast: Frame must be broadcast. specific: If you want to filter a specific destination MAC address with this ACE, choose this value. A field for entering a DMAC value appears. Enumeration: 'unicast': 2, 'broadcast': 4, 'multicast': 3, 'any': 1, 'specific': 5.
             tnAceEtherDmacVal 1.3.6.1.4.1.868.2.5.3.1.1.5.5.1.4 macaddress read-write
When 'Specific' is selected for the DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is a hexadecimal digit). A frame that hits this ACE matches this DMAC value.
             tnAceEtherTypeFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.5.1.5 integer read-write
Specify the Ethernet type filter for this ACE: any: No EtherType filter is specified. (EtherType filter status is 'don't-care'. specific: If you want to filter a specific EtherType filter with this ACE, you can enter a specific EtherType value. A field for entering a EtherType value appears. Enumeration: 'specific': 2, 'any': 1.
             tnAceEtherTypeVal 1.3.6.1.4.1.868.2.5.3.1.1.5.5.1.6 integer read-only
When 'Specific' is selected for the EtherType filter, you can enter a specific EtherType value. The allowed range is 0x600 to 0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and 0x86DD(IPv6). A frame that hits this ACE matches this EtherType value.
     tnAceArpTable 1.3.6.1.4.1.868.2.5.3.1.1.5.6 no-access
This table contains the related configuration of ACE when frame type is ARP.
         tnAceArpEntry 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1 no-access
This entry represents an ARP related ACE configuration.
             tnAceArpSmacFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.1 integer read-write
Specify the source MAC filter for this ACE. any: No SMAC filter is specified. (SMAC filter status is 'dont-care'.) specific: If you want to filter a specific source MAC address with this ACE, choose this value. A field for entering an SMAC value appears. Enumeration: 'specific': 2, 'any': 1.
             tnAceArpSmacVal 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.2 macaddress read-write
When 'Specific' is selected for the SMAC/DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is a hexadecimal digit). A frame that hits this ACE matches this SMAC value.
             tnAceArpDmacFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.3 integer read-write
Specify the destination MAC filter for this ACE. any: No DMAC filter is specified. (DMAC filter status is 'dont-care'.) unicast: Frame must be unicast. multicast: Frame must be multicast. broadcast: Frame must be broadcast. Enumeration: 'unicast': 2, 'broadcast': 4, 'multicast': 3, 'any': 1.
             tnAceArpParmArpRarp 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.4 integer read-write
Specify the available ARP/RARP opcode (OP) flag for this ACE. any: No ARP/RARP OP flag is specified. (OP is 'dont-care'.) arp: Frame must have ARP/RARP opcode set to ARP. rarp: Frame must have ARP/RARP opcode set to RARP. other: Frame has unknown ARP/RARP Opcode flag. Enumeration: 'arp': 2, 'rarp': 3, 'other': 4, 'any': 1.
             tnAceArpParmRequestReply 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.5 integer read-write
Specify the available requset/reply opcode (OP) flag for this ACE. any: No ARP/RARP OP flag is specified. (OP is 'dont-care'.) request: Frame must have ARP Request or RARP Request OP flag set. reply: Frame must have ARP Reply or RARP Reply OP flag. Enumeration: 'reply': 3, 'request': 2, 'any': 1.
             tnAceArpParmSenderIpFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.6 hostornetworkorany read-write
Specify the sender IP filter for this ACE. any: No sender filter is specified. (sender ip filter status is 'don't-care'.) host: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. network: If you want to filter a specific network address with this ECE, choose this value. A Two fields for entering a specific network address and network mask appears.
             tnAceArpParmSenderIpAddress 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.7 inetaddress read-write
When 'Host' or 'Network' is selected for the sender ip filter, you can enter a specific host or network address.
             tnAceArpParmSenderIpMask 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.8 inetaddress read-write
When 'Network' is selected for the sender ip filter, you can enter a specific network mask.
             tnAceArpParmTargetIpFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.9 hostornetworkorany read-write
Specify the target IP filter for this ACE. any: No sender filter is specified. (target ip filter status is 'don't-care'.) host: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. network: If you want to filter a specific network address with this ECE, choose this value. A Two fields for entering a specific network address and network mask appears.
             tnAceArpParmTargetIpAddress 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.10 inetaddress read-write
When 'Host' or 'Network' is selected for the target ip filter, you can enter a specific host or network address.
             tnAceArpParmTargetIpMask 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.11 inetaddress read-write
When 'Network' is selected for the target ip filter, you can enter a specific network mask.
             tnAceArpSenderMacMatch 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.12 truthvalueorany read-write
Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. 0: ARP frames where SHA is not equal to the SMAC address. 1: ARP frames where SHA is equal to the SMAC address. Any: Any value is allowed ('dont-care').
             tnAceArpRarpTargetMacMatch 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.13 truthvalueorany read-write
Specify whether frames can hit the action according to their target hardware address field (THA) settings. 0: RARP frames where THA is not equal to the SMAC address. 1: RARP frames where THA is equal to the SMAC address. Any: Any value is allowed ('dont-care').
             tnAceArpIpEthernetLength 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.14 truthvalueorany read-write
Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. 0: ARP/RARP frames where the HLN is not equal to Ethernet (0x06) or the (PLN) is not equal to IPv4 (0x04). 1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4 (0x04). Any: Any value is allowed ('dont-care').
             tnAceArpIp 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.15 truthvalueorany read-write
Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. 0: ARP/RARP frames where the HLD is not equal to Ethernet (1). 1: ARP/RARP frames where the HLD is equal to Ethernet (1). Any: Any value is allowed ('dont-care').
             tnAceArpEthernet 1.3.6.1.4.1.868.2.5.3.1.1.5.6.1.16 truthvalueorany read-write
Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. 0: ARP/RARP frames where the PRO is not equal to IP (0x800). 1: ARP/RARP frames where the PRO is equal to IP (0x800). Any: Any value is allowed ('dont-care').
     tnAceIpv4Table 1.3.6.1.4.1.868.2.5.3.1.1.5.7 no-access
This table contains the related configuration of ACE when frame type is IPv4.
         tnAceIpv4Entry 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1 no-access
This entry represents an IPv4 related ACE configuration.
             tnAceIpv4ProtoFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.1 integer read-write
Specify the IP protocol filter for this ACE. any: No IP protocol filter is specified. (Protocol filter status is 'don't-care'.) other: If you want to filter a specific IP protocol filter with this ACE, choose this value. A field for entering an IP protocol filter appears. icmp: Select ICMP to filter IPv4 ICMP protocol frames. Extra fields for defining ICMP parameters will appear. These fields are explained later in this help file. udp: Select UDP to filter IPv4 UDP protocol frames. Extra fields for defining UDP parameters will appear. These fields are explained later in this help file. tcp: Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining TCP parameters will appear. These fields are explained later in this help file. Enumeration: 'udp': 4, 'icmp': 3, 'other': 2, 'tcp': 5, 'any': 1.
             tnAceIpv4ProtoValue 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.2 integer read-write
When 'Specific' is selected for the IP protocol value, you can enter a specific value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP protocol value.
             tnAceIpv4Ttl 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.3 integer read-write
Specify the Time-to-Live settings for this ACE. zero: IPv4 frames with a Time-to-Live field greater than zero must not be able to match this entry. nonZero: IPv4 frames with a Time-to-Live field greater than zero must be able to match this entry. any: Any value is allowed ('don't-care'). Enumeration: 'nonZero': 3, 'zero': 2, 'any': 1.
             tnAceIpv4Fragment 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.4 integer read-write
Specify the fragment offset settings for this ACE. This involves the settings for the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame. any: Any value is allowed ('don't-care'). yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must be able to match this entry. no: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must not be able to match this entry. Enumeration: 'yes': 2, 'any': 1, 'no': 3.
             tnAceIpv4Option 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.5 integer read-write
Specify the options flag setting for this ACE. any: Any value is allowed ('don't-care'). yes: IPv4 frames where the options flag is set must be able to match this entry. no: IPv4 frames where the options flag is set must not be able to match this entry. Enumeration: 'yes': 2, 'any': 1, 'no': 3.
             tnAceIpv4SipFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.6 hostornetworkorany read-write
Specify the source IP filter for this ACE. any: No source IP filter is specified. (source ip filter is 'don't-care'.) host: Source IP filter is set to Host. Specify the source IP address in the SIP Address field that appears. network: Source IP filter is set to Network. Specify the source IP address and source IP mask in the SIP Address and SIP Mask fields that appear.
             tnAceIpv4SipAddress 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.7 inetaddress read-write
When 'Host' or 'Network' is selected for the source ip filter, you can enter a specific host or network address.
             tnAceIpv4SipMask 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.8 inetaddress read-write
When 'Network' is selected for the source ip filter, you can enter a specific network mask.
             tnAceIpv4DipFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.9 hostornetworkorany read-write
Specify the destination IP filter for this ACE. any: No destination IP filter is specified. (source ip filter is 'don't-care'.) host: Destination IP filter is set to Host. Specify the destination IP address in the SIP Address field that appears. network: Destination IP filter is set to Network. Specify the destination IP address and source IP mask in the DIP Address and DIP Mask fields that appear.
             tnAceIpv4DipAddress 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.10 inetaddress read-write
When 'Host' or 'Network' is selected for the destination ip filter, you can enter a specific host or network address.
             tnAceIpv4DipMask 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.11 inetaddress read-write
When 'Network' is selected for the destination ip filter, you can enter a specific network mask.
             tnAceIpv4IcmpTypeFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.12 integer read-write
Specify the ICMP filter for this ACE. any: No ICMP filter is specified. (ICMP filter status is 'dont-care'.) specific: If you want to filter a specific ICMP filter with this ACE, you can enter a specific ICMP value. A field for entering an ICMP value appears. Enumeration: 'specific': 2, 'any': 1.
             tnAceIpv4IcmpTypeValue 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.13 integer read-write
When 'Specific' is selected for the ICMP filter, you can enter a specific ICMP value. The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP value.
             tnAceIpv4IcmpCodeFilter 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.14 integer read-write
Specify the ICMP code filter for this ACE. any: No ICMP code is specified. (ICMP filter status is 'dont-care'.) specific: If you want to filter a specific ICMP code filter with this ACE, you can enter a specific ICMP code value. A field for entering an ICMP code value appears. Enumeration: 'specific': 2, 'any': 1.
             tnAceIpv4IcmpCodeValue 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.15 integer read-write
When 'Specific' is selected for the ICMP code filter, you can enter a specific ICMP code value. The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP code value.
             tnAceIPv4SrcPortFilterType 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.16 integer read-write
The TCP/UDP source port for matching the ACE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP source port filter is specified. (Source port filter status is 'don't-care'.) specific: If you want to filter a specific TCP/UDP source port No. with this ACE, choose this value. A field for entering a specific source port No. appears. range: If you want to filter a specific TCP/UDP source port range filter with this ACE, choose this value. A field for entering a range appears. Enumeration: 'specific': 2, 'range': 3, 'any': 1.
             tnAceIPv4SrcPortFilterNo 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.17 integer read-write
When 'Specific' is selected for the source port filter, you can enter a specific value. The allowed value is from 0 through 65535.
             tnAceIPv4SrcPortRangeStart 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.18 integer read-write
When 'Range' is selected for the source port filter, you can enter a specific range. The allowed range start is from 0 through 65535.
             tnAceIPv4SrcPortRangeEnd 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.19 integer read-write
When 'Range' is selected for the source port filter, you can enter a specific range. The allowed range end is from 0 through 65535.
             tnAceIPv4DstPortFilterType 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.20 integer read-write
The TCP/UDP destination port for matching the ACE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP destination port filter is specified. (Destination port filter status is 'don't-care'.) specific: If you want to filter a specific TCP/UDP destination port No. with this ACE, choose this value. A field for entering a specific No. appears. range: If you want to filter a specific TCP/UDP destination port range filter with this ACE, choose this value. A field for entering a range appears. Enumeration: 'specific': 2, 'range': 3, 'any': 1.
             tnAceIPv4DstPortFilterNo 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.21 integer read-write
When 'Specific' is selected for the destination port filter, you can enter a specific value. The allowed value is from 0 through 65535.
             tnAceIPv4DstPortRangeStart 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.22 integer read-write
When 'Range' is selected for the destination port filter, you can enter a specific range. The allowed range start is from 0 through 65535.
             tnAceIPv4DstPortRangeEnd 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.23 integer read-write
When 'Range' is selected for the destination port filter, you can enter a specific range. The allowed range end is from 0 through 65535.
             tnAceIPv4TcpFin 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.24 truthvalueorany read-write
Specify the TCP 'No more data from sender' (FIN) value for this ACE. 0: TCP frames where the FIN field is set must not be able to match this entry. 1: TCP frames where the FIN field is set must be able to match this entry. Any: Any value is allowed ('dont-care').
             tnAceIPv4TcpSyn 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.25 truthvalueorany read-write
Specify the TCP 'Synchronize sequence numbers' (SYN) value for this ACE. 0: TCP frames where the SYN field is set must not be able to match this entry. 1: TCP frames where the SYN field is set must be able to match this entry. Any: Any value is allowed ('dont-care').
             tnAceIPv4TcpRst 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.26 truthvalueorany read-write
Specify the TCP 'Reset the connection' (RST) value for this ACE. 0: TCP frames where the RST field is set must not be able to match this entry. 1: TCP frames where the RST field is set must be able to match this entry. Any: Any value is allowed ('dont-care').
             tnAceIPv4TcpPsh 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.27 truthvalueorany read-write
Specify the TCP 'Push Function' (PSH) value for this ACE. 0: TCP frames where the PSH field is set must not be able to match this entry. 1: TCP frames where the PSH field is set must be able to match this entry. Any: Any value is allowed ('dont-care').
             tnAceIPv4TcpAck 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.28 truthvalueorany read-write
Specify the TCP 'Acknowledgment field significant' (ACK) value for this ACE. 0: TCP frames where the ACK field is set must not be able to match this entry. 1: TCP frames where the ACK field is set must be able to match this entry. Any: Any value is allowed ('dont-care').
             tnAceIPv4TcpUrg 1.3.6.1.4.1.868.2.5.3.1.1.5.7.1.29 truthvalueorany read-write
Specify the TCP 'Urgent Pointer field significant' (URG) value for this ACE. 0: TCP frames where the URG field is set must not be able to match this entry. 1: TCP frames where the URG field is set must be able to match this entry. Any: Any value is allowed ('dont-care').
     tnAclStatusTable 1.3.6.1.4.1.868.2.5.3.1.1.5.8 no-access
This table shows the ACL status by different ACL users. Each row describes the ACE that is defined. It is a conflict if a specific ACE is not applied to the hardware due to hardware limitations. The maximum number of ACEs is 256 on each switch.
         tnAclStatusEntry 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1 no-access
This entry represents ACL status by different ACL users.
             tnAclStatusUser 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.1 integer no-access
Indicates the ACL user. Enumeration: 'ipmc': 3, 'arpinspection': 5, 'ethersat': 9, 'static': 1, 'mep': 4, 'ipsourceguard': 2, 'dhcp': 7, 'loopprotect': 8, 'linkoam': 10, 'ptp': 6.
             tnAclStatusIngressPort 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.2 portlist read-only
Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.
             tnAclStatusFrameType 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.3 integer read-only
Indicates the frame type of the ACE. Possible values are: Any: The ACE will match any frame type. EType: The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will not get matched by IP and ARP frames. ARP: The ACE will match ARP/RARP frames. IPv4: The ACE will match all IPv4 frames. IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol. IPv4/UDP: The ACE will match IPv4 frames with UDP protocol. IPv4/TCP: The ACE will match IPv4 frames with TCP protocol. IPv4/Other: The ACE will match IPv4 frames, which are not ICMP/UDP/TCP. IPv6: The ACE will match all IPv6 standard frames. Enumeration: 'arp': 3, 'ipv4icmp': 5, 'ipv4other': 8, 'ipv4': 4, 'ipv4tcp': 7, 'ipv6': 9, 'eType': 2, 'any': 1, 'ipv4udp': 6.
             tnAclStatusEtypeVal 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.4 integer read-only
Indicates the type value when frame type of the ACE is Ethernet Type.
             tnAclStatusAction 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.5 integer read-only
Indicates the forwarding action of the ACE. Permit: Frames matching the ACE may be forwarded and learned. Deny: Frames matching the ACE are dropped. Enumeration: 'deny': 2, 'permit': 1.
             tnAclStatusRateLimiter 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.6 ratelimitervalue read-only
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Disabled is displayed, the rate limiter operation is disabled.
             tnAclStatusPortRedirect 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.7 portlist read-only
Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. The allowed values are Disabled or a specific port number. When Disabled is displayed, the port redirect operation is disabled.
             tnAclStatusMirror 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.8 integer read-only
Specify the mirror operation of this port. The allowed values are: Enabled: Frames received on the port are mirrored. Disabled: Frames received on the port are not mirrored. The default value is 'Disabled'. Enumeration: 'enable': 1, 'disable': 2.
             tnAclStatusCpu 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.9 integer read-only
Forward packet that matched the specific ACE to CPU. Enumeration: 'yes': 1, 'no': 2.
             tnAclStatusCpuOnce 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.10 integer read-only
Forward first packet that matched the specific ACE to CPU. Enumeration: 'yes': 1, 'no': 2.
             tnAclStatusCounter 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.11 counter32 read-only
The counter indicates the number of times the ACE was hit by a frame.
             tnAclStatusConflict 1.3.6.1.4.1.868.2.5.3.1.1.5.8.1.12 integer read-only
Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. Enumeration: 'yes': 1, 'no': 2.