TIMETRA-LDP-NG-MIB: View SNMP OID List / Download MIB

The MIB module to manage and provision the Nokia SROS LDP NG protocol features. Copyright 2013-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.

The compliance statement for management of extended LDP on Nokia SROS series systems 12.0 release.

The compliance statement for management of extended LDP on Nokia SROS series systems 13.0 release.

The compliance statement for management of extended LDP on Nokia SROS series systems 14.0 release.

The group of objects supporting general management of extended LDP interfaces on Nokia SROS series systems 12.0 release.

The group of objects supporting management of extended LDP Adjacencies for LDP sessions on Nokia SROS series systems 12.0 Release.

The group of objects supporting management of extended LDP Sessions on Nokia SROS series systems 12.0 Release.

The group of objects supporting management of extended LDP Session statistics on Nokia SROS series systems 12.0 Release.

The group of objects supporting management of extended LDP interfaces and targeted peers on Nokia SROS series systems 12.0 release.

The group of objects supporting Address FEC's on Nokia SROS series systems 12.0 Release.

The group of objects supporting P2MP FEC's on Nokia SROS series systems 12.0 Release.

The group of objects supporting management of extended LDP service FECs sent to or received from an LDP peer on Nokia SROS series systems release 12.0.

The group of objects supporting management of LDP FEC-129s sent to or received from an LDP peer on Nokia SROS series systems release 12.0.

The group of objects supporting management of extended LDP CEP/TDM FECs sent to or received from an LDP peer on Nokia SROS series systems release 12.0.

The group of objects supporting management of LDP Static FECs on Nokia SROS series systems 12.0 release.

The group of objects supporting management of extended LDP targetted peer on Nokia SROS series systems release 12.0.

The group of objects supporting management of extended LDP Inet family interfaces on Nokia SROS series systems release 12.0.

The group of objects supporting management of extended LDP statistics on Nokia SROS series systems release 12.0.

The group of objects supporting management of extended LDP capabilities on Nokia SROS series systems release 12.0.

The group of objects supporting management of extended LDP TCP session parameters on Nokia SROS series systems release 12.0.

The group of objects supporting general management of extended LDP on Nokia SROS series systems 12.0 release.

The group of objects supporting policies of extended LDP protocol on Nokia SROS series systems 12.0 release.

The group of objects supporting interface parameters of extended LDP on Nokia SROS series systems 12.0 release.

The group of objects supporting Targeted Peers of extended LDP on Nokia SROS series systems 12.0 release.

The group of objects supporting Aggregate Prefix Match policies of extended LDP on Nokia SROS series systems 12.0 release.

The group of notifications supporting LSR FEC limit per LDP peer feature on Nokia SROS series systems.

The group of notifications supporting LSR FEC limit per LDP peer feature on Nokia SROS series systems.

The group of objects supporting management of extended LDP interfaces and targeted peers on Nokia SROS series systems 13.0 release.

The group of objects supporting management of extended LDP TCP session parameters on Nokia SROS series systems release 13.0.

The group of objects supporting LDP fec-limit notification on Nokia SROS series systems.

The group of objects supporting management of extended LDP Hello Adjacencies on Nokia SROS series systems release 13.0.

The group of objects supporting management of extended LDP targetted peer on Nokia SROS series systems release 13.0.

The group of objects supporting management of extended LDP Inet family interfaces on Nokia SROS series systems release 13.0.

The group of objects supporting Active Address FEC's on Nokia SROS series systems 13.0.

The group of objects supporting general management of extended LDP on Nokia SROS series systems 13.0 release.

The group of objects supporting Active Address FEC's on Nokia SROS series systems 13.0.

The group of objects supporting general management of extended LDP on Nokia SROS series systems 14.0 release.

The group of objects supporting management of extended LDP targetted peer on Nokia SROS series systems release 14.0.

The group of objects supporting general management of extended LDP interfaces on Nokia SROS series systems 14.0 release.

The group of objects supporting general management of extended LDP fast re-route on Nokia SROS series systems 14.0 release.

The group of objects supporting general management of End of Label Information Base Notifications on Nokia SROS series systems 14.0 release.

The group of objects supporting general management of interoperability with legacy IPv4 LSR implementations on Nokia SROS series systems 14.0 release.

The value of vRtrLdpNgIfTableLstChanged indicates the last timestamp when an entry in the vRtrLdpNgIfTable was last changed.

The vRtrLdpNgIfTable provides an entry for each virtual router interface configured to be used with the Label Distribution Protocol (LDP).

Each row entry represents an interface on this virtual router that participates in the LDP protocol. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgIfRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgIfRowStatus to 'destroy'.

The value of vRtrLdpNgIfIndex specifies the interface index.

vRtrLdpNgIfRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgIfTable. A row can be created by setting vRtrLdpNgIfRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. A row entry can be destroyed by setting vRtrLdpNgIfRowStatus to 'destroy'.

The value of vRtrLdpNgIfLastChange indicates the sysUpTime when this row was last modified.

The value of vRtrLdpNgIfAdminState specifies the desired administrative state for LDP on this interface.

The value of vRtrLdpNgIfOperState indicates the current operational state of LDP of this interface

The value of vRtrLdpNgIfOperDownReason indicates the reason that the LDP interface is operationally down.

The value of vRtrLdpNgIfBfdEnabled specifies whether BFD tracking is enabled to hello adjacency source address of the peer. When multiple links exist to the same LDP peer, a Hello adjacency is established over each link and a separate BFD session is enabled on each LDP interface. If there are any FEC resolved over this interface, LDP will enable BFD tracking to each next hop. When this object has a value of 'ipv4', BFD tracking is enabled to each resolved ipv4 FEC next hop and or ipv4 hello adjacency over this interface. When this object has a value of 'ipv6', BFD tracking is enabled to each resolved ipv6 FEC next hop and or ipv6 hello adjacency over this interface. In case FEC next hop and hello adjacency source address of the peer is same, only one BFD session is used to track both. When this object has value of 0, BFD tracking is disabled. Bits: 'ipv4': 0, 'ipv6': 1.

The vRtrLdpNgHelloAdjTable is a read-only table which has information about Hello Adjacencies for Sessions. A hello adjacency can be associated with an LDP interface or with a targeted peer.

Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies. vRtrLdpNgIfIndex and vRtrLdpNgPeerAddress are mutually exclusive fields. When vRtrLdpNgIfIndex is non zero, vRtrLdpNgPeerAddressType will have value of IPv4 and vRtrLdpNgPeerAddress will be 0.0.0.0. When the value of vRtrLdpNgPeerAddress is non zero, vRtrLdpNgIfIndex will be 0.

The object vRtrLdpNgPeerLdpIdType is an index for the row entry. It indicates the LDP identifier type of the peer indicated by vRtrLdpNgPeerLdpId.

The object vRtrLdpNgPeerLdpId is an index for the row entry. It indicates the LDP identifier of the peer.

The value of vRtrLdpNgHelloAdjLclLdpIdType indicates the local LDP identifier type for this specific adjacency indicated by vRtrLdpNgHelloAdjLclLdpId .

The value of vRtrLdpNgHelloAdjLclLdpId indicates the local LDP identifier for this specific adjacency.

The value of vRtrLdpNgHelloAdjEntityIndex indicates the Entity index which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry.

The value of vRtrLdpNgHelloAdjIndex indicates the Hello adjacency index which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry.

The value of vRtrLdpNgHelloAdjHoldTimeRem indicates the hold time remaining for this Hello Adjacency. This interval will change when the next Hello message which corresponds to this Hello Adjacency is received.

The value of vRtrLdpNgHelloAdjType indicates the type of this Hello Adjacency. If this value is 'link' then this adjacency is a result of a Link Hello. If this value is 'hello', then the adjacency is a result of a Targeted Hello.

The value of vRtrLdpNgHelloAdjRemConfSeqNum indicates the Configuration sequence number that was in the Hello received when this adjacency started up. This configuration sequence number changes when there is a change of configuration.

The value of vRtrLdpNgHelloAdjRemIpAddrType indicates the type of address indicated by vRtrLdpNgHelloAdjRemIpAddress.

The value of vRtrLdpNgHelloAdjRemIpAddress indicates the peer IP address of the interface/targeted session that sent hellos for this specific adjacency.

The value of vRtrLdpNgHelloAdjUpTime indicates the time that this adjacency has been up.

The value of vRtrLdpNgHelloAdjLclConfSeqNum indicates the Configuration sequence number that was used in the Hello sent when this adjacency started up. This configuration sequence number changes when there is a change of configuration.

The value of vRtrLdpNgHelloAdjLclIpAddrType indicates the type of address indicated by vRtrLdpNgHelloAdjLclIpAddress.

The value of vRtrLdpNgHelloAdjLclIpAddress indicates the local IP address of the interface/targeted session used in Hellos sent for this specific adjacency.

The value of vRtrLdpNgHelloAdjInHelloMsgCnt indicates the number of Hello messages that have been received for this adjacency.

The value of vRtrLdpNgHelloAdjOutHelloMsgCnt indicates the number of Hello messages that have been sent for this adjacency.

The value of vRtrLdpNgHelloAdjLclTimeout indicates the hello timeout used in the Hellos sent for this specific adjacency.

The value of vRtrLdpNgHelloAdjRemTimeout indicates the hello timeout used by the remote end that sent Hellos for this specific adjacency.

The value of vRtrLdpNgHelloAdjBfdStatus indicates the BFD operational status for LDP hello adjacency. If the value of vRtrLdpNgHelloAdjBfdStatus is 'noService', BFD is not enabled for LDP hello adjacency. If the value of the object is 'outOfService', BFD is enabled but it is down and not running. If the value of object is 'inService', BFD is enabled and it is running. Enumeration: 'outOfService': 3, 'inService': 2, 'noService': 1.

The value of vRtrLdpNgHelloAdjLclIPv4P2MPCap indicates whether the local peer supports traffic exchange for IPv4 P2MP FECs.

The value of vRtrLdpNgHelloAdjRemIPv4P2MPCap indicates whether the remote peer supports traffic exchange for IPv4 P2MP FECs. When the 'ipv4P2MPFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv, this will be 'true'. Otherwise, it will be value sent by the peer LSR.

The value of vRtrLdpNgHelloAdjLclIPv6P2MPCap indicates whether the local peer supports traffic exchange for IPv6 P2MP FECs.

The value of vRtrLdpNgHelloAdjRemIPv6P2MPCap indicates whether the remote peer supports traffic exchange for IPv6 P2MP FECs. When the 'ipv6P2MPFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv, this will be 'true'. Otherwise, it will be value sent by the peer LSR.

The value of vRtrLdpNgHelloAdjLclIPv4PfxCap indicates whether the local peer supports traffic exchange for IPv4 Prefix FECs.

The value of vRtrLdpNgHelloAdjRemIPv4PfxCap indicates whether the remote peer supports traffic exchange for IPv4 Prefix FECs. When the 'ipv4PfxFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv, this will be 'true'. Otherwise, it will be value sent by the peer LSR.

The value of vRtrLdpNgHelloAdjLclIPv6PfxCap indicates whether the local peer supports traffic exchange for IPv6 Prefix FECs.

The value of vRtrLdpNgHelloAdjRemIPv6PfxCap indicates whether the remote peer supports traffic exchange for IPv6 Prefix FECs. When the 'ipv6PfxFec' bit is not set in object vRtrLdpNgHelloAdjPeerCapRecv, this will be 'true'. Otherwise, it will be value sent by the peer LSR.

The value of vRtrLdpNgHelloAdjPeerCapRecv indicates various capabilities signaled by the peer LSR in a hello message. A particular capability bit will be set to 1 when the peer sent capability info in at least one of its hello message. Bits: 'ipv4P2MPFec': 2, 'ipv4PfxFec': 0, 'ipv6PfxFec': 1, 'ipv6P2MPFec': 3.

The vRtrLdpNgSessionTable is a read-only table which parallels the mplsLdpSessionTable in the MPLS-LDP-MIB. The purpose of this table is to keep information about a single session between an LDP entity and an LDP Peer.

A row in this table represents information about a single session between an LDP entity and an LDP Peer.

The value of vRtrLdpNgSessLocalLdpIdType indicates the local LDP identifier type for the LDP session indicated by vRtrLdpNgSessLocalLdpId.

The value of vRtrLdpNgSessLocalLdpId indicates the local LDP identifier for this LDP session.

The value of vRtrLdpNgSessEntityIndex indicates the Entity index for the LDP entity represented in this session.

The value of vRtrLdpNgSessLabelDistMethod indicates the label distribution method used for this LDP session.

The value of vRtrLdpNgSessLoopDetectForPV indicates whether loop detection based on path vectors is disabled or enabled for this LDP session. If this object has a value of disabled(0), then loop detection is disabled. Otherwise, if this object has a value of enabled(1), then loop detection based on path vectors is enabled. Enumeration: 'disabled': 0, 'enabled': 1.

If the value of vRtrLdpNgSessLoopDetectForPV for this entry is 'enabled', then the value of vRtrLdpNgSessPathVectorLimit represents the Path Vector Limit for this LDP Session. If the value of vRtrLdpNgSessLoopDetectForPV for this entry is 'disabled', then the value of vRtrLdpNgSessPathVectorLimit be 0 (zero).

The value of vRtrLdpNgSessState indicates the current state of the LDP session. All of the states 1 - 5 are based on the state machine for session negotiation behavior. Enumeration: 'initialized': 2, 'opensent': 4, 'openrec': 3, 'nonexistent': 1, 'operational': 5.

The value of vRtrLdpNgSessAdjacencyType indicates the adjacency type(s) supporting this LDP Session.

The value of vRtrLdpNgSessProtocolVersion indicates the version of the LDP Protocol used by this session.

The value of vRtrLdpNgSessLocalUdpPort indicates the UDP port used locally for LDP discovery.

The value of vRtrLdpNgSessPeerUdpPort indicates the UDP port used on the remote end for LDP discovery.

The value of vRtrLdpNgSessLocalTcpPort indicates the TCP port used locally for the LDP Session.

The value of vRtrLdpNgSessPeerTcpPort indicates the TCP port used on the remote end for the LDP Session.

The value of vRtrLdpNgSessLocalAddrType indicates the type of address indicated by vRtrLdpNgSessLocalAddress.

The value of vRtrLdpNgSessLocalAddress indicates the IP address used locally for the LDP Session.

The value of vRtrLdpNgSessPeerAddrType indicates the type of address indicated by vRtrLdpNgSessPeerAddress.

The value of vRtrLdpNgSessPeerAddress indicates the IP address used on the remote end for the LDP Session.

The value of vRtrLdpNgSessKAHoldTimeRemaining indicates the keep alive hold time remaining for this LDP session.

The value of vRtrLdpNgSessMaxPduLength indicates the maximum allowable length for LDP PDUs for this session. This value may have been negotiated during Session Initialization.

The value of vRtrLdpNgSessUpTime indicates the time since the session was established.

The value of vRtrLdpNgSessLocalKATimeout indicates the keepalive timeout used locally for the LDP Session.

The value of vRtrLdpNgSessPeerKATimeout indicates the keepalive timeout used at the remote end of the LDP Session.

The value of vRtrLdpNgSessAdvertise indicates the type of FECs that will be transported by the session. Enumeration: 'addressAndService': 3, 'service': 2, 'address': 1.

The value of vRtrLdpNgSessLclGRHelperState indicates whether the local entity of this session is graceful restart helper capable or not.

The value of vRtrLdpNgSessPeerGRState indicates whether the peer entity of this session is capable of supporting graceful restart.

The value of vRtrLdpNgSessPeerNumRestart indicates the number of times graceful restart helper was initiated for this session.

The value of vRtrLdpNgSessLastRestartTime indicates the last time graceful restart helper was initiated.

The value of vRtrLdpNgSessLocalFtReconTime indicates the session's local entity Fault Tolerant(FT) Reconnect Timeout.

The value of vRtrLdpNgSessPeerFtReconTime indicates the session's peer entity Fault Tolerant(FT) Reconnect Timeout.

The value of vRtrLdpNgSessLocalFtRecovTime indicates the session's local entity Fault Tolerant(FT) recovery timeout.

The value of vRtrLdpNgSessPeerFtRecovTime indicates the session's peer entity Fault Tolerant(FT) recovery timeout.

The value of vRtrLdpNgSessFtReconTimeRem indicates the amount of time left before session's Fault Tolerant(FT) reconnect timeout expires. This value is set to lesser of the neighbor advertised FT recovery timeout, vRtrLdpNgSessPeerFtRecovTime and the local recovery timeout, vRtrLdpNgSessLocalFtRecovTime.

The value of vRtrLdpNgSessFtRecovTimeRem indicates the amount of time left before session's Fault Tolerant(FT) recovery timeout expires. This value is set to lesser of the neighbor advertised FT recovery timeout, vRtrLdpNgSessPeerFtRecovTime and the local recovery timeout, vRtrLdpNgSessLocalFtRecovTime.

The value of vRtrLdpNgSessBfdStatus indicates the BFD operational status for the LDP session. If the value of vRtrLdpNgSessBfdStatus is 'noService', BFD is not enabled for the LDP session. If the value of the object is 'outOfService', BFD is enabled but it is down and not running. If the value of object is 'inService', BFD is enabled and it is running. Enumeration: 'outOfService': 3, 'inService': 2, 'noService': 1.

The value of vRtrLdpNgSessLocalP2MPCap indicates whether the local entity of this session is capable of exchanging P2MP FECs.

The value of vRtrLdpNgSessPeerP2MPCap indicates whether the peer entity of this session is capable of exchanging P2MP FECs.

The value of vRtrLdpNgSessLocalMPMBBCap indicates whether the local entity of this session is capable of Multipoint MBB.

The value of vRtrLdpNgSessPeerMPMBBCap indicates whether the peer entity of this session is capable of Multipoint MBB.

The value of vRtrLdpNgSessLocalDynCap indicates whether the local entity of this session supports negotiation of LDP session capabilities dynamically.

The value of vRtrLdpNgSessPeerDynCap indicates whether the peer entity of this session supports negotiation of LDP session capabilities dynamically.

The value of vRtrLdpNgSessLocalOLoadCap indicates whether the local entity of this session is capable of signaling LSR Overload Notification.

The value of vRtrLdpNgSessPeerOLoadCap indicates whether the peer entity of this session is capable of signaling LSR Overload Notification.

The value of vRtrLdpNgSessIPv4PfxFecOLoadSent indicates whether LSR Overload Notification has been sent to the LDP peer for IPv4 Prefix FEC Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for IPv4 Prefix FEC type and is not ready to receive new Label Mappings for IPv4 Prefix FEC Type. In this state if a Label Mapping Message is received from peer for any IPv4 Prefix FEC type then the Label is returned with a Label Release Message.

The value of vRtrLdpNgSessIPv6PfxFecOLoadSent indicates whether LSR Overload Notification has been sent to the LDP peer for IPv6 Prefix FEC Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for IPv6 Prefix FEC type and is not ready to receive new Label Mappings for IPv6 Prefix FEC Type. In this state if a Label Mapping Message is received from peer for any IPv6 Prefix FEC type then the Label is returned with a Label Release Message.

The value of vRtrLdpNgSessIPv4PfxFecOLoadRecv indicates whether LSR Overload Notification has been received from the LDP peer for IPv4 Prefix FEC Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for IPv4 Prefix FEC type and is not ready to receive new Label Mappings for any IPv4 Prefix FEC Type. In this state no new Label Mapping Message would be sent to peer for any IPv4 Prefix FEC Type.

The value of vRtrLdpNgSessIPv6PfxFecOLoadRecv indicates whether LSR Overload Notification has been received from the LDP peer for IPv6 Prefix FEC Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for IPv6 Prefix FEC type and is not ready to receive new Label Mappings for any IPv6 Prefix FEC Type. In this state no new Label Mapping Message would be sent to peer for any IPv6 Prefix FEC Type.

The value of vRtrLdpNgSessIPv4P2MPFecOLSent indicates whether LSR Overload Notification has been sent to the LDP peer for IPv4 P2MP FEC Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for IPv4 P2MP FEC type and is not ready to receive new Label Mappings for IPv4 P2MP FEC Type. In this state if a Label Mapping Message is received from peer for IPv4 P2MP FEC type then the Label is returned with a Label Release Message.

The value of vRtrLdpNgSessIPv6P2MPFecOLSent indicates whether LSR Overload Notification has been sent to the LDP peer for IPv6 P2MP FEC Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for IPv6 P2MP FEC type and is not ready to receive new Label Mappings for IPv6 P2MP FEC Type. In this state if a Label Mapping Message is received from peer for IPv6 P2MP FEC type then the Label is returned with a Label Release Message.

The value of vRtrLdpNgSessIPv4P2MPFecOLRecv indicates whether LSR Overload Notification has been received from the LDP peer for IPv4 P2MP FEC Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for IPv4 P2MP FEC type and is not ready to receive new Label Mappings for IPv4 P2MP FEC Type. In this state no new Label Mapping Message would be sent to peer for IPv4 P2MP FEC Type.

The value of vRtrLdpNgSessIPv6P2MPFecOLRecv indicates whether LSR Overload Notification has been received from the LDP peer for IPv6 P2MP FEC Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for IPv6 P2MP FEC type and is not ready to receive new Label Mappings for IPv6 P2MP FEC Type. In this state no new Label Mapping Message would be sent to peer for IPv6 P2MP FEC Type.

The value of vRtrLdpNgSessSvcFec128OLoadSent indicates whether LSR Overload Notification has been sent to the LDP peer for Service FEC 128 Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for Service FEC 128 type and is not ready to receive new Label Mappings for Service FEC 128 Type. In this state if a Label Mapping Message is received from peer for Service FEC 128 type then the Label is returned with a Label Release Message.

The value of vRtrLdpNgSessSvcFec128OLoadRecv indicates whether LSR Overload Notification has been received from the LDP peer for Service FEC 128 Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for Service FEC 128 type and is not ready to receive new Label Mappings for Service FEC 128 Type. In this state no new Label Mapping Message would be sent to peer for any Service FEC 128 Type.

The value of vRtrLdpNgSessSvcFec129OLoadSent indicates whether LSR Overload Notification has been sent to the LDP peer for Service FEC 129 Type. The value of 'true' indicates that Local LSR has set the LDP session as overloaded for Service FEC 129 type and is not ready to receive new Label Mappings for any Service FEC 129 Type. In this state if a Label Mapping Message is received from peer for Service FEC 129 type then the Label is returned with a Label Release Message.

The value of vRtrLdpNgSessSvcFec129OLoadRecv indicates whether LSR Overload Notification has been received from the LDP peer for Service FEC 129 Type. The value of 'true' indicates that Peer LSR has set the LDP session as overloaded for Service FEC 129 type and is not ready to receive new Label Mappings for any Service FEC 129 Type. In this state no new Label Mapping Message would be sent to peer for any Service FEC 129 Type.

The value of vRtrLdpNgSessLocalIPv4PfxFecCap indicates whether the local entity of this session is capable of exchanging IPv4 FECs.

The value of vRtrLdpNgSessPeerIPv4PfxFecCap indicates whether the peer entity of this session is capable of exchanging IPv4 FECs. When the 'ipv4PfxFec' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be the value sent by the peer LSR.

The value of vRtrLdpNgSessLocalIPv6PfxFecCap indicates whether the local entity of this session is capable of exchanging IPv6 FECs.

The value of vRtrLdpNgSessPeerIPv6PfxFecCap indicates whether the peer entity of this session is capable of exchanging IPv6 FECs. When the 'ipv6PfxFec' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be the value sent by the peer LSR.

The value of vRtrLdpNgSessLocalSvcFec128Cap indicates whether the local entity of this session is capable of exchanging PW ID FECs.

The value of vRtrLdpNgSessPeerSvcFec128Cap indicates whether the peer entity of this session is capable of exchanging PW ID FECs. When the 'fec128' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be the value sent by the peer LSR.

The value of vRtrLdpNgSessLocalSvcFec129Cap indicates whether the local entity of this session is capable of exchanging General PW ID FECs.

The value of vRtrLdpNgSessPeerSvcFec129Cap indicates whether the peer entity of this session is capable of exchanging General PW ID FECs over the session. When the 'fec129' bit is not set in vRtrLdpNgSessPeerCapRecv, this will be 'true'. Otherwise, it will be the value sent by the peer LSR.

The value of vRtrLdpNgSessOperMaxFecThreshold indicates the operational percentage of vRtrLdpNgSessParamMaxFec.

The value of vRtrLdpNgSessPeerCapRecv indicates various capabilities signaled by the peer LSR. A particular capability bit will be set to 1 when there is at least one capability message sent by peer LSR for a given capability type. Bits: 'ipv4PfxFec': 0, 'ipv6PfxFec': 1, 'fec129': 3, 'fec128': 2.

The value of vRtrLdpNgSessLocalUnregNotiCap indicates whether the local entity of this session has sent Unrecognized Notification capability to peer.

The value of vRtrLdpNgSessPeerUnregNotiCap indicates whether the peer has sent Unrecognized Notification capability.

The value of vRtrLdpNgSessEndOfLibSent indicates whether end of Label Inforamtion Base (LIB) notification has been send to the LDP peer. A particular sent bit will be set to 1 when there is at least one LIB notification sent to the LDP peer for a given service type. Bits: 'ipv4PfxFec': 0, 'ipv6PfxFec': 1, 'fec129': 5, 'fec128': 4, 'ipv6p2mpFec': 3, 'ipv4p2mpFec': 2.

The value of vRtrLdpNgSessEndOfLibRecv indicates whether end of Label Information Base (LIB) notification has been received from the LDP peer. A particular received bit will be set to 1 when there is at least one LIB notification received from the LDP peer for a given service type. Bits: 'ipv4PfxFec': 0, 'ipv6PfxFec': 1, 'fec129': 5, 'fec128': 4, 'ipv6p2mpFec': 3, 'ipv4p2mpFec': 2.

The value of vRtrLdpNgTargPeerTunlLspTblLstCh indicates the last timestamp when an entry in the vRtrLdpNgTargPeerTunnelLspTable was last changed.

The vRtrLdpNgTargPeerTunnelLspTable keeps the list of LDP-over-RSVP LSP ids which are currently supported by the application. Each LSP ID in the list corresponds to the vRtrMplsLspIndex of the given MPLS LSP.

A row in this table contains the LSP id information about an LDP interface or targeted peer. Row entry can be only created if there is corresponding targeted peer entry in vRtrLdpNgTargPeerTable. Row entries can be created or deleted via SNMP SET requests. A row is created by setting vRtrLdpNgTargPeerLspRowStatus to 'createAndGo' provided the corresponding LSP id exists as an MPLS lsp. A row entry can be destroyed by setting vRtrLdpNgTargPeerLspRowStatus to 'destroy'.

The value of vRtrLdpNgTargPeerLspId specifies the LSP id of the LSP associated with the specified interface or targeted peer.

vRtrLdpNgTargPeerLspRowStatus is used to create, delete or control entries in the vRtrLdpNgTargPeerTunnelLspTable. An entry is created by setting vRtrLdpNgTargPeerLspRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgTargPeerLspRowStatus to 'destroy'.

The value of vRtrLdpNgSessionParamsTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgSessionParamsTable was last changed.

The vRtrLdpNgSessionParamsTable is used to configure parameters applicable to an LDP session.

Each row entry represents an LDP session to a far end peer. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgSessParamRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgSessParamRowStatus to 'destroy'.

vRtrLdpNgSessParamRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgSessionParamsTable. A row can be created by setting vRtrLdpNgSessParamRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. A row entry can be destroyed by setting vRtrLdpNgSessParamRowStatus to 'destroy'.

The value of vRtrLdpNgSessParamDODLblDistrib specifies whether or not Downstream-On-Demand (DOD) has been enabled for the LDP session. When the value is set to 'true' DOD is enabled for the LDP session.

The value of vRtrLdpNgSessParamImportPolicy1 specifies the first import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.

The value of vRtrLdpNgSessParamImportPolicy2 specifies the second import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.

The value of vRtrLdpNgSessParamImportPolicy3 specifies the third import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.

The value of vRtrLdpNgSessParamImportPolicy4 specifies the fourth import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.

The value of vRtrLdpNgSessParamImportPolicy5 specifies the fifth import policy used to determine which FEC prefixes received from other LDP and TLDP peers should be re-distributed to this LDP peer.

The value of vRtrLdpNgSessParamExportPolicy1 specifies the first export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.

The value of vRtrLdpNgSessParamExportPolicy2 specifies the second export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.

The value of vRtrLdpNgSessParamExportPolicy3 specifies the third export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.

The value of vRtrLdpNgSessParamExportPolicy4 specifies the fourth export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.

The value of vRtrLdpNgSessParamExportPolicy5 specifies the fifth export policy used to determine which FEC prefixes received from this LDP peer should be re-distributed to other LDP and TLDP peers.

The value of vRtrLdpNgSessFec129CiscoInterop specifies whether LDP will provide translation between non-compliant FEC 129 formats of Cisco. Peer LDP sessions must be manually configured towards the non-compliant Cisco PEs. When the value of vRtrLdpNgSessFec129CiscoInterop is 'true', Cisco non-compliant format will be used to send and interpret received Label Release messages i.e. the FEC129 SAII and TAII fields will be reversed. When the value of vRtrLdpNgSessFec129CiscoInterop is 'false', Cisco non-compliant format will not be used or supported.

The value of vRtrLdpNgSessParamAdvAdjAddrOnly specifies whether to only distribute the local addresses used by hello adjacencies with this LDP peer. When the value is SET to 'true', local addresses that are used by hello adjacencies with this LDP peer are only distributed to the peer session . When the value is SET to 'false', all known local addresses are distributed to the peer session

The value of vRtrLdpNgSessPeIDMacFlushInterop specifies whether LDP will react to and send the non-standard PE-ID TLV (type 0x405) in an address withdraw message to effect 'flush-all-from-me' behavior. It is used to provide interoperability with other vendors that use this TLV for the MAC flush mechanism. Only FEC type 128 is currently supported. Peer LDP sessions must be manually configured towards the PEs requiring support for this TLV. When the value of vRtrLdpNgSessPeIDMacFlushInterop is set to 'true', the receipt of an address withdraw message with empty MAC list including the non-standard TLV will trigger 'flush-all-from-me' behavior instead of the normal 'flush-all-but-mine'. The TLV will be included in any forwarding towards like-configured peers. When the value of vRtrLdpNgSessPeIDMacFlushInterop is set to 'false', the non-standard TLV will be ignored and will not be included in any address withdraw messages sent to the peer.

The value of vRtrLdpNgSessParamIPv4PfxFecCap specifies whether IPv4 prefix FECs can be exchanged over this session

The value of vRtrLdpNgSessParamIPv6PfxFecCap specifies whether IPv6 prefix FECs can be exchanged over this session

The value of vRtrLdpNgSessParamP2MPFecCap specifies whether P2MP FECs can be exchanged over this session

The value of vRtrLdpNgSessParamMaxFec specifies the maximum number of FECs that will be accepted from this peer LSR. A value of zero specifies there is no limit to the number of FECs accepted from this peer LSR. The vRtrLdpNgSessMaxFecThresChanged notification is sent when the number of FECs receive from this peer LSR exceeds a percentage of this limit as specified by vRtrLdpPeerMaxFecThreshold. Furthermore, once the limit is exhausted, following actions are taken if vRtrLdpNgSessParamMaxFecLogOnly has value of 'false'. (1) If LSR Overload capability is supported, this LSR will follow the LSR Overload procedure. (2) If LSR Overload capability is not supported, any further Label Mapping Message is returned with Label Release Message with LDP status code 'No_Label_Resources'.

The value of vRtrLdpNgSessParamMaxFecLogOnly specifies whether to only generate vRtrLdpNgSessMaxFecThresChanged notification or take further action when FECs received exceeds vRtrLdpNgSessParamMaxFec limit. When this value is set to 'false', trap will be generated and one of the following action is taken: (1) If LSR Overload capability is supported, this LSR will follow the LSR Overload procedure. (2) If LSR Overload capability is not supported, any further Label Mapping Message is returned with Label Release Message with LDP status code 'No_Label_Resources'. When this value is set to 'true', trap will be generated only.

The value of vRtrLdpNgSessParamMaxFecThold specifies a percentage of vRtrLdpNgSessParamMaxFec.

The value of vRtrLdpNgSessParamAddrExpPolicy1 specifies the first export policy used to determine which local addresses should be distributed to this peer.

The value of vRtrLdpNgSessParamAddrExpPolicy2 specifies the second export policy used to determine which local addresses should be distributed to this peer.

The value of vRtrLdpNgSessParamAddrExpPolicy3 specifies the third export policy used to determine which local addresses should be distributed to this peer.

The value of vRtrLdpNgSessParamAddrExpPolicy4 specifies the fourth export policy used to determine which local addresses should be distributed to this peer.

The value of vRtrLdpNgSessParamAddrExpPolicy5 specifies the fifth export policy used to determine which local addresses should be distributed to this peer.

The vRtrLdpNgSessionInAddrTable is a read-only table that represents all local addresses either sent to or received from an LDP peer for a single session between an LDP entity and an LDP Peer.

Each row entry represents an instance of all local addresses sent to or received from an LDP peer.

The value of vRtrLdpNgSessAddrLclLdpIdType indicates the local LDP identifier type for the LDP session indicated by vRtrLdpNgSessionAddrLocalLdpId.

The value of vRtrLdpNgSessionAddrLocalLdpId indicates the local LDP identifier for this LDP session.

The value of vRtrLdpNgSessionAddrNumInAddrs indicates the number of local addresses that have been received from the peer for this session.

The value of vRtrLdpNgSessionAddrNumOutAddrs indicates the number of local addresses that have been sent to the peer for this session.

The vRtrLdpNgSessionInAddrTable is a read-only table that represents all local addresses received from an LDP peer for a single session between an LDP entity and an LDP Peer.

Each row entry represents an instance of a local address received from an LDP peer.

The value of vRtrLdpNgSessionInAddrAddrType indicates the address type of vRtrLdpNgSessionInAddrAddress.

The value of vRtrLdpNgSessionInAddrAddress indicates the IP address received from the peer for this LDP session.

The value of vRtrLdpNgSessInAddrLclLdpIdType indicates the local LDP identifier type for the LDP session indicated by vRtrLdpNgSessionInAddrLocalLdpId.

The value of vRtrLdpNgSessionInAddrLocalLdpId indicates the local LDP identifier for this LDP session.

The vRtrLdpNgSessionOutAddrTable is a read-only table that represents all local addresses sent to an LDP peer for a single session between an LDP entity and an LDP Peer.

Each row entry represents an instance of a local address sent to an LDP peer.

The value of vRtrLdpNgSessionOutAddrAddrType indicates the address type of vRtrLdpNgSessionOutAddrAddress.

The value of vRtrLdpNgSessionOutAddrAddress indicates the IP address sent to the peer for this LDP session.

The value of vRtrLdpNgSessOutAddrLclLdpIdType indicates the local LDP identifier type for the LDP session, indicated by vRtrLdpNgSessionOutAddrLclLdpId.

The value of vRtrLdpNgSessionOutAddrLclLdpId indicates the local LDP identifier for this LDP session.

The vRtrLdpNgAddrFecTable is a read-only table that represents all address FECs either sent to or received from an LDP peer known to the Virtual Router.

Each row entry represents an instance of an address FEC sent to or received from an LDP peer.

The value of vRtrLdpNgAddrFecFecType specifies the FEC type.

The value of vRtrLdpNgAddrFecIpPrefixType indicates the address-type of vRtrLdpNgAddrFecIpPrefix.

The value of vRtrLdpNgAddrFecIpPrefix specifies the IP Address Prefix for this address FEC.

The value of vRtrLdpNgAddrFecIpPrefixLen indicates the prefix length of the subnet associated with vRtrLdpNgAddrFecIpPrefix.

The bit flags of vRtrLdpNgAddrFecFlags indicate the characteristics of the FEC.

The value of vRtrLdpNgAddrFecNumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.

The value of vRtrLdpNgAddrFecNumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.

The vRtrLdpNgAddrFecInLblTable is a read-only table that represents all address FECs received from an LDP peer known to the Virtual Router.

Each row entry represents an instance of an address FEC received from an LDP peer.

The value of vRtrLdpNgAddrFecInLblId indicates the label number of the ingress label exchanged.

The value of vRtrLdpNgAddrFecInLbl indicates the ingress label exchanged.

The value of vRtrLdpNgAddrFecInLblStatus indicates the status of the ingress label.

The value of vRtrLdpNgAddrFecInLblIfIndex indicates the interface index for ingress label.

The vRtrLdpNgAddrFecOutLblTable is a read-only table that represents all address FECs sent to an LDP peer known to the Virtual Router.

Each row entry represents an instance of an address FEC received from an LDP peer.

The value of vRtrLdpNgAddrFecOutLblId indicates the label number of the egress label exchanged.

The value of vRtrLdpNgAddrFecOutLbl indicates the egress label exchanged

The value of vRtrLdpNgAddrFecOutLblStatus indicates the status of the egress label.

The value of vRtrLdpNgAddrFecOutLblIfIndex indicates the interface index for egress label.

The value of vRtrLdpNgAddrFecOutLblNHType indicates the address type of vRtrLdpNgAddrFecOutLblNHAddr.

The value of vRtrLdpNgAddrFecOutLblNHAddr indicates the IP address of the next hop for egress label.

The value of vRtrLdpNgAddrFecOutLblMetric indicates the relative cost of the tunnel represented by this address FEC egress label.

The value of vRtrLdpNgAddrFecOutLblMtu indicates the maximum transfer unit for payloads represented by this address FEC egress label.

The value of vRtrLdpNgAddrFecOutLblLspId indicates the LSP id associated with egress label.

The vRtrLdpNgAddrFecMapTable is a read-only table which maps to the vRtrLdpNgAddrFecTable. This table has the same indexes as the vRtrLdpNgAddrFecTable but the order in which these indexes are specified is different for the two tables.

Each row entry represents an instance of an address FEC sent to or received from an LDP peer.

The bit flags of vRtrLdpNgAddrFecMapFlags indicate the characteristics of the FEC.

The value of vRtrLdpNgAddrFecMapNumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.

The value of vRtrLdpNgAddrFecMapNumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.

The vRtrLdpNgExtP2MPFecTable is a read-only table that represents operational information of P2MP FECs either sent to or received from an LDP peer known to the Virtual Router.

Each row entry represents an instance of operational information of a P2MP FEC sent to or received from an LDP peer.

The value of vRtrLdpNgExtP2MPFecOpaqueType indicates the type of a Multi-Point Opaque Value Element.

The value of vRtrLdpNgExtP2MPFecOpaqueLength indicates the length of a Multi-Point Opaque Value Element.

The value of vRtrLdpNgExtP2MPFecOpaqueValue indicates the value of a Multi-Point Opaque Value Element.

The value of vRtrLdpNgExtP2MPFecRootAddrType indicates the type of ip address of the root for this P2MP FEC.

The value of vRtrLdpNgExtP2MPFecRootAddress indicates the ip address of the root for this P2MP FEC.

The bit flags of vRtrLdpNgExtP2MPFecFlags indicates the characteristics of the FEC.

The value of vRtrLdpNgExtP2MPFecNumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.

The value of vRtrLdpNgExtP2MPFecNumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.

The value of vRtrLdpNgExtP2MPFecTunnelIfId indicates the tunnel interface identifier for this P2MP FEC.

The value of vRtrLdpNgExtP2MPFecMetric indicates the relative cost of the tunnel represented by this P2MP FEC

The value of vRtrLdpNgExtP2MPFecMTU indicates the maximum transfer unit for payloads represented by this P2MP FEC

The vRtrLdpNgExtP2MPFecInLblTable is a read-only table that represents all P2MP FECs received from an LDP peer known to the virtual router.

Each row entry represents an instance of a P2MP FEC received from an LDP peer.

The value of vRtrLdpNgExtP2MPFecInLblId indicates the label number of the ingress label exchanged.

The value of vRtrLdpNgExtP2MPFecInLbl indicates the ingress label exchanged.

The value of vRtrLdpNgExtP2MPFecInLblStatus indicates the status of the ingress label.

The vRtrLdpNgExtP2MPFecTable is a read-only table that represents all P2MP FECs sent to an LDP peer known to the Virtual Router.

Each row entry represents an instance of a P2MP FEC sent to a LDP peer.

The value of vRtrLdpNgExtP2MPFecOutLblId indicates the label number of the egress label exchanged.

The value of vRtrLdpNgExtP2MPFecOutLbl indicates the egress label exchanged.

The value of vRtrLdpNgExtP2MPFecOutLblStatus indicates the status of the egress label.

The value of vRtrLdpNgExtP2MPFecOutLblNHType indicates the address type of vRtrLdpNgExtP2MPFecOutLblNHAdr.

The value of vRtrLdpNgExtP2MPFecOutLblNHAdr indicates the IP address of the next hop for egress label.

The value of vRtrLdpNgExtP2MPFecOutLblIfIndex indicates the interface index for egress label.

The value of vRtrLdpNgExtP2MPFecOutLblLspId indicates the LSP id associated with egress label.

The vRtrLdpNgExtP2MPFecMapTable is a read-only table which maps to the vRtrLdpNgExtP2MPFecTable. This table has the same indexes as the vRtrLdpNgExtP2MPFecTable but the order in which these indexes are specified is different for the two tables.

Each row entry represents an instance of a P2MP FEC sent to or received from an LDP peer.

The bit flags of vRtrLdpNgExtP2MPFecMapFlags indicates the characteristics of the FEC.

The value of vRtrLdpNgExtP2MPFecMapNumInLbls indicates the number of labels that have been sent to the peer associated with this FEC.

The value of vRtrLdpNgExtP2MPFecMapNumOutLbls indicates the number of labels that have been received from the peer associated with this FEC.

The value of vRtrLdpNgExtP2MPFecMapTunnelIfId indicates the tunnel interface identifier for this P2MP FEC.

The value of vRtrLdpNgExtP2MPFecMapMetric indicates the relative cost of the tunnel represented by this P2MP FEC

The value of vRtrLdpNgExtP2MPFecMapMTU indicates the maximum transfer unit for payloads represented by this P2MP FEC

The vRtrLdpNgInetIfStatsTable is a read-only table. The purpose of this table is to keep statistical information about the LDP Interfaces for given Inet address family on this LSR. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgInetIfTable, and the augmenting table, vRtrLdpNgInetIfStatsTable. This in effect extends the vRtrLdpNgInetIfTable with additional columns. Creation or deletion of a row in the vRtrLdpNgInetIfTable results in the same fate for the row in the vRtrLdpNgInetIfStatsTable.

A row in this table contains statistical information about an LDP Interface for given Inet address family. Some counters contained in a row are for fatal errors received during a former LDP Session associated with this entry. For example, an LDP Pdu received on a TCP connection during an LDP Session contains a fatal error. That error is counted here, because the session is terminated. If the error is NOT fatal (i.e. and the Session remains), then the error is counted in the vRtrLdpNgSessionStatsEntry.

The value of vRtrLdpNgInetIfStatsExistingAdj indicates a count of the total active adjacencies on this LDP interface for given Inet address family.

The value of vRtrLdpNgInetIfStatsHelloRecv indicates number of Hello messages received with this LDP interface.

The value of vRtrLdpNgInetIfStatsHelloSent indicates the number of Hello messages sent with this LDP interface.

The value of vRtrLdpNgInetIfStatsBadPduLen indicates the number of bad PDU length errors detected with this LDP interface.

The value of vRtrLdpNgInetIfStatsBadMsgLen indicates the number of bad message length errors detected with this LDP interface.

The value of vRtrLdpNgInetIfStatsMalformedTlv indicates the number of malformed TLV value errors detected with this LDP interface.

The value of vRtrLdpNgInetIfStatsBadProtoVer indicates the number of bad protocol version errors detected with this LDP interface.

The vRtrLdpNgSessionStatsTable is a read-only table. The purpose of this table is to keep statistical information about a single session between an LDP entity and an LDP Peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgSessionTable, and the augmenting table, vRtrLdpNgSessionStatsTable. This in effect extends the vRtrLdpNgSessionTable with additional columns. Creation or deletion of a row in the vRtrLdpNgSessionTable results in the same fate for the row in the vRtrLdpNgSessionStatsTable.

A row in this table represents statistical information about a single session between an LDP entity and an LDP Peer.

The value of vRtrLdpNgSessStatsTargAdj indicates the number of targeted adjacencies for this session.

The value of vRtrLdpNgSessStatsLinkAdj indicates the number of link adjacencies for this session.

The value of vRtrLdpNgSessStatsHelloIn counts the number of Hello Messages that have been received during this session.

The value of vRtrLdpNgSessStatsHelloOut counts the number of Hello Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsKeepaliveIn counts the number of Keepalive Messages that have been received during this session.

The value of vRtrLdpNgSessStatsKeepaliveOut counts the number of Keepalive Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsInitIn counts the number of Init Messages that have been received during this session.

The value of vRtrLdpNgSessStatsInitOut counts the number of Init Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsLblMappingIn counts the number of Label Mapping Messages that have been received during this session.

The value of vRtrLdpNgSessStatsLblMappingOut counts the number of Label Mapping Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsLblRequestIn counts the number of Label Request Messages that have been received during this session.

The value of vRtrLdpNgSessStatsLblRequestOut counts the number of Label Request Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsLblReleaseIn counts the number of Label Release Messages that have been received during this session.

The value of vRtrLdpNgSessStatsLblReleaseOut counts the number of Label Release Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsLblWithdrawIn counts the number of Label Withdraw Messages that have been received during this session.

The value of vRtrLdpNgSessStatsLblWithdrawOut counts the number of Label Withdraw Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsLblAbortIn counts the number of Label Abort Messages that have been received during this session.

The value of vRtrLdpNgSessStatsLblAbortOut counts the number of Label Abort Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsAddrIn counts the number of Address Messages that have been received during this session.

The value of vRtrLdpNgSessStatsAddrOut counts the number of Address Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsAddrWithdrIn counts the number of Address Withdraw Messages that have been received during this session.

The value of vRtrLdpNgSessStatsAddrWithdrOut counts the number of Address Withdraw Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsNotifIn counts the number of Notification Messages that have been received during this session.

The value of vRtrLdpNgSessStatsNotifOut counts the number of Notification Messages that have been sent during this session.

The value of vRtrLdpNgSessStatsIPv4PfxFecRcv counts the number of IPv4 prefix FECs received for this session.

The value of vRtrLdpNgSessStatsIPv6PfxFecRcv counts the number of IPv6 prefix FECs received for this session.

The value of vRtrLdpNgSessStatsIPv4PfxFecSnt counts the number of IPv4 prefix FECs sent for this session.

The value of vRtrLdpNgSessStatsIPv6PfxFecSnt counts the number of IPv6 prefix FECs sent for this session.

The value of vRtrLdpNgSessStatsIPv4P2MPFecRcv counts the number of IPv4 P2MP FECs received for this session.

The value of vRtrLdpNgSessStatsIPv6P2MPFecRcv counts the number of IPv6 P2MP FECs received for this session.

The value of vRtrLdpNgSessStatsIPv4P2MPFecSnt counts the number of IPv4 P2MP FECs sent for this session.

The value of vRtrLdpNgSessStatsIPv6P2MPFecSnt counts the number of IPv6 P2MP FECs sent for this session.

The value of vRtrLdpNgSessStatsSvcFec128Recv counts the number of service FEC 128 received for this session.

The value of vRtrLdpNgSessStatsSvcFec128Sent counts the number of service FEC 128 sent for this session.

The value of vRtrLdpNgSessStatsSvcFec129Recv counts the number of service FEC 129 received for this session.

The value of vRtrLdpNgSessStatsSvcFec129Sent counts the number of service FEC 129 sent for this session.

The value of vRtrLdpNgSessStatsIPv4AddrRecv counts the number of IPv4 local addresses received for this session.

The value of vRtrLdpNgSessStatsIPv6AddrRecv counts the number of IPv6 local addresses received for this session.

The value of vRtrLdpNgSessStatsIPv4AddrSent counts the number of IPv4 local addresses sent for this session.

The value of vRtrLdpNgSessStatsIPv6AddrSent counts the number of IPv6 local addresses sent for this session.

The value of vRtrLdpNgSessStatsCapabilityIn counts the number of Capability Messages that have been received during this session.

The value of vRtrLdpNgSessStatsCapabilityOut counts the number of Capability Messages that have been sent during this session.

The vLdpNgSvcFec128Table is a read-only table that represents operational information of Service FEC 128 either sent to or received from an LDP peer known to the Virtual Router.

Each row entry represents an instance of a service FEC 128 sent to or received from an LDP peer.

The value of vLdpNgFec128FecType specifies the FEC type associated with this service FEC.

The value of vLdpNgFec128VcType specifies the VC type associated with this service FEC.

The value of vLdpNgFec128VcId specifies the VC identifier associated with this service FEC.

The value of vLdpNgFec128ServType indicates the Service type associated with this service FEC.

The value of vLdpNgFec128ServId indicates the Service identifier associated with this service FEC.

The value of vLdpNgFec128VpnId identifies the VPN associated with the FEC.

The bit flags of vLdpNgFec128Flags indicate the characteristics of the FEC.

The value of vLdpNgFec128NumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.

The value of vLdpNgFec128NumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.

The value of vLdpNgFec128SdpId identifies the SDP associated with this peer.

The value of vLdpNgFec128MateEndptVcId indicates the VC identifier associated with this service FEC mate endpoint for vc-switching. vLdpNgFec128MateEndptVcId is set to zero (0) for non-switching FECs.

The value of vLdpNgFec128MateEndptSdpId identifies the SDP associated with this service FEC mate endpoint for vc-switching.

The vLdpNgSvcFec128InLblTable is a read-only table that represents all service FEC 128 received from an LDP peer known to the Virtual Router.

Each row entry represents an instance of a service FEC received from an LDP peer.

The value of vLdpNgFec128InLabelId identifies the ingress label exchanged.

The value of vLdpNgFec128InLabel indicates the ingress label exchanged.

The value of vLdpNgFec128InLabelStatus indicates the status of the ingress label.

The value of vLdpNgFec128InLabelSigStatus indicates the signaling status for vLdpNgFec128InLabel.

The value of vLdpNgFec128InLblWdwReason indicates the reason of withdrawal of ingress label value in vLdpNgFec128InLabel.

The value of vLdpNgFec128InLblMaxCellConcat indicates the local maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.

The value of vLdpNgFec128InLblFLTxCap indicates whether or not this LDP peer is capable of sending Flow Label in its pseudowire (PW) packet. The value of vLdpNgFec128InLblFLTxCap is 'true' when this LDP peer is capable of sending Flow Label and the value is 'false' when the peer is not capable of sending Flow Label in pseudowire packet.

The value of vLdpNgFec128InLblFLRxCap indicates whether or not this LDP peer is capable of receiving Flow Label in its pseudowire packet. The value of vLdpNgFec128InLblFLRxCap is 'true' when this LDP peer is capable of receiving Flow Label and the value is 'false' when the peer is not capable of receiving Flow Label in pseudowire packet.

The value of vLdpNgFec128InLblIPv4CeIpAdType indicates the local ipv4 CE Address type.

The value of vLdpNgFec128InLblIPv4CeIpAddr indicates the local ipv4 CE Address.

The value of vLdpNgFec128InLblIPv4Cap indicates whether or not the local ipv4 stack capability is supported for this LDP peer. The value of vLdpNgFec128InLblIPv4Cap is 'true' when the local ipv4 stack capability is supported and the value is 'false' when the local ipv4 stack capability is not supported.

The value of vLdpNgFec128InLblIPv6Cap indicates whether or not the local ipv6 stack capability is supported for this LDP peer. The value of vLdpNgFec128InLblIPv6Cap is 'true' when the local ipv6 stack capability is supported and the value is 'false' when the local ipv6 stack capability is not supported.

The value of vLdpNgFec128InLblMTU indicates the largest service frame size (in octets) that can be handled by the local ESR.

The value of vLdpNgFec128InLblVlanTag indicates the local tag on a VLAN VC type SDP binding.

The value of vLdpNgFec128InLblVccvCV indicates the CV (Connectivity Verification) types supported by peer LSR if it supports VCCV (Circuit Connectivity Verification) on pseudowire. If VCCV is not supported, vLdpNgFec128InLblVccvCV will be set to 0. Bits: 'bfdFaultDetect': 2, 'icmpPing': 0, 'bfdFaultDetectSignalling': 3, 'lspPing': 1.

The value of vLdpNgFec128InLblVccvCC indicates the CC (Control Channel) types supported by peer LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec128InLblVccvCC will be set to 0. Bits: 'routerAlertLabel': 1, 'pwe3ControlWord': 0, 'mplsDemuxLabelTL1': 2.

The value of vLdpNgFec128InLblPwStatus indicates whether the local LSR supports pseudowire status signaling.

The vLdpNgSvcFec128OutLblTable is a read-only table that represents all service FEC 128 sent to an LDP peer known to the Virtual Router.

Each row entry represents an instance of a service FEC 128 sent to an LDP peer.

The value of vLdpNgFec128OutLabelId specifies the identifier.

The value of vLdpNgFec128OutLabel indicates the egress label exchanged.

The value of vLdpNgFec128OutLabelStatus indicates the status of the egress label.

The value of vLdpNgFec128OutLabelSigStatus indicates the signaling status for vLdpNgFec128OutLabel.

The value of vLdpNgFec128OutLblMaxCellConcat indicates the remote maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.

The value of vLdpNgFec128OutLblFLTxCap indicates whether or not the remote LDP peer is capable of sending Flow Label in its pseudowire packet. The value of vLdpNgFec128OutLblFLTxCap is 'true' when the remote LDP peer is capable of sending Flow Label and the value is 'false' when the peer is not capable of sending Flow Label in pseudowire packet.

The value of vLdpNgFec128OutLblFLRxCap indicates whether or not the remote LDP peer is capable of receiving Flow Label in its pseudowire packet. The value of vLdpNgFec128OutLblFLRxCap is 'true' when the remote LDP peer is capable of receiving Flow Label and the value is 'false' when the peer is not capable of receiving Flow Label in pseudowire packet.

The value of vLdpNgFec128OutLblIPv4CeAddrType indicates the remote ipv4 CE Address type.

The value of vLdpNgFec128OutLblIPv4CeIpAddr indicates the remote ipv4 CE Address.

The value of vLdpNgFec128OutLblIPv4Cap indicates whether or not the remote ipv4 stack capability is supported for this LDP peer. The value of vLdpNgFec128OutLblIPv4Cap is 'true' when the remote ipv4 stack capability is supported and the value is 'false' when the remote ipv4 stack capability is not supported.

The value of vLdpNgFec128OutLblIPv6Cap indicates whether or not the remote ipv6 stack capability is supported for this LDP peer. The value of vLdpNgFec128OutLblIPv6Cap is 'true' when the remote ipv6 stack capability is supported and the value is 'false' when the remote ipv6 stack capability is not supported.

The value of vLdpNgFec128OutLblMTU indicates the largest service frame size (in octets) that can be handled by the remote ESR.

The value of vLdpNgFec128OutLblVlanTag indicates the remote tag on a VLAN VC type SDP binding.

The value of vLdpNgFec128OutLblVccvCV indicates the CV (Connectivity Verification) types supported by local LSR if it supports VCCV pseudowire. If VCCV is not supported, vLdpNgFec128OutLblVccvCV will be set to 0. Bits: 'bfdFaultDetect': 2, 'icmpPing': 0, 'bfdFaultDetectSignalling': 3, 'lspPing': 1.

The value of vLdpNgFec128OutLblVccvCC indicates the CC (Control Channel) types supported by local LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec128OutLblVccvCC will be set to 0. Bits: 'routerAlertLabel': 1, 'pwe3ControlWord': 0, 'mplsDemuxLabelTL1': 2.

The value of vLdpNgFec128OutLblPwStatus indicates whether the remote LSR supports pseudowire status signaling.

The vRtrLdpNgHelloAdjMapTable is a read-only table which maps to the vRtrLdpNgHelloAdjTable. This table has the same indexes as the vRtrLdpNgHelloAdjTable but the order in which these indexes are specified is different for the two tables.

Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies.

vRtrLdpNgHelloAdjMapLdpIdType is an index for the row entry. It indicates the LDP identifier type of the peer, indicated by vRtrLdpNgHelloAdjMapLdpId.

vRtrLdpNgHelloAdjMapLdpId is an index for the row entry. It indicates the LDP identifier of the peer.

The value of vRtrLdpNgHelloAdjMapIndex indicates the Hello adjacency index which is an index for MPLS-LDP-MIB::mplsLdpHelloAdjacencyEntry.

The vLdpNgSvcFec129Table is a read-only table that represents all service FEC-129s either sent to or received from an LDP peer known to the Virtual Router.

Each row entry represents an instance of a service FEC-129 sent to or received from an LDP peer.

The value of vLdpNgFec129AgiType specifies the type of the Attachment Group Identifier TLV associated with this service FEC.

The value of vLdpNgFec129AgiLen specifies the length of the Attachment Group Identifier TLV associated with this service FEC.

The value of vLdpNgFec129AgiVal specifies the value of the Attachment Group Identifier TLV associated with this service FEC.

The value of vLdpNgFec129SrcAiiType specifies the type of the Source Attachment Individual Identifier TLV associated with this service FEC.

The value of vLdpNgFec129SrcAiiLen specifies the length of the Source Attachment Individual Identifier TLV associated with this service FEC.

The value of vLdpNgFec129SrcAiiVal specifies the value of the Source Attachment Individual Identifier TLV associated with this service FEC.

The value of vLdpNgFec129TgtAiiType specifies the type of the Target Attachment Individual Identifier TLV associated with this service FEC.

The value of vLdpNgFec129TgtAiiLen specifies the length of the Target Attachment Individual Identifier TLV associated with this service FEC.

The value of vLdpNgFec129TgtAiiVal specifies the value of the Target Attachment Individual Identifier TLV associated with this service FEC.

The value of vLdpNgFec129ServType indicates the Service type associated with this service FEC.

The value of vLdpNgFec129ServId indicates the Service identifier associated with this service FEC.

The value of vLdpNgFec129VpnId identifies the VPN associated with the FEC.

The value of vLdpNgFec129Flags indicates the characteristics of the FEC.

The value of vLdpNgFec129NumInLabels indicates the number of labels that have been sent to the peer associated with this FEC.

The value of vLdpNgFec129NumOutLabels indicates the number of labels that have been received from the peer associated with this FEC.

The value of vLdpNgFec129SdpId indicates the SDP associated with this peer.

The value of vLdpNgFec129MateAgiType indicates the type of the Attachment Group Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateAgiLen indicates the length of the Attachment Group Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateAgiVal indicates the value of the Attachment Group Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateSrcAiiType indicates the type of the Source Attachment Individual Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateSrcAiiLen indicates the length of the Source Attachment Individual Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateSrcAiiVal indicates the value of the Source Attachment Individual Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateTgtAiiType indicates the type of the Target Attachment Individual Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateTgtAiiLen indicates the length of the Target Attachment Individual Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateTgtAiiVal indicates the value of the Target Attachment Individual Identifier TLV switched with this service FEC.

The value of vLdpNgFec129MateSdpId indicates the SDP switched with this peer.

The vLdpNgSvcFec129InLblTable is a read-only table that represents all service FEC-129s received from an LDP peer known to the Virtual Router.

Each row entry represents an instance of a service FEC-129 received from an LDP peer.

The value of vLdpNgFec129InLblId indicates the label number of the ingress label exchanged.

The value of vLdpNgFec129InLabel indicates the ingress label exchanged.

The value of vLdpNgFec129InLabelStatus indicates the status of the ingress label.

The value of vLdpNgFec129InLblMTU indicates the largest service frame size (in octets) that can be handled by the local ESR.

The value of vLdpNgFec129InLblVlanTag indicates the local tag on a VLAN VC type SDP binding.

The value of vLdpNgFec129InLblMaxCellConcat indicates the local maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.

The value of vLdpNgFec129InLblSigStatus indicates the signaling status for vLdpNgFec129InLabel.

The value of vLdpNgFec129InLblIPv4Cap indicates whether or not the local ipv4 stack capability is supported for this LDP peer. The value of vLdpNgFec129InLblIPv4Cap is 'true' when the local ipv4 stack capability is supported and the value is 'false' when the local ipv4 stack capability is not supported.

The value of vLdpNgFec129InLblIPv6Cap indicates whether or not the local ipv6 stack capability is supported for this LDP peer. The value of vLdpNgFec129InLblIPv6Cap is 'true' when the local ipv6 stack capability is supported and the value is 'false' when the local ipv6 stack capability is not supported.

The value of vLdpNgFec129InLblIPv4CeAddrType indicates the local CE Address type of the object indicated by vLdpNgFec129InLblIPv4CeIpAddr.

The value of vLdpNgFec129InLblIPv4CeIpAddr indicates the local CE Address.

The value of vLdpNgFec129InLblWdwReason indicates the reason of withdrawal of ingress label value in vLdpNgFec129InLabel.

The value of vLdpNgFec129InLblFLTxCap indicates whether or not this LDP peer is capable of sending Flow Label in its pseudowire (PW) packet. The value of vLdpNgFec129InLblFLTxCap is 'true' when this LDP peer is capable of sending Flow Label and the value is 'false' when the peer is not capable of sending Flow Label in pseudowire packet.

The value of vLdpNgFec129InLblFLRxCap indicates whether or not this LDP peer is capable of receiving Flow Label in its pseudowire packet. The value of vLdpNgFec129InLblFLRxCap is 'true' when this LDP peer is capable of receiving Flow Label and the value is 'false' when the peer is not capable of receiving Flow Label in pseudowire packet.

The value of vLdpNgFec129InLblVccvCV indicates the CV (Connectivity Verification) types supported by local LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec129InLblVccvCV will be set to 0. Bits: 'bfdFaultDetect': 2, 'icmpPing': 0, 'bfdFaultDetectSignalling': 3, 'lspPing': 1.

The value of vLdpNgFec129InLblVccvCC indicates the CC (Control Channel) types supported by local LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec129InLblVccvCC will be set to 0. Bits: 'routerAlertLabel': 1, 'pwe3ControlWord': 0, 'mplsDemuxLabelTL1': 2.

The value of vLdpNgFec129InLblPwStatus indicates whether the local LSR supports pseudowire status signaling.

The vLdpNgSvcFec129OutLblTable is a read-only table that represents all service FEC-129s sent to an LDP peer known to the Virtual Router.

Each row entry represents an instance of a service FEC-129 sent to an LDP peer.

The value of vLdpNgFec129OutLblId indicates the label number of the egress label exchanged.

The value of vLdpNgFec129OutLabel indicates the egress label exchanged.

The value of vLdpNgFec129OutLabelStatus indicates the status of the egress label

The value of vLdpNgFec129OutLblMTU indicates the largest service frame size (in octets) that can be handled by the remote ESR.

The value of vLdpNgFec129OutLblVlanTag indicates the remote tag on a VLAN VC type SDP binding.

The value of vLdpNgFec129OutLblMaxCellConcat indicates the remote maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.

The value of vLdpNgFec129OutLblSigStatus indicates the signaling status for vLdpNgFec129OutLabel.

The value of vLdpNgFec129OutLblIPv4Cap indicates whether or not the remote ipv4 stack capability is supported for this LDP peer. The value of vLdpNgFec129OutLblIPv4Cap is 'true' when the remote ipv4 stack capability is supported and the value is 'false' when the remote ipv4 stack capability is not supported.

The value of vLdpNgFec129OutLblIPv6Cap indicates whether or not the remote ipv6 stack capability is supported for this LDP peer. The value of vLdpNgFec129OutLblIPv6Cap is 'true' when the remote ipv6 stack capability is supported and the value is 'false' when the remote ipv6 stack capability is not supported.

The value of vLdpNgFec129OutLblIPv4CeAddrType indicates the remote CE Address type of the object indicated by vLdpNgFec129OutLblIPv4CeIpAddr.

The value of vLdpNgFec129OutLblIPv4CeIpAddr indicates the remote CE Address.

The value of vLdpNgFec129OutLblFLTxCap indicates whether or not the remote LDP peer is capable of sending Flow Label in its pseudowire packet. The value of vLdpNgFec129OutLblFLTxCap is 'true' when the remote LDP peer is capable of sending Flow Label and the value is 'false' when the peer is not capable of sending Flow Label in pseudowire packet.

The value of vLdpNgFec129OutLblFLRxCap indicates whether or not the remote LDP peer is capable of receiving Flow Label in its pseudowire packet. The value of vLdpNgFec129OutLblFLRxCap is 'true' when the remote LDP peer is capable of receiving Flow Label and the value is 'false' when the peer is not capable of receiving Flow Label in pseudowire packet.

The value of vLdpNgFec129OutLblVccvCV indicates the CV (Connectivity Verification) types supported by remote LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec129OutLblVccvCV will be set to 0. Bits: 'bfdFaultDetect': 2, 'icmpPing': 0, 'bfdFaultDetectSignalling': 3, 'lspPing': 1.

The value of vLdpNgFec129OutLblVccvCC indicates the CC (Control Channel) types supported by remote LSR if it supports VCCV on pseudowire. If VCCV is not supported, vLdpNgFec129OutLblVccvCC will be set to 0. Bits: 'routerAlertLabel': 1, 'pwe3ControlWord': 0, 'mplsDemuxLabelTL1': 2.

The value of vLdpNgFec129OutLblPwStatus indicates whether the remote LSR supports pseudowire status signaling.

The vLdpNgCepTdmFec128InLblTable is a read-only table that represents all CEP/TDM FECs received from an LDP peer known to the Virtual Router. The CEP/TDM Sub-TLVs are defined in RFC 4446: Parameter Id Description 0x04 CEP/TDM Payload Bytes 0x07 CEP/TDM bit-rate 0x0B TDM Options.

Each row entry represents an instance of a service FEC 128 sent to or received from an LDP peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vLdpNgSvcFec128InLblTable, and the augmenting table, vLdpNgCepTdmFec128InLblTable. This in effect extends the vLdpNgSvcFec128InLblTable with additional columns. Creation or deletion of a row in the vLdpNgSvcFec128InLblTable results in the same fate for the row in the vLdpNgCepTdmFec128InLblEntry.

The value of vLdpNgCepTdmFec128InLblPayldSize indicates the local payload size.

The value of vLdpNgCepTdmFec128InLblBitrate indicates the local bitrate.

The value of vLdpNgCepTdmFec128InLblRtpHeader indicates the local RTP header usage bit.

The value of vLdpNgCepTdmFec128InLblDiffTStmp indicates the local differential (or dynamic) timestamping mode bit.

The value of vLdpNgCepTdmFec128InLblSigPkts indicates the local CE application signalling packets mode.

The value of vLdpNgCepTdmFec128InLblCasTrunk indicates the local CE application signalling packets mode.

The value of vLdpNgCepTdmFec128InLblTStmpFreq indicates the local CE application signalling packets mode.

The value of vLdpNgCepTdmFec128InLblPayldType indicates the local payload type.

The value of vLdpNgCepTdmFec128InLblSsrcId indicates the local value of SSRC ID.

The vLdpNgCepTdmFec128OutLblTable is a read-only table that represents all CEP/TDM FECs sent to an LDP peer known to the Virtual Router. The CEP/TDM Sub-TLVs are defined in RFC 4446: Parameter Id Description 0x04 CEP/TDM Payload Bytes 0x07 CEP/TDM bit-rate 0x0B TDM Options.

Each row entry represents an instance of a service FEC sent to or received from an LDP peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vLdpNgSvcFec128OutLblTable, and the augmenting table, vLdpNgCepTdmFec128OutLblTable. This in effect extends the vLdpNgSvcFec128OutLblTable with additional columns. Creation or deletion of a row in the vLdpNgSvcFec128OutLblTable results in the same fate for the row in the vLdpNgCepTdmFec128OutLblEntry.

The value of vLdpNgCepTdmFec128OutLblPyldSze indicates the remote payload size.

The value of vLdpNgCepTdmFec128OutLblBitrate indicates the remote bitrate.

The value of vLdpNgCepTdmFec128OutLblRtpHdr indicates the remote RTP header usage bit.

The value of vLdpNgCepTdmFec128OutLblDfTstmp indicates the remote differential (or dynamic) timestamping mode bit.

The value of vLdpNgCepTdmFec128OutLblSigPkts indicates the remote CE application signalling packets mode.

The value of vLdpNgCepTdmFec128OutLblCasTrnk indicates the remote CE application signalling packets mode.

The value of vLdpNgCepTdmFec128OutLblTstmpFq indicates the remote CE application signalling packets mode.

The value of vLdpNgCepTdmFec128OutLblPyldTyp indicates the remote payload type.

The value of vLdpNgCepTdmFec128OutLblSsrcId indicates the remote value of SSRC ID.

The vLdpNgCepTdmFec129InLblTable is a read-only table that represents all CEP/TDM FECs received from an LDP peer known to the Virtual Router. The CEP/TDM Sub-TLVs are defined in RFC 4446: Parameter Id Description 0x04 CEP/TDM Payload Bytes 0x07 CEP/TDM bit-rate 0x0B TDM Options.

Each row entry represents an instance of a service FEC received from an LDP peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vLdpNgSvcFec129InLblTable, and the augmenting table, vLdpNgCepTdmFec129InLblTable. This in effect extends the vLdpNgSvcFec129InLblTable with additional columns. Creation or deletion of a row in the vLdpNgSvcFec129InLblTable results in the same fate for the row in the VLdpNgCepTdmFec129InLblEntry.

The value of vLdpNgCepTdmFec129InLblPayldSize indicates the local payload size.

The value of vLdpNgCepTdmFec129InLblBitrate indicates the local bitrate.

The value of vLdpNgCepTdmFec129InLblRtpHeader indicates the local RTP header usage bit.

The value of vLdpNgCepTdmFec129InLblDiffTStmp indicates the local differential (or dynamic) timestamping mode bit.

The value of vLdpNgCepTdmFec129InLblSigPkts indicates the local CE application signalling packets mode.

The value of vLdpNgCepTdmFec129InLblCasTrunk indicates the local CE application signalling packets mode.

The value of vLdpNgCepTdmFec129InLblTStmpFreq indicates the local CE application signalling packets mode.

The value of vLdpNgCepTdmFec129InLblPayldType indicates the local payload type.

The value of vLdpNgCepTdmFec129InLblSsrcId indicates the local value of SSRC ID.

THe vLdpNgCepTdmFec129OutLblTable is a read-only table that represents all CEP/TDM FECs sent to an LDP peer known to the Virtual Router. The CEP/TDM Sub-TLVs are defined in RFC 4446: Parameter Id Description 0x04 CEP/TDM Payload Bytes 0x07 CEP/TDM bit-rate 0x0B TDM Options.

Each row entry represents an instance of a service FEC sent to an LDP peer. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vLdpNgSvcFec129OutLblTable, and the augmenting table, vLdpNgCepTdmFec129OutLblTable. This in effect extends the vLdpNgSvcFec129OutLblTable with additional columns. Creation or deletion of a row in the vLdpNgSvcFec129OutLblTable results in the same fate for the row in the VLdpNgCepTdmFec129OutLblEntry.

The value of vLdpNgCepTdmFec129OutLblPyldSize indicates the remote payload size.

The value of vLdpNgCepTdmFec129OutLblBitrate indicates the remote bitrate.

The value of vLdpNgCepTdmFec129OutLblRtpHdr indicates the remote RTP header usage bit.

The value of vLdpNgCepTdmFec129OutLblDifTStmp indicates the remote differential (or dynamic) timestamping mode bit.

The value of vLdpNgCepTdmFec129OutLblSigPkts indicates the remote CE application signalling packets mode.

The value of vLdpNgCepTdmFec129OutLblCasTrnk indicates the remote CE application signalling packets mode.

The value of vLdpNgCepTdmFec129OutLblTStmpFrq indicates the remote CE application signalling packets mode.

The value of vLdpNgCepTdmFec129OutLblPyldType indicates the remote payload type.

The value of vLdpNgCepTdmFec129OutLblSsrcId indicates the remote value of SSRC ID.

The value of vRtrLdpNgStaticFecTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgStaticFecTable was last changed.

The vRtrLdpNgStaticFecTable has an entry for each static prefix FEC configured on the virtual router.

Each row entry represents a static prefix FEC configured on the virtual router. Entries can be created and deleted via SNMP SET operations to vRtrLdpNgStaticFecRowStatus. An entry is created by setting vRtrLdpNgStaticFecRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgStaticFecRowStatus to 'destroy'.

The value of vRtrLdpNgStaticFecIpPrefixType specifies the IP Address Prefix type for the static FEC indicated by vRtrLdpNgStaticFecIpPrefix.

The value of vRtrLdpNgStaticFecIpPrefix specifies the IP Address Prefix for this static FEC.

The value of vRtrLdpNgStaticFecIpPrefixLen specifies the IP Address Mask length for this static FEC.

vRtrLdpNgStaticFecRowStatus is used to create, delete or control entries in the vRtrLdpNgStaticFecTable. An entry is created by setting vRtrLdpNgStaticFecRowStatus 'createAndGo'. An entry is deleted by setting vRtrLdpNgStaticFecRowStatus to 'destroy'.

The value of vRtrLdpNgStaticFecNumInLabel indicates the number of in labels that are associated with the static prefix FEC represented by this row entry. This is also the number of row entries configured in the vRtrLdpNgStaticFecInLabelTable for this static prefix FEC. If the static FEC has no in labels associated with it, this value will be 0.

The value of vRtrLdpNgStaticFecNumOutLabel indicates the number of out labels that are associated with the static prefix FEC represented by this row entry. This is also the number of row entries configured in the vRtrLdpNgStaticFecOutLabelTable for this static prefix FEC. If the static FEC has no out labels associated with it, this value will be 0.

vRtrLdpNgStaticFecInLabelTable has an entry for each static prefix FEC in label configured on the virtual router.

Each row entry represents a static prefix FEC in label configured on the virtual router. The static prefix FEC corresponding to a in label entry must exist as a row entry in the vRtrLdpNgStaticFecTable. Entries can be created and deleted via SNMP SET operations to vRtrLdpNgSFecInLabelRowStatus. An entry is created by setting vRtrLdpNgSFecInLabelRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgSFecInLabelRowStatus to 'destroy'.

The value of vRtrLdpNgSFecInLabel indicates the label that is advertised to the upstream peer. The range of vRtrLdpNgSFecInLabel is dynamic and depends on the value of vRtrMplsLabelStaticLabelRange. The normal range of vRtrLdpNgSFecInLabel starts at 32 and ends at the value of vRtrMplsLabelStaticLabelRange + 32. If this variable is set to the value of 4294967295, the ingress label will be dynamically assigned by the label manager.

vRtrLdpNgSFecInLabelRowStatus is used to create, delete or control entries in the vRtrLdpNgStaticFecInLabelTable. An entry is created by setting vRtrLdpNgSFecInLabelRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgSFecInLabelRowStatus to 'destroy'.

The value of vRtrLdpNgSFecOperInLabel indicates the actual or operational value of the label that was advertised to the upstream peer.

vRtrLdpNgStaticFecOutLabelTable has an entry for each static prefix FEC out label configured on the virtual router.

Each row entry represents a static prefix FEC out label configured on the virtual router. The static prefix FEC corresponding to a in label entry must exist as a row entry in the vRtrLdpNgStaticFecTable. For vRtrLdpNgSFecOutLabelType 'pop' or 'swap' corresponding static FEC Prefix row entry must exist in vRtrLdpNgStaticFecInLabelTable Entries can be created and deleted via SNMP SET operations to vRtrLdpNgSFecOutLabelRowStatus. An entry is created by setting vRtrLdpNgSFecOutLabelRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgSFecOutLabelRowStatus to 'destroy'.

The value of vRtrLdpNgSFecOutLabelType indicates operation type of this FEC. Enumeration: 'push': 2, 'unknown': 0, 'swap': 3, 'pop': 1.

If vRtrLdpNgSFecOutLabelType is set to 'swap' or 'push', the value of vRtrLdpNgSFecOutLabelIfName indicates the interface name to use for this static fec prefix. If vRtrLdpNgSFecOutLabelType is set to 'pop', the value of vRtrLdpNgSFecOutLabelIfName will be a null string.

The value of vRtrLdpNgSFecOutLabelIpAddrType indicates the IP address type for vRtrLdpNgSFecOutLabelIpAddr.

If vRtrLdpNgSFecOutLabelType is set to 'swap' or 'push', the value of vRtrLdpNgSFecOutLabelIpAddr indicates the IP address of the next-hop. If vRtrLdpNgSFecOutLabelType is set to 'pop', the value of vRtrLdpNgSFecOutLabelIpAddr will be 0.0.0.0

vRtrLdpNgSFecOutLabelRowStatus is used to create, delete or control entries in the vRtrLdpNgStaticFecOutLabelTable. An entry is created by setting vRtrLdpNgSFecOutLabelRowStatus to 'createAndGo'. An entry is deleted by setting vRtrLdpNgSFecOutLabelRowStatus to 'destroy'.

The value of vRtrLdpNgSFecOutLabel specifies the egress label associated with this next-hop entry. The LSR will swap the incoming label with the configured egress label. If the value of vRtrLdpNgSFecOutLabel is set to 4294967295, the LSR will pop the incoming label.

The value of vRtrLdpNgTargPeerTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgTargPeerTable was last changed.

vRtrLdpNgTargPeerTable provides an entry for each virtual router targeted peer configured to be used with the Label Distribution Protocol (LDP).

Each row entry represents a targeted peer on this virtual router that participates in the LDP protocol. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgTargPeerRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgTargPeerRowStatus to 'destroy'.

The value of vRtrLdpNgPeerAddressType specifies the address family type for vRtrLdpNgPeerAddress.

vRtrLdpNgPeerAddress specifies the targeted peer IP address.

vRtrLdpNgTargPeerRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgTargPeerTable. A row can be created by setting vRtrLdpNgTargPeerRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. A row entry can be destroyed by setting vRtrLdpNgTargPeerRowStatus to 'destroy'.

The value of vRtrLdpNgTargPeerLastChange indicates the sysUpTime when this row was last modified.

The value of vRtrLdpNgTargPeerAdminState specifies the desired administrative state for this LDP targeted peer.

The value of vRtrLdpNgTargPeerOperState indicates the current operational state of LDP targeted peer.

The value of vRtrLdpNgTargPeerUpTime indicates the time, in hundreds of seconds, that the targeted peer has been in current operational state vRtrLdpNgTargPeerOperState. If the value of vRtrLdpNgTargPeerOperState is 'inService (2)', then vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has been operationally up. If the value of vRtrLdpNgTargPeerOperState is 'outOfService (3)', then vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has been operationally down. If the value of vRtrLdpNgTargPeerOperState is 'transition (4)', then vRtrLdpNgTargPeerUpTime specifies the time that the targeted peer has been operationally in transition.

The value of vRtrLdpNgTargPeerOperDownReason indicates the operational down reason for targeted peer.

Some writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrLdpNgGeneralTable. vRtrLdpNgTargPeerInheritance controls whether to inherit the operational value of that object, or to use the administratively set value. Non mask bits will always have value of zero, and any attempt to change the value will be silently discarded. When the bit for an object has value of one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value. The mask bit(s) will be set to one when SET is performed on the inherited object(s). Any attempt to set the mask bit to one will be silently discarded. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrLdpNgGeneralTable. This object is a bit-mask, with the following positions: vRtrLdpNgTargPeerKAFactor 0x1 vRtrLdpNgTargPeerKATimeout 0x2 vRtrLdpNgTargPeerHelloFactor 0x4 vRtrLdpNgTargPeerHelloTimeout 0x8 vRtrLdpNgTargPeerHelloReduction 0x10 vRtrLdpNgTargPeerHelloRdctnFctr 0x20

The value of vRtrLdpNgTargPeerKAFactor specifies the value by which the keepalive timeout (vRtrLdpNgTargPeerKATimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors.

The value of vRtrLdpNgTargPeerKATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgTargPeerKATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages).

The value of vRtrLdpNgTargPeerHelloFactor specifies the value by which the hello timeout (vRtrLdpNgTargPeerHelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors.

The value of vRtrLdpNgTargPeerHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time.

The value of vRtrLdpNgTargPeerOprHelloTimeout indicates the operational hello time also known as hold time used by the operational targeted peer. It is the time interval that LDP waits before declaring a neighbor to be down.

The value of vRtrLdpNgTargPeerHelloReduction specifies whether hello reduction to this targeted peer is enabled or not. If enabled, the sender advertises the dampened vRtrLdpNgTargPeerHelloTimeout, to the targeted peer after LDP session is established.

The value of vRtrLdpNgTargPeerHelloRdctnFctr specifies the number of hello messages that are sent at consistent vRtrLdpNgTargPeerHelloTimeout value before advertising further dampened vRtrLdpNgTargPeerHelloTimeout. An 'inconsistentValue' error is returned if this object is set when vRtrLdpNgTargPeerHelloReduction is disabled.

The value of vRtrLdpNgTargPeerBackoffTime specifies the initial value for the backoff interval. The backoff interval is the time, in seconds, that LDP waits after an LDP session setup has failed before it attempts to setup the session again. After the LDP session startup fails the first time, the backoff interval is set to the value of vRtrLdpNgTargPeerBackoffTime. Thereafter, if session startup fails again the backoff interval increases exponentially.

The value of vRtrLdpNgTargPeerMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router waits before retrying) increases exponentially. If the backoff interval exceeds vRtrLdpNgTargPeerMaxBackoffTime, the router will give up trying to establish the LDP session. If vRtrLdpNgTargPeerMaxBackoffTime has value of zero (0), then the backoff interval does not increase exponentially after the first session startup attempt fails. Instead it remains constant and LDP will keep retrying to establish a session until it succeeds.

The value of vRtrLdpNgTargPeerTunneling specifies whether tunneling of LDP over tunnels is enabled. When this object has a value of 'true', tunneling is enabled. When its value is 'false', tunneling is disabled.

The value of vRtrLdpNgTargPeerBfdEnabled specifies whether BFD tracking is enabled to the transport address of this peering session. When this object has a value of 'true', BFD tracking is enabled. When its value is 'false', BFD tracking is disabled.

The value of vRtrLdpNgTargPeerLsrIfIndex specifies the local interface index that is to be used as source LSR-ID to establish targeted hello adjacency with a LDP peer.

The value of vRtrLdpNgTargPeerAutoCreate indicates whether or not the row entry was automatically created.

The value of vRtrLdpNgTargPeerCreator indicates the creator of this row. A value of 'manual(1)' indicates the entry is created manually by the user. A value of 'template(2)' indicates the entry is auto created by template configuration. A value of 'sdp(3)' indicates the entry is auto created by service manager. Enumeration: 'sdp': 3, 'manual': 1, 'template': 2.

The value of vRtrLdpNgTargPeerTemplName specifies the template name that created this row. This object has valid value when vRtrLdpNgTargPeerCreator has value of template.

The value of vRtrLdpNgTargPeerLocalIpAddrType indicates the type of address indicated by vRtrLdpNgTargPeerLocalIpAddress.

The value of vRtrLdpNgTargPeerLocalIpAddress indicates the local IP address used in Hellos sent.

The vRtrLdpNgTargPeerStatsTable is a read-only table. The purpose of this table is to keep statistical information about the Targeted peers on the LSR. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgTargPeerTable, and the augmenting table, vRtrLdpNgTargPeerStatsTable. This in effect extends the vRtrLdpNgTargPeerTable with additional columns. Creation or deletion of a row in the vRtrLdpNgTargPeerTable results in the same fate for the row in the vRtrLdpNgTargPeerTable.

A row in this table contains statistical information about an LDP Targeted peer. Some counters contained in a row are for fatal errors received during a former LDP Session associated with this entry. For example, an LDP Pdu received on a TCP connection during an LDP Session contains a fatal error. That error is counted here, because the session is terminated. If the error is NOT fatal (i.e. and the Session remains), then the error is counted in the vRtrLdpNgSessionStatsEntry.

The value of vRtrLdpNgTargPeerStatExistingAdj indicates a count of the total active adjacencies with this targeted peer.

The value of vRtrLdpNgTargPeerStatsHelloRecv indicates number of Hello messages received with this targeted peer.

The value of vRtrLdpNgTargPeerStatsHelloSent indicates the number of Hello messages sent with this targeted peer.

The value of vRtrLdpNgTargPeerStatsBadPduLen indicates the number of bad PDU length errors detected with this targeted peer.

The value of vRtrLdpNgTargPeerStatsBadMsgLen indicates the number of bad message length errors detected with this targeted peer.

value of vRtrLdpNgTargPeerStatsMalformTlv indicates the number of malformed TLV value errors detected with this targeted peer.

The value of vRtrLdpNgTargPeerStatsBadProtVer indicates the number of bad protocol version errors detected with this targeted peer.

The value of vRtrLdpNgInetIfTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgInetIfTable was last changed.

vRtrLdpNgInetIfTable provides an entry for each virtual router interface configuration to be used with the Label Distribution Protocol (LDP) for a given Inet address family.

Each row entry represents an interface on this virtual router that participates in the LDP protocol for a given Inet address family. Corresponding interface entry must exist in vRtrLdpNgIfTable before creating an entry in this table. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgInetIfRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgInetIfRowStatus to 'destroy'.

vRtrLdpNgIfAddrType indicates the Inet address family of this interface.

vRtrLdpNgInetIfRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgInetIfTable. A row can be created by setting vRtrLdpNgIfRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. Corresponding interface entry must exit in vRtrLdpNgIfTable before creating an entry in this table. A row entry can be destroyed by setting vRtrLdpNgInetIfRowStatus to 'destroy'.

The value of vRtrLdpNgInetIfUpTime indicates the time, in hundreds of seconds, that the LDP interface has been in current operational state vRtrLdpNgIfOperState. If the value of vRtrLdpNgIfOperState is 'inService (2)', then vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has been operationally up. If the value of vRtrLdpNgIfOperState is 'outOfService (3)', then vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has been operationally down. If the value of vRtrLdpNgIfOperState is 'transition (4)', then vRtrLdpNgInetIfUpTime specifies the time that the LDP interface has been operationally in transition.

The value of vRtrLdpNgInetIfLastChange indicates the sysUpTime when this row was last modified.

The value of vRtrLdpNgInetIfAdminState specifies the desired administrative state for this interface.

The value of vRtrLdpNgInetIfOperState indicates the current operational state of this interface.

The value of vRtrLdpNgInetIfOperDownReason indicates the reason that the LDP interface is operationally down.

Some writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrLdpNgGeneralTable. vRtrLdpIfInheritance controls whether to inherit the operational value of that object, or use the administratively set value. Non mask bits will always have value of zero, and any attempt to change the value will be silently discarded. When the bit for an object has value of one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value. The mask bit(s) will be set to one when set is performed on the inherited object(s). Any attempt to set the mask bit to one will be silently discarded. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrLdpNgGeneralTable. This object is a bit-mask, with the following positions: vRtrLdpNgInetIfKAFactor 0x1 vRtrLdpNgInetIfKATimeout 0x2 vRtrLdpNgInetIfHelloFactor 0x4 vRtrLdpNgInetIfHelloTimeout 0x8 vRtrLdpNgInetIfTransAddrType 0x10

The value of vRtrLdpNgInetIfKAFactor specifies the value by which the keepalive timeout (vRtrLdpNgInetIfKATimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors.

The value of vRtrLdpNgInetIfKATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgInetIfKATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages).

The value of vRtrLdpNgInetIfHelloFactor specifies the value by which the hello timeout (vRtrLdpNgInetIfHelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors.

The value of vRtrLdpNgInetIfHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time.

The value of vRtrLdpNgInetIfOperHelloTimeout indicates the operational hello time also known as hold time used by the operational LDP interface. It is the time interval that LDP waits before declaring a neighbor to be down.

The value of vRtrLdpNgInetIfBackoffTime indicates the initial value for the backoff interval. The backoff interval is the time, in seconds, that LDP waits after an LDP session setup has failed before it attempts to setup the session again. After the LDP session startup fails the first time, the backoff interval is set to the value of vRtrLdpNgInetIfBackoffTime. Thereafter, if session startup fails again the backoff interval increases exponentially.

The value of vRtrLdpNgInetIfMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router waits before retrying) increases exponentially. If the backoff interval exceeds vRtrLdpNgInetIfMaxBackoffTime, the router will give up trying to establish the LDP session.

The value of vRtrLdpNgInetIfTransAddrType specifies the source of the transport address to be used when setting up the LDP TCP sessions. The interface's IP address is used to setup the LDP session between neighbors. If multiple interfaces exist between two neighbors, the 'interface' mode cannot be used since only one LDP session is actually set up between the two neighbors. When the value of this object is 'system', the system's IP address is used to set up the LDP session between neighbors. Enumeration: 'interface': 1, 'system': 2.

The value of vRtrLdpNgInetIfLsrIfType specifies whether the local interface address or the system interface address should be used as source Label Switch Router identifier (LSR-ID) to establish a link LDP adjacency with a LDP peer Enumeration: 'interface': 2, 'system': 1.

The value of vRtrLdpNgInetIfLsrIfIndex specifies the local interface index that is to be used as source LSR-ID to establish link hello adjacency with a LDP peer.

The value of vRtrLdpNgInetIfIPv4P2MPFecCap specifies whether traffic exchange for IPv4 P2MP FECs is enabled or disabled on this interface.

The value of vRtrLdpNgInetIfIPv6P2MPFecCap specifies whether traffic exchange for IPv6 P2MP FECs is enabled or disabled on this interface.

The value of vRtrLdpNgInetIfIPv4PfxFecCap specifies whether traffic exchange for IPv4 prefix FECs is enabled or disabled on this interface.

The value of vRtrLdpNgInetIfIPv6PfxFecCap specifies whether traffic exchange for IPv6 prefix FECs is enabled or disabled this interface.

The value of vRtrLdpNgInetIfLocalIpAddrType indicates the type of address indicated by vRtrLdpNgInetIfLocalIpAddress.

The value of vRtrLdpNgInetIfLocalIpAddress indicates the local IP address used in Hellos sent.

vLdpNgStatsTable is a read-only table. The purpose of this table is to keep statistical information about an LDP Instance. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vLdpNgStatsTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vLdpNgStatsTable.

A row in this table represents statistical information about an LDP instance.

The value of vLdpNgStatsIPv4OperDownEvents indicates the number of times the IPv4 LDP instance has gone operationally down since the instance was created.

The value of vLdpNgStatsIPv6OperDownEvents indicates the number of times the IPv6 LDP instance has gone operationally down since the instance was created.

The value of vLdpNgStatsIPv4ActiveSess indicates the number of active IPv4 sessions (i.e. session in some form of creation) associated with the LDP instance.

The value of vLdpNgStatsIPv6ActiveSess indicates the number of active IPv6 sessions (i.e. session in some form of creation) associated with the LDP instance.

The value of vLdpNgStatsIPv4ActiveLinkAdj indicates the number of active IPv4 link adjacencies (i.e. established adjacencies) associated with the LDP instance.

The value of vLdpNgStatsIPv6ActiveLinkAdj indicates the number of active IPv6 link adjacencies (i.e. established adjacencies) associated with the LDP instance.

The value of vLdpNgStatsIPv4ActiveTargAdj indicates the number of active IPv4 target adjacencies (i.e. established sessions) associated with the LDP instance.

The value of vLdpNgStatsIPv6ActiveTargAdj indicates the number of active IPv6 target adjacencies (i.e. established sessions) associated with the LDP instance.

The value of vLdpNgStatsIPv4ActiveIf indicates the number of active (i.e. operationally up) IPv4 interfaces associated with the LDP instance.

The value of vLdpNgStatsIPv6ActiveIf indicates the number of active (i.e. operationally up) IPv6 interfaces associated with the LDP instance.

The value of vLdpNgStatsIPv4InactiveIf indicates the number of inactive (i.e. operationally down) IPv4 interfaces associated with the LDP instance.

The value of vLdpNgStatsIPv6InactiveIf indicates the number of inactive (i.e. operationally down) IPv6 interfaces associated with the LDP instance.

The value of vLdpNgStatsIPv4ActiveTargPeers indicates the number of configured IPv4 targeted peers that are administratively up in an LDP instance.

The value of vLdpNgStatsIPv6ActiveTargPeers indicates the number of configured IPv6 targeted peers that are administratively up in an LDP instance.

The value of vLdpNgStatsIPv4InactiveTargPeers indicates the number of inactive (i.e. operationally down) IPv4 targeted sessions associated with the LDP instance.

The value of vLdpNgStatsIPv6InactiveTargPeers indicates the number of inactive (i.e. operationally down) IPv6 targeted sessions associated with the LDP instance.

The value of vLdpNgStatsIPv4PfxFecRecv indicates the number of IPv4 Address FECs received by the LDP instance from its neighbors.

The value of vLdpNgStatsIPv6PfxFecRecv indicates the number of IPv6 Address FECs received by the LDP instance from its neighbors.

The value of vLdpNgStatsIPv4PfxFecSent indicates the number of IPv4 Address FECs sent by the LDP instance to its neighbors.

The value of vLdpNgStatsIPv6PfxFecSent indicates the number of IPv6 Address FECs sent by the LDP instance to its neighbors.

The value of vLdpNgStatsFec128FecSent indicates the number of Pseudo wire ID FECs sent by the LDP instance to its neighbors.

The value of vLdpNgStatsFec128FecRecv indicates the number of Pseudo wire ID FECs received by the LDP instance from its neighbors.

The value of vLdpNgStatsFec129FecSent indicates the number of General Pseudo wire ID FECs sent by the LDP instance to its neighbors.

The value of vLdpNgStatsFec129FecRecv indicates the number of General Pseudo wire ID FECs received by the LDP instance from its neighbors.

The value of vLdpNgStatsIPv4AttemptedSessions indicates the total number of attempted IPv4 sessions for this LDP instance.

The value of vLdpNgStatsIPv6AttemptedSessions indicates the total number of attempted IPv6 sessions for this LDP instance.

The value of vLdpNgStatsSessRejNoHelloErrs gives the total number of Session Rejected/No Hello Error Notification Messages sent or received by this LDP instance.

The value of vLdpNgStatsSessRejAdvErrors gives the total number of Session Rejected/Parameters Advertisement Mode Error Notification Messages sent or received by this LDP instance.

The value of vLdpNgStatsSessRejMaxPduErrs gives the total number of Session Rejected/Parameters Max Pdu Length Error Notification Messages sent or received by this LDP instance.

The value of vLdpNgStatsSessRejLblRngeErrs gives the total number of Session Rejected/Parameters Label Range Error Notification Messages sent or received by this LDP instance.

The value of vLdpNgStatsBadLdpIdErrors gives the number of Bad LDP Identifier Fatal Errors detected for sessions associated with this LDP instance.

The value of vLdpNgStatsBadPduLengthErrors gives the number of Bad Pdu Length Fatal Errors detected for sessions associated with this LDP instance.

The value of vLdpNgStatsBadMsgLengthErrors gives the number of Bad Message Length Fatal Errors detected for sessions associated with this LDP instance.

The value of vLdpNgStatsBadTlvLengthErrors gives the number of Bad TLV Length Fatal Errors detected for sessions associated with this LDP instance.

The value of vLdpNgStatsMalformedTlvErrors gives the number of Malformed TLV Value Fatal Errors detected for sessions associated with this LDP instance.

The value of vLdpNgStatsKeepAliveExpErrors gives the number of Session Keep Alive Timer Expired Errors detected for sessions associated with this LDP instance.

The value of vLdpNgStatsShutdownNotifRecv gives the number of Shutdown Notifications received related to sessions associated with this LDP instance.

The value of vLdpNgStatsShutdownNotifSent gives the number of Shutdown Notifications sent related to sessions associated with this LDP instance.

The value of vLdpNgStatsIPv4EgrFecPfxCount indicates the number of IPv4 egress FEC prefix statistics configured for this LDP instance.

The value of vLdpNgStatsIPv6EgrFecPfxCount indicates the number of IPv6 egress FEC prefix statistics configured for this LDP instance.

The value of vLdpNgStatsUnknownTlvErrors indicates the number of Unknown TLV Fatal Errors detected for sessions associated with this LDP instance.

The value of vLdpNgStatsIPv4P2MPFecSent indicates the number of IPv4 P2MP FECs sent by the LDP instance to its neighbors.

The value of vLdpNgStatsIPv6P2MPFecSent indicates the number of IPv6 P2MP FECs sent by the LDP instance to its neighbors.

The value of vLdpNgStatsIPv4P2MPFecRecv indicates the number of IPv4 P2MP FECs received by the LDP instance from its neighbors.

The value of vLdpNgStatsIPv6P2MPFecRecv indicates the number of IPv6 P2MP FECs received by the LDP instance from its neighbors.

The value of vLdpNgStatsIPv4PfxFecOLSessSent indicates the number of Overload Notifications sent for IPv4 address FEC over sessions in LDP instance.

The value of vLdpNgStatsIPv6PfxFecOLSessSent indicates the number of Overload Notifications sent for IPv6 address FEC over sessions in LDP instance.

The value of vLdpNgStatsIPv4PfxFecOLSessRecv indicates the number of Overload Notifications received for IPv4 address FEC over sessions in LDP instance.

The value of vLdpNgStatsIPv6PfxFecOLSessRecv indicates the number of Overload Notifications received for IPv6 address FEC over sessions in LDP instance.

The value of vLdpNgStatsIPv4P2MPFecOLSessSent indicates the number of Overload Notifications sent for IPv4 P2MP FEC over sessions in LDP instance.

The value of vLdpNgStatsIPv6P2MPFecOLSessSent indicates the number of Overload Notifications sent for IPv6 P2MP FEC over sessions in LDP instance.

The value of vLdpNgStatsIPv4P2MPFecOLSessRecv indicates the number of Overload Notifications received for IPv4 P2MP FEC over sessions in LDP instance.

The value of vLdpNgStatsIPv6P2MPFecOLSessRecv indicates the number of Overload Notifications received for IPv6 P2MP FEC over sessions in LDP instance.

The value of vLdpNgStatsFec128FecOLSessSent indicates the number of Overload Notifications sent for PW ID FEC over sessions in LDP instance.

The value of vLdpNgStatsFec128FecOLSessRecv indicates the number of Overload Notifications received for PW ID FEC over sessions in LDP instance.

The value of vLdpNgStatsFec129FecOLSessSent indicates the number of Overload Notifications sent for General PW ID FEC over sessions in LDP instance.

The value of vLdpNgStatsFec129FecOLSessRecv indicates the number of Overload Notifications received for General PW ID FEC over sessions in LDP instance.

The value of vLdpNgStatsIPv4OLoadInterfaces indicates the number of overloaded IPv4 interfaces in LDP instance.

The value of vLdpNgStatsIPv6OLoadInterfaces indicates the number of overloaded IPv6 interfaces in LDP instance.

The value of vLdpNgStatsIPv4OLoadTargPeers indicates the number of overloaded IPv4 targeted peers in LDP instance.

The value of vLdpNgStatsIPv6OLoadTargPeers indicates the number of overloaded IPv6 targeted peers in LDP instance.

The value of vLdpNgStatsIPv4PfxFecInOLoad indicates the number IPv4 Address FEC in overload state in LDP instance.

The value of vLdpNgStatsIPv6PfxFecInOLoad indicates the number IPv6 Address FEC in overload state in LDP instance.

The value of vLdpNgStatsIPv4P2MPFecInOLoad indicates the number IPv4 P2MP FEC in overload state in LDP instance.

The value of vLdpNgStatsIPv6P2MPFecInOLoad indicates the number IPv4 P2MP FEC in overload state in LDP instance.

The value of vLdpNgStatsFec128FecInOLoad indicates the number PW ID FEC in overload state in LDP instance.

The value of vLdpNgStatsFec129FecInOLoad indicates the number General PW ID FEC in overload state in LDP instance.

The value of vLdpNgStatsBadProtVersionErrors indicates the number of bad protocol version errors detected for sessions associated with this LDP instance.

vRtrLdpNgCapabilityTable is a read-only table. The purpose of this table is to keep capability information about an LDP Instance. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpNgCapabilityTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpNgCapabilityTable.

An row in this table contains capability information about an LDP instance.

The value of vRtrLdpNgGenP2MPCapability indicates whether Point-to-Multipoint (P2MP) FEC capability is supported in the LDP instance or not. When the value is 'true', the LDP instance is P2MP capable.

The value of vRtrLdpNgGenMPMBBCapability indicates whether Multipoint(MP) Make-Before-Break (MBB) capability is supported in the LDP instance or not. When the value is 'true', the LDP instance is MP MBB capable.

The value of vRtrLdpNgGenDynamicCapability indicates whether dynamic capability negotiation is supported or not in LDP sessions associated with the LDP instance. When 'true', the LDP instance supports dynamic capability negotiation.

The value of vRtrLdpNgGenOverloadCapability indicates whether LSR Overload is supported or not in LDP sessions associated with the LDP instance. When 'true', the LDP instance is LSR overload capable.

The value of vRtrLdpNgGenFec128Capability indicates whether or not PW (Pseudowire) ID FEC capability is supported in LDP instance.

The value of vRtrLdpNgGenFec129Capability indicates whether or not General PW ID FEC capability is supported in LDP instance.

The value of vRtrLdpNgGenIPv4PfxFecCapability indicates whether or not IPv4 Prefix FEC capability is supported in LDP instance.

The value of vRtrLdpNgGenIPv6PfxFecCapability indicates whether or not IPv6 Prefix FEC capability is supported in LDP instance.

The value of vRtrLdpNgGenUnregNotiCapability indicates whether or not Unrecognized Notification capability is supported in LDP instance.

The value of vRtrLdpNgTcpSessParamsTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgTcpSessParamsTable was last changed.

vRtrLdpNgTcpSessParamsTable is used to configure parameters applicable to TCP transport session of an LDP session to remote peer.

Each row entry represents information applicable to TCP session to far end peer. Row entries can be created or deleted via SNMP SET requests. A row with default attribute values is created by setting vRtrLdpNgTcpSessRowStatus to 'createAndGo'. A row entry can be destroyed by setting vRtrLdpNgTcpSessRowStatus to 'destroy'.

The value of vRtrLdpNgTcpSessPeerAddrType specifies the IP address type for vRtrLdpNgTcpSessPeerAddr.

The value of vRtrLdpNgTcpSessPeerAddr specifies the remote TCP transport address to use for an LDP session to a peer. This value corresponds to peer address (vRtrLdpNgSessPeerAddress) of LDP session.

vRtrLdpNgTcpSessRowStatus is used to control the creation and deletion of rows in the vRtrLdpNgTcpSessParamsTable. A row can be created by setting vRtrLdpNgTcpSessRowStatus to 'createAndGo'. The agent should assign the default attribute values and change the row status to 'active'. A row entry can be destroyed by setting vRtrLdpNgTcpSessRowStatus to 'destroy'.

When the value of vRtrLdpNgTcpSessAuth is 'none', no authentication is used. When the value of this object is 'md5', authentication using MD5 message based digest protocol is enabled. Enumeration: 'none': 1, 'md5': 2.

The string specified in vRtrLdpNgTcpSessAuthKey is the authentication key to be used between two LDP neighbors before establishing TCP transport session of the LDP protocol stream. Authentication is done using the MD-5 message based digest protocol. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. An SNMP Get request on this object should return an OCTET STRING of length 0.

The value of vRtrLdpNgTcpSessAuthKeyChain specifies the keychain which will be used to sign and/or authenticate TCP transport session of the LDP protocol stream. The keychain name is defined by tmnxKeyChainName and is the index for TIMETRA-SECURITY-MIB::tmnxKeyChainTable

The value of vRtrLdpNgTcpSessPMTUDiscovery specifies whether path MTU discovery is enabled for this TCP transport session. When the value is set to 'true', path MTU discovery is enabled for this TCP transport session. When the value is set to 'false', path MTU discovery is disabled.

The value of vRtrLdpNgTcpSessMinTTLValue specifies the minimum TTL value for an incoming LDP packet. If vRtrLdpNgTcpSessMinTTLValue is set to zero (0), the TTL Security feature is disabled.

The value of vRtrLdpNgGeneralTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgGeneralTable was last changed.

vRtrLdpNgGeneralTable has an entry for each virtual router in the system capable of supporting an instance of the Label Distribution Protocol (LDP).

Each row entry represents an instance of the Label Distribution Protocol (LDP) for a virtual router in the system. An entry in this table is created by the agent when vRtrLdpStatus in the vRtrConfTable is set to 'create'. The entry is destroyed when vRtrLdpStatus is set to 'delete' but only if vRtrLdpNgGenAdminState has a value of 'outOfService'.

The value of vRtrLdpNgGenCreateTime indicates the sysUpTime when this LDP instance was created.

The value of vRtrLdpNgGenIPv4UpTime indicates the time, in hundreds of seconds, that the IPv4 LDP instance has been in current operational state (vRtrLdpNgGenIPv4OperState). If the value of vRtrLdpNgGenIPv4OperState is 'inService (2)', then vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance has been operationally up. If the value of vRtrLdpNgGenIPv4OperState is 'outOfService (3)', then vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance has been operationally down. If the value of vRtrLdpNgGenIPv4OperState is 'transition (4)', then vRtrLdpNgGenIPv4UpTime specifies the time that the IPv4 LDP instance has been operationally in transition.

The value of vRtrLdpNgGenIPv6UpTime indicates the time, in hundreds of seconds, that the IPv6 LDP instance has been in current operational state (vRtrLdpNgGenIPv6OperState). If the value of vRtrLdpNgGenIPv6OperState is 'inService (2)', then vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance has been operationally up. If the value of vRtrLdpNgGenIPv6OperState is 'outOfService (3)', then vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance has been operationally down. If the value of vRtrLdpNgGenIPv6OperState is 'transition (4)', then vRtrLdpNgGenIPv6UpTime specifies the time that the IPv6 LDP instance has been operationally in transition.

The value of vRtrLdpNgGenLastChange indicates the sysUpTime when this row was last modified.

The value of vRtrLdpNgGenAdminState specifies the desired administrative state for this LDP instance.

The value of vRtrLdpNgGenIPv4OperState indicates the current operational state of this IPv4 LDP instance.

The value of vRtrLdpNgGenIPv6OperState indicates the current operational state of this IPv6 LDP instance.

The value of vRtrLdpNgGenIPv4OperDownReason indicates the reason that the IPv4 LDP instance is operationally down.

The value of vRtrLdpNgGenIPv6OperDownReason indicates the reason that the IPv6 LDP instance is operationally down.

The value of vRtrLdpNgGenLdpIPv4LsrId is the IPv4 Label Switch Router (LSR) identifier which is used as the first 4 bytes or the Router Id component of the Label Distribution Protocol (LDP) identifier.

The value of vRtrLdpNgGenLdpIPv6LsrId is the IPv6 Label Switch Router (LSR) identifier which is used as the first 16 bytes or the Router Id component of the Label Distribution Protocol (LDP) identifier.

The value of vRtrLdpNgGenProtocolVersion specifies the version of the LDP protocol instance. A value of zero (0) indicates that the version of the protocol is unknown.

The value of vRtrLdpNgGenBackoffTime specifies the initial value for the backoff interval. The backoff interval is the time, in seconds, that LDP waits after an LDP session setup has failed before it attempts to setup the session again. After the LDP session startup fails the first time, the backoff interval is set to the value of vRtrLdpNgGenBackoffTime. Thereafter, if session startup fails again the backoff interval increases exponentially.

The value of vRtrLdpNgGenMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router waits before retrying) increases exponentially. If the backoff interval exceeds vRtrLdpNgGenMaxBackoffTime, the router will give up trying to establish the LDP session. If vRtrLdpNgGenMaxBackoffTime is set to zero (0), then the backoff interval does not increase exponentially after the first session startup attempt fails. Instead it remains constant and LDP will keep retrying to establish a session until it succeeds.

The value of vRtrLdpNgGenTunnelDownDampTime specifies the time interval, in seconds, that LDP waits before posting a tunnel down event to the Route Table Manager. If a tunnel up event is generated before the damping interval has elapsed, a tunnel modify event will be posted to the Route Table Manager (RTM). If this value is set to 0, then tunnel down events are not damped.

The value of vRtrLdpNgGenGracefulRestart specifies whether graceful restart helper is allowed. When this object has a value of 'true', graceful restart helper is enabled. When its value is 'false', graceful restart helper is disabled.

The value of vRtrLdpNgGenGRNbrLiveTime specifies the value for neighbor liveness timer. The amount of time the Label Switching Router (LSR) keeps its stale label-FEC bindings is set to the lesser of the FT Reconnect Timeout, as was advertised by the neighbor, and this local timer, called the Neighbor Liveness Timer. The LSR waits for the specified time till a LDP session re-establishes itself. If within that time the LSR still does not establish an LDP session with the neighbor, all the stale bindings are deleted. This object has meaning only when vRtrLdpNgGenGracefulRestart is 'true'.

The value of vRtrLdpNgGenGRMaxRecoveryTime specifies the local maximum recovery time. If the Label Switching Router (LSR) determines that the neighbor was able to preserve its MPLS forwarding state (as was indicated by the non-zero Recovery Time advertised by the neighbor), the LSR should further keep the stale label-FEC bindings, received from the neighbor, for as long as the lesser of the Recovery Time advertised by the neighbor, and a local configurable value, called Maximum Recovery Time, allows. This object has meaning only when vRtrLdpNgGenGracefulRestart is 'true'.

The value of vRtrLdpNgGenLabelWithdrawalDelay specifies the time interval, in seconds, LDP will delay for the withdrawal of FEC-label binding it distributed to its neighbours when FEC is de-activated. When the timer expires, LDP then sends a label withdrawal for the FEC to all its neighbours. This is applicable only to LDP transport tunnels (ipv4 prefix FECs) and is not applicable to Pseudowires (service FECs). A value of 0 indicates that vRtrLdpNgGenLabelWithdrawalDelay is disabled.

The value of vRtrLdpNgGenImplicitNull specifies whether or not to signal implicit null values for all LDP FECs for which this node is an egress Label Edge Router (LER). When the value is true implicit null values are signaled.

The value of vRtrLdpNgGenShortTTLPropLocal specifies whether or not to enable the propagation of time to live (TTL) from the header of IP packet into the header of resulting MPLS packet for all local packets forwarded over a LDP shortcut. When the value is set to 'true' TTL is propagated from the header of IP packet into the header of the resulting MPLS packet for all local packets.

The value of vRtrLdpNgGenShortTTLPropTransit specifies whether or not to enable the propagation of time to live (TTL) from the header of IP packet into the header of resulting MPLS packet for all transit packets forwarded over a LDP shortcut. When the value is set to 'true' TTL is propagated from the header of IP packet into the header of the resulting MPLS packet for all transit packets.

The value of vRtrLdpNgGenMPMBBTime specifies the maximum time a Multi Point (MP) transit node must wait before switching over to a new path if the new node does not send Make Before Break (MBB) Tag Length Value (TLV) to inform of the availability of the data plane.

The value of vRtrLdpNgGenLdpFrr specifies whether fast re-route of LDP tunnel is enabled or disabled. When the value of vRtrLdpNgGenLdpFrr is set to 'true' fast re-route of LDP tunnel is enabled and when vRtrLdpNgGenLdpFrr is set to 'false' fast re-route of LDP tunnel is disabled. When disabling vRtrLdpNgGenLdpFrr, the setting for FRR via segmented-routing tunnel stitching (vRtrLdpNgGenFrrSRStitch) must also be disabled.

The value of vRtrLdpNgGenMcastUpstreamFrr specifies whether mLDP fast upstream switchover feature is enabled or not for the LDP instance. When 'true', the LDP instance supports mLDP fast upstream switchover.

When vRtrLdpNgGenDeaggregateFec has a value of 'false', LDP aggregates multiple prefixes into a single Forwarding Equivalence Class (FEC) and advertises a single label for the FEC. When the value is 'true', LDP deaggregates prefixes into multiple FECs.

The value of vRtrLdpNgGenControlMode specifies the mode used for distributing labels in response to label binding requests. When vRtrLdpNgGenControlMode has a value of 'ordered', label bindings are not distributed in response to a label request until a label binding has been received from the next hop for the destination. When vRtrLdpNgGenControlMode has a value of 'independent', label bindings are distributed immediately in response to a label request even if a label binding has not yet been received from the next hop for the destination. Enumeration: 'independent': 2, 'ordered': 1.

The value of vRtrLdpNgGenDistMethod specifies the label distribution method used. When vRtrLdpNgGenDistMethod has a value of 'downstreamOnDemand', label bindings are distributed to the upstream LSR, for each FEC, without requiring a request message for the FEC from the upstream LSR. When vRtrLdpNgGenDistMethod has a value of 'downstreamUnsolicited', label bindings are distributed to the upstream LSR only when a label request message is received.

The value of vRtrLdpNgGenRetentionMode specifies the label retention mode used. If the value of this object is 'conservative', then advertised label mappings are retained only if they will be used to forward packets, i.e. if the label came from a valid next hop. Label bindings received from non-nexthops for each FEC are discarded. If the value of this object is 'liberal', then all advertised label mappings are retained whether they are from a valid next hop or not. When vRtrLdpNgGenDistMethod has a value of 'downstreamUnsolicited', a LSR may receive label bindings for the same destination for all its neighbors. Labels for the non-nexthops for the FECs are retained in the software but not used. When a network topology change occurs where a non-nexthop becomes a true next hop, the label received earlier is then used. Enumeration: 'liberal': 2, 'conservative': 1.

The value of vRtrLdpNgGenPropagatePolicy determines whether the LSR should generate FECs and which FECs it should generate. When the value of this object is 'system', LDP will distribute label bindings only for the router's system IP address When the value of this object is 'interface', LDP will distribute label bindings for all LDP interfaces When the value of this object is 'all', LDP will distribute label bindings for all prefixes in the routing table When the value of this object is 'none', LDP will not distribute any label bindings.

The value of vRtrLdpNgGenLoopDetectCap indicates whether this LSR supports loop detection and if so, what type of loop detection is supported. When the value is 'none' loop detection is not supported on this LSR. When the value is 'other' Loop Detection is supported but by a method other than those listed below. When the value is 'hopCount' Loop Detection is supported by Hop Count only. When the value is 'pathVector' Loop Detection is supported by Path Vector only. When the value is 'hopCountAndPathVector' Loop Detection is supported by both Hop Count and Path Vector. Since Loop Detection is determined during Session Initialization, an individual session may not be running with loop detection. This object simply gives an indication of whether or not the LSR has the ability to support Loop Detection and which types. Enumeration: 'hopCountAndPathVector': 5, 'none': 1, 'other': 2, 'hopCount': 3, 'pathVector': 4.

The value of vRtrLdpNgGenHopLimit specifies the maximum allowable value for the hop count. The value of this object is valid and used only if vRtrLdpNgGenLoopDetectCap has a value of either 'hopCount' or 'hopCountAndPathVector'.

The value of vRtrLdpNgGenPathVectorLimit specifies the maximum allowable value for the path vector count. The value of this object is valid and used only if vRtrLdpNgGenLoopDetectCap has a value of either 'pathVector' or 'hopCountAndPathVector'.

The value of vRtrLdpNgGenRoutePreference specifies the route preference assigned to LDP routes. When multiple routes are available to a destination, the route with the lowest preference will be used.

The value of vRtrLdpNgGenClassForwarding indicates whether class forwarding is enabled or not for LDP-over-RSVP.

The value of vRtrLdpNgGenIpv4LsrInterop specifies if interoperability with legacy IPv4 LSR implementations which do not comply to the processing of Hello TLVs with the U-bit set is allowed.

The value of vRtrLdpNgGenEntropyLblCapability specifies whether entropy label capability is enabled or not on the LDP node. When the value of vRtrLdpNgGenEntropyLblCapability is set to 'true', the egress LER will advertise that it is capable of receiving and processing the entropy label.

The value of vRtrLdpNgGenFrrSRStitch specifies whether fast re-route of LDP tunnel via a segmented-routing tunnel is enabled or disabled. When the value of vRtrLdpNgGenFrrSRStitch is set to 'true' fast re-route of LDP tunnel via SR tunnel is enabled and when vRtrLdpNgGenFrrSRStitch is set to 'false' fast re-route of LDP tunnel via SR tunnel is disabled. Regular LDP FRR must be enabled via vRtrLdpNgGenLdpFrr in order to enable FRR via segmented-routing tunnel stitching.

The value of vRtrLdpNgPolicyTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgPolicyTable was last changed.

vRtrLdpNgGeneralTable keeps information about LDP policies. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpTargTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpTargTable.

A row in this table represents information about the policy configuration in LDP

The value of vRtrLdpNgPolRowLastCh indicates the timestamp when this row was last modified.

The value of vRtrLdpNgPolImportPolicy1 specifies the first import policy used to filter LDP label bindings received from LDP peers.

The value of vRtrLdpNgPolImportPolicy2 specifies the second import policy used to filter LDP label bindings received from LDP peers.

The value of vRtrLdpNgPolImportPolicy3 specifies the third import policy used to filter LDP label bindings received from LDP peers.

The value of vRtrLdpNgPolImportPolicy4 specifies the fourth import policy used to filter LDP label bindings received from LDP peers.

The value of vRtrLdpNgPolImportPolicy5 specifies the fifth import policy used to filter LDP label bindings received from LDP peers.

The value of vRtrLdpNgPolExportPolicy1 specifies the first export policy used to filter LDP label bindings advertised to LDP peers.

The value of vRtrLdpNgPolExportPolicy2 specifies the second export policy used to filter LDP label bindings advertised to LDP peers.

The value of vRtrLdpNgPolExportPolicy3 specifies the third export policy used to filter LDP label bindings advertised to LDP peers.

The value of vRtrLdpNgPolExportPolicy4 specifies the fourth export policy used to filter LDP label bindings advertised to LDP peers.

The value of vRtrLdpNgPolExportPolicy5 specifies the fifth export policy used to filter LDP label bindings advertised to LDP peers.

The value of vRtrLdpNgPolTunlTblExportPolicy1 specifies the first tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.

The value of vRtrLdpNgPolTunlTblExportPolicy2 specifies the second tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.

The value of vRtrLdpNgPolTunlTblExportPolicy3 specifies the third tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.

The value of vRtrLdpNgPolTunlTblExportPolicy4 specifies the fourth tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.

The value of vRtrLdpNgPolTunlTblExportPolicy5 specifies the fifth tunnel table export policy used for exporting tunneled routes from the CPM tunnel table as LDP FEC.

The value of vRtrLdpNgIfParamsTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgIfParamsTable was last changed.

vRtrLdpNgIfParamsTable keeps information applicable to the interfaces in LDP. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpNgIfParamsTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpNgIfParamsTable.

A row in this table represents information applicable to the interfaces in LDP.

The value of vRtrLdpNgIfParamRowLastCh indicates the timestamp when this row was last modified.

The value of vRtrLdpNgIfParamIPv4KAFactor specifies the value by which the keepalive timeout (vRtrLdpNgIfParamKeepAliveTimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors. This value is only applicable to LDP IPv4 interfaces.

The value of vRtrLdpNgIfParamIPv6KAFactor specifies the value by which the keepalive timeout (vRtrLdpNgIfParamKeepAliveTimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors. This value is only applicable to LDP IPv6 interfaces.

The value of vRtrLdpNgIfParamIPv4KATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgIfParamIPv4KATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages). This value is only applicable to LDP IPv4 interfaces.

The value of vRtrLdpNgIfParamIPv6KATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgIfParamIPv6KATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages). This value is only applicable to LDP IPv6 interfaces.

The value of vRtrLdpNgIfParamIPv4HelloFactor specifies the value by which the hello timeout (vRtrLdpNgIfParamIPv4HelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors. This value is only applicable to LDP IPv4 interfaces.

The value of vRtrLdpNgIfParamIPv6HelloFactor specifies the value by which the hello timeout (vRtrLdpNgIfParamIPv6HelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors. This value is only applicable to LDP IPv6 interfaces.

The value of vRtrLdpNgIfParamIPv4HelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time. This value is only applicable to LDP IPv4 interfaces.

The value of vRtrLdpNgIfParamIPv6HelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time. This value is only applicable to LDP IPv6 interfaces.

The value of vRtrLdpNgIfParamIPv4TransAddrTyp specifies the source of the transport address to be used when setting up the LDP TCP sessions. The transport address can be configured globally (applied to all interfaces) or per interface. When the value of this object is 'interface', the interface's IP address is used to setup the LDP session between neighbors. If multiple interfaces exist between two neighbors, the 'interface' mode cannot be used since only one LDP session is actually set up between the two neighbors. When the value of this object is 'system', the system's IP address is used to set up the LDP session between neighbors. This value is only applicable to LDP IPv4 interfaces. Enumeration: 'interface': 1, 'system': 2.

The value of vRtrLdpNgIfParamIPv6TransAddrTyp specifies the source of the transport address to be used when setting up the LDP TCP sessions. The transport address can be configured globally (applied to all interfaces) or per interface. When the value of this object is 'interface', the interface's IP address is used to setup the LDP session between neighbors. If multiple interfaces exist between two neighbors, the 'interface' mode cannot be used since only one LDP session is actually set up between the two neighbors. When the value of this object is 'system', the system's IP address is used to set up the LDP session between neighbors. This value is only applicable to LDP IPv6 interfaces. Enumeration: 'interface': 1, 'system': 2.

The value of vRtrLdpNgTargTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgTargTable was last changed.

vRtrLdpNgTargTable keeps information applicable to the LDP targeted peers. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpNgTargTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpNgTargTable.

A row in this table represents information applicable to the LDP targeted peers in virtual router instance.

The value of vRtrLdpNgTargRowLastCh indicates the timestamp when this row was last modified.

The value of vRtrLdpNgTargImportPolicy1 specifies the import route policy to determine which routes are accepted from targeted LDP neighbors. A maximum of 5 policies can be specified. vRtrLdpNgTargImportPolicy1 specifies the first policy.

The value of vRtrLdpNgTargImportPolicy2 specifies the second import policy used to determine which routes are accepted from targeted LDP neighbors.

The value of vRtrLdpNgTargImportPolicy3 specifies the third import policy used to determine which routes are accepted from targeted LDP neighbors.

The value of vRtrLdpNgTargImportPolicy4 specifies the fourth import policy to determine which routes are accepted from targeted LDP neighbors.

The value of vRtrLdpNgTargImportPolicy5 specifies the fifth import policy used to determine which routes are accepted from targeted LDP neighbors.

The value of vRtrLdpNgTargExportPolicy1 specifies the export route policy used to determine which routes are exported to this targeted LDP session. A maximum of 5 policies can be specified. vRtrLdpNgTargExportPolicy1 specifies the first policy.

The value of vRtrLdpNgTargExportPolicy2 specifies the second export policy used to determine which routes are exported to this targeted LDP session

The value of vRtrLdpNgTargExportPolicy3 specifies the third export policy used to determine which routes are exported to this targeted LDP session.

The value of vRtrLdpNgTargExportPolicy4 specifies the fourth export policy used to determine which routes are exported to this targeted LDP session.

The value of vRtrLdpNgTargExportPolicy5 specifies the fifth export policy used to determine which routes are exported to this targeted LDP session.

The value of vRtrLdpNgTargTunnelPreference indicates whether LDP over tunnel is preferred when link-level LDP bindings are also available. If this value is 'true', then LDP tunnels are preferred and if the value is 'false' then LDP over tunnel is preferred. By default LDP tunnels are preferred.

The value of vRtrLdpNgTargetedSessions specifies whether or not targeted sessions are allowed. Targeted sessions are LDP sessions between indirectly connected peers. The discovery messages for an indirect LDP session are addressed to the specified peer instead of to the multicast address. When this object has a value of 'true', targeted sessions are enabled. When its value is 'false', targeted sessions are disabled.

The value of vRtrLdpNgTargIPv4KAFactor specifies the value by which the keepalive timeout (vRtrLdpNgTargKATimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors. This value is only applicable to IPv4 targeted LDP peer.

The value of vRtrLdpNgTargIPv6KAFactor specifies the value by which the keepalive timeout (vRtrLdpNgTargKATimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepalive messages. LDP keepalive messages are sent to keep the LDP session from timing out when no other LDP traffic is being sent between the neighbors. This value is only applicable to IPv6 targeted LDP peer.

The value of vRtrLdpNgTargIPv4KATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgTargIPv4KATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages). This value is only applicable to IPv4 LDP targeted peer.

The value of vRtrLdpNgTargIPv6KATimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Generally the value of vRtrLdpNgTargIPv6KATimeout is configured to be 3 times the keepalive time (the time interval between successive LDP keepalive messages). This value is only applicable to IPv6 LDP targeted peer.

The value of vRtrLdpNgTargIPv4HelloFactor specifies the value by which the hello timeout (vRtrLdpNgTargIPv4HelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors. This value is only applicable to IPv4 LDP targeted peer.

The value of vRtrLdpNgTargIPv6HelloFactor specifies the value by which the hello timeout (vRtrLdpNgTargIPv6HelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP uses hello messages to discover neighbors and to detect loss of connectivity with its neighbors. This value is only applicable to IPv6 LDP targeted peer.

The value of vRtrLdpNgTargIPv4HelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time. This value is only applicable to IPv4 LDP targeted peer.

The value of vRtrLdpNgTargIPv6HelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and is sent in the hello messages to a neighbor. Hello timeout cannot be set to a value that is less than 3 times the hello time. This value is only applicable to IPv6 LDP targeted peer.

The value of vRtrLdpNgTargIPv4HelloReduction specifies whether hello reduction to this targeted peer is enabled or not. If enabled, the sender advertises further dampened vRtrLdpNgTargIPv4HelloTimeout, to the targeted peer after LDP session is established. The value of 'true' means targeted hello reduction is enabled.

The value of vRtrLdpNgTargIPv6HelloReduction specifies whether hello reduction to this targeted peer is enabled or not. If enabled, the sender advertises further dampened vRtrLdpNgTargIPv6HelloTimeout, to the targeted peer after LDP session is established. The value of 'true' means targeted hello reduction is enabled.

The value of vRtrLdpNgTargIPv4HelloReduceFctr specifies the number of hello messages that are sent at consistent vRtrLdpNgTargIPv4HelloTimeout, before advertising further dampened vRtrLdpNgTargIPv4HelloTimeout. An 'inconsistentValue' error is returned if this object is set when vRtrLdpNgTargIPv4HelloReduction is disabled.

The value of vRtrLdpNgTargIPv6HelloReduceFctr specifies the number of hello messages that are sent at consistent vRtrLdpNgTargIPv6HelloTimeout, before advertising further dampened vRtrLdpNgTargIPv6HelloTimeout. An 'inconsistentValue' error is returned if this object is set when vRtrLdpNgTargIPv6HelloReduction is disabled.

The value of vRtrLdpNgAggrPreMatchTableLstCh indicates the last timestamp when an entry in the vRtrLdpNgAggrPreMatchTable was last changed.

vRtrLdpNgAggrPreMatchTable keeps information about aggregate prefix match procedures. Use of AUGMENTS clause implies a one-to-one dependent relationship between the base table, vRtrLdpNgGeneralTable, and the augmenting table, vRtrLdpNgAggrPreMatchTable. This in effect extends the vRtrLdpNgGeneralTable with additional columns. Creation or deletion of a row in the vRtrLdpNgGeneralTable results in the same fate for the row in the vRtrLdpNgAggrPreMatchTable.

A row in this table represents information about the aggregate prefix match procedures.

The value of vRtrLdpNgAggrPreMatchRowLastCh indicates the timestamp when this row was last modified.

The value of vRtrLdpNgAggrPreMatchEnabled specifies whether aggregate prefix match procedures are enabled.

The value of vRtrLdpNgAggrPreMatchExcPolicy1 specifies the policy name containing the prefixes to be excluded from the aggregate prefix match procedures. A maximum of 5 policies can be specified. vRtrLdpNgAggrPreMatchExcPolicy1 specifies the first policy.

The value of vRtrLdpNgAggrPreMatchExcPolicy2 specifies the second policy name containing the prefixes to be excluded from the aggregate prefix match procedures.

The value of vRtrLdpNgAggrPreMatchExcPolicy3 specifies the third policy name containing the prefixes to be excluded from the aggregate prefix match procedures.

The value of vRtrLdpNgAggrPreMatchExcPolicy4 specifies the fourth policy name containing the prefixes to be excluded from the aggregate prefix match procedures.

The value of vRtrLdpNgAggrPreMatchExcPolicy5 specifies the fifth policy name containing the prefixes to be excluded from the aggregate prefix match procedures.

The value of vRtrLdpNgAggrPreMatchAdminState specifies whether the aggregate prefix procedures will be used by LDP.

The value of vRtrLdpNgSessOperThresLevel indicates whether the number of fec-bindings has exceeded or is below the configured fec threshold. Enumeration: 'down': 1, 'up': 0.

The value of vRtrLdpNgInstNotifyReasonCode indicates the reason for the LDP instance state change. Enumeration: 'adminDown': 2, 'adminUp': 1, 'operUp': 3, 'operDown': 4.

The value of vRtrLdpNgSessOverloadState indicates if session is overload or not.

The value of vRtrLdpNgSessOverloadDirection indicates if the LDP Overload Notification message is sent to or received from the peer. Enumeration: 'received': 2, 'sent': 1.

The value of vRtrLdpNgSessOverloadFecType indicates the overloaded FEC type. Enumeration: 'prefixes': 1, 'svcFec128': 3, 'svcFec129': 4, 'p2mp': 2.

The value of vRtrLdpNgSessOvldFecTypeSubTyp indicates the sub type for overloaded FEC type. Enumeration: 'allVcType': 3, 'ipv4': 1, 'ipv6': 2.

vLdpNgAddrActiveFecTable is a read-only table that represents all active in data plane address FECs either sent to or received from an LDP peer known to the Virtual Router.