TELECOM-MIB: View SNMP OID List / Download MIB

VENDOR: PHOENIXTEC POWER CO.


 Home MIB: TELECOM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ppc 1.3.6.1.4.1.935
         device 1.3.6.1.4.1.935.10
               matAgent 1.3.6.1.4.1.935.10.2
                   matObjects 1.3.6.1.4.1.935.10.2.1
                       matController 1.3.6.1.4.1.935.10.2.1.1
                           matConSerialNum 1.3.6.1.4.1.935.10.2.1.1.1 displaystring read-only
Controller serial number.
                           matConName 1.3.6.1.4.1.935.10.2.1.1.2 displaystring read-only
Power system name.
                           matConWarningState 1.3.6.1.4.1.935.10.2.1.1.3 displaystring read-only
The values indicate the unrestored traps. For example, if 'Controller Battery Low' and 'Controller temperature High' the agent send the trap 85 and trap 87 to NMS, so the value of matConWarningState should be '85,87'. And then the two events restored, the value of matConWarningState should change to empty.
                           matConTemperature 1.3.6.1.4.1.935.10.2.1.1.4 integer read-only
Temperature of the controller, the unit is 0.1 degree.
                           matAgentSoftwareVerison 1.3.6.1.4.1.935.10.2.1.1.5 displaystring read-only
The Network Management Card software/firmware version.
                       matInverter 1.3.6.1.4.1.935.10.2.1.2
                           matInvModuleNum 1.3.6.1.4.1.935.10.2.1.2.1 integer read-only
The number of Inverter modules.
                           matInvTable 1.3.6.1.4.1.935.10.2.1.2.2 no-access
This table list Inverter message.
                               matInvEntry 1.3.6.1.4.1.935.10.2.1.2.2.1 no-access
An entry containing information applicable to a particular Inverter module.
                                   matInvModuleIndex 1.3.6.1.4.1.935.10.2.1.2.2.1.1 positiveinteger no-access
The index of Inverter module.
                                   matInvSerialNum 1.3.6.1.4.1.935.10.2.1.2.2.1.2 displaystring read-only
Module serial number.
                                   matInvFirmwareVersion 1.3.6.1.4.1.935.10.2.1.2.2.1.3 displaystring read-only
Firmware version.
                                   matInvHardwareVersion 1.3.6.1.4.1.935.10.2.1.2.2.1.4 displaystring read-only
Hardware version.
                                   matInvWarningState 1.3.6.1.4.1.935.10.2.1.2.2.1.5 displaystring read-only
The values indicate the unrestored traps. For example, if 'Inverter fault' and 'Inverter Over-loading' the agent send the trap 1 and trap 3 to NMS, so the value of matConWarningState should be '1,3'. And then the two events restored, the value of matConWarningState should change to empty.
                                   matInvOutputVoltage 1.3.6.1.4.1.935.10.2.1.2.2.1.6 nonnegativeinteger read-only
Inverter Output Voltage, the unit is 0.1 Volt.
                                   matInvOutputCurrent 1.3.6.1.4.1.935.10.2.1.2.2.1.7 nonnegativeinteger read-only
Inverter Output Current, unit is 0.1 amp.
                                   matInvBatteryVoltage 1.3.6.1.4.1.935.10.2.1.2.2.1.8 nonnegativeinteger read-only
Inverter Battery voltage, the unit is 0.1 Volt.
                                   matInvOutputFreq 1.3.6.1.4.1.935.10.2.1.2.2.1.9 nonnegativeinteger read-only
Output frequency, the unit is 0.1 Hz.
                                   matInvOutputPower 1.3.6.1.4.1.935.10.2.1.2.2.1.10 nonnegativeinteger read-only
Output power, the unit is VA.
                                   matInvPowerLimit 1.3.6.1.4.1.935.10.2.1.2.2.1.11 nonnegativeinteger read-only
Power Limit Status of Inverter module, the unit is percent.
                                   matInvRunTime 1.3.6.1.4.1.935.10.2.1.2.2.1.12 nonnegativeinteger read-only
Run time, the unit is Hour.
                                   matInvTemperature 1.3.6.1.4.1.935.10.2.1.2.2.1.13 integer read-only
Temperature of the inverter, the unit is 0.1 degree.
                                   matInvLineVoltage 1.3.6.1.4.1.935.10.2.1.2.2.1.14 nonnegativeinteger read-only
Line voltage of 3.5K, the unit is 0.1 Volt.
                                   matInvLineFreq 1.3.6.1.4.1.935.10.2.1.2.2.1.15 nonnegativeinteger read-only
Line frequency of 3.5K, the unit is 0.1 Hz.
                                   matInvMbsPosition 1.3.6.1.4.1.935.10.2.1.2.2.1.16 integer read-only
MBS position of 3.5K. Enumeration: 'transfer': 1, 'bypass': 3, 'invalid': 4, 'normal': 2.
                                   matInvRunMode 1.3.6.1.4.1.935.10.2.1.2.2.1.17 integer read-only
Currently run mode of 3.5K. Enumeration: 'standby': 2, 'fault': 6, 'battery': 5, 'bypass': 3, 'line': 4, 'powerOn': 1.
                                   matInvPriority 1.3.6.1.4.1.935.10.2.1.2.2.1.18 integer read-only
Priority of 3.5K. Enumeration: 'lineMode': 2, 'batteryMode': 1.
                                   matConfInvOutputVoltage 1.3.6.1.4.1.935.10.2.1.2.2.1.19 nonnegativeinteger read-only
Rating Output voltage, the unit is 0.1 Volt.
                                   matConfInvInputVoltage 1.3.6.1.4.1.935.10.2.1.2.2.1.20 nonnegativeinteger read-only
Rating Input voltage, the unit is 0.1 Volt.
                                   matConfInvOutputVoltHighLoss 1.3.6.1.4.1.935.10.2.1.2.2.1.21 nonnegativeinteger read-only
Output High Loss voltage, the unit is 0.1 Volt.
                                   matConfInvOutputVoltLowLoss 1.3.6.1.4.1.935.10.2.1.2.2.1.22 nonnegativeinteger read-only
Output Low loss voltage, the unit is 0.1 Volt.
                                   matConfInvOutputPower 1.3.6.1.4.1.935.10.2.1.2.2.1.23 nonnegativeinteger read-only
Rating output power, the unit is VA.
                                   matConfInvOutputFreq 1.3.6.1.4.1.935.10.2.1.2.2.1.24 nonnegativeinteger read-only
Rating output frequency, the unit is 0.1 Hz.
                                   matInvPhaseType 1.3.6.1.4.1.935.10.2.1.2.2.1.25 integer read-only
Phase type. Enumeration: 'singlePhase': 1, 'threePhase': 2.
                                   matInvOnOffStatus 1.3.6.1.4.1.935.10.2.1.2.2.1.26 integer read-write
Inverter module On/Off status. Enumeration: 'start': 2, 'shutdown': 1.
                       matSts 1.3.6.1.4.1.935.10.2.1.3
                           matStsModuleNum 1.3.6.1.4.1.935.10.2.1.3.1 integer read-only
The number of STS modules.
                           matStsTable 1.3.6.1.4.1.935.10.2.1.3.2 no-access
This table list STS message.
                               matStsEntry 1.3.6.1.4.1.935.10.2.1.3.2.1 no-access
An entry containing information applicable to a particular STS module.
                                   matStsModuleIndex 1.3.6.1.4.1.935.10.2.1.3.2.1.1 positiveinteger no-access
The index of STS module.
                                   matStsModuleType 1.3.6.1.4.1.935.10.2.1.3.2.1.2 displaystring read-only
Module type, 050 represent 50A, 100 represent 100A.
                                   matStsSerialNum 1.3.6.1.4.1.935.10.2.1.3.2.1.3 displaystring read-only
Module serial number.
                                   matStsFirmwareVersion 1.3.6.1.4.1.935.10.2.1.3.2.1.4 displaystring read-only
Firmware version.
                                   matStsHardwareVersion 1.3.6.1.4.1.935.10.2.1.3.2.1.5 displaystring read-only
Hardware version.
                                   matStsWarningState 1.3.6.1.4.1.935.10.2.1.3.2.1.6 displaystring read-only
The values indicate the unrestored traps. For example, if 'STS running in fault mode' and 'STS fan fault' the agent send the trap 59 and trap 61 to NMS, so the value of matConWarningState should be '59,61'. And then the two events restored, the value of matConWarningState should change to empty.
                                   matStsMainInputVoltage 1.3.6.1.4.1.935.10.2.1.3.2.1.7 nonnegativeinteger read-only
STS Mains I/P voltage, the unit is 0.1 Volts.
                                   matStsMainInputFreq 1.3.6.1.4.1.935.10.2.1.3.2.1.8 nonnegativeinteger read-only
STS Mains I/P frequency, the unit is 0.1 Hz.
                                   matStsInvInputVoltage 1.3.6.1.4.1.935.10.2.1.3.2.1.9 nonnegativeinteger read-only
STS INV I/P voltage, the unit is 0.1 volts.
                                   matStsInvInputFreq 1.3.6.1.4.1.935.10.2.1.3.2.1.10 nonnegativeinteger read-only
STS INV I/P frequency, the unit is 0.1 Hz.
                                   matStsOutputVoltage 1.3.6.1.4.1.935.10.2.1.3.2.1.11 nonnegativeinteger read-only
STS O/P voltage, the unit is 0.1 volts.
                                   matStsOutputCurrent 1.3.6.1.4.1.935.10.2.1.3.2.1.12 nonnegativeinteger read-only
STS O/P Current, the unit is 0.1 amp.
                                   matStsOutputPower 1.3.6.1.4.1.935.10.2.1.3.2.1.13 nonnegativeinteger read-only
STS O/P Power, the unit is VA.
                                   matStsOutputFreq 1.3.6.1.4.1.935.10.2.1.3.2.1.14 nonnegativeinteger read-only
STS O/P frequency, the unit is 0.1 Hz.
                                   matStsRuntime 1.3.6.1.4.1.935.10.2.1.3.2.1.15 nonnegativeinteger read-only
STS Runtime, the unit is Hour.
                                   matStsTemperature 1.3.6.1.4.1.935.10.2.1.3.2.1.16 integer read-only
STS module's Temperature, the unit is 0.1 degree.
                                   matStsMbsStatus 1.3.6.1.4.1.935.10.2.1.3.2.1.17 integer read-only
STS MBS status. Enumeration: 'ibpPosition': 3, 'mssPosition': 4, 'normalPosition': 1, 'mbsError': 6, 'issPosition': 2, 'mbpPosition': 5.
                                   matStsStatus 1.3.6.1.4.1.935.10.2.1.3.2.1.18 integer read-only
STS status. Enumeration: 'offLine': 2, 'onLine': 1.
                                   matStsRunningMode 1.3.6.1.4.1.935.10.2.1.3.2.1.19 integer read-only
STS Running Mode. Enumeration: 'inverter': 1, 'mains': 2, 'noOutput': 3.
                                   matStsMainHighLossVoltage 1.3.6.1.4.1.935.10.2.1.3.2.1.20 nonnegativeinteger read-only
STS Main high loss voltage, the unit is 0.1 volts.
                                   matStsMainLowLossVoltage 1.3.6.1.4.1.935.10.2.1.3.2.1.21 nonnegativeinteger read-only
STS Main low loss voltag, the unit is 0.1 volts.
                                   matStsInvHighLossVoltage 1.3.6.1.4.1.935.10.2.1.3.2.1.22 nonnegativeinteger read-only
STS Inverter high loss voltage, the unit is 0.1 volts.
                                   matStsInvLosLossVoltage 1.3.6.1.4.1.935.10.2.1.3.2.1.23 nonnegativeinteger read-only
STS Inverter low loss voltage, the unit is 0.1 volts.
                       matDryContact 1.3.6.1.4.1.935.10.2.1.4
                           matDryContactNum 1.3.6.1.4.1.935.10.2.1.4.1 integer read-only
The number of dry contact.
                           matDryContactTable 1.3.6.1.4.1.935.10.2.1.4.2 no-access
This table list dry contact message.
                               matDryContactEntry 1.3.6.1.4.1.935.10.2.1.4.2.1 no-access
An entry containing information of one dry contact.
                                   matDryContactIndex 1.3.6.1.4.1.935.10.2.1.4.2.1.1 positiveinteger no-access
The index of dry contact.
                                   matDryContactString 1.3.6.1.4.1.935.10.2.1.4.2.1.2 displaystring read-write
format: xx xx xx xx xx xx xx xx xx xx, xx: alarm code. If the configured alarm is less than 10, then fill the position with '--' to instead 'xx'. Alarm code: Inverter fault 0x01(for 3.5Kva system and 1.5Kva system), Inverter over load 0x02(for 3.5Kva system and 1.5Kva system), Inverter fan fault 0x03(for 3.5Kva system and 1.5Kva system), Inverter power limit 0x04(for 3.5Kva system and 1.5Kva system), Inverter DC input Abnormal 0x05(for 3.5Kva system and 1.5Kva system), Inverter low volt off 0x06(for 3.5Kva system and 1.5Kva system), Inverter lost 0x07(for 3.5Kva system and 1.5Kva system), Inverter Mains unavailable 0x19(for 3.5Kva system), Inverter Maintenance Bypass 0x1A(for 3.5Kva system), Inverter Output 0x1B(for 3.5Kva system), STS Inv unavailable 0x2A(for 1.5Kva system), STS Main unavailable 0x2B(for 1.5Kva system), STS Output overload 0x2C(for 1.5Kva system), STS OP Short circuit 0x2D(for 1.5Kva system), STS K1 Relay open 0x23(for 1.5Kva system), STS SCR1 short 0x24(for 1.5Kva system), STS SCR2 short 0x25(for 1.5Kva system), STS INV Bypass Mode 0x2F(for 1.5Kva system), STS Over temperature 0x30(for 1.5Kva system), STS MBS Abnormal 0x31(for 1.5Kva system), STS Fan Lock 0x27(for 1.5Kva system), STS Fault Mode 0x26(for 1.5Kva system), STS Eeprom Fault 0x28(for 1.5Kva system), SPS Power Fail 0x32(for 1.5Kva system), STS Output abnormal 0x34(for 1.5Kva system), STS Maintenance Bypass 0x35(for 1.5Kva system), STS Output 0x36(for 1.5Kva system), Controller temperature high 0x42(for 3.5Kva system and 1.5Kva system), Controller eeprom fail 0x43(for 3.5Kva system and 1.5Kva system), Controller CAN Bus Off 0x45(for 3.5Kva system and 1.5Kva system)
                       matConfig 1.3.6.1.4.1.935.10.2.1.5
                           matConfInvSysOutputFreq 1.3.6.1.4.1.935.10.2.1.5.1 nonnegativeinteger read-write
Inverter system output frequency, can be 500 or 600, the unit is 0.1 Hz.
                           matConfInvSysOutputVolt 1.3.6.1.4.1.935.10.2.1.5.2 nonnegativeinteger read-write
Inverter system output voltage, can be 1100, 1150,1200,2080,2200,2300,2400. The unit is 0.1 Volt.
                           matConfInvSysOutputVoltHighLoss 1.3.6.1.4.1.935.10.2.1.5.3 nonnegativeinteger read-write
Output voltage high loss of Inverter System, the unit is 0.1 Volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 1170-1270, 1150 1220-1320, 1200 1270-1380, 2080 2200-2400, 2200 2330-2520, 2300 2440-2640, 2400 2540-2760
                           matConfInvSysOutputVoltLowLoss 1.3.6.1.4.1.935.10.2.1.5.4 nonnegativeinteger read-write
Output Voltage Low Loss of inverter System, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 890-1050, 1150 930-1100, 1200 1000-1140, 2080 1760-1980, 2200 1760-2090, 2300 1850-2180, 2400 1930-2280
                           matConfInvSysInputVolt 1.3.6.1.4.1.935.10.2.1.5.5 nonnegativeinteger read-write
Inverter System Input Voltage, the unit is 0.1 Volt. This value depends on matConfInvInputVoltage: matConfInvInputVoltage(0.1V)=480: Range(400-440), matConfInvInputVoltage(0.1V)=600: Range(500-550)
                           matConfInvSysPowerLimit 1.3.6.1.4.1.935.10.2.1.5.6 nonnegativeinteger read-write
Inverter System Power Limited level, format: xxx, range: 50 to 100, the unit is percent.
                           matConfInvSysLineVoltHighLoss 1.3.6.1.4.1.935.10.2.1.5.7 nonnegativeinteger read-write
High loss for line voltage of 3.5k inverter module, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 2080 2180-2650, 2200 2300-2650, 2300 2400-2650, 2400 2500-2650
                           matConfInvSysLineVoltLowLoss 1.3.6.1.4.1.935.10.2.1.5.8 nonnegativeinteger read-write
Low loss for line voltage of 3.5k inverter module, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 2080 1850-1980, 2200 1850-2100, 2300 1850-2200, 2400 1850-2300
                           matConfInvSysPriority 1.3.6.1.4.1.935.10.2.1.5.9 integer read-write
Priority for 3.5K inverter module. Enumeration: 'lineMode': 2, 'batteryMode': 1.
                           matConfInvSysFanSpeed 1.3.6.1.4.1.935.10.2.1.5.10 integer read-write
Inverter System fan speed. Enumeration: 'normalSpeed': 1, 'fullSpeed': 2.
                           matConfStsAcVoltHighLoss 1.3.6.1.4.1.935.10.2.1.5.11 nonnegativeinteger read-write
STS Module AC Voltage High Loss Volt, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 1170-1270, 1150 1220-1320, 1200 1270-1380, 2080 2200-2400, 2200 2330-2520, 2300 2440-2640, 2400 2540-2760
                           matConfStsAcVoltLowLoss 1.3.6.1.4.1.935.10.2.1.5.12 nonnegativeinteger read-write
STS Module AC Voltage Low Loss Volt, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 890-1050, 1150 930-1100, 1200 1000-1140, 2080 1760-1980, 2200 1760-2090, 2300 1850-2180, 2400 1930-2280
                           matConfStsIpvVoltHighLoss 1.3.6.1.4.1.935.10.2.1.5.13 nonnegativeinteger read-write
STS module Inverter IPV High Loss Volt, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 1170-1270, 1150 1220-1320, 1200 1270-1380, 2080 2200-2400, 2200 2330-2520, 2300 2440-2640, 2400 2540-2760
                           matConfStsIpvVoltLowLoss 1.3.6.1.4.1.935.10.2.1.5.14 nonnegativeinteger read-write
STS module Inverter IPV low Loss Volt, the unit is 0.1 volt. This value depends on matConfInvSysOutputVolt, the least significant digit must be zero, see table: matConfInvSysOutputVolt(0.1V) Range(0.1V) 1100 890-1050, 1150 930-1100, 1200 1000-1140, 2080 1760-1980, 2200 1760-2090, 2300 1850-2180, 2400 1930-2280
                           matConfStsPriority 1.3.6.1.4.1.935.10.2.1.5.15 integer read-write
STS output priority. Enumeration: 'offLine': 2, 'onLine': 1.
                           matConfStsFanSpeed 1.3.6.1.4.1.935.10.2.1.5.16 integer read-write
STS fan speed. Enumeration: 'normalSpeed': 1, 'fullSpeed': 2.
                       matTrapTargets 1.3.6.1.4.1.935.10.2.1.6
                           matTrapTargetsNum 1.3.6.1.4.1.935.10.2.1.6.1 integer read-only
The number of trap targets.
                           matTrapTargetsTable 1.3.6.1.4.1.935.10.2.1.6.2 no-access
This table list the managers'IP to send traps to.
                               matTrapTargetsEntry 1.3.6.1.4.1.935.10.2.1.6.2.1 no-access
An entry containing information of one trap target.
                                   matTrapTargetsIndex 1.3.6.1.4.1.935.10.2.1.6.2.1.1 positiveinteger no-access
The index to a trap receiver entry
                                   matTrapTargetsAddress 1.3.6.1.4.1.935.10.2.1.6.2.1.2 displaystring read-write
The IP address of the manager to send a trap to.
                                   matTrapTargetsCommunity 1.3.6.1.4.1.935.10.2.1.6.2.1.3 displaystring read-write
The community name to use in the trap when sent to the manager.
                                   matTrapType 1.3.6.1.4.1.935.10.2.1.6.2.1.4 integer read-write
The type of trap to be received by the manager. Enumeration: 'none': 1, 'matTrap': 2.
                                   matTrapSeverityLevel 1.3.6.1.4.1.935.10.2.1.6.2.1.5 integer read-write
The severity level of traps to be received by this manager. Enumeration: 'major': 2, 'observe': 1, 'critical': 3.
                                   matTrapTargetsDesc 1.3.6.1.4.1.935.10.2.1.6.2.1.6 displaystring read-write
Description of trap receivers
                   matTraps 1.3.6.1.4.1.935.10.2.2
                         matInvFault 1.3.6.1.4.1.935.10.2.20.1
MAJOR: Inverter fault.
                         matReturnFromInvFault 1.3.6.1.4.1.935.10.2.20.2
OBSERVE: Return from Inverter fault.
                         matInvOverLoad 1.3.6.1.4.1.935.10.2.20.3
MAJOR: Inverter Over-loading.
                         matReturnFromInvOverLoad 1.3.6.1.4.1.935.10.2.20.4
OBSERVE: Return from Inverter Over-loading.
                         matInvFanFault 1.3.6.1.4.1.935.10.2.20.5
MAJOR: Inverter Fan fault.
                         matReturnFromInvFanFault 1.3.6.1.4.1.935.10.2.20.6
OBSERVE: Return from Inverter Fan fault.
                         matInvTempPowerLimit 1.3.6.1.4.1.935.10.2.20.7
MAJOR: Inverter power limit.
                         matReturnFromInvTempPowerLimit 1.3.6.1.4.1.935.10.2.20.8
OBSERVE: Return from Inverter power limit.
                         matInvInputAbnormal 1.3.6.1.4.1.935.10.2.20.9
MAJOR: Inverter input abnormal.
                         matReturnFromInvInputAbnormal 1.3.6.1.4.1.935.10.2.20.10
OBSERVEReturn from Inverter input abnormal.
                         matInvLowInputShutdown 1.3.6.1.4.1.935.10.2.20.11
MAJOR: Inverter shut down due to low input voltage.
                         matReturnFromInvLowInputShutdown 1.3.6.1.4.1.935.10.2.20.12
OBSERVE: Return from Inverter shut down due to low input voltage.
                         matInvNotRespond 1.3.6.1.4.1.935.10.2.20.13
CRITICAL: Inverter disconnected.
                         matReturnFromInvNotRespond 1.3.6.1.4.1.935.10.2.20.14
OBSERVE: Inverter connected.
                         matInvBusVoltageOverLimit 1.3.6.1.4.1.935.10.2.20.15
CRITICAL: Inverter Bus voltage over the maximal level.
                         matReturnFromInvBusVoltOverLimit 1.3.6.1.4.1.935.10.2.20.16
OBSERVE: Return from Inverter Bus voltage over the maximal level.
                         matInvBusVoltageUnderLimit 1.3.6.1.4.1.935.10.2.20.17
CRITICAL: Inverter Bus volt under the minimal level.
                         matReturnFromInvBusVoltUnderLimit 1.3.6.1.4.1.935.10.2.20.18
OBSERVE: Return from Inverter Bus volt under the minimal level.
                         matInvBusSoftFail 1.3.6.1.4.1.935.10.2.20.19
CRITICAL: Inverter Bus Soft Start Fail.
                         matReturnFromInvBusSoftFail 1.3.6.1.4.1.935.10.2.20.20
OBSERVE: Return from Inverter Bus Soft Start Fail.
                         matInvOutputShort 1.3.6.1.4.1.935.10.2.20.21
CRITICAL: Inverter Output Short.
                         matReturnFromInvOutputShort 1.3.6.1.4.1.935.10.2.20.22
OBSERVE: Return from Inverter Output Short.
                         matInvOutputVoltLow 1.3.6.1.4.1.935.10.2.20.23
CRITICAL: Inverter output voltage low.
                         matReturnFromInvOutputVoltLow 1.3.6.1.4.1.935.10.2.20.24
OBSERVE: Return from Inverter output voltage low.
                         matInvOutputVoltHigh 1.3.6.1.4.1.935.10.2.20.25
CRITICAL: Inverter output voltage high.
                         matReturnFromInvOutputVoltHigh 1.3.6.1.4.1.935.10.2.20.26
OBSERVE: Return from Inverter output voltage high.
                         matInvTemperatureHigh 1.3.6.1.4.1.935.10.2.20.27
CRITICAL: Inverter Temperature High.
                         matReturnFromInvTemperatureHigh 1.3.6.1.4.1.935.10.2.20.28
OBSERVE: Return from Inverter Temperature High.
                         matInvNegativePowerProtect 1.3.6.1.4.1.935.10.2.20.29
CRITICAL: Inverter negative power protection.
                         matReturnFromInvNegativePowerProtect 1.3.6.1.4.1.935.10.2.20.30
OBSERVE: Return from Inverter negative power protection.
                         matInvPulseFault 1.3.6.1.4.1.935.10.2.20.31
CRITICAL: Inverter Sync Pulse Fault.
                         matReturnFromInvPulseFault 1.3.6.1.4.1.935.10.2.20.32
OBSERVE: Return from Inverter Sync Pulse Fault.
                         matInvEPOShutdown 1.3.6.1.4.1.935.10.2.20.33
CRITICAL: Inverter EPO shutdown.
                         matReturnFromInvEPOShutdown 1.3.6.1.4.1.935.10.2.20.34
OBSERVE: Return from Inverter EPO shutdown.
                         matInvSoftStartFail 1.3.6.1.4.1.935.10.2.20.35
CRITICAL: Inverter soft start fail.
                         matReturnFromInvSoftStartFail 1.3.6.1.4.1.935.10.2.20.36
OBSERVE: Return from Inverter soft start fail.
                         matInvEEPROMFault 1.3.6.1.4.1.935.10.2.20.37
MAJOR: Inverter EEPROM fault.
                         matReturnFromInvEEPROMFault 1.3.6.1.4.1.935.10.2.20.38
OBSERVE: Return from Inverter EEPROM fault.
                         matInvBypassSCRShort 1.3.6.1.4.1.935.10.2.20.39
CRITICAL: Inverter Bypass SCR Short.
                         matReturnFromInvBypassSCRShort 1.3.6.1.4.1.935.10.2.20.40
OBSERVE: Return from Inverter Bypass SCR Short.
                         matInvMBSPosError 1.3.6.1.4.1.935.10.2.20.41
CRITICAL: Inverter MBS Position Error.
                         matReturnFromInvMBSPosError 1.3.6.1.4.1.935.10.2.20.42
OBSERVE: Return from Inverter MBS Position Error.
                         matInvBackfeedRelayOpen 1.3.6.1.4.1.935.10.2.20.43
CRITICAL: Inverter Backfeed Relay Open.
                         matReturnFromInvBackfeedRelayOpen 1.3.6.1.4.1.935.10.2.20.44
OBSERVE: Return from Inverter Backfeed Relay Open.
                         matInvHardwareError 1.3.6.1.4.1.935.10.2.20.45
CRITICAL: Inverter Hardware Detection Error.
                         matReturnFromInvHardwareError 1.3.6.1.4.1.935.10.2.20.46
OBSERVE: Return from Inverter Hardware Detection Error.
                         matInvMainUnavailable 1.3.6.1.4.1.935.10.2.20.47
MAJOR: Inverter Mains Unavailable.
                         matReturnFromInvMainUnavailable 1.3.6.1.4.1.935.10.2.20.48
OBSERVE: Return from Inverter Mains Unavailable.
                         matInvMaintenaceBypass 1.3.6.1.4.1.935.10.2.20.49
MAJOR: Inverter Maintenance Bypass.
                         matReturnFromInvMaintenaceBypass 1.3.6.1.4.1.935.10.2.20.50
OBSERVE: Return from Inverter Maintenance Bypass.
                         matStsBypassUnavailable 1.3.6.1.4.1.935.10.2.20.51
MAJOR: STS Bypass unavailable.
                         matReturnFromStsBypassUnavailable 1.3.6.1.4.1.935.10.2.20.52
OBSERVE: Return from STS Bypass unavailable.
                         matStsBackfeedRelayOpen 1.3.6.1.4.1.935.10.2.20.53
MAJOR: STS Back-feed relay open.
                         matReturnFromStsBackfeedRelayOpen 1.3.6.1.4.1.935.10.2.20.54
OBSERVE: Return from STS Back-feed relay open.
                         matStsScr1ShortCurcuit 1.3.6.1.4.1.935.10.2.20.55
CRITICAL: STS SCR1 short circuit.
                         matReturnFromStsScr1ShortCurcuit 1.3.6.1.4.1.935.10.2.20.56
OBSERVE: Return from STS SCR1 short circuit.
                         matStsScr2ShortCurcuit 1.3.6.1.4.1.935.10.2.20.57
CRITICAL: STS SCR2 short circuit.
                         matReturnFromStsScr2ShortCurcuit 1.3.6.1.4.1.935.10.2.20.58
OBSERVE: Return from STS SCR2 short circuit.
                         matStsFaultMode 1.3.6.1.4.1.935.10.2.20.59
CRITICAL: STS running in fault mode.
                         matReturnFromStsFaultMode 1.3.6.1.4.1.935.10.2.20.60
OBSERVE: Return from STS running in fault mode.
                         matStsFanFault 1.3.6.1.4.1.935.10.2.20.61
MAJOR: STS fan fault.
                         matReturnFromStsFanFault 1.3.6.1.4.1.935.10.2.20.62
OBSERVE: Return from STS fan fault.
                         matStsEEPROMFault 1.3.6.1.4.1.935.10.2.20.63
MAJOR: STS EEPROM fault.
                         matReturnFromStsEEPROMFault 1.3.6.1.4.1.935.10.2.20.64
OBSERVE: Return from STS EEPROM fault.
                         matStsInvFail 1.3.6.1.4.1.935.10.2.20.65
MAJOR: STS Inverter unavailable.
                         matReturnFromStsInvFail 1.3.6.1.4.1.935.10.2.20.66
OBSERVE: Return from STS Inverter unavailable.
                         matStsMainsFail 1.3.6.1.4.1.935.10.2.20.67
MAJOR: STS Mains unavailable.
                         matReturnFromStsMainFail 1.3.6.1.4.1.935.10.2.20.68
OBSERVE: Return from STS Mains unavailable.
                         matStsOverLoad 1.3.6.1.4.1.935.10.2.20.69
MAJOR: STS Output over load.
                         matReturnFromStsOverLoad 1.3.6.1.4.1.935.10.2.20.70
OBSERVE: Return from STS Output over load.
                         matStsOutputShortCircuit 1.3.6.1.4.1.935.10.2.20.71
CRITICAL: STS Output short circuit.
                         matReturnFromStsOutputShortCircuit 1.3.6.1.4.1.935.10.2.20.72
OBSERVE: Return from STS Output short circuit.
                         matStsInvBypassMode 1.3.6.1.4.1.935.10.2.20.73
CRITICAL: STS Inverter bypass mode.
                         matReturnFromStsInvBypassMode 1.3.6.1.4.1.935.10.2.20.74
OBSERVE: Return from STS Inverter bypass mode.
                         matStsTemperatureHigh 1.3.6.1.4.1.935.10.2.20.75
MAJOR: STS temperature high.
                         matReturnFromStsTemperatureHigh 1.3.6.1.4.1.935.10.2.20.76
OBSERVE: Return from STS temperature high.
                         matStsMBSPosFault 1.3.6.1.4.1.935.10.2.20.77
CRITICAL: STS MBS in abnormal position.
                         matReturnFromStsMBSPosFault 1.3.6.1.4.1.935.10.2.20.78
OBSERVE: Return from STS MBS in abnormal position.
                         matStsControlPowerFail 1.3.6.1.4.1.935.10.2.20.79
CRITICAL: STS Control power fail.
                         matReturnFromStsControlPowerFail 1.3.6.1.4.1.935.10.2.20.80
OBSERVE: Return from STS Control power fail.
                         matStsNotRespond 1.3.6.1.4.1.935.10.2.20.81
CRITICAL: STS disconnected.
                         matReturnFromStsNotRespond 1.3.6.1.4.1.935.10.2.20.82
OBSERVE: STS connected.
                         matStsOutputAbnormal 1.3.6.1.4.1.935.10.2.20.83
MAJOR: STS Output abnormal.
                         matReturnFromStsOutputAbnormal 1.3.6.1.4.1.935.10.2.20.84
OBSERVE: Return from STS Output abnormal.
                         matStsMaintenanceBypass 1.3.6.1.4.1.935.10.2.20.85
MAJOR: STS Maintenance Bypass.
                         matReturnFromStsMaintenanceBypass 1.3.6.1.4.1.935.10.2.20.86
OBSERVE: Return from STS Maintenance Bypass.
                         matConBatteryLow 1.3.6.1.4.1.935.10.2.20.87
CRITICAL: Controller Battery Low.
                         matReturnFromConBatteryLow 1.3.6.1.4.1.935.10.2.20.88
OBSERVE: Return from Controller Battery Low.
                         matConTemperatureHigh 1.3.6.1.4.1.935.10.2.20.89
CRITICAL: Controller temperature High.
                         matReturnFromConTemperatureHigh 1.3.6.1.4.1.935.10.2.20.90
OBSERVE: Return from Controller temperature High.
                         matConEEPROMFault 1.3.6.1.4.1.935.10.2.20.91
MAJOR: Controller EEPROM fault.
                         matReturnFromConEEPROMFault 1.3.6.1.4.1.935.10.2.20.92
OBSERVE: Return from Controller EEPROM fault.
                         matConBatteryVoltHigh 1.3.6.1.4.1.935.10.2.20.93
CRITICAL: Controller Battery voltage high.
                         matReturnFromConBatteryVoltHigh 1.3.6.1.4.1.935.10.2.20.94
OBSERVE: Return from Controller Battery voltage high.
                         matConCanBusOff 1.3.6.1.4.1.935.10.2.20.95
CRITICAL: Controller CAN bus off.
                         matReturnFromConCanBusOff 1.3.6.1.4.1.935.10.2.20.96
OBSERVE: Return from Controller CAN bus off.
                         matConCommunicationLost 1.3.6.1.4.1.935.10.2.20.97
CRITICAL: Controller communication lost.
                         matReturnFromCommunicationLost 1.3.6.1.4.1.935.10.2.20.98
OBSERVE: Return from Controller communication lost.