TIMETRA-OAM-TEST-MIB: View SNMP OID List / Download MIB

The maximum number of concurrent active OAM ping tests that are allowed within an agent implementation. A value of zero (0) for this object implies that there is no limit for the number of concurrent active tests in effect.

Defines the Alcatel-Lucent SROS OAM ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM ping test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an owner index. Such an initial index has a syntax of SnmpAdminString, and can thus be trivially mapped to a security name or group name as defined in VACM, in accordance with a security policy. When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given users entries in a particular table, the object identifiers for the information in these entries will have the same sub identifiers (except for the column sub identifier) up to the end of the encoded owner index. To configure VACM to permit access to this portion of the table, one would create vacmViewTreeFamilyTable entries with the value of vacmViewTreeFamilySubtree including the owner index portion, and vacmViewTreeFamilyMask wildcarding the column sub identifier. More elaborate configurations are possible.

The test name index of the Alcatel-Lucent SROS OAM ping test. This is locally unique, within the scope of an tmnxOamPingCtlOwnerIndex.

This object allows entries to be created and deleted in the tmnxOamPingCtlTable. Deletion of an entry in this table results in all corresponding (same tmnxOamPingCtlOwnerIndex and tmnxOamPingCtlTestIndex index values) tmnxOamPingResultsTable and tmnxOamPingHistoryTable entries being deleted. Activation of a Alcatel-Lucent SROS OAM ping operation is controlled via tmnxOamPingCtlAdminStatus and not by changing this objects value to active(1). The values for configuration objects required for the type of test specified in tmnxOamPingCtlTestMode MUST be specified prior to a transition to active(1) state being accepted. Transitions in and out of active(1) state are not allowed while an entrys tmnxOamPingResultsOperStatus is active(1) with the exception that deletion of an entry in this table by setting its RowStatus object to destroy(6) will stop an active Alcatel-Lucent SROS OAM ping operation. The operational state of an Alcatel-Lucent SROS OAM ping operation can be determined by examination of its tmnxOamPingResultsOperStatus object.

The storage type for this conceptual row. Conceptual rows having the value permanent need not allow write-access to any columnar objects in the row.

The purpose of this object is to provide a descriptive name of the OAM ping test.

Specifies the type of OAM ping test defined by this entry. The configuration parameters unique to a specific test type are to be found in an sparsely dependent table extension for that test type. none - the test type is unspecified. sdpPing - tests SDP connectivity and round trip time. mtuPing - tests MTU path size. svcPing - determines the existence and operative state of the service ID on the far end ESR. NOTE: This is a one-shot test. macQuery - obsolete. Originally specified functionality is as follows. - determines a specific address mapping for the service ID. See tmnxOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. macPing - determines address mappings for the service ID. See tmnxOamMacPingCtlTable for additional parameters. macPopulate - populates an OAM MAC address into the FIBs. See tmnxOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. macPurge - deletes an OAM MAC address from the FIBs. See tmnxOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. lspPing - tests LSP path connectivity and round trip time. See tmnxOamLspPingCtlTable for additional parameters. vprnPing - tests IP path connectivity and round trip time within a specified VPRN service. See tmnxOamVprnPingCtlTable for additional parameters. atmPing - tests ATM path connectivity and round trip time on an ATM VCC. See tmnxOamAtmPingCtlTable for additional parameters. mfibPing - tests IP multicast connectivity and round trip time within a specified VPLS service. See tmnxOamMfibPingCtlTable for additional parameters. cpePing - determines IP connectivity to a CPE within a specified VPLS service. See tmnxOamCpePingCtlTable for additional parameters. mrInfo - Get multicast routers capabilities and the list of interfaces with neighbors. vccvPing - tests pseudowire connectivity and round trip time. See tmnxOamVccvPingCtlTable for additional parameters. icmpPing - tests IP connectivity and round trip time. See tmnxOamIcmpPingCtlTable for additional parameters. dnsPing - tests DNS name resolution connectivity and round trip time. ancpLoopback - send an OAM loopback test request to the access node. See tmnxOamAncpTestCtlTable for additional parameters. p2mpLspPing - tests P2MP LSP path connectivity and round trip time. Test mode cannot be p2mpLspPing if SAA is enabled. See tmnxOamP2mpLspPingCtlTable for additional parameters. ethCfmLoopback - performs Ethernet Connectivity Fault Management (CFM) loopback tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmLoopback test are in tmnxOamEthCfmPingCtlTable. ethCfmTwoWayDelay - performs Ethernet Connectivity Fault Management (CFM) two way delay tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmTwoWayDelay test are in tmnxOamEthCfmPingCtlTable. mobGtpPing - Tests GTP (GPRS Tunnelling Protocol) path connectivity. ethCfmTwoWaySlm - performs Ethernet Connectivity Fault Management (CFM) two way Synthetic Loss Measurement (SLM) tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see TIMETRA-IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmTwoWaySlm test are in tmnxOamEthCfmPingCtlTable.

Reflects the desired state that a tmnxOamPingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this tmnxOamPingCtlEntry. disabled(2) - Deactivate the test as defined by this tmnxOamPingCtlEntry. An attempt to set tmnxOamPingCtlAdminStatus to enabled will fail if the parameters required by a particular OAM ping test mode have not been previously set. Upon completion of an OAM ping test, the agent will reset the value of this object to disabled. When this object has the value enabled an attempt to modify any of the test parameters will fail with an inconsistentValue error. If tmnxOamPingCtlTestMode equals either sdpPing or mtuPing, tmnxOamPingCtlOrigSdpId must have already been set. If tmnxOamPingCtlTestMode equals mtuPing, tmnxOamPingCtlMtuStartSize and tmnxOamPingCtlMtuEndSize must also have already been set. If tmnxOamPingCtlTestMode equals svcPing, tmnxOamPingCtlTgtAddress and tmnxOamPingCtlServiceId must have already been set. If tmnxOamPingCtlTestMode equals cpePing, tmnxOamPingCtlTgtAddress, and tmnxOamCpePingCtlSourceIpAddr are required. If tmnxOamPingCtlTestMode equals icmpPing, tmnxOamPingCtlTgtAddress must have already been set. If tmnxOamPingCtlTestMode equals dnsPing, tmnxOamPingCtlTgtAddress must have already been set. If tmnxOamPingCtlSAA has the value true and tmnxOamSaaCtlAdminStatus has a value outOfService, an attempt to set this object to enabled will fail with an inconsistentValue error. Refer to the corresponding tmnxOamPingResultsOperStatus to determine the operational state of the test defined by this entry.

Specifies the originating SDP-ID to be used for performing a sdp-ping or mtu-ping operation. This parameter is required only if tmnxOamPingCtlTestMode has a value of either sdpPing or mtuPing. The far-end address of the specified SDP-ID is the expected responder-id within each OAM reply message received. The specified SDP-ID defines the encapsulation of the SDP tunnel encapsulation used to reach the far-end. This can be IP/GRE or MPLS. The value of tmnxOamPingCtlFcName is used to define the outgoing forwarding class used for the SDP encapsulation. If the value of tmnxOamPingCtlOrigSdpId is invalid, or the SDP is administratively down, or unavailable, the OAM Echo request message probe is not sent and an appropriate error value is written to tmnxOamPingHistoryStatus for that probe entry. Once the interval timer expires, the next probe attempt will be made if required.

Specifies the return SDP-ID to be used by the far-end node for its message reply. This parameter is optional and is valid only if tmnxOamPingCtlTestMode has a value of sdpPing. If this SDP-ID does not exist on the far-end, terminates on another node different than the originating node, or some other issue prevents the far-end from using the specified SDP-ID, the OAM Echo message reply is sent using generic IP/GRE OAM encapsulation. The received forwarding class (as mapped on the ingress network interface for the far-end) defines the forwarding class encapsulation for the reply message.

The value of tmnxOamPingCtlFcName specifies the forwarding class to be used when launching the probe(s). The forwarding class name must be present in the index column of TIMETRA-QOS-MIB::tFCNameTable. This object is optional. As shown in the following table a) this object is applicable to a subset of the test types, and b) the default forwarding class depends on the test type. tmnxOamPingCtlTestMode Applicable? Default ---------------------- ----------- ------- cpePing yes be ethCfmLoopback yes nc ethCfmTwoWayDelay yes nc ethCfmTwoWaySlm yes nc icmpPing yes nc lspPing yes be macPing yes be p2mpLspPing yes be sdpPing yes be vccvPing yes be vprnPing yes be otherwise no N/A For ethCfmLoopback,ethCfmTwoWayDelay, and ethCfmTwoWaySlm, the forwarding class depends on whether the request is configured to egress on a network port or an access port. In the network port case, the forwarding class is the forwarding class of the pseudowire. In the access port case, the forwarding class is that of the SAPs egress encapsulation policy. For lspPing this is the forwarding class of the LSP tunnel. For macPing or sdpPing this is the forwarding class of the SDP encapsulation. For p2mpLspPing this is the forwarding class of the P2MP LSP tree. For vccvPing this is the forwarding class of the pseudowire. If forwarding classes are mapped by the applicable QoS policy, the probe(s) may be launched using a different forwarding class than the forwarding class specified by this object.

The value of tmnxOamPingCtlProfile specifies the profile to be used with the forwarding class specified in tmnxOamPingCtlFcName. This object is optional. As shown in the following table a) this object is applicable to a subset of the test types, and b) the default profile value depends on the test type. tmnxOamPingCtlTestMode Applicable? Default ---------------------- ----------- ------- cpePing yes out(2) ethCfmLoopback yes in(1) ethCfmTwoWayDelay yes in(1) ethCfmTwoWaySlm yes in(1) icmpPing no N/A lspPing yes out(2) macPing yes out(2) p2mpLspPing yes out(2) sdpPing yes out(2) vccvPing yes out(2) vprnPing yes out(2) otherwise no N/A

The value of tmnxOamPingCtlMtuStartSize specifies the size of the first OAM Echo message sent as part of an mtuPing test. Setting this object to a non-zero value is a prerequisite for starting an mtuPing test. Its value must be less than or equal to the value of tmnxOamPingCtlMtuEndSize. An attempt to set this object from a non-zero value to zero will fail with a wrongValue error. Changing the message size is a method of checking the ability of an SDP to support a particular path-mtu value. The size of the message does not include the SDP encapsulation, VC-Label (if applied) or any DLC headers or trailers.

The value of tmnxOamPingCtlMtuEndSize specifies the size of the last OAM Echo message sent as part of an mtuPing test. Setting this object to a non-zero value is a prerequisite for starting an mtuPing test. Its value must be greater than or equal to the value of tmnxOamPingCtlMtuStartSize. An attempt to set this object from a non-zero value to zero will fail with a wrongValue error.

Specifies the number of octets by which to increment the OAM Echo message request size for each message request sent when tmnxOamPingCtlTestMode is set equal to mtuPing. If the next incremented message size is greater than tmnxOamPingCtlMtuEndSize, the last message has already been sent. The next size message is not sent until a reply is received or three messages have timed out at the current size. This parameter is optional.

Specifies the Ipv4 address to be used as the destination for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of svcPing or vprnPing. This parameter is required for svcPing, vprnPing, cpePing and mrinfo. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamPingCtlTgtAddrType and tmnxOamPingCtlTgtAddress.

The value of tmnxOamPingCtlServiceId specifies the service ID of the service being tested. The applicability of tmnxOamPingCtlServiceId varies with the test type, as shown in the following table. tmnxOamPingCtlTestMode Applicability Related Virtual Router Object ---------------------- ------------- ----------------------------- cpePing mandatory none icmpPing optional tmnxOamPingCtlVRtrID macPing mandatory none macPopulate mandatory none macPurge mandatory none mfibPing mandatory none mrInfo optional tmnxOamPingCtlVRtrID svcPing mandatory none vprnPing mandatory none otherwise not applicable none When tmnxOamPingCtlServiceId is mandatory, a non-zero value must be provided. When tmnxOamPingCtlServiceId is optional, it is used to specify a VPRN service. The test must use the VPRN services virtual router. When a related virtual router object is shown, the interaction is described in the DESCRIPTION clause of the listed object. Service IDs larger than 2147483647 are internal, so they are excluded from the range. The default value is the null service ID.

When the value of tmnxOamPingCtlLocalSdp is true, the svcPing test determines an egress SDP-ID that is bound to the service that has the far-end IP address specified in tmnxOamPingCtlTgtAddress assigned to it. The far-end address of the specified SDP-ID is the expected responder-id within the OAM Echo reply message. The SDP-ID defines the encapsulation of the SDP tunnel encapsulation used to reach the far-end. This can be IP/GRE or MPLS. On the originator egress, the Service-ID must have an associated VC-Label to reach the far-end address of the SDP-ID and the SDP-ID must be operational for the message to be sent. This object is optional and valid only when tmnxOamPingCtlTestMode is equal to svcPing.

The value of tmnxOamPingCtlRemoteSdp specifies the encapsulation of the ping reply to be sent by the far end node. When tmnxOamPingCtlRemoteSdp is false, the far-end node sends the reply using the generic IP/GRE OAM encapsulation. When tmnxOamPingCtlRemoteSdp is true, the far-end node sends the reply using the same service tunnel encapsulation labeling used for the associated service traffic. If that labeling cannot be found, the generic IP/GRE OAM encapsulation is used. This object is optional and is applicable only when tmnxOamPingCtlTestMode is equal to svcPing.

The value of tmnxOamPingCtlSize specifies the size of the OAM Echo message. This parameter is optional and is valid only if tmnxOamPingCtlTestMode has a value of sdpPing, macPing, lspPing, vprnPing, mfibPing, vccvPing, icmpPing, p2mpLspPing, ethCfmLoopback or ethCfmTwoWaySlm. The minimum, maximum, and default values for the tmnxOamPingCtlTestMode cases are: ethCfmLoopback : 0, 1500, 0 ethCfmTwoWaySlm: 0, 1500, 0 icmpPing : 0, 16384, 56 lspPing : 80, 9198, 80 - LSP prefix specified : 92, 9198, 92 - LSP name specified macPing : 1, 9198, 72 mfibPing : 1, 9198, 72 p2mpLspPing : 92|97, 9198, 92 - LSP name, 0 S2L specified : 104|109, 9198, 104 - LSP name, 1 S2L specified : 112|117, 9198, 112 - LSP name, 2 S2L specified : 120|125, 9198, 120 - LSP name, 3 S2L specified : 128|133, 9198, 128 - LSP name, 4 S2L specified : 136|141, 9198, 136 - LSP name, 5 S2L specified : 88|93, 9198, 88 - LDP id, 0 leaf-addr specified : 100|105, 9198, 100 - LDP id, 1 leaf-addr specified : 108|113, 9198, 108 - LDP id, 2 leaf-addr specified : 116|121, 9198, 116 - LDP id, 3 leaf-addr specified : 124|129, 9198, 124 - LDP id, 4 leaf-addr specified : 132|137, 9198, 132 - LDP id, 5 leaf-addr specified : 92|97, 9198, 92 - LDP SSM, 0 leaf-addr specified : 104|109, 9198, 104 - LDP SSM, 1 leaf-addr specified : 112|117, 9198, 112 - LDP SSM, 2 leaf-addr specified : 120|125, 9198, 120 - LDP SSM, 3 leaf-addr specified : 128|133, 9198, 128 - LDP SSM, 4 leaf-addr specified : 136|141, 9198, 136 - LDP SSM, 5 leaf-addr specified sdpPing : 72, 9198, 72 vccvPing : 88, 9198, 88 - FEC 128 pseudowire : 120, 9198, 120 - FEC 129 pseudowire vprnPing : 1, 9198, 72 An RSVP-TE P2MP LSP consists of source-to-leaf (S2L) sub-LSPs. For P2MP LSP ping, a gap in the supported range of tmnxOamPingCtlSize arises from the inclusion of the Pad TLV (see RFC 4379 section 3.4). For example, when no S2L sub-LSP is specified for a RSVP P2MP LSP, the minimum ping size is 92. But the next valid minimum ping size is 97 due to the inclusion of the Pad TLV. When the OAM message is encapsulated in an IP/GRE SDP, the IP DF (Dont Fragment) bit is set. If any segment of the path between the sender and receiver cannot handle the message size, the message is discarded. MPLS LSPs are not expected to fragment the message either, as the message contained in the LSP is not an IP packet. When tmnxOamPingCtlTestMode has a value of ethCfmLoopback or ethCfmTwoWaySlm, the value of this object specifies the number of octets in the Value field of the Data TLV of the Ethernet CFM packet. If zero is specified, the packet has no Data TLV. When tmnxOamPingCtlTestMode has a value of icmpPing, the value of this object specifies the payload size following the ICMP header. Before 6.0 release, the minimum size in sdpPing is 40 octets. Such shorter packet has no timestamp information but should still be accepted for interoperability purpose. However, new sdpPing should include the timestamp information.

The value of tmnxOamPingCtlTimeOut specifies the time-out value, in seconds, to be used during a test run. Timers (with duration configured using the tmnxOamPingCtlTimeOut value) are used in one of two ways during a test run. 1. Per Probe: a timer is started each time a probe is sent. If the timer expires before the probe response arrives, the probe is declared failed. This is the traditional time-out method for a sequence of probes. OR 2. Per Test: a timer is started once per test run, when the last probe of the test run is sent. ANY probe which does not have a response when the timer expires is declared failed. SROS chooses Per Probe or Per Test based on the tmnxOamPingCtlTestMode value. The choice is not configurable. The accepted minimum, maximum, and default values for tmnxOamPingCtlTimeOut depend on tmnxOamPingCtlTestMode, as shown in the following table. The table also shows the timer usage for the test mode. tmnxOamPingCtlTestMode Min Max Def Timer Usage ---------------------- --- --- --- ----------- atmPing 1 10 5 Per Probe dnsPing 1 120 5 Per Probe ethCfmLoopback 1 10 5 Per Probe ethCfmTwoWayDelay 1 10 5 Per Test ethCfmTwoWaySlm 1 10 5 Per Test icmpPing 1 10 5 Per Test lspPing 1 10 5 Per Probe macPing 1 10 5 Per Probe mfibPing 1 100 5 Per Probe mtuPing 1 10 5 Per Probe p2mpLspPing 1 120 10 Per Probe sdpPing 1 10 5 Per Probe vccvPing 1 10 5 Per Probe vprnPing 1 100 5 Per Probe otherwise ......... the value of tmnxOamPingCtlTimeOut is irrelevant

The value of tmnxOamPingCtlProbeCount specifies the number of probes to send during the test. The maximum probe count depends on the value of tmnxOamPingCtlTestMode, as follows: macPopulate, macPurge,p2mpLspPing, svcPing : 1 ethCfmTwoWayDelay, ethCfmTwoWaySlm : 1000 icmpPing : 100000 otherwise : 100 For the following tmnxOamPingCtlTestMode values, the value of tmnxOamPingCtlProbeCount does not affect the behavior of the test: mrInfo, mtuPing. If tmnxOamPingCtlTestMode is icmpPing, the default probe count value is 5. Otherwise, the DEFVAL applies.

The value of tmnxOamPingCtlInterval specifies the time to wait between the transmission of one OAM Echo request and the next. The UNITS are specified by tmnxOamPingCtlIntervalUnits. For example, if tmnxOamPingCtlInterval has the value 1, and tmnxOamPingCtlIntervalUnits has the value centiseconds(2), the interval between OAM Echo requests is 0.01 seconds. The applicability, range, and default value of the interval specified using the tmnxOamPingCtlInterval and tmnxOamPingCtlIntervalUnits pair vary with tmnxOamPingCtlTestMode and tmnxOamIcmpPingCtlRapid, as shown in the following table. tmnxOamPingCtlTestMode Supported Values (sec) Default (sec) ethCfmLoopback 1, 2, .. 10 5 ethCfmTwoWayDelay 0.1, 0.2, .. 0.9; 1, 2, .. 10 5 ethCfmTwoWaySlm 0.1, 0.2, .. 0.9; 1, 2, .. 10 5 icmpPing with RAPID 0.01, 0.02, .. 100.00 0.01 icmpPing without RAPID 1, 2, .. 10000 1 p2mpLspPing not applicable otherwise 1, 2, .. 10 1

The maximum number of entries allowed in the tmnxOamPingHistoryTable for this OAM ping test. The agent will remove the oldest entry in the tmnxOamPingHistoryTable to allow the addition of an new entry once the number of rows in the tmnxOamPingHistoryTable reaches this value. Old entries are not removed when a new test is started. Entries are added to the tmnxOamPingHistoryTable until tmnxOamPingCtlMaxRows is reached before entries begin to be removed. p2mpLspPing uses a default value of 400, which is the maximum number of leaves per P2MP LSP tree. A value of 0 for this object disables creation of tmnxOamPingHistoryTable entries. This object was obsoleted in release 6.0R17.

The value of tmnxOamPingCtlTrapGeneration specifies the notification(s) to send for a test run. Each bit enables the transmission of one notification, as follows. probeFailure(0): send one tmnxOamPingProbeFailedV3 notification if at least M successive probes failed during the test run. M is configured using tmnxOamPingCtlTrapProbeFailureFilter. testFailure(1): send one tmnxOamPingTestFailedV3 notification if at least N probes failed during the test run. N is configured using tmnxOamPingCtlTrapTestFailureFilter. testCompletion(2): send one tmnxOamPingTestCompletedV3 notification when the test run is complete.

The value of this object is used to determine when to generate a tmnxOamPingProbeFailed NOTIFICATION. Setting tmnxOamPingCtlTrapGeneration to probeFailure (0) implies that a tmnxOamPingProbeFailed NOTIFICATION is generated only when the number of successive probe failures, as indicated by the value of tmnxOamPingCtlTrapProbeFailureFilter, fail within a given ping test.

The value of this object is used to determine when to generate a tmnxOamPingTestFailed NOTIFICATION. Setting tmnxOamPingCtlTrapGeneration to testFailure (1) implies that a tmnxOamPingTestFailed NOTIFICATION is generated only when the number of ping failures within a test exceed the value of tmnxOamPingCtlTrapTestFailureFilter.

The value of tmnxOamPingCtlSAA specifies if this test is an SAA test (Service Assurance Agent; true), or an OAM test (false). If there is a tmnxOamSaaCtlTable row with the specified index values, true is returned. Otherwise, false is returned.

The value of tmnxOamPingCtlRuns indicates the number of times this OAM ping test has been executed.

The value of tmnxOamPingCtlFailures indicates the number of times this OAM ping test has failed.

The value of tmnxOamPingCtlLastRunResult indicates the completion status the last time this test was executed. If this OAM test is currently in progress, this object indicates the result of the previous test run, if any.

The value of tmnxOamPingCtlLastChanged indicates the time the value of a settable object in this row was last changed.

The value of tmnxOamPingCtlVRtrID specifies the virtual router to be used for the test. The value specified must be the index of an active row in TIMETRA-VRTR-MIB::vRtrConfTable. This object is applicable if tmnxOamPingCtlTestMode is icmpPing or mrInfo. When directing an icmpPing or mrInfo test to use a virtual router associated with a VPRN service, the virtual router can be specified using tmnxOamPingCtlVRtrID (with the VPRNs virtual router number) or tmnxOamPingCtlServiceId (with the VPRNs service number). tmnxOamPingCtlServiceId is preferred, because service numbers are constant across an SROS reboot (while virtual routers may be renumbered). If non-default values are specified for both tmnxOamPingCtlVRtrID and tmnxOamPingCtlServiceId, tmnxOamPingCtlServiceId is used. Setting this object is optional.

The value of tmnxOamPingCtlTgtAddrType specifies the address type of tmnxOamPingCtlTgtAddress. Values supported depend on tmnxOamPingCtlTestMode, as follows. cpePing : ipv4(1) dnsPing : ipv4(1) ipv6(2) icmpPing: ipv4(1) ipv6(2) ipv6z(4) dns(16) mfibPing: ipv4(1) ipv6(2) mrInfo : ipv4(1) dns(16) svcPing : ipv4(1) vccvPing: unknown(0) ipv4(1) vprnPing: ipv4(1) ipv6(2) otherwise : unknown(0)

The value of tmnxOamPingCtlTgtAddress specifies the destination IP host address to be used when performing an OAM ping operation. The corresponding address type is configured using tmnxOamPingCtlTgtAddrType. For dnsPing this is the address of the DNS server host that will be asked to resolve a dns name specified by tmnxOamPingCtlDnsName.

The value of tmnxOamPingCtlSrcAddrType specifies the address type of tmnxOamPingCtlSrcAddress. Only ipv4 and ipv6 address types are supported.

The value of tmnxOamPingCtlSrcAddress specifies the source IP host address to be used when performing an OAM ping operation. The corresponding address type is configured using tmnxOamPingCtlSrcAddrType. This is an optional parameter. It is used when tmnxOamPingCtlTestMode is icmpPing, dnsPing, lspPing, p2mpLspPing (LDP), or vccvPing.

The value of tmnxOamPingCtlDnsName specifies the DNS name to be resolved to an IP address. This object is required for dnsPing.

The value of tmnxOamPingCtlDNSRecord specifies which DNS record is to be retrieved in this test.

The value of tmnxOamPingCtlIntervalUnits specifies the units for tmnxOamPingCtlInterval. For example, if tmnxOamPingCtlIntervalUnits has the value centiseconds(2), and tmnxOamPingCtlInterval has the value 10, the tests interval is 0.1 seconds. The supported combinations of tmnxOamPingCtlIntervalUnits, tmnxOamPingCtlInterval, tmnxOamPingCtlTestMode, and tmnxOamIcmpPingCtlRapid are specified in the tmnxOamPingCtlInterval DESCRIPTION clause. The interaction between this object and tmnxOamIcmpPingCtlRapid is specified in the tmnxOamIcmpPingCtlRapid DESCRIPTION clause.

Defines the OAM Ping Results Table for providing the capability of performing OAM ping operations. The results of these operations are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable. An entry is added to the tmnxOamPingResultsTable when an tmnxOamPingCtlEntry is started by successful transition of its tmnxOamPingCtlAdminStatus object to enabled(1). An entry is removed from the tmnxOamPingResultsTable when its corresponding tmnxOamPingCtlEntry is deleted.

Defines an entry in the tmnxOamPingResultsTable. The tmnxOamPingResultsTable has the same indexing as the tmnxOamPingCtlTable in order for a tmnxOamPingResultsEntry to correspond to the tmnxOamPingCtlEntry that caused it to be created. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in tmnxOamPingCtlTable.

Reflects the operational state of a tmnxOamPingCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped.

The minimum OAM ping round-trip-time (RTT) received. This value is relevant when tmnxOamPingCtlTestMode has a value of sdpPing, ethCfmLoopback, ethCfmTwoWayDelay, or ethCfmTwoWaySlm. Otherwise, this object contains a value of 0.

The maximum OAM ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received. This value is relevant when tmnxOamPingCtlTestMode has a value of sdpPing, ethCfmLoopback, ethCfmTwoWayDelay, or ethCfmTwoWaySlm. Otherwise, this object contains a value of 0.

The current average OAM ping round-trip-time (RTT). This value is relevant when tmnxOamPingCtlTestMode has a value of sdpPing, ethCfmLoopback, ethCfmTwoWayDelay, or ethCfmTwoWaySlm. Otherwise, this object contains a value of 0.

The value of tmnxOamPingResultsRttSumOfSquares indicates the least significant 32 bits of tmnxOamPingResultsRttHCSumSquares.

This object contains the largest size OAM Echo request message that received a valid reply. The value of this object MUST be reported as 0 when no ping responses have been received or an active test has not yet timed out. When tmnxOamPingCtlTestMode does not have a value of mtuPing, this object is not relevant and should contain a value of 0.

The object contains the final results of an OAM svcPing test. The value of this object MUST be reported as 0 when no ping responses have been received or an active test has not yet timed out. When tmnxOamPingCtlTestMode does not have a value of svcPing, this object is not relevant and should contain a value of 0.

Number of responses received for the corresponding tmnxOamPingCtlEntry and tmnxOamPingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received.

The value of this object reflects the number of probes sent for the corresponding tmnxOamPingCtlEntry and tmnxOamPingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent.

Date and time when the last response was received for an OAM probe. If a response has not been received, 1970-1-1,0:0:0.0,+0:0 is returned.

A copy of the OAM header of the last response packet received for this OAM ping test. The value of this object MUST be reported as 0 when no probes have been sent. This object was obsoleted in release 8.0R1 and replaced with tmnxOamPingHistoryRespHdr in tmnxOamPingHistoryTable.

The minimum OAM ping outbound one-way trip time received. A value of 0 for this object implies that no one-way trip time measurement is available.

The maximum OAM ping outbound one-way trip time received. A value of 0 for this object implies that no one-way trip time measurement is available.

The current average OAM ping outbound one-way trip time. A value of 0 for this object implies that no one-way trip time measurement is available.

The value of tmnxOamPingResultsTtSumOfSquares indicates the least significant 32 bits of tmnxOamPingResultsTtHCSumSquares.

The minimum OAM ping inbound one-way trip time received. A value of 0 for this object implies that no one-way trip time measurement is available.

The maximum OAM ping inbound one-way trip time received. A value of 0 for this object implies that no one-way trip time measurement is available.

The current average OAM ping inbound one-way trip time. A value of 0 for this object implies that no one-way trip time measurement is available.

The value of tmnxOamPingResultsInTtSumOfSqrs indicates the least significant 32 bits of tmnxOamPingResultsInTtHCSumSqrs.

The value of tmnxOamPingResultsOutJitter indicates the amount of one-way trip jitter, expressed in microseconds, for a ping probe request packet sent for this OAM test. A value of 0 for this object implies that no one-way trip jitter measurement is available.

The value of tmnxOamPingResultsInJitter indicates the amount of one-way trip jitter, expressed in microseconds, for a ping probe response packet received for this OAM test. A value of 0 for this object implies that no one-way trip jitter measurement is available.

The value of tmnxOamPingResultsRtJitter indicates the amount of two-way trip jitter, expressed in microseconds, for a ping probe sent for this OAM test. A value of 0 for this object implies that no two-way-trip jitter measurement is available.

The value of tmnxOamPingResultsProbeTimeouts indicates the number of probes timed out without receiving a response.

The value of tmnxOamPingResultsProbeFailures indicates the total number of probes that failed to be transmitted plus the number of probes that timed out without receiving a response.

The value of tmnxOamPingResultsTestRunIndex identifies the row entry that reports results for a single OAM test run. The agent starts assigning tmnxOamPingResultsTestRunIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object.

The value of tmnxOamPingResultsRttOFSumSquares indicates the number of times tmnxOamPingResultsRttSumOfSquares overflowed.

The value of tmnxOamPingResultsRttHCSumSquares indicates the sum of squares of the round trip times of the ping test. Its purpose is to enable the standard deviation calculation. The value of this object will be reported as 0 when one or more of the following conditions apply: 1. No round trip time measurement is available. 2. The test stopped before completion. 3. The test type (i.e. tmnxOamPingCtlTestMode) is one of the following: ancpLoopback, atmPing, macPopulate, macPurge, mfibPing, mrInfo, mtuPing, p2mpLspPing, svcPing.

The value of tmnxOamPingResultsTtOFSumSquares indicates the number of times tmnxOamPingResultsTtSumOfSquares overflowed.

The value of tmnxOamPingResultsTtHCSumSquares indicates the sum of squares of the outbound one-way trip times of the ping test. Its purpose is to enable the standard deviation calculation. The value of this object will be reported as 0 when one or more of the following conditions apply: 1. No outbound one-way trip time measurement is available. 2. The test stopped before completion. 3. The test type (i.e. tmnxOamPingCtlTestMode) is one of the following: ancpLoopback, atmPing, cpePing (sum of squares supported for round trip, not outbound), dnsPing (sum of squares supported for round trip, not outbound), macPopulate, macPurge, mfibPing, mrInfo, mtuPing, p2mpLspPing, svcPing.

The value of tmnxOamPingResultsInTtOFSumSqrs indicates the number of times tmnxOamPingResultsInTtSumOfSqrs overflowed.

The value of tmnxOamPingResultsInTtHCSumSqrs indicates the sum of squares of the inbound one-way trip times of the ping test. Its purpose is to enable the standard deviation calculation. The value of this object will be reported as 0 when one or more of the following conditions apply: 1. No inbound one-way trip time measurement is available. 2. The test stopped before completion. 3. The test type (i.e. tmnxOamPingCtlTestMode) is one of the following: ancpLoopback, atmPing, cpePing (sum of squares supported for round trip, not inbound), dnsPing (sum of squares supported for round trip, not inbound), macPopulate, macPurge, mfibPing, mrInfo, mtuPing, p2mpLspPing, svcPing.

The object contains the overall state of the ping test.

Defines a table for storing the results of an OAM ping probe operation. The probe results for all OAM ping test types are saved in this table except for macPing. The macPing results are saved in the tmnxOamMacPingHistoryTable. For a configured test, this table will hold the results for up to 3 runs. An entry in this table is created when the result of an OAM ping probe is determined. An entry is removed from this table when its corresponding tmnxOamPingCtlEntry is deleted.

Defines an entry in the tmnxOamPingHistoryTable. The first two index elements identify the tmnxOamPingCtlEntry that a tmnxOamPingHistoryEntry belongs to. The third index identifies a specific OAM test run. The fourth index element selects a single OAM probe result.

An entry in this table is created when the result of a OAM ping probe is determined. The initial 2 instance identifier index values identify the tmnxOamPingCtlEntry that a OAM probe result (tmnxOamPingHistoryEntry) belongs to. The tmnxOamPingHistoryIndex element selects a single OAM probe result. The agent starts assigning tmnxOamPingHistoryIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object.

The amount of time measured in microseconds from when a OAM probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit an OAM probe.

The amount of time measured in microseconds from when a OAM probe was sent to when it was received by the replier. The value of this object is reported as 0 when it is not possible to transmit an OAM probe or the information is not available.

The value of tmnxOamPingHistorySize indicates the size of the OAM echo request transmitted for this OAM probe. Zero is returned if no probe has been transmitted. When tmnxOamPingCtlTestMode is ethCfmLoopback, ethCfmTwoWayDelay, or ethCfmTwoWaySlm the size of the trasmitted layer 2 frame (including the layer 2 header) is returned. For other tmnxOamPingCtlTestMode values, the size returned is the tmnxOamPingCtlSize value.

The result of a particular OAM test probe.

Time stamp for when this OAM probe result was determined.

The value of tmnxOamPingHistoryReturnCode is an enumerated integer that indicates the OAM return code received in the OAM ping response.

Specifies the Ipv4 address of the remote node that generated this reply to a OAM probe. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamPingHistorySrcAddrType and tmnxOamPingHistorySrcAddress.

The value of tmnxOamPingHistAddressType specifies the type of binding address information returned in response to a vprnPing mfibPing, or cpePing test.

The value of tmnxOamPingHistSapId is the name of the access port of the SAP supporting the requests returned in response to a vprnPing, mfibPing or cpePing probe. If the value of tmnxOamPingHistAddressType is not sapId, this object is not relevant and MUST have a null string .

The value of tmnxOamPingHistoryVersion indicates the protocol version for this OAM ping probe reply.

tmnxOamPingHistoryCpeMacAddr is set to 0 except in case of a cpePing, where it contains the mac address of the replying CPE for this OAM ping probe reply.

The value tmnxOamPingHistoryRespSvcId indicates for an mfibPing the service id to which the SAP responding to the mfibPing probe belongs. If the indicated SAP is part of the same service originating the probe, this value is set to 0. For other types of probes, this value is insignificant and is also set to 0.

The value tmnxOamPingHistorySequence indicates this probes sequence number. If a probe response was received, this object indicates the sequence number of the response.

The value of tmnxOamPingHistoryIfIndex indicates the ifIndex of the interface that this probe was transmitted from. This object applies to lspPing and vccvPing tests. For other test modes, this value is not significant and is set to 0.

The value of tmnxOamPingHistoryDataLen indicates for an lspPing the UDP data length of the echo reply, and for icmpPing normally the length starting after the IP header of the echo reply. For ethCfmLoopback and ethCfmTwoWaySlm the value is the number of octets in the Value field of the Data TLV of the Ethernet CFM loopback packet (zero if the packet has no Data TLV). For other types of probes, this value is not significant and is set to 0.

The value of tmnxOamPingHistoryRespPlane indicates the response plane from which this ping response was received.

The value of tmnxOamPingHistoryReqHdr is a copy of the OAM header of the request packet sent for this OAM ping test probe. The request header is reported only when tmnxOamPingCtlTestMode has a value of svcPing, sdpPing mtuPing, ethCfmLoopback, ethCfmTwoWayDelay, or ethCfmTwoWaySlm. Otherwise, a zero length OCTET STRING is returned. This object was marked obsolete in SROS release 10.0 R1.

The value of tmnxOamPingHistoryRespHdr is a copy of the OAM header of the response packet received for this OAM ping test probe. The response header is reported only when tmnxOamPingCtlTestMode has a value of svcPing, sdpPing, mtuPing, icmpPing, ethCfmLoopback, ethCfmTwoWayDelay, or ethCfmTwoWaySlm. Otherwise, a zero length OCTET STRING is returned. For icmpPing the value reported is the received ICMP message starting from the IP header. The value of this object MUST be reported as a zero length OCTET STRING when no probe response has been received.

The value of tmnxOamPingHistoryDnsAddrType indicates the Internet address type stored in tmnxOamPingHistoryDnsAddress. If this was not a dnsPing test or the dns name specified in tmnxOamPingCtlDnsName could not be resolved, the value of this object will be reported as unknown.

The value of tmnxOamPingHistoryDnsAddress indicates the Internet address that was resolved from the name specified in tmnxOamPingCtlDnsName by a dnsPing test. If this was not a dnsPing test or the dns name specified in tmnxOamPingCtlDnsName could not be resolved, the value of this object will be reported as H (empty string).

The value of tmnxOamPingHistorySrcAddrType indicates the Internet address type of the address stored in tmnxOamPingHistorySrcAddress.

The value of tmnxOamPingHistorySrcAddress indicates the Internet address of the remote node that generated this reply to a OAM probe.

The value of tmnxOamPingHistoryInOneWayTime indicates the amount of time measured in microseconds from when an OAM probe reply was sent to when it was received by this host (in-bound one-way time). The value of this object is reported as 0 when the information is not available.

The value of tmnxOamPingHistoryLspName indicates the name of the LSP that this probe was transmitted on. The empty string is returned when the test mode is not vccvPing. The empty string is returned when the transport tunnel is not RSVP.

The value of tmnxOamPingHistNextHopAddrType indicates the Internet address type of the address stored in tmnxOamPingHistNextHopAddress. The value unknown(0) is returned when the test mode is not vccvPing.

The value of tmnxOamPingHistNextHopAddress indicates the next hop Internet address that this probe was transmitted to. The empty string is returned when the test mode is not vccvPing.

The value of tmnxOamPingHistorySrcGlobalId indicates the source MPLS-TP global identifier of the replying node. The value is copied from the replys RFC 6426 Source Identifier TLV. If the TLV is absent, zero is returned. This value is relevant when tmnxOamPingCtlTestMode is lspPing or vccvPing. Otherwise, zero is returned.

The value of tmnxOamPingHistorySrcNodeId indicates the source MPLS-TP node identifier of the replying node. The value is copied from the replys RFC 6426 Source Identifier TLV. If the TLV is absent, zero is returned. This value is relevant when tmnxOamPingCtlTestMode is lspPing or vccvPing. Otherwise, zero is returned.

The value of tmnxOamPingHistorySdpBindId indicates the SDP binding provided by the remote system. The value of tmnxOamPingHistorySdpBindId is relevant when tmnxOamPingHistAddressType is sdpBindId(9).

The value of tmnxOamPingHistoryRtrnSubcode indicates the value present in an MPLS echo replys RFC 4379 Return Subcode (RSC) field. A valid value is returned when the test has a tmnxOamPingCtlTestMode value of lspPing. Otherwise, zero is returned.

Defines the Alcatel-Lucent SROS OAM MAC Ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM macPing, macPopulate, or macPurge test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamMacPingHistoryTable. There will be no entries for these test in the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamMacPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamMacPingCtlTargetMacAddr is a 6-octet value that specifies the target MAC address to be used in the query request for performing an OAM ping operation. This parameter is required.

The value of tmnxOamMacPingCtlSourceMacAddr is a 6-octet value that specifies the MAC address to be used as the source in the query request for performing an OAM ping operation. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPing.

When the value of tmnxOamMacPingCtlSendControl is true, the OAM ping packet is sent directly to the destination IP address via the control plane. If its value is false, the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPopulate, macPurge or macPing.

When the value of tmnxOamMacPingCtlReplyControl is true, the OAM ping response is returned using the control plane. If its value is false, the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPing.

Specifies the vc-label time-to-live value. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPing. While performing the test with a ttl of 1 no responses should ever be expected.

When the value of tmnxOamMacPingCtlRegister is true, the OAM ping request is transmitted that causes each upstream node to delete the MAC address only from its forwarding plane but keep it in its control plane in order to inhibit dynamic learning. If its value is false, the MAC address is deleted from both the forwarding and control planes. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPurge.

When the value of tmnxOamMacPingCtlFlood is true, the OAM ping request is transmitted that causes each upstream node to add or delete the MAC address. If its value is false, the operation is performed locally. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPopulate or macPurge.

When the value of tmnxOamMacPingCtlForce is true, the MAC type in the FIB is forced to be labeled OAM type if it already existed as dynamic or static. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPopulate.

The value of tmnxOamMacPingCtlAge specifies the number of seconds to age this OAM MAC address in the FIB. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPopulate.

The value of tmnxOamMacPingCtlSapPortId is the ID of the access port of the target SAP. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPopulate.

The value of tmnxOamMacPingCtlSapEncapValue is the label used to identify the target SAP on the port specified in tmnxOamMacPingCtlSapPortId. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPopulate.

The value of tmnxOamMacPingCtlFibEntryName is the fib entry name to associate with the target MAC address. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than macPopulate.

Defines a table for storing the results of an OAM macPing probe operation. The number of entries in this table for a test is limited to the results of 3 runs. An entry in this table is created when the result of an OAM macPing probe is determined. An entry is removed from this table when its corresponding tmnxOamPingCtlEntry is deleted.

Defines an entry in the tmnxOamPingHistoryTable. The first two index elements identify the tmnxOamPingCtlEntry that a tmnxOamMacPingHistoryEntry belongs to. The third index identifies a specific run of the OAM test. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth index selects a single OAM macPing reply.

An entry in this table is created when the result of a OAM macPing probe is determined. The initial 2 instance identifier index values identify the tmnxOamPingCtlEntry that a OAM probe result (tmnxOamMacPingHistoryEntry) belongs to. The tmnxOamMacPingHistoryIndex has the value of the sequence number of the request probe and identifies a group of replies received in response to a specific probe transmission. The agent starts assigning tmnxOamMacPingHistoryIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object.

The tmnxOamMacPingReplyIndex is unique within a group of responses received as the result of a OAM macPing probe as specified by having the same value for tmnxOamMacPingHistoryIndex. The agent starts assigning tmnxOamMacPingReplyIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object.

The amount of time measured in microseconds from when a OAM probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit an OAM probe.

The amount of time measured in microseconds from when an OAM probe was sent to when it was received by the replier (out-bound one-way time). The value of this object is reported as 0 when it is not possible to transmit an OAM probe or the information is not available.

The value of tmnxOamMacPingHistoryStatus is an enumerated integer that indicates the result of a particular OAM probe.

Timestamp for when this OAM probe result was determined.

The value of tmnxOamMacPingHistoryReturnCode is an enumerated integer that indicates the return code received in the OAM ping response.

The value of tmnxOamMacPingHistorySrcIpAddress specifies the Ipv4 address of the remote node that generated this reply to a OAM probe. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMacPingHistorySrcAddrType and tmnxOamMacPingHistorySrcAddress.

The value of tmnxOamMacPingHistoryAddressType specifies the type of binding address information returned in response to a macPing test.

The value of tmnxOamMacPingHistorySapId is the name of the access port of the SAP supporting the requested MAC address returned in response to a macPing probe. If the value of tmnxOamMacPingHistoryAddressType is not sapId, this object is not relevant and MUST have a null string .

The value of tmnxOamMacPingHistorySdpId is the ID of the SDP supporting the requested MAC address returned in response to a macPing probe. If the value of tmnxOamMacPingHistoryAddressType is not sdpId, this object is not relevant and MUST return a value of 0.

The value of tmnxOamMacPingHistoryAdminStatus indicates the current administrative state of the SAP or SDP ID returned in response to a macPing test. A value of true indicates the SAP or SDP is administratively up. The value of this object MUST be reported as false when no ping responses have been received or an active test has not yet timed out.

The value of tmnxOamMacPingHistoryOperStatus indicates the current operational state of the SAP or SDP ID returned in response to a macPing test. A value of true indicates the SAP or SDP is operationally up. The value of this object MUST be reported as false when no ping responses have been received or an active test has not yet timed out.

The value of tmnxOamMacPingHistoryResponsePlane indicates the response plane from which this ping response was received.

The value of tmnxOamMacPingHistorySize indicates the size in octets of the user payload in a ping request packet. It does not include the service encapsulation.

The amount of time measured in microseconds from when an OAM probe reply was sent to when it was received by this host (in-bound one-way time). The value of this object is reported as 0 when the information is not available.

The value of tmnxOamMacPingHistorySrcAddrType indicates the Internet address type stored in tmnxOamMacPingHistorySrcAddress.

The value of tmnxOamMacPingHistorySrcAddress indicates the Internet address of the remote node that generated this reply to a OAM probe.

Defines a table for storing the results of an OAM macQuery probe operation where a L2 mapping TLV is returned. Only one downstream and one upstream L2 mapping entry is returned if the macQuery replier has no egress mapping for the requested MAC address but it does have an SDP binding. Multiple downstream L2 mappings that specify the repliers flooding domain may be returned if the replier has no bindings for the MAC address. An entry in this table is created when the result of an OAM macQueryprobe is determined. An entry is removed from this table when its corresponding tmnxOamPingCtlEntry is deleted.

Defines an entry in the tmnxOamMacPingL2MapTable. The first two index elements identify the tmnxOamPingCtlEntry that a tmnxOamMacPingL2MapEntry belongs to. The third index element identifies a specific OAM test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth index selects a single OAM macQuery reply. Note that in the case of a successful macQuery reply there will be only two row entries created per test run. However there may also be one or more error replies. The sixth index selects a single L2 mapping entry within a specific probe reply.

An entry in this table is created when the result of a OAM macQuery probe is determined. The initial 2 instance identifier index values identify the tmnxOamPingCtlEntry that a OAM probe result (tmnxOamMacPingHistoryEntry) belongs to. The tmnxOamMacPingHistoryIndex identifies a group of replies received in response to a specific probe transmission. The tmnxOamMacPingReplyIndex selects a single OAM macQuery reply. The tmnxOamMacPingL2MapIndex selects a single L2 mapping entry within a specific macQuery probe reply. The agent starts assigning tmnxOamMacPingL2MapIndex values at 1.

The value of tmnxOamMacPingL2MapRouterID is the router ID for this L2 mapping entry.

The value of tmnxOamMacPingL2MapLabel is the label used by the router for the L2FEC or VC ID specified by this L2 mapping entry.

The value of tmnxOamMacPingL2MapProtocol is the signaling protocol used by the router for the L2FEC or VC ID specified by this L2 mapping entry.

The value of tmnxOamMacPingL2MapVCType specifies the class of VC ID given in tmnxOamMacPingL2MapVCID.

The value of tmnxOamMacPingL2MapVCID is the VC ID associated with the label used by the L2FEC specified by this L2 mapping entry.

The value of tmnxOamMacPingL2MapDirection specifies the direction that this L2 mapping entry is in relation to the node that returned the macQuery reply.

Defines the Alcatel-Lucent SROS OAM LSP Ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM lspPing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamLspPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

The unique value which identifies this virtual router in the Alcatel-Lucent SROS system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router. This object was obsoleted in release 6.0R15 and replaced with tmnxOamPingCtlVRtrID in tmnxOamPingCtlTable.

Administrative name of the target Labeled Switch Path (LSP) for this OAM LSP Ping test. The LSP name must be unique within the virtual router instance specified by tmnxOamLspPingCtlVRtrID. This parameter is mutually exclusive with the IP prefix parameter associated with an LDP based LSP (tmnxOamLspPingCtlLdpIpPrefix). Either the LSP name or the LDP IP Prefix must be specified but not both.

Administrative name of the Labeled Switch Path (LSP) to use to return the response to this OAM LSP Ping test. The LSP name must be unique within the virtual router instance specified by tmnxOamLspPingCtlVRtrID. This is an optional parameter.

Specifies the outermost label time-to-live value. This is an optional parameter.

Administrative name of the Path (LSP) for this OAM LSP Ping test. The Path name must be unique within the virtual router instance specified by tmnxOamLspPingCtlVRtrID. This is an optional parameter which can be specified only if the LSP Name parameter is specified.

The IP prefix for the LDP based LSP for this OAM LSP Ping test. This parameter is mutually exclusive with the LSP name parameter (tmnxOamLspPingCtlLspName). Either the LDP IP Prefix or the LSP name must be specified but not both. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamLspPingCtlLdpPrefixType and tmnxOamLspPingCtlLdpPrefix.

The IP prefix length for the LDP based LSP for this OAM LSP Ping test. The value of this parameter is valid only when LDP IP Prefix has been specified. This object was obsoleted in release 4.0 and replaced with InetAddress object tmnxOamLspPingCtlLdpPrefixLen.

The value of tmnxOamLspPingCtlLdpPrefixType specifies the type of Internet address stored in tmnxOamLspPingCtlLdpPrefix.

The value of tmnxOamLspPingCtlLdpPrefix specifies the Internet prefix for the LDP based LSP for this OAM LSP Ping test. This parameter is mutually exclusive with the LSP name parameter (tmnxOamLspPingCtlLspName). Either the LDP IP Prefix or the LSP name must be specified but not both.

The value of tmnxOamLspPingCtlLdpPrefixLen specifies the Internet address prefix length for the LDP based LSP for this OAM LSP Ping test. The value of this parameter is valid only when LDP IP Prefix has been specified.

The value of tmnxOamLspPingCtlPathDestType specifies the type of Internet address stored in tmnxOamLspPingCtlPathDest.

The value of tmnxOamLspPingCtlPathDest specifies a unique path for this OAM LSP Ping to traverse. This address is used as part of a hash key to select the appropriate ECMP path to the destination of an OAM LSP Ping test. This is an optional parameter.

Administrative name of the next hop interface for this OAM LSP Ping test to be sent. The interface name must be unique within the virtual router instance specified by tmnxOamLspPingCtlVRtrID. This is an optional parameter which can be specified only if the tmnxOamLspPingCtlPathDest parameter is specified. This parameter is mutually exclusive with the tmnxOamLspPingCtlNhAddress parameter. Either the next-hop interface name or next-hop address can be specified but not both. An attempt to set this object to a non-default value when tmnxOamLspPingCtlNhAddress has a non-default value will result in an inconsistentValue error.

The value of tmnxOamLspPingCtlNhAddressType specifies the type of Internet address stored in tmnxOamLspPingCtlNhAddress.

The value of tmnxOamLspPingCtlNhAddress specifies the Interface address to the next hop in which this OAM LSP ping test will be transmitted. This is an optional parameter which can be specified only if the tmnxOamLspPingCtlPathDest parameter is specified. This parameter is mutually exclusive with tmnxOamLspPingCtlNhIntfName parameter. Either the next-hop interface name or next-hop address can be specified but not both. An attempt to set this object to a non-default value when tmnxOamLspPingCtlNhIntfName has a non-default value will result in an inconsistentValue error.

The value of tmnxOamLspPingCtlTestSubMode specifies the type of LSP ping test to perform. When this object is unspecified(1), the type of LSP ping test to be performed is determined when the test is started, from the set of tmnxOamLspPingCtlTable objects configured with non-default values. If there is a mismatch between tmnxOamLspPingCtlTestSubMode and the type of the LSP to be tested, the test will fail. For example, if tmnxOamLspPingCtlTestSubMode is static(2), and tmnxOamLspPingCtlLspName refers to an LSP with TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to mplsTp(7), the test will fail. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause.

The value of tmnxOamLspPingCtlMplsTpPathType specifies the type of the MPLS-TP path to be tested. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause.

The value of tmnxOamLspPingCtlMplsTpGlobalId specifies the target MPLS-TP Global Identifier to be used for the test. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause.

The value of tmnxOamLspPingCtlMplsTpNodeId specifies the target MPLS-TP Node Identifier to be used for the test. A value of zero indicates that no Node Identifier has been configured. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause.

The value of tmnxOamLspPingCtlAssocChannel specifies the launched echo requests usage of the Associated Channel (ACH) mechanism, when testing an MPLS-TP LSP. When tmnxOamLspPingCtlTestSubMode is static(2), the default value for tmnxOamLspPingCtlAssocChannel is nonIp(2). The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause.

The value of tmnxOamLspPingCtlForce specifies whether or not to force the transmission of the lspPing request PDU(s). If tmnxOamLspPingCtlForce is true(1), the test will proceed and request PDU(s) will be sent regardless of the local operational status of the tested LSP path. If tmnxOamLspPingCtlForce is false(2), the test will fail immediately when the local operational status of the tested LSP path is down. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause.

Defines the Alcatel-Lucent SROS OAM VPRN Ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM vprnPing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamTrProbeHistoryTable. There will be no entries for these test in the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamVprnPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

Specifies the Ipv4 address to be used as the source for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of vprnPing. This parameter is required. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamVprnPingCtlSrcAddrType and tmnxOamVprnPingCtlSrcAddress.

When the value of tmnxOamVprnPingCtlReplyControl is true, the OAM ping response is returned using the control plane. If its value is false, the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than vprnPing.

Specifies the vc-label time-to-live value. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than vprnPing. While performing the test with a ttl of 1 no responses should ever be expected.

The value of tmnxOamVprnPingCtlSrcAddrType specifies the Internet address type stored in tmnxOamVprnPingCtlSrcAddress.

The value of tmnxOamVprnPingCtlSrcAddress specifies the Internet address to be used as the source for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of vprnPing. This parameter is required.

Defines the Alcatel-Lucent SROS OAM ATM Ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM atmPing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamAtmPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamAtmPingCtlPortId is the ID of the access port of the target VC. This parameter is required.

The value of tmnxOamAtmPingCtlVpi is the VPI of the VC used to send the OAM ATM ping. This is a required parameter.

The value of tmnxOamAtmPingCtlVci is the VCI of the VC used to send the OAM ATM ping. This is a required parameter.

The value of tmnxOamAtmPingCtlLpbkLocation specifies the Loopback Location ID used in the ATM OAM loopback cell. If all bits in the Loopback Location ID are 1, the destination of the OAM ATM ping is the far-end destination of the VC. Otherwise the cell is destined to a specific ATM node in the ATM network. This is an optional parameter.

The value of tmnxOamAtmPingCtlSegment determines if the ATM OAM loopback cell is destined to the first segment going in the line direction or the PVCCs connection endpoint.

Defines the Alcatel-Lucent SROS OAM MFIB Ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM mfibPing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable. Rows are created in the tmnxOamMfibPingCtlTable only for those entries in the tmnxOamPingCtlTable where tmnxOamPingCtlTestMode has a value of mfibPing.

Defines an entry in the tmnxOamMfibPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

Specifies the Ipv4 address to be used as the source for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of mfibPing in which case this parameter is required. If tmnxOamPingCtlTestMode is different from mfibPing this field is ignored. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMfibPingCtlSrcAddrType and tmnxOamMfibPingCtlSrcAddress.

Specifies the Ipv4 multicast address to be used as the destination for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of mfibPing in which case this parameter is required. If tmnxOamPingCtlTestMode is different from mfibPing this field is ignored. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMfibPingCtlDestAddrType and tmnxOamMfibPingCtlDestAddress.

When the value of tmnxOamMfibPingCtlReplyControl is true, the OAM ping response is returned using the control plane. If its value is false, the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than mfibPing.

Specifies the vc-label time-to-live value. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than mfibPing. While performing the test with a ttl of 1 no responses should ever be expected.

The value of tmnxOamMfibPingCtlSrcAddrType specifies the Internet address type stored in tmnxOamMfibPingCtlSrcAddress.

The value of tmnxOamMfibPingCtlSrcAddress specifies the Internet address to be used as the source for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of mfibPing and the value of tmnxOamMfibPingCtlDestMacAddr is all zeros, in which case this parameter is required. If tmnxOamPingCtlTestMode is different from mfibPing this field is ignored.

The value of tmnxOamMfibPingCtlDestAddrType specifies the Internet multicast address type stored in tmnxOamMfibPingCtlDestAddress.

The value of tmnxOamMfibPingCtlDestAddress specifies the Internet multicast address to be used as the destination for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of mfibPing and the value of tmnxOamMfibPingCtlDestMacAddr is all zeros, in which case this parameter is required. If tmnxOamPingCtlTestMode is different from mfibPing this field is ignored.

The value of tmnxOamMfibPingCtlDestMacAddr specifies the IPv6 multicast MAC address to be used as the destination for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of mfibPing and objects tmnxOamMfibPingCtlSrcAddrType and tmnxOamMfibPingCtlDestAddrType have a value of unknown (0), in which case this parameter is required. If tmnxOamPingCtlTestMode is different from mfibPing this field is ignored.

Defines the Alcatel-Lucent SROS OAM CPE Ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM cpePing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable. Rows are created in the tmnxOamCpePingCtlTable only for those entries in the tmnxOamPingCtlTable where tmnxOamPingCtlTestMode has a value of cpePing.

Defines an entry in the tmnxOamCpePingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

Specifies the Ipv4 address to be used as the source for performing an CPE ping operation when tmnxOamPingCtlTestMode has a value of cpePing. This parameter is required for cpePing and ignored in all other cases. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamCpePingCtlSrcAddrType and tmnxOamCpePingCtlSrcAddress.

When the value of tmnxOamCpePingCtlSendControl is true, the OAM ping packet is sent via the control plane. If its value is false, the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than cpePing.

When the value of tmnxOamCpePingCtlReplyControl is true, the OAM ping response is returned using the control plane. If its value is false, the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than cpePing.

Specifies the vc-label time-to-live value. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than cpePing. When performing the test with a ttl=1, the cpe-ping is only done to the local SAP(s).

When set to a non zero value, the system will use the value as source mac address in the ARP request that will be sent to the CPE. If set to 0, the MAC address configured for the CPM is used. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than cpePing.

The value of tmnxOamCpePingCtlSrcAddrType specifies the Internet address type stored in tmnxOamCpePingCtlSrcAddress.

The value of tmnxOamCpePingCtlSrcAddress specifies the Internet address to be used as the source for performing a CPE ping operation when tmnxOamPingCtlTestMode has a value of cpePing. This parameter is required for cpePing and ignored in all other cases.

Defines the Alcatel-Lucent SROS OAM Multicast Router Information Response Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM mrinfo test operations. The results of these tests are stored in the tmnxOamPingResultsTable, the tmnxOamPingHistoryTable and the tmnxOamMRInfoRespTable.

Defines an entry in the tmnxOamMRInfoRespTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

tmnxOamMRInfoRespCapabilities indicates the capabilities of the router responding to the mrinfo request: leaf(0) This is a leaf router prune(1) This router understands pruning genid(2) This router sends Generation Ids mtrace(3) This router handles Mtrace requests snmp(4) This router supports the DVMRP MIB

tmnxOamMRInfoRespMinorVersion indicates the minor software version on the router responding to the mrinfo request.

tmnxOamMRInfoRespMajorVersion indicates the major software version on the router responding to the mrinfo request.

tmnxOamMRInfoRespNumInterfaces indicates the number of interfaces in the mrinfo response packet. These interfaces are listed in the tmnxOamMRInfoRespIfTable.

Defines the Alcatel-Lucent SROS OAM Multicast Router Information Interface Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM mrinfo test operation. The results of these tests are stored in the tmnxOamPingResultsTable, the tmnxOamPingHistoryTable and the tmnxOamMRInfoRespIfTable.

Defines an entry in the tmnxOamMRInfoRespIfTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

tmnxOamMRInfoRespIfIndex is the index into the tmnxOamMRInfoRespIfTable. The mrinfo response packet has the routers interfaces on which multicast is enabled. tmnxOamMRInfoRespIfIndex is used to identify those interfaces.

tmnxOamMRInfoRespIfAddress indicates the interface address on the router responding to the mrinfo request. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMRInfoRespIfAddrType and tmnxOamMRInfoRespIfAddr.

tmnxOamMRInfoRespIfMetric indicates the metric on the interface.

tmnxOamMRInfoRespIfThreshold indicates the threshold on the interface.

tmnxOamMRInfoRespIfFlags indicates the flags associated with an interface: tunnel(0) Neighbor reached via tunnel srcrt(1) Tunnel uses IP source routing reserved1(2) No longer used reserved2(3) No longer used down(4) Operational status down disabled(5) Administrative status down querier(6) Querier for interface leaf(7) No downstream neighbors on interface

tmnxOamMRInfoRespIfNbrCount indicates the number of multicast neighbors on the interface. The neighbors are listed in the tmnxOamMRInfoRespIfNbrTable.

tmnxOamMRInfoRespIfAddrType indicates the Internet address type stored in tmnxOamMRInfoRespIfAddr.

tmnxOamMRInfoRespIfAddr indicates the Internet address of the interface on the router responding to the mrinfo request.

Defines the Alcatel-Lucent SROS OAM Multicast Router Information Interface Neighbor Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM mrInfo test operation. This table contains entries for neighbors on an interface. The results of the mrinfo test are stored in the tmnxOamPingResultsTable, the tmnxOamPingHistoryTable, the tmnxOamMRInfoRespTable, the tmnxOamMRInfoRespIfTable and the tmnxOamMRInfoRespIfNbrTable.

Defines an entry in the tmnxOamMRInfoRespIfNbrTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

tmnxOamMRInfoRespIfNbrIndex is used to identify the multicast neighbor on the interface tmnxOamMRInfoRespIfIndex.

tmnxOamMRInfoRespIfNbrAddress indicates the address of the neighbor on the interface. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMRInfoRespIfNbrAddrType and tmnxOamMRInfoRespIfNbrAddr.

tmnxOamMRInfoRespIfNbrAddrType indicates the Internet address type stored in tmnxOamMRInfoRespIfNbrAddr.

tmnxOamMRInfoRespIfNbrAddr indicates the Internet address of the neighbor on the interface.

Defines the Alcatel-Lucent SROS OAM VCCV Ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM vccvPing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamVccvPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamVccvPingCtlSdpIdVcId specifies the SDP binding of the FEC 128 pseudowire to be used when performing a vccv-ping operation. A non-zero value is mandatory when testing a FEC 128 pseudowire. The all-zeros value indicates an unused SDP binding. If tmnxOamVccvPingCtlSdpIdVcId is set to a non-default value, the following objects must be default: tmnxOamVccvPingCtlSpokeSdpId, tmnxOamVccvPingCtlSaiiGlobalId, tmnxOamVccvPingCtlSaiiPrefix, tmnxOamVccvPingCtlSaiiAcId, tmnxOamVccvPingCtlTaiiGlobalId, tmnxOamVccvPingCtlTaiiPrefix, and tmnxOamVccvPingCtlTaiiAcId. If the value of tmnxOamVccvPingCtlSdpIdVcId is non-zero and invalid, or the pseudowire is administratively down, or unavailable, the OAM Echo request message probe is not sent and an appropriate error value is written to tmnxOamPingHistoryStatus for that probe entry. Once the interval timer expires, the next probe attempt will be made if required.

The value of tmnxOamVccvPingCtlReplyMode as specified in draft-ietf-mpls-lsp-ping-10.txt sets the method of reply due to the vccv-ping request message. ip(2) out-of-band reply controlChannel(4) inband reply This parameter is optional for vccv-ping.

The value of tmnxOamVccvPingCtlPwId specifies the pseudowire identifier to be used when performing a vccv-ping operation on a FEC 128 pseudowire. The pseudowire Id is a non-zero 32-bit connection ID required by FEC 128, as defined in RFC 4379. This object is only valid when used in conjunction with valid tmnxOamPingCtlTgtAddress and tmnxOamPingCtlSrcAddress. A value of zero indicates that no pseudowire Id has been configured.

The value of tmnxOamVccvPingCtlTtl specifies the time-to-live value for the vc-label of the echo request message. The outer label TTL is still set to the default of 255 regardless of this value.

The value of tmnxOamVccvPingCtlSpokeSdpId specifies the spoke SDP identifier to be used when performing a vccv-ping test on a FEC 129 pseudowire. This object is optional. At most one of tmnxOamVccvPingCtlSdpIdVcId and tmnxOamVccvPingCtlSpokeSdpId can be set to a non-default value on a particular row. A value of zero indicates that no spoke SDP identifier has been configured.

The value of tmnxOamVccvPingCtlSaiiGlobalId specifies the global identifier of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. tmnxOamVccvPingCtlSaiiGlobalId, tmnxOamVccvPingCtlSaiiPrefix, tmnxOamVccvPingCtlSaiiAcId, tmnxOamVccvPingCtlTaiiGlobalId, tmnxOamVccvPingCtlTaiiPrefix, and tmnxOamVccvPingCtlTaiiAcId can be used (together) to identify a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvPingCtlSdpIdVcId and tmnxOamVccvPingCtlSaiiGlobalId can be set to a non-default value on a particular row. A value of zero indicates that no global identifier has been configured.

The value of tmnxOamVccvPingCtlSaiiPrefix specifies the prefix of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvPingCtlSdpIdVcId and tmnxOamVccvPingCtlSaiiPrefix can be set to a non-default value on a particular row. A value of zero indicates that no prefix has been configured.

The value of tmnxOamVccvPingCtlSaiiAcId specifies the attachment circuit identifier of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvPingCtlSdpIdVcId and tmnxOamVccvPingCtlSaiiAcId can be set to a non-default value on a particular row. A value of zero indicates that no attachment circuit identifier has been configured.

The value of tmnxOamVccvPingCtlTaiiGlobalId specifies the global identifier of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvPingCtlSdpIdVcId and tmnxOamVccvPingCtlTaiiGlobalId can be set to a non-default value on a particular row. A value of zero indicates that no global identifier has been configured.

The value of tmnxOamVccvPingCtlTaiiPrefix specifies the prefix of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvPingCtlSdpIdVcId and tmnxOamVccvPingCtlTaiiPrefix can be set to a non-default value on a particular row. A value of zero indicates that no prefix has been configured.

The value of tmnxOamVccvPingCtlTaiiAcId specifies the attachment circuit identifier of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvPingCtlSdpIdVcId and tmnxOamVccvPingCtlTaiiAcId can be set to a non-default value on a particular row. A value of zero indicates that no attachment circuit identifier has been configured.

The value of tmnxOamVccvPingCtlMplsTpGlobalId specifies the target MPLS-TP Global Identifier to be used for the test. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause.

The value of tmnxOamVccvPingCtlMplsTpNodeId specifies the target MPLS-TP Node Identifier to be used for the test. A value of zero indicates that no Node Identifier has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause.

The value of tmnxOamVccvPingCtlTestSubMode specifies the type of VCCV ping test to perform. When this object is unspecified(1), the type of VCCV ping test to be performed is determined when the test is started, from the set of tmnxOamVccvPingCtlTable objects configured with non-default values. If there is a mismatch between tmnxOamVccvPingCtlTestSubMode and the type of the pseudowire to be tested, the test will fail. For example, if tmnxOamVccvPingCtlTestSubMode is static(2), and tmnxOamVccvPingCtlSdpIdVcId refers to an SDP binding with TIMETRA-SDP-MIB::sdpDelivery not equal to mplsTp(3), the test will fail. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause.

The value of tmnxOamVccvPingCtlAssocChannel specifies the launched echo requests usage of the Associated Channel (ACH) mechanism, when performing an MPLS-TP VCCV ping test. When tmnxOamVccvPingCtlTestSubMode is static(2), the default value for tmnxOamVccvPingCtlAssocChannel is nonIp(2). The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause.

Defines the Alcatel-Lucent SROS OAM ICMP Ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM icmpPing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamIcmpPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamIcmpPingCtlRapid specifies whether or not to send ICMP ping probes in rapid sequence. Changing tmnxOamIcmpPingCtlRapid from false to true implicitly sets tmnxOamPingCtlIntervalUnits to centiseconds(2). For example, if tmnxOamPingCtlInterval is 1, that makes the interval for the test 0.01 seconds. Changing tmnxOamIcmpPingCtlRapid from true to false implicitly sets tmnxOamPingCtlIntervalUnits to seconds(1). For example, if tmnxOamPingCtlInterval is 1, that makes the interval for the test 1 second.

The value of tmnxOamIcmpPingCtlTtl specifies the initial time-to-live value for the ICMP ping packets.

The value of tmnxOamIcmpPingCtlDSField specifies the value to load in the Type of Service (TOS) octet or the Traffic Class (TC) octet of the launched ICMP echo request(s). The TOS octet is a field in the IPv4 packet header. The TC octet is a field in the IPv6 packet header. The value in the TOS or TC octet may influence the route, latency, and/or probability of loss for the echo request (and, by inference, for the associated data flow). This object is optional.

The value of tmnxOamIcmpPingCtlPattern specifies a pattern to be repeated to fill the data field of the ICMP ping packet. When the value -1 is specified, the data field will be filled with positional values.

The value of tmnxOamIcmpPingCtlNhAddrType specifies the address type of the tmnxOamIcmpPingCtlNhAddress Internet address.

The value of tmnxOamIcmpPingCtlNhAddress specifies the Internet address of the next-hop. Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex, tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value. Otherwise, inconsistentValue is returned.

The value of tmnxOamIcmpPingCtlEgrIfIndex specifies the ifIndex of the interface to use to transmit the ICMP ping packets. If a non-zero value is Set, it must be a known ifIndex. The value stored is the corresponding interface name string. When tmnxOamIcmpPingCtlEgrIfIndex is read, the stored interface name string is converted to an ifIndex (zero, if the interface no longer exists), and the ifIndex is returned. When tmnxOamIcmpPingCtlEgrIfName is read, the stored interface name string is returned. If zero is Set, the empty string is stored in the interface name string. When tmnxOamIcmpPingCtlEgrIfIndex is read, zero is returned. When tmnxOamIcmpPingCtlEgrIfName is read, the empty string is returned. Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex, tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value. Otherwise, inconsistentValue is returned. Managers are encouraged to use tmnxOamIcmpPingCtlEgrIfName (instead of tmnxOamIcmpPingCtlEgrIfIndex) because tmnxOamIcmpPingCtlEgrIfIndex will be deleted in a future release.

The value of tmnxOamIcmpPingCtlBypassRouting specifies whether to send the ping request to a host on a directly attached network, bypassing the routing table. Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex, tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value. Otherwise, inconsistentValue is returned.

The value of tmnxOamIcmpPingCtlDoNotFragment specifies whether or not the DF (Dont Fragment) bit is set in the ICMP ping packet. When tmnxOamIcmpPingCtlDoNotFragment has the value false, the DF bit is not set.

The value of tmnxOamIcmpPingCtlEgrIfName specifies the name of the interface to use to transmit the ICMP ping packets. The value provided is accepted whether or not it is a known interface name (validation is done as part of executing the test). When tmnxOamIcmpPingCtlEgrIfName is Set, the given interface name string is stored. When tmnxOamIcmpPingCtlEgrIfName is read, the interface name string is returned. When tmnxOamIcmpPingCtlEgrIfIndex is read, the interface name string is converted to an ifIndex (zero if the interface name string is the empty string, or cannot be converted to an ifIndex), and the ifIndex is returned. Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex, tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value. Otherwise, inconsistentValue is returned.

Defines the Alcatel-Lucent SROS OAM ANCP Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM ANCP loopback test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamAncpTestHistoryTable. There will be no entries for these tests in the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamAncpTestCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

The object tmnxOamAncpTestTarget specifies how to interpret the value of the object tmnxOamAncpTestTargetId. If set to subscriberId, the object tmnxOamAncpTestTargetId is a printable character string which contains the subscriber-id. If set to ancpString, the object tmnxOamAncpTestTargetId is a printable character string which contains the ancp-string. If set to none, no value is specified, the object tmnxOamAncpTestTargetId is an empty string, and no ancp-loopback test can be performed.

The object tmnxOamAncpTestTargetId contains the ID of the subscriber for which the ANCP loopback test must be performed. The content of the field is interpreted as being a subscriber-id of max 32 chars (in case the object tmnxOamAncpTestTarget is set to subscriberId), or as being an acnp-string of max 63 chars (in case the object tmnxOamAncpTestTarget is set to ancpString).

The value of tmnxOamAncpTestcount specifies the number of messages the access node will use to test the circuit. If set to 0, the number of messages will be determined by the access node. Following settings are allowed: tmnxOamAncpTestcount tmnxOamAncpTestTimeout 0 0 1..32 0 1..32 1..255

The value of tmnxOamAncpTestTimeout specifies the number of seconds the controlling node will wait for a reply. This timeout value is also sent to the access node. If set to 0, the access node will pick a default value, while the control node will assume a value of 255 seconds. Following settings are allowed: tmnxOamAncpTestcount tmnxOamAncpTestTimeout 0 0 1..32 0 1..32 1..255

Defines a table for storing the results of an OAM ANCP test. The number of entries in this table for a test is limited to the results of 3 runs. An entry in this table is created when the result of an OAM ANCP test is determined. An entry is removed from this table when its corresponding tmnxOamPingCtlEntry is deleted.

Defines an entry in the tmnxOamAncpTestHistoryTable. The first two index elements identify the tmnxOamPingCtlEntry that a tmnxOamAncpTestHistoryTable belongs to. The third index identifies a specific run of the OAM test. The fourth index element selects a single OAM ANCP test result.

An entry in this table is created when the result of a OAM ANCP test is determined. The initial 2 instance identifier index values identify the tmnxOamPingCtlEntry that This ANCP test result belongs to. The tmnxOamAncpHistoryIndex element selects a single OAM probe result. The agent starts assigning tmnxOamAncpHistoryIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object.

The object tmnxOamAncpHistoryAncpString indicates the value of the ancp-string used while running this ANCP test.

The object tmnxOamAncpHistoryAccNodeCode indicates, if different from 0, the return code received from the ANCP access node. The value of this field corresponds to the errorcodes defined in the draft-wadhwa-gsmp-l2control-configuration-01: - 0x500 Specified access line does not exist - 0x501 Loopback test timed out - 0x502 Reserved - 0x503 DSL line status showtime - 0x504 DSL line status idle - 0x505 DSL line status silent - 0x506 DSL line status training - 0x507 DSL line integrity error - 0x508 DSLAM resource not available - 0x509 Invalid test parameter

The object tmnxOamAncpHistoryAccNodeResult indicates, if different from 0, the return result received from the ANCP access node. The value of this field corresponds to the result codes defined in the draft-wadhwa-gsmp-l2control-configuration-01: { - 1: NoSuccessAck - 2: AckAll - 3: Success - 4: Failure - 5: More - 6: ReturnReceipt }

The object tmnxOamAncpHistoryAccNodeRspStr indicates, if different from the empty string, the OAM-loopback-Test-Response-String received from the access node, as reply to the requested test.

Defines the Alcatel-Lucent SROS OAM P2MP LSP ping Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM p2mpLspPing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable. OAM p2mpLspPing test operation is based on IETF draft-ietf-mpls-p2mp-lsp-ping-06

Defines an entry in the tmnxOamP2mpLspPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamP2mpLspPingCtlLspName specifies the administrative name of the target RSVP P2MP Labeled Switch Path (LSP) for this OAM P2MP LSP Ping test. The LSP name must be unique within the base router instance. The objects tmnxOamP2mpLspPingCtlLspName and tmnxOamP2mpLspPingCtlP2MPId are mutually exclusive. An inconsistentValue error is returned when attempting to set the value of the tmnxOamP2mpLspPingCtlLspName object to a non default value while the value of the tmnxOamP2mpLspPingCtlP2MPId object is already set to non default value. An inconsistentValue error is returned when the value of tmnxOamPingCtlAdminStatus is set to enabled if both the value of tmnxOamP2mpLspPingCtlLspName and the value of tmnxOamP2mpLspPingCtlP2MPId objects are set to default values.

This parameter identifies an instance of a P2MP LSP, either a primary or secondary instance of a RSVP P2MP LSP Tree.

Specifies the outermost label time-to-live value. This is an optional parameter for RSVP P2MP LSP. This parameter is not applicable for LDP P2MP LSP

The value of tmnxOamP2mpLspPingCtlP2MPId specifies the identifier of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this OAM P2MP LSP ping test. The objects tmnxOamP2mpLspPingCtlP2MPId and tmnxOamP2mpLspPingCtlLspName are mutually exclusive. An inconsistentValue error is returned when attempting to set the value of the tmnxOamP2mpLspPingCtlP2MPId object to a non default value while the value of the tmnxOamP2mpLspPingCtlLspName object is already set to non default value. An inconsistentValue error is returned when the value of tmnxOamPingCtlAdminStatus is set to enabled if both the value of tmnxOamP2mpLspPingCtlP2MPId and the value of tmnxOamP2mpLspPingCtlLspName objects are set to default values.

The value of tmnxOamP2mpLspPingCtlSrcAddrType specifies the address type of tmnxOamP2mpLspPingCtlSrcAddr. When tmnxOamPingCtlAdminStatus is to set to enable, objects tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr, tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr should all have default values or should all have non-default values.

The value of tmnxOamP2mpLspPingCtlSrcAddr specifies the source address of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this OAM P2MP LSP ping test. This IP address must be valid unicast address. The objects tmnxOamP2mpLspPingCtlSrcAddr and tmnxOamP2mpLspPingCtlP2MPId are mutually exclusive. When tmnxOamPingCtlAdminStatus is to set to enable, objects tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr, tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr should all have default values or should all have non-default values.

The value of tmnxOamP2mpLspPingCtlGrpAddrType specifies the address type of tmnxOamP2mpLspPingCtlGrpAddr. When tmnxOamPingCtlAdminStatus is to set to enable, objects tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr, tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr should all have default values or should all have non-default values.

The value of tmnxOamP2mpLspPingCtlGrpAddr specifies the group address of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this OAM P2MP LSP ping test. This IP address must be valid multicast address. The objects tmnxOamP2mpLspPingCtlGrpAddr and tmnxOamP2mpLspPingCtlP2MPId are mutually exclusive. When tmnxOamPingCtlAdminStatus is to set to enable, objects tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr, tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr should all have default values or should all have non-default values.

Defines the Alcatel-Lucent SROS OAM P2MP LSP ping IP Address Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM p2mpLspPing test operations. This table provides the ability to add multiple IP Address destinations for the p2mpLspPing test. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamP2mpLspPingIPAddressTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests. The third and fourth index, tmnxOamP2mpLspPingCtlIpAddrType and tmnxOamP2mpLspPingCtlIpAddr enables the same management application to have multiple IP address destinations.

The object tmnxOamP2mpLspPingCtlIpAddrIndex specifies the numerical row-order in the table.

The object tmnxOamP2mpLspPingCtlIpRowStatus allows for the creation and deletion of rows in the tmnxOamP2mpLspPingIPAddressTable.

The value of tmnxOamP2mpLspPingCtlIpAddrType specifies the type of Internet address stored in tmnxOamP2mpLspPingCtlIpAddr.

The value of tmnxOamP2mpLspPingCtlIpAddr specifies a remote Internet address to send P2MP LSP Ping packets for a particular test.

tmnxOamEthCfmPingCtlTable contains Ethernet CFM-specific configuration information for ethCfmLoopback, ethCfmTwoWayDelay, and ethCfmTwoWaySlm tests. This table extends the tmnxOamPingCtlTable. A row is automatically created in this table when a row is created in tmnxOamPingCtlTable with tmnxOamPingCtlTestMode set to ethCfmLoopback, ethCfmTwoWayDelay, or ethCfmTwoWaySlm. Deleting a row in tmnxOamPingCtlTable automatically deletes the row (if any) with the same index values in tmnxOamEthCfmPingCtlTable. Test results are stored in tmnxOamPingResultsTable and tmnxOamPingHistoryTable.

tmnxOamEthCfmPingCtlEntry defines an entry in the tmnxOamEthCfmPingCtlTable. Each index is an object in tmnxOamPingCtlTable.

The value of tmnxOamEthCfmPingCtlTgtMacAddr specifies the target MAC address for the test.

The value of tmnxOamEthCfmPingCtlSrcMdIndex specifies the source CFM maintenance domain index for the test. Zero is the null CFM maintenance domain index.

The value of tmnxOamEthCfmPingCtlSrcMaIndex specifies the source CFM maintenance association index for the test. Zero is the null CFM maintenance association index.

The value of tmnxOamEthCfmPingCtlSrcMepId specifies the source Maintenance association End Point Identifier (MEP ID) for the test. Zero is the null MEP ID.

The maximum number of concurrent active trace route requests that are allowed within an agent implementation. A value of 0 for this object implies that there is no limit for the number of concurrent active requests in effect.

Defines the Alcatel-Lucent SROS OAM Trace Route Control Table for providing the capability of invoking OAM trace route tests from SNMP. The results of trace route operations can be stored in the tmnxOamTrResultsTable, tmnxOamTrProbeHistoryTable, and the tmnxOamTrHopsTable.

Defines an entry in the tmnxOamTrCtlTable. The first index element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows an management application to identify its entries. The second index, tmnxOamTrCtlTestIndex (also an SnmpAdminString), enables the same management application to have multiple requests outstanding.

To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an owner index. Such an initial index has a syntax of SnmpAdminString, and can thus be trivially mapped to a security name or group name as defined in VACM, in accordance with a security policy. When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given users entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the column subidentifier) up to the end of the encoded owner index. To configure VACM to permit access to this portion of the table, one would create vacmViewTreeFamilyTable entries with the value of vacmViewTreeFamilySubtree including the owner index portion, and vacmViewTreeFamilyMask wildcarding the column subidentifier. More elaborate configurations are possible.

The test name index of a Alcatel-Lucent SROS OAM Trace Route test. This is locally unique, within the scope of a tmnxOamTrCtlOwnerIndex.

This object allows entries to be created and deleted in the tmnxOamTrCtlTable. Deletion of an entry in this table results in all corresponding (same tmnxOamTrCtlOwnerIndex and tmnxOamTrCtlTestIndex index values) tmnxOamTrResultsTable, tmnxOamTrProbeHistoryTable, and tmnxOamTrHopsTable entries being deleted. The values for configuration objects required for the type of test specified in tmnxOamTrCtlTestMode MUST be specified prior to a transition to active(1) state being accepted. Activation of an Alcatel-Lucent SROS OAM Trace Route operation is controlled via tmnxOamTrCtlAdminStatus and not by transitioning of this objects value to active(1). Transitions in and out of active(1) state are not allowed while an entrys tmnxOamTrResultsOperStatus is active(1) with the exception that deletion of an entry in this table by setting its RowStatus object to destroy(6) will stop an active Alcatel-Lucent SROS OAM Trace Route operation. The operational state of an Alcatel-Lucent SROS OAM Trace Route operation can be determined by examination of the corresponding tmnxOamTrResultsOperStatus object.

The storage type for this conceptual row. Conceptual rows having the value permanent need not allow write-access to any columnar objects in the row.

The purpose of this object is to provide a descriptive name of the Alcatel-Lucent SROS OAM Trace Route test.

Specifies the type of Alcatel-Lucent SROS OAM Trace Route test defined by this entry. The configuration parameters unique to a specific test type are to be found in a sparsely dependent extension table for that test type. p2mpLspTrace is supported for non-SAA tests only. ethCfmLinkTrace is supported for SAA tests only. This is a required parameter.

Reflects the desired state that a tmnxOamTrCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this tmnxOamTrCtlEntry. disabled(2) - Deactivate the test as defined by this tmnxOamTrCtlEntry. If tmnxOamTrCtlSAA has the value true and tmnxOamSaaCtlAdminStatus has the value outOfService, an attempt to set this object to enabled will fail with an inconsistentValue error. Refer to the corresponding tmnxOamTrResultsOperStatus to determine the operational state of the test defined by this entry.

The value of tmnxOamTrCtlFcName specifies the forwarding class to be used when launching the probe(s). The forwarding class name must be present in the index column of TIMETRA-QOS-MIB::tFCNameTable. This object is optional. As shown in the following table a) this object is applicable to a subset of the test types, and b) the default forwarding class depends on the test type. tmnxOamTrCtlTestMode Applicable? Default -------------------- ----------- ------- ethCfmLinkTrace yes nc ldpTreeTrace yes be lspTraceRoute yes be macTraceRoute yes be p2mpLspTrace yes be vccvTraceRoute yes be vprnTraceRoute yes be otherwise no N/A For ethCfmLinkTrace, the forwarding class depends on whether the request is configured to egress on a network port or an access port. In the network port case, the forwarding class is the forwarding class of the pseudowire. In the access port case, the forwarding class is that of the SAPs egress encapsulation policy. For lspTraceRoute this is the forwarding class of the LSP tunnel. For macTraceRoute this is the forwarding class of the SDP encapsulation. For p2mpLspTrace this is the forwarding class of the P2MP LSP tree. If forwarding classes are mapped by the applicable QoS policy, the probe(s) may be launched using a different forwarding class than the forwarding class specified by this object.

The value of tmnxOamTrCtlProfile specifies the profile to be used with the forwarding class specified in tmnxOamTrCtlFcName. This object is optional. As shown in the following table a) this object is applicable to a subset of the test types, and b) the default profile value depends on the test type. tmnxOamTrCtlTestMode Applicable? Default -------------------- ----------- ------- ethCfmLinkTrace yes in(1) ldpTreeTrace yes out(2) lspTraceRoute yes out(2) macTraceRoute yes out(2) p2mpLspTrace yes out(2) vccvTraceRoute yes out(2) vprnTraceRoute yes out(2) otherwise no N/A

Specifies the Ipv4 address to be used as the destination for performing an OAM Trace Route operation. This parameter is not used by macTraceRoute or lspTraceRoute or mcastTraceRoute. This parameter is required by vprnTraceRoute. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamTrCtlTgtAddrType and tmnxOamTrCtlTgtAddress.

The value of tmnxOamTrCtlServiceId specifies the service ID of the service being tested. The applicability of tmnxOamTrCtlServiceId varies with the test type, as shown in the following table. tmnxOamTrCtlTestMode Applicability Related Virtual Router Object -------------------- ------------- ----------------------------- icmpTraceRoute optional tmnxOamTrCtlVRtrID macTraceRoute mandatory none mcastTraceRoute optional tmnxOamMcastTrCtlVRtrID vprnTraceRoute mandatory none otherwise not applicable none When tmnxOamTrCtlServiceId is mandatory, a non-zero value must be provided. When tmnxOamTrCtlServiceId is optional, it is used to specify a VPRN service. The test must use the VPRN services virtual router. When a related virtual router object is shown, the interaction is described in the DESCRIPTION clause of the listed object. Service IDs larger than 2147483647 are internal, so they are excluded from the range. The default value is the null service ID.

The value of tmnxOamTrCtlDataSize specifies the size of the data portion of the Trace Route request, in octets. The size of the message does not include the SDP encapsulation, VC-Label (if applied) or any DLC headers or trailers. This parameter is optional. When the OAM message is encapsulated in an IP/GRE SDP, the IP DF (Dont Fragment) bit is set. If any segment of the path between the sender and receiver cannot handle the message size, the message is discarded. MPLS LSPs are not expected to fragment the message either, as the message contained in the LSP is not an IP packet. When the data size is specified as 1, it is interpreted as the minumum valid data size for the trace type. The minimum data size (in octets) varies with tmnxOamTrCtlTestMode, as follows: lspTraceRoute with multipath DSMap 140 lspTraceRoute otherwise 104 macTraceRoute 1 p2mpLspTrace 132 vccvTraceRoute, FEC 128 pseudowire 88 vccvTraceRoute, FEC 129 pseudowire 120 vprnTraceRoute 1 This parameter is not used by ethCfmLinkTrace, icmpTraceRoute, ldpTreeTrace, or mcastTraceRoute.

Specifies the time-out value, in seconds, for an Alcatel-Lucent SROS OAM Trace Route request. This parameter is optional. For ethCfmLinkTrace, this is the time out for the whole test. The minimum, maximum, and default values of this object vary with tmnxOamTrCtlTestMode, as follows: icmpTraceRoute : N/A N/A N/A ethCfmLinkTrace: 1 10 5 otherwise : 1 60 3 If tmnxOamTrCtlTestMode is ethCfmLinkTrace, the value of tmnxOamTrCtlTimeOut must be less than or equal to the value of tmnxOamTrCtlInterval.

Specifies the number of times to reissue an Alcatel-Lucent SROS OAM Trace Route request with the same time-to-live (TTL) value. This parameter is optional. This parameter is not configurable for icmpTraceRoute; a default value of 3 is used.

The value of tmnxOamTrCtlMaxTtl specifies the maximum time-to-live value. This parameter is optional. When tmnxOamTrCtlMaxTtl is not explicitly specified, the agent defaults the value based on the tmnxOamTrCtlTestMode. In the case of lspTraceRoute the default is set to 30. In the case of icmpTraceRoute the default is set to 30. In the case of ldpTreeTrace the default is set to 30. In the case of vccvTraceRoute the default is set to 8. In the case of p2mplspTrace the default is set to 30. In the case of ethCfmLinkTrace the default is set to 64. Otherwise the default is set to 4.

The value of tmnxOamTrCtlInitialTtl specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path. This parameter is optional. This parameter is not configurable for icmpTraceRoute; the default value 1 is used. This parameter is not used with ethCfmLinkTrace.

The value of tmnxOamTrCtlDSField specifies the value to load in the Type of Service (TOS) octet or the Traffic Class (TC) octet of the launched ICMP echo request(s). The TOS octet is a field in the IPv4 packet header. The TC octet is a field in the IPv6 packet header. The value in the TOS or TC octet may influence the route, latency, and/or probability of loss for the echo request (and, by inference, for the associated data flow). This object is supported when tmnxOamTrCtlTestMode is icmpTraceRoute. Otherwise, it is ignored. This object is optional.

The value of tmnxOamTrCtlMaxFailures specifies the maximum number of consecutive timeouts allowed before terminating a trace route test. This object is optional. As shown in the following table a) this object is applicable to a subset of the test types, and b) the default value and upper bound depend on the test type. tmnxOamTrCtlTestMode Applicable? Default Upper Bound -------------------- ----------- ------- ----------- icmpTraceRoute yes 90 90 lspTraceRoute yes 5 255 p2mpLspTrace yes 5 10 vccvTraceRoute yes 5 255 otherwise no N/A N/A In the icmpTraceRoute case, changing the tmnxOamTrCtlMaxFailures value away from the default is not supported.

The value of tmnxOamTrCtlInterval specifies the number of seconds to wait before repeating an Alcatel-Lucent SROS OAM Trace Route test as defined by the value of the various objects in the corresponding row. This parameter is optional. The number of hops in a single Alcatel-Lucent SROS OAM Trace Route test is determined by the value of the corresponding tmnxOamTrCtlProbesPerHop object. After a single test completes, the number of seconds as defined by the value of tmnxOamTrCtlInterval MUST elapse before the next Alcatel-Lucent SROS OAM Trace Route test is started. The applicability, range, and default value of this object vary with tmnxOamTrCtlTestMode, as shown in the following table. tmnxOamTrCtlTestMode Min Max Default ethCfmLinkTrace 1 10 5 icmpTraceRoute not applicable vccvTraceRoute 1 255 1 otherwise 1 10 1

The value of tmnxOamTrCtlMaxRows specifies the maximum number of entries allowed in the tmnxOamTrProbeHistoryTable. The oldest entry in the tmnxOamTrProbeHistoryTable is removed to allow the addition of an new entry once the number of rows in the tmnxOamTrProbeHistoryTable reaches this value. Old entries are not removed when a new test is started. Entries are added to the tmnxOamTrProbeHistoryTable until tmnxOamTrCtlMaxRows is reached before entries begin to be removed. A value of 0 for this object disables creation of tmnxOamTrProbeHistoryTable entries. This object was obsoleted in release 6.0R17.

The value of tmnxOamTrCtlTrapGeneration specifies when and if to generate a notification for this entry: pathChange(0) - Generate a tmnxOamTrPathChange notification when the current path varies from a previously determined path. testFailure(1) - Generate a tmnxOamTrTestFailed notification when the full path to a target cant be determined. testCompletion(2) - Generate a tmnxOamTrTestCompleted notification when the test is completed.

The value of tmnxOamTrCtlCreateHopsEntries specifies whether or not the current path for an Alcatel-Lucent SROS OAM Trace Route test is kept in the tmnxOamTrHopsTable on a per hop basis. tmnxOamTrHopsTable provides a current path topology based on the results of the OAM Trace Route tests. If this feature is not supported tmnxOamTrCtlCreateHopsEntries will always be set to false(2) and any attempt to change its value to true(1) will be denied.

The value of tmnxOamTrCtlSAA specifies if this test is an SAA test (Service Assurance Agent; true), or an OAM test (false). If there is a tmnxOamSaaCtlTable row with the specified index values, true is returned. Otherwise, false is returned.

The value of tmnxOamTrCtlRuns indicates the number of times this OAM trace route test has been executed.

The value of tmnxOamTrCtlFailures indicates the number of times this OAM trace route test has failed.

The value of tmnxOamTrCtlLastRunResult indicates the completion status the last time this test was executed. If this OAM test is currently in progress, this object indicates the result of the previous test run, if any.

The value of tmnxOamTrCtlLastChanged indicates the time the value of a settable object in this row was last changed.

The value of tmnxOamTrCtlVRtrID specifies the virtual router to be used for the test. The value specified must be the index of an active row in TIMETRA-VRTR-MIB::vRtrConfTable. This object is applicable if tmnxOamTrCtlTestMode is icmpTraceRoute. When directing an icmpTraceRoute test to use a virtual router associated with a VPRN service, the virtual router can be specified using tmnxOamTrCtlVRtrID (with the VPRNs virtual router number) or tmnxOamTrCtlServiceId (with the VPRNs service number). tmnxOamTrCtlServiceId is preferred, because service numbers are constant across an SROS reboot (while virtual routers may be renumbered). If non-default values are specified for both tmnxOamTrCtlVRtrID and tmnxOamTrCtlServiceId, tmnxOamTrCtlServiceId is used. Setting this object is optional.

The value of tmnxOamTrCtlTgtAddrType specifies the type of host address to be used as the destination for performing a OAM Trace Route operation. Only ipv4, ipv6 and dns address types are supported. This object indicates the type of address stored in the corresponding tmnxOamTrCtlTgtAddress object. The dns address type is valid only for icmpTraceRoute.

The value of tmnxOamTrCtlTgtAddress specifies the IP host address to be used as the destination for performing an OAM Trace Route operation. The host address type is determined by the value of the corresponding tmnxOamTrCtlTgtAddrType object. This parameter is required by vprnTraceRoute and icmpTraceRoute. This parameter is not used by macTraceRoute, lspTraceRoute, mcastTraceRoute, vccvTraceRoute, p2mpLspPing, or ethCfmLinkTrace.

The value of tmnxOamTrCtlSrcAddrType specifies the type of host address to be used as the source for performing an OAM traceroute operation. This object indicates the type of address stored in the corresponding tmnxOamTrCtlSrcAddress object. Only ipv4 and ipv6 address types are supported. This object is valid only when the tmnxOamTrCtlTestMode has a value of icmpTraceRoute or lspTraceRoute.

The value of tmnxOamTrCtlSrcAddress specifies the IP host address to be used as the source for performing an OAM Trace Route operation. The host address type is determined by the value of the corresponding tmnxOamTrCtlSrcAddrType object. This is an optional parameter. This object is valid only when the tmnxOamTrCtlTestMode has a value of icmpTraceRoute or lspTraceRoute.

The value of tmnxOamTrCtlWaitMilliSec specifies the time in milliseconds to wait for a response before sending the next probe. This object is valid only for icmpTraceRoute tests.

Defines the Alcatel-Lucent SROS OAM Trace Route Test Results Table for keeping track of the status of a tmnxOamTrCtlEntry. An entry is added to the tmnxOamTrResultsTable when an tmnxOamTrCtlEntry is started by successful transition of its tmnxOamTrCtlAdminStatus object to enabled(1). An entry is removed from the tmnxOamTrResultsTable when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamTrResultsTable. The first two indexes of the tmnxOamTrResultsTable are the same as the tmnxOamTrCtlTable in order for a tmnxOamTrResultsEntry to correspond to the tmnxOamTrCtlEntry that caused it to be created. The third index allows a history of test runs to be stored.

Reflects the operational state of a tmnxOamTrCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped.

Reflects the current TTL value (range from 0 to 255) for an Alcatel-Lucent SROS OAM Trace Route operation. Maximum TTL value is determined by tmnxOamTrCtlMaxTtl. Zero is returned only in the case of an aborted ethCfmLinkTrace test.

Reflects the current probe count (1..10) for an Alcatel-Lucent SROS OAM Trace Route operation. The maximum probe count is determined by tmnxOamTrCtlProbesPerHop.

This objects reports the IP address associated with a tmnxOamTrCtlTargetIpAddress value when the destination address is specified as a DNS name. The value of this object should be a zero length octet string when a DNS name is not specified or when a specified DNS name fails to resolve. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamTrResultsTgtAddrType and tmnxOamTrResultsTgtAddress.

The current number of attempts to determine a path to a target. The value of this object MUST be started at 0. This object was made obsolete in the 3.0 release. Originally this table was used to report a summary of the results of all traceroute test for the configured test. An additional index, tmnxOamTrResultsTestRunIndex, has been added to this table and a row in this table now represents the results of a single traceroute test run. The new object tmnxOamTrCtlRuns in the tmnxOamTrCtlTable indicates the number of times this traceroute test has been run.

The current number of attempts to determine a path to a target that have succeeded. The value of this object MUST be reported as 0 when no attempts have succeeded. This object was made obsolete in the 3.0 release. Originally this table was used to report a summary of the results of all traceroute test for the configured test. An additional index, tmnxOamTrResultsTestRunIndex, has been added to this table and a row in this table now represents the results of a single traceroute test run. The new object tmnxOamTrCtlFailures in the tmnxOamTrCtlTable indicates the number of times an attempt to run this traceroute test has failed. The number of successful runs can be calclated as (tmnxOamTrCtlRuns - tmnxOamTrCtlFailures).

The date and time when the last complete path was determined.

The value of tmnxOamTrResultsTestRunIndex identifies the row entry that reports results for a single OAM trace route test run. The agent starts assigning tmnxOamTrResultsTestRunIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object.

The value of tmnxOamTrResultsTgtAddrType indicates the Internet address type stored in tmnxOamTrResultsTgtAddress.

The value of tmnxOamTrResultsTgtAddress indicates the Internet address associated with a tmnxOamTrCtlTgtAddress value when the destination address is specified as a DNS name. The value of this object should be a zero length octet string when a DNS name is not specified or when a specified DNS name fails to resolve.

The object contains the overall state of the trace test.

tmnxOamTrProbeHistoryTable contains per-probe results for trace route tests. The number of rows in this table for a test is limited to the results of 3 runs. This table is not used for tests which have tmnxOamTrCtlTestMode set to ldpTreeTrace.

A tmnxOamTrProbeHistoryEntry is created by the system when the result of a trace route probe launch is determined. A tmnxOamTrProbeHistoryEntry is destroyed when the corresponding tmnxOamTrCtlEntry is destroyed. The first two indices identify the parent tmnxOamTrCtlEntry. The third index identifies a trace route test run. Each subsequent index is described in its DESCRIPTION clause, below.

The value of tmnxOamTrProbeHistoryIndex specifies the entries belonging to a single OAM Trace Route test instance. The tmnxOamTrProbeHistoryIndex values are assigned starting at 1 and wrap on exceeding the upper bound.

Indicates which hop in an Alcatel-Lucent SROS OAM Trace Route path that the probes results are for. The value of this object is initially determined by the value of tmnxOamTrCtlInitialTtl.

Indicates the index of a probe for a particular hop in an Alcatel-Lucent SROS OAM Trace Route path. The number of probes per hop is determined by the value of the corresponding tmnxOamTrCtlProbesPerHop object.

The IP address of a hop in an Alcatel-Lucent SROS OAM Trace Route path. The value of tmnxOamTrProbeHistoryIpAddr specifies the Ipv4 address of the remote node that generated this reply to a OAM Trace Route probe. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamTrProbeHistoryAddrType and tmnxOamTrProbeHistoryAddress.

The amount of time measured in microseconds from when a probe was sent to when its response was received, two-way time, or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.

The amount of time measured in microseconds from when a OAM probe was sent to when it was received by the replier, out-bound one-way time. The value of this object is reported as 0 when it is not possible to transmit an OAM probe or the information is not available.

The result of an Alcatel-Lucent SROS OAM Trace Route operation made by a remote node to a particular probe.

The last implementation method specific reply code received. The Alcatel-Lucent SROS OAM Trace Route is usually implemented by transmitting a series of probe packets with increasing time-to-live values. A probe packet is a UDP datagram encapsulated into an IP packet. Each hop in a path to the target (destination) host rejects the probe packets (probes TTL too small, ICMP reply) until either the maximum TTL is exceeded or the target host is received. For icmpTraceRoute, both icmp packet type and code are included.

Timestamp for when this probe results were determined.

The value of tmnxOamTrProbeHistoryResponsePlane indicates the type of response plane this trace route response was received on.

The value of tmnxOamTrProbeHistoryAddressType indicates the type of binding address information returned in response to a test. When the test has the tmnxOamTrCtlTestMode value ethCfmLinkTrace, unknown is returned. For macTraceRoute, three types of address are applicable - sapId, localCpu, and sdpId. Address type of sdpId is a special case used specifically to indicate that the probe was traversing a b-vpls node in a PBB network (but where destination MAC is not necessarily known to the b-vpls node).

The value of tmnxOamTrProbeHistorySapId is the name of the access port of the SAP supporting the requested IP address returned in response to a vprnTraceRoute probe. If the value of tmnxOamTrProbeHistoryAddressType is not sapId, this object is not relevant and MUST have a null string .

The value of tmnxOamTrProbeHistoryVersion indicates the protocol version for this OAM ping reply.

The value tmnxOamTrProbeHistoryRouterID indicates the downstream router ID of the node that provided this ping reply. This object is valid only when tmnxOamTrCtlTestMode has a value of lspTraceRoute.

The value of tmnxOamTrProbeHistoryIfIndex indicates for a lspTraceRoute or vccvTraceRoute probe the ifIndex value of the interface that this probe was transmitted from. For other types of probes, this value is not significant and zero is returned.

The value of tmnxOamTrProbeHistoryDataLen indicates the UDP data length of the echo reply. A valid value is returned when the test has a tmnxOamTrCtlTestMode value of icmpTraceRoute, lspTraceRoute, p2mpLspTrace, or vccvTraceRoute. Otherwise, this value is not significant and zero is returned.

The value of tmnxOamTrProbeHistorySize indicates the size in octets of the user payload in the probe request packet. It does not include the service encapsulation.

The amount of time measured in microseconds from when a OAM probe reply was sent to when it was received, in-bound one-way time. The value of this object is reported as 0 when the information is not available.

The value of tmnxOamTrProbeHistoryAddrType indicates the Internet address type stored in tmnxOamTrProbeHistoryAddress.

The value of tmnxOamTrProbeHistoryAddress indicates the Internet address of a hop in an Alcatel-Lucent SROS OAM Trace Route path.

The value of tmnxOamTrProbeHistorySrcGlobalId indicates the source MPLS-TP global identifier of the replying node. The value is copied from the replys RFC 6426 Source Identifier TLV. If the TLV is absent, zero is returned. This value is relevant when tmnxOamTrCtlTestMode is lspTraceRoute or vccvTraceRoute. Otherwise, zero is returned.

The value of tmnxOamTrProbeHistorySrcNodeId indicates the source MPLS-TP node identifier of the replying node. The value is copied from the replys RFC 6426 Source Identifier TLV. If the TLV is absent, zero is returned. This value is relevant when tmnxOamTrCtlTestMode is lspTraceRoute or vccvTraceRoute. Otherwise, zero is returned.

Defines the Alcatel-Lucent SROS OAM Trace Route Hop Table for keeping track of the results of an Alcatel-Lucent SROS OAM Trace Route test on a per hop basis.

Defines an entry in the tmnxOamTrHopsTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamTrHopsEntry belongs to. The third index element identifies a OAM trace route test run. The fourth index element, tmnxOamTrHopsHopIndex, selects a hop in an Alcatel-Lucent SROS OAM Trace Route path.

Specifies the hop index for an Alcatel-Lucent SROS OAM Trace Route hop. Values for this object with respect to the same tmnxOamTrCtlOwnerIndex and tmnxOamTrCtlTestIndex MUST start at 1 and increase monotonically. The tmnxOamTrHopsTable keeps the current Alcatel-Lucent SROS OAM Trace Route path per tmnxOamTrCtlEntry. All hops (tmnxOamTrHopsTable entries) in an Alcatel-Lucent SROS OAM Trace Route path MUST be updated at the same time when an Alcatel-Lucent SROS OAM Trace Route operation completes. Care needs to be applied when either a path changes or cant be determined. The initial portion of the path, up to the first hop change, MUST retain the same tmnxOamTrHopsHopIndex values. The remaining portion of the path SHOULD be assigned new tmnxOamTrHopsHopIndex values.

This object reports the IP address associated with the hop. A value for this object should be reported as a numeric IP address and not as a DNS name. This value of this object is not significant when tmnxOamTrCtlTestMode has a value of macTraceRoute. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamTrHopsTgtAddrType and tmnxOamTrHopsTgtAddrType.

The minimum Alcatel-Lucent SROS OAM Trace Route round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received.

The maximum Alcatel-Lucent SROS OAM Trace Route round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received.

The current average Alcatel-Lucent SROS OAM Trace Route round-trip-time (RTT) for this hop.

The value of tmnxOamTrHopsRttSumOfSquares indicates the least significant 32 bits of tmnxOamTrHopsRttHCSumSquares.

The minimum Alcatel-Lucent SROS OAM Trace Route outbound one-way trip time received for this hop. A value of 0 for this object implies that no one-way trip time has been received.

The maximum Alcatel-Lucent SROS OAM Trace Route outbound one-way trip time received for this hop. A value of 0 for this object implies that no one-way trip time has been received.

The current average Alcatel-Lucent SROS OAM Trace Route outbound one-way trip time for this hop.

The value of tmnxOamTrHopsTtSumOfSquares indicates the least significant 32 bits of tmnxOamTrHopsTtHCSumSquares.

The value of this object reflects the number of probes sent for this hop during this Alcatel-Lucent SROS OAM Trace Route test. The value of this object should start at 0.

Number of responses received for this hop during this Alcatel-Lucent SROS OAM Trace Route test. This value of this object should start at 0.

Date and time when the last response was received for a probe for this hop during this Alcatel-Lucent SROS OAM Trace Route test.

The minimum OAM trace route inbound one-way trip time received. A value of 0 for this object implies that no one-way trip time measurement is available.

The maximum OAM trace route inbound one-way trip time received. A value of 0 for this object implies that no one-way trip time measurement is available.

The current average OAM inbound inbound one-way trip time. A value of 0 for this object implies that no one-way trip time measurement is available.

The value of tmnxOamTrHopsInTtSumOfSqrs indicates the least significant 32 bits of tmnxOamTrHopsInTtHCSumSqrs.

The value of tmnxOamTrHopsOutJitter indicates the amount of outbound one-way trip jitter, expressed in microseconds, for a trace route probe request packet sent for this OAM test. A value of 0 for this object implies that no one-way trip jitter measurement is available.

The value of tmnxOamTrHopsInJitter indicates the amount of inbound one-way trip jitter, expressed in microseconds, for a trace route probe response packet received for this OAM test. A value of 0 for this object implies that no one-way trip jitter measurement is available.

The value of tmnxOamTrHopsRtJitter indicates the amount of two-way trip jitter, expressed in microseconds, for a trace route probe sent for this OAM test. A value of 0 for this object implies that no two-way-trip jitter measurement is available.

The value of tmnxOamTrHopsProbeTimeouts indicates the number of probes that timed out without receiving a response.

The value of tmnxOamTrHopsProbeFailures indicates the total number of probes that failed to be transmitted plus the number of probes that timed out without receiving a response.

The value of tmnxOamTrHopsTgtAddrType indicates the Internet address type stored in tmnxOamTrHopsTgtAddress.

The value of tmnxOamTrHopsTgtAddress indicates the Internet address associated with the hop. A value for this object should be reported as a numeric IP address and not as a DNS name. This value of this object is not significant when tmnxOamTrCtlTestMode has a value of macTraceRoute or ethCfmLinkTrace.

The value of tmnxOamTrHopsRttOFSumSquares indicates the number of times tmnxOamTrHopsRttSumOfSquares overflowed.

The value of tmnxOamTrHopsRttHCSumSquares indicates the sum of squares of the round trip times of the trace route test for this hop. Its purpose is to enable the standard deviation calculation. The value of this object will be reported as 0 when one or more of the following conditions apply: 1. No round trip time measurement is available. 2. The test stopped before completion. 3. The test type (i.e. tmnxOamTrCtlTestMode) is one of the following: ldpTreeTrace, mcastTraceRoute, p2mpLspTrace.

The value of tmnxOamTrHopsTtOFSumSquares indicates the number of times tmnxOamTrHopsTtSumOfSquares overflowed.

The value of tmnxOamTrHopsTtHCSumSquares indicates the sum of squares of the outbound one-way trip times of the trace route test for this hop. Its purpose is to enable the standard deviation calculation. The value of this object will be reported as 0 when one or more of the following conditions apply: 1. No outbound one-way trip time measurement is available. 2. The test stopped before completion. 3. The test type (i.e. tmnxOamTrCtlTestMode) is one of the following: ldpTreeTrace, mcastTraceRoute, p2mpLspTrace.

The value of tmnxOamTrHopsInTtOFSumSqrs indicates the number of times tmnxOamTrHopsInTtSumOfSqrs overflowed.

The value of tmnxOamTrHopsInTtHCSumSqrs indicates the sum of squares of the inbound one-way trip times of the trace route test for this hop. Its purpose is to enable the standard deviation calculation. The value of this object will be reported as 0 when one or more of the following conditions apply: 1. No inbound one-way trip time measurement is available. 2. The test stopped before completion. 3. The test type (i.e. tmnxOamTrCtlTestMode) is one of the following: ldpTreeTrace, mcastTraceRoute, p2mpLspTrace.

Defines the Alcatel-Lucent SROS OAM MAC Trace Route Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM macTraceRoute test operations. The results of these tests are stored in the tmnxOamTrResultsTable, tmnxOamTrProbeHistoryTable and the tmnxOamMacTrL2MapTable.

Defines an entry in the tmnxOamMacTrCtlTable. The first index element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamTrCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamMacTrCtlTargetMacAddr is a 6-octet value that specifies the target MAC address to be used in the query request for performing an OAM Mac Trace Route operation when tmnxOamTrCtlTestMode has a value of macTraceRoute.

The value of tmnxOamMacTrCtlSourceMacAddr is a 6-octet value that specifies the MAC address to be used as the source in the query request for performing an OAM MAC Trace Route operation when tmnxOamTrCtlTestMode has a value of macTraceRoute.

When the value of tmnxOamMacTrCtlSendControl is true, the OAM MAC Trace Route packet is sent directly to the destination IP address via the control plane. If its value is false, the packet is sent via the data plane.

When the value of tmnxOamMacTrCtlReplyControl is true, the OAM Mac Trace Route response is returned using the control plane. If its value is false, the packet is sent via the data plane.

Defines a table for storing the results of an OAM macTraceRoute probe operation when a L2 Mapping TLV was returned. Each row represents a single L2FEC TLV within the L2 Mapping TLV. A single L2 mapping entry is returned if the macTraceRoute replier knows the requested VPN ID and has a binding for the requested MAC address. Multiple downstream L2 mappings that specify the repliers flooding domain may be returned if the replier has no bindings for the MAC address. An entry in this table is created when the result of an OAM macTraceRoute probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamMacTrL2MapTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamMacTrL2MapEntry belongs to. The third index element identifies a particular OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Alcatel-Lucent SROS OAM Trace Route operation. Note that in the case of a successful macTraceRoute reply there will be only one row entry created. However there may also be one or more error replies. The seventh index selects a single L2 mapping entry within a specific probe reply.

The tmnxOamMacTrL2MapIndex selects a single L2 mapping entry within a specific macTraceRoute probe reply. The agent starts assigning tmnxOamMacTrL2MapIndex values at 1.

The value of tmnxOamMacTrL2MapRouterID is the router ID for this L2 mapping entry.

The value of tmnxOamMacTrL2MapLabel is the label used by the router for the L2FEC or VC ID specified by this L2 mapping entry.

The value of tmnxOamMacTrL2MapProtocol is the signaling protocol used by the router for the L2FEC or VC ID specified by this L2 mapping entry.

The value of tmnxOamMacTrL2MapVCType specifies the class of VC ID given in tmnxOamMacTrL2MapVCID.

The value of tmnxOamMacTrL2MapVCID is the VC ID associated with the label used by the L2FEC specified by this L2 mapping entry.

The value of tmnxOamMacTrL2MapDirection specifies the direction that this L2 mapping entry is in relation to the node that returned the macTraceRoute reply.

The value of tmnxOamMacTrL2MapSdpId specifies the ID of the SDP supporting the L2 mapping entry that returned the reply. If this mapping is not a SDP, this object is not relevant and MUST return a value of 0.

The value of tmnxOamMacTrL2MapSapName specifies the SAP name when the downstream of the responder is a SAP. If the downstream responder is not a SAP, this object is not relevant and MUST return a zero length empty string.

Defines the Alcatel-Lucent SROS OAM LSP Trace Route Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM lspTraceRoute test operations. The results of these tests are stored in the tmnxOamTrResultsTable and the tmnxOamTrProbeHistoryTable.

Defines an entry in the tmnxOamLspTrCtlTable. The first index element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamTrCtlTestIndex, enables the same management application to have multiple outstanding requests.

The unique value which identifies this virtual router in the Alcatel-Lucent SROS system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the base transport router. This object was obsoleted in release 6.0R15 and replaced with tmnxOamTrCtlVRtrID in tmnxOamTrCtlTable.

Administrative name of the target Labeled Switch Path (LSP) for this OAM LSP Trace Route test. The LSP name must be unique within the virtual router instance specified by tmnxOamLspTrCtlVRtrID. This parameter is mutually exclusive with the IP prefix parameter associated with an LDP based LSP (tmnxOamLspTrCtlLdpIpPrefix). Either the LSP name or the LDP IP Prefix must be specified but not both.

Administrative name of the Path (LSP) for this OAM LSP Trace Route test. The Path name must be unique within the virtual router instance specified by tmnxOamLspTrCtlVRtrID. This is an optional parameter which can be specified only if the LSP Name parameter is specified.

The IP prefix for the LDP based LSP for this OAM LSP Trace Route test. This parameter is mutually exclusive with the LSP name parameter (tmnxOamLspTrCtlLspName). Either the LDP IP Prefix or the LSP name must be specified but not both. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamLspTrCtlLdpPrefixType and tmnxOamLspTrCtlLdpPrefix.

The IP prefix length for the LDP based LSP for this OAM LSP Trace Route test. The value of this parameter is valid only when LDP IP Prefix has been specified. This object was obsoleted in release 4.0 and replaced with InetAddress object tmnxOamLspTrCtlLdpPrefixLen.

The value of tmnxOamLspTrCtlLdpPrefixType specifies the type of Internet address stored in tmnxOamLspTrCtlLdpPrefix.

The value of tmnxOamLspTrCtlLdpPrefix specifies the Internet address prefix for the LDP based LSP for this OAM LSP Trace Route test. This parameter is mutually exclusive with the LSP name parameter (tmnxOamLspTrCtlLspName). Either the LDP IP Prefix or the LSP name must be specified but not both.

The value of tmnxOamLspTrCtlLdpPrefixLen specifies the Internet address prefix length for the LDP based LSP for this OAM LSP Trace Route test. The value of this parameter is valid only when LDP IP Prefix has been specified.

The value of tmnxOamLspTrCtlPathDestType specifies the type of Internet address stored in tmnxOamLspTrCtlPathDest.

The value of tmnxOamLspTrCtlPathDest specifies a unique path in a multipath setup for this OAM LSP Trace Route to traverse. This address is used as part of a hash key to select the appropriate ECMP to the destination of an OAM LSP Trace test. This is an optional parameter.

Administrative name of the next hop interface for this OAM LSP Trace Route test to be sent. The interface name must be unique within the virtual router instance specified by tmnxOamLspTrCtlVRtrID. This is an optional parameter which can be specified only if the tmnxOamLspTrCtlPathDest parameter is specified. This parameter is mutually exclusive with the tmnxOamLspTrCtlNhAddress parameter. Either the next-hop interface name or next-hop address can be specified but not both. An attempt to set this object to a non-default value when tmnxOamLspTrCtlNhAddress has a non-default value will result in an inconsistentValue error.

The value of tmnxOamLspTrCtlNhAddressType specifies the type of Internet address stored in tmnxOamLspTrCtlNhAddress.

The value of tmnxOamLspTrCtlNhAddress specifies the Interface address to the next hop through which this OAM LSP Trace Route test is to be transmitted. This is an optional parameter which can be specified only if the tmnxOamLspTrCtlPathDest parameter is specified. This parameter is mutually exclusive with tmnxOamLspTrCtlNhIntfName parameter. Either the next-hop interface name or next-hop address can be specified but not both. An attempt to set this object to a non-default value when tmnxOamLspTrCtlNhIntfName has a non-default value will result in an inconsistentValue error.

The value of tmnxOamLspTrCtlDownstreamMapTlv specifies the type of downstream mapping TLV to insert in the MPLS echo request PDU when launching the test. When an LSP trace route test is created, the value of this object defaults to the value of the global configuration object tmnxOamMplsEchoDownstreamMapTlv. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause.

The value of tmnxOamLspTrCtlTestSubMode specifies the type of LSP trace route test to perform. When this object is unspecified(1), the type of LSP trace route test to be performed is determined when the test is started, from the set of tmnxOamLspTrCtlTable objects configured with non-default values. If there is a mismatch between tmnxOamLspTrCtlTestSubMode and the type of the LSP to be tested, the test will fail. For example, if tmnxOamLspTrCtlTestSubMode is static(2), and tmnxOamLspTrCtlLspName refers to an LSP with TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to mplsTp(7), the test will fail. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause.

The value of tmnxOamLspTrCtlMplsTpPathType specifies the type of the MPLS-TP path to be tested. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause.

The value of tmnxOamLspTrCtlAssocChannel specifies the launched echo requests usage of the Associated Channel (ACH) mechanism, when testing an MPLS-TP LSP. When tmnxOamLspTrCtlTestSubMode is static(2), the default value for tmnxOamLspTrCtlAssocChannel is nonIp(2). The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause.

The value of tmnxOamLspTrCtlForce specifies whether or not to force the transmission of the lspTraceRoute request PDU(s). If tmnxOamLspTrCtlForce is true(1), the test will proceed and request PDU(s) will be sent regardless of the local operational status of the tested LSP path. If tmnxOamLspTrCtlForce is false(2), the test will fail immediately when the local operational status of the tested LSP path is down. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause.

Defines a table for storing the results of an OAM lspTraceRoute probe operation when a Downstream Mapping TLV was returned. Each row represents a single label map within the returned downstream mapping TLV. An entry in this table is created when the result of an OAM lspTraceRoute or p2mpLspTrace probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamLspTrMapTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamLspTrMapEntry belongs to. The third index element identifies an OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Alcatel-Lucent SROS OAM Trace Route operation. The seventh index selects a single downstream L2 map entry within the specific probe reply.

An entry in this table is created when the result of a OAM lspTraceRoute probe is determined. The initial 2 instance identifier index values identify the tmnxOamTrCtlEntry that a OAM probe result (tmnxOamTrProbeHistoryEntry) belongs to. The tmnxOamTrProbeHistoryIndex identifies a group of replies received in response to a specific probe transmission. The fourth and fifth indexes select the hop and the probe at that hop for a particular Alcatel-Lucent SROS OAM Trace Route operation. The tmnxOamLspTrMapIndex selects a single L2 mapping entry within a specific lspTraceRoute probe reply. The agent starts assigning tmnxOamLspTrMapIndex values at 1.

The value of tmnxOamLspTrMapDSIPv4Addr indicates the IPv4 address of the downstream LSR that this entry in the tmnxOamLspTrMapTable describes. If the interface to the downstream LSR is numbered, then the tmnxOamLspTrMapDSIPv4Addr can either be the downstream LSRs Router ID or the interface address of the downstream LSR. If the interface to the downstream LSR is unnumbered, the value of tmnxOamLspTrMapDSIPv4Addr indicates the downstream LSRs Router ID.

The value of tmnxOamLspTrMapAddrType indicates the type of downstream interface address specified by tmnxOamLspTrMapDSIfAddr. The only valid values for tmnxOamLspTrMapAddrType are ipv4Address, ipv4Unnumbered, ipv6Address and ipv6Unnumbered.

When tmnxOamLspTrMapAddrType has a value of ipv4Address tmnxOamLspTrMapDSIfAddr indicates the downstream LSRs interface address. When tmnxOamLspTrMapAddrType has a value of unnumbered, tmnxOamLspTrMapDSIfAddr indicates the index assigned by the upstream LSR to the interface.

The value of tmnxOamLspTrMapMTU indicates the largest MPLS frame (including the label stack) that fits on the interface to the downstream LSR.

The value of tmnxOamLspTrMapDSIndex indicates the unique index assigned to the pair of downstream router and interface addresses represented by this row in the tmnxOamLspTrMapTable. tmnxOamLspTrMapDSIndex object was obsolete in release 5.0

Defines the Alcatel-Lucent SROS OAM VPRN Trace Route Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM vprnTraceRoute test operations. The results of these tests are stored in the tmnxOamTrResultsTable, the tmnxOamTrProbeHistoryTable, the tmnxOamVprnTrRTTable and the tmnxOamVprnTrNextHopTable.

Defines an entry in the tmnxOamVprnTrCtlTable. The first index element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamTrCtlTestIndex, enables the same management application to have multiple outstanding requests.

Specifies the Ipv4 address to be used as the source for performing an OAM vprnTraceRoute operation when tmnxOamTrCtlTestMode has a value of vprnTraceRoute. This parameter is required. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamVprnTrCtlSrcAddrType and tmnxOamVprnTrCtlSrcAddress.

When the value of tmnxOamVprnTrCtlReplyControl is true, the OAM vprnTraceRoute response is returned using the control plane. If its value is false, the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamTrCtlTestMode has a value other than vprnTraceRoute.

The value of tmnxOamVprnTrCtlSrcAddrType specifies the type of Internet address stored in tmnxOamVprnTrCtlSrcAddress.

The value of tmnxOamVprnTrCtlSrcAddress specifies the Internet address to be used as the source for performing an OAM vprnTraceRoute operation when tmnxOamTrCtlTestMode has a value of vprnTraceRoute. This parameter is required.

Defines a table for storing the results of an OAM vprnTraceRoute probe operation. The number of entries for a test in this table is limited to the results of 3 runs. An entry in this table is created when the result of an OAM vprnTraceRoute probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamVprnTrL3MapTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamVprnTrL3MapEntry belongs to. The third index element identifies an OAM trace route test run. The fourth index element selects a single Alcatel-Lucent SROS OAM vprnTraceRoute operation result. The fifth and sixth indexes select the hop and the probe at that hop for a particular Alcatel-Lucent SROS OAM vprnTraceRoute operation. The seventh index selects either the requestors or responders L3 route information.

The value of tmnxOamVprnTrL3MapReporter specifies who reported the route information in this row entry. It may have come from the vprnTraceRoute requestors local information or it may be from the remote vprnTraceRoute responder.

The value of tmnxOamVprnTrL3MapRouterID indicates the router ID of the node, requestor or responder, that provided this route information.

The value of tmnxOamVprnTrL3MapRteDestAddr indicates the IP address to be advertised for the route information returned by this vprnTraceRoute reply. When used together with the values in tmnxOamVprnTrL3MapRteDestMask and tmnxOamVprnTrL3MapRteVprnLabel a customer route can be identified. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamVprnTrL3MapDestAddrType and tmnxOamVprnTrL3MapDestAddrType.

The value of tmnxOamVprnTrL3MapRteDestMask indicates the number of prefix bits (prefix width) to be &-ed with IP address in tmnxOamVprnTrL3MapRteDestAddr. This object was obsoleted in release 4.0 and replaced with InetAddress object tmnxOamVprnTrL3MapDestMaskLen.

The value of tmnxOamVprnTrL3MapRteVprnLabel indicates the VPRN label associated with the route information returned in this vprnTraceRoute reply.

The value of tmnxOamVprnTrL3MapRteMetrics indicates the metrics to be used with this vprnTraceRoute route.

The value of tmnxOamVprnTrL3MapRteLastUp indicates the time this route was last added or modified by the protocol.

The value of tmnxOamVprnTrL3MapRteOwner indicates the protocol that owns this route. It may be a local or remote route.

The value of tmnxOamVprnTrL3MapRtePref indicates the route preference value for this route.

The value of tmnxOamVprnTrL3MapRteDist is the route distinguisher associated with the route information returned in this vprnTraceRoute reply.

The value of tmnxOamVprnTrL3MapNumNextHops indicates the number of entries in the tmnxOamVprnTrNextHopTable for this route.

The value of tmnxOamVprnTrL3MapNumRteTargets indicates the number of entries in the tmnxOamVprnTrRTTable for this route.

The value of tmnxOamVprnTrL3MapDestAddrType indicates the type of internet address stored in tmnxOamVprnTrL3MapDestAddress.

The value of tmnxOamVprnTrL3MapDestAddress indicates the Internet address to be advertised for the route information returned by this vprnTraceRoute reply. When used together with the values in tmnxOamVprnTrL3MapRteDestMask and tmnxOamVprnTrL3MapRteVprnLabel a customer route can be identified.

The value of tmnxOamVprnTrL3MapDestMaskLen indicates the number of prefix bits (prefix width) to be &-ed with the IP address in tmnxOamVprnTrL3MapDestAddress.

Defines a table for storing the results of an OAM vprnTraceRoute probe operation where a L3 route next hop list is returned. An entry in this table is created when the result of an OAM vprnTraceRoute probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamVprnTrNextHopTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamVprnTrNextHopEntry belongs to. The third index element identifies an OAM trace route test run. The fourth, fifth and sixth index elements select a single OAM vprnTraceRoute reply. The seventh index selects either the requestors or responders route information. The eighth index selects a single L3 next hop entry within a specific vprnTraceRoute probe reply route information.

The tmnxOamVprnTrNextHopIndex selects a single L3 next hop entry associated with the router information returned within a specific vprnTraceRoute probe reply. The agent starts assigning tmnxOamVprnTrNextHopIndex values at 1.

The value of tmnxOamVprnTrNextHopRtrID is the router ID for this L3 next hop entry. This object was obsoleted in release 6.0 and replaced with InetAddress objects tmnxOamVprnTrNextHopAddrType and tmnxOamVprnTrNextHopAddress.

The value of tmnxOamVprnTrNextHopType indicates whether the route owner is a local route or a remote, BGP-VPRN, route.

When the value of tmnxOamVprnTrNextHopType is remote the value of tmnxOamVprnTrNextHopTunnelID indicates the tunnel ID used to reach this BGP next hop.

When the value of tmnxOamVprnTrNextHopType is remote the value of tmnxOamVprnTrNextHopTunnelType indicates the type of tunnel used to reach this BGP next hop.

When the value of tmnxOamVprnTrNextHopType is local the value of tmnxOamVprnTrNextHopIfIndex indicates the interface used to reach this ECMP next hop.

tmnxOamVprnTrNextHopAddrType indicates the type of Internet address stored in tmnxOamVprnTrNextHopAddress. Address types unknown(0), ipv4(1), ipv6(2), and ipv6z(4) are supported.

The value of tmnxOamVprnTrNextHopAddress is the Internet address for this L3 next hop entry.

Defines a table for storing the results of an OAM vprnTraceRoute probe operation where a L3 route target list is returned. An entry in this table is created when the result of an OAM vprnTraceRoute probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamVprnTrRTTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamVprnTrRTEntry belongs to. The third index element identifies an OAM trace route test run. The fouth, fifth and sixth index elements select a single OAM vprnTraceRoute reply. The seventh index selects either the probe requestors or probe repliers route information. The eighth index selects successive L3 route target entries contained in a specific vprnTraceRoute requestor or probe reply route information.

The tmnxOamVprnTrRTIndex selects a single L3 route target entry associated with the router information returned within a specific vprnTraceRoute probe reply. The agent starts assigning tmnxOamVprnTrRTIndex values at 1.

The value of tmnxOamVprnTrRouteTarget is the route target ID for this L3 route target entry.

Defines a table for storing the results of an OAM lspTraceRoute or p2mpLspTrace probe operation when a Downstream Mapping TLV was returned. Each row represents a single downstream label within a returned downstream L2 mapping TLV. An entry in this table is created when the result of an OAM lspTraceRoute or p2mpLspTrace probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamLspTrDSLabelTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamLspTrMapEntry belongs to. The third index element identifies a OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Alcatel-Lucent SROS OAM Trace Route operation. The seventh index selects a single downstream L2 map entry within the specific probe reply. The eigth index selects seccessive downstream L2 label entries contained in a specific probe reply.

The tmnxOamLspTrDSLabelIndex selects a single downstream L2 label entry within a specific L2 mapping entry reply. The agent starts assigning tmnxOamLspTrDSLabelIndex values at 1.

The value of tmnxOamLspTrDSLabelLabel is the label used by the downstream router specified by this downstream L2 label entry.

The value of tmnxOamLspTrDSLabelProtocol is the signaling protocol used by the router for the label specified by this downstream L2 label entry.

Each row in tmnxOamMcastTrCtlTable contains the multicast-trace-route- specific configuration information needed to launch a multicast trace route test. The rest of the configuration information needed to launch the test resides in the corresponding row of tmnxOamTrCtlTable. Results of multicast trace route tests are stored in tmnxOamTrResultsTable, tmnxOamTrProbeHistoryTable, and tmnxOamMcastTrRespTable.

The system creates a row in tmnxOamMcastTrCtlTable when a row is created in tmnxOamTrCtlTable with tmnxOamTrCtlTestMode set to mcastTraceRoute. The system deletes a row in tmnxOamMcastTrCtlTable when the corresponding row in tmnxOamTrCtlTable is deleted.

The value of tmnxOamMcastTrCtlVRtrID specifies the virtual router to be used for the test. The value specified must be the index of an active row in TIMETRA-VRTR-MIB::vRtrConfTable. tmnxOamTrCtlVRtrID (i.e. the equivalent object in the parent table) is irrelevant when the test type is mcastTraceRoute. When directing an mcastTraceRoute test to use a virtual router associated with a VPRN service, the virtual router can be specified using tmnxOamMcastTrCtlVRtrID (with the VPRNs virtual router number) or tmnxOamTrCtlServiceId (with the VPRNs service number). tmnxOamTrCtlServiceId is preferred, because service numbers are constant across an SROS reboot (while virtual routers may be renumbered). If non-default values are specified for both tmnxOamMcastTrCtlVRtrID and tmnxOamTrCtlServiceId, tmnxOamTrCtlServiceId is used.

tmnxOamMcastTrCtlSrcIpAddr was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMcastTrCtlSrcAddrType and tmnxOamMcastTrCtlSrcAddress.

tmnxOamMcastTrCtlDestIpAddr was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMcastTrCtlDestAddrType and tmnxOamMcastTrCtlDestAddress.

tmnxOamMcastTrCtlRespIpAddr was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMcastTrCtlRespAddrType and tmnxOamMcastTrCtlRespAddress.

tmnxOamMcastTrCtlGrpIpAddr was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMcastTrCtlGrpAddrType and tmnxOamMcastTrCtlGrpAddress.

The value of tmnxOamMcastTrCtlHops specifies the maximum number of hops that will be traced along the path to the source. This object is optional.

The value of tmnxOamMcastTrQueryId indicates the 24 bit random number that uniquely identifies the multicast trace query. When the router receives the response back from the first hop router, it maps the response to the query by looking at the query id in the packet.

The value of tmnxOamMcastTrCtlSrcAddrType specifies the type of Internet address stored in tmnxOamMcastTrCtlSrcAddress.

The value of tmnxOamMcastTrCtlSrcAddress specifies the Internet address to be used as the source address for the mcastTraceRoute test. A non-empty address must be specified before the test is enabled.

The value of tmnxOamMcastTrCtlDestAddrType specifies the type of Internet address stored in tmnxOamMcastTrCtlDestAddress.

The value of tmnxOamMcastTrCtlDestAddress specifies the Internet address to be used as the destination address for the mcastTraceRoute test. The multicast trace query is sent to this destination address. If this object is not set, the multicast trace starts from this router.

The value of tmnxOamMcastTrCtlRespAddrType specifies the type of Internet address stored in tmnxOamMcastTrCtlRespAddress.

The value of tmnxOamMcastTrCtlRespAddress specifies the Internet address to be used as the response address for the mcastTraceRoute test. If this object is not set, the system IP address is used as the response address.

The value of tmnxOamMcastTrCtlGrpAddrType specifies the type of Internet address stored in tmnxOamMcastTrCtlGrpAddress.

The value of tmnxOamMcastTrCtlGrpAddress specifies the Internet multicast group address for the mcastTraceRoute test. A non-empty address must be specified before the test is enabled.

Defines the Alcatel-Lucent SROS OAM Multicast Trace Route Response Table for providing, via SNMP, the result of OAM mcastTraceRoute test operation. The results of these tests are stored in the tmnxOamTrResultsTable, the tmnxOamTrProbeHistoryTable and the tmnxOamMcastTrRespTable.

Defines an entry in the tmnxOamMcastTrRespTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamMcastTrRespEntry belongs to. The third index element selects an OAM trace route test run. The fourth index element selects a single Alcatel-Lucent SROS OAM Trace Route operation result. The fifth and sixth indexes select the hop and the probe at that hop for a particular Alcatel-Lucent SROS OAM Trace Route operation.

tmnxOamMcastTrRespQueryArrivalTime specifies the 32 bit NTP timestamp. It is the time at which a particular hop received the Multicast Trace query/request.

tmnxOamMcastTrRespInIfAddr specifies the address of the interface on which packets from this source and group are expected to arrive. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMcastTrRespInIfAddrType and tmnxOamMcastTrRespInIfAddress.

tmnxOamMcastTrRespOutIfAddr specifies the address of the interface on which packets from this source and group flow to the specified destination. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMcastTrRespOutIfAddrType and tmnxOamMcastTrRespOutIfAddress.

tmnxOamMcastTrRespPrevHopRtrAddr specifies the router from which this router expects packets from this source. This may be a multicast group (e.g. ALL-[protocol]-ROUTERS.MCAST.NET) if the previous hop is not known because of the workings of the multicast routing protocol. This object was obsoleted in release 4.0 and replaced with InetAddress objects tmnxOamMcastTrRespPhRtrAddrType and tmnxOamMcastTrRespPhRtrAddress.

tmnxOamMcastTrRespInPktCount contains the number of multicast packets received for all groups and sources on the incoming interface, or 0xffffffff if no count can be reported. This counter should have the same value as ifInMulticastPkts from the IF-MIB for this interface.

tmnxOamMcastTrRespOutPktCount contains the number of multicast packets that have been transmitted or queued for transmission for all groups and sources on the outgoing interface, or 0xffffffff if no count can be reported. This counter should have the same value as ifOutMulticastPkts from the IF-MIB for this interface.

tmnxOamMcastTrRespSGPktCount counts the number of packets from the specified source forwarded by this router to the specified group, or 0xffffffff if no count can be reported. If the value of tmnxOamMcastTrRespSrcBit is set to one, the count is for the source network, as specified by tmnxOamMcastTrRespSrcMask. If the S bit is set and the Src Mask field is 63, indicating no source-specific state, the count is for all sources sending to this group.

tmnxOamMcastTrRespRtgProtocol describes the routing protocol in use between this router and the previous-hop router.

tmnxOamMcastTrRespFwdTtl contains the TTL that a packet is required to have before it will be forwarded over the outgoing interface.

tmnxOamMcastTrRespMBZBit is zeroed on transmission and ignored on reception.

If the value of tmnxOamMcastTrRespSrcBit is 1, it indicates that the packet count for the source-group pair is for the source network, as determined by masking the source address with the tmnxOamMcastTrRespSrcMask field.

tmnxOamMcastTrRespSrcMask contains the number of 1s in the netmask this router has for the source (i.e. a value of 24 means the netmask is 0xffffff00). If the router is forwarding solely on group state, this field is set to 63 (0x3f).

tmnxOamMcastTrRespFwdCode contains a forwarding information/error code: noError(0) - No error wrongIf(1) - Traceroute request arrived on an interface to which this router would not forward for this source,group,destination. pruneSent(2) - This router has sent a prune upstream which applies to the source and group in the traceroute request. pruneRecvd(3) - This router has stopped forwarding for this source and group in response to a request from the next hop router. scoped(4) - The group is subject to administrative scoping at this hop. noRoute(5) - This router has no route for the source or group and no way to determine a potential route. wrongLastHop(6) - This router is not the proper last-hop router. notForwarding(7) - This router is not forwarding this source,group out the outgoing interface for an unspecified reason. reachedRP(8) - Reached Rendez-vous Point or Core rpfIf(9) - Traceroute request arrived on the expected RPF interface for this source,group. noMulticast(10) - Traceroute request arrived on an interface which is not enabled for multicast. infoHidden(11) - One or more hops have been hidden from this trace. fatalError(12) - Router may know the previous hop but cannot forward the message to it. noSpace(129) - There was not enough room to insert another response data block in the packet. oldRouter(130) - The previous hop router does not understand traceroute requests adminProhib(131) - Traceroute is administratively prohibited. unknown(132) - Unknown forwarding code received.

tmnxOamMcastTrRespInIfAddrType specifies the type of Internet address stored at tmnxOamMcastTrRespInIfAddress.

tmnxOamMcastTrRespInIfAddress specifies the Internet address of the interface on which packets from this source and group are expected to arrive.

tmnxOamMcastTrRespOutIfAddrType specifies the type of Internet address stored in tmnxOamMcastTrRespOutIfAddress.

tmnxOamMcastTrRespOutIfAddress specifies the Internet address of the interface on which packets from this source and group flow to the specified destination.

tmnxOamMcastTrRespPhRtrAddrType specifies the type of internet address stored in tmnxOamMcastTrRespPhRtrAddress.

tmnxOamMcastTrRespPhRtrAddress specifies the Internet address of the router from which this router expects packets for this source. This may be a multicast group (e.g. ALL-[protocol]-ROUTERS.MCAST.NET) if the previous hop is not known because of the workings of the multicast routing protocol.

tmnxOamLTtraceCtlTable defines the Alcatel-Lucent SROS OAM LDP Tree Trace Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM ldpTreeTrace manual test operations. The results of these tests are stored in the tmnxOamLTtraceResultsTable and the tmnxOamLTtraceHopInfoTable.

tmnxOamLTtraceCtlEntry represents a row in the tmnxOamLTtraceCtlTable. The first index element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamTrCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamLTtraceCtlLdpPrefixType specifies the type of Internet address stored in tmnxOamLTtraceCtlLdpPrefix.

The value of tmnxOamLTtraceCtlLdpPrefix specifies the Internet address prefix for the LDP based LSP for this OAM LDP Tree discovery test.

The value of tmnxOamLTtraceCtlLdpPrefixLen specifies the Internet address prefix length for the LDP based LSP for this OAM LDP Tree discovery test. The value of this parameter is valid only when LDP IP Prefix has been specified.

The value of tmnxOamLTtraceCtlMaxPath specifies the maximum number of paths that can be discovered for the given LDP Prefix (tmnxOamLTtraceCtlLdpPrefix).

The value of tmnxOamLTtraceCtlDownstreamMpTlv specifies the type of downstream mapping TLV to insert in the MPLS echo request PDUs when launching the test. When an LDP tree trace test is created, the value of this object defaults to the value of the global configuration object tmnxOamMplsEchoDownstreamMapTlv.

The value of tmnxOamLTtraceMaxConRequests indicates the maximum number of concurrent LDP Tree Trace manual discovery sessions that are allowed within an agent implementation.

tmnxOamLTtraceResultsTable defines the Alcatel-Lucent SROS OAM Trace Route Test Results Table for keeping track of the status of a tmnxOamTrCtlEntry having tmnxOamTrCtlTestMode as ldpTreeTrace. An entry is added to the tmnxOamLTtraceResultsTable when an tmnxOamTrCtlEntry is created with tmnxOamTrCtlTestMode having value ldpTreeTrace. An entry is removed from the tmnxOamTrResultsTable when such a corresponding entry, tmnxOamTrCtlEntry, is deleted.

tmnxOamLTtraceResultsEntry represents a row in the tmnxOamLTtraceResultsTable. The two indices of the tmnxOamLTtraceResultsTable are the same as that in the tmnxOamTrCtlTable in order for a tmnxOamLTtraceResultsEntry to correspond to the tmnxOamTrCtlEntry that caused it to be created.

The value of tmnxOamLTtraceResultsDisPaths indicates the number of discovered ECMP paths in this OAM LDP Tree discovery test.

The value of tmnxOamLTtraceResultsFailedHops indicates the number of hops from which no successful response was received during this OAM LDP Tree discovery test.

The value of tmnxOamLTtraceResultsDisState indicates the current state of the discovery process for the LDP IP prefix (tmnxOamLTtraceCtlLdpPrefix) in this OAM LDP Tree discovery test.

The value of tmnxOamLTtraceResultsDisStatus indicates the current discovery status bits for the LDP IP prefix (tmnxOamLTtraceCtlLdpPrefix) in this OAM LDP Tree discovery test.

tmnxOamLTtraceHopInfoTable defines the Alcatel-Lucent SROS OAM LDP Trace Hops table for keeping track of the results of an LDP Tree Trace test on a per hop basis. An entry is added to the tmnxOamLTtraceHopInfoTable when a hop is discovered after setting the tmnxOamTrCtlAdminStatus object of the tmnxOamTrCtlEntry (having tmnxOamTrCtlTestMode as ldpTreeTrace) to enabled(1). An entry is removed from the tmnxOamLTtraceHopInfoTable when its corresponding tmnxOamTrCtlEntry is deleted.

tmnxOamLTtraceHopInfoEntry represents a row in the tmnxOamLTtraceHopInfoTable. The first two indices of the tmnxOamLTtraceHopInfoTable are the same as the tmnxOamTrCtlTable in order for a tmnxOamLTtraceHopInfoEntry to correspond to the tmnxOamTrCtlEntry that caused it to be created. The third index element, tmnxOamLTtraceHopIndex, selects a hop in an Alcatel-Lucent SROS LDP Tree Trace discovered path.

The value of tmnxOamLTtraceHopIndex indicates the hop index for an Alcatel-Lucent SROS OAM Trace hop for an LDP Tree Trace test. The hop index values are assigned starting at 1.

The value of tmnxOamLTtraceUpStreamHopIndex indicates the hop index (tmnxOamLTtraceHopIndex) of its upstream hop discovered during the LDP Tree Trace test. The value of tmnxOamLTtraceUpStreamHopIndex is 0 for the hops which are the root of the different discovered paths for the LDP Tree Trace test.

The value of tmnxOamLTtraceHopAddrType indicates the type of Internet address stored in tmnxOamLTtraceHopAddr.

The value of tmnxOamLTtraceHopAddr indicates the IP address of a hop for a given LDP based LSP associated with the OAM LDP Tree trace test.

The value of tmnxOamLTtraceHopDstAddrType indicates the type of Internet address stored in tmnxOamLTtraceHopDstAddr.

The value of tmnxOamLTtraceHopDstAddr indicates the destination IP address (127 Address) of a path associated with the hop.

The value of tmnxOamLTtraceHopEgrNhAddrType indicates the type of Internet address stored in tmnxOamLTtraceHopEgrNhAddr.

The value of tmnxOamLTtraceHopEgrNhAddr indicates the next hop IP address (wrt the ingress router), which is used to reach this Hop (tmnxOamLTtraceHopAddr).

The value of tmnxOamLTtraceHopDisTtl indicates the label time-to-live value used to discover this hop.

The value of tmnxOamLTtraceHopLastRc indicates the OAM return code received in the OAM trace response.

The value of tmnxOamLTtraceHopDiscoveryState indicates the current discovery state of this hop.

The value of tmnxOamLTtraceHopDiscoveryTime indicates the sysUpTime when the hop was discovered.

The value of tmnxOamLTtraceHopLabel1 indicates the first (top of the label stack) label for this hop.

The value of tmnxOamLTtraceHopLabel2 indicates the second label for this hop.

The value of tmnxOamLTtraceHopLabel3 indicates the third label for this hop.

The value of tmnxOamLTtraceHopLabel4 indicates the fourth label for this hop.

The value of tmnxOamLTtraceHopLabel5 indicates the fifth label for this hop.

The value of tmnxOamLTtraceHopLabel6 indicates the sixth label for this hop.

The value of tmnxOamLTtraceHopIfAddrType indicates the IP address type for the interface IP address for this hop.

The value of tmnxOamLTtraceHopIfAddress indicates the IP Address for the interface for this hop.

The value of tmnxOamLTtraceHopRouterIdType indicates the IP address type for the Router ID for this hop.

The value of tmnxOamLTtraceHopRouterId indicates the IP Address for the Router ID for this hop.

tmnxOamLTtraceAutoConfigTable contains an entry for configuration information about each instance of Automatic (background) LDP Tree Trace.

tmnxOamLTtraceAutoConfigEntry represents a row in the tmnxOamLTtraceAutoConfigTable. Each entry represents the Automatic LDP Tree Trace instance running on a virtual router. A row entry can be created and deleted through the tmnxOamLTtraceAutoRowStatus object.

The value of tmnxOamLTtraceAutoRowStatus specifies the row status of the Auto LDP Tree Trace instance for the virtual router. A row with default attribute values is created by setting tmnxOamLTtraceAutoRowStatus to createAndGo. A row entry can be destroyed by setting tmnxOamLTtraceAutoRowStatus to destroy. An attempt to destroy a row will fail if tmnxOamLTtraceAutoAdminState is not set to outOfService. Deletion of an entry in this table results in deletion of all the corresponding tables: tmnxOamLTtraceAutoStatusTable, tmnxOamLTtraceFecInfoTable, and tmnxOamLTtracePathInfoTable.

The value of tmnxOamLTtraceAutoLastChanged indicates the last time the value of a writable object in this row was modified.

The value of tmnxOamLTtraceAutoStorageType specifies the storage type for this conceptual row. Conceptual rows having the value permanent need not allow write-access to any columnar objects in the row.

The value of tmnxOamLTtraceAutoAdminState specifies the state based on which the Auto LDP Tree Discovery process starts or stops. When the tmnxOamLTtraceAutoAdminState becomes inService, the Auto LDP Tree Discovery process starts, and periodic path-probing on the previously discovered paths, if any, continues. When the tmnxOamLTtraceAutoAdminState becomes outOfService, the Auto LDP Tree Discovery process and periodic path-probing on the discovered paths stop. At the start of the Auto discovery process, it selects the address FECs imported from LDP peers (TIMETRA-LDP-MIB:: vRtrLdpAddrFecTable) provided the FECs pass the configured policies (tmnxOamLTtraceAutoPolicy1..tmnxOamLTtraceAutoPolicy5). For all the FECs (tmnxOamLTtraceAutoTotalFecs), it automatically creates entries from the tmnxOamLTtraceFecInfoTable. As a part of the auto discovery process, it creates entries from the tmnxOamLTtracePathInfoTable for each discovered path.

The value of tmnxOamLTtraceAutoFcName specifies the forwarding class of the MPLS Echo request packets. The forwarding class name must be one of those defined in the tFCNameTable in TIMETRA-QOS-MIB. The agent creates predefined entries in the tFCNameTable for premium, assured, and be (for best-effort) forwarding classes. The actual forwarding class encoding is controlled by the network egress LSP-EXP mappings.

The value of tmnxOamLTtraceAutoProfile specifies the profile value to be used with the forwarding class specified in tmnxOamLTtraceAutoFcName. The profile value must be consistent with the specified forwarding class: assured = in or out premium = in be = out

The value of tmnxOamLTtraceAutoDiscIntvl specifies number of minutes to wait before repeating LDP Tree Auto Discovery process.

The value of tmnxOamLTtraceAutoMaxPath specifies the maximum number of paths that can be discovered for a selected IP Address FEC (tmnxOamLTtraceAutoTotalFecs).

The value of tmnxOamLTtraceAutoTrMaxTtl specifies the maximum label time-to-live value for an LSP trace request during the tree discovery.

The value of tmnxOamLTtraceAutoTrTimeOut specifies the time-out value, in seconds, for an lsp trace request during the tree discovery.

The value of tmnxOamLTtraceAutoTrMaxFailures specifies the maximum number of consecutive timeouts allowed before terminating an lsp trace request to a hop.

The value of tmnxOamLTtraceAutoPolicy1 specifies the first policy used to filter LDP imported Address FECs.

The value of tmnxOamLTtraceAutoPolicy2 specifies the second policy used to filter LDP imported Address FECs.

The value of tmnxOamLTtraceAutoPolicy3 specifies the third policy used to filter LDP imported Address FECs.

The value of tmnxOamLTtraceAutoPolicy4 specifies the fourth policy used to filter LDP imported Address FECs.

The value of tmnxOamLTtraceAutoPolicy5 specifies the fifth policy used to filter LDP imported Address FECs.

The value of tmnxOamLTtraceAutoProbeIntvl specifies the number of minutes to wait before repeating probing (pinging) a discovered path.

The value of tmnxOamLTtraceAutoPrTimeOut specifies the time-out value, in minutes, for a ping request during probing. tmnxOamLTtraceAutoPrTimeOut cannot be greater than tmnxOamLTtraceAutoProbeIntvl.

The value of tmnxOamLTtraceAutoPrMaxFailures specifies the maximum number of consecutive timeouts allowed before failing a path probe (ping).

tmnxOamLTtraceAutoStatusTable contains an entry for operational information about each instance of Automatic (background) LDP Tree Trace.

tmnxOamLTtraceAutoStatusEntry represents a row in the tmnxOamLTtraceAutoStatusTable. Entries cannot be created or deleted via snmp SET operations. An entry is created whenever a row is created in tmnxOamLTtraceAutoConfigTable.

The value of tmnxOamLTtraceAutoDiscoveryState indicates the current state of the discovery process.

The value of tmnxOamLTtraceAutoTotalFecs indicates the number of Address FECs that have been selected for discovery during the current discovery process. An Address FEC imported from an LDP peer (TIMETRA-LDP-MIB:: vRtrLdpAddrFecTable)is selected if it passes the associated policies (tmnxOamLTtraceAutoPolicy1.. tmnxOamLTtraceAutoPolicy5).

The value of tmnxOamLTtraceAutoDisFecs indicates the number of selected Address FECs that have been discovered successfully during the current discovery process.

The value of tmnxOamLTtraceAutoLastDisStart indicates the sysUpTime when the last Auto discovery process started. If no discovery process has started, the value will be 0.

The value of tmnxOamLTtraceAutoLastDisEnd indicates the sysUpTime when the last Auto discovery process ended. Before the first discovery process ends, it would be 0. At the end of a discovery this value is set. This value is not reset during starting/restarting.

The value of tmnxOamLTtraceAutoLastDisDur indicates the time (in seconds) it took to finish the last discovery process.If no test has been finished, the value is 0. This value is updated only when a discovery ends.

tmnxOamLTtraceFecInfoTable contains entries for the operational information about the automatically selected FECs.

tmnxOamLTtraceFecInfoEntry represents a row in the tmnxOamLTtraceFecInfoTable. Entries cannot be created and deleted via SNMP SET operations.

The value of tmnxOamLTtraceFecPrefixType specifies the type of remote IP address stored in tmnxOamLTtraceFecPrefix. Currently only ipv4 type is supported.

The value of tmnxOamLTtraceFecPrefix indicates the Internet address prefix for an LDP based LSP associated with the OAM LDP Tree trace test.

The value of tmnxOamLTtraceFecPrefLen indicates the Internet address prefix length for the LDP based LSP associated with the OAM LDP Tree trace test.

The value of tmnxOamLTtraceFecDiscoveryState indicates the current state of the discovery process for the Address FEC.

The value of tmnxOamLTtraceFecDisStatusBits indicates the current discovery status bits for the Address FEC.

The value of tmnxOamLTtraceFecDisPaths indicates the number of discovered ECMP paths for the Address FEC.

The value of tmnxOamLTtraceFecFailedHops indicates the number of hops from which no successful response was received.

The value of tmnxOamLTtraceFecLastDisEnd indicates the sysUpTime when the FEC was last discovered.

The value of tmnxOamLTtraceFecFailedProbes indicates the number of discovered paths which are in failed probing state.

The value of tmnxOamLTtraceFecProbeState indicates the current overall probing state for the discovered paths of the Address FEC. The tmnxOamLTtraceFecProbeState is considered as oK when probing on all the associated discovered paths is OK. It is considered as failed when probing on all the associated discovered paths failed. It is considered as partially failed when probing on one or more, but not all, discovered paths failed.

The value of tmnxOamLTtraceFecSendErrProbes indicates the number of discovered paths which are experiencing problems in sending probe (ping) requests.

tmnxOamLTtracePathInfoTable contains entries with operational information about the automatically discovered ECMP paths.

tmnxOamLTtracePathInfoEntry represents a row in the tmnxOamLTtracePathInfoTable. Entries cannot be created and deleted via SNMP SET operations.

The value of tmnxOamLTtracePathDstAddrType indicates the type of Internet address stored in tmnxOamLTtracePathDstAddr.

The value of tmnxOamLTtracePathDstAddr indicates the destination IP address (127 Address) of a path for a given LDP based LSP associated with the OAM LDP Tree trace test.

The value of tmnxOamLTtracePathRemAddrType indicates the type of Internet address stored in tmnxOamLTtracePathRemoteAddr.

The value of tmnxOamLTtracePathRemoteAddr indicates the associated interface IP address or the router ID of the egress router.

The value of tmnxOamLTtracePathEgrNhAddrType indicates the type of Internet address stored in tmnxOamLTtracePathEgrNhAddr.

The value of tmnxOamLTtracePathEgrNhAddr indicates the next hop IP address (wrt the ingress router) used to reach the associated ECMP path endpoint.

The value of tmnxOamLTtracePathDisTtl indicates the label time-to-live value used to discover the egress router for the path.

The value of tmnxOamLTtracePathLastDisTime indicates the sysUpTime when the path was last discovered.

The value of tmnxOamLTtracePathLastRc indicates the OAM return code received in the OAM ping response.

The value of tmnxOamLTtracePathProbeState indicates the current probing (ping) state for the discovered ECMP path. The tmnxOamLTtracePathProbeState is considered as failed when number of consecutive timeouts for the ping request reached its maximum allowed limit (tmnxOamLTtraceAutoPrMaxFailures). The tmnxOamLTtracePathProbeState is considered as oK after receiving a successful ping response for the associated path.

The value of tmnxOamLTtracePathProbeTmOutCnt indicates the number of consecutive timeouts for the associated ping request. This tmnxOamLTtracePathProbeTmOutCnt is reset to 0 after receiving a successful ping response from the path destination.

The value of tmnxOamLTtracePathProbeSendErr indicates the state of the last path probe (ping) request. The tmnxOamLTtracePathProbeSendErr is considered as failed if the last probe (ping) request could not be sent due to some local failure else it is oK.

Defines the Alcatel-Lucent SROS OAM VCCV Trace Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM vccvTraceRoute test operations. The results of these tests are stored in the tmnxOamTrResultsTable, the tmnxOamTrProbeHistoryTable and the tmnxOamVccvTrNextPwSegmentTable.

Defines an entry in the tmnxOamVccvTrCtlTable. The first index element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamTrCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamVccvTrCtlSdpIdVcId specifies the SDP binding of the FEC 128 pseudowire to be used when performing a vccv-trace operation. A non-zero value is mandatory when testing a FEC 128 pseudowire. The all-zeros value indicates an unused SDP binding. If tmnxOamVccvTrCtlSdpIdVcId is set to a non-default value, then the following objects must be default: tmnxOamVccvTrCtlSpokeSdpId, tmnxOamVccvTrCtlSaiiGlobalId, tmnxOamVccvTrCtlSaiiPrefix, tmnxOamVccvTrCtlSaiiAcId, tmnxOamVccvTrCtlTaiiGlobalId, tmnxOamVccvTrCtlTaiiPrefix, and tmnxOamVccvTrCtlTaiiAcId. If the value of tmnxOamVccvTrCtlSdpIdVcId is non-zero and invalid, or the pseudowire is administratively down, or unavailable, the OAM Trace request message probe is not sent and an appropriate error value is written to tmnxOamTrProbeHistoryStatus for that probe entry. Once the interval timer expires, the next probe attempt will be made if required.

The value of tmnxOamVccvTrCtlReplyMode specifies the method of reply due to the vccv-traceRoute request message. ip (2) out-of-band reply controlChannel (4) inband reply This parameter is optional for vccv-traceRoute.

The value of tmnxOamVccvTrCtlSpokeSdpId specifies the spoke SDP identifier to be used when performing a vccv-trace test on a FEC 129 pseudowire. This object is optional. At most one of tmnxOamVccvTrCtlSdpIdVcId and tmnxOamVccvTrCtlSpokeSdpId can be set to a non-default value on a particular row. A value of zero indicates that no spoke SDP identifier has been configured.

The value of tmnxOamVccvTrCtlSaiiGlobalId specifies the global identifier of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. tmnxOamVccvTrCtlSaiiGlobalId, tmnxOamVccvTrCtlSaiiPrefix, tmnxOamVccvTrCtlSaiiAcId, tmnxOamVccvTrCtlTaiiGlobalId, tmnxOamVccvTrCtlTaiiPrefix, and tmnxOamVccvTrCtlTaiiAcId can be used (together) to identify a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvTrCtlSdpIdVcId and tmnxOamVccvTrCtlSaiiGlobalId can be set to a non-default value on a particular row. A value of zero indicates that no global identifier has been configured.

The value of tmnxOamVccvTrCtlSaiiPrefix specifies the prefix of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvTrCtlSdpIdVcId and tmnxOamVccvTrCtlSaiiPrefix can be set to a non-default value on a particular row. A value of zero indicates that no prefix has been configured.

The value of tmnxOamVccvTrCtlSaiiAcId specifies the attachment circuit identifier of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvTrCtlSdpIdVcId and tmnxOamVccvTrCtlSaiiAcId can be set to a non-default value on a particular row. A value of zero indicates that no attachment circuit identifier has been configured.

The value of tmnxOamVccvTrCtlTaiiGlobalId specifies the global identifier of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvTrCtlSdpIdVcId and tmnxOamVccvTrCtlTaiiGlobalId can be set to a non-default value on a particular row. A value of zero indicates that no global identifier has been configured.

The value of tmnxOamVccvTrCtlTaiiPrefix specifies the prefix of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvTrCtlSdpIdVcId and tmnxOamVccvTrCtlTaiiPrefix can be set to a non-default value on a particular row. A value of zero indicates that no prefix has been configured.

The value of tmnxOamVccvTrCtlTaiiAcId specifies the attachment circuit identifier of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. At most one of tmnxOamVccvTrCtlSdpIdVcId and tmnxOamVccvTrCtlTaiiAcId can be set to a non-default value on a particular row. A value of zero indicates that no attachment circuit identifier has been configured.

The value of tmnxOamVccvTrCtlTestSubMode specifies the type of VCCV trace route test to perform. When this object is unspecified(1), the type of VCCV trace route test to be performed is determined when the test is started, from the set of tmnxOamVccvTrCtlTable objects configured with non-default values. If there is a mismatch between tmnxOamVccvTrCtlTestSubMode and the type of the pseudowire to be tested, the test will fail. For example, if tmnxOamVccvTrCtlTestSubMode is static(2), and tmnxOamVccvTrCtlSdpIdVcId refers to an SDP binding with TIMETRA-SDP-MIB::sdpDelivery not equal to mplsTp(3), the test will fail. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause.

The value of tmnxOamVccvTrCtlAssocChannel specifies the launched echo requests usage of the Associated Channel (ACH) mechanism, when performing an MPLS-TP VCCV trace route test. When tmnxOamVccvTrCtlTestSubMode is static(2), the default value for tmnxOamVccvTrCtlAssocChannel is nonIp(2). The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause.

Defines a table for storing the results of an OAM vccvTraceRoute probe operation where a Vccv next hop list is returned. An entry in this table is created when the result of an OAM vccvTraceRoute probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamVccvTrNextPwSegmentTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamVccvTrNextPwSegmentEntry belongs to. The third index element identifies an OAM trace route test run. The fourth, fifth and sixth index elements select a single OAM vccvTraceRoute reply.

The value of tmnxOamVccvTrNextPwID indicates the next-hop pseudo-wire in the trace route operation for a specific vccvTraceRoute probe reply. A value of 0 indicates that there are no further next-hops for a specific trace route operation.

The value of tmnxOamVccvTrNextPwType indicates the next-hop pseudo-wire type in the trace route operation for a specific vccvTraceRoute probe reply.

The value of tmnxOamVccvTrNextSenderAddrType indicates the next-hop sender IP address type in the trace route operation for a specific vccvTraceRoute probe reply.

The value of tmnxOamVccvTrNextSenderAddr indicates the next-hop sender IP address in the trace route oepration for a specific vccvTraceRoute probe reply.

The value of tmnxOamVccvTrNextRemoteAddrType indicates the next-hop remote IP address type in the trace route operation for a specific vccvTraceRoute probe reply.

The value of tmnxOamVccvTrNextRemoteAddr indicates the next-hop remote IP address in the trace route operation for a specific vccvTraceRoute probe reply.

The value of tmnxOamVccvTrNextSaiiGlobalId indicates the global identifier of the Source Attachment Individual Identifier (SAII) of a specific vccvTraceRoute probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned.

The value of tmnxOamVccvTrNextSaiiPrefix indicates the prefix of the Source Attachment Individual Identifier (SAII) of a specific vccvTraceRoute probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned.

The value of tmnxOamVccvTrNextSaiiAcId indicates the attachment circuit identifier of the Source Attachment Individual Identifier (SAII) of a specific vccvTraceRoute probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned.

The value of tmnxOamVccvTrNextTaiiGlobalId indicates the global identifier of the Target Attachment Individual Identifier (TAII) of a specific vccvTraceRoute probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned.

The value of tmnxOamVccvTrNextTaiiPrefix indicates the prefix of the Target Attachment Individual Identifier (TAII) of a specific vccvTraceRoute probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned.

The value of tmnxOamVccvTrNextTaiiAcId indicates the attachment circuit identifier of the Target Attachment Individual Identifier (TAII) of a specific vccvTraceRoute probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned.

The value of tmnxOamVccvTrNextTpAgi indicates the Service Identifier field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, the all-zeros value is returned.

The value of tmnxOamVccvTrNextTpSaiiGlobalId indicates the Source Global ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned.

The value of tmnxOamVccvTrNextTpSaiiNodeId indicates the Source Node ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned.

The value of tmnxOamVccvTrNextTpSaiiAcId indicates the Source Attachment Circuit ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned.

The value of tmnxOamVccvTrNextTpTaiiGlobalId indicates the Destination Global ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned.

The value of tmnxOamVccvTrNextTpTaiiNodeId indicates the Destination Node ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned.

The value of tmnxOamVccvTrNextTpTaiiAcId indicates the Destination Attachment Circuit ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned.

Defines the Alcatel-Lucent SROS OAM P2MP LSP Trace Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM p2mpLspTrace test operations for a single leaf egress node of an P2MP LSP. The results of these tests are stored in the tmnxOamTrResultsTable and the tmnxOamTrProbeHistoryTable.

Defines an entry in the tmnxOamP2mpLspTrCtlTable. The first index element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamTrCtlTestIndex, enables the same management application to have multiple outstanding requests.

Administrative name of the target P2MP Labeled Switch Path (LSP) for this OAM P2MP LSP Trace test. This parameter is mandatory.

This parameter identifies an instance of a P2MP LSP, either a primary or secondary instance of a P2MP LSP Tree.

The value of tmnxOamP2mpLspTrCtlLeafIpAddr specifies the Internet address of the egress leaf node of a P2MP LSP Tree. This parameter is mandatory.

The value of tmnxOamP2mpLspTrCtlLeafIpAddrType specifies the type of Internet address stored in tmnxOamP2mpLspTrCtlLeafIpAddr.

Defines a table for storing the results of an OAM p2mpLspTrace probe operation when a Downstream Mapping TLV was returned. Each row represents a single label map within the returned downstream mapping TLV. An entry in this table is created when the result of an OAM p2mpLspTrace probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamP2mpLspTrMapTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamP2mpLspTrMapEntry belongs to. The third index element identifies an OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Alcatel-Lucent SROS OAM Trace Route operation. The seventh index selects a single downstream L2 map entry within the specific probe reply.

The value of tmnxOamP2mpLspTrMapIndex specifies a single L2 mapping entry within a specific p2mpLspTrace probe reply. The agent starts assigning tmnxOamP2mpLspTrMapIndex values at 1.

The value of tmnxOamP2mpLspTrMapDSIPv4Addr indicates the IPv4 address of the downstream LSR that this entry in the tmnxOamP2mpLspTrMapTable describes. If the interface to the downstream LSR is numbered, then the tmnxOamP2mpLspTrMapDSIPv4Addr can either be the downstream LSRs Router ID or the interface address of the downstream LSR. If the interface to the downstream LSR is unnumbered, the value of tmnxOamP2mpLspTrMapDSIPv4Addr indicates the downstream LSRs Router ID.

The value of tmnxOamP2mpLspTrMapAddrType indicates the type of downstream interface address specified by tmnxOamP2mpLspTrMapDSIfAddr. The only valid values for tmnxOamP2mpLspTrMapAddrType are ipv4Address, ipv4Unnumbered, ipv6Address and ipv6Unnumbered.

When tmnxOamP2mpLspTrMapAddrType has a value of ipv4Address tmnxOamP2mpLspTrMapDSIfAddr indicates the downstream LSRs interface address. When tmnxOamP2mpLspTrMapAddrType has a value of unnumbered, tmnxOamP2mpLspTrMapDSIfAddr indicates the index assigned by the upstream LSR to the interface.

The value of tmnxOamP2mpLspTrMapMTU indicates the largest MPLS frame (including the label stack) that fits on the interface to the downstream LSR.

When the value of tmnxOamP2mpLspTrMapP2mpBranch is true, the p2mpLspTrace response indicates that the responding router is a branch node of the P2MP LSP tree.

When the value of tmnxOamP2mpLspTrMapP2mpBud is true, the p2mpLspTrace response indicates that the responding router is a bud node of the P2MP LSP tree.

Defines a table for storing the results of an OAM p2mpLspTrace probe operation when a Downstream Mapping TLV was returned. Each row represents a single downstream label within a returned downstream L2 mapping TLV. An entry in this table is created when the result of an OAM p2mpLspTrace probe is determined. An entry is removed from this table when its corresponding tmnxOamTrCtlEntry is deleted.

Defines an entry in the tmnxOamP2mpLspTrDSLabelTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamLspTrMapEntry belongs to. The third index element identifies a OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Alcatel-Lucent SROS OAM Trace Route operation. The seventh index selects a single downstream L2 map entry within the specific probe reply. The eigth index selects seccessive downstream L2 label entries contained in a specific probe reply.

The tmnxOamP2mpLspTrDSLabelIndex selects a single downstream L2 label entry within a specific L2 mapping entry reply. The agent starts assigning tmnxOamP2mpLspTrDSLabelIndex values at 1.

The value of tmnxOamP2mpLspTrDSLabelLabel is the label used by the downstream router specified by this downstream L2 label entry.

The value of tmnxOamP2mpLspTrDSLabelProtocol is the signaling protocol used by the router for the label specified by this downstream L2 label entry.

tmnxOamEthCfmTrCtlTable contains Ethernet CFM-specific configuration information for ethCfmLinkTrace tests. This table extends the tmnxOamTrCtlTable. A row is automatically created in this table when a row in tmnxOamTrCtlTable has tmnxOamTrCtlTestMode set to ethCfmLinkTrace. Deleting a row in tmnxOamTrCtlTable automatically deletes the row (if any) with the same index values in tmnxOamEthCfmTrCtlTable. Test results are stored in tmnxOamTrResultsTable, tmnxOamTrProbeHistoryTable, tmnxOamTrHopsTable, and tmnxOamEthCfmTrPrHistTable.

tmnxOamEthCfmTrCtlEntry defines an entry in the tmnxOamEthCfmTrCtlTable. Each index is an object in tmnxOamTrCtlTable.

The value of tmnxOamEthCfmTrCtlTgtMacAddr specifies the target MAC address for the test.

The value of tmnxOamEthCfmTrCtlSrcMdIndex specifies the source CFM maintenance domain index for the test. Zero is the null CFM maintenance domain index.

The value of tmnxOamEthCfmTrCtlSrcMaIndex specifies the source CFM maintenance association index for the test. Zero is the null CFM maintenance association index.

The value of tmnxOamEthCfmTrCtlSrcMepId specifies the source Maintenance association End Point Identifier (MEP ID) for the test. Zero is the null MEP ID.

tmnxOamEthCfmTrPrHistTable contains Ethernet CFM-specific probe history for ethCfmLinkTrace tests. This table extends the tmnxOamTrProbeHistoryTable. A row is automatically created in this table when a row is created in tmnxOamTrProbeHistoryTable for a test with tmnxOamTrCtlTestMode set to ethCfmLinkTrace. Deleting a row in tmnxOamTrProbeHistoryTable automatically deletes the row (if any) with the same index values in tmnxOamEthCfmTrPrHistTable.

Defines an entry in the tmnxOamEthCfmTrPrHistTable. The indices are the same as the tmnxOamTrProbeHistoryTable indices.

The value of tmnxOamEthCfmTrPrHistIngressMac indicates the ingress MAC address of the probe.

The value of tmnxOamEthCfmTrPrHistEgressMac indicates the egress MAC address of the probe.

The value of tmnxOamEthCfmTrPrHistRelayAction indicates the value of the Relay Action field in the Link Trace Reply. unknown(0) is returned when a Link Trace Reply has not arrived, or the Relay Action field in the Link Trace Reply is outside the expected range.

The value of tmnxOamEthCfmTrPrHistForwarded indicates if a Link Trace Message was forwarded by the responding Maintenance Point (MP), as returned in the FwdYes flag of the Flags field of the Link Trace Reply.

The value of tmnxOamEthCfmTrPrHistTerminalMep indicates whether the forwarded Link Trace Message reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field of the Link Trace Reply.

Defines the Alcatel-Lucent SROS OAM SAA Control Table for providing, via SNMP, the capability of performing Alcatel-Lucent SROS OAM SAA test operations. The results of these tests are stored in the ping or trace route results tables.

Defines an entry in the tmnxOamSaaCtlTable. The first index element, tmnxOamSaaCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamSaaCtlTestIndex, enables the same management application to have multiple outstanding requests.

To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an owner index. Such an initial index has a syntax of SnmpAdminString, and can thus be trivially mapped to a security name or group name as defined in VACM, in accordance with a security policy. When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given users entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the column subidentifier) up to the end of the encoded owner index. To configure VACM to permit access to this portion of the table, one would create vacmViewTreeFamilyTable entries with the value of vacmViewTreeFamilySubtree including the owner index portion, and vacmViewTreeFamilyMask wildcarding the column subidentifier. More elaborate configurations are possible.

The test name index of the Alcatel-Lucent SROS OAM Service Assurance Agent, SAA, test. This is locally unique, within the scope of an tmnxOamSaaCtlOwnerIndex.

This object allows entries to be created and deleted in the tmnxOamSaaCtlTable. Deletion of an entry in this table results in all corresponding control and results entries in either the ping or traceroute tables. Activation of a Alcatel-Lucent SROS OAM ping or trace route operation is controlled via tmnxOamPingCtlAdminStatus or tmnxOamTrCtlAdminStatus and not by changing this objects value to active (1). An attempt to delete an entry in this table by setting this objects value to destroy (6) will fail with an inconsistentValue error if the associated ping or traceroute test is in progress. An attempt to delete an entry in this table by setting this objects value to destroy (6) will fail with an inconsistentValue error if the value of tmnxOamSaaCtlAdminStatus is not outOfService. The operational state of an Alcatel-Lucent SROS OAM SAA test operation can be determined by examination of its associated tmnxOamPingResultsOperStatus or tmnxOamTrResultsOperStatus object.

The storage type for this conceptual row. Conceptual rows having the value permanent need not allow write-access to any columnar objects in the row.

The value of tmnxOamSaaCtlLastChanged indicates the time the value of a settable object in this row was last changed.

The value of tmnxOamSaaCtlAdminStatus indicates the desired administrative state of the Service Assurance Agent, SAA, test. When the value of tmnxOamSaaCtlAdminStatus is outOfService, an attempt to start this SAA test by setting its associated tmnxOamPingCtlAdminStatus or tmnxOamTrCtlAdminStatus to enabled (1) will fail with an inconsistentValue error. When the value of tmnxOamSaaCtlAdminStatus is inService attempts to modify any other object in the associated tmnxOamPingCtlTable, tmnxOamTrCtlTable or the control table for the specific OAM test type will fail with an inconsistentValue error.

The value of tmnxOamSaaCtlDescr specifies a user provided description string for this SAA test. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.

The value of tmnxOamSaaCtlTestMode indicates the type of Service Assurance Agent (SAA) test to be performed. When the value of this object is notConfigured(0), no associated row exists in either the tmnxOamPingCtlTable or tmnxOamTrCtlTable. When the value of this object is ping(1), an associated row exists in the tmnxOamPingCtlTable. When the value of this object is traceroute(2), an associated row exists in the tmnxOamTrCtlTable.

The value of tmnxOamSaaCtlRuns indicates the number of times this OAM SAA test has been executed.

The value of tmnxOamSaaCtlFailures indicates the number of times this OAM SAA test has failed.

The value of tmnxOamSaaCtlLastRunResult indicates the completion status the last time this test was executed. If this OAM test is currently in progress, this object indicates the result of the previous test run, if any.

The value of tmnxOamSaaCtlAcctPolicyId specifies the accounting policy used to record the information obtained from the results tables. A value of zero (0) specifies no accounting policy.

The value of tmnxOamSaaCtlSuppressAccounting specifies whether or not the updating of accounting files is suppressed. The value of true (1) is applicable only when an accounting policy has been specified by tmnxOamSaaCtlAcctPolicyId. Upon completion of a test, this object is reset to its default value.

The value of tmnxOamSaaCtlContinuous specifies whether or not the OAM SAA test is to be executed indefinitely.

The value of tmnxOamSaaCtlKeepProbeHistoryAdm specifies whether or not per-probe history table rows will be created for this test. A test without per-probe history table rows consumes less CPM RAM. tmnxOamSaaCtlKeepProbeHistoryOpr is a read-only operational value derived from tmnxOamSaaCtlKeepProbeHistoryAdm. The bulk of the tmnxOamSaaCtlKeepProbeHistoryAdm semantics are described in the tmnxOamSaaCtlKeepProbeHistoryOpr DESCRIPTION clause. An attempt to set tmnxOamSaaCtlKeepProbeHistoryAdm to drop(2) when tmnxOamSaaCtlTestMode is not ping(1) returns an inconsistentValue error to the manager. When the SAA tests test mode is deconfigured (i.e. tmnxOamSaaCtlTestMode becomes notConfigured(0)), tmnxOamSaaCtlKeepProbeHistoryAdm returns to its default value.

The value of tmnxOamSaaCtlKeepProbeHistoryOpr indicates whether or not per-probe history table rows will be created for this test. A test without per-probe history table rows consumes less CPM RAM. The value of tmnxOamSaaCtlKeepProbeHistoryOpr is derived from the value of`tmnxOamSaaCtlKeepProbeHistoryAdm, as shown in the following table. tmnxOamSaaCtlKeepProbeHistoryAdm tmnxOamSaaCtlKeepProbeHistoryOpr -------------------------------- -------------------------------------- keep(1) keep(1) drop(2) drop(2) auto(3) keep(1) or drop(2), chosen by SROS The history table rows created for the combinations of tmnxOamSaaCtlKeepProbeHistoryOpr and tmnxOamSaaCtlTestMode values are shown in the following table. Configuration Options History Table Rows Created -------------------------- -------------------------- keep(1), ping(1) tmnxOamPingHistoryTable or tmnxOamMacPingHistoryTable keep(1), traceroute(2) tmnxOamTrProbeHistoryTable drop(2), ping(1) none drop(2), traceroute(2) unsupported combination. If tmnxOamSaaCtlTestMode is notConfigured(0), the value of tmnxOamSaaCtlKeepProbeHistoryOpr is insignificant, since a test without a test mode cannot be started. When a Get is performed on tmnxOamSaaCtlKeepProbeHistoryOpr in this case, keep(1) is returned. If tmnxOamSaaCtlKeepProbeHistoryAdm is auto(3): 1. tmnxOamSaaCtlKeepProbeHistoryOpr is drop(2) if a) the tests probe count is greater than 100, OR b) the tests interval is less than one second, OR c) tmnxOamSaaCtlTestMode is ping(1) AND the test is continuous (i.e. tmnxOamSaaCtlContinuous is true) AND an accounting policy is specified (i.e. tmnxOamSaaCtlAcctPolicyId is non- zero). 2. Otherwise, tmnxOamSaaCtlKeepProbeHistoryOpr is keep(1).

tmnxOamSaaThresholdTable contains notification threshold information for SAA tests.

Defines an entry in the tmnxOamSaaThresholdTable. The first index element, tmnxOamSaaCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamSaaCtlTestIndex, enables the same management application to have multiple outstanding requests. The third index element identifies the type of statistic to be monitored for threshold crossing. The fourth index element identifies which direction, rising or falling, to monitor.

The value of tmnxOamSaaTType specifies the type of monitored statistic used to determine if a tmnxOamSaaThreshold notification is generated at the completion of an SAA test run.

The value of tmnxOamSaaTDirection specifies whether to monitor this threshold for crossing in the rising or falling direction.

The value of tmnxOamSaaTRowStatus controls creation and deletion of row entries in the tmnxOamSaaThresholdTable. When a row in this table is created, tmnxOamSaaTThreshold must also be set or the row creation will fail with an inconsistentValue error.

The value of tmnxOamSaaTLastChanged indicates the last time the value of tmnxOamSaaTThreshold was modified.

The value of tmnxOamSaaTThreshold specifies the threshold value to monitor to determine when to generate a tmnxOamSaaThreshold notification. A threshold value must be set when the row entry is created.

The value of tmnxOamSaaTValue indicates the value of the statistic that last caused a tmnxOamSaaThreshold notification to be generated.

The value of tmnxOamSaaTLastSent indicates the last time a tmnxOamSaaThreshold notification was generated as a result of crossing the threshold specified by the value of tmnxOamSaaTThreshold.

The value of tmnxOamSaaTTestMode indicates the type of Service Assurance Agent, SAA, test for which a tmnxOamSaaThreshold notification was generated as a result of crossing the threshold specified by the value of tmnxOamSaaTThreshold. When the value of this object is notConfigured, no associated entry exists in either the tmnxOamPingCtlTable or tmnxOamTrCtlTable. When the value of this object is ping, an associated test entry is configured in the tmnxOamPingCtlTable. When the value of this object is traceroute, an associated test entry is configured in the tmnxOamTrCtlTable.

The value of tmnxOamSaaTTestRunIndex indicates the test run index of the Service Assurance Agent, SAA, test for which the last tmnxOamSaaThreshold notification was generated as a result of crossing the threshold specified by the value of tmnxOamSaaTThreshold. When the value of tmnxOamSaaTTestMode is ping, the value of this object is the value of the tmnxOamPingResultsTestRunIndex that identifies entries for the ping test results of the test run that generated the last tmnxOamSaaThreshold notification. When the value of tmnxOamSaaTTestMode is traceroute, the value of this object is the value of the tmnxOamTrResultsTestRunIndex that identifies entries for the traceroute test results of the test run that generated the last tmnxOamSaaThreshold notification. When the value of tmnxOamSaaTTestMode is notConfigured, the value of this object is zero.

Defines the Alcatel 7x50 SR OAM VPRN Ping Control Table for providing, via SNMP, the capability of performing Alcatel 7x50 SR OAM mobGtpPing test operations. The results of these tests are stored in the tmnxOamPingResultsTable and the tmnxOamTrProbeHistoryTable. There will be no entries for these test in the tmnxOamPingHistoryTable.

Defines an entry in the tmnxOamMobGtpPingCtlTable. The first index element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows a management application to identify its entries. The second index, tmnxOamPingCtlTestIndex, enables the same management application to have multiple outstanding requests.

The value of tmnxOamMobGtpPingRefPointType specifies the reference point type. This object is required.

The value of tmnxOamMobGtpPingVRtrId specifies the virtual router. This object is required.

The value of tmnxOamMobGtpPingPort specifies the port number of the destination. This object is required.

The value of tmnxOamMobGtpPingGateway specifies the mobile gateway id. This object is required.

The value of tmnxOamMplsPduTimeStampFormat specifies, on a system-wide basis: a) the format of the time stamp to be written into an RFC 4379 MPLS Echo Request PDU, when initiating a ping or trace route test, and b) the format of the time stamp to be written into an RFC 4379 MPLS Echo Reply PDU, when replying to an incoming MPLS Echo Request PDU, and c) the format to use when decoding the time stamps in an incoming MPLS Echo Request or MPLS Echo Reply PDU. rfc4379(0) specifies the RFC 4379 time stamp format. The time stamps seconds field holds the integral number of seconds since 1-Jan-1900 00:00:00 UTC. The time stamps microseconds field contains a microseconds value in the range 0..999999. This setting is used to interoperate with network elements which are fully compliant with RFC 4379 (e.g. an SROS system with the same setting, or any other RFC 4379 compliant router). unix(1) specifies the Unix time stamp format. The time stamps seconds field holds a Unix time, i.e. the integral number of seconds since 1-Jan-1970 00:00:00 UTC. The time stamps microseconds field contains a microseconds value in the range 0..999999. This setting is used to interoperate with network elements which send and expect a 1970-based timestamp in MPLS Echo Request/Reply PDUs (e.g. an SROS system with the same setting, or an SROS system running software earlier than R8.0 R4). Prior to SROS Release 8.0 R4, this object was not supported. The Unix time stamp format was always used. This object is applicable for the ldpTreeTrace, lspPing, lspTraceRoute, p2mpLspPing, p2mpLspTrace, vccvPing, and vccvTraceRoute test modes only.

The value of tmnxOamSysPerfOprLimitTx indicates this nodes upper bound on the total echo request packet transmission rate. Echo reply packets are not affected by this limit. The upper bound applies to echo request packets sent by the following test types: 1. SDP keep-alive. 2. Static route CPE check. 3. Filter redirect policy ping test. 4. VRRP policy host unreachable ping test. 5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB.

The value of tmnxOamSysPerfCfgLimitTx indicates this nodes upper bound on the total configured echo request packet transmission rate for a set of test types. The upper bound is enforced to avoid echo request packet transmit overload, i.e. to ensure each enabled test can transmit echo request packets at the tests configured rate. Echo reply packets are not affected by this limit. The upper bound applies to echo request packets sent by the following always on test types: 1. SDP keep-alive. 2. Static route CPE check. 3. Filter redirect policy ping test. 4. VRRP policy host unreachable ping test. 5. SAA continuous test (see tmnxOamSaaCtlContinuous). For example, suppose: a) tmnxOamSysPerfCfgLimitTx has the value 4000 echo request packets per second, and b) several SDP keep-alive sessions are enabled, totalling 1000 echo request packets per second, and c) several SAA continuous tests are enabled, totalling 3000 echo request packets per second. Then, an attempt to enable an additional SAA continuous test would be rejected with a resourceUnavailable(13) error.

The value of tmnxOamSysPerfCfgTotalTx indicates this nodes current total configured echo request packet transmission rate, for the set of tests listed in the tmnxOamSysPerfCfgLimitTx DESCRIPTION clause. For example, suppose: a) several SDP keep-alive sessions are enabled, totalling 1000 echo request packets per second, and b) several SAA continuous tests are enabled, totalling 2000 echo request packets per second, and c) no other relevant tests are enabled. Then, tmnxOamSysPerfCfgTotalTx will have the value 3000. The value of tmnxOamSysPerfCfgTotalTx will not exceed the value of tmnxOamSysPerfCfgLimitTx.

The value of tmnxOamSysPerfLastClearedTime indicates the sysUpTime when the following statistics were cleared: tmnxOamSysPerfLocalTestTx, tmnxOamSysPerfRemoteTestRx, and tmnxOamSysPerfReqTypeTable. If the statistics have not been cleared since the last CPM restart, zero is returned. A packet count which is time stamped by this object can be converted to an average packets per second value using, for example, pps = tmnxOamSysPerfLocalTestTx / [(sysUpTime - tmnxOamSysPerfLastClearedTime)/100].

The value of tmnxOamSysPerfLocalTestTx indicates this nodes total number of echo request packets transmitted by locally initiated tests (since the last clear). The test types are listed in the tmnxOamSysPerfOprLimitTx DESCRIPTION clause.

The value of tmnxOamSysPerfRemoteTestRx indicates this nodes total number of echo request packets received from remotely initiated tests (since the last clear).

tmnxOamSysPerfReqTypeTable has a row for each relevant OAM echo request packet type. Each row contains packet counters.

Rows in tmnxOamSysPerfReqTypeTable are system-generated at CPM restart. Rows cannot be created or destroyed using SNMP.

The value of tmnxOamSysPerfReqTypeName specifies the name of an echo request packet type (e.g. ICMP). The name is the index for the row.

The value of tmnxOamSysPerfReqTypeLocalTestTx indicates the number of echo request packets transmitted by locally initiated tests (since the last clear) for the echo request packet type specified by tmnxOamSysPerfReqTypeName.

The value of tmnxOamSysPerfReqTypeRemoteTstRx indicates the number of echo request packets received from remotely initiated tests (since the last clear) for the echo request packet type specified by tmnxOamSysPerfReqTypeName.

The value of tmnxOamSysSessionLimit indicates the maximum number of OAM sessions available on this node. OAM sessions are allocated and freed as described in the tmnxOamSysSessionCount DESCRIPTION clause.

The value of tmnxOamSysSessionCount indicates the number of OAM sessions currently allocated on this node. One OAM session is allocated when a test is configured (in the case of some test types) or activated (in the remaining cases). Tests with the following test types allocate OAM sessions: 1. SDP keep-alive. 2. Static route CPE check. 3. Filter redirect policy ping test. 4. VRRP policy host unreachable ping test. 5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB. The session is freed when the test is deactivated or deleted. tmnxOamSysSessionCount will not exceed tmnxOamSysSessionLimit. Configuration or activation of a test will fail when tmnxOamSysSessionCount equals tmnxOamSysSessionLimit.

The value of tmnxOamMplsEchoDownstreamMapTlv specifies the system value for the type of downstream map TLV to be inserted when launching MPLS echo requests. The value of tmnxOamMplsEchoDownstreamMapTlv is used on three occasions: 1. When a background LDP tree trace test is started (using tmnxOamLTtraceAutoAdminState), the value of tmnxOamMplsEchoDownstreamMapTlv specifies the type of downstream map TLV used during the test. 2. When a test of type lspTraceRoute is created, with no value specified for the tests tmnxOamLspTrCtlDownstreamMapTlv object, tmnxOamLspTrCtlDownstreamMapTlv is set to the value of tmnxOamMplsEchoDownstreamMapTlv. 3. When a test of type ldpTreeTrace is created, with no value specified for the tests tmnxOamLTtraceCtlDownstreamMpTlv object, tmnxOamLTtraceCtlDownstreamMpTlv is set to the value of tmnxOamMplsEchoDownstreamMapTlv. Example usage, for the second and third cases: suppose every node in this nodes network supports the MPLS Echo Request/Reply DDMAP TLV, and the network operator wishes to use the enhanced functionality offered by the DDMAP TLV. Then, setting tmnxOamMplsEchoDownstreamMapTlv to ddmap(2) simplifies configuration. The simplification: the tmnxOamLspTrCtlDownstreamMapTlv and tmnxOamLTtraceCtlDownstreamMpTlv objects need not be set when creating tests.

Generated when a probe failure is detected when the corresponding tmnxOamPingCtlTrapGeneration object is set to probeFailure(0) subject to the value of tmnxOamPingCtlTrapProbeFailureFilter. The object tmnxOamPingCtlTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.

Generated when a ping test is determined to have failed when the corresponding tmnxOamPingCtlTrapGeneration object is set to testFailure(1). In this instance tmnxOamPingCtlTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.

Generated at the completion of a ping test when the corresponding tmnxOamPingCtlTrapGeneration object is set to testCompletion(2).

Generated when a probe failure is detected when the corresponding tmnxOamPingCtlTrapGeneration object is set to probeFailure(0) subject to the value of tmnxOamPingCtlTrapProbeFailureFilter. The object tmnxOamPingCtlTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.

Generated when a ping test is determined to have failed when the corresponding tmnxOamPingCtlTrapGeneration object is set to testFailure(1). In this instance tmnxOamPingCtlTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.

Generated at the completion of a ping test when the corresponding tmnxOamPingCtlTrapGeneration object is set to testCompletion(2).

This Notification is sent whenever a ANCP loopback is finished for which a notification was explictly requested.

[CAUSE] The tmnxOamPingProbeFailedV3 notification is sent at the end of an OAM or SAA test run, when a sufficient number of successive probes failed. The notification is sent if both of the following conditions are met: 1. The probeFailure(0) bit of the tmnxOamPingCtlTrapGeneration BITS object is enabled, AND 2. The test run includes at least one occurrence of N successive probe failures, where N is configured using tmnxOamPingCtlTrapProbeFailureFilter. This notification is sent at most once per test run. [EFFECT] Informational. The probe failures may indicate a problem with live traffic flow. [RECOVERY] Investigate the cause of the probe failures.

Generated when a ping test is determined to have failed when the corresponding tmnxOamPingCtlTrapGeneration object is set to testFailure(1). In this instance tmnxOamPingCtlTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.

Generated at the completion of a ping test when the corresponding tmnxOamPingCtlTrapGeneration object is set to testCompletion(2).

The path to a target has changed.

The OAM trace route test failed to complete successfully.

The OAM trace route test has just been completed.

The tmnxOamLdpTtraceAutoDiscState notification is generated when the discovery state of the Auto LDP Tree Trace entity represented by tmnxOamLTtraceAutoDiscoveryState has been changed.

The tmnxOamLdpTtraceFecProbeState notification is generated when the probe state of the auto discovered FEC has been changed.

The tmnxOamLdpTtraceFecDisStatus notification is generated when the discovery status BITS or the number of discovered paths of the auto discovered FEC has been changed. Note that the changes are evaluated at the end of a FEC discovery.

The tmnxOamLdpTtraceFecPFailUpdate notification is generated when there is a probe state change in any of the relevant discovered paths while the overall FEC probe state, tmnxOamLTtraceFecProbeState is in partially failed state.

Generated at the completion of an SAA OAM trace route test when a threshold has been crossed for a results statistic.